summaryrefslogtreecommitdiff
path: root/kernel/fork.c
AgeCommit message (Collapse)AuthorFilesLines
2026-04-18unshare: fix unshare_fs() handlingAl Viro1-1/+1
[ Upstream commit 6c4b2243cb6c0755159bd567130d5e12e7b10d9f ] There's an unpleasant corner case in unshare(2), when we have a CLONE_NEWNS in flags and current->fs hadn't been shared at all; in that case copy_mnt_ns() gets passed current->fs instead of a private copy, which causes interesting warts in proof of correctness] > I guess if private means fs->users == 1, the condition could still be true. Unfortunately, it's worse than just a convoluted proof of correctness. Consider the case when we have CLONE_NEWCGROUP in addition to CLONE_NEWNS (and current->fs->users == 1). We pass current->fs to copy_mnt_ns(), all right. Suppose it succeeds and flips current->fs->{pwd,root} to corresponding locations in the new namespace. Now we proceed to copy_cgroup_ns(), which fails (e.g. with -ENOMEM). We call put_mnt_ns() on the namespace created by copy_mnt_ns(), it's destroyed and its mount tree is dissolved, but... current->fs->root and current->fs->pwd are both left pointing to now detached mounts. They are pinning those, so it's not a UAF, but it leaves the calling process with unshare(2) failing with -ENOMEM _and_ leaving it with pwd and root on detached isolated mounts. The last part is clearly a bug. There is other fun related to that mess (races with pivot_root(), including the one between pivot_root() and fork(), of all things), but this one is easy to isolate and fix - treat CLONE_NEWNS as "allocate a new fs_struct even if it hadn't been shared in the first place". Sure, we could go for something like "if both CLONE_NEWNS *and* one of the things that might end up failing after copy_mnt_ns() call in create_new_namespaces() are set, force allocation of new fs_struct", but let's keep it simple - the cost of copy_fs_struct() is trivial. Another benefit is that copy_mnt_ns() with CLONE_NEWNS *always* gets a freshly allocated fs_struct, yet to be attached to anything. That seriously simplifies the analysis... FWIW, that bug had been there since the introduction of unshare(2) ;-/ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://patch.msgid.link/20260207082524.GE3183987@ZenIV Tested-by: Waiman Long <longman@redhat.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-10-19copy_sighand: Handle architectures where sizeof(unsigned long) < sizeof(u64)Simon Schuster1-1/+1
commit 04ff48239f46e8b493571e260bd0e6c3a6400371 upstream. With the introduction of clone3 in commit 7f192e3cd316 ("fork: add clone3") the effective bit width of clone_flags on all architectures was increased from 32-bit to 64-bit. However, the signature of the copy_* helper functions (e.g., copy_sighand) used by copy_process was not adapted. As such, they truncate the flags on any 32-bit architectures that supports clone3 (arc, arm, csky, m68k, microblaze, mips32, openrisc, parisc32, powerpc32, riscv32, x86-32 and xtensa). For copy_sighand with CLONE_CLEAR_SIGHAND being an actual u64 constant, this triggers an observable bug in kernel selftest clone3_clear_sighand: if (clone_flags & CLONE_CLEAR_SIGHAND) in function copy_sighand within fork.c will always fail given: unsigned long /* == uint32_t */ clone_flags #define CLONE_CLEAR_SIGHAND 0x100000000ULL This commit fixes the bug by always passing clone_flags to copy_sighand via their declared u64 type, invariant of architecture-dependent integer sizes. Fixes: b612e5df4587 ("clone3: add CLONE_CLEAR_SIGHAND") Cc: stable@vger.kernel.org # linux-5.5+ Signed-off-by: Simon Schuster <schuster.simon@siemens-energy.com> Link: https://lore.kernel.org/20250901-nios2-implement-clone3-v2-1-53fcf5577d57@siemens-energy.com Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-28mm: drop the assumption that VM_SHARED always implies writableLorenzo Stoakes1-1/+1
[ Upstream commit e8e17ee90eaf650c855adb0a3e5e965fd6692ff1 ] Patch series "permit write-sealed memfd read-only shared mappings", v4. The man page for fcntl() describing memfd file seals states the following about F_SEAL_WRITE:- Furthermore, trying to create new shared, writable memory-mappings via mmap(2) will also fail with EPERM. With emphasis on 'writable'. In turns out in fact that currently the kernel simply disallows all new shared memory mappings for a memfd with F_SEAL_WRITE applied, rendering this documentation inaccurate. This matters because users are therefore unable to obtain a shared mapping to a memfd after write sealing altogether, which limits their usefulness. This was reported in the discussion thread [1] originating from a bug report [2]. This is a product of both using the struct address_space->i_mmap_writable atomic counter to determine whether writing may be permitted, and the kernel adjusting this counter when any VM_SHARED mapping is performed and more generally implicitly assuming VM_SHARED implies writable. It seems sensible that we should only update this mapping if VM_MAYWRITE is specified, i.e. whether it is possible that this mapping could at any point be written to. If we do so then all we need to do to permit write seals to function as documented is to clear VM_MAYWRITE when mapping read-only. It turns out this functionality already exists for F_SEAL_FUTURE_WRITE - we can therefore simply adapt this logic to do the same