summaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)AuthorFilesLines
2019-03-13bpf: Fix syscall's stackmap lookup potential deadlockMartin KaFai Lau1-2/+10
[ Upstream commit 7c4cd051add3d00bbff008a133c936c515eaa8fe ] The map_lookup_elem used to not acquiring spinlock in order to optimize the reader. It was true until commit 557c0c6e7df8 ("bpf: convert stackmap to pre-allocation") The syscall's map_lookup_elem(stackmap) calls bpf_stackmap_copy(). bpf_stackmap_copy() may find the elem no longer needed after the copy is done. If that is the case, pcpu_freelist_push() saves this elem for reuse later. This push requires a spinlock. If a tracing bpf_prog got run in the middle of the syscall's map_lookup_elem(stackmap) and this tracing bpf_prog is calling bpf_get_stackid(stackmap) which also requires the same pcpu_freelist's spinlock, it may end up with a dead lock situation as reported by Eric Dumazet in https://patchwork.ozlabs.org/patch/1030266/ The situation is the same as the syscall's map_update_elem() which needs to acquire the pcpu_freelist's spinlock and could race with tracing bpf_prog. Hence, this patch fixes it by protecting bpf_stackmap_copy() with this_cpu_inc(bpf_prog_active) to prevent tracing bpf_prog from running. A later syscall's map_lookup_elem commit f1a2e44a3aec ("bpf: add queue and stack maps") also acquires a spinlock and races with tracing bpf_prog similarly. Hence, this patch is forward looking and protects the majority of the map lookups. bpf_map_offload_lookup_elem() is the exception since it is for network bpf_prog only (i.e. never called by tracing bpf_prog). Fixes: 557c0c6e7df8 ("bpf: convert stackmap to pre-allocation") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-13bpf: fix potential deadlock in bpf_prog_registerAlexei Starovoitov1-12/+2
[ Upstream commit e16ec34039c701594d55d08a5aa49ee3e1abc821 ] Lockdep found a potential deadlock between cpu_hotplug_lock, bpf_event_mutex, and cpuctx_mutex: [ 13.007000] WARNING: possible circular locking dependency detected [ 13.007587] 5.0.0-rc3-00018-g2fa53f892422-dirty #477 Not tainted [ 13.008124] ------------------------------------------------------ [ 13.008624] test_progs/246 is trying to acquire lock: [ 13.009030] 0000000094160d1d (tracepoints_mutex){+.+.}, at: tracepoint_probe_register_prio+0x2d/0x300 [ 13.009770] [ 13.009770] but task is already holding lock: [ 13.010239] 00000000d663ef86 (bpf_event_mutex){+.+.}, at: bpf_probe_register+0x1d/0x60 [ 13.010877] [ 13.010877] which lock already depends on the new lock. [ 13.010877] [ 13.011532] [ 13.011532] the existing dependency chain (in reverse order) is: [ 13.012129] [ 13.012129] -> #4 (bpf_event_mutex){+.+.}: [ 13.012582] perf_event_query_prog_array+0x9b/0x130 [ 13.013016] _perf_ioctl+0x3aa/0x830 [ 13.013354] perf_ioctl+0x2e/0x50 [ 13.013668] do_vfs_ioctl+0x8f/0x6a0 [ 13.014003] ksys_ioctl+0x70/0x80 [ 13.014320] __x64_sys_ioctl+0x16/0x20 [ 13.014668] do_syscall_64+0x4a/0x180 [ 13.015007] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 13.015469] [ 13.015469] -> #3 (&cpuctx_mutex){+.+.}: [ 13.015910] perf_event_init_cpu+0x5a/0x90 [ 13.016291] perf_event_init+0x1b2/0x1de [ 13.016654] start_kernel+0x2b8/0x42a [ 13.016995] secondary_startup_64+0xa4/0xb0 [ 13.017382] [ 13.017382] -> #2 (pmus_lock){+.+.