summaryrefslogtreecommitdiff
path: root/include/soc
AgeCommit message (Collapse)AuthorFilesLines
2023-04-29Merge tag 'clk-for-linus' of ↵Linus Torvalds1-0/+17
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "Nothing looks out of the ordinary in this batch of clk driver updates. There are a couple patches to the core clk framework, but they're all basically cleanups or debugging aids. The driver updates and new additions are dominated in the diffstat by Qualcomm and MediaTek drivers. Qualcomm gained a handful of new drivers for various SoCs, and MediaTek gained a bunch of drivers for MT8188. The MediaTek drivers are being modernized as well, so there are updates all over that vendor's clk drivers. There's also a couple other new clk drivers in here, for example the Starfive JH7110 SoC support is added. Outside of the two major SoC vendors though, we have the usual collection of non-critical fixes and cleanups to various clk drivers. It's good to see that we're getting more cleanups and modernization patches. Maybe one day we'll be able to properly split clk providers from clk consumers. Core: - Print an informational message before disabling unused clks New Drivers: - BCM63268 timer clock and reset controller - Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and MT8195 SoCs - Mediatek MT8188 SoC clk drivers - Clock driver for Sunplus SP7021 SoC - Clk driver support for Loongson-2 SoCs - Clock driver for Skyworks Si521xx I2C PCIe clock generators - Initial Starfive JH7110 clk/reset support - Global clock controller drivers for Qualcomm SM7150, IPQ9574, MSM8917 and IPQ5332 SoCs - GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P SoCs Updates: - Shrink size of clk_fractional_divider a little - Convert various clk drivers to devm_of_clk_add_hw_provider() - Convert platform clk drivers to remove_new() - Converted most Mediatek clock drivers to struct platform_driver - MediaTek clock drivers can be built as modules - Reimplement Loongson-1 clk driver with DT support - Migrate socfpga clk driver to of_clk_add_hw_provider() - Support for i3c clks on Aspeed ast2600 SoCs - Add clock generic devm_clk_hw_register_gate_parent_data - Add audiomix block control for i.MX8MP - Add support for determine_rate to i.MX composite-8m - Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate - Provide clock name in error message for clk-gpr-mux on get parent failure - Drop duplicate imx_clk_mux_flags macro - Register the i.MX8MP Media Disp2 Pix clock as bus clock - Add Media LDB root clock to i.MX8MP - Make i.MX8MP nand_usdhc_bus clock as non-critical - Fix the rate table for i.MX fracn-gppll - Disable HW control for the fracn-gppll in order to be controlled by register write - Add support for interger PLL in fracn-gppll - Add mcore_booted module parameter to i.MX93 provider - Add NIC, A55 and ARM PLL clocks to i.MX93 - Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents - Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP to get more accurate clock rates - Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical - Update some of the i.MX critical clocks flags to allow glitchless on-the-fly rate change. - Add I2C5 clock on Renesas R-Car V3H - Exynos850: Add CMU_G3D clock controller for the Mali GPU - Extract Exynos5433 (ARM64) clock controller power management code to common driver parts - Exynos850: make PMU_ALIVE_PCLK clock critical - Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car V4H - Add video capture (VIN) clocks on Renesas R-Car V3H - Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H - Support for Stromer Plus PLL on Qualcomm IPQ5332 - Add a missing reset to Qualcomm QCM2290 - Migrate Qualcomm IPQ4019 to clk_parent_data - Make USB GDSCs enter retention state when disabled on Qualcomm SM6375, MSM8996 and MSM8998 SoCs - Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk - Add two EMAC GDSCs on Qualcomm SC8280XP - Use shared rcg clk ops in Qualcomm SM6115 GCC - Park Qualcomm SM8350 PCIe PIPE clks when disabled - Add GDSCs to Qualcomm SC7280 LPASS audio clock controller - Add missing XO clocks to Qualcomm MSM8226 and MSM8974 - Convert some Qualcomm clk DT bindings to YAML - Reparenting fix for the clock supplying camera modules on Rockchip rk3399 - Mark more critical (bus-)clocks on Rockchip rk3588" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (290 commits) clk: qcom: gcc-sc8280xp: Add EMAC GDSCs clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers clk: rockchip: rk3588: make gate linked clocks critical clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk clk: qcom: add the GPUCC driver for sa8775p dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property clk: starfive: Avoid casting iomem pointers clk: microchip: fix potential UAF in auxdev release callback clk: qcom: rpm: Use managed `of_clk_add_hw_provider()` clk: mediatek: fhctl: Mark local variables static clk: sifive: make SiFive clk drivers depend on ARCH_ symbols clk: uniphier: Use managed `of_clk_add_hw_provider()` clk: si5351: Use managed `of_clk_add_hw_provider()` clk: si570: Use managed `of_clk_add_hw_provider()` clk: si514: Use managed `of_clk_add_hw_provider()` clk: lmk04832: Use managed `of_clk_add_hw_provider()` ...