for F_SEAL_WRITE. We then hit a chicken and egg situation in mmap_region() where the check for VM_MAYWRITE occurs before we are able to clear this flag. To work around this, perform this check after we invoke call_mmap(), with careful consideration of error paths. Thanks to Andy Lutomirski for the suggestion! [1]:https://lore.kernel.org/all/20230324133646.16101dfa666f253c4715d965@linux-foundation.org/ [2]:https://bugzilla.kernel.org/show_bug.cgi?id=217238 This patch (of 3): There is a general assumption that VMAs with the VM_SHARED flag set are writable. If the VM_MAYWRITE flag is not set, then this is simply not the case. Update those checks which affect the struct address_space->i_mmap_writable field to explicitly test for this by introducing [vma_]is_shared_maywrite() helper functions. This remains entirely conservative, as the lack of VM_MAYWRITE guarantees that the VMA cannot be written to. Link: https://lkml.kernel.org/r/cover.1697116581.git.lstoakes@gmail.com Link: https://lkml.kernel.org/r/d978aefefa83ec42d18dfa964ad180dbcde34795.1697116581.git.lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Suggested-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org [isaacmanjarres: resolved merge conflicts due to due to refactoring that happened in upstream commit 5de195060b2e ("mm: resolve faulty mmap_region() error path behaviour")] Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-04fork: use pidfd_prepare()Christian Brauner1-11/+2
commit ca7707f5430ad6b1c9cb7cee0a7f67d69328bb2d upstream. Stop open-coding get_unused_fd_flags() and anon_inode_getfile(). That's brittle just for keeping the flags between both calls in sync. Use the dedicated helper. Message-Id: <20230327-pidfd-file-api-v1-2-5c0e9a3158e4@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-04pid: add pidfd_prepare()Christian Brauner1-0/+85
commit 6ae930d9dbf2d093157be33428538c91966d8a9f upstream. Add a new helper that allows to reserve a pidfd and allocates a new pidfd file that stashes the provided struct pid. This will allow us to remove places that either open code this function or that call pidfd_create() but then have to call close_fd() because there are still failure points after pidfd_create() has been called. Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230327-pidfd-file-api-v1-1-5c0e9a3158e4@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-14posix-cpu-timers: Clear TICK_DEP_BIT_POSIX_TIMER on cloneBenjamin Segall1-0/+2
[ Upstream commit b5413156bad91dc2995a5c4eab1b05e56914638a ] When cloning a new thread, its posix_cputimers are not inherited, and are cleared by posix_cputimers_init(). However, this does not clear the tick dependency it creates in tsk->tick_dep_mask, and the handler does not reach the code to clear the dependency if there were no timers to begin with. Thus if a thread has a cputimer running before clone/fork, all descendants will prevent nohz_full unless they create a cputimer of their own. Fix this by entirely clearing the tick_dep_mask in copy_process(). (There is currently no inherited state that needs a tick dependency) Process-wide timers do not have this problem because fork does not copy signal_struct as a baseline, it creates one from scratch. Fixes: b78783000d5c ("posix-cpu-timers: Migrate to use new tick dependency mask model") Signed-off-by: Ben Segall <bsegall@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/xm26o737bq8o.fsf@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17close_range(): fix the logics in descriptor table trimmingAl Viro1-17/+13
commit 678379e1d4f7443b170939525d3312cfc37bf86b upstream. Cloning a descriptor table picks the size that would cover all currently opened files. That's fine for clone() and unshare(), but for close_range() there's an additional twist - we clone before we close, and it would be a shame to have close_range(3, ~0U, CLOSE_RANGE_UNSHARE) leave us with a huge descriptor table when we are not going to keep anything past stderr, just because some large file descriptor used to be open before our call has taken it out. Unfortunately, it had been dealt with in an inherently racy way - sane_fdtable_size() gets a "don't copy anything past that" argument (passed via unshare_fd() and dup_fd()), close_range() decides how much should be trimmed and passes that to unshare_fd(). The problem is, a range that used to extend to the end of descriptor table back when close_range() had looked at it might very well have stuff grown after it by the time dup_fd() has allocated a new files_struct and started to figure out the capacity of fdtable to be attached to that. That leads to interesting pathological cases; at the very least it's a QoI issue, since unshare(CLONE_FILES) is atomic in a sense that it takes a snapshot of descriptor table one might have observed at some point. Since CLOSE_RANGE_UNSHARE close_range() is supposed to be a combination of unshare(CLONE_FILES) with plain close_range(), ending up with a weird state that would never occur with unshare(2) is confusing, to put it mildly. It's not hard to get rid of - all it takes is passing both ends of the range down to sane_fdtable_size(). There we are under ->files_lock, so the race is trivially avoided. So we do the following: * switch close_files() from calling unshare_fd() to calling dup_fd(). * undo the calling convention change done to unshare_fd() in 60997c3d45d9 "close_range: add CLOSE_RANGE_UNSHARE" * introduce struct fd_range, pass a pointer to that to dup_fd() and sane_fdtable_size() instead of "trim everything past that point" they are currently getting. NULL means "we are not going to be punching any holes"; NR_OPEN_MAX is gone. * make sane_fdtable_size() use find_last_bit() instead of open-coding it; it's easier to follow that way. * while we are at it, have dup_fd() report errors by returning ERR_PTR(), no need to use a separate int *errorp argument. Fixes: 60997c3d45d9 "close_range: add CLOSE_RANGE_UNSHARE" Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-23kernel/fork: beware of __put_task_struct() calling contextWander Lairson Costa1-0/+8
