| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 90f9f5d64cae4e72defd96a2a22760173cb3c9ec upstream.
When creating a synthetic event based on an existing synthetic event that
had a stacktrace field and the new synthetic event used that field a
kernel crash occurred:
~# cd /sys/kernel/tracing
~# echo 's:stack unsigned long stack[];' > dynamic_events
~# echo 'hist:keys=prev_pid:s0=common_stacktrace if prev_state & 3' >> events/sched/sched_switch/trigger
~# echo 'hist:keys=next_pid:s1=$s0:onmatch(sched.sched_switch).trace(stack,$s1)' >> events/sched/sched_switch/trigger
The above creates a synthetic event that takes a stacktrace when a task
schedules out in a non-running state and passes that stacktrace to the
sched_switch event when that task schedules back in. It triggers the
"stack" synthetic event that has a stacktrace as its field (called "stack").
~# echo 's:syscall_stack s64 id; unsigned long stack[];' >> dynamic_events
~# echo 'hist:keys=common_pid:s2=stack' >> events/synthetic/stack/trigger
~# echo 'hist:keys=common_pid:s3=$s2,i0=id:onmatch(synthetic.stack).trace(syscall_stack,$i0,$s3)' >> events/raw_syscalls/sys_exit/trigger
The above makes another synthetic event called "syscall_stack" that
attaches the first synthetic event (stack) to the sys_exit trace event and
records the stacktrace from the stack event with the id of the system call
that is exiting.
When enabling this event (or using it in a historgram):
~# echo 1 > events/synthetic/syscall_stack/enable
Produces a kernel crash!
BUG: unable to handle page fault for address: 0000000000400010
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP PTI
CPU: 6 UID: 0 PID: 1257 Comm: bash Not tainted 6.16.3+deb14-amd64 #1 PREEMPT(lazy) Debian 6.16.3-1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
RIP: 0010:trace_event_raw_event_synth+0x90/0x380
Code: c5 00 00 00 00 85 d2 0f 84 e1 00 00 00 31 db eb 34 0f 1f 00 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 2e 0f 1f 84 00 00 00 00 00 <49> 8b 04 24 48 83 c3 01 8d 0c c5 08 00 00 00 01 cd 41 3b 5d 40 0f
RSP: 0018:ffffd2670388f958 EFLAGS: 00010202
RAX: ffff8ba1065cc100 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000001 RSI: fffff266ffda7b90 RDI: ffffd2670388f9b0
RBP: 0000000000000010 R08: ffff8ba104e76000 R09: ffffd2670388fa50
R10: ffff8ba102dd42e0 R11: ffffffff9a908970 R12: 0000000000400010
R13: ffff8ba10a246400 R14: ffff8ba10a710220 R15: fffff266ffda7b90
FS: 00007fa3bc63f740(0000) GS:ffff8ba2e0f48000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000400010 CR3: 0000000107f9e003 CR4: 0000000000172ef0
Call Trace:
<TASK>
? __tracing_map_insert+0x208/0x3a0
action_trace+0x67/0x70
event_hist_trigger+0x633/0x6d0
event_triggers_call+0x82/0x130
trace_event_buffer_commit+0x19d/0x250
trace_event_raw_event_sys_exit+0x62/0xb0
syscall_exit_work+0x9d/0x140
do_syscall_64+0x20a/0x2f0
? trace_event_raw_event_sched_switch+0x12b/0x170
? save_fpregs_to_fpstate+0x3e/0x90
? _raw_spin_unlock+0xe/0x30
? finish_task_switch.isra.0+0x97/0x2c0
? __rseq_handle_notify_resume+0xad/0x4c0
? __schedule+0x4b8/0xd00
? restore_fpregs_from_fpstate+0x3c/0x90
? switch_fpu_return+0x5b/0xe0
? do_syscall_64+0x1ef/0x2f0
? do_fault+0x2e9/0x540
? __handle_mm_fault+0x7d1/0xf70
? count_memcg_events+0x167/0x1d0
? handle_mm_fault+0x1d7/0x2e0
? do_user_addr_fault+0x2c3/0x7f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The reason is that the stacktrace field is not labeled as such, and is
treated as a normal field and not as a dynamic event that it is.
In trace_event_raw_event_synth() the event is field is still treated as a
dynamic array, but the retrieval of the data is considered a normal field,
and the reference is just the meta data:
// Meta data is retrieved instead of a dynamic array
str_val = (char *)(long)var_ref_vals[val_idx];
// Then when it tries to process it:
len = *((unsigned long *)str_val) + 1;
It triggers a kernel page fault.
To fix this, first when defining the fields of the first synthetic event,
set the filter type to FILTER_STACKTRACE. This is used later by the second
synthetic event to know that this field is a stacktrace. When creating
the field of the new synthetic event, have it use this FILTER_STACKTRACE
to know to create a stacktrace field to copy the stacktrace into.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://patch.msgid.link/20260122194824.6905a38e@gandalf.local.home
Fixes: 00cf3d672a9d ("tracing: Allow synthetic events to pass around stacktraces")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 47ef834209e5981f443240d8a8b45bf680df22aa upstream.
The commit 4d38328eb442d ("tracing: Fix synth event printk format for str
fields") replaced "%.*s" with "%s" but missed removing the number size of
the dynamic and static strings. The commit e1a453a57bc7 ("tracing: Do not
add length to print format in synthetic events") fixed the dynamic part
but did not fix the static part. That is, with the commands:
# echo 's:wake_lat char[] wakee; u64 delta;' >> /sys/kernel/tracing/dynamic_events
# echo 'hist:keys=pid:ts=common_timestamp.usecs if !(common_flags & 0x18)' > /sys/kernel/tracing/events/sched/sched_waking/trigger
# echo 'hist:keys=next_pid:delta=common_timestamp.usecs-$ts:onmatch(sched.sched_waking).trace(wake_lat,next_comm,$delta)' > /sys/kernel/tracing/events/sched/sched_switch/trigger
That caused the output of:
<idle>-0 [001] d..5. 193.428167: wake_lat: wakee=(efault)sshd-sessiondelta=155
sshd-session-879 [001] d..5. 193.811080: wake_lat: wakee=(efault)kworker/u34:5delta=58
<idle>-0 [002] d..5. 193.811198: wake_lat: wakee=(efault)bashdelta=91
The commit e1a453a57bc7 fixed the part where the synthetic event had
"char[] wakee". But if one were to replace that with a static size string:
# echo 's:wake_lat char[16] wakee; u64 delta;' >> /sys/kernel/tracing/dynamic_events
Where "wakee" is defined as "char[16]" and not "char[]" making it a static
size, the code triggered the "(efaul)" again.
Remove the added STR_VAR_LEN_MAX size as the string is still going to be
nul terminated.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Link: https://patch.msgid.link/20251204151935.5fa30355@gandalf.local.home
Fixes: e1a453a57bc7 ("tracing: Do not add length to print format in synthetic events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ef7f38df890f5dcd2ae62f8dbde191d72f3bebae upstream.
Synthetic events currently do not have a function to register perf events.
