| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
lock_task_sighand() can trigger a hard lockup. If NR_CPUS threads call
getrusage() at the same time and the process has NR_THREADS, spin_lock_irq
will spin with irqs disabled O(NR_CPUS * NR_THREADS) time.
Change getrusage() to use sig->stats_lock, it was specifically designed
for this type of use. This way it runs lockless in the likely case.
TODO:
- Change do_task_stat() to use sig->stats_lock too, then we can
remove spin_lock_irq(siglock) in wait_task_zombie().
- Turn sig->stats_lock into seqcount_rwlock_t, this way the
readers in the slow mode won't exclude each other. See
https://lore.kernel.org/all/20230913154907.GA26210@redhat.com/
- stats_lock has to disable irqs because ->siglock can be taken
in irq context, it would be very nice to change __exit_signal()
to avoid the siglock->stats_lock dependency.
Link: https://lkml.kernel.org/r/20240122155053.GA26214@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Dylan Hatch <dylanbhatch@google.com>
Tested-by: Dylan Hatch <dylanbhatch@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "getrusage: use sig->stats_lock", v2.
This patch (of 2):
thread_group_cputime() does its own locking, we can safely shift
thread_group_cputime_adjusted() which does another for_each_thread loop
outside of ->siglock protected section.
This is also preparation for the next patch which changes getrusage() to
use stats_lock instead of siglock, thread_group_cputime() takes the same
lock. With the current implementation recursive read_seqbegin_or_lock()
is fine, thread_group_cputime() can't enter the slow mode if the caller
holds stats_lock, yet this looks more safe and better performance-wise.
Link: https://lkml.kernel.org/r/20240122155023.GA26169@redhat.com
Link: https://lkml.kernel.org/r/20240122155050.GA26205@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Dylan Hatch <dylanbhatch@google.com>
Tested-by: Dylan Hatch <dylanbhatch@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
systemd-254 tries to use prctl(PR_SET_MDWE) for it's MemoryDenyWriteExecute
functionality, but fails on parisc which still needs executable stacks in
certain combinations of gcc/glibc/kernel.
Disable prctl(PR_SET_MDWE) by returning -EINVAL for now on parisc, until
userspace has catched up.
Signed-off-by: Helge Deller <deller@gmx.de>
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Sam James <sam@gentoo.org>
Closes: https://github.com/systemd/systemd/issues/29775
Tested-by: Sam James <sam@gentoo.org>
Link: https://lore.kernel.org/all/875y2jro9a.fsf@gentoo.org/
Cc: <stable@vger.kernel.org> # v6.3+
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"As usual, lots of singleton and doubleton patches all over the tree
and there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- 'kdump: use generic functions to simplify crashkernel reservation
in arch', from Baoquan He. This is mainly cleanups and
consolidation of the 'crashkernel=' kernel parameter handling
- After much discussion, David Laight's 'minmax: Relax type checks in
min() and max()' is here. Hopefully reduces some typecasting and
the use of min_t() and max_t()
- A group of patches from Oleg Nesterov which clean up and slightly
fix our handling of reads from /proc/PID/task/... and which remove
task_struct.thread_group"
* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
scripts/gdb/vmalloc: disable on no-MMU
scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
.mailmap: add address mapping for Tomeu Vizoso
mailmap: update email address for Claudiu Beznea
tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
.mailmap: map Benjamin Poirier's address
scripts/gdb: add lx_current support for riscv
ocfs2: fix a spelling typo in comment
proc: test ProtectionKey in proc-empty-vm test
proc: fix proc-empty-vm test with vsyscall
fs/proc/base.c: remove unneeded semicolon
do_io_accounting: use sig->stats_lock
do_io_accounting: use __for_each_thread()
ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
ocfs2: fix a typo in a comment
scripts/show_delta: add __main__ judgement before main code
treewide: mark stuff as __ro_after_init
fs: ocfs2: check status values
proc: test /proc/${pid}/statm
compiler.h: move __is_constexpr() to compiler.h
...
|
|
This extends the current PR_SET_MDWE prctl arg with a bit to indicate that
the process doesn't want MDWE protection to propagate to children.
