| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 0422e7a4883f25101903f3e8105c0808aa5f4ce9 upstream.
If a RESPONSE packet gets a temporary failure during processing, it may end
up in a partially decrypted state - and then get requeued for a retry.
Fix this by just discarding the packet; we will send another CHALLENGE
packet and thereby elicit a further response. Similarly, discard an
incoming CHALLENGE packet if we get an error whilst generating a RESPONSE;
the server will send another CHALLENGE.
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Closes: https://sashiko.dev/#/patchset/20260422161438.2593376-4-dhowells@redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260423200909.3049438-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit def304aae2edf321d2671fd6ca766a93c21f877e upstream.
Fix handling of a packet with a misaligned crypto length. Also handle
non-ENOMEM errors from decryption by aborting. Further, remove the
WARN_ON_ONCE() so that it can't be remotely triggered (a trace line can
still be emitted).
Fixes: f93af41b9f5f ("rxrpc: Fix missing error checks for rxkad encryption/decryption failure")
Closes: https://sashiko.dev/#/patchset/20260408121252.2249051-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260422161438.2593376-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1f2740150f904bfa60e4bad74d65add3ccb5e7f8 upstream.
If skb_unshare() fails to unshare a packet due to allocation failure in
rxrpc_input_packet(), the skb pointer in the parent (rxrpc_io_thread())
will be NULL'd out. This will likely cause the call to
trace_rxrpc_rx_done() to oops.
Fix this by moving the unsharing down to where rxrpc_input_call_event()
calls rxrpc_input_call_packet(). There are a number of places prior to
that where we ignore DATA packets for a variety of reasons (such as the
call already being complete) for which an unshare is then avoided.
And with that, rxrpc_input_packet() doesn't need to take a pointer to the
pointer to the packet, so change that to just a pointer.
Fixes: 2d1faf7a0ca3 ("rxrpc: Simplify skbuff accounting in receive path")
Closes: https://sashiko.dev/#/patchset/20260408121252.2249051-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260422161438.2593376-4-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Peers may only send immediate acks for every 2 UDP packets received.
When sending a jumbogram, it is important to check that there is
sufficient window space to send another same sized jumbogram following
the current one, and request an ack if there isn't. Failure to do so may
cause the call to stall waiting for an ack until the resend timer fires.
Where jumbograms are in use this causes a very significant drop in
performance.
Fixes: fe24a5494390 ("rxrpc: Send jumbo DATA packets")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-10-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In rxrpc_post_response(), the code should be comparing the challenge serial
number from the cached response before deciding to switch to a newer
response, but looks at the newer packet private data instead, rendering the
comparison always false.
Fix this by switching to look at the older packet.
Fix further[1] to substitute the new packet in place of the old one if
newer and also to release whichever we don't use.
Fixes: 5800b1cf3fd8 ("rxrpc: Allow CHALLENGEs to the passed to the app for a RESPONSE")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://sashiko.dev/#/patchset/20260319150150.4189381-1-dhowells%40redhat.com [1]
Link: https://patch.msgid.link/20260408121252.2249051-7-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix rxrpc call removal from the rxnet->calls list to use list_del_rcu()
rather than list_del_init() to prevent stuffing up reading
/proc/net/rxrpc/calls from potentially getting into an infinite loop.
This, however, means that list_empty() no longer works on an entry that's
been deleted from the list, making it harder to detect prior deletion. Fix
this by:
Firstly, make rxrpc_destroy_all_calls() only dump the first ten calls that
are unexpectedly still on the list. Limiting the number of steps means
there's no need to call cond_resched() or to remove calls from the list
here, thereby eliminating the need for rxrpc_put_call() to check for that.
rxrpc_put_call() can then be fixed to unconditionally delete the call from
the list as it is the only place that the deletion occurs.
Fixes: 2baec2c3f854 ("rxrpc: Support network namespacing")
Closes: https://sashiko.dev/#/patchset/20260319150150.4189381-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-5-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix netfs_limit_iter() hitting BUG() when an ITER_KVEC iterator
reaches it via core dump writes to 9P filesystems. Add ITER_KVEC
handling following the same pattern as the existing ITER_BVEC code.
- Fix a NULL pointer dereference in the netfs unbuffered write retry
path when the filesystem (e.g., 9P) doesn't set the prepare_write
operation.
- Clear I_DIRTY_TIME in sync_lazytime for filesystems implementing
->sync_lazytime. Without this the flag stays set and may cause
additional unnecessary calls during inode deactivation.
