| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 3f0cb8de56b9a5c052a9e43fa548856926059810 ]
io_req_complete_post() doesn't handle reissue and if called with a
REQ_F_REISSUE request it might post extra unexpected completions. Fix it
by pushing into flush_completion via task work.
Fixes: d803d123948fe ("io_uring/rw: handle -EAGAIN retry at IO completion time")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/badb3d7e462881e7edbfcc2be6301090b07dbe53.1742829388.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 62aa9805d123165102273eb277f776aaca908e0e ]
io_uring_create() computes ctx->lockless_cq as:
ctx->task_complete || (ctx->flags & IORING_SETUP_IOPOLL)
So use it to simplify that expression in io_req_complete_post().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20250212005119.3433005-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 3f0cb8de56b9 ("io_uring: fix retry handling off iowq")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8e3100fcc5cbba03518b8b5c059624aba5c29d50 ]
io_send_zc() guards its call to io_send_zc_import() with if (!done_io)
in an attempt to avoid calling it redundantly on the same req. However,
if the initial non-blocking issue returns -EAGAIN, done_io will stay 0.
This causes the subsequent issue to unnecessarily re-import the buffer.
Add an explicit flag "imported" to io_sr_msg to track if its buffer has
already been imported. Clear the flag in io_send_zc_prep(). Call
io_send_zc_import() and set the flag in io_send_zc() if it is unset.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 54cdcca05abd ("io_uring/net: switch io_send() and io_send_zc() to using io_async_msghdr")
Link: https://lore.kernel.org/r/20250321184819.3847386-2-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7c71a0af81ba72de9b2c501065e4e718aba9a271 ]
Current recv bundles are only supported for multishot receives, and
additionally they also always post at least 2 CQEs if more data is
available than what a buffer will hold. This happens because the initial
bundle recv will do a single buffer, and then do the rest of what is in
the socket as a followup receive. As shown in a test program, if 1k
buffers are available and 32k is available to receive in the socket,
you'd get the following completions:
bundle=1, mshot=0
cqe res 1024
cqe res 1024
[...]
cqe res 1024
bundle=1, mshot=1
cqe res 1024
cqe res 31744
where bundle=1 && mshot=0 will post 32 1k completions, and bundle=1 &&
mshot=1 will post a 1k completion and then a 31k completion.
To support bundle recv without multishot, it's possible to simply retry
the recv immediately and post a single completion, rather than split it
into two completions. With the below patch, the same test looks as
follows:
bundle=1, mshot=0
cqe res 32768
bundle=1, mshot=1
cqe res 32768
where mshot=0 works fine for bundles, and both of them post just a
single 32k completion rather than split it into separate completions.
Posting fewer completions is always a nice win, and not needing
multishot for proper bundle efficiency is nice for cases that can't
necessarily use multishot.
Reported-by: Norman Maurer <norman_maurer@apple.com>
Link: https://lore.kernel.org/r/184f9f92-a682-4205-a15d-89e18f664502@kernel.dk
Fixes: 2f9c9515bdfd ("io_uring/net: support bundles for recv")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7215469659cb9751a9bf80e43b24a48749004d26 ]
alloc_workqueue() can fail even during init in io_uring_init(), check
the result and panic if anything went wrong.
Fixes: 73eaa2b583493 ("io_uring: use private workqueue for exit work")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/3a046063902f888f66151f89fa42f84063b9727b.1738343083.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 486ba4d84d62e92716cd395c4b1612b8ce70a257 ]
Previously, the `hash` variable was initialized with `-1` and only
updated by io_get_next_work() if the current work was hashed. Commit
60cf46ae6054 ("io-wq: hash dependent work") changed this to always
call io_get_work_hash() even if the work was not hashed. This caused
the `hash != -1U` check to always be true, adding some overhead for
the `hash->wait` code.
This patch fixes the regression by checking the `IO_WQ_WORK_HASHED`
flag.