To implement this no-inherit mode, the tag in current->mm->flags must be
absent from MMF_INIT_MASK. This means that the encoding for "MDWE but
without inherit" is different in the prctl than in the mm flags. This
leads to a bit of bit-mangling in the prctl implementation.
Link: https://lkml.kernel.org/r/20230828150858.393570-6-revest@chromium.org
Signed-off-by: Florent Revest <revest@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alexey Izbyshev <izbyshev@ispras.ru>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ayush Jain <ayush.jain3@amd.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Szabolcs Nagy <Szabolcs.Nagy@arm.com>
Cc: Topi Miettinen <toiwoton@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
do/while_each_thread should be avoided when possible.
Plus this change allows to avoid lock_task_sighand(), we can use rcu
and/or sig->stats_lock instead.
Link: https://lkml.kernel.org/r/20230909172629.GA20454@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
No functional changes, cleanup/preparation.
Link: https://lkml.kernel.org/r/20230909172554.GA20441@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Somehow PR_GET_AUXV got added into PR_MCE_KILL's switch when the patch was
applied [1].
Thus move it out of the switch, to the place the patch added it.
In the recently released v6.4 kernel some user could, in principle, be
already using this feature by mapping the right page and passing the
PR_GET_AUXV constant as a pointer:
prctl(PR_MCE_KILL, PR_GET_AUXV, ...)
So this does change the behavior for users. We could keep the bug since
the other subcases in PR_MCE_KILL (PR_MCE_KILL_CLEAR and PR_MCE_KILL_SET)
do not overlap.
However, v6.4 may be recent enough (2 weeks old) that moving the lines
(rather than just adding a new case) does not break anybody? Moreover,
the documentation in man-pages was just committed today [2].
Link: https://lkml.kernel.org/r/20230708233344.361854-1-ojeda@kernel.org
Fixes: ddc65971bb67 ("prctl: add PR_GET_AUXV to copy auxv to userspace")
Link: https://lore.kernel.org/all/d81864a7f7f43bca6afa2a09fc2e850e4050ab42.1680611394.git.josh@joshtriplett.org/ [1]
Link: https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/commit/?id=8cf0c06bfd3c2b219b044d4151c96f0da50af9ad [2]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This patch add two riscv-specific prctls, to allow usespace control the
use of vector unit:
* PR_RISCV_V_SET_CONTROL: control the permission to use Vector at next,
or all following execve for a thread. Turning off a thread's Vector
live is not possible since libraries may have registered ifunc that
may execute Vector instructions.
* PR_RISCV_V_GET_CONTROL: get the same permission setting for the
current thread, and the setting for following execve(s).
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Vincent Chen <vincent.chen@sifive.com>
Link: https://lore.kernel.org/r/20230605110724.21391-22-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Patch series "mm/ksm: improve PR_SET_MEMORY_MERGE=0 handling and cleanup
disabling KSM", v2.
(1) Make PR_SET_MEMORY_MERGE=0 unmerge pages like setting MADV_UNMERGEABLE
does, (2) add a selftest for it and (3) factor out disabling of KSM from
s390/gmap code.
This patch (of 3):
Let's unmerge any KSM pages when setting PR_SET_MEMORY_MERGE=0, and clear
the VM_MERGEABLE flag from all VMAs -- just like KSM would. Of course,
only do that if we previously set PR_SET_MEMORY_MERGE=1.
Link: https://lkml.kernel.org/r/20230422205420.30372-1-david@redhat.com
Link: https://lkml.kernel.org/r/20230422205420.30372-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Stefan Roesch <shr@devkernel.io>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: process/cgroup ksm support", v9.
So far KSM can only be enabled by calling madvise for memory regions. To
be able to use KSM for more workloads, KSM needs to have the ability to be
enabled / disabled at the process / cgroup level.
Use case 1:
The madvise call is not available in the programming language. An
example for this are programs with forked workloads using a garbage
collected language without pointers. In such a language madvise cannot
be made available.