- Increase tmpfs size in mount_setattr selftests. A recent commit
bumped the ext4 image size to 2 GB but didn't adjust the tmpfs
backing store, so mkfs.ext4 fails with ENOSPC writing metadata.
- Fix an invalid folio access in iomap when i_blkbits matches the folio
size but differs from the I/O granularity. The cur_folio pointer
would not get invalidated and iomap_read_end() would still be called
on it despite the IO helper owning it.
- Fix hash_name() docstring.
- Fix read abandonment during netfs retry where the subreq variable
used for abandonment could be uninitialized on the first pass or
point to a deleted subrequest on later passes.
- Don't block sync for filesystems with no data integrity guarantees.
Add a SB_I_NO_DATA_INTEGRITY superblock flag replacing the per-inode
AS_NO_DATA_INTEGRITY mapping flag so sync kicks off writeback but
doesn't wait for flusher threads. This fixes a suspend-to-RAM hang on
fuse-overlayfs where the flusher thread blocks when the fuse daemon
is frozen.
- Fix a lockdep splat in iomap when reads fail. iomap_read_end_io()
invokes fserror_report() which calls igrab() taking i_lock in hardirq
context while i_lock is normally held with interrupts enabled. Kick
failed read handling to a workqueue.
- Remove the redundant netfs_io_stream::front member and use
stream->subrequests.next instead, fixing a potential issue in the
direct write code path.
* tag 'vfs-7.0-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs: Fix the handling of stream->front by removing it
iomap: fix lockdep complaint when reads fail
writeback: don't block sync for filesystems with no data integrity guarantees
netfs: Fix read abandonment during retry
vfs: fix docstring of hash_name()
iomap: fix invalid folio access when i_blkbits differs from I/O granularity
selftests/mount_setattr: increase tmpfs size for idmapped mount tests
fs: clear I_DIRTY_TIME in sync_lazytime
netfs: Fix NULL pointer dereference in netfs_unbuffered_write() on retry
netfs: Fix kernel BUG in netfs_limit_iter() for ITER_KVEC iterators
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes. There's one that stands out in size as it fixes an
edge case in fsync.
- fix issue on fsync where file with zero size appears as a non-zero
after log replay
- in zlib compression, handle a crash when data alignment causes
folio reference issues
- fix possible crash with enabled tracepoints on a overlayfs mount
- handle device stats update error
- on zoned filesystems, fix kobject leak on sub-block groups
- fix super block offset in an error message in validation"
* tag 'for-7.0-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix lost error when running device stats on multiple devices fs
btrfs: tracepoints: get correct superblock from dentry in event btrfs_sync_file()
btrfs: zlib: handle page aligned compressed size correctly
btrfs: fix leak of kobject name for sub-group space_info
btrfs: fix zero size inode with non-zero size after log replay
btrfs: fix super block offset in error message in btrfs_validate_super()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
"A set of fixes for DMA-mapping subsystem, which resolve false-
positive warnings from KMSAN and DMA-API debug (Shigeru Yoshida
and Leon Romanovsky) as well as a simple build fix (Miguel Ojeda)"
* tag 'dma-mapping-7.0-2026-03-25' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-mapping: add missing `inline` for `dma_free_attrs`
mm/hmm: Indicate that HMM requires DMA coherency
RDMA/umem: Tell DMA mapping that UMEM requires coherency
iommu/dma: add support for DMA_ATTR_REQUIRE_COHERENT attribute
dma-direct: prevent SWIOTLB path when DMA_ATTR_REQUIRE_COHERENT is set
dma-mapping: Introduce DMA require coherency attribute
dma-mapping: Clarify valid conditions for CPU cache line overlap
dma-mapping: handle DMA_ATTR_CPU_CACHE_CLEAN in trace output
dma-debug: Allow multiple invocations of overlapping entries
dma: swiotlb: add KMSAN annotations to swiotlb_bounce()
|
|
The netfs_io_stream::front member is meant to point to the subrequest
currently being collected on a stream, but it isn't actually used this way
by direct write (which mostly ignores it). However, there's a tracepoint
which looks at it. Further, stream->front is actually redundant with
stream->subrequests.next.
Fix the potential problem in the direct code by just removing the member
and using stream->subrequests.next instead, thereby also simplifying the
code.
Fixes: a0b4c7a49137 ("netfs: Fix unbuffered/DIO writes to dispatch subrequests in strict sequence")
Reported-by: Paulo Alcantara <pc@manguebit.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/4158599.1774426817@warthog.procyon.org.uk
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
btrfs_sync_file()
If overlay is used on top of btrfs, dentry->d_sb translates to overlay's
super block and fsid assignment will lead to a crash.
