| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit eb7024bfcc5f68ed11ed9dd4891a3073c15f04a8 ]
kprobe.multi programs run in atomic/RCU context and cannot sleep.
However, bpf_kprobe_multi_link_attach() did not validate whether the
program being attached had the sleepable flag set, allowing sleepable
helpers such as bpf_copy_from_user() to be invoked from a non-sleepable
context.
This causes a "sleeping function called from invalid context" splat:
BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:169
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1787, name: sudo
preempt_count: 1, expected: 0
RCU nest depth: 2, expected: 0
Fix this by rejecting sleepable programs early in
bpf_kprobe_multi_link_attach(), before any further processing.
Fixes: 0dcac2725406 ("bpf: Add multi kprobe link")
Signed-off-by: Varun R Mallya <varunrmallya@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260401191126.440683-1-varunrmallya@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 1f9885732248d22f788e4992c739a98c88ab8a55 upstream.
The following sequence may leads deadlock in cpu hotplug:
task1 task2 task3
----- ----- -----
mutex_lock(&interface_lock)
[CPU GOING OFFLINE]
cpus_write_lock();
osnoise_cpu_die();
kthread_stop(task3);
wait_for_completion();
osnoise_sleep();
mutex_lock(&interface_lock);
cpus_read_lock();
[DEAD LOCK]
Fix by swap the order of cpus_read_lock() and mutex_lock(&interface_lock).
Cc: stable@vger.kernel.org
Cc: <mathieu.desnoyers@efficios.com>
Cc: <zhang.run@zte.com.cn>
Cc: <yang.tao172@zte.com.cn>
Cc: <ran.xiaokai@zte.com.cn>
Fixes: bce29ac9ce0bb ("trace: Add osnoise tracer")
Link: https://patch.msgid.link/20260326141953414bVSj33dAYktqp9Oiyizq8@zte.com.cn
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Luo Haiyang <luo.haiyang@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 250ab25391edeeab8462b68be42e4904506c409c upstream.
Boot-time trigger registration can fail before the trigger-data cleanup
kthread exists. Deferring those frees until late init is fine, but the
post-boot fallback must still drain the deferred list if kthread
creation never succeeds.
Otherwise, boot-deferred nodes can accumulate on
trigger_data_free_list, later frees fall back to synchronously freeing
only the current object, and the older queued entries are leaked
forever.
To trigger this, add the following to the kernel command line:
trace_event=sched_switch trace_trigger=sched_switch.traceon,sched_switch.traceon
The second traceon trigger will fail and be freed. This triggers a NULL
pointer dereference and crashes the kernel.
Keep the deferred boot-time behavior, but when kthread creation fails,
drain the whole queued list synchronously. Do the same in the late-init
drain path so queued entries are not stranded there either.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260324221326.1395799-3-atwellwea@gmail.com
Fixes: 61d445af0a7c ("tracing: Add bulk garbage collection of freeing event_trigger_data")
Signed-off-by: Wesley Atwell <atwellwea@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 07183aac4a6828e474f00b37c9d795d0d99e18a7 upstream.
When the "copy_trace_marker" option is enabled for an instance, anything
written into /sys/kernel/tracing/trace_marker is also copied into that
instances buffer. When the option is set, that instance's trace_array
descriptor is added to the marker_copies link list. This list is protected
by RCU, as all iterations uses an RCU protected list traversal.
When the instance is deleted, all the flags that were enabled are cleared.
This also clears the copy_trace_marker flag and removes the trace_array
descriptor from the list.
The issue is after the flags are called, a direct call to
update_marker_trace() is performed to clear the flag. This function
returns true if the state of the flag changed and false otherwise. If it
returns true here, synchronize_rcu() is called to make sure all readers
see that its removed from the list.
But since the flag was already cleared, the state does not change and the
synchronization is never called, leaving a possible UAF bug.
Move the clearing of all flags below the updating of the copy_trace_marker
option which then makes sure the synchronization is performed.
Also use the flag for checking the state in update_marker_trace() instead
of looking at if the list is empty.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260318185512.1b6c7db4@gandalf.local.home
Fixes: 7b382efd5e8a ("tracing: Allow the top level trace_marker to write into another instances")
Reported-by: Sasha Levin <sashal@kernel.org>
Closes: https://lore.kernel.org/all/20260225133122.237275-1-sashal@kernel.org/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit edca33a56297d5741ccf867669debec116681987 upstream.
The system call trace events call trace_user_fault_read() to read the user
space part of some system calls. This is done by grabbing a per-cpu
buffer, disabling migration, enabling preemption, calling
copy_from_user(), disabling preemption, enabling migration and checking if
the task was preempted while preemption was enabled. If it was, the buffer
is considered corrupted and it tries again.
There's a safety mechanism that will fail out of this loop if it fails 100
times (with a warning). That warning message was triggered in some
pi_futex stress tests. Enabling the sched_switch trace event and
traceoff_on_warning, showed the problem:
pi_mutex_hammer-1375 [006] d..21 138.981648: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981651: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981656: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981659: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981664: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981667: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981671: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981675: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981679: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981682: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981687: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981690: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981695: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981698: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981703: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981706: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981711: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981714: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981719: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981722: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981727: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981730: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981735: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981738: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
What happened was the task 1375 was flagged to be migrated. When
preemption was enabled, the migration thread woke up to migrate that task,
but failed because migration for that task was disabled. This caused the
loop to fail to exit because the task scheduled out while trying to read
user space.
Every time the task enabled preemption the migration thread would schedule
in, try to migrate the task, fail and let the task continue. But because
the loop would only enable preemption with migration disabled, it would
always fail because each time it enabled preemption to read user space,
the migration thread would try to migrate it.
To solve this, when the loop fails to read user space without being
scheduled out, enabled and disable preemption with migration enabled. This
will allow the migration task to successfully migrate the task and the
next loop should succeed to read user space without being scheduled out.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260316130734.1858a998@gandalf.local.home
Fixes: 64cf7d058a005 ("tracing: Have trace_marker use per-cpu data to read user space")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f35dbac6942171dc4ce9398d1d216a59224590a9 upstream.
Since the validation loop in rb_meta_validate_events() updates the same
cpu_buffer->head_page->entries, the other subbuf entries are not updated.
Fix to use head_page to update the entries field, since it is the cursor
in this loop.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ian Rogers <irogers@google.com>
Fixes: 5f3b6e839f3c ("ring-buffer: Validate boot range memory events")
Link: https://patch.msgid.link/177391153882.193994.17158784065013676533.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d008ba8be8984760e36d7dcd4adbd5a41a645708 upstream.
Some of the sizing logic through tracer_alloc_buffers() uses int
internally, causing unexpected behavior if the user passes a value that
does not fit in an int (on my x86 machine, the result is uselessly tiny
buffers).
Fix by plumbing the parameter's real type (unsigned long) through to the
ring buffer allocation functions, which already use unsigned long.
It has always been possible to create larger ring buffers via the sysfs
interface: this only affects the cmdline parameter.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/bff42a4288aada08bdf74da3f5b67a2c28b761f8.1772852067.git.calvin@wbinvd.org
Fixes: 73c5162aa362 ("tracing: keep ring buffer to minimum size till used")
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3b1679e086bb869ca02722f6bd29b3573a6a0e7e upstream.
Multiple events can be enabled on the kernel command line via a comma
separator. But if the are specified one at a time, then only the last
event is enabled. This is because the event names are saved in a temporary
buffer, and each call by the init cmdline code will reset that buffer.
This also affects names in the boot config file, as it may call the
callback multiple times with an example of:
kernel.trace_event = ":mod:rproc_qcom_common", ":mod:qrtr", ":mod:qcom_aoss"
Change the cmdline callback function to append a comma and the next value
if the temporary buffer already has content.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260302-trace-events-allow-multiple-modules-v1-1-ce4436e37fb8@oss.qualcomm.com
Signed-off-by: Andrei-Alexandru Tachici <andrei-alexandru.tachici@oss.qualcomm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b96d0c59cdbb2a22b2545f6f3d5c6276b05761dd upstream.
trace_graph_thresh_return() called handle_nosleeptime() and then delegated
to trace_graph_return(), which calls handle_nosleeptime() again. When
sleep-time accounting is disabled this double-adjusts calltime and can
produce bogus durations (including underflow).
Fix this by computing rettime once, applying handle_nosleeptime() only
once, using the adjusted calltime for threshold comparison, and writing
the return event directly via __trace_graph_return() when the threshold is
met.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260221113314048jE4VRwIyZEALiYByGK0My@zte.com.cn
Fixes: 3c9880f3ab52b ("ftrace: Use a running sleeptime instead of saving on shadow stack")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0a663b764dbdf135a126284f454c9f01f95a87d4 upstream.
When multiple syscall events are specified in the kernel command line
(e.g., trace_event=syscalls:sys_enter_openat,syscalls:sys_enter_close),
they are often not captured after boot, even though they appear enabled
in the tracing/set_event file.
The issue stems from how syscall events are initialized. Syscall
tracepoints require the global reference count (sys_tracepoint_refcount)
to transition from 0 to 1 to trigger the registration of the syscall
work (TIF_SYSCALL_TRACEPOINT) for tasks, including the init process (pid 1).
The current implementation of early_enable_events() with disable_first=true
used an interleaved sequence of "Disable A -> Enable A -> Disable B -> Enable B".
If multiple syscalls are enabled, the refcount never drops to zero,
preventing the 0->1 transition that triggers actual registration.
Fix this by splitting early_enable_events() into two distinct phases:
1. Disable all events specified in the buffer.
2. Enable all events specified in the buffer.
This ensures the refcount hits zero before re-enabling, allowing syscall
events to be properly activated during early boot.
The code is also refactored to use a helper function to avoid logic
duplication between the disable and enable phases.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260224023544.1250787-1-hehuiwen@kylinos.cn
Fixes: ce1039bd3a89 ("tracing: Fix enabling of syscall events on the command line")
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6ca8379b5d36e22b04e6315c3e49a6083377c862 upstream.
When tracing_thresh is enabled, function graph tracing uses
trace_graph_thresh_return() as the return handler. Unlike
trace_graph_return(), it did not clear the per-task TRACE_GRAPH_NOTRACE
flag set by the entry handler for set_graph_notrace addresses. This could
leave the task permanently in "notrace" state and effectively disable
function graph tracing for that task.
Mirror trace_graph_return()'s per-task notrace handling by clearing
TRACE_GRAPH_NOTRACE and returning early when set.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260221113007819YgrZsMGABff4Rc-O_fZxL@zte.com.cn
Fixes: b84214890a9bc ("function_graph: Move graph notrace bit to shadow stack global var")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ad6fface76da42721c15e8fb281570aaa44a2c01 upstream.
We don't check if cookies are available on the kprobe_multi link
before accessing them in show_fdinfo callback, we should.
Cc: stable@vger.kernel.org
Fixes: da7e9c0a7fbc ("bpf: Add show_fdinfo for kprobe_multi")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260225111249.186230-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 457965c13f0837a289c9164b842d0860133f6274 ]
If trigger_data_alloc() fails and returns NULL, event_hist_trigger_parse()
jumps to the out_free error path. While kfree() safely handles a NULL
pointer, trigger_data_free() does not. This causes a NULL pointer
dereference in trigger_data_free() when evaluating
data->cmd_ops->set_filter.
Fix the problem by adding a NULL pointer check to trigger_data_free().
The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y.
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://patch.msgid.link/20260305193339.2810953-1-linux@roeck-us.net
Fixes: 0550069cc25f ("tracing: Properly process error handling in event_hist_trigger_parse()")
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit da46b5dfef48658d03347cda21532bcdbb521e67 ]
tracing_record_cmdline() internally uses __this_cpu_read() and
__this_cpu_write() on the per-CPU variable trace_cmdline_save, and
trace_save_cmdline() explicitly asserts preemption is disabled via
lockdep_assert_preemption_disabled(). These operations are only safe
when preemption is off, as they were designed to be called from the
scheduler context (probe_wakeup_sched_switch() / probe_wakeup()).
__blk_add_trace() was calling tracing_record_cmdline(current) early in
the blk_tracer path, before ring buffer reservation, from process
context where preemption is fully enabled. This triggers the following
using blktests/blktrace/002:
blktrace/002 (blktrace ftrace corruption with sysfs trace) [failed]
runtime 0.367s ... 0.437s
something found in dmesg:
[ 81.211018] run blktests blktrace/002 at 2026-02-25 22:24:33
[ 81.239580] null_blk: disk nullb1 created
[ 81.357294] BUG: using __this_cpu_read() in preemptible [00000000] code: dd/2516
[ 81.362842] caller is tracing_record_cmdline+0x10/0x40
[ 81.362872] CPU: 16 UID: 0 PID: 2516 Comm: dd Tainted: G N 7.0.0-rc1lblk+ #84 PREEMPT(full)
[ 81.362877] Tainted: [N]=TEST
[ 81.362878] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
[ 81.362881] Call Trace:
[ 81.362884] <TASK>
[ 81.362886] dump_stack_lvl+0x8d/0xb0
...
(See '/mnt/sda/blktests/results/nodev/blktrace/002.dmesg' for the entire message)
[ 81.211018] run blktests blktrace/002 at 2026-02-25 22:24:33
[ 81.239580] null_blk: disk nullb1 created
[ 81.357294] BUG: using __this_cpu_read() in preemptible [00000000] code: dd/2516
[ 81.362842] caller is tracing_record_cmdline+0x10/0x40
[ 81.362872] CPU: 16 UID: 0 PID: 2516 Comm: dd Tainted: G N 7.0.0-rc1lblk+ #84 PREEMPT(full)
[ 81.362877] Tainted: [N]=TEST
[ 81.362878] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
[ 81.362881] Call Trace:
[ 81.362884] <TASK>
[ 81.362886] dump_stack_lvl+0x8d/0xb0
[ 81.362895] check_preemption_disabled+0xce/0xe0
[ 81.362902] tracing_record_cmdline+0x10/0x40
[ 81.362923] __blk_add_trace+0x307/0x5d0
[ 81.362934] ? lock_acquire+0xe0/0x300
[ 81.362940] ? iov_iter_extract_pages+0x101/0xa30
[ 81.362959] blk_add_trace_bio+0x106/0x1e0
[ 81.362968] submit_bio_noacct_nocheck+0x24b/0x3a0
[ 81.362979] ? lockdep_init_map_type+0x58/0x260
[ 81.362988] submit_bio_wait+0x56/0x90
[ 81.363009] __blkdev_direct_IO_simple+0x16c/0x250
[ 81.363026] ? __pfx_submit_bio_wait_endio+0x10/0x10
[ 81.363038] ? rcu_read_lock_any_held+0x73/0xa0
[ 81.363051] blkdev_read_iter+0xc1/0x140
[ 81.363059] vfs_read+0x20b/0x330
[ 81.363083] ksys_read+0x67/0xe0
[ 81.363090] do_syscall_64+0xbf/0xf00
[ 81.363102] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 81.363106] RIP: 0033:0x7f281906029d
[ 81.363111] Code: 31 c0 e9 c6 fe ff ff 50 48 8d 3d 66 63 0a 00 e8 59 ff 01 00 66 0f 1f 84 00 00 00 00 00 80 3d 41 33 0e 00 00 74 17 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 5b c3 66 2e 0f 1f 84 00 00 00 00 00 48 83 ec
[ 81.363113] RSP: 002b:00007ffca127dd48 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 81.363120] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f281906029d
[ 81.363122] RDX: 0000000000001000 RSI: 0000559f8bfae000 RDI: 0000000000000000
[ 81.363123] RBP: 0000000000001000 R08: 0000002863a10a81 R09: 00007f281915f000
[ 81.363124] R10: 00007f2818f77b60 R11: 0000000000000246 R12: 0000559f8bfae000
[ 81.363126] R13: 0000000000000000 R14: 0000000000000000 R15: 000000000000000a
[ 81.363142] </TASK>
The same BUG fires from blk_add_trace_plug(), blk_add_trace_unplug(),
and blk_add_trace_rq() paths as well.
The purpose of tracing_record_cmdline() is to cache the task->comm for
a given PID so that the trace can later resolve it. It is only
meaningful when a trace event is actually being recorded. Ring buffer
reservation via ring_buffer_lock_reserve() disables preemption, and
preemption remains disabled until the event is committed :-
__blk_add_trace()
__trace_buffer_lock_reserve()
__trace_buffer_lock_reserve()
ring_buffer_lock_reserve()
preempt_disable_notrace(); <---
With this fix blktests for blktrace pass:
blktests (master) # ./check blktrace
blktrace/001 (blktrace zone management command tracing) [passed]
runtime 3.650s ... 3.647s
blktrace/002 (blktrace ftrace corruption with sysfs trace) [passed]
runtime 0.411s ... 0.384s
Fixes: 7ffbd48d5cab ("tracing: Cache comms only after an event occurred")
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit e39bb9e02b68942f8e9359d2a3efe7d37ae6be0e upstream.
When a process forks, the child process copies the parent's VMAs but the
user_mapped reference count is not incremented. As a result, when both the
parent and child processes exit, tracing_buffers_mmap_close() is called
twice. On the second call, user_mapped is already 0, causing the function to
return -ENODEV and triggering a WARN_ON.
Normally, this isn't an issue as the memory is mapped with VM_DONTCOPY set.
But this is only a hint, and the application can call
madvise(MADVISE_DOFORK) which resets the VM_DONTCOPY flag. When the
application does that, it can trigger this issue on fork.
Fix it by incrementing the user_mapped reference count without re-mapping
the pages in the VMA's open callback.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://patch.msgid.link/20260227025842.1085206-1-wangqing7171@gmail.com
Fixes: cf9f0f7c4c5bb ("tracing: Allow user-space mapping of the ring-buffer")
Reported-by: syzbot+3b5dd2030fe08afdf65d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3b5dd2030fe08afdf65d
Tested-by: syzbot+3b5dd2030fe08afdf65d@syzkaller.appspotmail.com
Signed-off-by: Qing Wang <wangqing7171@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9678e53179aa7e907360f5b5b275769008a69b80 ]
The event_hist_poll() function attempts to verify whether an event file is
being removed, but this check may not occur or could be unnecessarily
delayed. This happens because hist_poll_wakeup() is currently invoked only
from event_hist_trigger() when a hist command is triggered. If the event
file is being removed, no associated hist command will be triggered and a
waiter will be woken up only after an unrelated hist command is triggered.
Fix the issue by adding a call to hist_poll_wakeup() in
remove_event_file_dir() after setting the EVENT_FILE_FL_FREED flag. This
ensures that a task polling on a hist file is woken up and receives
EPOLLERR.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260219162737.314231-3-petr.pavlu@suse.com
Fixes: 1bd13edbbed6 ("tracing/hist: Add poll(POLLIN) support on hist file")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f0a0da1f907e8488826d91c465f7967a56a95aca ]
The event_hist_open() and event_hist_poll() functions currently retrieve
a trace_event_file pointer from a file struct by invoking
event_file_data(), which simply returns file->f_inode->i_private. The
functions then check if the pointer is NULL to determine whether the event
is still valid. This approach is flawed because i_private is assigned when
an eventfs inode is allocated and remains set throughout its lifetime.
Instead, the code should call event_file_file(), which checks for
EVENT_FILE_FL_FREED. Using the incorrect access function may result in the
code potentially opening a hist file for an event that is being removed or
becoming stuck while polling on this file.
Correct the access method to event_file_file() in both functions.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://patch.msgid.link/20260219162737.314231-2-petr.pavlu@suse.com
Fixes: 1bd13edbbed6 ("tracing/hist: Add poll(POLLIN) support on hist file")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f4ff9f646a4d373f9e895c2f0073305da288bc0a ]
The function graph tracer was modified to us the ftrace_ops of the
function tracer. This simplified the code as well as allowed more features
of the function graph tracer.
Not all architectures were converted over as it required the
implementation of HAVE_DYNAMIC_FTRACE_WITH_ARGS to implement. For those
architectures, it still did it the old way where the function graph tracer
handle was called by the function tracer trampoline. The handler then had
to check the hash to see if the registered handlers wanted to be called by
that function or not.
In order to speed up the function graph tracer that used ftrace_ops, if
only one callback was registered with function graph, it would call its
function directly via a static call.
Now, if the architecture does not support the use of using ftrace_ops and
still has the ftrace function trampoline calling the function graph
handler, then by doing a direct call it removes the check against the
handler's hash (list of functions it wants callbacks to), and it may call
that handler for functions that the handler did not request calls for.
On 32bit x86, which does not support the ftrace_ops use with function
graph tracer, it shows the issue:
~# trace-cmd start -p function -l schedule
~# trace-cmd show
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
2) * 11898.94 us | schedule();
3) # 1783.041 us | schedule();
1) | schedule() {
------------------------------------------
1) bash-8369 => kworker-7669
------------------------------------------
1) | schedule() {
------------------------------------------
1) kworker-7669 => bash-8369
------------------------------------------
1) + 97.004 us | }
1) | schedule() {
[..]
Now by starting the function tracer is another instance:
~# trace-cmd start -B foo -p function
This causes the function graph tracer to trace all functions (because the
function trace calls the function graph tracer for each on, and the
function graph trace is doing a direct call):
~# trace-cmd show
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
1) 1.669 us | } /* preempt_count_sub */
1) + 10.443 us | } /* _raw_spin_unlock_irqrestore */
1) | tick_program_event() {
1) | clockevents_program_event() {
1) 1.044 us | ktime_get();
1) 6.481 us | lapic_next_event();
1) + 10.114 us | }
1) + 11.790 us | }
1) ! 181.223 us | } /* hrtimer_interrupt */
1) ! 184.624 us | } /* __sysvec_apic_timer_interrupt */
1) | irq_exit_rcu() {
1) 0.678 us | preempt_count_sub();
When it should still only be tracing the schedule() function.
To fix this, add a macro FGRAPH_NO_DIRECT to be set to 0 when the
architecture does not support function graph use of ftrace_ops, and set to
1 otherwise. Then use this macro to know to allow function graph tracer to
call the handlers directly or not.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://patch.msgid.link/20260218104244.5f14dade@gandalf.local.home
Fixes: cc60ee813b503 ("function_graph: Use static_call and branch to optimize entry function")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 912b0ee248c529a4f45d1e7f568dc1adddbf2a4a ]
Check the event length before adding it for accessing next index in
rb_read_data_buffer(). Since this function is used for validating
possibly broken ring buffers, the length of the event could be broken.
In that case, the new event (e + len) can point a wrong address.
To avoid invalid memory access at boot, check whether the length of
each event is in the possible range before using it.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 5f3b6e839f3c ("ring-buffer: Validate boot range memory events")
Link: https://patch.msgid.link/177123421541.142205.9414352170164678966.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f1547779402c4cd67755c33616b7203baa88420b ]
There is a pointer head_page in rb_meta_validate_events() which is not
initialized at the beginning of a function. This pointer can be dereferenced
if there is a failure during reader page validation. In this case the control
is passed to "invalid" label where the pointer is dereferenced in a loop.
To fix the issue initialize orig_head and head_page before calling
rb_validate_buffer.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260213100130.2013839-1-d.dulov@aladdin.ru
Closes: https://lore.kernel.org/r/202406130130.JtTGRf7W-lkp@intel.com/
Fixes: 5f3b6e839f3c ("ring-buffer: Validate boot range memory events")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 53b2fae90ff01fede6520ca744ed5e8e366497ba ]
When registering a second fgraph callback, direct path is disabled and
array loop is used instead. When ftrace_graph_active falls back to one,
we try to re-enable direct mode via ftrace_graph_enable_direct(true, ...).
But ftrace_graph_enable_direct() incorrectly disables the static key
rather than enabling it. This leaves fgraph_do_direct permanently off
after first multi-callback transition, so direct fast mode is never
restored.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260213142932519cuWSpEXeS4-UnCvNXnK2P@zte.com.cn
Fixes: cc60ee813b503 ("function_graph: Use static_call and branch to optimize entry function")
Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 804c4a2209bcf6ed4c45386f033e4d0f7c5bfda5 ]
Commit 32dc0042528d ("tracing: Reset last-boot buffers when reading
out all cpu buffers") resets the last_boot_info when user read out
all data via trace_pipe* files. But it is not reset when user
resets the buffer from other files. (e.g. write `trace` file)
Reset it when the corresponding ring buffer is reset too.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/177071302364.2293046.17895165659153977720.stgit@mhiramat.tok.corp.google.com
Fixes: 32dc0042528d ("tracing: Reset last-boot buffers when reading out all cpu buffers")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f844282deed7481cf2f813933229261e27306551 ]
Since the per-cpu buffer_size_kb file is writable for changing
per-cpu ring buffer size, the file should have the write access
permission.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/177071301597.2293046.11683339475076917920.stgit@mhiramat.tok.corp.google.com
Fixes: 21ccc9cd7211 ("tracing: Disable "other" permission bits in the tracefs files")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f743435f988cb0cf1f521035aee857851b25e06d ]
The get_sample() function in the hwlat tracer assumes the caller holds
hwlat_data.lock, but this is not actually happening. The result is
unprotected data access to hwlat_data, and in per-cpu mode can result in
false sharing which may show up as false positive latency events.
The specific case of false sharing observed was primarily between
hwlat_data.sample_width and hwlat_data.count. These are separated by
just 8B and are therefore likely to share a cache line. When one thread
modifies count, the cache line is in a modified state so when other
threads read sample_width in the main latency detection loop, they fetch
the modified cache line. On some systems, the fetch itself may be slow
enough to count as a latency event, which could set up a self
reinforcing cycle of latency events as each event increments count which
then causes more latency events, continuing the cycle.
The other result of the unprotected data access is that hwlat_data.count
can end up with duplicate or missed values, which was observed on some
systems in testing.
Convert hwlat_data.count to atomic64_t so it can be safely modified
without locking, and prevent false sharing by pulling sample_width into
a local variable.
One system this was tested on was a dual socket server with 32 CPUs on
each numa node. With settings of 1us threshold, 1000us width, and
2000us window, this change reduced the number of latency events from
500 per second down to approximately 1 event per minute. Some machines
tested did not exhibit measurable latency from the false sharing.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260210074810.6328-1-clord@mykolab.com
Signed-off-by: Colin Lord <clord@mykolab.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 276f3b6daf6024ae2742afd161e7418a5584a660 ]
Mahe reported issue with bpf_override_return helper not working when
executed from kprobe.multi bpf program on arm.
The problem is that on arm we use alternate storage for pt_regs object
that is passed to bpf_prog_run and if any register is changed (which
is the case of bpf_override_return) it's not propagated back to actual
pt_regs object.
Fixing this by introducing and calling ftrace_partial_regs_update function
to propagate the values of changed registers (ip and stack).
Reported-by: Mahe Tardy <mahe.tardy@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/bpf/20260112121157.854473-1-jolsa@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9df0e49c5b9b8d051529be9994e4f92f2d20be6f ]
The macros ENABLE_EVENT_STR and DISABLE_EVENT_STR were added to trace.h so
that more than one file can have access to them, but was never removed
from their original location. Remove the duplicates.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://patch.msgid.link/20260126130037.4ba201f9@gandalf.local.home
Fixes: d0bad49bb0a09 ("tracing: Add enable_hist/disable_hist triggers")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0550069cc25f513ce1f109c88f7c1f01d63297db ]
Memory allocated with trigger_data_alloc() requires trigger_data_free()
for proper cleanup.
Replace kfree() with trigger_data_free() to fix this.
Found via static analysis and code review.
This isn't a real bug due to the current code basically being an open
coded version of trigger_data_free() without the synchronization. The
synchronization isn't needed as this is the error path of creation and
there's nothing to synchronize against yet. Replace the kfree() to be
consistent with the allocation.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://patch.msgid.link/20251211100058.2381268-1-linmq006@gmail.com
Fixes: e1f187d09e11 ("tracing: Have existing event_command.parse() implementations use helpers")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e8a1e7eaa19d0b757b06a2f913e3eeb4b1c002c6 ]
__sprint_symbol() might access an invalid pointer when
kallsyms_lookup_buildid() returns a symbol found by
ftrace_mod_address_lookup().
The ftrace lookup function must set both @modname and @modbuildid the same
way as module_address_lookup().
Link: https://lkml.kernel.org/r/20251128135920.217303-7-pmladek@suse.com
Fixes: 9294523e3768 ("module: add printk formats to add module build ID to stacktraces")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4be42c92220128b3128854a2d6b0f0ad0bcedbdb ]
At the moment the we allow the jmp attach only for ftrace_ops that
has FTRACE_OPS_FL_JMP set. This conflicts with following changes
where we use single ftrace_ops object for all direct call sites,
so all could be be attached via just call or jmp.
We already limit the jmp attach support with config option and bit
(LSB) set on the trampoline address. It turns out that's actually
enough to limit the jmp attach for architecture and only for chosen
addresses (with LSB bit set).
Each user of register_ftrace_direct or modify_ftrace_direct can set
the trampoline bit (LSB) to indicate it has to be attached by jmp.
The bpf trampoline generation code uses trampoline flags to generate
jmp-attach specific code and ftrace inner code uses the trampoline
bit (LSB) to handle return from jmp attachment, so there's no harm
to remove the FTRACE_OPS_FL_JMP bit.
The fexit/fmodret performance stays the same (did not drop),
current code:
fentry : 77.904 ± 0.546M/s
fexit : 62.430 ± 0.554M/s
fmodret : 66.503 ± 0.902M/s
with this change:
fentry : 80.472 ± 0.061M/s
fexit : 63.995 ± 0.127M/s
fmodret : 67.362 ± 0.175M/s
Fixes: 25e4e3565d45 ("ftrace: Introduce FTRACE_OPS_FL_JMP")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-2-jolsa@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 802eef5afb1865bc5536a5302c068ba2215a1f72 ]
After commit 37cce22dbd51 ("bpf: verifier: Refactor helper access type tracking"),
the verifier started relying on the access type flags in helper
function prototypes to perform memory access optimizations.
Currently, several helper functions utilizing ARG_PTR_TO_MEM lack the
corresponding MEM_RDONLY or MEM_WRITE flags. This omission causes the
verifier to incorrectly assume that the buffer contents are unchanged
across the helper call. Consequently, the verifier may optimize away
subsequent reads based on this wrong assumption, leading to correctness
issues.
For bpf_get_stack_proto_raw_tp, the original MEM_RDONLY was incorrect
since the helper writes to the buffer. Change it to ARG_PTR_TO_UNINIT_MEM
which correctly indicates write access to potentially uninitialized memory.
Similar issues were recently addressed for specific helpers in commit
ac44dcc788b9 ("bpf: Fix verifier assumptions of bpf_d_path's output buffer")
and commit 2eb7648558a7 ("bpf: Specify access type of bpf_sysctl_get_name args").
Fix these prototypes by adding the correct memory access flags.
Fixes: 37cce22dbd51 ("bpf: verifier: Refactor helper access type tracking")
Co-developed-by: Shuran Liu <electronlsr@gmail.com>
Signed-off-by: Shuran Liu < |