In addition the addresses of objects get moved around as they are
garbage collected. KSM sharing needs to be enabled "from the outside"
for these type of workloads.
Use case 2:
The same interpreter can also be used for workloads where KSM brings
no benefit or even has overhead. We'd like to be able to enable KSM on
a workload by workload basis.
Use case 3:
With the madvise call sharing opportunities are only enabled for the
current process: it is a workload-local decision. A considerable number
of sharing opportunities may exist across multiple workloads or jobs (if
they are part of the same security domain). Only a higler level entity
like a job scheduler or container can know for certain if its running
one or more instances of a job. That job scheduler however doesn't have
the necessary internal workload knowledge to make targeted madvise
calls.
Security concerns:
In previous discussions security concerns have been brought up. The
problem is that an individual workload does not have the knowledge about
what else is running on a machine. Therefore it has to be very
conservative in what memory areas can be shared or not. However, if the
system is dedicated to running multiple jobs within the same security
domain, its the job scheduler that has the knowledge that sharing can be
safely enabled and is even desirable.
Performance:
Experiments with using UKSM have shown a capacity increase of around 20%.
Here are the metrics from an instagram workload (taken from a machine
with 64GB main memory):
full_scans: 445
general_profit: 20158298048
max_page_sharing: 256
merge_across_nodes: 1
pages_shared: 129547
pages_sharing: 5119146
pages_to_scan: 4000
pages_unshared: 1760924
pages_volatile: 10761341
run: 1
sleep_millisecs: 20
stable_node_chains: 167
stable_node_chains_prune_millisecs: 2000
stable_node_dups: 2751
use_zero_pages: 0
zero_pages_sharing: 0
After the service is running for 30 minutes to an hour, 4 to 5 million
shared pages are common for this workload when using KSM.
Detailed changes:
1. New options for prctl system command
This patch series adds two new options to the prctl system call.
The first one allows to enable KSM at the process level and the second
one to query the setting.
The setting will be inherited by child processes.
With the above setting, KSM can be enabled for the seed process of a cgroup
and all processes in the cgroup will inherit the setting.
2. Changes to KSM processing
When KSM is enabled at the process level, the KSM code will iterate
over all the VMA's and enable KSM for the eligible VMA's.
When forking a process that has KSM enabled, the setting will be
inherited by the new child process.
3. Add general_profit metric
The general_profit metric of KSM is specified in the documentation,
but not calculated. This adds the general profit metric to
/sys/kernel/debug/mm/ksm.
4. Add more metrics to ksm_stat
This adds the process profit metric to /proc/<pid>/ksm_stat.
5. Add more tests to ksm_tests and ksm_functional_tests
This adds an option to specify the merge type to the ksm_tests.
This allows to test madvise and prctl KSM.
It also adds a two new tests to ksm_functional_tests: one to test
the new prctl options and the other one is a fork test to verify that
the KSM process setting is inherited by client processes.
This patch (of 3):
So far KSM can only be enabled by calling madvise for memory regions. To
be able to use KSM for more workloads, KSM needs to have the ability to be
enabled / disabled at the process / cgroup level.
1. New options for prctl system command
This patch series adds two new options to the prctl system call.
The first one allows to enable KSM at the process level and the second
one to query the setting.
The setting will be inherited by child processes.
With the above setting, KSM can be enabled for the seed process of a
cgroup and all processes in the cgroup will inherit the setting.
2. Changes to KSM processing
When KSM is enabled at the process level, the KSM code will iterate
over all the VMA's and enable KSM for the eligible VMA's.
When forking a process that has KSM enabled, the setting will be
inherited by the new child process.
1) Introduce new MMF_VM_MERGE_ANY flag
This introduces the new flag MMF_VM_MERGE_ANY flag. When this flag
is set, kernel samepage merging (ksm) gets enabled for all vma's of a
process.
2) Setting VM_MERGEABLE on VMA creation
When a VMA is created, if the MMF_VM_MERGE_ANY flag is set, the
VM_MERGEABLE flag will be set for this VMA.
3) support disabling of ksm for a process
This adds the ability to disable ksm for a process if ksm has been
enabled for the process with prctl.