Use file_inode(file)->i_sb to always get btrfs_sb.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This reverts commit e3f6a42272e028c46695acc83fc7d7c42f2750ad.
The commit says that the tracepoint only deals with the current task,
however the following case is not current task:
comm_write() {
p = get_proc_task(inode);
if (!p)
return -ESRCH;
if (same_thread_group(current, p))
set_task_comm(p, buffer);
}
where set_task_comm() calls __set_task_comm() which records
the update of p and not current.
So revert the patch to show pid.
Cc: <mhiramat@kernel.org>
Cc: <mathieu.desnoyers@efficios.com>
Cc: <elver@google.com>
Cc: <kees@kernel.org>
Link: https://patch.msgid.link/20260306075954.4533-1-xuewen.yan@unisoc.com
Fixes: e3f6a42272e0 ("tracing: Remove pid in task_rename tracing output")
Reported-by: Guohua Yan <guohua.yan@unisoc.com>
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The mapping buffers which carry this attribute require DMA coherent system.
This means that they can't take SWIOTLB path, can perform CPU cache overlap
and doesn't perform cache flushing.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260316-dma-debug-overlap-v3-4-1dde90a7f08b@nvidia.com
|
|
Rename the DMA_ATTR_CPU_CACHE_CLEAN attribute to better reflect that it
is debugging aid to inform DMA core code that CPU cache line overlaps are
allowed, and refine the documentation describing its use.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260316-dma-debug-overlap-v3-3-1dde90a7f08b@nvidia.com
|
|
Tracing prints decoded DMA attribute flags, but it does not yet
include the recently added DMA_ATTR_CPU_CACHE_CLEAN. Add support
for decoding and displaying this attribute in the trace output.
Fixes: 61868dc55a11 ("dma-mapping: add DMA_ATTR_CPU_CACHE_CLEAN")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260316-dma-debug-overlap-v3-2-1dde90a7f08b@nvidia.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- kthread: consolidate kthread exit paths to prevent use-after-free
- iomap:
- don't mark folio uptodate if read IO has bytes pending
- don't report direct-io retries to fserror
- reject delalloc mappings during writeback
- ns: tighten visibility checks
- netfs: Fix unbuffered/DIO writes to dispatch subrequests in strict
sequence
* tag 'vfs-7.0-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: reject delalloc mappings during writeback
iomap: don't mark folio uptodate if read IO has bytes pending
selftests: fix mntns iteration selftests
nstree: tighten permission checks for listing
nsfs: tighten permission checks for handle opening
nsfs: tighten permission checks for ns iteration ioctls
netfs: Fix unbuffered/DIO writes to dispatch subrequests in strict sequence
kthread: consolidate kthread exit paths to prevent use-after-free
iomap: don't report direct-io retries to fserror
|
|
Fix netfslib such that when it's making an unbuffered or DIO write, to make
sure that it sends each subrequest strictly sequentially, waiting till the
previous one is 'committed' before sending the next so that we don't have
pieces landing out of order and potentially leaving a hole if an error
occurs (ENOSPC for example).
This is done by copying in just those bits of issuing, collecting and
retrying subrequests that are necessary to do one subrequest at a time.
Retrying, in particular, is simpler because if the current subrequest needs
retrying, the source iterator can just be copied again and the subrequest
prepped and issued again without needing to be concerned about whether it
needs merging with the previous or next in the sequence.
Note that the issuing loop waits for a subrequest to complete right after
issuing it, but this wait could be moved elsewhere allowing preparatory
steps to be performed whilst the subrequest is in progress. In particular,
once content encryption is available in netfslib, that could be done whilst
waiting, as could cleanup of buffers that have been completed.
Fixes: 153a9961b551 ("netfs: Implement unbuffered/DIO write support")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/58526.1772112753@warthog.procyon.org.uk
Tested-by: Steve French <sfrench@samba.org>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The rss_stat trace event allows userspace tools, like Perfetto [1], to
inspect per-process RSS metric changes over time.
The curr field was introduced to rss_stat in commit e4dcad204d3a
("rss_stat: add support to detect RSS updates of external mm"). Its
intent is to indicate whether the RSS update is for the mm_struct of the
current execution context; and is set to false when operating on a remote
mm_struct (e.g., via kswapd or a direct reclaimer).