Perf diff for a flood of `IORING_OP_NOP` with `IOSQE_ASYNC`:
38.55% -1.57% [kernel.kallsyms] [k] queued_spin_lock_slowpath
6.86% -0.72% [kernel.kallsyms] [k] io_worker_handle_work
0.10% +0.67% [kernel.kallsyms] [k] put_prev_entity
1.96% +0.59% [kernel.kallsyms] [k] io_nop_prep
3.31% -0.51% [kernel.kallsyms] [k] try_to_wake_up
7.18% -0.47% [kernel.kallsyms] [k] io_wq_free_work
Fixes: 60cf46ae6054 ("io-wq: hash dependent work")
Cc: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/r/20250128133927.3989681-6-max.kellermann@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6ee78354eaa602002448f098b34678396d99043d ]
This eliminates several redundant atomic reads and therefore reduces
the duration the surrounding spinlocks are held.
In several io_uring benchmarks, this reduced the CPU time spent in
queued_spin_lock_slowpath() considerably:
io_uring benchmark with a flood of `IORING_OP_NOP` and `IOSQE_ASYNC`:
38.86% -1.49% [kernel.kallsyms] [k] queued_spin_lock_slowpath
6.75% +0.36% [kernel.kallsyms] [k] io_worker_handle_work
2.60% +0.19% [kernel.kallsyms] [k] io_nop
3.92% +0.18% [kernel.kallsyms] [k] io_req_task_complete
6.34% -0.18% [kernel.kallsyms] [k] io_wq_submit_work
HTTP server, static file:
42.79% -2.77% [kernel.kallsyms] [k] queued_spin_lock_slowpath
2.08% +0.23% [kernel.kallsyms] [k] io_wq_submit_work
1.19% +0.20% [kernel.kallsyms] [k] amd_iommu_iotlb_sync_map
1.46% +0.15% [kernel.kallsyms] [k] ep_poll_callback
1.80% +0.15% [kernel.kallsyms] [k] io_worker_handle_work
HTTP server, PHP:
35.03% -1.80% [kernel.kallsyms] [k] queued_spin_lock_slowpath
0.84% +0.21% [kernel.kallsyms] [k] amd_iommu_iotlb_sync_map
1.39% +0.12% [kernel.kallsyms] [k] _copy_to_iter
0.21% +0.10% [kernel.kallsyms] [k] update_sd_lb_stats
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/r/20250128133927.3989681-5-max.kellermann@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 486ba4d84d62 ("io_uring/io-wq: do not use bogus hash value")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3c75635f8ed482300931327847c50068a865a648 ]
Instead of calling io_work_get_acct() again, pass acct to
io_wq_insert_work() and io_wq_remove_pending().
This atomic access in io_work_get_acct() was done under the
`acct->lock`, and optimizing it away reduces lock contention a bit.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/r/20250128133927.3989681-2-max.kellermann@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 486ba4d84d62 ("io_uring/io-wq: do not use bogus hash value")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Pull io_uring fix from Jens Axboe:
"Just a single fix for the commit that went into your tree yesterday,
which exposed an issue with not always clearing notifications. That
could cause them to be used more than once"
* tag 'io_uring-6.14-20250322' of git://git.kernel.dk/linux:
io_uring/net: fix sendzc double notif flush
|
|
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 5823 at lib/refcount.c:28 refcount_warn_saturate+0x15a/0x1d0 lib/refcount.c:28
RIP: 0010:refcount_warn_saturate+0x15a/0x1d0 lib/refcount.c:28
Call Trace:
<TASK>
io_notif_flush io_uring/notif.h:40 [inline]
io_send_zc_cleanup+0x121/0x170 io_uring/net.c:1222
io_clean_op+0x58c/0x9a0 io_uring/io_uring.c:406
io_free_batch_list io_uring/io_uring.c:1429 [inline]
__io_submit_flush_completions+0xc16/0xd20 io_uring/io_uring.c:1470
io_submit_flush_completions io_uring/io_uring.h:159 [inline]
Before the blamed commit, sendzc relied on io_req_msg_cleanup() to clear
REQ_F_NEED_CLEANUP, so after the following snippet the request will
never hit the core io_uring cleanup path.
io_notif_flush();
io_req_msg_cleanup();
The easiest fix is to null the notification. io_send_zc_cleanup() can
still be called after, but it's tolerated.