[ Upstream commit d243b34459cea30cfe5f3a9b2feb44e7daff9938 ] Under PREEMPT_RT, __put_task_struct() indirectly acquires sleeping locks. Therefore, it can't be called from an non-preemptible context. One practical example is splat inside inactive_task_timer(), which is called in a interrupt context: CPU: 1 PID: 2848 Comm: life Kdump: loaded Tainted: G W --------- Hardware name: HP ProLiant DL388p Gen8, BIOS P70 07/15/2012 Call Trace: dump_stack_lvl+0x57/0x7d mark_lock_irq.cold+0x33/0xba mark_lock+0x1e7/0x400 mark_usage+0x11d/0x140 __lock_acquire+0x30d/0x930 lock_acquire.part.0+0x9c/0x210 rt_spin_lock+0x27/0xe0 refill_obj_stock+0x3d/0x3a0 kmem_cache_free+0x357/0x560 inactive_task_timer+0x1ad/0x340 __run_hrtimer+0x8a/0x1a0 __hrtimer_run_queues+0x91/0x130 hrtimer_interrupt+0x10f/0x220 __sysvec_apic_timer_interrupt+0x7b/0xd0 sysvec_apic_timer_interrupt+0x4f/0xd0 asm_sysvec_apic_timer_interrupt+0x12/0x20 RIP: 0033:0x7fff196bf6f5 Instead of calling __put_task_struct() directly, we defer it using call_rcu(). A more natural approach would use a workqueue, but since in PREEMPT_RT, we can't allocate dynamic memory from atomic context, the code would become more complex because we would need to put the work_struct instance in the task_struct and initialize it when we allocate a new task_struct. The issue is reproducible with stress-ng: while true; do stress-ng --sched deadline --sched-period 1000000000 \ --sched-runtime 800000000 --sched-deadline \ 1000000000 --mmapfork 23 -t 20 done Reported-by: Hu Chunyu <chuhu@redhat.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Valentin Schneider <vschneid@redhat.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Wander Lairson Costa <wander@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20230614122323.37957-2-wander@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-08mm: Move mm_cachep initialization to mm_init()Peter Zijlstra1-14/+18
commit af80602799681c78f14fbe20b6185a56020dedee upstream. In order to allow using mm_alloc() much earlier, move initializing mm_cachep into mm_init(). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20221025201057.751153381@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-08x86/mm: Use mm_alloc() in poking_init()Peter Zijlstra1-5/+0
commit 3f4c8211d982099be693be9aa7d6fc4607dff290 upstream. Instead of duplicating init_mm, allocate a fresh mm. The advantage is that mm_alloc() has much simpler dependencies. Additionally it makes more conceptual sense, init_mm has no (and must not have) user state to duplicate. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20221025201057.816175235@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-14bpf: Fix UAF in task local storageKP Singh1-1/+1
[ Upstream commit b0fd1852bcc21accca6260ef245356d5c141ff66 ] When task local storage was generalized for tracing programs, the bpf_task_local_storage callback was moved from a BPF LSM hook callback for security_task_free LSM hook to it's own callback. But a failure case in bad_fork_cleanup_security was missed which, when triggered, led to a dangling task owner pointer and a subsequent use-after-free. Move the bpf_task_storage_free to the very end of free_task to handle all failure cases. This issue was noticed when a BPF LSM program was attached to the task_alloc hook on a kernel with KASAN enabled. The program used bpf_task_storage_get to copy the task local storage from the current task to the new task being created. Fixes: a10787e6d58c ("bpf: Enable task local storage for tracing programs") Reported-by: Kuba Piecuch <jpiecuch@google.com> Signed-off-by: KP Singh <kpsingh@kernel.org> Acked-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230602002612.1117381-1-kpsingh@kernel.org Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-17fork: allow CLONE_NEWTIME in clone3 flagsTobias Klauser1-1/+1
commit a402f1e35313fc7ce2ca60f543c4402c2c7c3544 upstream. Currently, calling clone3() with CLONE_NEWTIME in clone_args->flags fails with -EINVAL. This is because CLONE_NEWTIME intersects with CSIGNAL. However, CSIGNAL was deprecated when clone3 was introduced in commit 7f192e3cd316 ("fork: add clone3"), allowing re-use of that part of clone flags. Fix this by explicitly allowing CLONE_NEWTIME in clone3_args_valid. This is also in line with the respective check in check_unshare_flags which allow CLONE_NEWTIME for unshare(). Fixes: 769071ac9f20 ("ns: Introduce Time Namespace") Cc: Andrey Vagin <avagin@openvz.org> Cc: Christian Brauner <brauner@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-31seccomp: Move copy_seccomp() to no failure path.Kuniyuki Iwashima1-6/+11