However, an issue arises when a kernel thread temporarily adopts a user
process's mm_struct. Kernel threads do not have their own mm_struct and
normally have current->mm set to NULL. To operate on user memory, they
can "borrow" a memory context using kthread_use_mm(), which sets
current->mm to the user process's mm.
This can be observed, for example, in the USB Function Filesystem (FFS)
driver. The ffs_user_copy_worker() handles AIO completions and uses
kthread_use_mm() to copy data to a user-space buffer. If a page fault
occurs during this copy, the fault handler executes in the kthread's
context.
At this point, current is the kthread, but current->mm points to the user
process's mm. Since the rss_stat event (from the page fault) is for that
same mm, the condition current->mm == mm becomes true, causing curr to be
incorrectly set to true when the trace event is emitted.
This is misleading because it suggests the mm belongs to the kthread,
confusing userspace tools that track per-process RSS changes and
corrupting their mm_id-to-process association.
Fix this by ensuring curr is always false when the trace event is emitted
from a kthread context by checking for the PF_KTHREAD flag.
Link: https://lkml.kernel.org/r/20260219233708.1971199-1-kaleshsingh@google.com
Link: https://perfetto.dev/ [1]
Fixes: e4dcad204d3a ("rss_stat: add support to detect RSS updates of external mm")
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: "David Hildenbrand (Arm)" <david@kernel.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org> [5.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull more misc vfs updates from Christian Brauner:
"Features:
- Optimize close_range() from O(range size) to O(active FDs) by using
find_next_bit() on the open_fds bitmap instead of linearly scanning
the entire requested range. This is a significant improvement for
large-range close operations on sparse file descriptor tables.
- Add FS_XFLAG_VERITY file attribute for fs-verity files, retrievable
via FS_IOC_FSGETXATTR and file_getattr(). The flag is read-only.
Add tracepoints for fs-verity enable and verify operations,
replacing the previously removed debug printk's.
- Prevent nfsd from exporting special kernel filesystems like pidfs
and nsfs. These filesystems have custom ->open() and ->permission()
export methods that are designed for open_by_handle_at(2) only and
are incompatible with nfsd. Update the exportfs documentation
accordingly.
Fixes:
- Fix KMSAN uninit-value in ovl_fill_real() where strcmp() was used
on a non-null-terminated decrypted directory entry name from
fscrypt. This triggered on encrypted lower layers when the
decrypted name buffer contained uninitialized tail data.
The fix also adds VFS-level name_is_dot(), name_is_dotdot(), and
name_is_dot_dotdot() helpers, replacing various open-coded "." and
".." checks across the tree.
- Fix read-only fsflags not being reset together with xflags in
vfs_fileattr_set(). Currently harmless since no read-only xflags
overlap with flags, but this would cause inconsistencies for any
future shared read-only flag
- Return -EREMOTE instead of -ESRCH from PIDFD_GET_INFO when the
target process is in a different pid namespace. This lets userspace
distinguish "process exited" from "process in another namespace",
matching glibc's pidfd_getpid() behavior
Cleanups:
- Use C-string literals in the Rust seq_file bindings, replacing the
kernel::c_str!() macro (available since Rust 1.77)
- Fix typo in d_walk_ret enum comment, add porting notes for the
readlink_copy() calling convention change"
* tag 'vfs-7.0-rc1.misc.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: add porting notes about readlink_copy()
pidfs: return -EREMOTE when PIDFD_GET_INFO is called on another ns
nfsd: do not allow exporting of special kernel filesystems
exportfs: clarify the documentation of open()/permission() expotrfs ops
fsverity: add tracepoints
fs: add FS_XFLAG_VERITY for fs-verity files
rust: seq_file: replace `kernel::c_str!` with C-Strings
fs: dcache: fix typo in enum d_walk_ret comment
ovl: use name_is_dot* helpers in readdir code
fs: add helpers name_is_dot{,dot,_dotdot}
ovl: Fix uninit-value in ovl_fill_real
fs: reset read-only fsflags together with xflags
fs/file: optimize close_range() complexity from O(N) to O(Sparse)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this development cycle, we focused on several key performance
optimizations:
- introducing large folio support to enhance read speeds for
immutable files
- reducing checkpoint=enable latency by flushing only committed dirty
pages
- implementing tracepoints to diagnose and resolve lock priority
inversion.
Additionally, we introduced the packed_ssa feature to optimize the SSA
footprint when utilizing large block sizes.