}: [ 13.017794] perf_event_init_cpu+0x21/0x90 [ 13.018172] cpuhp_invoke_callback+0xb3/0x960 [ 13.018573] _cpu_up+0xa7/0x140 [ 13.018871] do_cpu_up+0xa4/0xc0 [ 13.019178] smp_init+0xcd/0xd2 [ 13.019483] kernel_init_freeable+0x123/0x24f [ 13.019878] kernel_init+0xa/0x110 [ 13.020201] ret_from_fork+0x24/0x30 [ 13.020541] [ 13.020541] -> #1 (cpu_hotplug_lock.rw_sem){++++}: [ 13.021051] static_key_slow_inc+0xe/0x20 [ 13.021424] tracepoint_probe_register_prio+0x28c/0x300 [ 13.021891] perf_trace_event_init+0x11f/0x250 [ 13.022297] perf_trace_init+0x6b/0xa0 [ 13.022644] perf_tp_event_init+0x25/0x40 [ 13.023011] perf_try_init_event+0x6b/0x90 [ 13.023386] perf_event_alloc+0x9a8/0xc40 [ 13.023754] __do_sys_perf_event_open+0x1dd/0xd30 [ 13.024173] do_syscall_64+0x4a/0x180 [ 13.024519] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 13.024968] [ 13.024968] -> #0 (tracepoints_mutex){+.+.}: [ 13.025434] __mutex_lock+0x86/0x970 [ 13.025764] tracepoint_probe_register_prio+0x2d/0x300 [ 13.026215] bpf_probe_register+0x40/0x60 [ 13.026584] bpf_raw_tracepoint_open.isra.34+0xa4/0x130 [ 13.027042] __do_sys_bpf+0x94f/0x1a90 [ 13.027389] do_syscall_64+0x4a/0x180 [ 13.027727] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 13.028171] [ 13.028171] other info that might help us debug this: [ 13.028171] [ 13.028807] Chain exists of: [ 13.028807] tracepoints_mutex --> &cpuctx_mutex --> bpf_event_mutex [ 13.028807] [ 13.029666] Possible unsafe locking scenario: [ 13.029666] [ 13.030140] CPU0 CPU1 [ 13.030510] ---- ---- [ 13.030875] lock(bpf_event_mutex); [ 13.031166] lock(&cpuctx_mutex); [ 13.031645] lock(bpf_event_mutex); [ 13.032135] lock(tracepoints_mutex); [ 13.032441] [ 13.032441] *** DEADLOCK *** [ 13.032441] [ 13.032911] 1 lock held by test_progs/246: [ 13.033239] #0: 00000000d663ef86 (bpf_event_mutex){+.+.}, at: bpf_probe_register+0x1d/0x60 [ 13.033909] [ 13.033909] stack backtrace: [ 13.034258] CPU: 1 PID: 246 Comm: test_progs Not tainted 5.0.0-rc3-00018-g2fa53f892422-dirty #477 [ 13.034964] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 [ 13.035657] Call Trace: [ 13.035859] dump_stack+0x5f/0x8b [ 13.036130] print_circular_bug.isra.37+0x1ce/0x1db [ 13.036526] __lock_acquire+0x1158/0x1350 [ 13.036852] ? lock_acquire+0x98/0x190 [ 13.037154] lock_acquire+0x98/0x190 [ 13.037447] ? tracepoint_probe_register_prio+0x2d/0x300 [ 13.037876] __mutex_lock+0x86/0x970 [ 13.038167] ? tracepoint_probe_register_prio+0x2d/0x300 [ 13.038600] ? tracepoint_probe_register_prio+0x2d/0x300 [ 13.039028] ? __mutex_lock+0x86/0x970 [ 13.039337] ? __mutex_lock+0x24a/0x970 [ 13.039649] ? bpf_probe_register+0x1d/0x60 [ 13.039992] ? __bpf_trace_sched_wake_idle_without_ipi+0x10/0x10 [ 13.040478] ? tracepoint_probe_register_prio+0x2d/0x300 [ 13.040906] tracepoint_probe_register_prio+0x2d/0x300 [ 13.041325] bpf_probe_register+0x40/0x60 [ 13.041649] bpf_raw_tracepoint_open.isra.34+0xa4/0x130 [ 13.042068] ? __might_fault+0x3e/0x90 [ 13.042374] __do_sys_bpf+0x94f/0x1a90 [ 13.042678] do_syscall_64+0x4a/0x180 [ 13.042975] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 13.043382] RIP: 0033:0x7f23b10a07f9 [ 13.045155] RSP: 002b:00007ffdef42fdd8 EFLAGS: 00000202 ORIG_RAX: 0000000000000141 [ 13.045759] RAX: ffffffffffffffda RBX: 00007ffdef42ff70 RCX: 00007f23b10a07f9 [ 13.046326] RDX: 0000000000000070 RSI: 00007ffdef42fe10 RDI: 0000000000000011 [ 13.046893] RBP: 00007ffdef42fdf0 R08: 0000000000000038 R09: 00007ffdef42fe10 [ 13.047462] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000 [ 13.048029] R13: 0000000000000016 R14: 00007f23b1db4690 R15: 0000000000000000 Since tracepoints_mutex will be taken in tracepoint_probe_register/unregister() there is no need to take bpf_event_mutex too. bpf_event_mutex is protecting modifications to prog array used in kprobe/perf bpf progs. bpf_raw_tracepoints don't need to take this mutex. Fixes: c4f6699dfcb8 ("bpf: introduce BPF_RAW_TRACEPOINT") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-13bpf: fix lockdep false positive in percpu_freelistAlexei Starovoitov3-14/+35
[ Upstream commit a89fac57b5d080771efd4d71feaae19877cf68f0 ] Lockdep warns about false positive: [ 12.492084] 00000000e6b28347 (&head->lock){+...}, at: pcpu_freelist_push+0x2a/0x40 [ 12.492696] but this lock was taken by another, HARDIRQ-safe lock in the past: [ 12.493275] (&rq->lock){-.-.} [ 12.493276] [ 12.493276] [ 12.493276] and interrupts could create inverse lock ordering between them. [ 12.493276] [ 12.494435] [ 12.494435] other info that might help us debug this: [ 12.494979] Possible interrupt unsafe locking scenario: [ 12.494979] [ 12.495518] CPU0 CPU1 [ 12.495879] ---- ---- [ 12.496243] lock(&head->lock); [ 12.496502] local_irq_disable(); [ 12.496969] lock(&rq->lock); [ 12.497431] lock(&head->lock); [ 12.497890] <Interrupt> [ 12.498104] lock(&rq->lock); [ 12.498368] [ 12.498368] *** DEADLOCK *** [ 12.498368] [ 12.498837] 1 lock held by dd/276: [ 12.499110] #0: 00000000c58cb2ee (rcu_read_lock){....}, at: trace_call_bpf+0x5e/0x240 [ 12.499747] [ 12.499747] the shortest dependencies between 2nd lock and 1st lock: [ 12.500389] -> (&rq->lock){-.-.} { [ 12.500669] IN-HARDIRQ-W at: [ 12.500934] _raw_spin_lock+0x2f/0x40 [ 12.501373] scheduler_tick+0x4c/0xf0 [ 12.501812] update_process_times+0x40/0x50 [ 12.502294] tick_periodic+0x27/0xb0 [ 12.502723] tick_handle_periodic+0x1f/0x60 [ 12.503203] timer_interrupt+0x11/0x20 [ 12.503651] __handle_irq_event_percpu+0x43/0x2c0 [ 12.504167] handle_irq_event_percpu+0x20/0x50 [ 12.504674] handle_irq_event+0x37/0x60 [ 12.505139] handle_level_irq+0xa7/0x120 [ 12.505601] handle_irq+0xa1/0x150 [ 12.506018] do_IRQ+0x77/0x140 [ 12.506411] ret_from_intr+0x0/0x1d [ 12.506834] _raw_spin_unlock_irqrestore+0x53/0x60 [ 12.507362] __setup_irq+0x481/0x730 [ 12.507789] setup_irq+0x49/0x80 [ 12.508195] hpet_time_init+0x21/0x32 [ 12.508644] x86_late_time_init+0xb/0x16 [ 12.509106] start_kernel+0x390/0x42a [ 12.509554] secondary_startup_64+0xa4/0xb0 [ 12.510034] IN-SOFTIRQ-W at: [ 12.510305] _raw_spin_lock+0x2f/0x40 [ 12.510772] try_to_wake_up+0x1c7/0x4e0 [ 12.511220] swake_up_locked+0x20/0x40 [ 12.511657] swake_up_one+0x1a/0x30 [ 12.512070] rcu_process_callbacks+0xc5/0x650 [ 12.512553] __do_softirq+0xe6/0x47b [ 12.512978] irq_exit+0xc3/0xd0 [ 12.513372] smp_apic_timer_interrupt+0xa9/0x250 [ 12.513876] apic_timer_interrupt+0xf/0x20 [ 12.514343] default_idle+0x1c/0x170 [ 12.514765] do_idle+0x199/0x240 [ 12.515159] cpu_startup_entry+0x19/0x20 [ 12.515614] start_kernel+0x422/0x42a [ 12.516045] secondary_startup_64+0xa4/0xb0 [ 12.516521] INITIAL USE at: [ 12.516774] _raw_spin_lock_irqsave+0x38/0x50 [ 12.517258] rq_attach_root+0x16/0xd0 [ 12.517685] sched_init+0x2f2/0x3eb [ 12.518096] start_kernel+0x1fb/0x42a [ 12.518525] secondary_startup_64+0xa4/0xb0 [ 12.518986] } [ 12.519132] ... key at: [<ffffffff82b7bc28>] __key.71384+0x0/0x8 [ 12.519649] ... acquired at: [ 12.519892] pcpu_freelist_pop+0x7b/0xd0 [ 12.520221] bpf_get_stackid+0x1d2/0x4d0 [ 12.520563] ___bpf_prog_run+0x8b4/0x11a0 [ 12.520887] [ 12.521008] -> (&head->lock){+...