This leads to calling the tracepoint register functions with a NULL
function pointer which triggers:
------------[ cut here ]------------
WARNING: kernel/tracepoint.c:175 at tracepoint_add_func+0x357/0x370, CPU#2: perf/2272
Modules linked in: kvm_intel kvm irqbypass
CPU: 2 UID: 0 PID: 2272 Comm: perf Not tainted 6.18.0-ftest-11964-ge022764176fc-dirty #323 PREEMPTLAZY
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
RIP: 0010:tracepoint_add_func+0x357/0x370
Code: 28 9c e8 4c 0b f5 ff eb 0f 4c 89 f7 48 c7 c6 80 4d 28 9c e8 ab 89 f4 ff 31 c0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc <0f> 0b 49 c7 c6 ea ff ff ff e9 ee fe ff ff 0f 0b e9 f9 fe ff ff 0f
RSP: 0018:ffffabc0c44d3c40 EFLAGS: 00010246
RAX: 0000000000000001 RBX: ffff9380aa9e4060 RCX: 0000000000000000
RDX: 000000000000000a RSI: ffffffff9e1d4a98 RDI: ffff937fcf5fd6c8
RBP: 0000000000000001 R08: 0000000000000007 R09: ffff937fcf5fc780
R10: 0000000000000003 R11: ffffffff9c193910 R12: 000000000000000a
R13: ffffffff9e1e5888 R14: 0000000000000000 R15: ffffabc0c44d3c78
FS: 00007f6202f5f340(0000) GS:ffff93819f00f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055d3162281a8 CR3: 0000000106a56003 CR4: 0000000000172ef0
Call Trace:
<TASK>
tracepoint_probe_register+0x5d/0x90
synth_event_reg+0x3c/0x60
perf_trace_event_init+0x204/0x340
perf_trace_init+0x85/0xd0
perf_tp_event_init+0x2e/0x50
perf_try_init_event+0x6f/0x230
? perf_event_alloc+0x4bb/0xdc0
perf_event_alloc+0x65a/0xdc0
__se_sys_perf_event_open+0x290/0x9f0
do_syscall_64+0x93/0x7b0
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
? trace_hardirqs_off+0x53/0xc0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Instead, have the code return -ENODEV, which doesn't warn and has perf
error out with:
# perf record -e synthetic:futex_wait
Error:
The sys_perf_event_open() syscall returned with 19 (No such device) for event (synthetic:futex_wait).
"dmesg | grep -i perf" may provide additional information.
Ideally perf should support synthetic events, but for now just fix the
warning. The support can come later.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://patch.msgid.link/20251216182440.147e4453@gandalf.local.home
Fixes: 4b147936fa509 ("tracing: Add support for 'synthetic' events")
Reported-by: Ian Rogers <irogers@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3e9a18e1c3e931abecf501cbb23d28d69f85bb56 ]
ftrace_hash_ipmodify_enable() checks IPMODIFY and DIRECT ftrace_ops on
the same kernel function. When needed, ftrace_hash_ipmodify_enable()
calls ops->ops_func() to prepare the direct ftrace (BPF trampoline) to
share the same function as the IPMODIFY ftrace (livepatch).
ftrace_hash_ipmodify_enable() is called in register_ftrace_direct() path,
but not called in modify_ftrace_direct() path. As a result, the following
operations will break livepatch:
1. Load livepatch to a kernel function;
2. Attach fentry program to the kernel function;
3. Attach fexit program to the kernel function.
After 3, the kernel function being used will not be the livepatched
version, but the original version.
Fix this by adding __ftrace_hash_update_ipmodify() to
__modify_ftrace_direct() and adjust some logic around the call.
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251027175023.1521602-3-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 56b3c85e153b84f27e6cff39623ba40a1ad299d3 ]
When livepatch is attached to the same function as bpf trampoline with
a fexit program, bpf trampoline code calls register_ftrace_direct()
twice. The first time will fail with -EAGAIN, and the second time it
will succeed. This requires register_ftrace_direct() to unregister
the address on the first attempt. Otherwise, the bpf trampoline cannot
attach. Here is an easy way to reproduce this issue:
insmod samples/livepatch/livepatch-sample.ko
bpftrace -e 'fexit:cmdline_proc_show {}'
ERROR: Unable to attach probe: fexit:vmlinux:cmdline_proc_show...
Fix this by cleaning up the hash when register_ftrace_function_nolock hits
errors.
Also, move the code that resets ops->func and ops->trampoline to the error
path of register_ftrace_direct(); and add a helper function reset_direct()
in register_ftrace_direct() and unregister_ftrace_direct().
Fixes: d05cb470663a ("ftrace: Fix modification of direct_function hash while in use")
Cc: stable@vger.kernel.org # v6.6+
Reported-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Closes: https://lore.kernel.org/live-patching/c5058315a39d4615b333e485893345be@crowdstrike.com/
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-and-tested-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251027175023.1521602-2-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
[ moved cleanup to reset_direct() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 80f0d631dcc76ee1b7755bfca1d8417d91d71414 ]
The function create_field_var() allocates memory for 'val' through
create_hist_field() inside parse_atom(), and for 'var' through
create_var(), which in turn allocates var->type and var->var.name
internally. Simply calling kfree() to release these structures will
result in memory leaks.
Use destroy_hist_field() to properly free 'val', and explicitly release
the memory of var->type and var->var.name before freeing 'var' itself.
Link: https://patch.msgid.link/20251106120132.3639920-1-zilin@seu.edu.cn
Fixes: 02205a6752f22 ("tracing: Add support for 'field variables'")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4099b98203d6b33d990586542fa5beee408032a3 ]
A soft lockup was observed when loading amdgpu module.
If a module has a lot of tracable functions, multiple calls
to kallsyms_lookup can spend too much time in RCU critical
section and with disabled preemption, causing kernel panic.
This is the same issue that was fixed in
commit d0b24b4e91fc ("ftrace: Prevent RCU stall on PREEMPT_VOLUNTARY
kernels") and commit 42ea22e754ba ("ftrace: Add cond_resched() to
ftrace_graph_set_hash()").
Fix it the same way by adding cond_resched() in ftrace_module_enable.
Link: https://lore.kernel.org/aMQD9_lxYmphT-up@vova-pc
Signed-off-by: Vladimir Riabchun <ferr.lambarginio@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
dereference
[ Upstream commit 9cf9aa7b0acfde7545c1a1d912576e9bab28dc6f ]
There is a critical race condition in kprobe initialization that can lead to
NULL pointer dereference and kernel crash.
[1135630.084782] Unable to handle kernel paging request at virtual address 0000710a04630000
...
[1135630.260314] pstate: 404003c9 (nZcv DAIF +PAN -UAO)
[1135630.269239] pc : kprobe_perf_func+0x30/0x260
[1135630.277643] lr : kprobe_dispatcher+0x44/0x60
[1135630.286041] sp : ffffaeff4977fa40
[1135630.293441] x29: ffffaeff4977fa40 x28: ffffaf015340e400
[1135630.302837] x27: 0000000000000000 x26: 0000000000000000
[1135630.312257] x25: ffffaf029ed108a8 x24: ffffaf015340e528
[1135630.321705] x23: ffffaeff4977fc50 x22: ffffaeff4977fc50
[1135630.331154] x21: 0000000000000000 x20: ffffaeff4977fc50
[1135630.340586] x19: ffffaf015340e400 x18: 0000000000000000
[1135630.349985] x17: 0000000000000000 x16: 0000000000000000
[1135630.359285] x15: 0000000000000000 x14: 0000000000000000
[1135630.368445] x13: 0000000000000000 x12: 0000000000000000
[1135630.377473] x11: 0000000000000000 x10: 0000000000000000
[1135630.386411] x9 : 0000000000000000 x8 : 0000000000000000
[1135630.395252] x7 : 0000000000000000 x6 : 0000000000000000
[1135630.403963] x5 : 0000000000000000 x4 : 0000000000000000
[1135630.412545] x3 : 0000710a04630000 x2 : 0000000000000006
[1135630.421021] x1 : ffffaeff4977fc50 x0 : 0000710a04630000
[1135630.429410] Call trace:
[1135630.434828] kprobe_perf_func+0x30/0x260
[1135630.441661] kprobe_dispatcher+0x44/0x60
[1135630.448396] aggr_pre_handler+0x70/0xc8
[1135630.454959] kprobe_breakpoint_handler+0x140/0x1e0
[1135630.462435] brk_handler+0xbc/0xd8
[1135630.468437] do_debug_exception+0x84/0x138
[1135630.475074] el1_dbg+0x18/0x8c
[1135630.480582] security_file_permission+0x0/0xd0
[1135630.487426] vfs_write+0x70/0x1c0
[1135630.493059] ksys_write+0x5c/0xc8
[1135630.498638] __arm64_sys_write+0x24/0x30
[1135630.504821] el0_svc_common+0x78/0x130
[1135630.510838] el0_svc_handler+0x38/0x78
[1135630.516834] el0_svc+0x8/0x1b0
kernel/trace/trace_kprobe.c: 1308
0xffff3df8995039ec <kprobe_perf_func+0x2c>: ldr x21, [x24,#120]
include/linux/compiler.h: 294
0xffff3df8995039f0 <kprobe_perf_func+0x30>: ldr x1, [x21,x0]
kernel/trace/trace_kprobe.c
1308: head = this_cpu_ptr(call->perf_events);
1309: if (hlist_empty(head))
1310: return 0;
crash> struct trace_event_call -o
struct trace_event_call {
...