[ Upstream commit a1140cb215fa13dcec06d12ba0c3ee105633b7c4 ] Our syzbot instance reported memory leaks in do_seccomp() [0], similar to the report [1]. It shows that we miss freeing struct seccomp_filter and some objects included in it. We can reproduce the issue with the program below [2] which calls one seccomp() and two clone() syscalls. The first clone()d child exits earlier than its parent and sends a signal to kill it during the second clone(), more precisely before the fatal_signal_pending() test in copy_process(). When the parent receives the signal, it has to destroy the embryonic process and return -EINTR to user space. In the failure path, we have to call seccomp_filter_release() to decrement the filter's refcount. Initially, we called it in free_task() called from the failure path, but the commit 3a15fb6ed92c ("seccomp: release filter after task is fully dead") moved it to release_task() to notify user space as early as possible that the filter is no longer used. To keep the change and current seccomp refcount semantics, let's move copy_seccomp() just after the signal check and add a WARN_ON_ONCE() in free_task() for future debugging. [0]: unreferenced object 0xffff8880063add00 (size 256): comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.914s) hex dump (first 32 bytes): 01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ backtrace: do_seccomp (./include/linux/slab.h:600 ./include/linux/slab.h:733 kernel/seccomp.c:666 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) unreferenced object 0xffffc90000035000 (size 4096): comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.915s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 05 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: __vmalloc_node_range (mm/vmalloc.c:3226) __vmalloc_node (mm/vmalloc.c:3261 (discriminator 4)) bpf_prog_alloc_no_stats (kernel/bpf/core.c:91) bpf_prog_alloc (kernel/bpf/core.c:129) bpf_prog_create_from_user (net/core/filter.c:1414) do_seccomp (kernel/seccomp.c:671 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) unreferenced object 0xffff888003fa1000 (size 1024): comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.915s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: bpf_prog_alloc_no_stats (./include/linux/slab.h:600 ./include/linux/slab.h:733 kernel/bpf/core.c:95) bpf_prog_alloc (kernel/bpf/core.c:129) bpf_prog_create_from_user (net/core/filter.c:1414) do_seccomp (kernel/seccomp.c:671 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) unreferenced object 0xffff888006360240 (size 16): comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.915s) hex dump (first 16 bytes): 01 00 37 00 76 65 72 6c e0 83 01 06 80 88 ff ff ..7.verl........ backtrace: bpf_prog_store_orig_filter (net/core/filter.c:1137) bpf_prog_create_from_user (net/core/filter.c:1428) do_seccomp (kernel/seccomp.c:671 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) unreferenced object 0xffff8880060183e0 (size 8): comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.915s) hex dump (first 8 bytes): 06 00 00 00 00 00 ff 7f ........ backtrace: kmemdup (mm/util.c:129) bpf_prog_store_orig_filter (net/core/filter.c:1144) bpf_prog_create_from_user (net/core/filter.c:1428) do_seccomp (kernel/seccomp.c:671 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) [1]: https://syzkaller.appspot.com/bug?id=2809bb0ac77ad9aa3f4afe42d6a610aba594a987 [2]: void main(void) { struct sock_filter filter[] = { BPF_STMT(BPF_RET | BPF_K, SECCOMP_RET_ALLOW), }; struct sock_fprog fprog = { .len = sizeof(filter) / sizeof(filter[0]), .filter = filter, }; long i, pid; syscall(__NR_seccomp, SECCOMP_SET_MODE_FILTER, 0, &fprog); for (i = 0; i < 2; i++) { pid = syscall(__NR_clone, CLONE_NEWNET | SIGKILL, NULL, NULL, 0); if (pid == 0) return; } } Fixes: 3a15fb6ed92c ("seccomp: release filter after task is fully dead") Reported-by: syzbot+ab17848fe269b573eb71@syzkaller.appspotmail.com Reported-by: Ayushman Dutta <ayudutta@amazon.com> Suggested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220823154532.82913-1-kuniyu@amazon.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15IB/core: Fix a nested dead lock as part of ODP flowYishai Hadas1-0/+1
[ Upstream commit 85eaeb5058f0f04dffb124c97c86b4f18db0b833 ] Fix a nested dead lock as part of ODP flow by using mmput_async(). From the below call trace [1] can see that calling mmput() once we have the umem_odp->umem_mutex locked as required by ib_umem_odp_map_dma_and_lock() might trigger in the same task the exit_mmap()->__mmu_notifier_release()->mlx5_ib_invalidate_range() which may dead lock when trying to lock the same mutex. Moving to use mmput_async() will solve the problem as the above exit_mmap() flow will be called in other task and will be executed once the lock will be available. [1] [64843.077665] task:kworker/u133:2 state:D stack: 0 pid:80906 ppid: 2 flags:0x00004000 [64843.077672] Workqueue: mlx5_ib_page_fault mlx5_ib_eqe_pf_action [mlx5_ib] [64843.077719] Call Trace: [64843.077722] <TASK> [64843.077724] __schedule+0x23d/0x590 [64843.077729] schedule+0x4e/0xb0 [64843.077735] schedule_preempt_disabled+0xe/0x10 [64843.077740] __mutex_lock.constprop.0+0x263/0x490 [64843.077747] __mutex_lock_slowpath+0x13/0x20 [64843.077752] mutex_lock+0x34/0x40 [64843.077758] mlx5_ib_invalidate_range+0x48/0x270 [mlx5_ib] [64843.077808] __mmu_notifier_release+0x1a4/0x200 [64843.077816] exit_mmap+0x1bc/0x200 [64843.077822] ? walk_page_range+0x9c/0x120 [64843.077828] ? __cond_resched+0x1a/0x50 [64843.077833] ? mutex_lock+0x13/0x40 [64843.077839] ? uprobe_clear_state+0xac/0x120 [64843.077860] mmput+0x5f/0x140 [64843.077867] ib_umem_odp_map_dma_and_lock+0x21b/0x580 [ib_core] [64843.077931] pagefault_real_mr+0x9a/0x140 [mlx5_ib] [64843.077962] pagefault_mr+0xb4/0x550 [mlx5_ib] [64843.077992] pagefault_single_data_segment.constprop.0+0x2ac/0x560 [mlx5_ib] [64843.078022] mlx5_ib_eqe_pf_action+0x528/0x780 [mlx5_ib] [64843.078051] process_one_work+0x22b/0x3d0 [64843.078059] worker_thread+0x53/0x410 [64843.078065] ? process_one_work+0x3d0/0x3d0 [64843.078073] kthread+0x12a/0x150 [64843.078079] ? set_kthread_struct+0x50/0x50 [64843.078085] ret_from_fork+0x22/0x30 [64843.078093] </TASK> Fixes: 36f30e486dce ("IB/core: Improve ODP to use hmm_range_fault()") Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Link: https://lore.kernel.org/r/74d93541ea533ef7daec6f126deb1072500aeb16.1661251841.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-08sched: Fix yet more sched_fork() racesPeter Zijlstra1-1/+12
commit b1e8206582f9d680cff7d04828708c8b6ab32957 upstream. Where commit 4ef0c5c6b5ba ("kernel/sched: Fix sched_fork() access an invalid sched_task_group") fixed a fork race vs cgroup, it opened up a race vs syscalls by not placing the task on the runqueue before it gets exposed through the pidhash. Commit 13765de8148f ("sched/fair: Fix fault in reweight_entity") is trying to fix a single instance of this, instead fix the whole class of issues, effectively reverting this commit. Fixes: 4ef0c5c6b5ba ("kernel/sched: Fix sched_fork() access an invalid sched_task_group") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Tadeusz Struk <tadeusz.struk@linaro.org> Tested-by: Zhang Qiao <zhangqiao22@huawei.com> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Link: https://lkml.kernel.org/r/YgoeCbwj5mbCR0qA@hirez.programming.kicks-ass.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23copy_process(): Move fd_install() out of sighand->siglock critical sectionWaiman Long1-4/+3
commit ddc204b517e60ae64db34f9832dc41dafa77c751 upstream. I was made aware of the following lockdep splat: [ 2516.308763] ===================================================== [ 2516.309085] WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected [ 2516.309433] 5.14.0-51.el9.aarch64+debug #1 Not tainted [ 2516.309703] ----------------------------------------------------- [ 2516.310149] stress-ng/153663 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 2516.310512] ffff0000e422b198 (&newf->file_lock){+.+.}-{2:2}, at: fd_install+0x368/0x4f0 [ 2516.310944] and this task is already holding: [ 2516.311248] ffff0000c08140d8 (&sighand->siglock){-.-.}-{2:2}, at: copy_process+0x1e2c/0x3e80 [ 2516.311804] which would create a new lock dependency: [ 2516.312066] (&sighand->siglock){-.-.}-{2:2} -> (&newf->file_lock){+.+.}-{2:2} [ 2516.312446] but this new dependency connects a HARDIRQ-irq-safe lock: [ 2516.312983] (&sighand->siglock){-.-.}-{2:2} : [ 2516.330700] Possible interrupt unsafe locking scenario: [ 2516.331075] CPU0 CPU1 [ 2516.331328] ---- ---- [ 2516.331580] lock(&newf->file_lock); [ 2516.331790] local_irq_disable(); [ 2516.332231] lock(&sighand->siglock); [ 2516.332579] lock(&newf->file_lock); [ 2516.332922] <Interrupt> [ 2516.333069] lock(&sighand->siglock); [ 2516.333291] *** DEADLOCK *** [ 2516.389845] stack backtrace: [ 2516.390101] CPU: 3 PID: 153663 Comm: stress-ng Kdump: loaded Not tainted 5.14.0-51.el9.aarch64+debug #1 [ 2516.390756] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 2516.391155] Call trace: [ 2516.391302] dump_backtrace+0x0/0x3e0 [ 2516.391518] show_stack+0x24/0x30 [ 2516.391717] dump_stack_lvl+0x9c/0xd8 [ 2516.391938] dump_stack+0x1c/0x38 [ 2516.392247] print_bad_irq_dependency+0x620/0x710 [ 2516.392525] check_irq_usage+0x4fc/0x86c [ 2516.392756] check_prev_add+0x180/0x1d90 [ 2516.392988] validate_chain+0x8e0/0xee0 [ 2516.393215] __lock_acquire+0x97c/0x1e40 [ 2516.393449] lock_acquire.part.0+0x240/0x570 [ 2516.393814] lock_acquire+0x90/0xb4 [ 2516.394021] _raw_spin_lock+0xe8/0x154 [ 2516.394244] fd_install+0x368/0x4f0 [ 2516.394451] copy_process+0x1f5c/0x3e80 [ 2516.394678] kernel_clone+0x134/0x660 [ 2516.394895] __do_sys_clone3+0x130/0x1f4 [ 2516.395128] __arm64_sys_clone3+0x5c/0x7c [ 2516.395478] invoke_syscall.constprop.0+0x78/0x1f0 [ 2516.395762] el0_svc_common.constprop.0+0x22c/0x2c4 [ 2516.396050] do_el0_svc+0xb0/0x10c [ 2516.396252] el0_svc+0x24/0x34 [ 2516.396436] el0t_64_sync_handler+0xa4/0x12c [ 2516.396688] el0t_64_sync+0x198/0x19c [ 2517.491197] NET: Registered PF_ATMPVC protocol family [ 2517.491524] NET: Registered PF_ATMSVC protocol family [ 2591.991877] sched: RT throttling activated One way to solve this problem is to move the fd_install() call out of the sighand->siglock critical section. Before commit 6fd2fe494b17 ("copy_process(): don't use ksys_close() on cleanups"), the pidfd installation was done without holding both the task_list lock and the sighand->siglock. Obviously, holding these two locks are not really needed to protect the fd_install() call. So move the fd_install() call down to after the releases of both locks. Link: https://lore.kernel.org/r/20220208163912.1084752-1-longman@redhat.com Fixes: 6fd2fe494b17 ("copy_process(): don't use ksys_close() on cleanups") Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23ucounts: Enforce RLIMIT_NPROC not RLIMIT_NPROC+1Eric W. Biederman1-5/+5
