| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Requriment from customer to add new kcontrol to set tas2563 digital
Volume
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240710064238.1480-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Rename the tas2781_reset as tasdevice_reset in case of misunderstanding.
RESET register for both tas2563 and tas2781 is same and the use of reset
pin is also same.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240709043342.946-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
to support corresponding TAS2563/TAS2781s
Add name_prefix as the prefix name of firmwares and
kcontrol to support corresponding TAS2563/TAS2781s.
name_prefix is not mandatory.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240621132309.564-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
The avs-driver continues to be utilized on more recent Intel machines.
As TGL-based (cAVS 2.5) e.g.: RPL, inherit most of the functionality
from previous platforms:
SKL <- APL <- CNL <- ICL <- TGL
rather than putting everything into a single file, the platform-specific
bits are split into cnl/icl/tgl.c files instead. Makes the division clear
and code easier to maintain.
Layout of the patchset:
First are two changes combined together address the sound-clipping
problem, present when only one stream is running - specifically one
CAPTURE stream.
Follow up is naming-scheme adjustment for some of the existing functions
what improves code incohesiveness. As existing IPC/IRQ code operates
solely on cAVS 1.5 architecture, it needs no abstraction. The situation
changes when newer platforms come into the picture. Thus the next two
patches abstract the existing IPC/IRQ handlers so that majority of the
common code can be re-used.
The ICCMAX change stands out a bit - the AudioDSP firmware loading
procedure differs on ICL-based platforms (and onwards) and having a
separate commit makes the situation clear to the developers who are
going to support the solution from LTS perspective. For that reason
I decided not to merge it into the commit introducing the icl.c file.
|
|
The acpi_subysystem_id is only written and freed, not read, so
unnecessary.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/454639336be28d2b50343e9c8366a56b0975e31d.1707456753.git.soyer@irl.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The tascodec_init() of the snd-soc-tas2781-comlib module is called from
snd-soc-tas2781-i2c and snd-hda-scodec-tas2781-i2c modules. It calls
request_firmware_nowait() with parameter THIS_MODULE and a cont/callback
from the latter modules.
The latter modules can be removed while their callbacks are running,
resulting in a general protection failure.
Add module parameter to tascodec_init() so request_firmware_nowait() can
be called with the module of the callback.
Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/118dad922cef50525e5aab09badef2fa0eb796e5.1707076603.git.soyer@irl.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.8
A bunch of small fixes that come in during the merge window, mainly
fixing issues from some core refactoring around dummy components that
weren't detected until things reached mainline.
The TAS driver changes are a little larger than normal for a device ID
addition due to some shuffling around of where things are registered and
DT updates but aren't really any more substantial than normal.
|
|
Move tas2563 from tas2562 header file to tas2781 header file to unbind
tas2563 from tas2562 driver code and bind it to tas2781 driver code,
because tas2563 only work in bypass-DSP mode with tas2562 driver. In
order to enable DSP mode for tas2563, it has been moved to tas2781
driver. As to the hardware part, such as register setting and DSP
firmware, all these are stored in the binary firmware. What tas2781
drivder does is to parse the firmware and download it to the chip,
then power on the chip. So, tas2781 driver can be resued as tas2563
driver. Only attention will be paid to downloading corresponding firmware.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://msgid.link/r/20240104145721.1398-3-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The INT8866 belongs to the Lenovo Yoga 7 Gen 7 AMD 14ARB7
laptop. It has two TAS2563 amplifier. Add the PNP ID
and calibration functions to handle them.
ACPI excerpt:
Scope (_SB.I2CD)
{
Device (TAS)
{
Name (_HID, "INT8866") // _HID: Hardware ID
Name (_UID, Zero) // _UID: Unique ID
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (RBUF, ResourceTemplate ()
{
I2cSerialBusV2 (0x004C, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.I2CD",
0x00, ResourceConsumer, , Exclusive,
)
I2cSerialBusV2 (0x004D, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.I2CD",
0x00, ResourceConsumer, , Exclusive,
)
GpioInt (Edge, ActiveLow, SharedAndWake, PullNone, 0x0000,
"\\_SB.GPIO", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0020
}
})
Return (RBUF) /* \_SB_.I2CD.TAS_._CRS.RBUF */
}
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
}
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/3b8d4c602e1a46922f53bc9afc8b705d55aa4872.1703891777.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Make the global i2c address configurable to support compatible amplifiers
with different global i2c address.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/a252f1efeed5049f027f01e699c9e10e1e05bf9e.1703891777.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Make calibration functions configurable to support different calibration
data storage modes.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/5859c77ffef752b8a9784713b412d815d7e2688c.1703891777.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Create Header file for tas2781 driver.
Signed-off-by: Shenghao Ding <13916275206@139.com>
Link: https://lore.kernel.org/r/20230618122819.23143-1-13916275206@139.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
