| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit a0b4c7a49137ed21279f354eb59f49ddae8dffc2 ]
Fix netfslib such that when it's making an unbuffered or DIO write, to make
sure that it sends each subrequest strictly sequentially, waiting till the
previous one is 'committed' before sending the next so that we don't have
pieces landing out of order and potentially leaving a hole if an error
occurs (ENOSPC for example).
This is done by copying in just those bits of issuing, collecting and
retrying subrequests that are necessary to do one subrequest at a time.
Retrying, in particular, is simpler because if the current subrequest needs
retrying, the source iterator can just be copied again and the subrequest
prepped and issued again without needing to be concerned about whether it
needs merging with the previous or next in the sequence.
Note that the issuing loop waits for a subrequest to complete right after
issuing it, but this wait could be moved elsewhere allowing preparatory
steps to be performed whilst the subrequest is in progress. In particular,
once content encryption is available in netfslib, that could be done whilst
waiting, as could cleanup of buffers that have been completed.
Fixes: 153a9961b551 ("netfs: Implement unbuffered/DIO write support")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/58526.1772112753@warthog.procyon.org.uk
Tested-by: Steve French <sfrench@samba.org>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit daafcc0ef0b358d9d622b6e3b7c43767aa3814ee ]
The dma_map_sg tracepoint can trigger a perf buffer overflow when
tracing large scatter-gather lists. With devices like virtio-gpu
creating large DRM buffers, nents can exceed 1000 entries, resulting
in:
phys_addrs: 1000 * 8 bytes = 8,000 bytes
dma_addrs: 1000 * 8 bytes = 8,000 bytes
lengths: 1000 * 4 bytes = 4,000 bytes
Total: ~20,000 bytes
This exceeds PERF_MAX_TRACE_SIZE (8192 bytes), causing:
WARNING: CPU: 0 PID: 5497 at kernel/trace/trace_event_perf.c:405
perf buffer not large enough, wanted 24620, have 8192
Cap all three dynamic arrays at 128 entries using min() in the array
size calculation. This ensures arrays are only as large as needed
(up to the cap), avoiding unnecessary memory allocation for small
operations while preventing overflow for large ones.
The tracepoint now records the full nents/ents counts and a truncated
flag so users can see when data has been capped.
Changes in v2:
- Use min(nents, DMA_TRACE_MAX_ENTRIES) for dynamic array sizing
instead of fixed DMA_TRACE_MAX_ENTRIES allocation (feedback from
Steven Rostedt)
- This allocates only what's needed up to the cap, avoiding waste
for small operations
Reported-by: syzbot+28cea38c382fd15e751a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=28cea38c382fd15e751a
Tested-by: syzbot+28cea38c382fd15e751a@syzkaller.appspotmail.com
Signed-off-by: Deepanshu Kartikey <Kartikey406@gmail.com>
Reviwed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260130155215.69737-1-kartikey406@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 2c28769a51deb6022d7fbd499987e237a01dd63a upstream.
If rxrpc_recvmsg() fails because MSG_DONTWAIT was specified but the call at
the front of the recvmsg queue already has its mutex locked, it requeues
the call - whether or not the call is already queued. The call may be on
the queue because MSG_PEEK was also passed and so the call was not dequeued
or because the I/O thread requeued it.
The unconditional requeue may then corrupt the recvmsg queue, leading to
things like UAFs or refcount underruns.
Fix this by only requeuing the call if it isn't already on the queue - and
moving it to the front if it is already queued. If we don't queue it, we
have to put the ref we obtained by dequeuing it.
Also, MSG_PEEK doesn't dequeue the call so shouldn't call
rxrpc_notify_socket() for the call if we didn't use up all the data on the
queue, so fix that also.
Fixes: 540b1c48c37a ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg")
Reported-by: Faith <faith@zellic.io>
Reported-by: Pumpkin Chang <pumpkin@devco.re>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Marc Dionne <marc.dionne@auristor.com>
cc: Nir Ohfeld <niro@wiz.io>
cc: Willy Tarreau <w@1wt.eu>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/95163.1768428203@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f157dd661339fc6f5f2b574fe2429c43bd309534 ]
When evicting an inode the first thing we do is to setup tracing for it,
which implies fetching the root's id. But in btrfs_evict_inode() the
root might be NULL, as implied in the next check that we do in
btrfs_evict_inode().
