| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 761fb8ec8778f0caf2bba5a41e3cff1ea86974f3 upstream.
This attempt to fix regressions caused by reusing ident which apparently
is not handled well on certain stacks causing the stack to not respond to
requests, so instead of simple returning the first unallocated id this
stores the last used tx_ident and then attempt to use the next until all
available ids are exausted and then cycle starting over to 1.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221120
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221177
Fixes: 6c3ea155e5ee ("Bluetooth: L2CAP: Fix not tracking outstanding TX ident")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 190a8c48ff623c3d67cb295b4536a660db2012aa ]
During futex_key_to_node_opt() execution, vma->vm_policy is read under
speculative mmap lock and RCU. Concurrently, mbind() may call
vma_replace_policy() which frees the old mempolicy immediately via
kmem_cache_free().
This creates a race where __futex_key_to_node() dereferences a freed
mempolicy pointer, causing a use-after-free read of mpol->mode.
[ 151.412631] BUG: KASAN: slab-use-after-free in __futex_key_to_node (kernel/futex/core.c:349)
[ 151.414046] Read of size 2 at addr ffff888001c49634 by task e/87
[ 151.415969] Call Trace:
[ 151.416732] __asan_load2 (mm/kasan/generic.c:271)
[ 151.416777] __futex_key_to_node (kernel/futex/core.c:349)
[ 151.416822] get_futex_key (kernel/futex/core.c:374 kernel/futex/core.c:386 kernel/futex/core.c:593)
Fix by adding rcu to __mpol_put().
Fixes: c042c505210d ("futex: Implement FUTEX2_MPOL")
Reported-by: Hao-Yu Yang <naup96721@gmail.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Hao-Yu Yang <naup96721@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Link: https://patch.msgid.link/20260324174418.GB1850007@noisy.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0e764b9d46071668969410ec5429be0e2f38c6d3 ]
The netfs_io_stream::front member is meant to point to the subrequest
currently being collected on a stream, but it isn't actually used this way
by direct write (which mostly ignores it). However, there's a tracepoint
which looks at it. Further, stream->front is actually redundant with
stream->subrequests.next.
Fix the potential problem in the direct code by just removing the member
and using stream->subrequests.next instead, thereby also simplifying the
code.
Fixes: a0b4c7a49137 ("netfs: Fix unbuffered/DIO writes to dispatch subrequests in strict sequence")
Reported-by: Paulo Alcantara <pc@manguebit.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/4158599.1774426817@warthog.procyon.org.uk
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4c5e7f0fcd592801c9cc18f29f80fbee84eb8669 ]
On arm64 server, we found folio that get from migration entry isn't locked
in softleaf_to_folio(). This issue triggers when mTHP splitting and
zap_nonpresent_ptes() races, and the root cause is lack of memory barrier
in softleaf_to_folio(). The race is as follows:
CPU0 CPU1
deferred_split_scan() zap_nonpresent_ptes()
lock folio
split_folio()
unmap_folio()
change ptes to migration entries
__split_folio_to_order() softleaf_to_folio()
set flags(including PG_locked) for tail pages folio = pfn_folio(softleaf_to_pfn(entry))
smp_wmb() VM_WARN_ON_ONCE(!folio_test_locked(folio))
prep_compound_page() for tail pages
In __split_folio_to_order(), smp_wmb() guarantees page flags of tail pages
are visible before the tail page becomes non-compound. smp_wmb() should
be paired with smp_rmb() in softleaf_to_folio(), which is missed. As a
result, if zap_nonpresent_ptes() accesses migration entry that stores tail
pfn, softleaf_to_folio() may see the updated compound_head of tail page
before page->flags.
This issue will trigger VM_WARN_ON_ONCE() in pfn_swap_entry_folio()
because of the race between folio split and zap_nonpresent_ptes()
leading to a folio incorrectly undergoing modification without a folio
lock being held.
This is a BUG_ON() before commit 93976a20345b ("mm: eliminate further
swapops predicates"), which in merged in v6.19-rc1.
To fix it, add missing smp_rmb() if the softleaf entry is migration entry
in softleaf_to_folio() and softleaf_to_page().
[tujinjiang@huawei.com: update function name and comments]
Link: https://lkml.kernel.org/r/20260321075214.3305564-1-tujinjiang@huawei.com
Link: https://lkml.kernel.org/r/20260319012541.4158561-1-tujinjiang@huawei.com
Fixes: e9b61f19858a ("thp: reintroduce split_huge_page()")
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Barry Song <baohua@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ applied fix to swapops.h using old pfn_swap_entry/swp_entry_t naming ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 26f775a054c3cda86ad465a64141894a90a9e145 upstream.
One major usage of damon_call() is online DAMON parameters update. It is
done by calling damon_commit_ctx() inside the damon_call() callback
function. damon_commit_ctx() can fail for two reasons: 1) invalid
parameters and 2) internal memory allocation failures. In case of
failures, the damon_ctx that attempted to be updated (commit destination)
can be partially updated (or, corrupted from a perspective), and therefore
shouldn't be used anymore. The function only ensures the damon_ctx object
can safely deallocated using damon_destroy_ctx().