4) add new prctl option to get and set ksm for a process
This adds two new options to the prctl system call
- enable ksm for all vmas of a process (if the vmas support it).
- query if ksm has been enabled for a process.
3. Disabling MMF_VM_MERGE_ANY for storage keys in s390
In the s390 architecture when storage keys are used, the
MMF_VM_MERGE_ANY will be disabled.
Link: https://lkml.kernel.org/r/20230418051342.1919757-1-shr@devkernel.io
Link: https://lkml.kernel.org/r/20230418051342.1919757-2-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If a library wants to get information from auxv (for instance,
AT_HWCAP/AT_HWCAP2), it has a few options, none of them perfectly reliable
or ideal:
- Be main or the pre-main startup code, and grub through the stack above
main. Doesn't work for a library.
- Call libc getauxval. Not ideal for libraries that are trying to be
libc-independent and/or don't otherwise require anything from other
libraries.
- Open and read /proc/self/auxv. Doesn't work for libraries that may run
in arbitrarily constrained environments that may not have /proc
mounted (e.g. libraries that might be used by an init program or a
container setup tool).
- Assume you're on the main thread and still on the original stack, and
try to walk the stack upwards, hoping to find auxv. Extremely bad
idea.
- Ask the caller to pass auxv in for you. Not ideal for a user-friendly
library, and then your caller may have the same problem.
Add a prctl that copies current->mm->saved_auxv to a userspace buffer.
Link: https://lkml.kernel.org/r/d81864a7f7f43bca6afa2a09fc2e850e4050ab42.1680611394.git.josh@joshtriplett.org
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Linux Security Modules (LSMs) that implement the "capable" hook will
usually emit an access denial message to the audit log whenever they
"block" the current task from using the given capability based on their
security policy.
The occurrence of a denial is used as an indication that the given task
has attempted an operation that requires the given access permission, so
the callers of functions that perform LSM permission checks must take care
to avoid calling them too early (before it is decided if the permission is
actually needed to perform the requested operation).
The __sys_setres[ug]id() functions violate this convention by first
calling ns_capable_setid() and only then checking if the operation
requires the capability or not. It means that any caller that has the
capability granted by DAC (task's capability set) but not by MAC (LSMs)
will generate a "denied" audit record, even if is doing an operation for
which the capability is not required.
Fix this by reordering the checks such that ns_capable_setid() is checked
last and -EPERM is returned immediately if it returns false.
While there, also do two small optimizations:
* move the capability check before prepare_creds() and
* bail out early in case of a no-op.
Link: https://lkml.kernel.org/r/20230217162154.837549-1-omosnace@redhat.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
|
|
Patch series "mm: In-kernel support for memory-deny-write-execute (MDWE)",
v2.
The background to this is that systemd has a configuration option called
MemoryDenyWriteExecute [2], implemented as a SECCOMP BPF filter. Its aim
is to prevent a user task from inadvertently creating an executable
mapping that is (or was) writeable. Since such BPF filter is stateless,
it cannot detect mappings that were previously writeable but subsequently
changed to read-only. Therefore the filter simply rejects any
mprotect(PROT_EXEC). The side-effect is that on arm64 with BTI support
(Branch Target Identification), the dynamic loader cannot change an ELF
section from PROT_EXEC to PROT_EXEC|PROT_BTI using mprotect(). For
libraries, it can resort to unmapping and re-mapping but for the main
executable it does not have a file descriptor. The original bug report in
the Red Hat bugzilla - [3] - and subsequent glibc workaround for libraries
- [4].
This series adds in-kernel support for this feature as a prctl
PR_SET_MDWE, that is inherited on fork(). The prctl denies PROT_WRITE |
PROT_EXEC mappings. Like the systemd BPF filter it also denies adding
PROT_EXEC to mappings. However unlike the BPF filter it only denies it if
the mapping didn't previous have PROT_EXEC. This allows to PROT_EXEC ->
PROT_EXEC | PROT_BTI with mprotect(), which is a problem with the BPF
filter.