Reported-by: syzbot+cf285a028ffba71b2ef5@syzkaller.appspotmail.com
Tested-by: syzbot+cf285a028ffba71b2ef5@syzkaller.appspotmail.com
Fixes: cc34d8330e036 ("io_uring/net: don't clear REQ_F_NEED_CLEANUP unconditionally")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e1306007458b8891c88c4f20c966a17595f766b0.1742643795.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull io_uring fix from Jens Axboe:
"Single fix heading to stable, fixing an issue with io_req_msg_cleanup()
sometimes too eagerly clearing cleanup flags"
* tag 'io_uring-6.14-20250321' of git://git.kernel.dk/linux:
io_uring/net: don't clear REQ_F_NEED_CLEANUP unconditionally
|
|
io_req_msg_cleanup() relies on the fact that io_netmsg_recycle() will
always fully recycle, but that may not be the case if the msg cache
was already full. To ensure that normal cleanup always gets run,
let io_netmsg_recycle() deal with clearing the relevant cleanup flags,
as it knows exactly when that should be done.
Cc: stable@vger.kernel.org
Reported-by: David Wei <dw@davidwei.uk>
Fixes: 75191341785e ("io_uring/net: add iovec recycling")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull io_uring fix from Jens Axboe:
"A single fix for a regression introduced in the 6.14 merge window,
causing stalls/hangs with IOPOLL reads or writes"
* tag 'io_uring-6.14-20250306' of git://git.kernel.dk/linux:
io_uring/rw: ensure reissue path is correctly handled for IOPOLL
|
|
The IOPOLL path posts CQEs when the io_kiocb is marked as completed,
so it cannot rely on the usual retry that non-IOPOLL requests do for
read/write requests.
If -EAGAIN is received and the request should be retried, go through
the normal completion path and let the normal flush logic catch it and
reissue it, like what is done for !IOPOLL reads or writes.
Fixes: d803d123948f ("io_uring/rw: handle -EAGAIN retry at IO completion time")
Reported-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/io-uring/2b43ccfa-644d-4a09-8f8f-39ad71810f41@oracle.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull io_uring fix from Jens Axboe:
"Just a single fix headed for stable, ensuring that msg_control is
properly saved in compat mode as well"
* tag 'io_uring-6.14-20250228' of git://git.kernel.dk/linux:
io_uring/net: save msg_control for compat
|
|
Match the compat part of io_sendmsg_copy_hdr() with its counterpart and
save msg_control.
Fixes: c55978024d123 ("io_uring/net: move receive multishot out of the generic msghdr path")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2a8418821fe83d3b64350ad2b3c0303e9b732bbd.1740498502.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull io_uring fixes from Jens Axboe:
- Series fixing an issue with multishot read on pollable files that may
return -EIOCBQUEUED from ->read_iter(). Four small patches for that,
the first one deliberately done in such a way that it'd be easy to
backport
- Remove some dead constant definitions
- Use array_index_nospec() for opcode indexing
- Work-around for worker creation retries in the presence of signals
* tag 'io_uring-6.14-20250221' of git://git.kernel.dk/linux:
io_uring/rw: clean up mshot forced sync mode
io_uring/rw: move ki_complete init into prep
io_uring/rw: don't directly use ki_complete
io_uring/rw: forbid multishot async reads
io_uring/rsrc: remove unused constants
io_uring: fix spelling error in uapi io_uring.h
io_uring: prevent opcode speculation
io-wq: backoff when retrying worker creation
|
|
Move code forcing synchronous execution of multishot read requests out
a more generic __io_read().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4ad7b928c776d1ad59addb9fff64ef2d1fc474d5.1739919038.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Initialise ki_complete during request prep stage, we'll depend on it not
being reset during issue in the following patch.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/817624086bd5f0448b08c80623399919fda82f34.1739919038.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We want to avoid checking ->ki_complete directly in the io_uring
completion path. Fortunately we have only two callback the selection
of which depend on the ring constant flags, i.e. IOPOLL, so use that
to infer the function.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4eb4bdab8cbcf5bc87083f7047edc81e920ab83c.1739919038.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
At the moment we can't sanely handle queuing an async request from a
multishot context, so disable them. It shouldn't matter as pollable
files / socekts don't normally do async.
Patching it in __io_read() is not the cleanest way, but it's simpler
than other options, so let's fix it there and clean up on top.
Cc: stable@vger.kernel.org
Reported-by: chase xd <sl1589472800@gmail.com>
Fixes: fc68fcda04910 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7d51732c125159d17db4fe16f51ec41b936973f8.1739919038.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
IO_NODE_ALLOC_CACHE_MAX has been unused since commit fbbb8e991d86
("io_uring/rsrc: get rid of io_rsrc_node allocation cache") removed the
rsrc_node_cache.