[120] struct hlist_head *perf_events; //(call->perf_event)
...
}
crash> struct trace_event_call ffffaf015340e528
struct trace_event_call {
...
perf_events = 0xffff0ad5fa89f088, //this value is correct, but x21 = 0
...
}
Race Condition Analysis:
The race occurs between kprobe activation and perf_events initialization:
CPU0 CPU1
==== ====
perf_kprobe_init
perf_trace_event_init
tp_event->perf_events = list;(1)
tp_event->class->reg (2)← KPROBE ACTIVE
Debug exception triggers
...
kprobe_dispatcher
kprobe_perf_func (tk->tp.flags & TP_FLAG_PROFILE)
head = this_cpu_ptr(call->perf_events)(3)
(perf_events is still NULL)
Problem:
1. CPU0 executes (1) assigning tp_event->perf_events = list
2. CPU0 executes (2) enabling kprobe functionality via class->reg()
3. CPU1 triggers and reaches kprobe_dispatcher
4. CPU1 checks TP_FLAG_PROFILE - condition passes (step 2 completed)
5. CPU1 calls kprobe_perf_func() and crashes at (3) because
call->perf_events is still NULL
CPU1 sees that kprobe functionality is enabled but does not see that
perf_events has been assigned.
Add pairing read and write memory barriers to guarantee that if CPU1
sees that kprobe functionality is enabled, it must also see that
perf_events has been assigned.
Link: https://lore.kernel.org/all/20251001022025.44626-1-chenyuan_fl@163.com/
Fixes: 50d780560785 ("tracing/kprobes: Add probe handler dispatcher to support perf and ftrace concurrent use")
Cc: stable@vger.kernel.org
Signed-off-by: Yuan Chen <chenyuan@kylinos.cn>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit abdaf49be5424db74e19d167c10d7dad79a0efc2 ]
Graph tracer framework ensures we won't migrate, kprobe_multi_link_prog_run
called all the way from graph tracer, which disables preemption in
function_graph_enter_regs, as Jiri and Yonghong suggested, there is no
need to use migrate_disable. As a result, some overhead may will be reduced.
And add cant_sleep check for __this_cpu_inc_return.
Fixes: 0dcac2725406 ("bpf: Add multi kprobe link")
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250814121430.2347454-1-chen.dylane@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1a251f52cfdc417c84411a056bc142cbd77baef4 ]
This just standardizes the use of MIN() and MAX() macros, with the very
traditional semantics. The goal is to use these for C constant
expressions and for top-level / static initializers, and so be able to
simplify the min()/max() macros.
These macro names were used by various kernel code - they are very
traditional, after all - and all such users have been fixed up, with a
few different approaches:
- trivial duplicated macro definitions have been removed
Note that 'trivial' here means that it's obviously kernel code that
already included all the major kernel headers, and thus gets the new
generic MIN/MAX macros automatically.
- non-trivial duplicated macro definitions are guarded with #ifndef
This is the "yes, they define their own versions, but no, the include
situation is not entirely obvious, and maybe they don't get the
generic version automatically" case.
- strange use case #1
A couple of drivers decided that the way they want to describe their
versioning is with
#define MAJ 1
#define MIN 2
#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN)
which adds zero value and I just did my Alexander the Great
impersonation, and rewrote that pointless Gordian knot as
#define DRV_VERSION "1.2"
instead.
- strange use case #2
A couple of drivers thought that it's a good idea to have a random
'MIN' or 'MAX' define for a value or index into a table, rather than
the traditional macro that takes arguments.
These values were re-written as C enum's instead. The new
function-line macros only expand when followed by an open
parenthesis, and thus don't clash with enum use.
Happily, there weren't really all that many of these cases, and a lot of
users already had the pattern of using '#ifndef' guarding (or in one
case just using '#undef MIN') before defining their own private version
that does the same thing. I left such cases alone.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 456c32e3c4316654f95f9d49c12cbecfb77d5660 upstream.
Since dynamic_events interface on tracefs is compatible with
kprobe_events and uprobe_events, it should also check the lockdown
status and reject if it is set.
Link: https://lore.kernel.org/all/175824455687.45175.3734166065458520748.stgit@devnote2/
Fixes: 17911ff38aa5 ("tracing: Add locked_down checks to the open calls of files created for tracefs")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit cd4453c5e983cf1fd5757e9acb915adb1e4602b6 ]
Syzkaller trigger a fault injection warning:
WARNING: CPU: 1 PID: 12326 at tracepoint_add_func+0xbfc/0xeb0
Modules linked in:
CPU: 1 UID: 0 PID: 12326 Comm: syz.6.10325 Tainted: G U 6.14.0-rc5-syzkaller #0
Tainted: [U]=USER
Hardware name: Google Compute Engine/Google Compute Engine
RIP: 0010:tracepoint_add_func+0xbfc/0xeb0 kernel/tracepoint.c:294
Code: 09 fe ff 90 0f 0b 90 0f b6 74 24 43 31 ff 41 bc ea ff ff ff
RSP: 0018:ffffc9000414fb48 EFLAGS: 00010283
RAX: 00000000000012a1 RBX: ffffffff8e240ae0 RCX: ffffc90014b78000
RDX: 0000000000080000 RSI: ffffffff81bbd78b RDI: 0000000000000001
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffffffffffffffef
R13: 0000000000000000 R14: dffffc0000000000 R15: ffffffff81c264f0
FS: 00007f27217f66c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2e80dff8 CR3: 00000000268f8000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
tracepoint_probe_register_prio+0xc0/0x110 kernel/tracepoint.c:464
register_trace_prio_sched_switch include/trace/events/sched.h:222 [inline]
register_pid_events kernel/trace/trace_events.c:2354 [inline]
event_pid_write.isra.0+0x439/0x7a0 kernel/trace/trace_events.c:2425
vfs_write+0x24c/0x1150 fs/read_write.c:677
ksys_write+0x12b/0x250 fs/read_write.c:731
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
We can reproduce the warning by following the steps below:
1. echo 8 >> set_event_notrace_pid. Let tr->filtered_pids owns one pid
and register sched_switch tracepoint.
2. echo ' ' >> set_event_pid, and perform fault injection during chunk
allocation of trace_pid_list_alloc. Let pid_list with no pid and
assign to tr->filtered_pids.
3. echo ' ' >> set_event_pid. Let pid_list is NULL and assign to
tr->filtered_pids.
4. echo 9 >> set_event_pid, will trigger the double register
sched_switch tracepoint warning.
The reason is that syzkaller injects a fault into the chunk allocation
in trace_pid_list_alloc, causing a failure in trace_pid_list_set, which
may trigger double register of the same tracepoint. This only occurs
when the system is about to crash, but to suppress this warning, let's
add failure handling logic to trace_pid_list_set.
Link: https://lore.kernel.org/20250908024658.2390398-1-pulehui@huaweicloud.com
Fixes: 8d6e90983ade ("tracing: Create a sparse bitmask for pid filtering")
Reported-by: syzbot+161412ccaeff20ce4dde@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67cb890e.050a0220.d8275.022e.GAE@google.com
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3d62ab32df065e4a7797204a918f6489ddb8a237 ]
Both tracing_mark_write and tracing_mark_raw_write call
__copy_from_user_inatomic during preempt_disable. But in some case,
__copy_from_user_inatomic may trigger page fault, and will call schedule()
subtly. And if a task is migrated to other cpu, the following warning will
be trigger:
if (RB_WARN_ON(cpu_buffer,
!local_read(&cpu_buffer->committing)))
An example can illustrate this issue:
process flow CPU
---------------------------------------------------------------------
tracing_mark_raw_write(): cpu:0
...
ring_buffer_lock_reserve(): cpu:0
...
cpu = raw_smp_processor_id() cpu:0
cpu_buffer = buffer->buffers[cpu] cpu:0
...
...
__copy_from_user_inatomic(): cpu:0
...
# page fault
do_mem_abort(): cpu:0
...
# Call schedule
schedule() cpu:0
...