Detail summary:
Enhancements:
- support large folio for immutable non-compressed case
- support non-4KB block size without packed_ssa feature
- optimize f2fs_enable_checkpoint() to avoid long delay
- optimize f2fs_overwrite_io() for f2fs_iomap_begin
- optimize NAT block loading during checkpoint write
- add write latency stats for NAT and SIT blocks in
f2fs_write_checkpoint
- pin files do not require sbi->writepages lock for ordering
- avoid f2fs_map_blocks() for consecutive holes in readpages
- flush plug periodically during GC to maximize readahead effect
- add tracepoints to catch lock overheads
- add several sysfs entries to tune internal lock priorities
Fixes:
- fix lock priority inversion issue
- fix incomplete block usage in compact SSA summaries
- fix to show simulate_lock_timeout correctly
- fix to avoid mapping wrong physical block for swapfile
- fix IS_CHECKPOINTED flag inconsistency issue caused by
concurrent atomic commit and checkpoint writes
- fix to avoid UAF in f2fs_write_end_io()"
* tag 'f2fs-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (61 commits)
f2fs: sysfs: introduce critical_task_priority
f2fs: introduce trace_f2fs_priority_update
f2fs: fix lock priority inversion issue
f2fs: optimize f2fs_overwrite_io() for f2fs_iomap_begin
f2fs: fix incomplete block usage in compact SSA summaries
f2fs: decrease maximum flush retry count in f2fs_enable_checkpoint()
f2fs: optimize NAT block loading during checkpoint write
f2fs: change size parameter of __has_cursum_space() to unsigned int
f2fs: add write latency stats for NAT and SIT blocks in f2fs_write_checkpoint
f2fs: pin files do not require sbi->writepages lock for ordering
f2fs: fix to show simulate_lock_timeout correctly
f2fs: introduce FAULT_SKIP_WRITE
f2fs: check skipped write in f2fs_enable_checkpoint()
Revert "f2fs: add timeout in f2fs_enable_checkpoint()"
f2fs: fix to unlock folio in f2fs_read_data_large_folio()
f2fs: fix error path handling in f2fs_read_data_large_folio()
f2fs: use folio_end_read
f2fs: fix to avoid mapping wrong physical block for swapfile
f2fs: avoid f2fs_map_blocks() for consecutive holes in readpages
f2fs: advance index and offset after zeroing in large folio read
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
"User visible changes:
- Add an entry into MAINTAINERS file for RUST versions of code
There's now RUST code for tracing and static branches. To
differentiate that code from the C code, add entries in for the
RUST version (with "[RUST]" around it) so that the right
maintainers get notified on changes.
- New bitmask-list option added to tracefs
When this is set, bitmasks in trace event are not displayed as hex
numbers, but instead as lists: e.g. 0-5,7,9 instead of 0000015f
- New show_event_filters file in tracefs
Instead of having to search all events/*/*/filter for any active
filters enabled in the trace instance, the file show_event_filters
will list them so that there's only one file that needs to be
examined to see if any filters are active.
- New show_event_triggers file in tracefs
Instead of having to search all events/*/*/trigger for any active
triggers enabled in the trace instance, the file
show_event_triggers will list them so that there's only one file
that needs to be examined to see if any triggers are active.
- Have traceoff_on_warning disable trace pintk buffer too
Recently recording of trace_printk() could go to other trace
instances instead of the top level instance. But if
traceoff_on_warning triggers, it doesn't stop the buffer with
trace_printk() and that data can easily be lost by being
overwritten. Have traceoff_on_warning also disable the instance
that has trace_printk() being written to it.
- Update the hist_debug file to show what function the field uses
When CONFIG_HIST_TRIGGERS_DEBUG is enabled, a hist_debug file
exists for every event. This displays the internal data of any
histogram enabled for that event. But it is lacking the function
that is called to process one of its fields. This is very useful
information that was missing when debugging histograms.
- Up the histogram stack size from 16 to 31
Stack traces can be used as keys for event histograms. Currently
the size of the stack that is stored is limited to just 16 entries.
But the storage space in the histogram is 256 bytes, meaning that
it can store up to 31 entries (plus one for the count of entries).
Instead of letting that space go to waste, up the limit from 16 to
31. This makes the keys much more useful.
- Fix permissions of per CPU file buffer_size_kb
The per CPU file of buffer_size_kb was incorrectly set to read only
in a previous cleanup. It should be writable.