IO_RSRC_TAG_TABLE_SHIFT and IO_RSRC_TAG_TABLE_MASK have been unused
since commit 7029acd8a950 ("io_uring/rsrc: get rid of per-ring
io_rsrc_node list") removed the separate tag table for registered nodes.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20250219033444.2020136-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
sqe->opcode is used for different tables, make sure we santitise it
against speculations.
Cc: stable@vger.kernel.org
Fixes: d3656344fea03 ("io_uring: add lookup table for various opcode needs")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/7eddbf31c8ca0a3947f8ed98271acc2b4349c016.1739568408.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When io_uring submission goes async for the first time on a given task,
we'll try to create a worker thread to handle the submission. Creating
this worker thread can fail due to various transient conditions, such as
an outstanding signal in the forking thread, so we have retry logic with
a limit of 3 retries. However, this retry logic appears to be too
aggressive/fast - we've observed a thread blowing through the retry
limit while having the same outstanding signal the whole time. Here's an
excerpt of some tracing that demonstrates the issue:
First, signal 26 is generated for the process. It ends up getting routed
to thread 92942.
0) cbd-92284 /* signal_generate: sig=26 errno=0 code=-2 comm=psblkdASD pid=92934 grp=1 res=0 */
This causes create_io_thread in the signalled thread to fail with
ERESTARTNOINTR, and thus a retry is queued.
13) task_th-92942 /* io_uring_queue_async_work: ring 000000007325c9ae, request 0000000080c96d8e, user_data 0x0, opcode URING_CMD, flags 0x8240001, normal queue, work 000000006e96dd3f */
13) task_th-92942 io_wq_enqueue() {
13) task_th-92942 _raw_spin_lock();
13) task_th-92942 io_wq_activate_free_worker();
13) task_th-92942 _raw_spin_lock();
13) task_th-92942 create_io_worker() {
13) task_th-92942 __kmalloc_cache_noprof();
13) task_th-92942 __init_swait_queue_head();
13) task_th-92942 kprobe_ftrace_handler() {
13) task_th-92942 get_kprobe();
13) task_th-92942 aggr_pre_handler() {
13) task_th-92942 pre_handler_kretprobe();
13) task_th-92942 /* create_enter: (create_io_thread+0x0/0x50) fn=0xffffffff8172c0e0 arg=0xffff888996bb69c0 node=-1 */
13) task_th-92942 } /* aggr_pre_handler */
...
13) task_th-92942 } /* copy_process */
13) task_th-92942 } /* create_io_thread */
13) task_th-92942 kretprobe_rethook_handler() {
13) task_th-92942 /* create_exit: (create_io_worker+0x8a/0x1a0 <- create_io_thread) arg1=0xfffffffffffffdff */
13) task_th-92942 } /* kretprobe_rethook_handler */
13) task_th-92942 queue_work_on() {
...
The CPU is then handed to a kworker to process the queued retry:
------------------------------------------
13) task_th-92942 => kworker-54154
------------------------------------------
13) kworker-54154 io_workqueue_create() {
13) kworker-54154 io_queue_worker_create() {
13) kworker-54154 task_work_add() {
13) kworker-54154 wake_up_state() {
13) kworker-54154 try_to_wake_up() {
13) kworker-54154 _raw_spin_lock_irqsave();
13) kworker-54154 _raw_spin_unlock_irqrestore();
13) kworker-54154 } /* try_to_wake_up */
13) kworker-54154 } /* wake_up_state */
13) kworker-54154 kick_process();
13) kworker-54154 } /* task_work_add */
13) kworker-54154 } /* io_queue_worker_create */
13) kworker-54154 } /* io_workqueue_create */
And then we immediately switch back to the original task to try creating
a worker again. This fails, because the original task still hasn't
handled its signal.