Hence, we either should set the ->root_objectid to 0 in case the root is
NULL, or we move tracing setup after checking that the root is not
NULL. Setting the rootid to 0 at least gives us the possibility to trace
this call even in the case when the root is NULL, so that's the solution
taken here.
Fixes: 1abe9b8a138c ("Btrfs: add initial tracepoint support for btrfs")
Reported-by: syzbot+d991fea1b4b23b1f6bf8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d991fea1b4b23b1f6bf8
Signed-off-by: Miquel Sabaté Solà <mssola@mssola.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit c6c209ceb87f64a6ceebe61761951dcbbf4a0baa upstream.
I haven't found an NFSERR_EAGAIN in RFCs 1094, 1813, 7530, or 8881.
None of these RFCs have an NFS status code that match the numeric
value "11".
Based on the meaning of the EAGAIN errno, I presume the use of this
status in NFSD means NFS4ERR_DELAY. So replace the one usage of
nfserr_eagain, and remove it from NFSD's NFS status conversion
tables.
As far as I can tell, NFSERR_EAGAIN has existed since the pre-git
era, but was not actually used by any code until commit f4e44b393389
("NFSD: delay unmount source's export after inter-server copy
completed."), at which time it become possible for NFSD to return
a status code of 11 (which is not valid NFS protocol).
Fixes: f4e44b393389 ("NFSD: delay unmount source's export after inter-server copy completed.")
Cc: stable@vger.kernel.org
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8b62e64e6d30fa047b3aefb1a36e1f80c8acb3d2 ]
When the TLB_REMOTE_WRONG_CPU enum was introduced for the tlb_flush
tracepoint, the enum was not exported to user-space. Add it to the
appropriate macro definition to enable parsing by userspace tools, as
per:
Link: https://lore.kernel.org/all/20150403013802.220157513@goodmis.org
[ mingo: Capitalize IPI, etc. ]
Fixes: 2815a56e4b72 ("x86/mm/tlb: Add tracepoint for TLB flush IPI to stale CPU")
Signed-off-by: Tal Zussman <tz2294@columbia.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Rik van Riel <riel@surriel.com>
Link: https://patch.msgid.link/20251212-tlb-trace-fix-v2-1-d322e0ad9b69@columbia.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
While chasing yet another receive autotuning bug,
I found useful to add rcv_ssthresh, window_clamp and rcv_wnd.
tcp_stream 40597 [068] 2172.978198: tcp:tcp_rcvbuf_grow: time=50307 rtt_us=50179 copied=77824 inq=0 space=40960 ooo=0 scaling_ratio=219 rcvbuf=131072 rcv_ssthresh=107474 window_clamp=112128 rcv_wnd=110592
tcp_stream 40597 [068] 2173.028528: tcp:tcp_rcvbuf_grow: time=50336 rtt_us=50206 copied=110592 inq=0 space=77824 ooo=0 scaling_ratio=219 rcvbuf=509444 rcv_ssthresh=328658 window_clamp=435813 rcv_wnd=331776
tcp_stream 40597 [068] 2173.078830: tcp:tcp_rcvbuf_grow: time=50305 rtt_us=50070 copied=270336 inq=0 space=110592 ooo=0 scaling_ratio=219 rcvbuf=509444 rcv_ssthresh=431159 window_clamp=435813 rcv_wnd=434176
tcp_stream 40597 [068] 2173.129137: tcp:tcp_rcvbuf_grow: time=50313 rtt_us=50118 copied=434176 inq=0 space=270336 ooo=0 scaling_ratio=219 rcvbuf=2457847 rcv_ssthresh=1299511 window_clamp=2102611 rcv_wnd=1302528
tcp_stream 40597 [068] 2173.179451: tcp:tcp_rcvbuf_grow: time=50318 rtt_us=50041 copied=1019904 inq=0 space=434176 ooo=0 scaling_ratio=219 rcvbuf=2457847 rcv_ssthresh=2087445 window_clamp=2102611 rcv_wnd=2088960
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20251028-net-tcp-recv-autotune-v3-2-74b43ba4c84c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
"Two small fixes for the recently performed code refactoring (Shigeru
Yoshida) and missing handling of direction parameter in DMA debug code
(Petr Tesarik)"
* tag 'dma-mapping-6.18-2025-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-mapping: fix direction in dma_alloc direction traces
kmsan: fix kmsan_handle_dma() to avoid false positives
|
|
Pull kvm updates from Paolo Bonzini:
"This excludes the bulk of the x86 changes, which I will send
separately. They have two not complex but relatively unusual conflicts
so I will wait for other dust to settle.