commit 8f2f9c4d82f24f172ae439e5035fc1e0e4c229dd upstream. Michal Koutný <mkoutny@suse.com> wrote: > It was reported that v5.14 behaves differently when enforcing > RLIMIT_NPROC limit, namely, it allows one more task than previously. > This is consequence of the commit 21d1c5e386bc ("Reimplement > RLIMIT_NPROC on top of ucounts") that missed the sharpness of > equality in the forking path. This can be fixed either by fixing the test or by moving the increment to be before the test. Fix it my moving copy_creds which contains the increment before is_ucounts_overlimit. In the case of CLONE_NEWUSER the ucounts in the task_cred changes. The function is_ucounts_overlimit needs to use the final version of the ucounts for the new process. Which means moving the is_ucounts_overlimit test after copy_creds is necessary. Both the test in fork and the test in set_user were semantically changed when the code moved to ucounts. The change of the test in fork was bad because it was before the increment. The test in set_user was wrong and the change to ucounts fixed it. So this fix only restores the old behavior in one lcation not two. Link: https://lkml.kernel.org/r/20220204181144.24462-1-mkoutny@suse.com Link: https://lkml.kernel.org/r/20220216155832.680775-2-ebiederm@xmission.com Cc: stable@vger.kernel.org Reported-by: Michal Koutný <mkoutny@suse.com> Reviewed-by: Michal Koutný <mkoutny@suse.com> Fixes: 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18posix-cpu-timers: Clear task::posix_cputimers_work in copy_process()Michael Pratt1-0/+1
commit ca7752caeaa70bd31d1714af566c9809688544af upstream. copy_process currently copies task_struct.posix_cputimers_work as-is. If a timer interrupt arrives while handling clone and before dup_task_struct completes then the child task will have: 1. posix_cputimers_work.scheduled = true 2. posix_cputimers_work.work queued. copy_process clears task_struct.task_works, so (2) will have no effect and posix_cpu_timers_work will never run (not to mention it doesn't make sense for two tasks to share a common linked list). Since posix_cpu_timers_work never runs, posix_cputimers_work.scheduled is never cleared. Since scheduled is set, future timer interrupts will skip scheduling work, with the ultimate result that the task will never receive timer expirations. Together, the complete flow is: 1. Task 1 calls clone(), enters kernel. 2. Timer interrupt fires, schedules task work on Task 1. 2a. task_struct.posix_cputimers_work.scheduled = true 2b. task_struct.posix_cputimers_work.work added to task_struct.task_works. 3. dup_task_struct() copies Task 1 to Task 2. 4. copy_process() clears task_struct.task_works for Task 2. 5. Future timer interrupts on Task 2 see task_struct.posix_cputimers_work.scheduled = true and skip scheduling work. Fix this by explicitly clearing contents of task_struct.posix_cputimers_work in copy_process(). This was never meant to be shared or inherited across tasks in the first place. Fixes: 1fb497dd0030 ("posix-cpu-timers: Provide mechanisms to defer timer handling to task_work") Reported-by: Rhys Hiltner <rhys@justin.tv> Signed-off-by: Michael Pratt <mpratt@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211101210615.716522-1-mpratt@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18kernel/sched: Fix sched_fork() access an invalid sched_task_groupZhang Qiao1-1/+1
[ Upstream commit 4ef0c5c6b5ba1f38f0ea1cedad0cad722f00c14a ] There is a small race between copy_process() and sched_fork() where child->sched_task_group point to an already freed pointer. parent doing fork() | someone moving the parent | to another cgroup -------------------------------+------------------------------- copy_process() + dup_task_struct()<1> parent move to another cgroup, and free the old cgroup. <2> + sched_fork() + __set_task_cpu()<3> + task_fork_fair() + sched_slice()<4> In the worst case, this bug can lead to "use-after-free" and cause panic as shown above: (1) parent copy its sched_task_group to child at <1>; (2) someone move the parent to another cgroup and free the old cgroup at <2>; (3) the sched_task_group and cfs_rq that belong to the old cgroup will be accessed at <3> and <4>, which cause a panic: [] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [] PGD 8000001fa0a86067 P4D 8000001fa0a86067 PUD 2029955067 PMD 0 [] Oops: 0000 [#1] SMP PTI [] CPU: 7 PID: 648398 Comm: ebizzy Kdump: loaded Tainted: G OE --------- - - 4.18.0.x86_64+ #1 [] RIP: 0010:sched_slice+0x84/0xc0 [] Call Trace: [] task_fork_fair+0x81/0x120 [] sched_fork+0x132/0x240 [] copy_process.part.5+0x675/0x20e0 [] ? __handle_mm_fault+0x63f/0x690 [] _do_fork+0xcd/0x3b0 [] do_syscall_64+0x5d/0x1d0 [] entry_SYSCALL_64_after_hwframe+0x65/0xca [] RIP: 0033:0x7f04418cd7e1 Between cgroup_can_fork() and cgroup_post_fork(), the cgroup membership and thus sched_task_group can't change. So update child's sched_task_group at sched_post_fork() and move task_fork() and __set_task_cpu() (where accees the sched_task_group) from sched_fork() to sched_post_fork(). Fixes: 8323f26ce342 ("sched: Fix race in task_group") Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lkml.kernel.org/r/20210915064030.2231-1-zhangqiao22@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-08mm/hugetlb: initialize hugetlb_usage in mm_initLiu Zixian1-0/+1