2023-04-29Merge tag 'timers-core-2023-04-28' of ↵Linus Torvalds1-7/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more timer updates from Thomas Gleixner: "Timekeeping and clocksource/event driver updates the second batch: - A trivial documentation fix in the timekeeping core - A really boring set of small fixes, enhancements and cleanups in the drivers code. No new clocksource/clockevent drivers for a change" * tag 'timers-core-2023-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Fix references to nonexistent ktime_get_fast_ns() dt-bindings: timer: rockchip: Add rk3588 compatible dt-bindings: timer: rockchip: Drop superfluous rk3288 compatible clocksource/drivers/ti: Use of_property_read_bool() for boolean properties clocksource/drivers/timer-ti-dm: Fix finding alwon timer clocksource/drivers/davinci: Fix memory leak in davinci_timer_register when init fails clocksource/drivers/stm32-lp: Drop of_match_ptr for ID table clocksource/drivers/timer-ti-dm: Convert to platform remove callback returning void clocksource/drivers/timer-tegra186: Convert to platform remove callback returning void clocksource/drivers/timer-ti-dm: Improve error message in .remove clocksource/drivers/timer-stm32-lp: Mark driver as non-removable clocksource/drivers/sh_mtu2: Mark driver as non-removable clocksource/drivers/timer-ti-dm: Use of_address_to_resource() clocksource/drivers/timer-imx-gpt: Remove non-DT function clocksource/drivers/timer-mediatek: Split out CPUXGPT timers clocksource/drivers/exynos_mct: Explicitly return 0 for shared timer
2023-04-27Merge tag 'sound-6.4-rc1' of ↵Linus Torvalds1-0/+71
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "At this time, it's an interesting mixture of changes for both old and new stuff. Majority of changes are about ASoC (lots of systematic changes for converting remove callbacks to void, and cleanups), while we got the fixes and the enhancements of very old PCI cards, too. Here are some highlights: ALSA/ASoC Core: - Continued effort of more ASoC core cleanups - Minor improvements for XRUN handling in indirect PCM helpers - Code refactoring of PCM core code ASoC: - Continued feature and simplification work on SOF, including addition of a no-DSP mode for bringup, HDA MLink and extensions to the IPC4 protocol - Hibernation support for CS35L45 - More DT binding conversions - Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363, nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas R-Car Gen4, Rockchip RK3588 and TI TAS5733 ALSA: - Lots of works for legacy emu10k1 and ymfpci PCI drivers - PCM kselftest fixes and enhancements" * tag 'sound-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (586 commits) ALSA: emu10k1: use high-level I/O in set_filterQ() ALSA: emu10k1: use high-level I/O functions also during init ALSA: emu10k1: fix error handling in snd_audigy_i2c_volume_put() ALSA: emu10k1: don't stop DSP in _snd_emu10k1_{,audigy_}init_efx() ALSA: emu10k1: fix SNDRV_EMU10K1_IOCTL_SINGLE_STEP ALSA: emu10k1: skip Sound Blaster-specific hacks for E-MU cards ALSA: emu10k1: fixup DSP defines ALSA: emu10k1: pull in some register definitions from kX-project ALSA: emu10k1: remove some bogus defines ALSA: emu10k1: eliminate some unused defines ALSA: emu10k1: fix lineup of EMU_HANA_* defines ALSA: emu10k1: comment updates ALSA: emu10k1: fix snd_emu1010_fpga_read() input masking for rev2 cards ALSA: emu10k1: remove unused emu->pcm_playback_efx_substream field ALSA: emu10k1: remove unused `resume` parameter from snd_emu10k1_init() ALSA: emu10k1: minor optimizations ALSA: emu10k1: remove remaining cruft from snd_emu10k1_emu1010_init() ALSA: emu10k1: remove apparently pointless EMU_HANA_OPTION_CARDS reads ALSA: emu10k1: remove apparently pointless FPGA reads ALSA: emu10k1: stop doing weird things with HCFG in snd_emu10k1_emu1010_init() ...