guest_memfd:
- Add support for host userspace mapping of guest_memfd-backed memory
for VM types that do NOT use support KVM_MEMORY_ATTRIBUTE_PRIVATE
(which isn't precisely the same thing as CoCo VMs, since x86's
SEV-MEM and SEV-ES have no way to detect private vs. shared).
This lays the groundwork for removal of guest memory from the
kernel direct map, as well as for limited mmap() for
guest_memfd-backed memory.
For more information see:
- commit a6ad54137af9 ("Merge branch 'guest-memfd-mmap' into HEAD")
- guest_memfd in Firecracker:
https://github.com/firecracker-microvm/firecracker/tree/feature/secret-hiding
- direct map removal:
https://lore.kernel.org/all/20250221160728.1584559-1-roypat@amazon.co.uk/
- mmap support:
https://lore.kernel.org/all/20250328153133.3504118-1-tabba@google.com/
ARM:
- Add support for FF-A 1.2 as the secure memory conduit for pKVM,
allowing more registers to be used as part of the message payload.
- Change the way pKVM allocates its VM handles, making sure that the
privileged hypervisor is never tricked into using uninitialised
data.
- Speed up MMIO range registration by avoiding unnecessary RCU
synchronisation, which results in VMs starting much quicker.
- Add the dump of the instruction stream when panic-ing in the EL2
payload, just like the rest of the kernel has always done. This
will hopefully help debugging non-VHE setups.
- Add 52bit PA support to the stage-1 page-table walker, and make use
of it to populate the fault level reported to the guest on failing
to translate a stage-1 walk.
- Add NV support to the GICv3-on-GICv5 emulation code, ensuring
feature parity for guests, irrespective of the host platform.
- Fix some really ugly architecture problems when dealing with debug
in a nested VM. This has some bad performance impacts, but is at
least correct.
- Add enough infrastructure to be able to disable EL2 features and
give effective values to the EL2 control registers. This then
allows a bunch of features to be turned off, which helps cross-host
migration.
- Large rework of the selftest infrastructure to allow most tests to
transparently run at EL2. This is the first step towards enabling
NV testing.
- Various fixes and improvements all over the map, including one BE
fix, just in time for the removal of the feature.
LoongArch:
- Detect page table walk feature on new hardware
- Add sign extension with kernel MMIO/IOCSR emulation
- Improve in-kernel IPI emulation
- Improve in-kernel PCH-PIC emulation
- Move kvm_iocsr tracepoint out of generic code
RISC-V:
- Added SBI FWFT extension for Guest/VM with misaligned delegation
and pointer masking PMLEN features
- Added ONE_REG interface for SBI FWFT extension
- Added Zicbop and bfloat16 extensions for Guest/VM
- Enabled more common KVM selftests for RISC-V
- Added SBI v3.0 PMU enhancements in KVM and perf driver
s390:
- Improve interrupt cpu for wakeup, in particular the heuristic to
decide which vCPU to deliver a floating interrupt to.
- Clear the PTE when discarding a swapped page because of CMMA; this
bug was introduced in 6.16 when refactoring gmap code.
x86 selftests:
- Add #DE coverage in the fastops test (the only exception that's
guest- triggerable in fastop-emulated instructions).
- Fix PMU selftests errors encountered on Granite Rapids (GNR),
Sierra Forest (SRF) and Clearwater Forest (CWF).
- Minor cleanups and improvements
x86 (guest side):
- For the legacy PCI hole (memory between TOLUD and 4GiB) to UC when
overriding guest MTRR for TDX/SNP to fix an issue where ACPI
auto-mapping could map devices as WB and prevent the device drivers
from mapping their devices with UC/UC-.