The API callers are, however, calling damon_commit_ctx() only after
asserting the parameters are valid, to avoid damon_commit_ctx() fails due
to invalid input parameters. But it can still theoretically fail if the
internal memory allocation fails. In the case, DAMON may run with the
partially updated damon_ctx. This can result in unexpected behaviors
including even NULL pointer dereference in case of damos_commit_dests()
failure [1]. Such allocation failure is arguably too small to fail, so
the real world impact would be rare. But, given the bad consequence, this
needs to be fixed.
Avoid such partially-committed (maybe-corrupted) damon_ctx use by saving
the damon_commit_ctx() failure on the damon_ctx object. For this,
introduce damon_ctx->maybe_corrupted field. damon_commit_ctx() sets it
when it is failed. kdamond_call() checks if the field is set after each
damon_call_control->fn() is executed. If it is set, ignore remaining
callback requests and return. All kdamond_call() callers including
kdamond_fn() also check the maybe_corrupted field right after
kdamond_call() invocations. If the field is set, break the kdamond_fn()
main loop so that DAMON sill doesn't use the context that might be
corrupted.
[sj@kernel.org: let kdamond_call() with cancel regardless of maybe_corrupted]
Link: https://lkml.kernel.org/r/20260320031553.2479-1-sj@kernel.org
Link: https://sashiko.dev/#/patchset/20260319145218.86197-1-sj%40kernel.org
Link: https://lkml.kernel.org/r/20260319145218.86197-1-sj@kernel.org
Link: https://lore.kernel.org/20260319043309.97966-1-sj@kernel.org [1]
Fixes: 3301f1861d34 ("mm/damon/sysfs: handle commit command using damon_call()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 76f9377cd2ab7a9220c25d33940d9ca20d368172 upstream.
Add a SB_I_NO_DATA_INTEGRITY superblock flag for filesystems that cannot
guarantee data persistence on sync (eg fuse). For superblocks with this
flag set, sync kicks off writeback of dirty inodes but does not wait
for the flusher threads to complete the writeback.
This replaces the per-inode AS_NO_DATA_INTEGRITY mapping flag added in
commit f9a49aa302a0 ("fs/writeback: skip AS_NO_DATA_INTEGRITY mappings
in wait_sb_inodes()"). The flag belongs at the superblock level because
data integrity is a filesystem-wide property, not a per-inode one.
Having this flag at the superblock level also allows us to skip having
to iterate every dirty inode in wait_sb_inodes() only to skip each inode
individually.
Prior to this commit, mappings with no data integrity guarantees skipped
waiting on writeback completion but still waited on the flusher threads
to finish initiating the writeback. Waiting on the flusher threads is
unnecessary. This commit kicks off writeback but does not wait on the
flusher threads. This change properly addresses a recent report [1] for
a suspend-to-RAM hang seen on fuse-overlayfs that was caused by waiting
on the flusher threads to finish:
Workqueue: pm_fs_sync pm_fs_sync_work_fn
Call Trace:
<TASK>
__schedule+0x457/0x1720
schedule+0x27/0xd0
wb_wait_for_completion+0x97/0xe0
sync_inodes_sb+0xf8/0x2e0
__iterate_supers+0xdc/0x160
ksys_sync+0x43/0xb0
pm_fs_sync_work_fn+0x17/0xa0
process_one_work+0x193/0x350
worker_thread+0x1a1/0x310
kthread+0xfc/0x240
ret_from_fork+0x243/0x280
ret_from_fork_asm+0x1a/0x30
</TASK>
On fuse this is problematic because there are paths that may cause the
flusher thread to block (eg if systemd freezes the user session cgroups
first, which freezes the fuse daemon, before invoking the kernel
suspend. The kernel suspend triggers ->write_node() which on fuse issues
a synchronous setattr request, which cannot be processed since the
daemon is frozen. Or if the daemon is buggy and cannot properly complete
writeback, initiating writeback on a dirty folio already under writeback
leads to writeback_get_folio() -> folio_prepare_writeback() ->
unconditional wait on writeback to finish, which will cause a hang).
This commit restores fuse to its prior behavior before tmp folios were
removed, where sync was essentially a no-op.
[1] https://lore.kernel.org/linux-fsdevel/CAJnrk1a-asuvfrbKXbEwwDSctvemF+6zfhdnuzO65Pt8HsFSRw@mail.gmail.com/T/#m632c4648e9cafc4239299887109ebd880ac6c5c1
Fixes: 0c58a97f919c ("fuse: remove tmp folio for writebacks and internal rb tree")
Reported-by: John <therealgraysky@proton.me>
Cc: stable@vger.kernel.org
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://patch.msgid.link/20260320005145.2483161-2-joannelkoong@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit cc34d77dd48708d810c12bfd6f5bf03304f6c824 ]
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
Also note that we do not enable the driver_override feature of struct
bus_type, as SPI - in contrast to most other buses - passes "" to
sysfs_emit() when the driver_override pointer is NULL. Thus, printing
"\n" instead of "(null)\n".
Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [1]
Reported-by: Gui-Dong Han <hanguidong02@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220789
Fixes: 5039563e7c25 ("spi: Add driver_override SPI device attribute")
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260324005919.2408620-12-dakr@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8f15b5071b4548b0aafc03b366eb45c9c6566704 ]
Replace manual range and mask validations with netlink policy
annotations in ctnetlink code paths, so that the netlink core rejects
invalid values early and can generate extack errors.
- CTA_PROTOINFO_TCP_STATE: reject values > TCP_CONNTRACK_SYN_SENT2 at
policy level, removing the manual >= TCP_CONNTRACK_MAX check.
- CTA_PROTOINFO_TCP_WSCALE_ORIGINAL/REPLY: reject values > TCP_MAX_WSCALE
(14). The normal TCP option parsing path already clamps to this value,
but the ctnetlink path accepted 0-255, causing undefined behavior when
used as a u32 shift count.
- CTA_FILTER_ORIG_FLAGS/REPLY_FLAGS: use NLA_POLICY_MASK with
CTA_FILTER_F_ALL, removing the manual mask checks.
- CTA_EXPECT_FLAGS: use NLA_POLICY_MASK with NF_CT_EXPECT_MASK, adding
a new mask define grouping all valid expect flags.
Extracted from a broader nf-next patch by Florian Westphal, scoped to
ctnetlink for the fixes tree.
Fixes: c8e2078cfe41 ("[NETFILTER]: ctnetlink: add support for internal tcp connection tracking flags handling")
Signed-off-by: David Carlier <devnexen@gmail.com>
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6c3ea155e5ee3e56606233acde8309afda66d483 ]
This attempts to proper track outstanding request by using struct ida
and allocating from it in l2cap_get_ident using ida_alloc_range which
would reuse ids as they are free, then upon completion release
the id using ida_free.
This fixes the qualification test case L2CAP/COS/CED/BI-29-C which
attempts to check if the host stack is able to work after 256 attempts
to connect which requires Ident field to use the full range of possible
values in order to pass the test.
Link: https://github.com/bluez/bluez/issues/1829
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Stable-dep-of: 00fdebbbc557 ("Bluetooth: L2CAP: Fix deadlock in l2cap_conn_del()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2cdaff22ed26f1e619aa2b43f27bb84f2c6ef8f8 ]
Under an UML build for an upcoming series [1], I got `-Wstatic-in-inline`
for `dma_free_attrs`:
BINDGEN rust/bindings/bindings_generated.rs - due to target missing
In file included from rust/helpers/helpers.c:59:
rust/helpers/dma.c:17:2: warning: static function 'dma_free_attrs' is used in an inline function with external linkage [-Wstatic-in-inline]
17 | dma_free_attrs(dev, size, cpu_addr, dma_handle, attrs);
| ^
rust/helpers/dma.c:12:1: note: use 'static' to give inline function 'rust_helper_dma_free_attrs' internal linkage
12 | __rust_helper void rust_helper_dma_free_attrs(struct device *dev, size_t size,
| ^
| static
The issue is that `dma_free_attrs` was not marked `inline` when it was
introduced alongside the rest of the stubs.
Thus mark it.
Fixes: ed6ccf10f24b ("dma-mapping: properly stub out the DMA API for !CONFIG_HAS_DMA")
Closes: https://lore.kernel.org/rust-for-linux/20260322194616.89847-1-ojeda@kernel.org/ [1]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260325015548.70912-1-ojeda@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6c860dc02a8e60b438e26940227dfa641fcdb66a ]
The commit a2fb4bc4e2a6a03 ("net: implement virtio helpers to handle UDP
GSO tunneling.") introduces support for the UDP GSO tunnel feature in
virtio-net.
The virtio spec says:
If the \field{gso_type} has the VIRTIO_NET_HDR_GSO_UDP_TUNNEL_IPV4 bit or
VIRTIO_NET_HDR_GSO_UDP_TUNNEL_IPV6 bit set, \field{hdr_len} accounts for
all the headers up to and including the inner transport.
The commit did not update the hdr_len to include the inner transport.