- Reset "last_boot_info" if the persistent buffer is cleared
The last_boot_info shows address information of a persistent ring
buffer if it contains data from a previous boot. It is cleared when
recording starts again, but it is not cleared when the buffer is
reset. The data is useless after a reset so clear it on reset too.
Internal changes:
- A change was made to allow tracepoint callbacks to have preemption
enabled, and instead be protected by SRCU. This required some
updates to the callbacks for perf and BPF.
perf needed to disable preemption directly in its callback because
it expects preemption disabled in the later code.
BPF needed to disable migration, as its code expects to run
completely on the same CPU.
- Have irq_work wake up other CPU if current CPU is "isolated"
When there's a waiter waiting on ring buffer data and a new event
happens, an irq work is triggered to wake up that waiter. This is
noisy on isolated CPUs (running NO_HZ_FULL). Trigger an IPI to a
house keeping CPU instead.
- Use proper free of trigger_data instead of open coding it in.
- Remove redundant call of event_trigger_reset_filter()
It was called immediately in a function that was called right after
it.
- Workqueue cleanups
- Report errors if tracing_update_buffers() were to fail.
- Make the enum update workqueue generic for other parts of tracing
On boot up, a work queue is created to convert enum names into
their numbers in the trace event format files. This work queue can
also be used for other aspects of tracing that takes some time and
shouldn't be called by the init call code.
The blk_trace initialization takes a bit of time. Have the
initialization code moved to the new tracing generic work queue
function.
- Skip kprobe boot event creation call if there's no kprobes defined
on cmdline
The kprobe initialization to set up kprobes if they are defined on
the cmdline requires taking the event_mutex lock. This can be held
by other tracing code doing initialization for a long time. Since
kprobes added to the kernel command line need to be setup
immediately, as they may be tracing early initialization code, they
cannot be postponed in a work queue and must be setup in the
initcall code.
If there's no kprobe on the kernel cmdline, there's no reason to
take the mutex and slow down the boot up code waiting to get the
lock only to find out there's nothing to do. Simply exit out early
if there's no kprobes on the kernel cmdline.
If there are kprobes on the cmdline, then someone cares more about
tracing over the speed of boot up.
- Clean up the trigger code a bit
- Move code out of trace.c and into their own files
trace.c is now over 11,000 lines of code and has become more
difficult to maintain. Start splitting it up so that related code
is in their own files.
Move all the trace_printk() related code into trace_printk.c.
Move the __always_inline stack functions into trace.h.
Move the pid filtering code into a new trace_pid.c file.
- Better define the max latency and snapshot code
The latency tracers have a "max latency" buffer that is a copy of
the main buffer and gets swapped with it when a new high latency is
detected. This keeps the trace up to the highest latency around
where this max_latency buffer is never written to. It is only used
to save the last max latency trace.
A while ago a snapshot feature was added to tracefs to allow user
space to perform the same logic. It could also enable events to
trigger a "snapshot" if one of their fields hit a new high. This
was built on top of the latency max_latency buffer logic.
Because snapshots came later, they were dependent on the latency
tracers to be enabled. In reality, the latency tracers depend on
the snapshot code and not the other way around. It was just that
they came first.
Restructure the code and the kconfigs to have the latency tracers
depend on snapshot code instead. This actually simplifies the logic
a bit and allows to disable more when the latency tracers are not
defined and the snapshot code is.
- Fix a "false sharing" in the hwlat tracer code
The loop to search for latency in hardware was using a variable
that could be changed by user space for each sample. If the user
change this variable, it could cause a bus contention, and reading
that variable can show up as a large latency in the trace causing a
false positive. Read this variable at the start of the sample with
a READ_ONCE() into a local variable and keep the code from sharing
cache lines with readers.
- Fix function graph tracer static branch optimization code
When only one tracer is defined for function graph tracing, it uses
a static branch to call that tracer directly. When another tracer
is added, it goes into loop logic to call all the registered
callbacks.
The code was incorrect when going back to one tracer and never
re-enabled the static branch again to do the optimization code.