This patch (of 2):
The aim of such policy is to prevent a user task from creating an
executable mapping that is also writeable.
An example of mmap() returning -EACCESS if the policy is enabled:
mmap(0, size, PROT_READ | PROT_WRITE | PROT_EXEC, flags, 0, 0);
Similarly, mprotect() would return -EACCESS below:
addr = mmap(0, size, PROT_READ | PROT_EXEC, flags, 0, 0);
mprotect(addr, size, PROT_READ | PROT_WRITE | PROT_EXEC);
The BPF filter that systemd MDWE uses is stateless, and disallows
mprotect() with PROT_EXEC completely. This new prctl allows PROT_EXEC to
be enabled if it was already PROT_EXEC, which allows the following case:
addr = mmap(0, size, PROT_READ | PROT_EXEC, flags, 0, 0);
mprotect(addr, size, PROT_READ | PROT_EXEC | PROT_BTI);
where PROT_BTI enables branch tracking identification on arm64.
Link: https://lkml.kernel.org/r/20230119160344.54358-1-joey.gouly@arm.com
Link: https://lkml.kernel.org/r/20230119160344.54358-2-joey.gouly@arm.com
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Co-developed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Mark Brown <broonie@kernel.org>
Cc: nd <nd@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Szabolcs Nagy <szabolcs.nagy@arm.com>
Cc: Topi Miettinen <toiwoton@gmail.com>
Cc: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
do_prlimit() adds the user-controlled resource value to a pointer that
will subsequently be dereferenced. In order to help prevent this
codepath from being used as a spectre "gadget" a barrier needs to be
added after checking the range.
Reported-by: Jordy Zomer <jordyzomer@google.com>
Tested-by: Jordy Zomer <jordyzomer@google.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- Huawei reported that when they updated their kernel from 4.4 to
something much newer, some userspace code they had broke, the culprit
being the accidental removal of O_NONBLOCK from /dev/random way back
in 5.6. It's been gone for over 2 years now and this is the first
we've heard of it, but userspace breakage is userspace breakage, so
O_NONBLOCK is now back.
- Use randomness from hardware RNGs much more often during early boot,
at the same interval that crng reseeds are done, from Dominik.
- A semantic change in hardware RNG throttling, so that the hwrng
framework can properly feed random.c with randomness from hardware
RNGs that aren't specifically marked as creditable.
A related patch coming to you via Herbert's hwrng tree depends on
this one, not to compile, but just to function properly, so you may
want to merge this PULL before that one.
- A fix to clamp credited bits from the interrupts pool to the size of
the pool sample. This is mainly just a theoretical fix, as it'd be
pretty hard to exceed it in practice.
- Oracle reported that InfiniBand TCP latency regressed by around
10-15% after a change a few cycles ago made at the request of the RT
folks, in which we hoisted a somewhat rare operation (1 in 1024
times) out of the hard IRQ handler and into a workqueue, a pretty
common and boring pattern.
It turns out, though, that scheduling a worker from there has
overhead of its own, whereas scheduling a timer on that same CPU for
the next jiffy amortizes better and doesn't incur the same overhead.
I also eliminated a cache miss by moving the work_struct (and
subsequently, the timer_list) to below a critical cache line, so that
the more critical members that are accessed on every hard IRQ aren't
split between two cache lines.
- The boot-time initialization of the RNG has been split into two
approximate phases: what we can accomplish before timekeeping is
possible and what we can accomplish after.
This winds up being useful so that we can use RDRAND to seed the RNG
before CONFIG_SLAB_FREELIST_RANDOM=y systems initialize slabs, in
addition to other early uses of randomness. The effect is that
systems with RDRAND (or a bootloader seed) will never see any
warnings at all when setting CONFIG_WARN_ALL_UNSEEDED_RANDOM=y. And
kfence benefits from getting a better seed of its own.
- Small systems without much entropy sometimes wind up putting some
truncated serial number read from flash into hostname, so contribute
utsname changes to the RNG, without crediting.