After fork, the child process will get incorrect (2x) hugetlb_usage. If a process uses 5 2MB hugetlb pages in an anonymous mapping, HugetlbPages: 10240 kB and then forks, the child will show, HugetlbPages: 20480 kB The reason for double the amount is because hugetlb_usage will be copied from the parent and then increased when we copy page tables from parent to child. Child will have 2x actual usage. Fix this by adding hugetlb_count_init in mm_init. Link: https://lkml.kernel.org/r/20210826071742.877-1-liuzixian4@huawei.com Fixes: 5d317b2b6536 ("mm: hugetlb: proc: add HugetlbPages field to /proc/PID/status") Signed-off-by: Liu Zixian <liuzixian4@huawei.com> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-2/+0
Merge more updates from Andrew Morton: "147 patches, based on 7d2a07b769330c34b4deabeed939325c77a7ec2f. Subsystems affected by this patch series: mm (memory-hotplug, rmap, ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan), alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib, checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig, selftests, ipc, and scripts" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits) scripts: check_extable: fix typo in user error message mm/workingset: correct kernel-doc notations ipc: replace costly bailout check in sysvipc_find_ipc() selftests/memfd: remove unused variable Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH configs: remove the obsolete CONFIG_INPUT_POLLDEV prctl: allow to setup brk for et_dyn executables pid: cleanup the stale comment mentioning pidmap_init(). kernel/fork.c: unexport get_{mm,task}_exe_file coredump: fix memleak in dump_vma_snapshot() fs/coredump.c: log if a core dump is aborted due to changed file permissions nilfs2: use refcount_dec_and_lock() to fix potential UAF nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group nilfs2: fix NULL pointer in nilfs_##name##_attr_release nilfs2: fix memory leak in nilfs_sysfs_create_device_group trap: cleanup trap_init() init: move usermodehelper_enable() to populate_rootfs() ...
2021-09-08kernel/fork.c: unexport get_{mm,task}_exe_fileChristoph Hellwig1-2/+0
Only used by core code and the tomoyo which can't be a module either. Link: https://lkml.kernel.org/r/20210820095430.445242-1-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-04Merge tag 'denywrite-for-5.15' of git://github.com/davidhildenbrand/linuxLinus Torvalds1-11/+84
Pull MAP_DENYWRITE removal from David Hildenbrand: "Remove all in-tree usage of MAP_DENYWRITE from the kernel and remove VM_DENYWRITE. There are some (minor) user-visible changes: - We no longer deny write access to shared libaries loaded via legacy uselib(); this behavior matches modern user space e.g. dlopen(). - We no longer deny write access to the elf interpreter after exec completed, treating it just like shared libraries (which it often is). - We always deny write access to the file linked via /proc/pid/exe: sys_prctl(PR_SET_MM_MAP/EXE_FILE) will fail if write access to the file cannot be denied, and write access to the file will remain denied until the link is effectivel gone (exec, termination, sys_prctl(PR_SET_MM_MAP/EXE_FILE)) -- just as if exec'ing the file. Cross-compiled for a bunch of architectures (alpha, microblaze, i386, s390x, ...) and verified via ltp that especially the relevant tests (i.e., creat07 and execve04) continue working as expected" * tag 'denywrite-for-5.15' of git://github.com/davidhildenbrand/linux: fs: update documentation of get_write_access() and friends mm: ignore MAP_DENYWRITE in ksys_mmap_pgoff() mm: remove VM_DENYWRITE binfmt: remove in-tree usage of MAP_DENYWRITE kernel/fork: always deny write access to current MM exe_file kernel/fork: factor out replacing the current MM exe_file binfmt: don't use MAP_DENYWRITE when loading shared libraries via uselib()
2021-09-03mm: remove VM_DENYWRITEDavid Hildenbrand1-3/+0
All in-tree users of MAP_DENYWRITE are gone. MAP_DENYWRITE cannot be set from user space, so all users are gone; let's remove it. Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2021-09-03kernel/fork: always deny write access to current MM exe_fileDavid Hildenbrand1-6/+44
We want to remove VM_DENYWRITE only currently only used when mapping the executable during exec. During exec, we already deny_write_access() the executable, however, after exec completes the VMAs mapped with VM_DENYWRITE effectively keeps write access denied via deny_write_access(). Let's deny write access when setting or replacing the MM exe_file. With this change, we can remove VM_DENYWRITE for mapping executables. Make set_mm_exe_file() return an error in case deny_write_access() fails; note that this should never happen, because exec code does a deny_write_access() early and keeps write access denied when calling set_mm_exe_file. However, it makes the code easier to read and makes set_mm_exe_file() and replace_mm_exe_file() look more similar. This represents a minor user space visible change: sys_prctl(PR_SET_MM_MAP/EXE_FILE) can now fail if the file is already opened writable. Also, after sys_prctl(PR_SET_MM_MAP/EXE_FILE) the file cannot be opened writable. Note that we can already fail with -EACCES if the file doesn't have execute permissions. Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2021-09-03kernel/fork: factor out replacing the current MM exe_fileDavid Hildenbrand1-3/+41