- And other small fixes and cleanups"
* tag 'trace-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (46 commits)
function_graph: Restore direct mode when callbacks drop to one
tracing: Fix indentation of return statement in print_trace_fmt()
tracing: Reset last_boot_info if ring buffer is reset
tracing: Fix to set write permission to per-cpu buffer_size_kb
tracing: Fix false sharing in hwlat get_sample()
tracing: Move d_max_latency out of CONFIG_FSNOTIFY protection
tracing: Better separate SNAPSHOT and MAX_TRACE options
tracing: Add tracer_uses_snapshot() helper to remove #ifdefs
tracing: Rename trace_array field max_buffer to snapshot_buffer
tracing: Move pid filtering into trace_pid.c
tracing: Move trace_printk functions out of trace.c and into trace_printk.c
tracing: Use system_state in trace_printk_init_buffers()
tracing: Have trace_printk functions use flags instead of using global_trace
tracing: Make tracing_update_buffers() take NULL for global_trace
tracing: Make printk_trace global for tracing system
tracing: Move ftrace_trace_stack() out of trace.c and into trace.h
tracing: Move __trace_buffer_{un}lock_*() functions to trace.h
tracing: Make tracing_selftest_running global to the tracing subsystem
tracing: Make tracing_disabled global for tracing system
tracing: Clean up use of trace_create_maxlat_file()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "powerpc/64s: do not re-activate batched TLB flush" makes
arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev)
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- "zram: introduce compressed data writeback" implements data
compression for zram writeback (Richard Chang and Sergey Senozhatsky)
- "mm: folio_zero_user: clear page ranges" adds clearing of contiguous
page ranges for hugepages. Large improvements during demand faulting
are demonstrated (David Hildenbrand)
- "memcg cleanups" tidies up some memcg code (Chen Ridong)
- "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos
stats" improves DAMOS stat's provided information, deterministic
control, and readability (SeongJae Park)
- "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few
issues in the hugetlb cgroup charging selftests (Li Wang)
- "Fix va_high_addr_switch.sh test failure - again" addresses several
issues in the va_high_addr_switch test (Chunyu Hu)
- "mm/damon/tests/core-kunit: extend existing test scenarios" improves
the KUnit test coverage for DAMON (Shu Anzai)
- "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a
glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to
transiently return -EAGAIN (Shivank Garg)
- "arch, mm: consolidate hugetlb early reservation" reworks and
consolidates a pile of straggly code related to reservation of
hugetlb memory from bootmem and creation of CMA areas for hugetlb
(Mike Rapoport)
- "mm: clean up anon_vma implementation" cleans up the anon_vma
implementation in various ways (Lorenzo Stoakes)
- "tweaks for __alloc_pages_slowpath()" does a little streamlining of
the page allocator's slowpath code (Vlastimil Babka)
- "memcg: separate private and public ID namespaces" cleans up the
memcg ID code and prevents the internal-only private IDs from being
exposed to userspace (Shakeel Butt)
- "mm: hugetlb: allocate frozen gigantic folio" cleans up the
allocation of frozen folios and avoids some atomic refcount
operations (Kefeng Wang)
- "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement
of memory betewwn the active and inactive LRUs and adds auto-tuning
of the ratio-based quotas and of monitoring intervals (SeongJae Park)
- "Support page table check on PowerPC" makes
CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan)
- "nodemask: align nodes_and{,not} with underlying bitmap ops" makes
nodes_and() and nodes_andnot() propagate the return values from the
underlying bit operations, enabling some cleanup in calling code
(Yury Norov)
- "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up
some DAMON internal interfaces (SeongJae Park)
- "mm/khugepaged: cleanups and scan limit fix" does some cleanup work
in khupaged and fixes a scan limit accounting issue (Shivank Garg)
- "mm: balloon infrastructure cleanups" goes to town on the balloon
infrastructure and its page migration function. Mainly cleanups, also
some locking simplification (David Hildenbrand)
- "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds
additional tracepoints to the page reclaim code (Jiayuan Chen)
- "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is
part of Marco's kernel-wide migration from the legacy workqueue APIs
over to the preferred unbound workqueues (Marco Crivellari)
- "Various mm kselftests improvements/fixes" provides various unrelated
improvements/fixes for the mm kselftests (Kevin Brodsky)
- "mm: accelerate gigantic folio allocation" greatly speeds up gigantic
folio allocation, mainly by avoiding unnecessary work in
pfn_range_valid_contig() (Kefeng Wang)
- "selftests/damon: improve leak detection and wss estimation
reliability" improves the reliability of two of the DAMON selftests
(SeongJae Park)
- "mm/damon: cleanup kdamond, damon_call(), damos filter and
DAMON_MIN_REGION" does some cleanup work in the core DAMON code
(SeongJae Park)
- "Docs/mm/damon: update intro, modules, maintainer profile, and misc"
performs maintenance work on the DAMON documentation (SeongJae Park)
- "mm: add and use vma_assert_stabilised() helper" refactors and cleans
up the core VMA code. The main aim here is to be able to use the mmap
write lock's lockdep state to perform various assertions regarding
the locking which the VMA code requires (Lorenzo Stoakes)
- "mm, swap: swap table phase II: unify swapin use" removes some old
swap code (swap cache bypassing and swap synchronization) which
wasn't working very well. Various other cleanups and simplifications