2023-04-26Merge tag 'net-next-6.4' of ↵Linus Torvalds1-11/+29
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the default value allows for better BIG TCP performances - Reduce compound page head access for zero-copy data transfers - RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible - Threaded NAPI improvements, adding defer skb free support and unneeded softirq avoidance - Address dst_entry reference count scalability issues, via false sharing avoidance and optimize refcount tracking - Add lockless accesses annotation to sk_err[_soft] - Optimize again the skb struct layout - Extends the skb drop reasons to make it usable by multiple subsystems - Better const qualifier awareness for socket casts BPF: - Add skb and XDP typed dynptrs which allow BPF programs for more ergonomic and less brittle iteration through data and variable-sized accesses - Add a new BPF netfilter program type and minimal support to hook BPF programs to netfilter hooks such as prerouting or forward - Add more precise memory usage reporting for all BPF map types - Adds support for using {FOU,GUE} encap with an ipip device operating in collect_md mode and add a set of BPF kfuncs for controlling encap params - Allow BPF programs to detect at load time whether a particular kfunc exists or not, and also add support for this in light skeleton - Bigger batch of BPF verifier improvements to prepare for upcoming BPF open-coded iterators allowing for less restrictive looping capabilities - Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF programs to NULL-check before passing such pointers into kfunc - Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in local storage maps - Enable RCU semantics for task BPF kptrs and allow referenced kptr tasks to be stored in BPF maps - Add support for refcounted local kptrs to the verifier for allowing shared ownership, useful for adding a node to both the BPF list and rbtree - Add BPF verifier support for ST instructions in convert_ctx_access() which will help new -mcpu=v4 clang flag to start emitting them - Add ARM32 USDT support to libbpf - Improve bpftool's visual program dump which produces the control flow graph in a DOT format by adding C source inline annotations Protocols: - IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value indicates the provenance of the IP address - IPv6: optimize route lookup, dropping unneeded R/W lock acquisition - Add the handshake upcall mechanism, allowing the user-space to implement generic TLS handshake on kernel's behalf - Bridge: support per-{Port, VLAN} neighbor suppression, increasing resilience to nodes failures - SCTP: add support for Fair Capacity and Weighted Fair Queueing schedulers - MPTCP: delay first subflow allocation up to its first usage. This will allow for later better LSM interaction - xfrm: Remove inner/outer modes from input/output path. These are not needed anymore - WiFi: - reduced neighbor report (RNR) handling for AP mode - HW timestamping support - support for randomized auth/deauth TA for PASN privacy - per-link debugfs for multi-link - TC offload support for mac80211 drivers - mac80211 mesh fast-xmit and fast-rx support - enable Wi-Fi 7 (EHT) mesh support Netfilter: - Add nf_tables 'brouting' support, to force a packet to be routed instead of being bridged - Update bridge netfilter and ovs conntrack helpers to handle IPv6 Jumbo packets properly, i.e. fetch the packet length from hop-by-hop extension header. This is needed for BIT TCP support - The iptables 32bit compat interface isn't compiled in by default anymore - Move ip(6)tables builtin icmp matches to the udptcp one. This has the advantage that icmp/icmpv6 match doesn't load the iptables/ip6tables modules anymore when iptables-nft is used - Extended netlink error report for netdevice in flowtables and netdev/chains. Allow for incrementally add/delete devices to netdev basechain. Allow to create netdev chain without device Driver API: - Remove redundant Device Control Error Reporting Enable, as PCI core has already error reporting enabled at enumeration time - Move Multicast DB netlink handlers to core, allowing devices other then bridge to use them - Allow the page_pool to directly recycle the pages from safely localized NAPI - Implement lockless TX queue stop/wake combo macros, allowing for further code de-duplication and sanitization - Add YNL support for user headers and struct attrs - Add partial YNL specification for devlink - Add partial YNL specification for ethtool - Add tc-mqprio and tc-taprio support for preemptible traffic classes - Add tx push buf len param to ethtool, specifies the maximum number of bytes of a transmitted packet a driver can push directly to the underlying device - Add basic LED support for switch/phy - Add NAPI documentation, stop relaying on external links - Convert dsa_master_ioctl() to netdev notifier. This is a preparatory work to make the hardware timestamping layer selectable by user space - Add transceiver support and improve the error messages for CAN-FD controllers New hardware / drivers: - Ethernet: - AMD/Pensando core device support - MediaTek MT7981 SoC - MediaTek MT7988 SoC - Broadcom BCM53134 embedded switch - Texas Instruments CPSW9G ethernet switch - Qualcomm EMAC3 DWMAC ethernet - StarFive JH7110 SoC - NXP CBTX ethernet PHY - WiFi: - Apple M1 Pro/Max devices - RealTek rtl8710bu/rtl8188gu - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset - Bluetooth: - Realtek RTL8821CS, RTL8851B, RTL8852BS - Mediatek MT7663, MT7922 - NXP w8997 - Actions Semi ATS2851 - QTI WCN6855 - Marvell 88W8997 - Can: - STMicroelectronics bxcan stm32f429 Drivers: - Ethernet NICs: - Intel (1G, icg): - add tracking and reporting of QBV config errors - add support for configuring max SDU for each Tx queue - Intel (100G, ice): - refactor mailbox overflow detection to support Scalable IOV - GNSS interface optimization - Intel (i40e): - support XDP multi-buffer - nVidia/Mellanox: - add the support for linux bridge multicast offload - enable TC offload for egress and engress MACVLAN over bond - add support for VxLAN GBP encap/decap flows offload - extend packet offload to fully support libreswan - support tunnel mode in mlx5 IPsec packet offload - extend XDP multi-buffer support - support MACsec VLAN offload - add support for dynamic msix vectors allocation - drop RX page_cache and fully use page_pool - implement thermal zone to report NIC temperature - Netronome/Corigine: - add support for multi-zone conntrack offload - Solarflare/Xilinx: - support offloading TC VLAN push/pop actions to the MAE - support TC decap rules - support unicast PTP - Other NICs: - Broadcom (bnxt): enforce software based freq adjustments only on shared PHC NIC - RealTek (r8169): refactor to addess ASPM issues during NAPI poll - Micrel (lan8841): add support for PTP_PF_PEROUT - Cadence (macb): enable PTP unicast - Engleder (tsnep): add XDP socket zero-copy support - virtio-net: implement exact header length guest feature - veth: add page_pool support for page recycling - vxlan: add MDB data path support - gve: add XDP support for GQI-QPL format - geneve: accept every ethertype - macvlan: allow some packets to bypass broadcast queue - mana: add support for jumbo frame - Ethernet high-speed switches: - Microchip (sparx5): Add support for TC flower templates - Ethernet embedded switches: - Broadcom (b54): - configure 6318 and 63268 RGMII ports - Marvell (mv88e6xxx): - faster C45 bus scan - Microchip: - lan966x: - add support for IS1 VCAP - better TX/RX from/to CPU performances - ksz9477: add ETS Qdisc support - ksz8: enhance static MAC table operations and error handling - sama7g5: add PTP capability - NXP (ocelot): - add support for external ports - add support for preemptible traffic classes - Texas Instruments: - add CPSWxG SGMII support for J7200 and J721E - Intel WiFi (iwlwifi): - preparation for Wi-Fi 7 EHT and multi-link support - EHT (Wi-Fi 7) sniffer support - hardware timestamping support for some devices/firwmares - TX beacon protection on newer hardware - Qualcomm 802.11ax WiFi (ath11k): - MU-MIMO parameters support - ack signal support for management packets - RealTek WiFi (rtw88): - SDIO bus support - better support for some SDIO devices (e.g. MAC address from efuse) - RealTek WiFi (rtw89): - HW scan support for 8852b - better support for 6 GHz scanning - support for various newer firmware APIs - framework firmware backwards compatibility - MediaTek WiFi (mt76): - P2P support - mesh A-MSDU support - EHT (Wi-Fi 7) support - coredump support" * tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits) net: phy: hide the PHYLIB_LEDS knob net: phy: marvell-88x2222: remove unnecessary (void*) conversions tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp. net: amd: Fix link leak when verifying config failed net: phy: marvell: Fix inconsistent indenting in led_blink_set lan966x: Don't use xdp_frame when action is XDP_TX tsnep: Add XDP socket zero-copy TX support tsnep: Add XDP socket zero-copy RX support tsnep: Move skb receive action to separate function tsnep: Add functions for queue enable/disable tsnep: Rework TX/RX queue initialization tsnep: Replace modulo operation with mask net: phy: dp83867: Add led_brightness_set support net: phy: Fix reading LED reg property drivers: nfc: nfcsim: remove return value check of `dev_dir` net: phy: dp83867: Remove unnecessary (void*) conversions net: ethtool: coalesce: try to make user settings stick twice net: mana: Check if netdev/napi_alloc_frag returns single page net: mana: Rename mana_refill_rxoob and remove some empty lines net: veth: add page_pool stats ...