- Add smaller batches to serve requests for smaller integers, and make
use of them when people ask for random numbers bounded by a given
compile-time constant. This has positive effects all over the tree,
most notably in networking and kfence.
- The original jitter algorithm intended (I believe) to schedule the
timer for the next jiffy, not the next-next jiffy, yet it used
mod_timer(jiffies + 1), which will fire on the next-next jiffy,
instead of what I believe was intended, mod_timer(jiffies), which
will fire on the next jiffy. So fix that.
- Fix a comment typo, from William.
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: clear new batches when bringing new CPUs online
random: fix typos in get_random_bytes() comment
random: schedule jitter credit for next jiffy, not in two jiffies
prandom: make use of smaller types in prandom_u32_max
random: add 8-bit and 16-bit batches
utsname: contribute changes to RNG
random: use init_utsname() instead of utsname()
kfence: use better stack hash seed
random: split initialization into early step and later step
random: use expired timer rather than wq for mixing fast pool
random: avoid reading two cache lines on irq randomness
random: clamp credited irq bits to maximum mixed
random: throttle hwrng writes if no entropy is credited
random: use hwgenerator randomness more frequently at early boot
random: restore O_NONBLOCK support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ucounts update from Eric Biederman:
"Split rlimit and ucount values and max values
After the ucount rlimit code was merged a bunch of small but
siginificant bugs were found and fixed. At the time it was realized
that part of the problem was that while the ucount rlimits were very
similar to the oridinary ucounts (in being nested counts with limits)
the semantics were slightly different and the code would be less error
prone if there was less sharing.
This is the long awaited cleanup that should hopefully keep things
more comprehensible and less error prone for whoever needs to touch
that code next"
* tag 'ucount-rlimits-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ucounts: Split rlimit and ucount values and max values
|
|
On some small machines with little entropy, a quasi-unique hostname is
sometimes a relevant factor. I've seen, for example, 8 character
alpha-numeric serial numbers. In addition, the time at which the hostname
is set is usually a decent measurement of how long early boot took. So,
call add_device_randomness() on new hostnames, which feeds its arguments
to the RNG in addition to a fresh cycle counter.
Low cost hooks like this never hurt and can only ever help, and since
this costs basically nothing for an operation that is never a fast path,
this is an overall easy win.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Since the semantics of maximum rlimit values are different, it would be
better not to mix ucount and rlimit values. This will prevent the error
of using inc_count/dec_ucount for rlimit parameters.
This patch also renames the functions to emphasize the lack of
connection between rlimit and ucount.
v3:
- Fix BUG:KASAN:use-after-free_in_dec_ucount.
v2:
- Fix the array-index-out-of-bounds that was found by the lkp project.
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Link: https://lkml.kernel.org/r/20220518171730.l65lmnnjtnxnftpq@example.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
As for SVE provide a prctl() interface which allows processes to
configure their SME vector length.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-12-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Unnecessarily grabbing the tasklist_lock can be a scalability bottleneck
for workloads that also must grab the tasklist_lock for waiting,
killing, and cloning.
The tasklist_lock was grabbed to protect tsk->sighand from disappearing
(becoming NULL). tsk->signal was already protected by holding a
reference to tsk.
update_rlimit_cpu() assumed tsk->sighand != NULL. With this commit, it
attempts to lock_task_sighand(). However, this means that
update_rlimit_cpu() can fail. This only happens when a task is exiting.
Note that during exec, sighand may *change*, but it will not be NULL.
Prior to this commit, the do_prlimit() ensured that update_rlimit_cpu()
would not fail by read locking the tasklist_lock and checking tsk->sighand
!= NULL.
If update_rlimit_cpu() fails, there may be other tasks that are not
exiting that share tsk->signal. However, the group_leader is the last
task to be released, so if we cannot update_rlimit_cpu(group_leader),
then the entire process is exiting.
The only other caller of update_rlimit_cpu() is
selinux_bprm_committing_creds(). It has tsk == current, so
update_rlimit_cpu() cannot fail (current->sighand cannot disappear
until current exits).
This change resulted in a 14% speedup on a microbenchmark where parents
kill and wait on their children, and children getpriority, setpriority,
and getrlimit.