I observed that the "hdr_len" is 116 for this packet:
17:36:18.241105 52:55:00:d1:27:0a > 2e:2c:df:46:a9:e1, ethertype IPv4 (0x0800), length 2912: (tos 0x0, ttl 64, id 45197, offset 0, flags [none], proto UDP (17), length 2898)
192.168.122.100.50613 > 192.168.122.1.4789: [bad udp cksum 0x8106 -> 0x26a0!] VXLAN, flags [I] (0x08), vni 1
fa:c3:ba:82:05:ee > ce:85:0c:31:77:e5, ethertype IPv4 (0x0800), length 2862: (tos 0x0, ttl 64, id 14678, offset 0, flags [DF], proto TCP (6), length 2848)
192.168.3.1.49880 > 192.168.3.2.9898: Flags [P.], cksum 0x9266 (incorrect -> 0xaa20), seq 515667:518463, ack 1, win 64, options [nop,nop,TS val 2990048824 ecr 2798801412], length 2796
116 = 14(mac) + 20(ip) + 8(udp) + 8(vxlan) + 14(inner mac) + 20(inner ip) + 32(innner tcp)
Fixes: a2fb4bc4e2a6a03 ("net: implement virtio helpers to handle UDP GSO tunneling.")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20260320021818.111741-3-xuanzhuo@linux.alibaba.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 38ec410b99a5ee6566f75650ce3d4fd632940fd0 ]
The commit be50da3e9d4a ("net: virtio_net: implement exact header length
guest feature") introduces support for the VIRTIO_NET_F_GUEST_HDRLEN
feature in virtio-net.
This feature requires virtio-net to set hdr_len to the actual header
length of the packet when transmitting, the number of
bytes from the start of the packet to the beginning of the
transport-layer payload.
However, in practice, hdr_len was being set using skb_headlen(skb),
which is clearly incorrect. This commit fixes that issue.
Fixes: be50da3e9d4a ("net: virtio_net: implement exact header length guest feature")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20260320021818.111741-2-xuanzhuo@linux.alibaba.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e537dd15d0d4ad989d56a1021290f0c674dd8b28 ]
When binding a udp_sock to a local address and port, UDP uses
two hashes (udptable->hash and udptable->hash2) for collision
detection. The current code switches to "hash2" when
hslot->count > 10.
"hash2" is keyed by local address and local port.
"hash" is keyed by local port only.
The issue can be shown in the following bind sequence (pseudo code):
bind(fd1, "[fd00::1]:8888")
bind(fd2, "[fd00::2]:8888")
bind(fd3, "[fd00::3]:8888")
bind(fd4, "[fd00::4]:8888")
bind(fd5, "[fd00::5]:8888")
bind(fd6, "[fd00::6]:8888")
bind(fd7, "[fd00::7]:8888")
bind(fd8, "[fd00::8]:8888")
bind(fd9, "[fd00::9]:8888")
bind(fd10, "[fd00::10]:8888")
/* Correctly return -EADDRINUSE because "hash" is used
* instead of "hash2". udp_lib_lport_inuse() detects the
* conflict.
*/
bind(fail_fd, "[::]:8888")
/* After one more socket is bound to "[fd00::11]:8888",
* hslot->count exceeds 10 and "hash2" is used instead.
*/
bind(fd11, "[fd00::11]:8888")
bind(fail_fd, "[::]:8888") /* succeeds unexpectedly */
The same issue applies to the IPv4 wildcard address "0.0.0.0"
and the IPv4-mapped wildcard address "::ffff:0.0.0.0". For
example, if there are existing sockets bound to
"192.168.1.[1-11]:8888", then binding "0.0.0.0:8888" or
"[::ffff:0.0.0.0]:8888" can also miss the conflict when
hslot->count > 10.
TCP inet_csk_get_port() already has the correct check in
inet_use_bhash2_on_bind(). Rename it to
inet_use_hash2_on_bind() and move it to inet_hashtables.h
so udp.c can reuse it in this fix.
Fixes: 30fff9231fad ("udp: bind() optimisation")
Reported-by: Andrew Onyshchuk <oandrew@meta.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260319181817.1901357-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4be7b99c253f0c85a255cc1db7127ba3232dfa30 ]
The cited commit mechanically put fib6_remove_gc_list()
just after every fib6_clean_expires() call.
When a temporary route is promoted to a permanent route,
there may already be exception routes tied to it.
If fib6_remove_gc_list() removes the route from tb6_gc_hlist,
such exception routes will no longer be aged.
Let's replace fib6_remove_gc_list() with a new helper
fib6_may_remove_gc_list() and use fib6_age_exceptions() there.
Note that net->ipv6 is only compiled when CONFIG_IPV6 is
enabled, so fib6_{add,remove,may_remove}_gc_list() are guarded.
Fixes: 5eb902b8e719 ("net/ipv6: Remove expired routes with a separated list of routes.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260320072317.2561779-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9f6a983cfa22ac662c86e60816d3a357d4b551e9 ]
Some USB devices incorrectly report bNumConfigurations as 0 in their
device descriptor, which causes the USB core to reject them during
enumeration.
logs:
usb 1-2: device descriptor read/64, error -71
usb 1-2: no configurations
usb 1-2: can't read configurations, error -22
However, these devices actually work correctly when
treated as having a single configuration.
Add a new quirk USB_QUIRK_FORCE_ONE_CONFIG to handle such devices.
When this quirk is set, assume the device has 1 configuration instead
of failing with -EINVAL.
This quirk is applied to the device with VID:PID 5131:2007 which
exhibits this behavior.