Let's factor the main logic out into replace_mm_exe_file(), such that all mm->exe_file logic is contained in kernel/fork.c. While at it, perform some simple cleanups that are possible now that we're simplifying the individual functions. Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2021-08-31Merge tag 'net-next-5.15' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Enable memcg accounting for various networking objects. BPF: - Introduce bpf timers. - Add perf link and opaque bpf_cookie which the program can read out again, to be used in libbpf-based USDT library. - Add bpf_task_pt_regs() helper to access user space pt_regs in kprobes, to help user space stack unwinding. - Add support for UNIX sockets for BPF sockmap. - Extend BPF iterator support for UNIX domain sockets. - Allow BPF TCP congestion control progs and bpf iterators to call bpf_setsockopt(), e.g. to switch to another congestion control algorithm. Protocols: - Support IOAM Pre-allocated Trace with IPv6. - Support Management Component Transport Protocol. - bridge: multicast: add vlan support. - netfilter: add hooks for the SRv6 lightweight tunnel driver. - tcp: - enable mid-stream window clamping (by user space or BPF) - allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD - more accurate DSACK processing for RACK-TLP - mptcp: - add full mesh path manager option - add partial support for MP_FAIL - improve use of backup subflows - optimize option processing - af_unix: add OOB notification support. - ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the router. - mac80211: Target Wake Time support in AP mode. - can: j1939: extend UAPI to notify about RX status. Driver APIs: - Add page frag support in page pool API. - Many improvements to the DSA (distributed switch) APIs. - ethtool: extend IRQ coalesce uAPI with timer reset modes. - devlink: control which auxiliary devices are created. - Support CAN PHYs via the generic PHY subsystem. - Proper cross-chip support for tag_8021q. - Allow TX forwarding for the software bridge data path to be offloaded to capable devices. Drivers: - veth: more flexible channels number configuration. - openvswitch: introduce per-cpu upcall dispatch. - Add internet mix (IMIX) mode to pktgen. - Transparently handle XDP operations in the bonding driver. - Add LiteETH network driver. - Renesas (ravb): - support Gigabit Ethernet IP - NXP Ethernet switch (sja1105): - fast aging support - support for "H" switch topologies - traffic termination for ports under VLAN-aware bridge - Intel 1G Ethernet - support getcrosststamp() with PCIe PTM (Precision Time Measurement) for better time sync - support Credit-Based Shaper (CBS) offload, enabling HW traffic prioritization and bandwidth reservation - Broadcom Ethernet (bnxt) - support pulse-per-second output - support larger Rx rings - Mellanox Ethernet (mlx5) - support ethtool RSS contexts and MQPRIO channel mode - support LAG offload with bridging - support devlink rate limit API - support packet sampling on tunnels - Huawei Ethernet (hns3): - basic devlink support - add extended IRQ coalescing support - report extended link state - Netronome Ethernet (nfp): - add conntrack offload support - Broadcom WiFi (brcmfmac): - add WPA3 Personal with FT to supported cipher suites - support 43752 SDIO device - Intel WiFi (iwlwifi): - support scanning hidden 6GHz networks - support for a new hardware family (Bz) - Xen pv driver: - harden netfront against malicious backends - Qualcomm mobile - ipa: refactor power management and enable automatic suspend - mhi: move MBIM to WWAN subsystem interfaces Refactor: - Ambient BPF run context and cgroup storage cleanup. - Compat rework for ndo_ioctl. Old code removal: - prism54 remove the obsoleted driver, deprecated by the p54 driver. - wan: remove sbni/granch driver" * tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits) net: Add depends on OF_NET for LiteX's LiteETH ipv6: seg6: remove duplicated include net: hns3: remove unnecessary spaces net: hns3: add some required spaces net: hns3: clean up a type mismatch warning net: hns3: refine function hns3_set_default_feature() ipv6: remove duplicated 'net/lwtunnel.h' include net: w5100: check return value after calling platform_get_resource() net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx() net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource() net: mdio-ipq4019: Make use of devm_platform_ioremap_resource() fou: remove sparse errors ipv4: fix endianness issue in inet_rtm_getroute_build_skb() octeontx2-af: Set proper errorcode for IPv4 checksum errors octeontx2-af: Fix static code analyzer reported issues octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg octeontx2-af: Fix loop in free and unmap counter af_unix: fix potential NULL deref in unix_dgram_connect() dpaa2-eth: Replace strlcpy with strscpy octeontx2-af: Use NDC TX for transmit packet data ...
2021-08-30Merge tag 'sched-core-2021-08-30' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: - The biggest change in this cycle is scheduler support for asymmetric scheduling affinity, to support the execution of legacy 32-bit tasks on AArch32 systems that also ha