# the task schedule to cpu1
__buffer_unlock_commit(): cpu:1
...
ring_buffer_unlock_commit(): cpu:1
...
cpu = raw_smp_processor_id() cpu:1
cpu_buffer = buffer->buffers[cpu] cpu:1
As shown above, the process will acquire cpuid twice and the return values
are not the same.
To fix this problem using copy_from_user_nofault instead of
__copy_from_user_inatomic, as the former performs 'access_ok' before
copying.
Link: https://lore.kernel.org/20250819105152.2766363-1-luogengkun@huaweicloud.com
Fixes: 656c7f0d2d2b ("tracing: Replace kmap with copy_from_user() in trace_marker writing")
Signed-off-by: Luo Gengkun <luogengkun@huaweicloud.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4013aef2ced9b756a410f50d12df9ebe6a883e4a ]
When calling ftrace_dump_one() concurrently with reading trace_pipe,
a WARN_ON_ONCE() in trace_printk_seq() can be triggered due to a race
condition.
The issue occurs because:
CPU0 (ftrace_dump) CPU1 (reader)
echo z > /proc/sysrq-trigger
!trace_empty(&iter)
trace_iterator_reset(&iter) <- len = size = 0
cat /sys/kernel/tracing/trace_pipe
trace_find_next_entry_inc(&iter)
__find_next_entry
ring_buffer_empty_cpu <- all empty
return NULL
trace_printk_seq(&iter.seq)
WARN_ON_ONCE(s->seq.len >= s->seq.size)
In the context between trace_empty() and trace_find_next_entry_inc()
during ftrace_dump, the ring buffer data was consumed by other readers.
This caused trace_find_next_entry_inc to return NULL, failing to populate
`iter.seq`. At this point, due to the prior trace_iterator_reset, both
`iter.seq.len` and `iter.seq.size` were set to 0. Since they are equal,
the WARN_ON_ONCE condition is triggered.
Move the trace_printk_seq() into the if block that checks to make sure the
return value of trace_find_next_entry_inc() is non-NULL in
ftrace_dump_one(), ensuring the 'iter.seq' is properly populated before
subsequent operations.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ingo Molnar <mingo@elte.hu>
Link: https://lore.kernel.org/20250822033343.3000289-1-wutengda@huaweicloud.com
Fixes: d769041f8653 ("ring_buffer: implement new locking")
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6a909ea83f226803ea0e718f6e88613df9234d58 ]
When the length of the string written to set_ftrace_filter exceeds
FTRACE_BUFF_MAX, the following KASAN alarm will be triggered:
BUG: KASAN: slab-out-of-bounds in strsep+0x18c/0x1b0
Read of size 1 at addr ffff0000d00bd5ba by task ash/165
CPU: 1 UID: 0 PID: 165 Comm: ash Not tainted 6.16.0-g6bcdbd62bd56-dirty
Hardware name: linux,dummy-virt (DT)
Call trace:
show_stack+0x34/0x50 (C)
dump_stack_lvl+0xa0/0x158
print_address_description.constprop.0+0x88/0x398
print_report+0xb0/0x280
kasan_report+0xa4/0xf0
__asan_report_load1_noabort+0x20/0x30
strsep+0x18c/0x1b0
ftrace_process_regex.isra.0+0x100/0x2d8
ftrace_regex_release+0x484/0x618
__fput+0x364/0xa58
____fput+0x28/0x40
task_work_run+0x154/0x278
do_notify_resume+0x1f0/0x220
el0_svc+0xec/0xf0
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1ac/0x1b0
The reason is that trace_get_user will fail when processing a string
longer than FTRACE_BUFF_MAX, but not set the end of parser->buffer to 0.
Then an OOB access will be triggered in ftrace_regex_release->
ftrace_process_regex->strsep->strpbrk. We can solve this problem by
limiting access to parser->buffer when trace_get_user failed.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250813040232.1344527-1-pulehui@huaweicloud.com
Fixes: 8c9af478c06b ("ftrace: Handle commands when closing set_ftrace_filter file")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c89504a703fb779052213add0e8ed642f4a4f1c8 ]
Several places in the trace.c file there's a goto out where the out is
simply a return. There's no reason to jump to the out label if it's not
doing any more logic but simply returning from the function.
Replace the goto outs with a return and remove the out labels.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250801203857.538726745@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bfb336cf97df7b37b2b2edec0f69773e06d11955 upstream.
Currently the reader of set_ftrace_filter and set_ftrace_notrace just adds
the pointer to the global tracer hash to its iterator. Unlike the writer
that allocates a copy of the hash, the reader keeps the pointer to the
filter hashes. This is problematic because this pointer is static across
function calls that release the locks that can update the global tracer
hashes. This can cause UAF and similar bugs.
Allocate and copy the hash for reading the filter files like it is done
for the writers. This not only fixes UAF bugs, but also makes the code a
bit simpler as it doesn't have to differentiate when to free the
iterator's hash between writers and readers.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20250822183606.12962cc3@batman.local.home
Fixes: c20489dad156 ("ftrace: Assign iter->hash to filter or notrace hashes on seq read")
Closes: https://lore.kernel.org/all/20250813023044.2121943-1-wutengda@huaweicloud.com/
Closes: https://lore.kernel.org/all/20250822192437.GA458494@ax162/
Reported-by: Tengda Wu <wutengda@huaweicloud.com>
Tested-by: Tengda Wu <wutengda@huaweicloud.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ec879e1a0be8007aa232ffedcf6a6445dfc1a3d7 upstream.
Fprobe event accepts wildcards for the target functions, but unless user
specifies its event name, it makes an event with the wildcards.
/sys/kernel/tracing # echo 'f mutex*' >> dynamic_events
/sys/kernel/tracing # cat dynamic_events
f:fprobes/mutex*__entry mutex*
/sys/kernel/tracing # ls events/fprobes/
enable filter mutex*__entry
To fix this, replace the wildcard ('*') with an underscore.
Link: https://lore.kernel.org/all/175535345114.282990.12294108192847938710.stgit@devnote2/
Fixes: 334e5519c375 ("tracing/probes: Add fprobe events for tracing function entry and exit.")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit adc353c0bfb243ebfd29b6222fa3bf149169a6de ]
A CPU mask on the stack is broken for large values of CONFIG_NR_CPUS:
kernel/trace/preemptirq_delay_test.c: In function ‘preemptirq_delay_run’:
kernel/trace/preemptirq_delay_test.c:143:1: error: the frame size of 8512 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
Fall back to dynamic allocation here.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Song Chen <chensong_2000@189.cn>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250620111215.3365305-1-arnd@kernel.org
Fixes: 4b9091e1c194 ("kernel: trace: preemptirq_delay_test: add cpu affinity")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 85a3bce695b361d85fc528e6fbb33e4c8089c806 upstream.
We have observed kernel panics when using timerlat with stack saving,
with the following dmesg output:
memcpy: detected buffer overflow: 88 byte write of buffer size 0
WARNING: CPU: 2 PID: 8153 at lib/string_helpers.c:1032 __fortify_report+0x55/0xa0
CPU: 2 UID: 0 PID: 8153 Comm: timerlatu/2 Kdump: loaded Not tainted 6.15.3-200.fc42.x86_64 #1 PREEMPT(lazy)
Call Trace:
<TASK>
? trace_buffer_lock_reserve+0x2a/0x60
__fortify_panic+0xd/0xf
__timerlat_dump_stack.cold+0xd/0xd
timerlat_dump_stack.part.0+0x47/0x80
timerlat_fd_read+0x36d/0x390
vfs_read+0xe2/0x390
? syscall_exit_to_user_mode+0x1d5/0x210
ksys_read+0x73/0xe0
do_syscall_64+0x7b/0x160
? exc_page_fault+0x7e/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
__timerlat_dump_stack() constructs the ftrace stack entry like this:
struct stack_entry *entry;
...
memcpy(&entry->caller, fstack->calls, size);
entry->size = fstack->nr_entries;
Since commit e7186af7fb26 ("tracing: Add back FORTIFY_SOURCE logic to
kernel_stack event structure"), struct stack_entry marks its caller
field with __counted_by(size). At the time of the memcpy, entry->size
contains garbage from the ringbuffer, which under some circumstances is
zero, triggering a kernel panic by buffer overflow.
Populate the size field before the memcpy so that the out-of-bounds
check knows the correct size. This is analogous to
__ftrace_trace_stack().
Cc: stable@vger.kernel.org
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Attila Fazekas <afazekas@redhat.com>
Link: https://lore.kernel.org/20250716143601.7313-1-tglozar@redhat.com
Fixes: e7186af7fb26 ("tracing: Add back FORTIFY_SOURCE logic to kernel_stack event structure")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b5e8acc14dcb314a9b61ff19dcd9fdd0d88f70df upstream.
When a module is loaded, it adds trace events defined by the module. It
may also need to modify the modules trace printk formats to replace enum
names with their values.
If two modules are loaded at the same time, the adding of the event to the
ftrace_events list can corrupt the walking of the list in the code that is
modifying the printk format strings and crash the kernel.
The addition of the event should take the trace_event_sem for write while
it adds the new event.
Also add a lockdep_assert_held() on that semaphore in
__trace_add_event_dirs() as it iterates the list.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250718223158.799bfc0c@batman.local.home
Reported-by: Fusheng Huang(黄富生) <Fusheng.Huang@luxshare-ict.com>
Closes: https://lore.kernel.org/all/20250717105007.46ccd18f@batman.local.home/
Fixes: 110bf2b764eb6 ("tracing: add protection around module events unload")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1ed171a3afe81531b3ace96bd151a372dda3ee25 upstream.
After a recent change in clang to strengthen uninitialized warnings [1],
it points out that in one of the error paths in parse_btf_arg(), params
is used uninitialized:
kernel/trace/trace_probe.c:660:19: warning: variable 'params' is uninitialized when used here [-Wuninitialized]
660 | return PTR_ERR(params);
| ^~~~~~
Match many other NO_BTF_ENTRY error cases and return -ENOENT, clearing
up the warning.
Link: https://lore.kernel.org/all/20250715-trace_probe-fix-const-uninit-warning-v1-1-98960f91dd04@kernel.org/
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2110
Fixes: d157d7694460 ("tracing/probes: Support BTF field access from $retval")
Link: https://github.com/llvm/llvm-project/commit/2464313eef01c5b1edf0eccf57a32cdee01472c7 [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f914b52c379c12288b7623bb814d0508dbe7481d upstream.
The following issue happens with a buggy module:
BUG: unable to handle page fault for address: ffffffffc05d0218
PGD 1bd66f067 P4D 1bd66f067 PUD 1bd671067 PMD 101808067 PTE 0
Oops: Oops: 0000 [#1] SMP KASAN PTI
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
RIP: 0010:sized_strscpy+0x81/0x2f0
RSP: 0018:ffff88812d76fa08 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffffffc0601010 RCX: dffffc0000000000
RDX: 0000000000000038 RSI: dffffc0000000000 RDI: ffff88812608da2d
RBP: 8080808080808080 R08: ffff88812608da2d R09: ffff88812608da68
R10: ffff88812608d82d R11: ffff88812608d810 R12: 0000000000000038
R13: ffff88812608da2d R14: ffffffffc05d0218 R15: fefefefefefefeff
FS: 00007fef552de740(0000) GS:ffff8884251c7000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffc05d0218 CR3: 00000001146f0000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ftrace_mod_get_kallsym+0x1ac/0x590
update_iter_mod+0x239/0x5b0
s_next+0x5b/0xa0
seq_read_iter+0x8c9/0x1070
seq_read+0x249/0x3b0
proc_reg_read+0x1b0/0x280
vfs_read+0x17f/0x920
ksys_read+0xf3/0x1c0
do_syscall_64+0x5f/0x2e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The above issue may happen as follows:
(1) Add kprobe tracepoint;
(2) insmod test.ko;
(3) Module triggers ftrace disabled;
(4) rmmod test.ko;
(5) cat /proc/kallsyms; --> Will trigger UAF as test.ko already removed;
ftrace_mod_get_kallsym()
...
strscpy(module_name, mod_map->mod->name, MODULE_NAME_LEN);
...
The problem is when a module triggers an issue with ftrace and
sets ftrace_disable. The ftrace_disable is set when an anomaly is
discovered and to prevent any more damage, ftrace stops all text
modification. The issue that happened was that the ftrace_disable stops
more than just the text modification.
When a module is loaded, its init functions can also be traced. Because
kallsyms deletes the init functions after a module has loaded, ftrace
saves them when the module is loaded and function tracing is enabled. This
allows the output of the function trace to show the init function names
instead of just their raw memory addresses.
When a module is removed, ftrace_release_mod() is called, and if
ftrace_disable is set, it just returns without doing anything more. The
problem here is that it leaves the mod_list still around and if kallsyms
is called, it will call into this code and access the module memory that
has already been freed as it will return:
strscpy(module_name, mod_map->mod->name, MODULE_NAME_LEN);
Where the "mod" no longer exists and triggers a UAF bug.
Link: https://lore.kernel.org/all/20250523135452.626d8dcd@gandalf.local.home/
Cc: stable@vger.kernel.org
Fixes: aba4b5c22cba ("ftrace: Save module init functions kallsyms symbols for tracing")
Link: https://lore.kernel.org/20250529111955.2349189-2-yebin@huaweicloud.com
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3880cdbed1c4607e378f58fa924c5d6df900d1d3 ]
syzkaller reported an issue:
WARNING: CPU: 3 PID: 5971 at kernel/trace/bpf_trace.c:1861 get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861
Modules linked in:
CPU: 3 UID: 0 PID: 5971 Comm: syz-executor205 Not tainted 6.15.0-rc5-syzkaller-00038-g707df3375124 #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861
RSP: 0018:ffffc90003636fa8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000003 RCX: ffffffff81c6bc4c
RDX: ffff888032efc880 RSI: ffffffff81c6bc83 RDI: 0000000000000005
RBP: ffff88806a730860 R08: 0000000000000005 R09: 0000000000000003
R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000004
R13: 0000000000000001 R14: ffffc90003637008 R15: 0000000000000900
FS: 0000000000000000(0000) GS:ffff8880d6cdf000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7baee09130 CR3: 0000000029f5a000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1934 [inline]
bpf_get_stack_raw_tp+0x24/0x160 kernel/trace/bpf_trace.c:1931
bpf_prog_ec3b2eefa702d8d3+0x43/0x47
bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline]
__bpf_prog_run include/linux/filter.h:718 [inline]
bpf_prog_run include/linux/filter.h:725 [inline]
__bpf_trace_run kernel/trace/bpf_trace.c:2363 [inline]
bpf_trace_run3+0x23f/0x5a0 kernel/trace/bpf_trace.c:2405
__bpf_trace_mmap_lock_acquire_returned+0xfc/0x140 include/trace/events/mmap_lock.h:47
__traceiter_mmap_lock_acquire_returned+0x79/0xc0 include/trace/events/mmap_lock.h:47
__do_trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline]
trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline]
__mmap_lock_do_trace_acquire_returned+0x138/0x1f0 mm/mmap_lock.c:35
__mmap_lock_trace_acquire_returned include/linux/mmap_lock.h:36 [inline]
mmap_read_trylock include/linux/mmap_lock.h:204 [inline]
stack_map_get_build_id_offset+0x535/0x6f0 kernel/bpf/stackmap.c:157
__bpf_get_stack+0x307/0xa10 kernel/bpf/stackmap.c:483
____bpf_get_stack kernel/bpf/stackmap.c:499 [inline]
bpf_get_stack+0x32/0x40 kernel/bpf/stackmap.c:496
____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1941 [inline]
bpf_get_stack_raw_tp+0x124/0x160 kernel/trace/bpf_trace.c:1931
bpf_prog_ec3b2eefa702d8d3+0x43/0x47
Tracepoint like trace_mmap_lock_acquire_returned may cause nested call
as the corner case show above, which will be resolved with more general
method in the future. As a result, WARN_ON_ONCE will be triggered. As
Alexei suggested, remove the WARN_ON_ONCE first.
Fixes: 9594dc3c7e71 ("bpf: fix nested bpf tracepoints with per-cpu data")
Reported-by: syzbot+45b0c89a0fc7ae8dbadc@syzkaller.appspotmail.com
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250513042747.757042-1-chen.dylane@linux.dev
Closes: https://lore.kernel.org/bpf/8bc2554d-1052-4922-8832-e0078a033e1d@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c5dd28e7fb4f63475b50df4f58311df92939d011 ]
According to trigger_data_alloc() doc, trigger_data_free() should be
used to free an event_trigger_data object. This fixes a mismatch introduced
when kzalloc was replaced with trigger_data_alloc without updating
the corresponding deallocation calls.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://lore.kernel.org/20250507145455.944453325@goodmis.org
Link: https://lore.kernel.org/20250318112737.4174-1-linmq006@gmail.com
Fixes: e1f187d09e11 ("tracing: Have existing event_command.parse() implementations use helpers")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
[ SDR: Changed event_trigger_alloc/free() to trigger_data_alloc/free() ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f2947c4b7d0f235621c5daf78aecfbd6e22c05e5 ]
The function event_trigger_alloc() creates an event_trigger_data
descriptor and states that it needs to be freed via event_trigger_free().
This is incorrect, it needs to be freed by trigger_data_free() as
event_trigger_free() adds ref counting.
Rename event_trigger_alloc() to trigger_data_alloc() and state that it
needs to be freed via trigger_data_free(). This naming convention
was introducing bugs.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://lore.kernel.org/20250507145455.776436410@goodmis.org
Fixes: 86599dbe2c527 ("tracing: Add helper functions to simplify event_command.parse() callback handling")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7ab0fc61ce73040f89b12d76a8279995ec283541 ]
The histogram trigger has three somewhat large arrays on the kernel stack:
unsigned long entries[HIST_STACKTRACE_DEPTH];
u64 var_ref_vals[TRACING_MAP_VARS_MAX];
char compound_key[HIST_KEY_SIZE_MAX];
Checking the function event_hist_trigger() stack frame size, it currently
uses 816 bytes for its stack frame due to these variables!
Instead, allocate a per CPU structure that holds these arrays for each
context level (normal, softirq, irq and NMI). That is, each CPU will have
4 of these structures. This will be allocated when the first histogram
trigger is enabled and freed when the last is disabled. When the
histogram callback triggers, it will request this structure. The request
will disable preemption, get the per CPU structure at the index of the
per CPU variable, and increment that variable.
The callback will use the arrays in this structure to perform its work and
then release the structure. That in turn will simply decrement the per CPU
index and enable preemption.
Moving the variables from the kernel stack to the per CPU structure brings
the stack frame of event_hist_trigger() down to just 112 bytes.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://lore.kernel.org/20250407123851.74ea8d58@gandalf.local.home
Fixes: 067fe038e70f6 ("tracing: Add variable reference handling to hist triggers")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 2fbdb6d8e03b70668c0876e635506540ae92ab05 upstream.
On arm32, size_t is defined to be unsigned int, while PAGE_SIZE is
unsigned long. This hence triggers a compilation warning as min()
asserts the type of two operands to be equal. Casting PAGE_SIZE to size_t
solves this issue and works on other target architectures as well.
Compilation warning details:
kernel/trace/trace.c: In function 'tracing_splice_read_pipe':
./include/linux/minmax.h:20:28: warning: comparison of distinct pointer types lacks a cast
(!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
^
./include/linux/minmax.h:26:4: note: in expansion of macro '__typecheck'
(__typecheck(x, y) && __no_side_effects(x, y))
^~~~~~~~~~~
...
kernel/trace/trace.c:6771:8: note: in expansion of macro 'min'
min((size_t)trace_seq_used(&iter->seq),
^~~
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250526013731.1198030-1-pantaixi@huaweicloud.com
Fixes: f5178c41bb43 ("tracing: Fix oob write in trace_seq_to_buffer()")
Reviewed-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Pan Taixi <pantaixi@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 196a062641fe68d9bfe0ad36b6cd7628c99ad22c ]
Binary printing functions are using printf() type of format, and compiler
is not happy about them as is:
kernel/trace/trace.c:3292:9: error: function ‘trace_vbprintk’ might be a candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
kernel/trace/trace_seq.c:182:9: error: function ‘trace_seq_bprintf’ might be a candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
Fix the compilation errors by adding __printf() attribute.
While at it, move existing __printf() attributes from the implementations
to the declarations. IT also fixes incorrect attribute parameters that are
used for trace_array_printk().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250321144822.324050-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 11aff32439df6ca5b3b891b43032faf88f4a6a29 upstream.
The preemption count of the stacktrace filter command to trace ksys_read
is consistently incorrect:
$ echo ksys_read:stacktrace > set_ftrace_filter
<...>-453 [004] ...1. 38.308956: <stack trace>
=> ksys_read
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
The root cause is that the trace framework disables preemption when
invoking the filter command callback in function_trace_probe_call:
preempt_disable_notrace();
probe_ops->func(ip, parent_ip, probe_opsbe->tr, probe_ops, probe->data);
preempt_enable_notrace();
Use tracing_gen_ctx_dec() to account for the preempt_disable_notrace(),
which will output the correct preemption count:
$ echo ksys_read:stacktrace > set_ftrace_filter
<...>-410 [006] ..... 31.420396: <stack trace>
=> ksys_read
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
Cc: stable@vger.kernel.org
Fixes: 36590c50b2d07 ("tracing: Merge irqflags + preempt counter.")
Link: https://lore.kernel.org/20250512094246.1167956-2-dolinux.peng@gmail.com
Signed-off-by: pengdonglin <dolinux.peng@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e333332657f615ac2b55aa35565c4a882018bbe9 upstream.
When using the stacktrace trigger command to trace syscalls, the
preemption count was consistently reported as 1 when the system call
event itself had 0 (".").
For example:
root@ubuntu22-vm:/sys/kernel/tracing/events/syscalls/sys_enter_read
$ echo stacktrace > trigger
$ echo 1 > enable
sshd-416 [002] ..... 232.864910: sys_read(fd: a, buf: 556b1f3221d0, count: 8000)
sshd-416 [002] ...1. 232.864913: <stack trace>
=> ftrace_syscall_enter
=> syscall_trace_enter
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
The root cause is that the trace framework disables preemption in __DO_TRACE before
invoking the trigger callback.
Use the tracing_gen_ctx_dec() that will accommodate for the increase of
the preemption count in __DO_TRACE when calling the callback. The result
is the accurate reporting of:
sshd-410 [004] ..... 210.117660: sys_read(fd: 4, buf: 559b725ba130, count: 40000)
sshd-410 [004] ..... 210.117662: <stack trace>
=> ftrace_syscall_enter
=> syscall_trace_enter
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
Cc: stable@vger.kernel.org
Fixes: ce33c845b030c ("tracing: Dump stacktrace trigger to the corresponding instance")
Link: https://lore.kernel.org/20250512094246.1167956-1-dolinux.peng@gmail.com
Signed-off-by: pengdonglin <dolinux.peng@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit fd837de3c9cb1a162c69bc1fb1f438467fe7f2f5 ]
Since the shared trace_probe_log variable can be accessed and
modified via probe event create operation of kprobe_events,
uprobe_events, and dynamic_events, it should be protected.
In the dynamic_events, all operations are serialized by
`dyn_event_ops_mutex`. But kprobe_events and uprobe_events
interfaces are not serialized.
To solve this issue, introduces dyn_event_create(), which runs
create() operation under the mutex, for kprobe_events and
uprobe_events. This also uses lockdep to check the mutex is
held when using trace_probe_log* APIs.
Link: https://lore.kernel.org/all/174684868120.551552.3068655787654268804.stgit@devnote2/
Reported-by: Paul Cacheux <paulcacheux@gmail.com>
Closes: https://lore.kernel.org/all/20250510074456.805a16872b591e2971a4d221@kernel.org/
Fixes: ab105a4fb894 ("tracing: Use tracing error_log with probe events")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit f5178c41bb43444a6008150fe6094497135d07cb upstream.
syzbot reported this bug:
==================================================================
BUG: KASAN: slab-out-of-bounds in trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
BUG: KASAN: slab-out-of-bounds in tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
Write of size 4507 at addr ffff888032b6b000 by task syz.2.320/7260
CPU: 1 UID: 0 PID: 7260 Comm: syz.2.320 Not tainted 6.15.0-rc1-syzkaller-00301-g3bde70a2c827 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc3/0x670 mm/kasan/report.c:521
kasan_report+0xe0/0x110 mm/kasan/report.c:634
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
__asan_memcpy+0x3c/0x60 mm/kasan/shadow.c:106
trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
....
==================================================================
It has been reported that trace_seq_to_buffer() tries to copy more data
than PAGE_SIZE to buf. Therefore, to prevent this, we should use the
smaller of trace_seq_used(&iter->seq) and PAGE_SIZE as an argument.
Link: https://lore.kernel.org/20250422113026.13308-1-aha310510@gmail.com
Reported-by: syzbot+c8cd2d2c412b868263fb@syzkaller.appspotmail.com
Fixes: 3c56819b14b0 ("tracing: splice support for tracing_pipe")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0a8f11f8569e7ed16cbcedeb28c4350f6378fea6 upstream.
On some paths in print_event_fields() it takes the trace_event_sem for
read, even though it should always be held when the function is called.
Remove the taking of that mutex and add a lockdep_assert_held_read() to
make sure the trace_event_sem is held when print_event_fields() is called.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250501224128.0b1f0571@batman.local.home
Fixes: 80a76994b2d88 ("tracing: Add "fields" option to show raw trace event fields")
Reported-by: syzbot+441582c1592938fccf09@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6813ff5e.050a0220.14dd7d.001b.GAE@google.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4580f4e0ebdf8dc8d506ae926b88510395a0c1d1 ]
Fix the following deadlock:
CPU A
_free_event()
perf_kprobe_destroy()
mutex_lock(&event_mutex)
perf_trace_event_unreg()
synchronize_rcu_tasks_trace()
There are several paths where _free_event() grabs event_mutex
and calls sync_rcu_tasks_trace. Above is one such case.
CPU B
bpf_prog_test_run_syscall()
rcu_read_lock_trace()
bpf_prog_run_pin_on_cpu()
bpf_prog_load()
bpf_tracing_func_proto()
trace_set_clr_event()
mutex_lock(&event_mutex)
Delegate trace_set_clr_event() to workqueue to avoid
such lock dependency.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250224221637.4780-1-alexei.starovoitov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ea8d7647f9ddf1f81e2027ed305299797299aa03 ]
The trace event verifier checks the formats of trace events to make sure
that they do not point at memory that is not in the trace event itself or
in data that will never be freed. If an event references data that was
allocated when the event triggered and that same data is freed before the
event is read, then the kernel can crash by reading freed memory.
The verifier runs at boot up (or module load) and scans the print formats
of the events and checks their arguments to make sure that dereferenced
pointers are safe. If the format uses "%*p.." the verifier will ignore it,
and that could be dangerous. Cover this case as well.
Also add to the sample code a use case of "%*pbl".
Link: https://lore.kernel.org/all/bcba4d76-2c3f-4d11-baf0-02905db953dd@oracle.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 5013f454a352c ("tracing: Add check of trace event print fmts for dereferencing pointers")
Link: https://lore.kernel.org/20250327195311.2d89ec66@gandalf.local.home
Reported-by: Libo Chen <libo.chen@oracle.com>
Reviewed-by: Libo Chen <libo.chen@oracle.com>
Tested-by: Libo Chen <libo.chen@oracle.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit a8c5b0ed89a3f2c81c6ae0b041394e6eea0e7024 upstream.
The filter string testing uses strncpy_from_kernel/user_nofault() to
retrieve the string to test the filter against. The if() statement was
incorrect as it considered 0 as a fault, when it is only negative that it
faulted.
Running the following commands:
# cd /sys/kernel/tracing
# echo "filename.ustring ~ \"/proc*\"" > events/syscalls/sys_enter_openat/filter
# echo 1 > events/syscalls/sys_enter_openat/enable
# ls /proc/$$/maps
# cat trace
Would produce nothing, but with the fix it will produce something like:
ls-1192 [007] ..... 8169.828333: sys_openat(dfd: ffffffffffffff9c, filename: 7efc18359904, flags: 80000, mode: 0)
Link: https://lore.kernel.org/all/CAEf4BzbVPQ=BjWztmEwBPRKHUwNfKBkS3kce-Rzka6zvbQeVpg@mail.gmail.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250417183003.505835fb@gandalf.local.home
Fixes: 77360f9bbc7e5 ("tracing: Add test for user space strings when filtering on string pointers")
Reported-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Reported-by: Mykyta Yatsenko <mykyta.yatsenko5@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 92f1d3b40179b15630d72e2c6e4e25a899b67ba9 ]
The maximum of the ftrace hash bits is made fls(32) in
register_ftrace_direct(), which seems illogical. So, we fix it by making
the max hash bits FTRACE_HASH_MAX_BITS instead.
Link: https://lore.kernel.org/20250413014444.36724-1-dongml2@chinatelecom.cn
Fixes: d05cb470663a ("ftrace: Fix modification of direct_function hash while in use")
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 42ea22e754ba4f2b86f8760ca27f6f71da2d982c upstream.
When the kernel contains a large number of functions that can be traced,
the loop in ftrace_graph_set_hash() may take a lot of time to execute.
This may trigger the softlockup watchdog.
Add cond_resched() within the loop to allow the kernel to remain
responsive even when processing a large number of functions.
This matches the cond_resched() that is used in other locations of the
code that iterates over all functions that can be traced.
Cc: stable@vger.kernel.org
Fixes: b9b0c831bed26 ("ftrace: Convert graph filter to use hash tables")
Link: https://lore.kernel.org/tencent_3E06CE338692017B5809534B9C5C03DA7705@qq.com
Signed-off-by: zhoumin <teczm@foxmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e1a453a57bc76be678bd746f84e3d73f378a9511 upstream.
The following causes a vsnprintf fault:
# echo 's:wake_lat char[] wakee; u64 delta;' >> /sys/kernel/tracing/dynamic_events
# echo 'hist:keys=pid:ts=common_timestamp.usecs if !(common_flags & 0x18)' > /sys/kernel/tracing/events/sched/sched_waking/trigger
# echo 'hist:keys=next_pid:delta=common_timestamp.usecs-$ts:onmatch(sched.sched_waking).trace(wake_lat,next_comm,$delta)' > /sys/kernel/tracing/events/sched/sched_switch/trigger
Because the synthetic event's "wakee" field is created as a dynamic string
(even though the string copied is not). The print format to print the
dynamic string changed from "%*s" to "%s" because another location
(__set_synth_event_print_fmt()) exported this to user space, and user
space did not need that. But it is still used in print_synth_event(), and
the output looks like:
<idle>-0 [001] d..5. 193.428167: wake_lat: wakee=(efault)sshd-sessiondelta=155
sshd-session-879 [001] d..5. 193.811080: wake_lat: wakee=(efault)kworker/u34:5delta=58
<idle>-0 [002] d..5. 193.811198: wake_lat: wakee=(efault)bashdelta=91
bash-880 [002] d..5. 193.811371: wake_lat: wakee=(efault)kworker/u35:2delta=21
<idle>-0 [001] d..5. 193.811516: wake_lat: wakee=(efault)sshd-sessiondelta=129
sshd-session-879 [001] d..5. 193.967576: wake_lat: wakee=(efault)kworker/u34:5delta=50
The length isn't needed as the string is always nul terminated. Just print
the string and not add the length (which was hard coded to the max string
length anyway).
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250407154139.69955768@gandalf.local.home
Fixes: 4d38328eb442d ("tracing: Fix synth event printk format for str fields");
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit bb9c6020f4c3a07a90dc36826cb5fbe83f09efd5 ]
Add comments about entry data storing code to __store_entry_arg() and
traceprobe_get_entry_data_size(). These are a bit complicated because of
building the entry data storing code and scanning it.
This just add comments, no behavior change.
Link: https://lore.kernel.org/all/174061715004.501424.333819546601401102.stgit@devnote2/
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Closes: https://lore.kernel.org/all/20250226102223.586d7119@gandalf.local.home/
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
TRACE_REG_UNREGISTER
[ Upstream commit 0c588ac0ca6c22b774d9ad4a6594681fdfa57d9d ]
When __ftrace_event_enable_disable invokes the class callback to
unregister the event, the return value is not reported up to the
caller, hence leading to event unregister failures being silently
ignored.