Signed-off-by: Jie Deng <dengjie03@kylinos.cn>
Link: https://patch.msgid.link/20260227084931.1527461-1-dengjie03@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a116bac87118903925108e57781bbfc7a7eea27b ]
include/uapi/linux/dma-buf.h uses several macros from ioctl.h to define
its ioctl commands. However, it does not include ioctl.h itself. So,
if userspace source code tries to include the dma-buf.h file without
including ioctl.h, it can result in build failures.
Therefore, include ioctl.h in the dma-buf UAPI header.
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20260303002309.1401849-1-isaacmanjarres@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9351cf3fd92dc1349bb75f2f7f7324607dcf596f ]
Move the ASP register patches to a separate struct and apply this from the
ASP DAI probe() function so that the registers are only patched if the DAI
is part of a DAI link.
Some systems use the ASP as a special-purpose interconnect and on these
systems the ASP registers are configured by a third party (the firmware,
the BIOS, or another device using the amp's secondary host control
interface).
If the machine driver does not hook up the ASP DAI then the ASP registers
must be omitted from the patch to prevent overwriting the third party
configuration.
If the machine driver includes the ASP DAI in a DAI link, this implies that
the machine driver and higher components (such as alsa-ucm) are taking
ownership of the ASP. In this case the ASP registers are patched to known
defaults and the machine driver should configure the ASP.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260226110137.1664562-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 15fba71533bcdfaa8eeba69a5a5a2927afdf664a ]
The TRENDnet TUC-ET2G is a RTL8156 based usb ethernet adapter. Add its
vendor and product IDs.
Signed-off-by: Valentin Spreckels <valentin@spreckels.dev>
Link: https://patch.msgid.link/20260226195409.7891-2-valentin@spreckels.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a6f22e50c7d51aa225c392c62c33f0fae11f734d ]
This reverts commit e3f6a42272e028c46695acc83fc7d7c42f2750ad.
The commit says that the tracepoint only deals with the current task,
however the following case is not current task:
comm_write() {
p = get_proc_task(inode);
if (!p)
return -ESRCH;
if (same_thread_group(current, p))
set_task_comm(p, buffer);
}
where set_task_comm() calls __set_task_comm() which records
the update of p and not current.
So revert the patch to show pid.
Cc: <mhiramat@kernel.org>
Cc: <mathieu.desnoyers@efficios.com>
Cc: <elver@google.com>
Cc: <kees@kernel.org>
Link: https://patch.msgid.link/20260306075954.4533-1-xuewen.yan@unisoc.com
Fixes: e3f6a42272e0 ("tracing: Remove pid in task_rename tracing output")
Reported-by: Guohua Yan <guohua.yan@unisoc.com>
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2b38efc05bf7a8568ec74bfffea0f5cfa62bc01d ]
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [1]
Reported-by: Gui-Dong Han <hanguidong02@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220789
Fixes: 3d713e0e382e ("driver core: platform: add device binding path 'driver_override'")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260303115720.48783-5-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cb3d1049f4ea77d5ad93f17d8ac1f2ed4da70501 ]
Currently, there are 12 busses (including platform and PCI) that
duplicate the driver_override logic for their individual devices.
All of them seem to be prone to the bug described in [1].
While this could be solved for every bus individually using a separate
lock, solving this in the driver-core generically results in less (and
cleaner) changes overall.
Thus, move driver_override to struct device, provide corresponding
accessors for busses and handle locking with a separate lock internally.
In particular, add device_set_driver_override(),
device_has_driver_override(), device_match_driver_override() and
generalize the sysfs store() and show() callbacks via a driver_override
feature flag in struct bus_type.
Until all busses have migrated, keep driver_set_override() in place.
Note that we can't use the device lock for the reasons described in [2].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220789 [1]
Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [2]
Tested-by: Gui-Dong Han <hanguidong02@gmail.com>
Co-developed-by: Gui-Dong Han <hanguidong02@gmail.com>
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260303115720.48783-2-dakr@kernel.org
[ Use dev->bus instead of sp->bus for consistency; fix commit message to
refer to the struct bus_type's driver_override feature flag. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Stable-dep-of: 2b38efc05bf7 ("driver core: platform: use generic driver_override infrastructure")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 1613462be621ad5103ec338a7b0ca0746ec4e5f1 upstream.
When running in an unprivileged domU under Xen, the privcmd driver
is restricted to allow only hypercalls against a target domain, for
which the current domU is acting as a device model.
Add a boot parameter "unrestricted" to allow all hypercalls (the
hypervisor will still refuse destructive hypercalls affecting other
guests).
Make this new parameter effective only in case the domU wasn't started
using secure boot, as otherwise hypercalls targeting the domU itself
might result in violating the secure boot functionality.
This is achieved by adding another lockdown reason, which can be
tested to not being set when applying the "unrestricted" option.