- Make kvm_async_pf_task_wake() a local static helper and remove its
export.
- Use native qspinlocks when running in a VM with dedicated
vCPU=>pCPU bindings even when PV_UNHALT is unsupported.
Generic:
- Remove a redundant __GFP_NOWARN from kvm_setup_async_pf() as
__GFP_NOWARN is now included in GFP_NOWAIT.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (178 commits)
KVM: s390: Fix to clear PTE when discarding a swapped page
KVM: arm64: selftests: Cover ID_AA64ISAR3_EL1 in set_id_regs
KVM: arm64: selftests: Remove a duplicate register listing in set_id_regs
KVM: arm64: selftests: Cope with arch silliness in EL2 selftest
KVM: arm64: selftests: Add basic test for running in VHE EL2
KVM: arm64: selftests: Enable EL2 by default
KVM: arm64: selftests: Initialize HCR_EL2
KVM: arm64: selftests: Use the vCPU attr for setting nr of PMU counters
KVM: arm64: selftests: Use hyp timer IRQs when test runs at EL2
KVM: arm64: selftests: Select SMCCC conduit based on current EL
KVM: arm64: selftests: Provide helper for getting default vCPU target
KVM: arm64: selftests: Alias EL1 registers to EL2 counterparts
KVM: arm64: selftests: Create a VGICv3 for 'default' VMs
KVM: arm64: selftests: Add unsanitised helpers for VGICv3 creation
KVM: arm64: selftests: Add helper to check for VGICv3 support
KVM: arm64: selftests: Initialize VGICv3 only once
KVM: arm64: selftests: Provide kvm_arch_vm_post_create() in library code
KVM: selftests: Add ex_str() to print human friendly name of exception vectors
selftests/kvm: remove stale TODO in xapic_state_test
KVM: selftests: Handle Intel Atom errata that leads to PMU event overcount
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
- Refactoring of DMA mapping API to physical addresses as the primary
interface instead of page+offset parameters
This gets much closer to Matthew Wilcox's long term wish for
struct-pageless IO to cacheable DRAM and is supporting memdesc
project which seeks to substantially transform how struct page works.
An advantage of this approach is the possibility of introducing
DMA_ATTR_MMIO, which covers existing 'dma_map_resource' flow in the
common paths, what in turn lets to use recently introduced
dma_iova_link() API to map PCI P2P MMIO without creating struct page
Developped by Leon Romanovsky and Jason Gunthorpe
- Minor clean-up by Petr Tesarik and Qianfeng Rong
* tag 'dma-mapping-6.18-2025-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
kmsan: fix missed kmsan_handle_dma() signature conversion
mm/hmm: properly take MMIO path
mm/hmm: migrate to physical address-based DMA mapping API
dma-mapping: export new dma_*map_phys() interface
xen: swiotlb: Open code map_resource callback
dma-mapping: implement DMA_ATTR_MMIO for dma_(un)map_page_attrs()
kmsan: convert kmsan_handle_dma to use physical addresses
dma-mapping: convert dma_direct_*map_page to be phys_addr_t based
iommu/dma: implement DMA_ATTR_MMIO for iommu_dma_(un)map_phys()
iommu/dma: rename iommu_dma_*map_page to iommu_dma_*map_phys
dma-mapping: rename trace_dma_*map_page to trace_dma_*map_phys
dma-debug: refactor to use physical addresses for page mapping
iommu/dma: implement DMA_ATTR_MMIO for dma_iova_link().