2023-04-24clocksource/drivers/timer-imx-gpt: Remove non-DT functionFabio Estevam1-7/+0
mxc_timer_init() was originally only used by non-DT i.MX platforms. i.MX has already been converted to be a DT-only platform. Remove the unused mxc_timer_init() function. Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230307124313.708255-1-festevam@denx.de
2023-04-17net: mscc: ocelot: add support for preemptible traffic classesVladimir Oltean1-0/+3
In order to not transmit (preemptible) frames which will be received by the link partner as corrupted (because it doesn't support FP), the hardware requires the driver to program the QSYS_PREEMPTION_CFG_P_QUEUES register only after the MAC Merge layer becomes active (verification succeeds, or was disabled). There are some cases when FP is known (through experimentation) to be broken. Give priority to FP over cut-through switching, and disable FP for known broken link modes. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-17net: mscc: ocelot: add support for mqprio offloadVladimir Oltean1-0/+4
This doesn't apply anything to hardware and in general doesn't do anything that the software variant doesn't do, except for checking that there isn't more than 1 TXQ per TC (TXQs for a DSA switch are a dubious concept anyway). The reason we add this is to be able to parse one more field added to struct tc_mqprio_qopt_offload, namely preemptible_tcs. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-17net: mscc: ocelot: optimize ocelot_mm_irq()Vladimir Oltean1-0/+1
The MAC Merge IRQ of all ports is shared with the PTP TX timestamp IRQ of all ports, which means that currently, when a PTP TX timestamp is generated, felix_irq_handler() also polls for the MAC Merge layer status of all ports, looking for changes. This makes the kernel do more work, and under certain circumstances may make ptp4l require a tx_timestamp_timeout argument higher than before. Changes to the MAC Merge layer status are only to be expected under certain conditions - its TX direction needs to be enabled - so we can check early if that is the case, and omit register access otherwise. Make ocelot_mm_update_port_status() skip register access if mm->tx_enabled is unset, and also call it once more, outside IRQ context, from ocelot_port_set_mm(), when mm->tx_enabled transitions from true to false, because an IRQ is also expected in that case. Also, a port may have its MAC Merge layer enabled but it may not have generated the interrupt. In that case, there's no point in writing to DEV_MM_STATUS to acknowledge that IRQ. We can reduce the number of register writes per port with MM enabled by keeping an "ack" variable which writes the "write-one-to-clear" bits. Those are 3 in number: PRMPT_ACTIVE_STICKY, UNEXP_RX_PFRM_STICKY and UNEXP_TX_PFRM_STICKY. The other fields in DEV_MM_STATUS are read-only and it doesn't matter what is written to them, so writing zero is just fine. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-17net: mscc: ocelot: remove struct ocelot_mm_state :: lockVladimir Oltean1-1/+0
Unfortunately, the workarounds for the hardware bugs make it pointless to keep fine-grained locking for the MAC Merge state of each port. Our vsc9959_cut_through_fwd() implementation requires ocelot->fwd_domain_lock to be held, in order to serialize with changes to the bridging domains and to port speed changes (which affect which ports can be cut-through). Simultaneously, the traffic classes which can be cut-through cannot be preemptible at the same time, and this will depend on the MAC Merge layer state (which changes from threaded interrupt context). Since vsc9959_cut_through_fwd() would have to hold the mm->lock of all ports for a correct and race-free implementation with respect to ocelot_mm_irq(), in practice it means that any time a port's mm->lock is held, it would potentially block holders of ocelot->fwd_domain_lock. In the interest of simple locking rules, make all MAC Merge layer state changes (and preemptible traffic class changes) be serialized by the ocelot->fwd_domain_lock. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-17net: mscc: ocelot: export a single ocelot_mm_irq()Vladimir Oltean1-1/+1
When the switch emits an IRQ, we don't know what caused it, and we iterate through all ports to check the MAC Merge status. Move that iteration inside the ocelot lib; we will change the locking in a future change and it would be good to encapsulate that lock completely within the ocelot lib. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-13net: mscc: ocelot: strengthen type of "u32 reg" in I/O accessorsVladimir Oltean1-9/+11
The "u32 reg" argument that is passed to these functions is not a plain address, but rather a driver-specific encoding of another enum ocelot_target target in the upper bits, and an index into the u32 ocelot->map[target][] array in the lower bits. That encoded value takes the type "enum ocelot_reg" and is what is passed to these I/O functions, so let's actually use that to prevent type confusion. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-13clk: starfive: Avoid casting iomem pointersStephen Boyd1-0/+17
Let's use a wrapper struct for the auxiliary_device made in jh7110_reset_controller_register() so that we can stop casting iomem pointers. The casts trip up tools like sparse, and make for some awkward casts that are largely unnecessary. While we're here, change the allocation from devm and actually free the auxiliary_device memory in the release function. This avoids any use after free problems where the parent device driver is unbound from the device but the auxiliuary_device is still in use accessing devm freed memory. Cc: Tommaso Merciai <tomm.merciai@gmail.com> Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com> Cc: Hal Feng <hal.feng@starfivetech.com> Cc: Conor Dooley <conor.dooley@microchip.com> Cc: Xingyu Wu <xingyu.wu@starfivetech.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Fixes: edab7204afe5 ("clk: starfive: Add StarFive JH7110 system clock driver") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20230413205528.4044216-1-sboyd@kernel.org