Signed-off-by: Barret Rhoden <brho@google.com>
Link: https://lkml.kernel.org/r/20220106172041.522167-4-brho@google.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
There are no other callers in the kernel.
Fixed up a comment format and whitespace issue when moving do_prlimit()
higher in sys.c.
Signed-off-by: Barret Rhoden <brho@google.com>
Link: https://lkml.kernel.org/r/20220106172041.522167-3-brho@google.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Avoid mixing strings and their anon_vma_name referenced pointers by
using struct anon_vma_name whenever possible. This simplifies the code
and allows easier sharing of anon_vma_name structures when they
represent the same name.
[surenb@google.com: fix comment]
Link: https://lkml.kernel.org/r/20220223153613.835563-1-surenb@google.com
Link: https://lkml.kernel.org/r/20220224231834.1481408-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Colin Cross <ccross@google.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Alexey Gladkov <legion@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Chris Hyser <chris.hyser@oracle.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Xiaofeng Cao <caoxiaofeng@yulong.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
During set*id() which cred->ucounts to charge the the current process
to is not known until after set_cred_ucounts. So move the
RLIMIT_NPROC checking into a new helper flag_nproc_exceeded and call
flag_nproc_exceeded after set_cred_ucounts.
This is very much an arbitrary subset of the places where we currently
change the RLIMIT_NPROC accounting, designed to preserve the existing
logic.
Fixing the existing logic will be the subject of another series of
changes.
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20220216155832.680775-4-ebiederm@xmission.com
Fixes: 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
set_user
Solar Designer <solar@openwall.com> wrote:
> I'm not aware of anyone actually running into this issue and reporting
> it. The systems that I personally know use suexec along with rlimits
> still run older/distro kernels, so would not yet be affected.
>
> So my mention was based on my understanding of how suexec works, and
> code review. Specifically, Apache httpd has the setting RLimitNPROC,
> which makes it set RLIMIT_NPROC:
>
> https://httpd.apache.org/docs/2.4/mod/core.html#rlimitnproc
>
> The above documentation for it includes:
>
> "This applies to processes forked from Apache httpd children servicing
> requests, not the Apache httpd children themselves. This includes CGI
> scripts and SSI exec commands, but not any processes forked from the
> Apache httpd parent, such as piped logs."
>
> In code, there are:
>
> ./modules/generators/mod_cgid.c: ( (cgid_req.limits.limit_nproc_set) && ((rc = apr_procattr_limit_set(procattr, APR_LIMIT_NPROC,
> ./modules/generators/mod_cgi.c: ((rc = apr_procattr_limit_set(procattr, APR_LIMIT_NPROC,
> ./modules/filters/mod_ext_filter.c: rv = apr_procattr_limit_set(procattr, APR_LIMIT_NPROC, conf->limit_nproc);
>
> For example, in mod_cgi.c this is in run_cgi_child().
>
> I think this means an httpd child sets RLIMIT_NPROC shortly before it
> execs suexec, which is a SUID root program. suexec then switches to the
> target user and execs the CGI script.
>
> Before 2863643fb8b9, the setuid() in suexec would set the flag, and the
> target user's process count would be checked against RLIMIT_NPROC on
> execve(). After 2863643fb8b9, the setuid() in suexec wouldn't set the
> flag because setuid() is (naturally) called when the process is still
> running as root (thus, has those limits bypass capabilities), and
> accordingly execve() would not check the target user's process count
> against RLIMIT_NPROC.
In commit 2863643fb8b9 ("set_user: add capability check when
rlimit(RLIMIT_NPROC) exceeds") capable calls were added to set_user to
make it more consistent with fork. Unfortunately because of call site
differences those capable calls were checking the credentials of the
user before set*id() instead of after set*id().
This breaks enforcement of RLIMIT_NPROC for applications that set the
rlimit and then call set*id() while holding a full set of
capabilities. The capabilities are only changed in the new credential
in security_task_fix_setuid().
The code in apache suexec appears to follow this pattern.