were made. The end result is a 20% speedup in one benchmark (Kairui
Song)
- "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM
available on 64-bit alpha, loongarch, mips, parisc, and um. Various
cleanups were performed along the way (Qi Zheng)
* tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits)
mm/memory: handle non-split locks correctly in zap_empty_pte_table()
mm: move pte table reclaim code to memory.c
mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE
mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
um: mm: enable MMU_GATHER_RCU_TABLE_FREE
parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE
mips: mm: enable MMU_GATHER_RCU_TABLE_FREE
LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE
alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE
mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h
mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles
zsmalloc: make common caches global
mm: add SPDX id lines to some mm source files
mm/zswap: use %pe to print error pointers
mm/vmscan: use %pe to print error pointers
mm/readahead: fix typo in comment
mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file()
mm: refactor vma_map_pages to use vm_insert_pages
mm/damon: unify address range representation with damon_addr_range
mm/cma: replace snprintf with strscpy in cma_new_area
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"New features and improvements for the ext4 file system
- Avoid unnecessary cache invalidation in the extent status cache
(es_cache) when adding extents to be cached in the es_cache and we
are not changing the extent tree
- Add a sysfs parameter, err_report_sec, to control how frequently to
log a warning message that file system inconsistency has been
detected (Previously we logged the warning message every 24 hours)
- Avoid unnecessary forced ordered writes when appending to a file
when delayed allocation is enabled
- Defer splitting unwritten extents to I/O completion to improve
write performance of concurrent direct I/O writes to multiple files
- Refactor and add kunit tests to the extent splitting and conversion
code paths
Various Bug Fixes:
- Fix a panic when the debugging DOUBLE_CHECK macro is defined
- Avoid using fast commit for rare and complex file system operations
to make fast commit easier to reason about. This can also avoid
some corner cases that could result in file system inconsistency if
there is a crash between the fast commit before a subsequent full
commit
- Fix memory leaks in error paths
- Fix a false positive reports caused when running stress tests using
mixed huge-page workloads caused by a race between page migration
and bitmap updates
- Fix a potential recursion into file system reclaim when evicting an
inode when fast commit is enabled
- Fix a warning caused by a potential double decrement to the dirty
clusters counter when executing FS_IOC_SHUTDOWN when running a
stress test
- Enable mballoc optimized scanning regardless whether the inode is
using indirect blocks or extent trees to map blocks"
* tag 'ext4_for_linus-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (45 commits)
et4: allow zeroout when doing written to unwritten split
ext4: refactor split and convert extents
ext4: refactor zeroout path and handle all cases
ext4: propagate flags to ext4_convert_unwritten_extents_endio()
ext4: propagate flags to convert_initialized_extent()
ext4: add extent status cache support to kunit tests
ext4: kunit tests for higher level extent manipulation functions
ext4: kunit tests for extent splitting and conversion
ext4: use optimized mballoc scanning regardless of inode format
ext4: always allocate blocks only from groups inode can use
ext4: fix dirtyclusters double decrement on fs shutdown
ext4: fast commit: make s_fc_lock reclaim-safe
ext4: fix e4b bitmap inconsistency reports
ext4: remove redundant NULL check after __GFP_NOFAIL
ext4: remove EXT4_GET_BLOCKS_IO_CREATE_EXT
ext4: simplify the mapping query logic in ext4_iomap_begin()
ext4: remove unused unwritten parameter in ext4_dio_write_iter()
ext4: remove useless ext4_iomap_overwrite_ops
ext4: avoid starting handle when dio writing an unwritten extent
ext4: don't split extent before submitting I/O
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls
for small helper and stack canary overhead in the fast-path.
This generates better and faster code with very small or no text
size increases, as in many cases the call generated more code than
the actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage
by up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the
RX path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without
the HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified,
aligning IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the
rate shaper of sch_cake across multiple CPUs, while still enforcing
a single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations
that are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information,
saving cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most
protocols, avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies
between the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes
back online.
Driver API:
- Support for switching the working mode (automatic vs manual) of a
DPLL device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties,
to generalize polarity inversion requirements for differential
signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers:
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram
and NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the
used H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO,
leading to 12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new
layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL |
