| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
posix_cpu_timer_del()
If an exiting non-autoreaping task has already passed exit_notify() and
calls handle_posix_cpu_timers() from IRQ, it can be reaped by its parent
or debugger right after unlock_task_sighand().
If a concurrent posix_cpu_timer_del() runs at that moment, it won't be
able to detect timer->it.cpu.firing != 0: cpu_timer_task_rcu() and/or
lock_task_sighand() will fail.
Add the tsk->exit_state check into run_posix_cpu_timers() to fix this.
This fix is not needed if CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y, because
exit_task_work() is called before exit_notify(). But the check still
makes sense, task_work_add(&tsk->posix_cputimers_work.work) will fail
anyway in this case.
Cc: stable@vger.kernel.org
Reported-by: Benoît Sevens <bsevens@google.com>
Fixes: 0bdd2ed4138e ("sched: run_posix_cpu_timers: Don't check ->exit_state, use lock_task_sighand()")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
"Updates for the time/timer core code:
- Rework the initialization of the posix-timer kmem_cache and move
the cache pointer into the timer_data structure to prevent false
sharing
- Switch the alarmtimer code to lock guards
- Improve the CPU selection criteria in the per CPU validation of the
clocksource watchdog to avoid arbitrary selections (or omissions)
on systems with a small number of CPUs
- The usual cleanups and improvements"
* tag 'timers-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/nohz: Remove unused tick_nohz_full_add_cpus_to()
clocksource: Fix the CPUs' choice in the watchdog per CPU verification
alarmtimer: Switch spin_{lock,unlock}_irqsave() to guards
alarmtimer: Remove dead return value in clock2alarm()
time/jiffies: Change register_refined_jiffies() to void __init
timers: Remove unused __round_jiffies(_up)
posix-timers: Initialize cache early and move pointer into __timer_data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"Another set of timer API cleanups:
- Convert init_timer*(), try_to_del_timer_sync() and
destroy_timer_on_stack() over to the canonical timer_*()
namespace convention.
There is another large conversion pending, which has not been included
because it would have caused a gazillion of merge conflicts in next.
The conversion scripts will be run towards the end of the merge window
and a pull request sent once all conflict dependencies have been
merged"
* tag 'timers-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename destroy_timer_on_stack() as timer_destroy_on_stack()
treewide, timers: Rename try_to_del_timer_sync() as timer_delete_sync_try()
timers: Rename init_timers() as timers_init()
timers: Rename NEXT_TIMER_MAX_DELTA as TIMER_NEXT_MAX_DELTA
timers: Rename __init_timer_on_stack() as __timer_init_on_stack()
timers: Rename __init_timer() as __timer_init()
timers: Rename init_timer_on_stack_key() as timer_init_key_on_stack()
timers: Rename init_timer_key() as timer_init_key()
|
|
Right now, if the clocksource watchdog detects a clocksource skew, it might
perform a per CPU check, for example in the TSC case on x86. In other
words: supposing TSC is detected as unstable by the clocksource watchdog
running at CPU1, as part of marking TSC unstable the kernel will also run a
check of TSC readings on some CPUs to be sure it is synced between them
all.
But that check happens only on some CPUs, not all of them; this choice is
based on the parameter "verify_n_cpus" and in some random cpumask
calculation. So, the watchdog runs such per CPU checks on up to
"verify_n_cpus" random CPUs among all online CPUs, with the risk of
repeating CPUs (that aren't double checked) in the cpumask random
calculation.
But if "verify_n_cpus" > num_online_cpus(), it should skip the random
calculation and just go ahead and check the clocksource sync between
all online CPUs, without the risk of skipping some CPUs due to
duplicity in the random cpumask calculation.
Tests in a 4 CPU laptop with TSC skew detected led to some cases of the per
CPU verification skipping some CPU even with verify_n_cpus=8, due to the
duplicity on random cpumask generation. Skipping the randomization when the
number of online CPUs is smaller than verify_n_cpus, solves that.
