| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- Support for preemption
- i386 Rust support
- Huge cleanup by Benjamin Berg
- UBSAN support
- Removal of dead code
* tag 'uml-for-linus-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (41 commits)
um: vector: always reset vp->opened
um: vector: remove vp->lock
um: register power-off handler
um: line: always fill *error_out in setup_one_line()
um: remove pcap driver from documentation
um: Enable preemption in UML
um: refactor TLB update handling
um: simplify and consolidate TLB updates
um: remove force_flush_all from fork_handler
um: Do not flush MM in flush_thread
um: Delay flushing syscalls until the thread is restarted
um: remove copy_context_skas0
um: remove LDT support
um: compress memory related stub syscalls while adding them
um: Rework syscall handling
um: Add generic stub_syscall6 function
um: Create signal stack memory assignment in stub_data
um: Remove stub-data.h include from common-offsets.h
um: time-travel: fix signal blocking race/hang
um: time-travel: remove time_exit()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-07-25
We've added 14 non-merge commits during the last 8 day(s) which contain
a total of 19 files changed, 177 insertions(+), 70 deletions(-).
The main changes are:
1) Fix af_unix to disable MSG_OOB handling for sockets in BPF sockmap and
BPF sockhash. Also add test coverage for this case, from Michal Luczaj.
2) Fix a segmentation issue when downgrading gso_size in the BPF helper
bpf_skb_adjust_room(), from Fred Li.
3) Fix a compiler warning in resolve_btfids due to a missing type cast,
from Liwei Song.
4) Fix stack allocation for arm64 to align the stack pointer at a 16 byte
boundary in the fexit_sleep BPF selftest, from Puranjay Mohan.
5) Fix a xsk regression to require a flag when actuating tx_metadata_len,
from Stanislav Fomichev.
6) Fix function prototype BTF dumping in libbpf for prototypes that have
no input arguments, from Andrii Nakryiko.
7) Fix stacktrace symbol resolution in perf script for BPF programs
containing subprograms, from Hou Tao.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add XDP_UMEM_TX_METADATA_LEN to XSK TX metadata test
xsk: Require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len
bpf: Fix a segment issue when downgrading gso_size
tools/resolve_btfids: Fix comparison of distinct pointer types warning in resolve_btfids
bpf, events: Use prog to emit ksymbol event for main program
selftests/bpf: Test sockmap redirect for AF_UNIX MSG_OOB
selftests/bpf: Parametrize AF_UNIX redir functions to accept send() flags
selftests/bpf: Support SOCK_STREAM in unix_inet_redir_to_connected()
af_unix: Disable MSG_OOB handling for sockets in sockmap/sockhash
bpftool: Fix typo in usage help
libbpf: Fix no-args func prototype BTF dumping syntax
MAINTAINERS: Update powerpc BPF JIT maintainers
MAINTAINERS: Update email address of Naveen
selftests/bpf: fexit_sleep: Fix stack allocation for arm64
====================
Link: https://patch.msgid.link/20240725114312.32197-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The of_property_for_each_u32() macro needs five parameters, two of which
are primarily meant as internal variables for the macro itself (in the
for() clause). Yet these two parameters are used by a few drivers, and this
can be considered misuse or at least bad practice.
Now that the kernel uses C11 to build, these two parameters can be avoided
by declaring them internally, thus changing this pattern:
struct property *prop;
const __be32 *p;
u32 val;
of_property_for_each_u32(np, "xyz", prop, p, val) { ... }
to this:
u32 val;
of_property_for_each_u32(np, "xyz", val) { ... }
However two variables cannot be declared in the for clause even with C11,
so declare one struct that contain the two variables we actually need. As
the variables inside this struct are not meant to be used by users of this
macro, give the struct instance the noticeable name "_it" so it is visible
during code reviews, helping to avoid new code to use it directly.
Most usages are trivially converted as they do not use those two
parameters, as expected. The non-trivial cases are:
- drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway
- drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the
checks had to be replicated in a different way, making code more verbose
and somewhat uglier, but I refrained from a full rework to keep as much
of the original code untouched having no hardware to test my changes
All the changes have been build tested. The few for which I have the
hardware have been runtime-tested too.
Reviewed-by: Andre Przywara <andre.przywara@arm.com> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # drivers/gpio/gpio-brcmstb.c
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # drivers/irqchip/irq-atmel-aic-common.c
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # drivers/iio/adc/ti_am335x_adc.c
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> # drivers/pwm/pwm-samsung.c
Acked-by: Richard Leitner <richard.leitner@linux.dev> # drivers/usb/misc/usb251xb.c
Acked-by: Mark Brown <broonie@kernel.org> # sound/soc/codecs/arizona.c
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> # sound/soc/codecs/arizona.c
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # arch/powerpc/sysdev/xive/spapr.c
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Julian reports that commit 341ac980eab9 ("xsk: Support tx_metadata_len")
can break existing use cases which don't zero-initialize xdp_umem_reg
padding. Introduce new XDP_UMEM_TX_METADATA_LEN to make sure we
interpret the padding as tx_metadata_len only when being explicitly
asked.