dma-mapping: introduce new DMA attribute to indicate MMIO memory
swiotlb: Remove redundant __GFP_NOWARN
dma-direct: clean up the logic in __dma_direct_alloc_pages()
|
|
Pull NFS client updates from Anna Schumaker:
"New Features:
- Add a Kconfig option to redirect dfprintk() to the trace buffer
- Enable use of the RWF_DONTCACHE flag on the NFS client
- Add striped layout handling to pNFS flexfiles
- Add proper localio handling for READ and WRITE O_DIRECT
Bugfixes:
- Handle NFS4ERR_GRACE errors during delegation recall
- Fix NFSv4.1 backchannel max_resp_sz verification check
- Fix mount hang after CREATE_SESSION failure
- Fix d_parent->d_inode locking in nfs4_setup_readdir()
Other Cleanups and Improvements:
- Improvements to write handling tracepoints
- Fix a few trivial spelling mistakes
- Cleanups to the rpcbind cleanup call sites
- Convert the SUNRPC xdr_buf to use a scratch folio instead of
scratch page
- Remove unused NFS_WBACK_BUSY() macro
- Remove __GFP_NOWARN flags
- Unexport rpc_malloc() and rpc_free()"
* tag 'nfs-for-6.18-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (46 commits)
NFS: add basic STATX_DIOALIGN and STATX_DIO_READ_ALIGN support
nfs/localio: add tracepoints for misaligned DIO READ and WRITE support
nfs/localio: add proper O_DIRECT support for READ and WRITE
nfs/localio: refactor iocb initialization
nfs/localio: refactor iocb and iov_iter_bvec initialization
nfs/localio: avoid issuing misaligned IO using O_DIRECT
nfs/localio: make trace_nfs_local_open_fh more useful
NFSD: filecache: add STATX_DIOALIGN and STATX_DIO_READ_ALIGN support
sunrpc: unexport rpc_malloc() and rpc_free()
NFSv4/flexfiles: Add support for striped layouts
NFSv4/flexfiles: Update layout stats & error paths for striped layouts
NFSv4/flexfiles: Write path updates for striped layouts
NFSv4/flexfiles: Commit path updates for striped layouts
NFSv4/flexfiles: Read path updates for striped layouts
NFSv4/flexfiles: Update low level helper functions to be DS stripe aware.
NFSv4/flexfiles: Add data structure support for striped layouts
NFSv4/flexfiles: Use ds_commit_idx when marking a write commit
NFSv4/flexfiles: Remove cred local variable dependency
nfs4_setup_readdir(): insufficient locking for ->d_parent->d_inode dereferencing
NFS: Enable use of the RWF_DONTCACHE flag on the NFS client
...
|
|
Set __entry->dir to the actual "dir" parameter of all trace events
in dma_alloc_class. This struct member was left uninitialized by
mistake.
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Fixes: 3afff779a725 ("dma-mapping: trace dma_alloc/free direction")
Cc: stable@vger.kernel.org
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251001061028.412258-1-ptesarik@suse.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- Improve drop account scalability on NUMA hosts for RAW and UDP
sockets and the backlog, almost doubling the Pps capacity under DoS
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance
by an additional 50%, even more under extreme conditions
- Add support for PSP encryption of TCP connections; this mechanism
has some similarities with IPsec and TLS, but offers superior HW
offloads capabilities
- Ongoing work to support Accurate ECN for TCP. AccECN allows more
than one congestion notification signal per RTT and is a building
block for Low Latency, Low Loss, and Scalable Throughput (L4S)
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath
- Refactor skb deferral free to better scale on large multi-NUMA
hosts, this improves TCP and UDP RX performances significantly on
such HW
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds
- Improve handling of setups with a large number of nexthop, making
dump operating scaling linearly and avoiding unneeded
synchronize_rcu() on delete
- Improve bridge handling of VLAN FDB, storing a single entry per
bridge instead of one entry per port; this makes the dump order of
magnitude faster on large switches
- Restore IP ID correctly for encapsulated packets at GSO
segmentation time, allowing GRO to merge packets in more scenarios
- Improve netfilter matching performance on large sets
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting
recent TCP autotuning changes
- Allow bridges to redirect to a backup port when the bridge port is
administratively down
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups
- Add RCU safety to dst->dev, closing a lot of possible races
- A significant crypto library API for SCTP, MPTCP and IPv6 SR,
reducing code duplication
- Supports pulling data from an skb frag into the linear area of an
XDP buffer
Things we sprinkled into general kernel code:
- Generate netlink documentation from YAML using an integrated YAML
parser
Driver API:
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection
- Introduce API for fetching the DMA device for a given queue,
allowing TCP zerocopy RX on more H/W setups
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath
- Add a new dedicated ethtool callback enabling drivers to provide
the number of RX rings directly, improving efficiency and clarity
in RX ring queries and RSS configuration
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause
- Support for DPLL phase offset exponential moving average,
controlling the average smoothing factor
Device drivers:
- Add a new Huawei driver for 3rd gen NIC (hinic3)
- Add a new SpacemiT driver for K1 ethernet MAC
- Add a generic abstraction for shared memory communication
devices (dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention
issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link
aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level
checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages
to improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4):
- support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory
usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k):
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"
* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
net: stmmac: Add support for Allwinner A523 GMAC200
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Revert "Documentation: net: add flow control guide and document ethtool API"
octeontx2-pf: fix bitmap leak
octeontx2-vf: fix bitmap leak
net/mlx5e: Use extack in set rxfh callback
net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
net/mlx5e: Introduce mlx5e_rss_init_params
net/mlx5e: Remove unused mdev param from RSS indir init
net/mlx5: Improve QoS error messages with actual depth values
net/mlx5e: Prevent entering switchdev mode with inconsistent netns
net/mlx5: HWS, Generalize complex matchers
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
selftests/net: add tcp_port_share to .gitignore
Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
net: add NUMA awareness to skb_attempt_defer_free()
net: use llist for sd->defer_list
net: make softnet_data.defer_count an atomic
selftests: drv-net: psp: add tests for destroying devices
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
...