This is part of XSA-482
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4ced4cf5c9d172d91f181df3accdf949d3761aab ]
Commit 4e6e8c2b757f ("binfmt_elf: Wire up AT_HWCAP3 at AT_HWCAP4") added
support for AT_HWCAP3 and AT_HWCAP4, but it missed updating the AUX
vector size calculation in create_elf_fdpic_tables() and
AT_VECTOR_SIZE_BASE in include/linux/auxvec.h.
Similar to the fix for AT_HWCAP2 in commit c6a09e342f8e ("binfmt_elf_fdpic:
fix AUXV size calculation when ELF_HWCAP2 is defined"), this omission
leads to a mismatch between the reserved space and the actual number of
AUX entries, eventually triggering a kernel BUG_ON(csp != sp).
Fix this by incrementing nitems when ELF_HWCAP3 or ELF_HWCAP4 are
defined and updating AT_VECTOR_SIZE_BASE.
Cc: Mark Brown <broonie@kernel.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@futurfusion.io>
Fixes: 4e6e8c2b757f ("binfmt_elf: Wire up AT_HWCAP3 at AT_HWCAP4")
Signed-off-by: Andrei Vagin <avagin@google.com>
Link: https://patch.msgid.link/20260217180108.1420024-2-avagin@google.com
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b3a6df291fecf5f8a308953b65ca72b7fc9e015d ]
When CONFIG_IPV6 is disabled, the udp_sock_create6() function returns 0
(success) without actually creating a socket. Callers such as
fou_create() then proceed to dereference the uninitialized socket
pointer, resulting in a NULL pointer dereference.
The captured NULL deref crash:
BUG: kernel NULL pointer dereference, address: 0000000000000018
RIP: 0010:fou_nl_add_doit (net/ipv4/fou_core.c:590 net/ipv4/fou_core.c:764)
[...]
Call Trace:
<TASK>
genl_family_rcv_msg_doit.constprop.0 (net/netlink/genetlink.c:1114)
genl_rcv_msg (net/netlink/genetlink.c:1194 net/netlink/genetlink.c:1209)
[...]
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
genl_rcv (net/netlink/genetlink.c:1219)
netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sock_sendmsg (net/socket.c:727 (discriminator 1) net/socket.c:742 (discriminator 1))
__sys_sendto (./include/linux/file.h:62 (discriminator 1) ./include/linux/file.h:83 (discriminator 1) net/socket.c:2183 (discriminator 1))
__x64_sys_sendto (net/socket.c:2213 (discriminator 1) net/socket.c:2209 (discriminator 1) net/socket.c:2209 (discriminator 1))
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (net/arch/x86/entry/entry_64.S:130)
This patch makes udp_sock_create6 return -EPFNOSUPPORT instead, so
callers correctly take their error paths. There is only one caller of
the vulnerable function and only privileged users can trigger it.
Fixes: fd384412e199b ("udp_tunnel: Seperate ipv6 functions into its own file.")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260317010241.1893893-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d5ad6ab61cbd89afdb60881f6274f74328af3ee9 ]
ieee80211_tx_prepare_skb() has three error paths, but only two of them
free the skb. The first error path (ieee80211_tx_prepare() returning
TX_DROP) does not free it, while invoke_tx_handlers() failure and the
fragmentation check both do.
Add kfree_skb() to the first error path so all three are consistent,
and remove the now-redundant frees in callers (ath9k, mt76,
mac80211_hwsim) to avoid double-free.
Document the skb ownership guarantee in the function's kdoc.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20260314065455.2462900-1-nbd@nbd.name
Fixes: 06be6b149f7e ("mac80211: add ieee80211_tx_prepare_skb() helper function")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a0671125d4f55e1e98d9bde8a0b671941987e208 ]
Fix a use-after-free in the clsact qdisc upon init/destroy rollback asymmetry.
The latter is achieved by first fully initializing a clsact instance, and
then in a second step having a replacement failure for the new clsact qdisc
instance. clsact_init() initializes ingress first and then takes care of the
egress part. This can fail midway, for example, via tcf_block_get_ext(). Upon
failure, the kernel will trigger the clsact_destroy() callback.
Commit 1cb6f0bae504 ("bpf: Fix too early release of tcx_entry") details the
way how the transition is happening. If tcf_block_get_ext on the q->ingress_block
ends up failing, we took the tcx_miniq_inc reference count on the ingress
side, but not yet on the egress side. clsact_destroy() tests whether the
{ingress,egress}_entry was non-NULL. However, even in midway failure on the
replacement, both are in fact non-NULL with a valid egress_entry from the
previous clsact instance.
What we really need to test for is whether the qdisc instance-specific ingress
or egress side previously got initialized. This adds a small helper for checking
the miniq initialization called mini_qdisc_pair_inited, and utilizes that upon
clsact_destroy() in order to fix the use-after-free scenario. Convert the
ingress_destroy() side as well so both are consistent to each other.