Suggested-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/all/20250323173857.372390-1-gpiccoli@igalia.com
|
|
Move this API to the canonical timer_*() namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-10-mingo@kernel.org
|
|
Move this API to the canonical timer_*() namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-9-mingo@kernel.org
|
|
Move this API to the canonical timers_*() namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-8-mingo@kernel.org
|
|
Move this macro to the canonical TIMER_* namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-7-mingo@kernel.org
|
|
Move this API to the canonical timer_*() namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-4-mingo@kernel.org
|
|
Move this API to the canonical timer_*() namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-3-mingo@kernel.org
|
|
Using guard/scoped_guard() to simplify code. Using guard() to remove
'goto unlock' label is neater especially.
[ tglx: Brought back the scoped_guard()'s which were dropped in v2 and
simplified alarmtimer_rtc_add_device() ]
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20250430032734.2079290-4-suhui@nfschina.com
|
|
'clockid' can only be ALARM_REALTIME and ALARM_BOOTTIME. It's impossible to
return -1 and callers never check the return value.
Only alarm_clock_get_timespec(), alarm_clock_get_ktime(),
alarm_timer_create() and alarm_timer_nsleep() call clock2alarm(). These
callers use clockid_to_kclock() to get 'struct k_clock', which ensures
that clock2alarm() never returns -1.
Remove the impossible -1 return value, and add a warning to notify about any
future misuse of this function.
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250430032734.2079290-3-suhui@nfschina.com
|
|
register_refined_jiffies() is only used in setup code and always returns 0.
Mark it as __init to save some bytes and change it to void.
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250430032734.2079290-2-suhui@nfschina.com
|
|
Lei Chen raised an issue with CLOCK_MONOTONIC_COARSE seeing time
inconsistencies. Lei tracked down that this was being caused by the
adjustment:
tk->tkr_mono.xtime_nsec -= offset;
which is made to compensate for the unaccumulated cycles in offset when the
multiplicator is adjusted forward, so that the non-_COARSE clockids don't
see inconsistencies.
However, the _COARSE clockid getter functions use the adjusted xtime_nsec
value directly and do not compensate the negative offset via the
clocksource delta multiplied with the new multiplicator. In that case the
caller can observe time going backwards in consecutive calls.
By design, this negative adjustment should be fine, because the logic run
from timekeeping_adjust() is done after it accumulated approximately
multiplicator * interval_cycles
into xtime_nsec. The accumulated value is always larger then the
mult_adj * offset
value, which is subtracted from xtime_nsec. Both operations are done
together under the tk_core.lock, so the net change to xtime_nsec is always
always be positive.
However, do_adjtimex() calls into timekeeping_advance() as well, to
apply the NTP frequency adjustment immediately. In this case,
timekeeping_advance() does not return early when the offset is smaller
then interval_cycles. In that case there is no time accumulated into
xtime_nsec. But the subsequent call into timekeeping_adjust(), which
modifies the multiplicator, subtracts from xtime_nsec to correct for the
new multiplicator.
Here because there was no accumulation, xtime_nsec becomes smaller than
before, which opens a window up to the next accumulation, where the
_COARSE clockid getters, which don't compensate for the offset, can
observe the inconsistency.
This has been tried to be fixed by forwarding the timekeeper in the case
that adjtimex() adjusts the multiplier, which resets the offset to zero:
757b000f7b93 ("timekeeping: Fix possible inconsistencies in _COARSE clockids")
That works correctly, but unfortunately causes a regression on the
adjtimex() side. There are two issues:
1) The forwarding of the base time moves the update out of the original
period and establishes a new one.
2) The clearing of the accumulated NTP error is changing the behaviour as
well.
User-space expects that multiplier/frequency updates are in effect, when the
syscall returns, so delaying the update to the next tick is not solving the
problem either.
Commit 757b000f7b93 was reverted so that the established expectations of
user space implementations (ntpd, chronyd) are restored, but that obviously
brought the inconsistencies back.
One of the initial approaches to fix this was to establish a separate
storage for the coarse time getter nanoseconds part by calculating it from
the offset. That was dropped on the floor because not having yet another
state to maintain was simpler. But given the result of the above exercise,
this solution turns out to be the right one. Bring it back in a slightly
modified form.
Thus introduce timekeeper::coarse_nsec and store that nanoseconds part in
it, switch the time getter functions and the VDSO update to use that value.
coarse_nsec is set on operations which forward or initialize the timekeeper
and after time was accumulated during a tick. If there is no accumulation
the timestamp is unchanged.
This leaves the adjtimex() behaviour unmodified and prevents coarse time
from going backwards.
[ jstultz: Simplified the coarse_nsec calculation and kept behavior so
coarse clockids aren't adjusted on each inter-tick adjtimex
call, slightly reworked the comments and commit message ]
Fixes: da15cfdae033 ("time: Introduce CLOCK_REALTIME_COARSE")
Reported-by: Lei Chen <lei.chen@smartx.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/20250419054706.2319105-1-jstultz@google.com
Closes: https://lore.kernel.org/lkml/20250310030004.3705801-1-lei.chen@smartx.com/
|
|
Remove two trivial but long unused functions.
__round_jiffies() has been unused since 2008's
commit 9c133c469d38 ("Add round_jiffies_up and related routines")
__round_jiffies_up() has been unused since 2019's
commit 7ae3f6e130e8 ("powerpc/watchdog: Use hrtimers for per-CPU
heartbeat")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250418200803.427911-1-linux@treblig.org
|
|
tick_freeze() acquires a raw spinlock (tick_freeze_lock). Later in the
callchain (timekeeping_suspend() -> mc146818_avoid_UIP()) the RTC driver
acquires a spinlock which becomes a sleeping lock on PREEMPT_RT. Lockdep
complains about this lock nesting.
Add a lockdep override for this special case and a comment explaining
why it is okay.
Reported-by: Borislav Petkov <bp@alien8.de>
Reported-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250404133429.pnAzf-eF@linutronix.de
Closes: https://lore.kernel.org/all/20250330113202.GAZ-krsjAnurOlTcp-@fat_crate.local/
Closes: https://lore.kernel.org/all/CAP-bSRZ0CWyZZsMtx046YV8L28LhY0fson2g4EqcwRAVN1Jk+Q@mail.gmail.com/
|
|
Move posix_timers_cache initialization to posixtimer_init(). At that point
the memory subsystem is already up and running.
Also move the cache pointer to the __timer_data variable to avoid
potential false sharing, since it never was marked as __ro_after_init.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250402133114.253901-1-edumazet@google.com
|
|
The "function" field of struct hrtimer has been changed to private, but
two instances have not been converted to use ACCESS_PRIVATE().
Convert them to use ACCESS_PRIVATE().
Fixes: 04257da0c99c ("hrtimers: Make callback function pointer private")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250408103854.1851093-1-namcao@linutronix.de
Closes: https://lore.kernel.org/oe-kbuild-all/202504071931.vOVl13tt-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202504072155.5UAZjYGU-lkp@intel.com/
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A set of final cleanups for the timer subsystem:
- Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
- The final cleanup of the hrtimer_init() to hrtimer_setup()
conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline
and all new users are catched.
Doing this right before rc1 ensures that new code which is merged post
rc1 is not introducing new instances of the original functionality"
* tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracing/timers: Rename the hrtimer_init event to hrtimer_setup
hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack()
hrtimers: Rename debug_init() to debug_setup()
hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper()
hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns()
hrtimers: Make callback function pointer private
hrtimers: Merge __hrtimer_init() into __hrtimer_setup()
hrtimers: Switch to use __htimer_setup()
hrtimers: Delete hrtimer_init()
treewide: Convert new and leftover hrtimer_init() users
treewide: Switch/rename to timer_delete[_sync]()
|
|
The function hrtimer_init() doesn't exist anymore. It was replaced by
hrtimer_setup().
Thus, rename the hrtimer_init trace event to hrtimer_setup to keep it
consistent.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/cba84c3d853c5258aa3a262363a6eac08e2c7afc.1738746927.git.namcao@linutronix.de
|
|
All the hrtimer_init*() functions have been renamed to hrtimer_setup*().
Rename debug_init_on_stack() to debug_setup_on_stack() as well, to keep the
names consistent.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/073cf6162779a2f5b12624677d4c49ee7eccc1ed.1738746927.git.namcao@linutronix.de
|
|
All the hrtimer_init*() functions have been renamed to hrtimer_setup*().
Rename debug_init() to debug_setup() as well, to keep the names consistent.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/4b730c1f79648b16a1c5413f928fdc2e138dfc43.1738746927.git.namcao@linutronix.de
|
|
All the hrtimer_init*() functions have been renamed to hrtimer_setup*().
Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper() as well, to
keep the names consistent.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/807694aedad9353421c4a7347629a30c5c31026f.1738746927.git.namcao@linutronix.de
|
|
The struct hrtimer::function field can only be changed using
hrtimer_setup*() or hrtimer_update_function(), and both already null-check
'function'. Therefore, null-checking 'function' in hrtimer_start_range_ns()
is not necessary.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/4661c571ee87980c340ccc318fc1a473c0c8f6bc.1738746927.git.namcao@linutronix.de
|
|
Make the struct hrtimer::function field private, to prevent users from
changing this field in an unsafe way. hrtimer_update_function() should be
used if the callback function needs to be changed.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/7d0e6e0c5c59a64a9bea940051aac05d750bc0c2.1738746927.git.namcao@linutronix.de
|
|
__hrtimer_init() is only called by __hrtimer_setup(). Simplify by merging
__hrtimer_init() into __hrtimer_setup().
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/8a0a847a35f711f66b2d05b57255aa44e7e61279.1738746927.git.namcao@linutronix.de
|
|
__hrtimer_init_sleeper() calls __hrtimer_init() and also sets up the
callback function. But there is already __hrtimer_setup() which does both
actions.
Switch to use __hrtimer_setup() to simplify the code.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/d9a45a51b6a8aa0045310d63f73753bf6b33f385.1738746927.git.namcao@linutronix.de
|
|
hrtimer_init() is now unused. Delete it.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/003722f60c7a2a4f8d4ed24fb741aa313b7e5136.1738746927.git.namcao@linutronix.de
|
|
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This reverts commit 757b000f7b936edf79311ab0971fe465bbda75ea.
Miroslav reported that the changes for handling the inconsistencies in the
coarse time getters result in a regression on the adjtimex() side.
There are two issues:
1) The forwarding of the base time moves the update out of the original
period and establishes a new one.
2) The clearing of the accumulated NTP error is changing the behaviour as
well.
Userspace expects that multiplier/frequency updates are in effect, when the
syscall returns, so delaying the update to the next tick is not solving the
problem either.
Revert the change, so that the established expectations of user space
implementations (ntpd, chronyd) are restored. The re-introduced
inconsistency of the coarse time getters will be addressed in a subsequent
fix.
Fixes: 757b000f7b93 ("timekeeping: Fix possible inconsistencies in _COARSE clockids")
Reported-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/Z-qsg6iDGlcIJulJ@localhost
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls)
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked) in
BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream
performance up to 2x.
- Improve performance of contended connect() by 200% by searching for
an available 4-tuple under RCU rather than a spin lock. Bring an
additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles. There are up to 4
namespace roles but we used to have just 2 netns pointer arguments,
interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout in
TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin
users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a
module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar to
normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name to
messages as metadata
Driver API:
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where
possible. Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers:
- Remove the IBM LCS driver for s390
- Remove the sb1000 cable modem driver
- Add support for SFP module access over SMBus
- Add MCTP transport driver for MCTP-over-USB
- Enable XDP metadata support in multiple drivers
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD
platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96%
with 1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused
cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at
runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7"
* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits)
unix: fix up for "apparmor: add fine grained af_unix mediation"
mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
net: usb: asix: ax88772: Increase phy_name size
net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string
net: libwx: fix Tx L4 checksum
net: libwx: fix Tx descriptor content for some tunnel packets
atm: Fix NULL pointer dereference
net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards
net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card
net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus
net: phy: aquantia: add essential functions to aqr105 driver
net: phy: aquantia: search for firmware-name in fwnode
net: phy: aquantia: add probe function to aqr105 for firmware loading
net: phy: Add swnode support to mdiobus_scan
gve: add XDP DROP and PASS support for DQ
gve: update XDP allocation path support RX buffer posting
gve: merge packet buffer size fields
gve: update GQ RX to use buf_size
gve: introduce config-based allocation for XDP
gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO infrastructure updates from Thomas Gleixner:
- Consolidate the VDSO storage
The VDSO data storage and data layout has been largely architecture
specific for historical reasons. That increases the maintenance
effort and causes inconsistencies over and over.
There is no real technical reason for architecture specific layouts
and implementations. The architecture specific details can easily be
integrated into a generic layout, which also reduces the amount of
duplicated code for managing the mappings.
Convert all architectures over to a unified layout and common mapping
infrastructure. This splits the VDSO data layout into subsystem
specific blocks, timekeeping, random and architecture parts, which
provides a better structure and allows to improve and update the
functionalities without conflict and interaction.
- Rework the timekeeping data storage
The current implementation is designed for exposing system
timekeeping accessors, which was good enough at the time when it was
designed.
PTP and Time Sensitive Networking (TSN) change that as there are
requirements to expose independent PTP clocks, which are not related
to system timekeeping.
Replace the monolithic data storage by a structured layout, which
allows to add support for independent PTP clocks on top while reusing
both the data structures and the time accessor implementations.
* tag 'timers-vdso-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
sparc/vdso: Always reject undefined references during linking
x86/vdso: Always reject undefined references during linking
vdso: Rework struct vdso_time_data and introduce struct vdso_clock
vdso: Move architecture related data before basetime data
powerpc/vdso: Prepare introduction of struct vdso_clock
arm64/vdso: Prepare introduction of struct vdso_clock
x86/vdso: Prepare introduction of struct vdso_clock
time/namespace: Prepare introduction of struct vdso_clock
vdso/namespace: Rename timens_setup_vdso_data() to reflect new vdso_clock struct
vdso/vsyscall: Prepare introduction of struct vdso_clock
vdso/gettimeofday: Prepare helper functions for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare introduction of struct vdso_clock
vdso/helpers: Prepare introduction of struct vdso_clock
vdso/datapage: Define vdso_clock to prepare for multiple PTP clocks
vdso: Make vdso_time_data cacheline aligned
arm64: Make asm/cache.h compatible with vDSO
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
- Fix a memory ordering issue in posix-timers
Posix-timer lookup is lockless and reevaluates the timer validity
under the timer lock, but the update which validates the timer is not
protected by the timer lock. That allows the store to be reordered
against the initialization stores, so that the lookup side can
observe a partially initialized timer. That's mostly a theoretical
problem, but incorrect nevertheless.
- Fix a long standing inconsistency of the coarse time getters
The coarse time getters read the base time of the current update
cycle without reading the actual hardware clock. NTP frequency
adjustment can set the base time backwards. The fine grained
interfaces compensate this by reading the clock and applying the new
conversion factor, but the coarse grained time getters use the base
time directly. That allows the user to observe time going backwards.
Cure it by always forwarding base time, when NTP changes the
frequency with an immediate step.
- Rework of posix-timer hashing
The posix-timer hash is not scalable and due to the CRIU timer
restore mechanism prone to massive contention on the global hash
bucket lock.
Replace the global hash lock with a fine grained per bucket locking
scheme to address that.
- Rework the proc/$PID/timers interface.
/proc/$PID/timers is provided for CRIU to be able to restore a timer.
The printout happens with sighand lock held and interrupts disabled.
That's not required as this can be done with RCU protection as well.
- Provide a sane mechanism for CRIU to restore a timer ID
CRIU restores timers by creating and deleting them until the kernel
internal per process ID counter reached the requested ID. That's
horribly slow for sparse timer IDs.
Provide a prctl() which allows CRIU to restore a timer with a given
ID. When enabled the ID pointer is used as input pointer to read the
requested ID from user space. When disabled, the normal allocation
scheme (next ID) is active as before. This is backwards compatible
for both kernel and user space.
- Make hrtimer_update_function() less expensive.
The sanity checks are valuable, but expensive for high frequency
usage in io/uring. Make the debug checks conditional and enable them
only when lockdep is enabled.
- Small updates, cleanups and improvements
* tag 'timers-core-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
selftests/timers: Improve skew_consistency by testing with other clockids
timekeeping: Fix possible inconsistencies in _COARSE clockids
posix-timers: Drop redundant memset() invocation
selftests/timers/posix-timers: Add a test for exact allocation mode
posix-timers: Provide a mechanism to allocate a given timer ID
posix-timers: Dont iterate /proc/$PID/timers with sighand:: Siglock held
posix-timers: Make per process list RCU safe
posix-timers: Avoid false cacheline sharing
posix-timers: Switch to jhash32()
posix-timers: Improve hash table performance
posix-timers: Make signal_struct:: Next_posix_timer_id an atomic_t
posix-timers: Make lock_timer() use guard()
posix-timers: Rework timer removal
posix-timers: Simplify lock/unlock_timer()
posix-timers: Use guards in a few places
posix-timers: Remove SLAB_PANIC from kmem cache
posix-timers: Remove a few paranoid warnings
posix-timers: Cleanup includes
posix-timers: Add cond_resched() to posix_timer_add() search loop
posix-timers: Initialise timer before adding it to the hash table
...
|
|
CONFIG_TRACE_BRANCH_PROFILING inserts a call to ftrace_likely_update()
for each use of likely() or unlikely(). That breaks noinstr rules if
the affected function is annotated as noinstr.
Disable branch profiling for files with noinstr functions. In addition
to some individual files, this also includes the entire arch/x86
subtree, as well as the kernel/entry, drivers/cpuidle, and drivers/idle
directories, all of which are noinstr-heavy.
Due to the nature of how sched binaries are built by combining multiple
.c files into one, branch profiling is disabled more broadly across the
sched code than would otherwise be needed.
This fixes many warnings like the following:
vmlinux.o: warning: objtool: do_syscall_64+0x40: call to ftrace_likely_update() leaves .noinstr.text section
vmlinux.o: warning: objtool: __rdgsbase_inactive+0x33: call to ftrace_likely_update() leaves .noinstr.text section
vmlinux.o: warning: objtool: handle_bug.isra.0+0x198: call to ftrace_likely_update() leaves .noinstr.text section
...
Reported-by: Ingo Molnar <mingo@kernel.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/fb94fc9303d48a5ed370498f54500cc4c338eb6d.1742586676.git.jpoimboe@kernel.org
|
|
Lei Chen raised an issue with CLOCK_MONOTONIC_COARSE seeing time
inconsistencies.
Lei tracked down that this was being caused by the adjustment
tk->tkr_mono.xtime_nsec -= offset;
which is made to compensate for the unaccumulated cycles in offset when the
multiplicator is adjusted forward, so that the non-_COARSE clockids don't
see inconsistencies.
However, the _COARSE clockid getter functions use the adjusted xtime_nsec
value directly and do not compensate the negative offset via the
clocksource delta multiplied with the new multiplicator. In that case the
caller can observe time going backwards in consecutive calls.
By design, this negative adjustment should be fine, because the logic run
from timekeeping_adjust() is done after it accumulated approximately
multiplicator * interval_cycles
into xtime_nsec. The accumulated value is always larger then the
mult_adj * offset
value, which is subtracted from xtime_nsec. Both operations are done
together under the tk_core.lock, so the net change to xtime_nsec is always
always be positive.
However, do_adjtimex() calls into timekeeping_advance() as well, to to
apply the NTP frequency adjustment immediately. In this case,
timekeeping_advance() does not return early when the offset is smaller then
interval_cycles. In that case there is no time accumulated into
xtime_nsec. But the subsequent call into timekeeping_adjust(), which
modifies the multiplicator, subtracts from xtime_nsec to correct
for the new multiplicator.
Here because there was no accumulation, xtime_nsec becomes smaller than
before, which opens a window up to the next accumulation, where the _COARSE
clockid getters, which don't compensate for the offset, can observe the
inconsistency.
To fix this, rework the timekeeping_advance() logic so that when invoked
from do_adjtimex(), the time is immediately forwarded to accumulate also
the sub-interval portion into xtime. That means the remaining offset
becomes zero and the subsequent multiplier adjustment therefore does not
modify xtime_nsec.
There is another related inconsistency. If xtime is forwarded due to the
instantaneous multiplier adjustment, the NTP error, which was accumulated
with the previous setting, becomes meaningless.
Therefore clear the NTP error as well, after forwarding the clock for the
instantaneous multiplier update.
Fixes: da15cfdae033 ("time: Introduce CLOCK_REALTIME_COARSE")
Reported-by: Lei Chen <lei.chen@smartx.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250320200306.1712599-1-jstultz@google.com
Closes: https://lore.kernel.org/lkml/20250310030004.3705801-1-lei.chen@smartx.com/
|
|
Initially in commit 6891c4509c79 memset() was required to clear a variable
allocated on stack. Commit 2482097c6c0f removed the on stack variable and
retained the memset() despite the fact that the memory is allocated via
kmem_cache_zalloc() and therefore zereoed already.
Drop the redundant memset().
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/Z9ctVxwaYOV4A2g4@grain
|