|
|
Pull drm updates from Dave Airlie:
"cross-subsystem:
- i2c-hid: Make elan touch controllers power on after panel is
enabled
- dt bindings for STM32MP25 SoC
- pci vgaarb: use screen_info helpers
- rust pin-init updates
- add MEI driver for late binding firmware update/load
uapi:
- add ioctl for reassigning GEM handles
- provide boot_display attribute on boot-up devices
core:
- document DRM_MODE_PAGE_FLIP_EVENT
- add vendor specific recovery method to drm device wedged uevent
gem:
- Simplify gpuvm locking
ttm:
- add interface to populate buffers
sched:
- Fix race condition in trace code
atomic:
- Reallow no-op async page flips
display:
- dp: Fix command length
video:
- Improve pixel-format handling for struct screen_info
rust:
- drop Opaque<> from ioctl args
- Alloc:
- BorrowedPage type and AsPageIter traits
- Implement Vmalloc::to_page() and VmallocPageIter
- DMA/Scatterlist:
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and sg_table
- DRM:
- simplify use of generics
- add DriverFile type alias
- drop Object::SIZE
- Rust:
- pin-init tree merge
- Various methods for AsBytes and FromBytes traits
gpuvm:
- Support madvice in Xe driver
gpusvm:
- fix hmm_pfn_to_map_order usage in gpusvm
bridge:
- Improve and fix ref counting on bridge management
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
- Support Content Protection property
- display-connector: Improve DP display detection
- Add support for Radxa Ra620 plus DT bindings
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu:
- add CRIU support for gem objects
- RAS updates
- VCN SRAM load fixes
- EDID read fixes
- eDP ALPM support
- Documentation updates
- Rework PTE flag generation
- DCE6 fixes
- VCN devcoredump cleanup
- MMHUB client id fixes
- VCN 5.0.1 RAS support
- SMU 13.0.x updates
- Expanded PCIe DPC support
- Expanded VCN reset support
- VPE per queue reset support
- give kernel jobs unique id for tracing
- pre-populate exported buffers
- cyan skillfish updates
- make vbios build number available in sysfs
- userq updates
- HDCP updates
- support MMIO remap page as ttm pool
- JPEG parser updates
- DCE6 DC updates
- use devm for i2c buses
- GPUVM locking updates
- Drop non-DC DCE11 code
- improve fallback handling for pixel encoding
amdkfd:
- SVM/page migration fixes
- debugfs fixes
- add CRIO support for gem objects
- SVM updates
radeon:
- use dev_warn_once in CS parsers
xe:
- add madvise interface
- add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
and memory attributes
- drop L# bank mask reporting from media GT3 on Xe3+.
- add SLPC power_profile sysfs interface
- add configs attribs to add post/mid context-switch commands
- handle firmware reported hardware errors notifying userspace with
device wedged uevent
- use same dir structure across sysfs/debugfs
- cleanup and future proof vram region init
- add G-states and PCI link states to debugfs
- Add SRIOV support for CCS surfaces on Xe2+
- Enable SRIOV PF mode by default on supported platforms
- move flush to common code
- extended core workarounds for Xe2/3
- use DRM scheduler for delayed GT TLB invalidations
- configs improvements and allow VF device enablement
- prep work to expose mmio regions to userspace
- VF migration support added
- prepare GPU SVM for THP migration
- start fixing XE_PAGE_SIZE vs PAGE_SIZE
- add PSMI support for hw validation
- resize VF bars to max possible size according to number of VFs
- Ensure GT is in C0 during resume
- pre-populate exported buffers
- replace xe_hmm with gpusvm
- add more SVM GT stats to debugfs
- improve fake pci and WA kunnit handle for new platform testing
- Test GuC to GuC comms to add debugging
- use attribute groups to simplify sysfs registration
- add Late Binding firmware code to interact with MEI
i915:
- apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
- protect against overflow in active_engine()
- Use try_cmpxchg64() in __active_lookup()
- include GuC registers in error state
- get rid of dev->struct_mutex
- iopoll: generalize read_poll_timout
- lots more display refactoring
- Reject HBR3 in any eDP Panel
- Prune modes for YUV420
- Display Wa fix, additions, and updates
- DP: Fix 2.7 Gbps link training on g4x
- DP: Adjust the idle pattern handling
- DP: Shuffle the link training code a bit
- Don't set/read the DSI C clock divider on GLK
- Enable_psr kernel parameter changes
- Type-C enabled/disconnected dp-alt sink
- Wildcat Lake enabling
- DP HDR updates
- DRAM detection
- wait PSR idle on dsb commit
- Remove FBC modulo 4 restriction for ADL-P+
- panic: refactor framebuffer allocation
habanalabs:
- debug/visibility improvements
- vmalloc-backed coherent mmap support
- HLDIO infrastructure
nova-core:
- various register!() macro improvements
- minor vbios/firmware fixes/refactoring
- advance firmware boot stages; process Booter and patch signatures
- process GSP and GSP bootloader
- Add r570.144 firmware bindings and update to it
- Move GSP boot code to own module
- Use new pin-init features to store driver's private data in a
single allocation
- Update ARef import from sync::aref
nova-drm:
- Update ARef import from sync::aref
tyr:
- initial driver skeleton for a rust driver for ARM Mali GPUs
- capable of powering up, query metadata and provide it to userspace.
msm:
- GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a623/a663 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
- Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
amdxdna:
- add IOCTL_AMDXDNA_GET_ARRAY
- support user space allocated buffers
- streamline PM interfaces
- Refactoring wrt. hardware contexts
- improve error reporting
nouveau:
- use GSP firmware by default
- improve error reporting
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
exynos:
- add DSIM bridge driver support for Exynos7870
- Document Exynos7870 DSIM compatible in dt-binding
panthor:
- Print task/pid on errors
- Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
- Improve cache flushing
- Fail VM bind if BO has offset
renesas:
- convert to RUNTIME_PM_OPS
rcar-du:
- Make number of lanes configurable
- Use RUNTIME_PM_OPS
- Add support for DSI commands
rocket:
- Add driver for Rockchip NPU plus DT bindings
- Use kfree() and sizeof() correctly
- Test DMA status
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
- Add support for RK3588 DPTX output
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
stm:
- Clean up logging
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss:
- Convert to kernel's FIELD_ macros
vesadrm:
- Support 8-bit palette mode
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
v3d:
- Improve job management and locking
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components"
* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
drm/amdgpu: update MODULE_PARM_DESC for freesync_video
drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
drm/amd/display: Share dce100_validate_global with DCE6-8
drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
drm/amdgpu: Fix fence signaling race condition in userqueue
amd/amdkfd: enhance kfd process check in switch partition
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
drm/amd/display: Reject modes with too high pixel clock on DCE6-10
drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
drm/amd/display: Only enable common modes for eDP and LVDS
drm/amdgpu: remove the redeclaration of variable i
drm/amdgpu/userq: assign an error code for invalid userq va
drm/amdgpu: revert "rework reserved VMID handling" v2
drm/amdgpu: remove leftover from enforcing isolation by VMID
drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
accel/habanalabs: add Infineon version check
accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
accel/habanalabs: add HL_GET_P_STATE passthrough type
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring updates from Jens Axboe:
- Store ring provided buffers locally for the users, rather than stuff
them into struct io_kiocb.