This patch assigns the ret variable to the invocation of the
event unregister callback, so that its return value is stored
and reported to the caller, and it raises a warning in case
of error.
Link: https://lore.kernel.org/20250321170821.101403-1-gpaoloni@redhat.com
Signed-off-by: Gabriele Paoloni <gpaoloni@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 8eb1518642738c6892bd629b46043513a3bf1a6a upstream.
An update was made to up the module ref count when a synthetic event is
registered for both trace and perf events. But if perf is not configured
in, the perf enums used will cause the kernel to fail to build.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Link: https://lore.kernel.org/20250323152151.528b5ced@batman.local.home
Fixes: 21581dd4e7ff ("tracing: Ensure module defining synth event cannot be unloaded while tracing")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503232230.TeREVy8R-lkp@intel.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7e6b3fcc9c5294aeafed0dbe1a09a1bc899bd0f2 upstream.
Lockdep reports this deadlock log:
osnoise: could not start sampling thread
============================================
WARNING: possible recursive locking detected
--------------------------------------------
CPU0
----
lock(cpu_hotplug_lock);
lock(cpu_hotplug_lock);
Call Trace:
<TASK>
print_deadlock_bug+0x282/0x3c0
__lock_acquire+0x1610/0x29a0
lock_acquire+0xcb/0x2d0
cpus_read_lock+0x49/0x120
stop_per_cpu_kthreads+0x7/0x60
start_kthread+0x103/0x120
osnoise_hotplug_workfn+0x5e/0x90
process_one_work+0x44f/0xb30
worker_thread+0x33e/0x5e0
kthread+0x206/0x3b0
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x11/0x20
</TASK>
This is the deadlock scenario:
osnoise_hotplug_workfn()
guard(cpus_read_lock)(); // first lock call
start_kthread(cpu)
if (IS_ERR(kthread)) {
stop_per_cpu_kthreads(); {
cpus_read_lock(); // second lock call. Cause the AA deadlock
}
}
It is not necessary to call stop_per_cpu_kthreads() which stops osnoise
kthread for every other CPUs in the system if a failure occurs during
hotplug of a certain CPU.
For start_per_cpu_kthreads(), if the start_kthread() call fails,
this function calls stop_per_cpu_kthreads() to handle the error.
Therefore, similarly, there is no need to call stop_per_cpu_kthreads()
again within start_kthread().
So just remove stop_per_cpu_kthreads() from start_kthread to solve this issue.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250321095249.2739397-1-ranxiaokai627@163.com
Fixes: c8895e271f79 ("trace/osnoise: Support hotplug operations")
Signed-off-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4d38328eb442dc06aec4350fd9594ffa6488af02 upstream.
The printk format for synth event uses "%.*s" to print string fields,
but then only passes the pointer part as var arg.
Replace %.*s with %s as the C string is guaranteed to be null-terminated.
The output in print fmt should never have been updated as __get_str()
handles the string limit because it can access the length of the string in
the string meta data that is saved in the ring buffer.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 8db4d6bfbbf92 ("tracing: Change synthetic event string format to limit printed length")
Link: https://lore.kernel.org/20250325165202.541088-1-douglas.raillard@arm.com
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 21581dd4e7ff6c07d0ab577e3c32b13a74b31522 upstream.
Currently, using synth_event_delete() will fail if the event is being
used (tracing in progress), but that is normally done in the module exit
function. At that stage, failing is problematic as returning a non-zero
status means the module will become locked (impossible to unload or
reload again).
Instead, ensure the module exit function does not get called in the
first place by increasing the module refcnt when the event is enabled.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 35ca5207c2d11 ("tracing: Add synthetic event command generation functions")
Link: https://lore.kernel.org/20250318180906.226841-1-douglas.raillard@arm.com
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
switching
commit 7f81f27b1093e4895e87b74143c59c055c3b1906 upstream.
Kairui reported a UAF issue in print_graph_function_flags() during
ftrace stress testing [1]. This issue can be reproduced if puting a
'mdelay(10)' after 'mutex_unlock(&trace_types_lock)' in s_start(),
and executing the following script:
$ echo function_graph > current_tracer
$ cat trace > /dev/null &
$ sleep 5 # Ensure the 'cat' reaches the 'mdelay(10)' point
$ echo timerlat > current_tracer
The root cause lies in the two calls to print_graph_function_flags
within print_trace_line during each s_show():
* One through 'iter->trace->print_line()';
* Another through 'event->funcs->trace()', which is hidden in
print_trace_fmt() before print_trace_line returns.
Tracer switching only updates the former, while the latter continues
to use the print_line function of the old tracer, which in the script
above is print_graph_function_flags.
Moreover, when switching from the 'function_graph' tracer to the
'timerlat' tracer, s_start only calls graph_trace_close of the
'function_graph' tracer to free 'iter->private', but does not set
it to NULL. This provides an opportunity for 'event->funcs->trace()'
to use an invalid 'iter->private'.
To fix this issue, set 'iter->private' to NULL immediately after
freeing it in graph_trace_close(), ensuring that an invalid pointer
is not passed to other tracers. Additionally, clean up the unnecessary
'iter->private = NULL' during each 'cat trace' when using wakeup and
irqsoff tracers.
[1] https://lore.kernel.org/all/20231112150030.84609-1-ryncsn@gmail.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Link: https://lore.kernel.org/20250320122137.23635-1-wutengda@huaweicloud.com
Fixes: eecb91b9f98d ("tracing: Fix memleak due to race between current_tracer and trace")
Closes: https://lore.kernel.org/all/CAMgjq7BW79KDSCyp+tZHjShSzHsScSiJxn5ffskp-QzVM06fxw@mail.gmail.com/
Reported-by: Kairui Song <kasong@tencent.com>
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0b4ffbe4888a2c71185eaf5c1a02dd3586a9bc04 ]
The function event_{hist,hist_debug}_open() maintains the refcount of
'file->tr' and 'file' through tracing_open_file_tr(). However, it does
not roll back these counts on subsequent failure paths, resulting in a
refcount leak.
A very obvious case is that if the hist/hist_debug file belongs to a
specific instance, the refcount leak will prevent the deletion of that
instance, as it relies on the condition 'tr->ref == 1' within
__remove_instance().
Fix this by calling tracing_release_file_tr() on all failure paths in
event_{hist,hist_debug}_open() to correct the refcount.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Link: https://lore.kernel.org/20250314065335.1202817-1-wutengda@huaweicloud.com
Fixes: 1cc111b9cddc ("tracing: Fix uaf issue when open the hist or hist_debug file")
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 66fc6f521a0b91051ce6968a216a30bc52267bf8 ]
Since POLLIN will not be flushed until the hist file is read, the user
needs to repeatedly read() and poll() on the hist file for monitoring the
event continuously. But the read() is somewhat redundant when the user is
only monitoring for event updates.
Add POLLPRI poll event on the hist file so the event returns when a
histogram is updated after open(), poll() or read(). Thus it is possible
to wait for the next event without having to issue a read().
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/173527248770.464571.2536902137325258133.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: 0b4ffbe4888a ("tracing: Correct the refcount if the hist/hist_debug file fails to open")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1bd13edbbed6e7e396f1aab92b224a4775218e68 ]
Add poll syscall support on the `hist` file. The Waiter will be waken
up when the histogram is updated with POLLIN.
Currently, there is no way to wait for a specific event in userspace.
So user needs to peek the `trace` periodicaly, or wait on `trace_pipe`.
But it is not a good idea to peek at the `trace` for an event that
randomly happens. And `trace_pipe` is not coming back until a page is
filled with events.
This allows a user to wait for a specific event on the `hist` file. User
can set a histogram trigger on the event which they want to monitor
and poll() on its `hist` file. Since this poll() returns POLLIN, the next
poll() will return soon unless a read() happens on that hist file.
NOTE: To read the hist file again, you must set the file offset to 0,
but just for monitoring the event, you may not need to read the
histogram.
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/173527247756.464571.14236296701625509931.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: 0b4ffbe4888a ("tracing: Correct the refcount if the hist/hist_debug file fails to open")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