-----------------------------------------
13) kworker-54154 => task_th-92942
------------------------------------------
13) task_th-92942 create_worker_cont() {
13) task_th-92942 kprobe_ftrace_handler() {
13) task_th-92942 get_kprobe();
13) task_th-92942 aggr_pre_handler() {
13) task_th-92942 pre_handler_kretprobe();
13) task_th-92942 /* create_enter: (create_io_thread+0x0/0x50) fn=0xffffffff8172c0e0 arg=0xffff888996bb69c0 node=-1 */
13) task_th-92942 } /* aggr_pre_handler */
13) task_th-92942 } /* kprobe_ftrace_handler */
13) task_th-92942 create_io_thread() {
13) task_th-92942 copy_process() {
13) task_th-92942 task_active_pid_ns();
13) task_th-92942 _raw_spin_lock_irq();
13) task_th-92942 recalc_sigpending();
13) task_th-92942 _raw_spin_lock_irq();
13) task_th-92942 } /* copy_process */
13) task_th-92942 } /* create_io_thread */
13) task_th-92942 kretprobe_rethook_handler() {
13) task_th-92942 /* create_exit: (create_worker_cont+0x35/0x1b0 <- create_io_thread) arg1=0xfffffffffffffdff */
13) task_th-92942 } /* kretprobe_rethook_handler */
13) task_th-92942 io_worker_release();
13) task_th-92942 queue_work_on() {
13) task_th-92942 clear_pending_if_disabled();
13) task_th-92942 __queue_work() {
13) task_th-92942 } /* __queue_work */
13) task_th-92942 } /* queue_work_on */
13) task_th-92942 } /* create_worker_cont */
The pattern repeats another couple times until we blow through the retry
counter, at which point we give up. All outstanding work is canceled,
and the io_uring command which triggered all this is failed with
ECANCELED:
13) task_th-92942 io_acct_cancel_pending_work() {
...
13) task_th-92942 /* io_uring_complete: ring 000000007325c9ae, req 0000000080c96d8e, user_data 0x0, result -125, cflags 0x0 extra1 0 extra2 0 */
Finally, the task gets around to processing its outstanding signal 26,
but it's too late.
13) task_th-92942 /* signal_deliver: sig=26 errno=0 code=-2 sa_handler=59566a0 sa_flags=14000000 */
Try to address this issue by adding a small scaling delay when retrying
worker creation. This should give the forking thread time to handle its
signal in the above case. This isn't a particularly satisfying solution,
as sufficiently paradoxical scheduling would still have us hitting the
same issue, and I'm open to suggestions for something better. But this
is likely to prevent this (already rare) issue from hitting in practice.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Link: https://lore.kernel.org/r/20250208-wq_retry-v2-1-4f6f5041d303@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull io_uring fixes from Jens Axboe:
- fixes for a potential data corruption issue with IORING_OP_URING_CMD,
where not all the SQE data is stable. Will be revisited in the
future, for now it ends up with just always copying it beyond prep to
provide the same guarantees as all other opcodes
- make the waitid opcode setup async data like any other opcodes (no
real fix here, just a consistency thing)
- fix for waitid io_tw_state abuse
- when a buffer group is type is changed, do so by allocating a new
buffer group entry and discard the old one, rather than migrating
* tag 'io_uring-6.14-20250214' of git://git.kernel.dk/linux:
io_uring/uring_cmd: unconditionally copy SQEs at prep time
io_uring/waitid: setup async data in the prep handler
io_uring/uring_cmd: remove dead req_has_async_data() check
io_uring/uring_cmd: switch sqe to async_data on EAGAIN
io_uring/uring_cmd: don't assume io_uring_cmd_data layout
io_uring/kbuf: reallocate buf lists on upgrade
io_uring/waitid: don't abuse io_tw_state
|
|
This isn't generally necessary, but conditions have been observed where
SQE data is accessed from the original SQE after prep has been done and
outside of the initial issue. Opcode prep handlers must ensure that any
SQE related data is stable beyond the prep phase, but uring_cmd is a bit
special in how it handles the SQE which makes it susceptible to reading
stale data. If the application has reused the SQE before the original
completes, then that can lead to data corruption.
Down the line we can relax this again once uring_cmd has been sanitized
a bit, and avoid unnecessarily copying the SQE.
Fixes: 5eff57fa9f3a ("io_uring/uring_cmd: defer SQE copying until it's needed")
Reported-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is the idiomatic way that opcodes should setup their async data,
so that it's always valid inside ->issue() without issue needing to
do that.