These types of buffers must always be fully consumed or recycled in
the current context, and leaving them in struct io_kiocb is hence not
a good ideas as that struct has a vastly different life time.
Basically just an architecture cleanup that can help prevent issues
with ring provided buffers in the future.
- Support for mixed CQE sizes in the same ring.
Before this change, a CQ ring either used the default 16b CQEs, or it
was setup with 32b CQE using IORING_SETUP_CQE32. For use cases where
a few 32b CQEs were needed, this caused everything else to use big
CQEs. This is wasteful both in terms of memory usage, but also memory
bandwidth for the posted CQEs.
With IORING_SETUP_CQE_MIXED, applications may use request types that
post both normal 16b and big 32b CQEs on the same ring.
- Add helpers for async data management, to make it harder for opcode
handlers to mess it up.
- Add support for multishot for uring_cmd, which ublk can use. This
helps improve efficiency, by providing a persistent request type that
can trigger multiple CQEs.
- Add initial support for ring feature querying.
We had basic support for probe operations, but the API isn't great.
Rather than expand that, add support for QUERY which is easily
expandable and can cover a lot more cases than the existing probe
support. This will help applications get a better idea of what
operations are supported on a given host.
- zcrx improvements from Pavel:
- Improve refill entry alignment for better caching
- Various cleanups, especially around deduplicating normal
memory vs dmabuf setup.
- Generalisation of the niov size (Patch 12). It's still hard
coded to PAGE_SIZE on init, but will let the user to specify
the rx buffer length on setup.
- Syscall / synchronous bufer return. It'll be used as a slow
fallback path for returning buffers when the refill queue is
full. Useful for tolerating slight queue size misconfiguration
or with inconsistent load.
- Accounting more memory to cgroups.
- Additional independent cleanups that will also be useful for
mutli-area support.
- Various fixes and cleanups
* tag 'for-6.18/io_uring-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (68 commits)
io_uring/cmd: drop unused res2 param from io_uring_cmd_done()
io_uring: fix nvme's 32b cqes on mixed cq
io_uring/query: cap number of queries
io_uring/query: prevent infinite loops
io_uring/zcrx: account niov arrays to cgroup
io_uring/zcrx: allow synchronous buffer return
io_uring/zcrx: introduce io_parse_rqe()
io_uring/zcrx: don't adjust free cache space
io_uring/zcrx: use guards for the refill lock
io_uring/zcrx: reduce netmem scope in refill
io_uring/zcrx: protect netdev with pp_lock
io_uring/zcrx: rename dma lock
io_uring/zcrx: make niov size variable
io_uring/zcrx: set sgt for umem area
io_uring/zcrx: remove dmabuf_offset
io_uring/zcrx: deduplicate area mapping
io_uring/zcrx: pass ifq to io_zcrx_alloc_fallback()
io_uring/zcrx: check all niovs filled with dma addresses
io_uring/zcrx: move area reg checks into io_import_area
io_uring/zcrx: don't pass slot to io_zcrx_create_area
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Kontron SMARC-sAM67
- GPD device sensors
- MP29502
- MP2869, MP29608, MP29612 and MP29816 series
Added chip support to existing drivers:
- asus-ec-sensors:
Add B650E-I
Add PRIME Z270-A
Add Pro WS WRX90E-SAGE SE
Add ROG STRIX X670E-E GAMING WIFI
Add ROG STRIX X870-I GAMING WIFI
Add ROG STRIX X870E-E GAMING WIFI
Add ROG STRIX Z690-E GAMING WIFI
Add ROG STRIX Z790E GAMING WIFI II
Add STRIX B850-I GAMING WIFI
Add TUF GAMING X670E PLUS WIFI
Add X670E-I GAMING WIFI
Add Z790-I GAMING WIFI
- dell-smm: Add support for Dell OptiPlex 7040
- ina238: Major cleanup, and
Add support for INA700
Add support for INA780
- k10temp:
Add device ID for Strix Halo
Add support for AMD Family 1Ah-based models
- lenovo-ec-sensors: Update P8 supprt
- lm75: Add NXP P3T |