Fixes: 1cb6f0bae504 ("bpf: Fix too early release of tcx_entry")
Reported-by: Keenan Dong <keenanat2000@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260313065531.98639-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 66360460cab63c248ca5b1070a01c0c29133b960 ]
Whenever a TEQL devices has a lockless Qdisc as root, qdisc_reset should
be called using the seq_lock to avoid racing with the datapath. Failure
to do so may cause crashes like the following:
[ 238.028993][ T318] BUG: KASAN: double-free in skb_release_data (net/core/skbuff.c:1139)
[ 238.029328][ T318] Free of addr ffff88810c67ec00 by task poc_teql_uaf_ke/318
[ 238.029749][ T318]
[ 238.029900][ T318] CPU: 3 UID: 0 PID: 318 Comm: poc_teql_ke Not tainted 7.0.0-rc3-00149-ge5b31d988a41 #704 PREEMPT(full)
[ 238.029906][ T318] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 238.029910][ T318] Call Trace:
[ 238.029913][ T318] <TASK>
[ 238.029916][ T318] dump_stack_lvl (lib/dump_stack.c:122)
[ 238.029928][ T318] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
[ 238.029940][ T318] ? skb_release_data (net/core/skbuff.c:1139)
[ 238.029944][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
...
[ 238.029957][ T318] ? skb_release_data (net/core/skbuff.c:1139)
[ 238.029969][ T318] kasan_report_invalid_free (mm/kasan/report.c:221 mm/kasan/report.c:563)
[ 238.029979][ T318] ? skb_release_data (net/core/skbuff.c:1139)
[ 238.029989][ T318] check_slab_allocation (mm/kasan/common.c:231)
[ 238.029995][ T318] kmem_cache_free (mm/slub.c:2637 (discriminator 1) mm/slub.c:6168 (discriminator 1) mm/slub.c:6298 (discriminator 1))
[ 238.030004][ T318] skb_release_data (net/core/skbuff.c:1139)
...
[ 238.030025][ T318] sk_skb_reason_drop (net/core/skbuff.c:1256)
[ 238.030032][ T318] pfifo_fast_reset (./include/linux/ptr_ring.h:171 ./include/linux/ptr_ring.h:309 ./include/linux/skb_array.h:98 net/sched/sch_generic.c:827)
[ 238.030039][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
...
[ 238.030054][ T318] qdisc_reset (net/sched/sch_generic.c:1034)
[ 238.030062][ T318] teql_destroy (./include/linux/spinlock.h:395 net/sched/sch_teql.c:157)
[ 238.030071][ T318] __qdisc_destroy (./include/net/pkt_sched.h:328 net/sched/sch_generic.c:1077)
[ 238.030077][ T318] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159)
[ 238.030089][ T318] ? __pfx_qdisc_graft (net/sched/sch_api.c:1091)
[ 238.030095][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 238.030102][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 238.030106][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 238.030114][ T318] tc_get_qdisc (net/sched/sch_api.c:1529 net/sched/sch_api.c:1556)
...
[ 238.072958][ T318] Allocated by task 303 on cpu 5 at 238.026275s:
[ 238.073392][ T318] kasan_save_stack (mm/kasan/common.c:58)
[ 238.073884][ T318] kasan_save_track (mm/kasan/common.c:64 (discriminator 5) mm/kasan/common.c:79 (discriminator 5))
[ 238.074230][ T318] __kasan_slab_alloc (mm/kasan/common.c:369)
[ 238.074578][ T318] kmem_cache_alloc_node_noprof (./include/linux/kasan.h:253 mm/slub.c:4542 mm/slub.c:4869 mm/slub.c:4921)
[ 238.076091][ T318] kmalloc_reserve (net/core/skbuff.c:616 (discriminator 107))
[ 238.076450][ T318] __alloc_skb (net/core/skbuff.c:713)
[ 238.076834][ T318] alloc_skb_with_frags (./include/linux/skbuff.h:1383 net/core/skbuff.c:6763)
[ 238.077178][ T318] sock_alloc_send_pskb (net/core/sock.c:2997)
[ 238.077520][ T318] packet_sendmsg (net/packet/af_packet.c:2926 net/packet/af_packet.c:3019 net/packet/af_packet.c:3108)
[ 238.081469][ T318]
[ 238.081870][ T318] Freed by task 299 on cpu 1 at 238.028496s:
[ 238.082761][ T318] kasan_save_stack (mm/kasan/common.c:58)
[ 238.083481][ T318] kasan_save_track (mm/kasan/common.c:64 (discriminator 5) mm/kasan/common.c:79 (discriminator 5))
[ 238.085348][ T318] kasan_save_free_info (mm/kasan/generic.c:587 (discriminator 1))
[ 238.085900][ T318] __kasan_slab_free (mm/kasan/common.c:287)
[ 238.086439][ T318] kmem_cache_free (mm/slub.c:6168 (discriminator 3) mm/slub.c:6298 (discriminator 3))
[ 238.087007][ T318] skb_release_data (net/core/skbuff.c:1139)
[ 238.087491][ T318] consume_skb (net/core/skbuff.c:1451)
[ 238.087757][ T318] teql_master_xmit (net/sched/sch_teql.c:358)
[ 238.088116][ T318] dev_hard_start_xmit (./include/linux/netdevice.h:5324 ./include/linux/netdevice.h:5333 net/core/dev.c:3871 net/core/dev.c:3887)
[ 238.088468][ T318] sch_direct_xmit (net/sched/sch_generic.c:347)
[ 238.088820][ T318] __qdisc_run (net/sched/sch_generic.c:420 (discriminator 1))
[ 238.089166][ T318] __dev_queue_xmit (./include/net/sch_generic.h:229 ./include/net/pkt_sched.h:121 ./include/net/pkt_sched.h:117 net/core/dev.c:4196 net/core/dev.c:4802)
Workflow to reproduce:
1. Initialize a TEQL topology (dummy0 and ifb0 as slaves, teql0 up).
2. Start multiple sender workers continuously transmitting packets
through teql0 to drive teql_master_xmit().
3. In parallel, repeatedly delete and re-add the root qdisc on
dummy0 and ifb0 via RTNETLINK, forcing frequent teardown and reset activity
(teql_destroy() / qdisc_reset()).
4. After running both workloads concurrently for several iterations,
KASAN reports slab-use-after-free or double-free in the skb free path.
Fix this by moving dev_reset_queue to sch_generic.h and calling it, instead
of qdisc_reset, in teql_destroy since it handles both the lock and lockless
cases correctly for root qdiscs.
Fixes: 96009c7d500e ("sched: replace __QDISC_STATE_RUNNING bit with a spin lock")
Reported-by: Xianrui Dong <keenanat2000@gmail.com>
Tested-by: Xianrui Dong <keenanat2000@gmail.com>
Co-developed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260315155422.147256-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b7405dcf7385445e10821777143f18c3ce20fa04 ]
bond_header_parse() can loop if a stack of two bonding devices is setup,
because skb->dev always points to the hierarchy top.
Add new "const struct net_device *dev" parameter to
(struct header_ops)->parse() method to make sure the recursion
is bounded, and that the final leaf parse method is called.
Fixes: 950803f72547 ("bonding: fix type confusion in bond_setup_by_slave()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Tested-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Link: https://patch.msgid.link/20260315104152.1436867-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0548a13b5a145b16e4da0628b5936baf35f51b43 ]
If cloning the second stateful expression in the element via GFP_ATOMIC
fails, then the first stateful expression remains in place without being
released.
unreferenced object (percpu) 0x607b97e9cab8 (size 16):
comm "softirq", pid 0, jiffies 4294931867
hex dump (first 16 bytes on cpu 3):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
backtrace (crc 0):
pcpu_alloc_noprof+0x453/0xd80
nft_counter_clone+0x9c/0x190 [nf_tables]
nft_expr_clone+0x8f/0x1b0 [nf_tables]
nft_dynset_new+0x2cb/0x5f0 [nf_tables]
nft_rhash_update+0x236/0x11c0 [nf_tables]
nft_dynset_eval+0x11f/0x670 [nf_tables]
nft_do_chain+0x253/0x1700 [nf_tables]
nft_do_chain_ipv4+0x18d/0x270 [nf_tables]
nf_hook_slow+0xaa/0x1e0
ip_local_deliver+0x209/0x330
Fixes: 563125a73ac3 ("netfilter: nftables: generalize set extension to support for several expressions")
Reported-by: Gurpreet Shergill <giki.shergill@proton.me>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 8324a54f604da18f21070702a8ad82ab2062787b upstream.
8250_port exports serial8250_handle_irq() to HW specific 8250 drivers.
It takes port's lock within but a HW specific 8250 driver may want to
take port's lock itself, do something, and then call the generic
handler in 8250_port but to do that, the caller has to release port's
lock for no good reason.
Introduce serial8250_handle_irq_locked() which a HW specific driver can
call while already holding port's lock.
As this is new export, put it straight into a namespace (where all 8250
exports should eventually be moved).
Tested-by: Bandal, Shankar <shankar.bandal@intel.com>
Tested-by: Murthy, Shanth <shanth.murthy@intel.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260203171049.4353-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5eb608319bb56464674a71b4a66ea65c6c435d64 upstream.
The alternate screen support added by commit 23743ba64709 ("vt: add
support for smput/rmput escape codes") only saves and restores the
regular screen buffer (vc_origin), but completely ignores the corresponding
unicode screen buffer (vc_uni_lines) creating a messed-up display.
Add vc_saved_uni_lines to save the unicode screen buffer when entering
the alternate screen, and restore it when leaving. Also ensure proper
cleanup in reset_terminal() and vc_deallocate().
Fixes: 23743ba64709 ("vt: add support for smput/rmput escape codes")
Cc: stable <stable@kernel.org>
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://patch.msgid.link/5o2p6qp3-91pq-0p17-or02-1oors4417ns7@onlyvoer.pbz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