Fixes: f31ecf671ddc4 ("io_uring: add IORING_OP_WAITID support")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Any uring_cmd always has async data allocated now, there's no reason to
check and clear a cached copy of the SQE.
Fixes: d10f19dff56e ("io_uring/uring_cmd: switch to always allocating async data")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
5eff57fa9f3a ("io_uring/uring_cmd: defer SQE copying until it's needed")
moved the unconditional memcpy() of the uring_cmd SQE to async_data
to 2 cases when the request goes async:
- If REQ_F_FORCE_ASYNC is set to force the initial issue to go async
- If ->uring_cmd() returns -EAGAIN in the initial non-blocking issue
Unlike the REQ_F_FORCE_ASYNC case, in the EAGAIN case, io_uring_cmd()
copies the SQE to async_data but neglects to update the io_uring_cmd's
sqe field to point to async_data. As a result, sqe still points to the
slot in the userspace-mapped SQ. At the end of io_submit_sqes(), the
kernel advances the SQ head index, allowing userspace to reuse the slot
for a new SQE. If userspace reuses the slot before the io_uring worker
reissues the original SQE, the io_uring_cmd's SQE will be corrupted.
Introduce a helper io_uring_cmd_cache_sqes() to copy the original SQE to
the io_uring_cmd's async_data and point sqe there. Use it for both the
REQ_F_FORCE_ASYNC and EAGAIN cases. This ensures the uring_cmd doesn't
read from the SQ slot after it has been returned to userspace.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 5eff57fa9f3a ("io_uring/uring_cmd: defer SQE copying until it's needed")
Link: https://lore.kernel.org/r/20250212204546.3751645-3-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
eaf72f7b414f ("io_uring/uring_cmd: cleanup struct io_uring_cmd_data
layout") removed most of the places assuming struct io_uring_cmd_data
has sqes as its first field. However, the EAGAIN case in io_uring_cmd()
still compares ioucmd->sqe to the struct io_uring_cmd_data pointer using
a void * cast. Since fa3595523d72 ("io_uring: get rid of alloc cache
init_once handling"), sqes is no longer io_uring_cmd_data's first field.
As a result, the pointers will always compare unequal and memcpy() may
be called with the same source and destination.
Replace the incorrect void * cast with the address of the sqes field.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: eaf72f7b414f ("io_uring/uring_cmd: cleanup struct io_uring_cmd_data layout")
Link: https://lore.kernel.org/r/20250212204546.3751645-2-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
IORING_REGISTER_PBUF_RING can reuse an old struct io_buffer_list if it
was created for legacy selected buffer and has been emptied. It violates
the requirement that most of the field should stay stable after publish.
Always reallocate it instead.
Cc: stable@vger.kernel.org
Reported-by: Pumpkin Chang <pumpkin@devco.re>
Fixes: 2fcabce2d7d34 ("io_uring: disallow mixed provided buffer group registrations")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
struct io_tw_state is managed by core io_uring, and opcode handling code
must never try to cheat and create their own instances, it's plain
incorrect.
io_waitid_complete() attempts exactly that outside of the task work
context, and even though the ring is locked, there would be no one to
reap the requests from the defer completion list. It only works now
because luckily it's called before io_uring_try_cancel_uring_cmd(),
which flushes completions.
Fixes: f31ecf671ddc4 ("io_uring: add IORING_OP_WAITID support")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
"Fix a dangling pointer bug in the futex code used by the uring code.
It isn't causing problems at the moment due to uring ABI limitations
leaving it essentially unused in current usages, but is a good idea to
fix nevertheless"
* tag 'locking-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Pass in task to futex_queue()
|
|
Pull more io_uring updates from Jens Axboe:
- Series cleaning up the alloc cache changes from this merge window,
and then another series on top making it better yet.