Fixes: 341ac980eab9 ("xsk: Support tx_metadata_len")
Reported-by: Julian Schindel <mail@arctic-alpaca.de>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20240713015253.121248-2-sdf@fomichev.me
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New Support
- Samsung Exynos gs101 drd combo phy
- Qualcomm SC8180x USB uniphy, IPQ9574 QMP PCIe phy
- Airoha EN7581 PCIe phy
- Freescale i.MX8Q HSIO SerDes phy
- Starfive jh7110 dphy tx
Updates:
- Resume support for j721e-wiz driver
- Updates to Exynos usbdrd driver
- Support for optional power domains in g12a usb2-phy driver
- Debugfs support and updates to zynqmp driver"
* tag 'phy-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (56 commits)
phy: airoha: Add dtime and Rx AEQ IO registers
dt-bindings: phy: airoha: Add dtime and Rx AEQ IO registers
dt-bindings: phy: rockchip-emmc-phy: Convert to dtschema
dt-bindings: phy: qcom,qmp-usb: fix spelling error
phy: exynos5-usbdrd: support Exynos USBDRD 3.1 combo phy (HS & SS)
phy: exynos5-usbdrd: convert Vbus supplies to regulator_bulk
phy: exynos5-usbdrd: convert (phy) register access clock to clk_bulk
phy: exynos5-usbdrd: convert core clocks to clk_bulk
phy: exynos5-usbdrd: support isolating HS and SS ports independently
dt-bindings: phy: samsung,usb3-drd-phy: add gs101 compatible
phy: core: Fix documentation of of_phy_get
phy: starfive: Correct the dphy configure process
phy: zynqmp: Add debugfs support
phy: zynqmp: Take the phy mutex in xlate
phy: zynqmp: Only wait for PLL lock "primary" instances
phy: zynqmp: Store instance instead of type
phy: zynqmp: Enable reference clock correctly
phy: cadence-torrent: Check return value on register read
phy: Fix the cacography in phy-exynos5250-usb2.c
phy: phy-rockchip-samsung-hdptx: Select CONFIG_MFD_SYSCON
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Simplification across subsystem using cleanup.h
- Support for debugfs to read/write commands
- Few Intel and Qualcomm driver updates
* tag 'soundwire-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: debugfs: simplify with cleanup.h
soundwire: cadence: simplify with cleanup.h
soundwire: intel_ace2x: simplify with cleanup.h
soundwire: intel_ace2x: simplify return path in hw_params
soundwire: intel: simplify with cleanup.h
soundwire: intel: simplify return path in hw_params
soundwire: amd_init: simplify with cleanup.h
soundwire: amd: simplify with cleanup.h
soundwire: amd: simplify return path in hw_params
soundwire: intel_auxdevice: start the bus at default frequency
soundwire: intel_auxdevice: add cs42l43 codec to wake_capable_list
drivers:soundwire: qcom: cleanup port maask calculations
soundwire: bus: simplify by using local slave->prop
soundwire: generic_bandwidth_allocation: change port_bo parameter to pointer
soundwire: Intel: clarify Copyright information
soundwire: intel_ace2.x: add AC timing extensions for PantherLake
soundwire: bus: add stream refcount
soundwire: debugfs: add interface to read/write commands
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New support:
- New dmaengine_prep_peripheral_dma_vec() to support transfers using
dma vectors and documentation and user in AXI dma
- STMicro STM32 DMA3 support and new capabilities of cyclic dma
Updates:
- Yaml conversion for Freescale imx dma and qdma bindings,
sprd sc9860 dma binding
- Altera msgdma updates for descriptor management"
* tag 'dmaengine-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (35 commits)
dt-bindings: fsl-qdma: fix interrupts 'if' check logic
dt-bindings: dma: sprd,sc9860-dma: convert to YAML
dmaengine: fsl-dpaa2-qdma: add missing MODULE_DESCRIPTION() macro
dmaengine: ti: add missing MODULE_DESCRIPTION() macros
dmaengine: ti: cppi41: add missing MODULE_DESCRIPTION() macro
dmaengine: virt-dma: add missing MODULE_DESCRIPTION() macro
dmaengine: ti: k3-udma: Fix BCHAN count with UHC and HC channels
dmaengine: sh: rz-dmac: Fix lockdep assert warning
dmaengine: qcom: gpi: clean up the IRQ disable/enable in gpi_reset_chan()
dmaengine: fsl-edma: change the memory access from local into remote mode in i.MX 8QM
dmaengine: qcom: gpi: remove unused struct 'reg_info'
dmaengine: moxart-dma: remove unused struct 'moxart_filter_data'
dt-bindings: fsl-qdma: Convert to yaml format
dmaengine: fsl-edma: remove redundant "idle" field from fsl_chan
dmaengine: fsl-edma: request per-channel IRQ only when channel is allocated
dmaengine: stm32-dma3: defer channel registration to specify channel name
dmaengine: add channel device name to channel registration
dmaengine: stm32-dma3: improve residue granularity
dmaengine: stm32-dma3: add device_pause and device_resume ops
dmaengine: stm32-dma3: add DMA_MEMCPY capability
...
|
|
const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ctl_table
structs into .rodata data which will ensure that proc_handler function
pointers cannot be modified.
This patch has been generated by the following coccinelle script:
```
virtual patch
@r1@
identifier ctl, write, buffer, lenp, ppos;
identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)";
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos);
@r2@
identifier func, ctl, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos)
{ ... }
@r3@
identifier func;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int , void *, size_t *, loff_t *);
@r4@
identifier func, ctl;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int , void *, size_t *, loff_t *);
@r5@
identifier func, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int write, void *buffer, size_t *lenp, loff_t *ppos);
```
* Code formatting was adjusted in xfs_sysctl.c to comply with code
conventions. The xfs_stats_clear_proc_handler,
xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where
adjusted.
* The ctl_table argument in proc_watchdog_common was const qualified.
This is called from a proc_handler itself and is calling back into
another proc_handler, making it necessary to change it as part of the
proc_handler migration.
Co-developed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Co-developed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"This adds getrandom() support to the vDSO.
First, it adds a new kind of mapping to mmap(2), MAP_DROPPABLE, which
lets the kernel zero out pages anytime under memory pressure, which
enables allocating memory that never gets swapped to disk but also
doesn't count as being mlocked.
Then, the vDSO implementation of getrandom() is introduced in a
generic manner and hooked into random.c.
Next, this is implemented on x86. (Also, though it's not ready for
this pull, somebody has begun an arm64 implementation already)
Finally, two vDSO selftests are added.
There are also two housekeeping cleanup commits"
* tag 'random-6.11-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
MAINTAINERS: add random.h headers to RNG subsection
random: note that RNDGETPOOL was removed in 2.6.9-rc2
selftests/vDSO: add tests for vgetrandom
x86: vdso: Wire up getrandom() vDSO implementation
random: introduce generic vDSO getrandom() implementation
mm: add MAP_DROPPABLE for designating always lazily freeable mappings
|
|
We removed the reliance on the flag by the cancellation path and now
it's unused.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e57afe566bbe4fefeb44daffb08900f2a4756577.1721819383.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"A pretty small update including mostly minor bug fixes in zoned
storage along with the large section support.
Enhancements:
- add support for FS_IOC_GETFSSYSFSPATH
- enable atgc dynamically if conditions are met
- use new ioprio Macro to get ckpt thread ioprio level
- remove unreachable lazytime mount option parsing
Bug fixes:
- fix null reference error when checking end of zone
- fix start segno of large section
- fix to cover read extent cache access with lock
- don't dirty inode for readonly filesystem
- allocate a new section if curseg is not the first seg in its zone
- only fragment segment in the same section
- truncate preallocated blocks in f2fs_file_open()
- fix to avoid use SSR allocate when do defragment
- fix to force buffered IO on inline_data inode
And some minor code clean-ups and sanity checks"
* tag 'f2fs-for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (26 commits)
f2fs: clean up addrs_per_{inode,block}()
f2fs: clean up F2FS_I()
f2fs: use meta inode for GC of COW file
f2fs: use meta inode for GC of atomic file
f2fs: only fragment segment in the same section
f2fs: fix to update user block counts in block_operations()
f2fs: remove unreachable lazytime mount option parsing
f2fs: fix null reference error when checking end of zone
f2fs: fix start segno of large section
f2fs: remove redundant sanity check in sanity_check_inode()
f2fs: assign CURSEG_ALL_DATA_ATGC if blkaddr is valid
f2fs: fix to use mnt_{want,drop}_write_file replace file_{start,end}_wrtie
f2fs: clean up set REQ_RAHEAD given rac
f2fs: enable atgc dynamically if conditions are met
f2fs: fix to truncate preallocated blocks in f2fs_file_open()
f2fs: fix to cover read extent cache access with lock
f2fs: fix return value of f2fs_convert_inline_inode()
f2fs: use new ioprio Macro to get ckpt thread ioprio level
f2fs: fix to don't dirty inode for readonly filesystem
f2fs: fix to avoid use SSR allocate when do defragment
...
|
|
Pull jfs updates from David Kleikamp:
"Folio conversion from Matthew Wilcox and a few various fixes"
* tag 'jfs-6.11' of github.com:kleikamp/linux-shaggy:
jfs: don't walk off the end of ealist
jfs: Fix shift-out-of-bounds in dbDiscardAG
jfs: Fix array-index-out-of-bounds in diFree
jfs: fix null ptr deref in dtInsertEntry
jfs: Remove use of folio error flag
fs: Remove i_blocks_per_page
jfs: Change metapage->page to metapage->folio
jfs: Convert force_metapage to use a folio
jfs: Convert inc_io to take a folio
jfs: Convert page_to_mp to folio_to_mp
jfs; Convert __invalidate_metapages to use a folio
jfs: Convert dec_io to take a folio
jfs: Convert drop_metapage and remove_metapage to take a folio
jfs; Convert release_metapage to use a folio
jfs: Convert insert_metapage() to take a folio
jfs: Convert __get_metapage to use a folio
jfs: Convert metapage_writepage to metapage_write_folio
jfs: Convert metapage_read_folio to use folio APIs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove tristate choice support from Kconfig
- Stop using the PROVIDE() directive in the linker script
- Reduce the number of links for the combination of CONFIG_KALLSYMS and
CONFIG_DEBUG_INFO_BTF
- Enable the warning for symbol reference to .exit.* sections by
default
- Fix warnings in RPM package builds
- Improve scripts/make_fit.py to generate a FIT image with separate
base DTB and overlays
- Improve choice value calculation in Kconfig
- Fix conditional prompt behavior in choice in Kconfig
- Remove support for the uncommon EMAIL environment variable in Debian
package builds
- Remove support for the uncommon "name <email>" form for the DEBEMAIL
environment variable
- Raise the minimum supported GNU Make version to 4.0
- Remove stale code for the absolute kallsyms
- Move header files commonly used for host programs to scripts/include/
- Introduce the pacman-pkg target to generate a pacman package used in
Arch Linux
- Clean up Kconfig
* tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (65 commits)
kbuild: doc: gcc to CC change
kallsyms: change sym_entry::percpu_absolute to bool type
kallsyms: unify seq and start_pos fields of struct sym_entry
kallsyms: add more original symbol type/name in comment lines
kallsyms: use \t instead of a tab in printf()
kallsyms: avoid repeated calculation of array size for markers
kbuild: add script and target to generate pacman package
modpost: use generic macros for hash table implementation
kbuild: move some helper headers from scripts/kconfig/ to scripts/include/
Makefile: add comment to discourage tools/* addition for kernel builds
kbuild: clean up scripts/remove-stale-files
kconfig: recursive checks drop file/lineno
kbuild: rpm-pkg: introduce a simple changelog section for kernel.spec
kallsyms: get rid of code for absolute kallsyms
kbuild: Create INSTALL_PATH directory if it does not exist
kbuild: Abort make on install failures
kconfig: remove 'e1' and 'e2' macros from expression deduplication
kconfig: remove SYMBOL_CHOICEVAL flag
kconfig: add const qualifiers to several function arguments
kconfig: call expr_eliminate_yn() at least once in expr_eliminate_dups()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- The maximum amount of DDR memory used by the Mediatek MT8188/MT8195
SCP is increased to handle new use cases. Handling of optional L1TCM
memory is made actually optional.
- An optimization is introduced to only clear the unused portion of IPI
shared buffers, rather than the entire buffer before writing the
message.
- Detection for IPC-only mode in the TI K3 DSP remoteproc driver is
corrected. The loglevel of a debug print in the same is lowered from
error.
- Support for attaching to an running remote processor is added to the
Xilinx R5F.
- An in-kernel implementation of the Qualcomm "protected domain mapper"
(aka service registry) service is introduced, to remove the
dependency on a userspace implementation to detect when the battery
monitor and USB Type-C port manager becomes available. This is then
integrated with the Qualcomm remoteproc driver.
- The Qualcomm PAS remoteproc driver gains support for attempting to
bust hwspinlocks held by the remote processor when it
crashed/stopped.
- The TI OMAP remoteproc driver is transitioned to use devres helpers
for various forms of allocations.
- Parsing of memory-regions in the i.MX remoteproc driver is improved
to avoid a NULL pointer dereference if the phandle reference is
empty. of_node reference counting is corrected in the same.
* tag 'rproc-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: mediatek: Increase MT8188/MT8195 SCP core0 DRAM size
remoteproc: k3-dsp: Fix log levels where appropriate
remoteproc: xlnx: Add attach detach support
remoteproc: qcom: select AUXILIARY_BUS
remoteproc: k3-r5: Fix IPC-only mode detection
remoteproc: mediatek: Don't attempt to remap l1tcm memory if missing
remoteproc: qcom: enable in-kernel PD mapper
dt-bindings: remoteproc: imx_rproc: Add minItems for power-domain
remoteproc: imx_rproc: Fix refcount mistake in imx_rproc_addr_init
remoteproc: omap: Use devm_rproc_add() helper
remoteproc: omap: Use devm action to release reserved memory
remoteproc: omap: Use devm_rproc_alloc() helper
remoteproc: imx_rproc: Skip over memory region when node value is NULL
dt-bindings: remoteproc: k3-dsp: Correct optional sram properties for AM62A SoCs
remoteproc: qcom_q6v5_pas: Add hwspinlock bust on stop
soc: qcom: smem: Add qcom_smem_bust_hwspin_lock_by_host()
remoteproc: mediatek: Zero out only remaining bytes of IPI buffer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull hwspinlock updates from Bjorn Andersson:
"This introduces a mechanism in the hardware spinlock framework, and
the Qualcomm TCSR mutex driver, for allowing clients to bust locks
held by a remote processor in the event that this enters a faulty
state while holding the shared lock"
* tag 'hwlock-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
hwspinlock: qcom: implement bust operation
hwspinlock: Introduce hwspin_lock_bust()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module update from Luis Chamberlain:
"This is a super boring development cycle this time around for modules,
there is only one patch in this pull request.
The patch deals with a corner case set of dependencies which is not
resolved today to ensure users get the module they need on initramfs.
Currently only one module is known to exist which needs this, however
this can grow to capture other corner cases likely escaped and not
reported before. The kernel change is just a section update, the real
work is done and merged already on upstream kmod.
This has been on linux-next for 3 weeks now"
* tag 'modules-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: create weak dependecies
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
"The I2C core has two header documentation updates as the dependecies
are in now.
The I2C host drivers add some patches which nearly fell through the
cracks:
- Added descriptions in the DTS for the Qualcomm SM8650 and SM8550
Camera Control Interface (CCI).
- Added support for the "settle-time-us" property, which allows the
gpio-mux device to switch from one bus to another with a
configurable delay. The time can be set in the DTS. The latest
change also includes file sorting.
- Fixed slot numbering in the SMBus framework to prevent failures
when more than 8 slots are occupied. It now enforces a a maximum of
8 slots to be used. This ensures that the Intel PIIX4 device can
register the SPDs correctly without failure, even if other slots
are populated but not used"
* tag 'i2c-for-6.11-rc1-second-batch' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: header: improve kdoc for i2c_algorithm
i2c: header: remove unneeded stuff regarding i2c_algorithm
i2c: piix4: Register SPDs
i2c: smbus: remove i801 assumptions from SPD probing
i2c: mux: gpio: Add support for the 'settle-time-us' property
i2c: mux: gpio: Re-order #include to match alphabetic order
dt-bindings: i2c: mux-gpio: Add 'settle-time-us' property
dt-bindings: i2c: qcom-cci: Document sm8650 compatible
dt-bindings: i2c: qcom-cci: Document sm8550 compatible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- new charging_orange_full_green RGB LED trigger
- simplify and cleanup power-supply LED trigger code
- expose power information via hwmon compatibility layer
New hardware support:
- enable battery support for Qualcomm Snapdragon X Elite
- new battery driver for Maxim MAX17201/MAX17205
- new battery driver for Lenovo Yoga C630 laptop (custom EC)
Cleanups:
- cleanup 'struct i2c_device_id' initializations
- misc small battery driver cleanups and fixes"
* tag 'for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: sysfs: use power_supply_property_is_writeable()
power: supply: qcom_battmgr: Enable battery support on x1e80100
power: supply: add support for MAX1720x standalone fuel gauge
dt-bindings: power: supply: add support for MAX17201/MAX17205 fuel gauge
power: reset: piix4: add missing MODULE_DESCRIPTION() macro
power: supply: samsung-sdi-battery: Constify struct power_supply_maintenance_charge_table
power: supply: samsung-sdi-battery: Constify struct power_supply_vbat_ri_table
power: supply: lenovo_yoga_c630_battery: add Lenovo C630 driver
power: supply: ingenic: Fix some error handling paths in ingenic_battery_get_property()
power: supply: ab8500: Clean some error messages
power: supply: ab8500: Use iio_read_channel_processed_scale()
power: supply: ab8500: Fix error handling when calling iio_read_channel_processed()
power: supply: hwmon: Add support for power sensors
power: supply: ab8500: remove unused struct 'inst_curr_result_list'
power: supply: bd99954: remove unused struct 'battery_data'
power: supply: leds: Add activate() callback to triggers
power: supply: leds: Share trig pointer for online and charging_full
power: supply: leds: Add power_supply_[un]register_led_trigger()
power: supply: Drop explicit initialization of struct i2c_device_id::driver_data to 0
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI interrupt updates from Thomas Gleixner:
"Switch ARM/ARM64 over to the modern per device MSI domains.
This simplifies the handling of platform MSI and wire to MSI
controllers and removes about 500 lines of legacy code.
Aside of that it paves the way for ARM/ARM64 to utilize the dynamic
allocation of PCI/MSI interrupts and to support the upcoming non
standard IMS (Interrupt Message Store) mechanism on PCIe devices"
* tag 'irq-msi-2024-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
irqchip/gic-v3-its: Correctly fish out the DID for platform MSI
irqchip/gic-v3-its: Correctly honor the RID remapping
genirq/msi: Move msi_device_data to core
genirq/msi: Remove platform MSI leftovers
irqchip/irq-mvebu-icu: Remove platform MSI leftovers
irqchip/irq-mvebu-sei: Switch to MSI parent
irqchip/mvebu-odmi: Switch to parent MSI
irqchip/mvebu-gicp: Switch to MSI parent
irqchip/irq-mvebu-icu: Prepare for real per device MSI
irqchip/imx-mu-msi: Switch to MSI parent
irqchip/gic-v2m: Switch to device MSI
irqchip/gic_v3_mbi: Switch over to parent domain
genirq/msi: Remove platform_msi_create_device_domain()
irqchip/mbigen: Remove platform_msi_create_device_domain() fallback
irqchip/gic-v3-its: Switch platform MSI to MSI parent
irqchip/irq-msi-lib: Prepare for DOMAIN_BUS_WIRED_TO_MSI
irqchip/mbigen: Prepare for real per device MSI
irqchip/irq-msi-lib: Prepare for DEVICE MSI to replace platform MSI
irqchip/gic-v3-its: Provide MSI parent for PCI/MSI[-X]
irqchip/irq-msi-lib: Prepare for PCI MSI/MSIX
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Core:
- Provide a new mechanism to create interrupt domains. The existing
interfaces have already too many parameters and it's a pain to
expand any of this for new required functionality.
The new function takes a pointer to a data structure as argument.
The data structure combines all existing parameters and allows for
easy extension.
The first extension for this is to handle the instantiation of
generic interrupt chips at the core level and to allow drivers to
provide extra init/exit callbacks.
This is necessary to do the full interrupt chip initialization
before the new domain is published, so that concurrent usage sites
won't see a half initialized interrupt domain. Similar problems
exist on teardown.
This has turned out to be a real problem due to the deferred and
parallel probing which was added in recent years.
Handling this at the core level allows to remove quite some accrued
boilerplate code in existing drivers and avoids horrible
workarounds at the driver level.
- The usual small improvements all over the place
Drivers:
- Add support for LAN966x OIC and RZ/Five SoC
- Split the STM ExtI driver into a microcontroller and a SMP version
to allow building the latter as a module for multi-platform
kernels
- Enable MSI support for Armada 370XP on platforms which do not
support IPIs
- The usual small fixes and enhancements all over the place"
* tag 'irq-core-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
irqdomain: Fix the kernel-doc and plug it into Documentation
genirq: Set IRQF_COND_ONESHOT in request_irq()
irqchip/imx-irqsteer: Handle runtime power management correctly
irqchip/gic-v3: Pass #redistributor-regions to gic_of_setup_kvm_info()
irqchip/bcm2835: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
irqchip/gic-v4: Make sure a VPE is locked when VMAPP is issued
irqchip/gic-v4: Substitute vmovp_lock for a per-VM lock
irqchip/gic-v4: Always configure affinity on VPE activation
Revert "irqchip/dw-apb-ictl: Support building as module"
Revert "Loongarch: Support loongarch avec"
arm64: Kconfig: Allow build irq-stm32mp-exti driver as module
ARM: stm32: Allow build irq-stm32mp-exti driver as module
irqchip/stm32mp-exti: Allow building as module
irqchip/stm32mp-exti: Rename internal symbols
irqchip/stm32-exti: Split MCU and MPU code
arm64: Kconfig: Select STM32MP_EXTI on STM32 platforms
ARM: stm32: Use different EXTI driver on ARMv7m and ARMv7a
irqchip/stm32-exti: Add CONFIG_STM32MP_EXTI
irqchip/dw-apb-ictl: Support building as module
irqchip/riscv-aplic: Simplify the initialization code
...
|
|
Pull more block updates from Jens Axboe:
- MD fixes via Song:
- md-cluster fixes (Heming Zhao)
- raid1 fix (Mateusz Jończyk)
- s390/dasd module description (Jeff)
- Series cleaning up and hardening the blk-mq debugfs flag handling
(John, Christoph)
- blk-cgroup cleanup (Xiu)
- Error polled IO attempts if backend doesn't support it (hexue)
- Fix for an sbitmap hang (Yang)
* tag 'for-6.11/block-20240722' of git://git.kernel.dk/linux: (23 commits)
blk-cgroup: move congestion_count to struct blkcg
sbitmap: fix io hung due to race on sbitmap_word::cleared
block: avoid polling configuration errors
block: Catch possible entries missing from rqf_name[]
block: Simplify definition of RQF_NAME()
block: Use enum to define RQF_x bit indexes
block: Catch possible entries missing from cmd_flag_name[]
block: Catch possible entries missing from alloc_policy_name[]
block: Catch possible entries missing from hctx_flag_name[]
block: Catch possible entries missing from hctx_state_name[]
block: Catch possible entries missing from blk_queue_flag_name[]
block: Make QUEUE_FLAG_x as an enum
block: Relocate BLK_MQ_MAX_DEPTH
block: Relocate BLK_MQ_CPU_WORK_BATCH
block: remove QUEUE_FLAG_STOPPED
block: Add missing entry to hctx_flag_name[]
block: Add zone write plugging entry to rqf_name[]
block: Add missing entries from cmd_flag_name[]
s390/dasd: fix error checks in dasd_copy_pair_store()
s390/dasd: add missing MODULE_DESCRIPTION() macros
...
|
|
Pull block integrity mapping updates from Jens Axboe:
"A set of cleanups and fixes for the block integrity support.
Sent separately from the main block changes from last week, as they
depended on later fixes in the 6.10-rc cycle"
* tag 'for-6.11/block-post-20240722' of git://git.kernel.dk/linux:
block: don't free the integrity payload in bio_integrity_unmap_free_user
block: don't free submitter owned integrity payload on I/O completion
block: call bio_integrity_unmap_free_user from blk_rq_unmap_user
block: don't call bio_uninit from bio_endio
block: also return bio_integrity_payload * from stubs
block: split integrity support out of bio.h
|
|
Haibo Xu <haibo1.xu@intel.com> says:
This patch series enable RISC-V ACPI NUMA support which was based on
the recently approved ACPI ECR[1].
Patch 1/4 add RISC-V specific acpi_numa.c file to parse NUMA information
from SRAT and SLIT ACPI tables.
Patch 2/4 add the common SRAT RINTC affinity structure handler.
Patch 3/4 change the ACPI_NUMA to a hidden option since it would be selected
by default on all supported platform.
Patch 4/4 replace pr_info with pr_debug in arch_acpi_numa_init() to avoid
potential boot noise on ACPI platforms that are not NUMA.
Based-on: https://github.com/linux-riscv/linux-riscv/tree/for-next
[1] https://drive.google.com/file/d/1YTdDx2IPm5IeZjAW932EYU-tUtgS08tX/view?usp=sharing
Testing:
Since the ACPI AIA/PLIC support patch set is still under upstream review,
hence it is tested using the poll based HVC SBI console and RAM disk.
1) Build latest Qemu with the following patch backported
https://github.com/vlsunil/qemu/commit/42bd4eeefd5d4410a68f02d54fee406d8a1269b0
2) Build latest EDK-II
https://github.com/tianocore/edk2/blob/master/OvmfPkg/RiscVVirt/README.md
3) Build Linux with the following configs enabled
CONFIG_RISCV_SBI_V01=y
CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
CONFIG_NONPORTABLE=y
CONFIG_HVC_RISCV_SBI=y
CONFIG_NUMA=y
CONFIG_ACPI_NUMA=y
4) Build buildroot rootfs.cpio
5) Launch the Qemu machine
qemu-system-riscv64 -nographic \
-machine virt,pflash0=pflash0,pflash1=pflash1 -smp 4 -m 8G \
-blockdev node-name=pflash0,driver=file,read-only=on,filename=RISCV_VIRT_CODE.fd \
-blockdev node-name=pflash1,driver=file,filename=RISCV_VIRT_VARS.fd \
-object memory-backend-ram,size=4G,id=m0 \
-object memory-backend-ram,size=4G,id=m1 \
-numa node,memdev=m0,cpus=0-1,nodeid=0 \
-numa node,memdev=m1,cpus=2-3,nodeid=1 \
-numa dist,src=0,dst=1,val=30 \
-kernel linux/arch/riscv/boot/Image \
-initrd buildroot/output/images/rootfs.cpio \
-append "root=/dev/ram ro console=hvc0 earlycon=sbi"
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x80000000-0x17fffffff]
[ 0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x180000000-0x27fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x17fe3bc40-0x17fe3cfff]
[ 0.000000] NUMA: NODE_DATA [mem 0x27fff4c40-0x27fff5fff]
...
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> HARTID 0x0 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> HARTID 0x1 -> Node 0
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> HARTID 0x2 -> Node 1
[ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> HARTID 0x3 -> Node 1
* b4-shazam-merge:
ACPI: NUMA: replace pr_info with pr_debug in arch_acpi_numa_init
ACPI: NUMA: change the ACPI_NUMA to a hidden option
ACPI: NUMA: Add handler for SRAT RINTC affinity structure
ACPI: RISCV: Add NUMA support based on SRAT and SLIT
Link: https://lore.kernel.org/r/cover.1718268003.git.haibo1.xu@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
childmask in the group reflects the mask that is required to 'reference'
this group in the parent. When reading childmask, this might be confusing,
as this suggests, that this is the mask of the child of the group.
Clarify this by renaming childmask in the tmigr_group and tmc_group by
groupmask.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240716-tmigr-fixes-v4-6-757baa7803fe@linutronix.de
|
|
When a CPU comes online the first time, it is possible that a new top level
group will be created. In general all propagation is done from the bottom
to top. This minimizes complexity and prevents possible races. But when a
new top level group is created, the formely top level group needs to be
connected to the new level. This is the only time, when the direction to
propagate changes is changed: the changes are propagated from top (new top
level group) to bottom (formerly top level group).
This introduces two races (see (A) and (B)) as reported by Frederic:
(A) This race happens, when marking the formely top level group as active,
but the last active CPU of the formerly top level group goes idle. Then
it's likely that formerly group is no longer active, but marked
nevertheless as active in new top level group:
[GRP0:0]
migrator = 0
active = 0
nextevt = KTIME_MAX
/ \
0 1 .. 7
active idle
0) Hierarchy has for now only 8 CPUs and CPU 0 is the only active CPU.
[GRP1:0]
migrator = TMIGR_NONE
active = NONE
nextevt = KTIME_MAX
\
[GRP0:0] [GRP0:1]
migrator = 0 migrator = TMIGR_NONE
active = 0 active = NONE
nextevt = KTIME_MAX nextevt = KTIME_MAX
/ \
0 1 .. 7 8
active idle !online
1) CPU 8 is booting and creates a new group in first level GRP0:1 and
therefore also a new top group GRP1:0. For now the setup code proceeded
only until the connected between GRP0:1 to the new top group. The
connection between CPU8 and GRP0:1 is not yet established and CPU 8 is
still !online.
[GRP1:0]
migrator = TMIGR_NONE
active = NONE
nextevt = KTIME_MAX
/ \
[GRP0:0] [GRP0:1]
migrator = 0 migrator = TMIGR_NONE
active = 0 active = NONE
nextevt = KTIME_MAX nextevt = KTIME_MAX
/ \
0 1 .. 7 8
active idle !online
2) Setup code now connects GRP0:0 to GRP1:0 and observes while in
tmigr_connect_child_parent() that GRP0:0 is not TMIGR_NONE. So it
prepares to call tmigr_active_up() on it. It hasn't done it yet.
[GRP1:0]
migrator = TMIGR_NONE
active = NONE
nextevt = KTIME_MAX
/ \
[GRP0:0] [GRP0:1]
migrator = TMIGR_NONE migrator = TMIGR_NONE
active = NONE active = NONE
nextevt = KTIME_MAX nextevt = KTIME_MAX
/ \
0 1 .. 7 8
idle idle !online
3) CPU 0 goes idle. Since GRP0:0->parent has been updated by CPU 8 with
GRP0:0->lock held, CPU 0 observes GRP1:0 after calling
tmigr_update_events() and it propagates the change to the top (no change
there and no wakeup programmed since there is no timer).
[GRP1:0]
migrator = GRP0:0
active = GRP0:0
nextevt = KTIME_MAX
/ \
[GRP0:0] [GRP0:1]
migrator = TMIGR_NONE migrator = TMIGR_NONE
active = NONE active = NONE
nextevt = KTIME_MAX nextevt = KTIME_MAX
/ \
0 1 .. 7 8
idle idle !online
4) Now the setup code finally calls tmigr_active_up() to and sets GRP0:0
active in GRP1:0
[GRP1:0]
migrator = GRP0:0
active = GRP0:0, GRP0:1
nextevt = KTIME_MAX
/ \
[GRP0:0] [GRP0:1]
migrator = TMIGR_NONE migrator = 8
active = NONE active = 8
nextevt = KTIME_MAX nextevt = KTIME_MAX
/ \ |
0 1 .. 7 8
idle idle active
5) Now CPU 8 is connected with GRP0:1 and CPU 8 calls tmigr_active_up() out
of tmigr_cpu_online().
[GRP1:0]
migrator = GRP0:0
active = GRP0:0
nextevt = T8
/ \
[GRP0:0] [GRP0:1]
migrator = TMIGR_NONE migrator = TMIGR_NONE
active = NONE active = NONE
nextevt = KTIME_MAX nextevt = T8
/ \ |
0 1 .. 7 8
idle idle idle
5) CPU 8 goes idle with a timer T8 and relies on GRP0:0 as the migrator.
But it's not really active, so T8 gets ignored.
--> The update which is done in third step is not noticed by setup code. So
a wrong migrator is set to top level group and a timer could get
ignored.
(B) Reading group->parent and group->childmask when an hierarchy update is
ongoing and reaches the formerly top level group is racy as those values
could be inconsistent. (The notation of migrator and active now slightly
changes in contrast to the above example, as now the childmasks are used.)
[GRP1:0]
migrator = TMIGR_NONE
active = 0x00
nextevt = KTIME_MAX
\
[GRP0:0] [GRP0:1]
migrator = TMIGR_NONE migrator = TMIGR_NONE
active = 0x00 active = 0x00
nextevt = KTIME_MAX nextevt = KTIME_MAX
childmask= 0 childmask= 1
parent = NULL parent = GRP1:0
/ \
0 1 .. 7 8
idle idle !online
childmask=1
1) Hierarchy has 8 CPUs. CPU 8 is at the moment in the process of onlining
but did not yet connect GRP0:0 to GRP1:0.
[GRP1:0]
migrator = TMIGR_NONE
active = 0x00
nextevt = KTIME_MAX
/ \
[GRP0:0] [GRP0:1]
migrator = TMIGR_NONE migrator = TMIGR_NONE
active = 0x00 active = 0x00
nextevt = KTIME_MAX nextevt = KTIME_MAX
childmask= 0 childmask= 1
parent = GRP1:0 parent = GRP1:0
/ \
0 1 .. 7 8
idle idle !online
childmask=1
2) Setup code (running on CPU 8) now connects GRP0:0 to GRP1:0, updates
parent pointer of GRP0:0 and ...
[GRP1:0]
migrator = TMIGR_NONE
active = 0x00
nextevt = KTIME_MAX
/ \
[GRP0:0] [GRP0:1]
migrator = 0x01 migrator = TMIGR_NONE
active = 0x01 active = 0x00
nextevt = KTIME_MAX nextevt = KTIME_MAX
childmask= 0 childmask= 1
parent = GRP1:0 parent = GRP1:0
/ \
0 1 .. 7 8
active idle !online
childmask=1
tmigr_walk.childmask = 0
3) ... CPU 0 comes active in the same time. As migrator in GRP0:0 was
TMIGR_NONE, childmask of GRP0:0 is stored in update propagation data
structure tmigr_walk (as update of childmask is not yet
visible/updated). And now ...
[GRP1:0]
migrator = TMIGR_NONE
active = 0x00
nextevt = KTIME_MAX
/ \
[GRP0:0] [GRP0:1]
migrator = 0x01 migrator = TMIGR_NONE
active = 0x01 active = 0x00
nextevt = KTIME_MAX nextevt = KTIME_MAX
childmask= 2 childmask= 1
parent = GRP1:0 parent = GRP1:0
/ \
0 1 .. 7 8
active idle !online
childmask=1
tmigr_walk.childmask = 0
4) ... childmask of GRP0:0 is updated by CPU 8 (still part of setup
code).
[GRP1:0]
migrator = 0x00
active = 0x00
nextevt = KTIME_MAX
/ \
[GRP0:0] [GRP0:1]
migrator = 0x01 migrator = TMIGR_NONE
active = 0x01 active = 0x00
nextevt = KTIME_MAX nextevt = KTIME_MAX
childmask= 2 childmask= 1
parent = GRP1:0 parent = GRP1:0
/ \
0 1 .. 7 8
active idle !online
childmask=1
tmigr_walk.childmask = 0
5) CPU 0 sees the connection to GRP1:0 and now propagates active state to
GRP1:0 but with childmask = 0 as stored in propagation data structure.
--> Now GRP1:0 alway |