2023-04-07soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driverAbel Vesa1-0/+37
This takes the already existing duplicated support in both ufs-qcom and sdhci-msm drivers and makes it a dedicated driver that can be used by both mentioned drivers. The reason for this is because, staring with SM8550, the ICE IP block is shared between UFS and SDCC, which means we need to probe a dedicated device and share it between those two consumers. So let's add the ICE dedicated driver as a soc driver. Platforms that already have ICE supported, will use it as a library as the of_qcom_ice_get will return an ICE instance created for the consumer device. This allows the backwards compatibility with old-style devicetree approach. Also, add support to HW version 4.x since it works out-of-the-box with the current driver. The 4.x HW version is found on SM8550 platform. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407105029.2274111-4-abel.vesa@linaro.org
2023-03-20net: mscc: ocelot: expose serdes configuration functionColin Foster1-0/+4
During chip initialization, ports that use SGMII / QSGMII to interface to external phys need to be configured on the VSC7513 and VSC7514. Expose this configuration routine, so it can be used by DSA drivers. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-20net: mscc: ocelot: expose generic phylink_mac_config routineColin Foster1-0/+3
The ocelot-switch driver can utilize the phylink_mac_config routine. Move this to the ocelot library location and export the symbol to make this possible. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-20net: mscc: ocelot: expose ocelot_pll5_init routineColin Foster1-0/+2
Ocelot chips have an internal PLL that must be used when communicating through external phys. Expose the init routine, so it can be used by other drivers. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-05soc: fsl: cpm1: Add support for QMCHerve Codina1-0/+71
The QMC (QUICC Multichannel Controller) emulates up to 64 channels within one serial controller using the same TDM physical interface routed from the TSA. It is available in some PowerQUICC SoC such as the MPC885 or MPC866. It is also available on some Quicc Engine SoCs. This current version support CPM1 SoCs only and some enhancement are needed to support Quicc Engine SoCs. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Acked-by: Li Yang <leoyang.li@nxp.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/r/20230217145645.1768659-7-herve.codina@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-06net: mscc: ocelot: un-export unused regmap symbolsColin Foster1-16/+0
There are no external users of the vsc7514_*_regmap[] symbols or vsc7514_vcap_* functions. They were exported in commit 32ecd22ba60b ("net: mscc: ocelot: split register definitions to a separate file") with the intention of being used, but the actual structure used in commit 2efaca411c96 ("net: mscc: ocelot: expose vsc7514_regmap definition") ended up being all that was needed. Bury these unnecessary symbols. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230204182056.25502-1-colin.foster@in-advantage.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-30net: mscc: ocelot: expose vsc7514_regmap definitionColin Foster1-0/+2
The VSC7514 target regmap is identical for ones shared with similar hardware, specifically the VSC7512. Share this resource, and change the name to match the pattern of other exported resources. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-30net: mscc: ocelot: expose ocelot_reset routineColin Foster1-0/+1
Resetting the switch core is the same whether it is done internally or externally. Move this routine to the ocelot library so it can be used by other drivers. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-30net: mscc: ocelot: expose vcap_props structureColin Foster1-0/+2
The vcap_props structure is common to other devices, specifically the VSC7512 chip that can only be controlled externally. Export this structure so it doesn't need to be recreated. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-30net: mscc: ocelot: expose regfield definition to be used by other driversColin Foster1-0/+2
The ocelot_regfields struct is common between several different chips, some of which can only be controlled externally. Export this structure so it doesn't have to be duplicated in these other drivers. Rename the structure as well, to follow the conventions of other shared resources. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-30net: mscc: ocelot: expose ocelot wm functionsColin Foster1-0/+5
Expose ocelot_wm functions so they can be shared with other drivers. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
Conflicts: drivers/net/ethernet/intel/ice/ice_main.c 418e53401e47 ("ice: move devlink port creation/deletion") 643ef23bd9dd ("ice: Introduce local var for readability") https://lore.kernel.org/all/20230127124025.0dacef40@canb.auug.org.au/ https://lore.kernel.org/all/20230124005714.3996270-1-anthony.l.nguyen@intel.com/ drivers/net/ethernet/engleder/tsnep_main.c 3d53aaef4332 ("tsnep: Fix TX queue stop/wake for multiple queues") 25faa6a4c5ca ("tsnep: Replace TX spin_lock with __netif_tx_lock") https://lore.kernel.org/all/20230127123604.36bb3e99@canb.auug.org.au/ net/netfilter/nf_conntrack_proto_sctp.c 13bd9b31a969 ("Revert "netfilter: conntrack: add sctp DATA_SENT state"") a44b7651489f ("netfilter: conntrack: unify established states for SCTP paths") f71cb8f45d09 ("netfilter: conntrack: sctp: use nf log infrastructure for invalid packets") https://lore.kernel.org/all/20230127125052.674281f9@canb.auug.org.au/ https://lore.kernel.org/all/d36076f3-6add-a442-6d4b-ead9f7ffff86@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-23net: mscc: ocelot: add MAC Merge layer support for VSC9959Vladimir Oltean2-0/+41