This also solves an issue with KASAN_EXTRA_INFO, by making io_uring
resilient to KASAN using parts of the freed struct for storage
- Cleanups and simplications to buffer cloning and io resource node
management
- Fix an issue introduced in this merge window where READ/WRITE_ONCE
was used on an atomic_t, which made some archs complain
- Fix for an errant connect retry when the socket has been shut down
- Fix for multishot and provided buffers
* tag 'io_uring-6.14-20250131' of git://git.kernel.dk/linux:
io_uring/net: don't retry connect operation on EPOLLERR
io_uring/rw: simplify io_rw_recycle()
io_uring: remove !KASAN guards from cache free
io_uring/net: extract io_send_select_buffer()
io_uring/net: clean io_msg_copy_hdr()
io_uring/net: make io_net_vec_assign() return void
io_uring: add alloc_cache.c
io_uring: dont ifdef io_alloc_cache_kasan()
io_uring: include all deps for alloc_cache.h
io_uring: fix multishots with selected buffers
io_uring/register: use atomic_read/write for sq_flags migration
io_uring/alloc_cache: get rid of _nocache() helper
io_uring: get rid of alloc cache init_once handling
io_uring/uring_cmd: cleanup struct io_uring_cmd_data layout
io_uring/uring_cmd: use cached cmd_op in io_uring_cmd_sock()
io_uring/msg_ring: don't leave potentially dangling ->tctx pointer
io_uring/rsrc: Move lockdep assert from io_free_rsrc_node() to caller
io_uring/rsrc: remove unused parameter ctx for io_rsrc_node_alloc()
io_uring: clean up io_uring_register_get_file()
io_uring/rsrc: Simplify buffer cloning by locking both rings
|
|
If a socket is shutdown before the connection completes, POLLERR is set
in the poll mask. However, connect ignores this as it doesn't know, and
attempts the connection again. This may lead to a bogus -ETIMEDOUT
result, where it should have noticed the POLLERR and just returned
-ECONNRESET instead.
Have the poll logic check for whether or not POLLERR is set in the mask,
and if so, mark the request as failed. Then connect can appropriately
fail the request rather than retry it.
Reported-by: Sergey Galas <ssgalas@cloud.ru>
Cc: stable@vger.kernel.org
Link: https://github.com/axboe/liburing/discussions/1335
Fixes: 3fb1bd688172 ("io_uring/net: handle -EINPROGRESS correct for IORING_OP_CONNECT")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Instead of freeing iovecs in case of IO_URING_F_UNLOCKED in
io_rw_recycle(), leave it be and rely on the core io_uring code to
call io_readv_writev_cleanup() later. This way the iovec will get
recycled and we can clean up io_rw_recycle() and kill
io_rw_iovec_free().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/14f83b112eb40078bea18e15d77a4f99fc981a44.1738087204.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Test setups (with KASAN) will avoid !KASAN sections, and so it's not
testing paths that would be exercised otherwise. That's bad as to be
sure that your code works you now have to specifically test both KASAN
and !KASAN configs.
Remove !CONFIG_KASAN guards from io_netmsg_cache_free() and
io_rw_cache_free(). The free functions should always be getting valid
entries, and even though for KASAN iovecs should already be cleared,
that's better than skipping the chunks completely.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/d6078a51c7137a243f9d00849bc3daa660873209.1738087204.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Extract a helper out of io_send() for provided buffer selection to
improve readability as it has grown to take too many lines.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/26a769cdabd61af7f40c5d88a22469c5ad071796.1738087204.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Put msg->msg_iov into a local variable in io_msg_copy_hdr(), it reads
better and clearly shows the used types.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/6a5d4f7a96b10e571d6128be010166b3aaf7afd5.1738087204.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_net_vec_assign() can only return 0 and it doesn't make sense for it
to fail, so make it return void.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/7c1a2390c99e17d3ae4e8562063e572d3cdeb164.1738087204.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Avoid inlining all and everything from alloc_cache.h and move cold bits
into a new file.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/06984c6cd58e703f7cfae5ab3067912f9f635a06.1738087204.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use IS_ENABLED in io_alloc_cache_kasan() so at least it gets compile
tested without KASAN.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/35e53e83f6e16478dca0028a64a6cc905dc764d3.1738087204.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
alloc_cache.h uses types it doesn't declare and thus depends on the
order in which it's included. Make it self contained and pull all needed
definitions.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/39569f3d5b250b4fe78bb609d57f67d3736ebcc4.1738087204.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We do io_kbuf_recycle() when arming a poll but every iteration of a
multishot can grab more buffers, which is why we need to flush the kbuf
ring state before continuing with waiting.
Cc: stable@vger.kernel.org
Fixes: b3fdea6ecb55c ("io_uring: multishot recv")
Reported-by: Muhammad Ramdhan <ramdhan@starlabs.sg>
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Reported-by: Jacob Soo <jacob.soo@starlabs.sg>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1bfc9990fe435f1fc6152ca9efeba5eb3e68339c.1738025570.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add the const qualifier to all the ctl_tables in the tree except for
watchdog_hardlockup_sysctl, memory_allocation_profiling_sysctls,
loadpin_sysctl_table and the ones calling register_net_sysctl (./net,
drivers/inifiniband dirs). These are special cases as they use a
registration function with a non-const qualified ctl_table argument or
modify the arrays before passing them on to the registration function.
Constifying ctl_table structs will prevent the modification of
proc_handler function pointers as the arrays would reside in .rodata.
This is made possible after commit 78eb4ea25cd5 ("sysctl: treewide:
constify the ctl_table argument of proc_handlers") constified all the
proc_handlers.
Created this by running an spatch followed by a sed command:
Spatch:
virtual patch
@
depends on !(file in "net")
disable optional_qualifier
@
identifier table_name != {
watchdog_hardlockup_sysctl,
iwcm_ctl_table,
ucma_ctl_table,
memory_allocation_profiling_sysctls,
loadpin_sysctl_table
};
@@
+ const
struct ctl_table table_name [] = { ... };
sed:
sed --in-place \
-e "s/struct ctl_table .table = &uts_kern/const struct ctl_table *table = \&uts_kern/" \
kernel/utsname_sysctl.c
Reviewed-by: Song Liu <song@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> # for kernel/trace/
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Reviewed-by: Darrick J. Wong <djwong@kernel.org> # xfs
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"The various patchsets are summarized below. Plus of course many
indivudual patches which are described in their changelogs.
- "Allocate and free frozen pages" from Matthew Wilcox reorganizes
the page allocator so we end up with the ability to allocate and
free zero-refcount pages. So that callers (ie, slab) can avoid a
refcount inc & dec
- "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to
use large folios other than PMD-sized ones
- "Fix mm/rodata_test" from Petr Tesarik performs some maintenance
and fixes for this small built-in kernel selftest
- "mas_anode_descend() related cleanup" from Wei Yang tidies up part
of the mapletree code
- "mm: fix format issues and param types" from Keren Sun implements a
few minor code cleanups
- "simplify split calculation" from Wei Yang provides a few fixes and
a test for the mapletree code
- "mm/vma: make more mmap logic userland testable" from Lorenzo
Stoakes continues the work of moving vma-related code into the
(relatively) new mm/vma.c
- "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David
Hildenbrand cleans up and rationalizes handling of gfp flags in the
page allocator
- "readahead: Reintroduce fix for improper RA window sizing" from Jan
Kara is a second attempt at fixing a readahead window sizing issue.
It should reduce the amount of unnecessary reading
- "synchronously scan and reclaim empty user PTE pages" from Qi Zheng
addresses an issue where "huge" amounts of pte pagetables are
accumulated:
https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/
Qi's series addresses this windup by synchronously freeing PTE
memory within the context of madvise(MADV_DONTNEED)
- "selftest/mm: Remove warnings found by adding compiler flags" from
Muhammad Usama Anjum fixes some build warnings in the selftests
code when optional compiler warnings are enabled
- "mm: don't use __GFP_HARDWALL when migrating remote pages" from
David Hildenbrand tightens the allocator's observance of
__GFP_HARDWALL
- "pkeys kselftests improvements" from Kevin Brodsky implements
various fixes and cleanups in the MM selftests code, mainly
pertaining to the pkeys tests
- "mm/damon: add sample modules" from SeongJae Park enhances DAMON to
estimate application working set size
- "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn
provides some cleanups to memcg's hugetlb charging logic
- "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song
removes the global swap cgroup lock. A speedup of 10% for a
tmpfs-based kernel build was demonstrated
- "zram: split page type read/write handling" from Sergey Senozhatsky
has several fixes and cleaups for zram in the area of
zram_write_page(). A watchdog softlockup warning was eliminated
- "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin
Brodsky cleans up the pagetable destructor implementations. A rare
use-after-free race is fixed
- "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes
simplifies and cleans up the debugging code in the VMA merging
logic
- "Account page tables at all levels" from Kevin Brodsky cleans up
and regularizes the pagetable ctor/dtor handling. This results in
improvements in accounting accura |