Commit 909cc4ae86f3 ("[PATCH] Fix two bugs with process limits
(RLIMIT_NPROC)") where this check was added describes the targes of this
capability check as:
2/ When a root-owned process (e.g. cgiwrap) sets up process limits and then
calls setuid, the setuid should fail if the user would then be running
more than rlim_cur[RLIMIT_NPROC] processes, but it doesn't. This patch
adds an appropriate test. With this patch, and per-user process limit
imposed in cgiwrap really works.
So the original use case of this check also appears to match the broken
pattern.
Restore the enforcement of RLIMIT_NPROC by removing the bad capable
checks added in set_user. This unfortunately restores the
inconsistent state the code has been in for the last 11 years, but
dealing with the inconsistencies looks like a larger problem.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20210907213042.GA22626@openwall.com/
Link: https://lkml.kernel.org/r/20220212221412.GA29214@openwall.com
Link: https://lkml.kernel.org/r/20220216155832.680775-1-ebiederm@xmission.com
Fixes: 2863643fb8b9 ("set_user: add capability check when rlimit(RLIMIT_NPROC) exceeds")
History-Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Reviewed-by: Solar Designer <solar@openwall.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Merge more updates from Andrew Morton:
"55 patches.
Subsystems affected by this patch series: percpu, procfs, sysctl,
misc, core-kernel, get_maintainer, lib, checkpatch, binfmt, nilfs2,
hfs, fat, adfs, panic, delayacct, kconfig, kcov, and ubsan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (55 commits)
lib: remove redundant assignment to variable ret
ubsan: remove CONFIG_UBSAN_OBJECT_SIZE
kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR
lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB
btrfs: use generic Kconfig option for 256kB page size limit
arch/Kconfig: split PAGE_SIZE_LESS_THAN_256KB from PAGE_SIZE_LESS_THAN_64KB
configs: introduce debug.config for CI-like setup
delayacct: track delays from memory compact
Documentation/accounting/delay-accounting.rst: add thrashing page cache and direct compact
delayacct: cleanup flags in struct task_delay_info and functions use it
delayacct: fix incomplete disable operation when switch enable to disable
delayacct: support swapin delay accounting for swapping without blkio
panic: remove oops_id
panic: use error_report_end tracepoint on warnings
fs/adfs: remove unneeded variable make code cleaner
FAT: use io_schedule_timeout() instead of congestion_wait()
hfsplus: use struct_group_attr() for memcpy() region
nilfs2: remove redundant pointer sbufs
fs/binfmt_elf: use PT_LOAD p_align values for static PIE
const_structs.checkpatch: add frequently used ops structs
...
|
|
PRIO_PGRP needs the tasklist_lock mainly to serialize vs setpgid(2), to
protect against any concurrent change_pid(PIDTYPE_PGID) that can move
the task from one hlist to another while iterating.
However, the remaining can only rely only on RCU:
PRIO_PROCESS only does the task lookup and never iterates over tasklist
and we already have an rcu-aware stable pointer.
PRIO_USER is already racy vs setuid(2) so with creds being rcu
protected, we can end up seeing stale data. When removing the
tasklist_lock there can be a race with (i) fork but this is benign as
the child's nice is inherited and the new task is not observable by the
user yet either, hence the return semantics do not differ. And (ii) a
race with exit, which is a small window and can cause us to miss a task
which was removed from the list and it had the highest nice.
Similarly change the buggy do_each_thread/while_each_thread combo in
PRIO_USER for the rcu-safe for_each_process_thread flavor, which doesn't
make use of next_thread/p->thread_group.
[akpm@linux-foundation.org: coding style fixes]
Link: https://lkml.kernel.org/r/20211210182250.43734-1-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In many userspace applications, and especially in VM based applications
like Android uses heavily, there are multiple different allocators in
use. At a minimum there is libc malloc and the stack, and in many cases
there are libc malloc, the stack, direct syscalls to mmap anonymous
memory, and multiple VM heaps (one for small objects, one for big
objects, etc.). Each of these layers usually has its own tools to
inspect its usage; malloc by compiling a debug vers |