Felix (VSC9959) has a DEV_GMII:MM_CONFIG block composed of 2 registers (ENABLE_CONFIG and VERIF_CONFIG). Because the MAC Merge statistics and pMAC statistics are already in the Ocelot switch lib even if just Felix supports them, I'm adding support for the whole MAC Merge layer in the common Ocelot library too. There is an interrupt (shared with the PTP interrupt) which signals changes to the MM verification state. This is done because the preemptible traffic classes should be committed to hardware only once the verification procedure has declared the link partner of being capable of receiving preemptible frames. We implement ethtool getters and setters for the MAC Merge layer state. The "TX enabled" and "verify status" are taken from the IRQ handler, using a mutex to ensure serialized access. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-23net: mscc: ocelot: export ethtool MAC Merge stats for Felix VSC9959Vladimir Oltean1-0/+40
The Felix VSC9959 switch supports frame preemption and has a MAC Merge layer. In addition to the structured stats that exist for the eMAC, export the counters associated with its pMAC (pause, RMON, MAC, PHY, control) plus the high-level MAC Merge layer stats. The unstructured ethtool counters, as well as the rtnl_link_stats64 were left to report only the eMAC counters. Because statistics processing is quite self-contained in ocelot_stats.c now, I've opted for introducing an ocelot->mm_supported bool, based on which the common switch lib does everything, rather than pushing the TSN-specific code in felix_vsc9959.c, as happens for other TSN stuff. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-10firmware: raspberrypi: Fix type assignmentMaxime Ripard1-1/+1
We silently cast an unsigned int into a __le32 which makes sparse complain. Moreover, we never actually convert endianness between the CPU's and the expected little-endian value. Fix both at once by calling cpu_to_le32(). Fixes: 40c31955e4e9 ("firmware: raspberrypi: Provide a helper to query a clock max rate") Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20221116091712.1309651-3-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20230102115255.17802-1-maxime@cerno.tech Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-12-13Merge tag 'net-next-6.2' of ↵Linus Torvalds1-216/+0
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Allow live renaming when an interface is up - Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations - Add inet drop monitor support - A few GRO performance improvements - Add infrastructure for atomic dev stats, addressing long standing data races - De-duplicate common code between OVS and conntrack offloading infrastructure - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements - Netfilter: introduce packet parser for tunneled packets - Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs - Add the helper support for connection-tracking OVS offload BPF: - Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF - Make cgroup local storage available to non-cgroup attached BPF programs - Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers - A relevant bunch of BPF verifier fixes and improvements - Veristat tool improvements to support custom filtering, sorting, and replay of results - Add LLVM disassembler as default library for dumping JITed code - Lots of new BPF documentation for various BPF maps - Add bpf_rcu_read_{,un}lock() support for sleepable programs - Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs - Add support storing struct task_struct objects as kptrs in maps - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions Protocols: - TCP: implement Protective Load Balancing across switch links - TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path - UDP: Introduce optional per-netns hash lookup table - IPv6: simplify and cleanup sockets disposal - Netlink: support different type policies for each generic netlink operation - MPTCP: add MSG_FASTOPEN and FastOpen listener side support - MPTCP: add netlink notification support for listener sockets events - SCTP: add VRF support, allowing sctp sockets binding to VRF devices - Add bridging MAC Authentication Bypass (MAB) support - Extensions for Ethernet VPN bridging implementation to better support multicast scenarios - More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage - IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading - IPSec: extended ack support for more descriptive XFRM error reporting - RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking - IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks - Tun: bump the link speed from 10Mbps to 10Gbps - Tun/VirtioNet: implement UDP segmentation offload support Driver API: - PHY/SFP: improve power level switching between standard level 1 and the higher power levels - New API for netdev <-> devlink_port linkage - PTP: convert existing drivers to new frequency adjustment implementation - DSA: add support for rx offloading - Autoload DSA tagging driver when dynamically changing protocol - Add new PCP and APPTRUST attributes to Data Center Bridging - Add configuration support for 800Gbps link speed - Add devlink port function attribute to enable/disable RoCE and migratable - Extend devlink-rate to support strict prioriry and weighted fair queuing - Add devlink support to directly reading from region memory - New device tree helper to fetch MAC address from nvmem - New big TCP helper to simplify temporary header stripping New hardware / drivers: - Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches - Marvel Prestera AC5X Ethernet Switch - WangXun 10 Gigabit NIC - Motorcomm yt8521 Gigabit Ethernet - Microchip ksz9563 Gigabit Ethernet Switch - Microsoft Azure Network Adapter - Linux Automation 10Base-T1L adapter - PHY: - Aquantia AQR112 and AQR412 - Motorcomm YT8531S - PTP: - Orolia ART-CARD - WiFi: - MediaTek Wi-Fi 7 (802.11be) devices - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices - Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets - Realtek RTL8852BE and RTL8723DS - Cypress.CYW4373A0 WiFi + Bluetooth combo device Drivers: - CAN: - gs_usb: bus error reporting support - kvaser_usb: listen only and bus error reporting support - Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping - implement devlink-rate support - support direct read from memory - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate - Support for enhanced events compression - extend H/W offload packet manipulation capabilities - implement IPSec packet offload mode - nVidia/Mellanox (mlx4): - better big TCP support - Netronome Ethernet NICs (nfp): - IPsec offload support - add support for multicast filter - Broadcom: - RSS and PTP support improvements - AMD/SolarFlare: - netlink extened ack improvements - add basic flower matches to offload, and related stats - Virtual NICs: - ibmvnic: introduce affinity hint support - small / embedded: - FreeScale fec: add initial XDP support - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood - TI am65-cpsw: add suspend/resume support - Mediatek MT7986: add RX wireless wthernet dispatch support - Realtek 8169: enable GRO software interrupt coalescing per default - Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support - add ip6gre support - Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support - enable flow offload support - Renesas: - add rswitch R-Car Gen4 gPTP support - Microchip (lan966x): - add full XDP support - add TC H/W offload via VCAP - enable PTP on bridge interfaces - Microchip (ksz8): - add MTU support for KSZ8 series - Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan - MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support - add ack signal support - enable coredump support - remain_on_channel support - Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support - RealTek WiFi (rtw89): - new dynamic header firmware format support - wake-over-WLAN support" * tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits) ipvs: fix type warning in do_div() on 32 bit net: lan966x: Remove a useless test in lan966x_ptp_add_trap() net: ipa: add IPA v4.7 support dt-bindings: net: qcom,ipa: Add SM6350 compatible bnxt: Use generic HBH removal helper in tx path IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver selftests: forwarding: Add bridge MDB test selftests: forwarding: Rename bridge_mdb test bridge: mcast: Support replacement of MDB port group entries bridge: mcast: Allow user space to specify MDB entry routing protocol bridge: mcast: Allow user space to add (*, G) with a source list and filter mode bridge: mcast: Add support for (*, G) with a source list and filter mode bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source bridge: mcast: Add a flag for user installed source entries bridge: mcast: Expose __br_multicast_del_group_src() bridge: mcast: Expose br_multicast_new_group_src() bridge: mcast: Add a centralized error path bridge: mcast: Place netlink policy before validation functions bridge: mcast: Split (*, G) and (S, G) addition into different functions bridge: mcast: Do not derive entry type from its filter mode ...
2022-12-13Merge tag 'drm-next-2022-12-13' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2-0/+63
Pull drm updates from Dave Airlie: "The biggest highlight is that the accel subsystem framework is merged. Hopefully for 6.3 we will be able to line up a driver to use it. In drivers land, i915 enables DG2 support by default now, and nouveau has a big stability refactoring and initial ampere support, AMD includes new hw IP support and should build on ARM again. There is also an ofdrm driver to take over offb on platforms it's used. Stuff outside my tree, the dma-buf patches hit a few places, the vc4 firmware changes also do, and i915 has some interactions with MEI for discrete GPUs. I think all of those should have been acked/reviewed by relevant parties. New driver: - ofdrm - replacement for offb fbdev: - add support for nomodeset fourcc: - add Vivante tiled modifier core: - atomic-helpers: CRTC primary plane test fixes, fb access hooks - connector: TV API consistency, cmdline parser improvements - send connector hotplug on cleanup - sort makefile objects tests: - sort kunit tests - improve DP-MST tests - add kunit helpers to create a device sched: - module param for scheduling policy - refcounting fix buddy: - add back random seed log ttm: - convert ttm_resource to size_t - optimize pool allocations edid: - HFVSDB parsing support fixes - logging/debug improvements - DSC quirks dma-buf: - Add unlocked vmap and attachment mapping - move drivers to common locking convention - locking improvements firmware: - new API for rPI firmware and vc4 xilinx: - zynqmp: displayport bridge support - dpsub fix bridge: - adv7533: Remove dynamic lane switching - it6505: Runtime PM support, sync improvements - ps8640: Handle AUX defer messages - tc358775: Drop soft-reset over I2C panel: - panel-edp: Add INX N116BGE-EA2 C2 and C4 support. - Jadard JD9365DA-H3 - NewVision NV3051D amdgpu: - DCN support on ARM - DCN 2.1 secu