} { [ 12.521292] HARDIRQ-ON-W at: [ 12.521539] _raw_spin_lock+0x2f/0x40 [ 12.521950] pcpu_freelist_push+0x2a/0x40 [ 12.522396] bpf_get_stackid+0x494/0x4d0 [ 12.522828] ___bpf_prog_run+0x8b4/0x11a0 [ 12.523296] INITIAL USE at: [ 12.523537] _raw_spin_lock+0x2f/0x40 [ 12.523944] pcpu_freelist_populate+0xc0/0x120 [ 12.524417] htab_map_alloc+0x405/0x500 [ 12.524835] __do_sys_bpf+0x1a3/0x1a90 [ 12.525253] do_syscall_64+0x4a/0x180 [ 12.525659] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 12.526167] } [ 12.526311] ... key at: [<ffffffff838f7668>] __key.13130+0x0/0x8 [ 12.526812] ... acquired at: [ 12.527047] __lock_acquire+0x521/0x1350 [ 12.527371] lock_acquire+0x98/0x190 [ 12.527680] _raw_spin_lock+0x2f/0x40 [ 12.527994] pcpu_freelist_push+0x2a/0x40 [ 12.528325] bpf_get_stackid+0x494/0x4d0 [ 12.528645] ___bpf_prog_run+0x8b4/0x11a0 [ 12.528970] [ 12.529092] [ 12.529092] stack backtrace: [ 12.529444] CPU: 0 PID: 276 Comm: dd Not tainted 5.0.0-rc3-00018-g2fa53f892422 #475 [ 12.530043] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 [ 12.530750] Call Trace: [ 12.530948] dump_stack+0x5f/0x8b [ 12.531248] check_usage_backwards+0x10c/0x120 [ 12.531598] ? ___bpf_prog_run+0x8b4/0x11a0 [ 12.531935] ? mark_lock+0x382/0x560 [ 12.532229] mark_lock+0x382/0x560 [ 12.532496] ? print_shortest_lock_dependencies+0x180/0x180 [ 12.532928] __lock_acquire+0x521/0x1350 [ 12.533271] ? find_get_entry+0x17f/0x2e0 [ 12.533586] ? find_get_entry+0x19c/0x2e0 [ 12.533902] ? lock_acquire+0x98/0x190 [ 12.534196] lock_acquire+0x98/0x190 [ 12.534482] ? pcpu_freelist_push+0x2a/0x40 [ 12.534810] _raw_spin_lock+0x2f/0x40 [ 12.535099] ? pcpu_freelist_push+0x2a/0x40 [ 12.535432] pcpu_freelist_push+0x2a/0x40 [ 12.535750] bpf_get_stackid+0x494/0x4d0 [ 12.536062] ___bpf_prog_run+0x8b4/0x11a0 It has been explained that is a false positive here: https://lkml.org/lkml/2018/7/25/756 Recap: - stackmap uses pcpu_freelist - The lock in pcpu_freelist is a percpu lock - stackmap is only used by tracing bpf_prog - A tracing bpf_prog cannot be run if another bpf_prog has already been running (ensured by the percpu bpf_prog_active counter). Eric pointed out that this lockdep splats stops other legit lockdep splats in selftests/bpf/test_progs.c. Fix this by calling local_irq_save/restore for stackmap. Another false positive had also been worked around by calling local_irq_save in commit 89ad2fa3f043 ("bpf: fix lockdep splat"). That commit added unnecessary irq_save/restore to fast path of bpf hash map. irqs are already disabled at that point, since htab is holding per bucket spin_lock with irqsave. Let's reduce overhead for htab by introducing __pcpu_freelist_push/pop function w/o irqsave and convert pcpu_freelist_push/pop to irqsave to be used elsewhere (right now only in stackmap). It stops lockdep false positive in stackmap with a bit of acceptable overhead. Fixes: 557c0c6e7df8 ("bpf: convert stackmap to pre-allocation") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-13bpf: run bpf programs with preemption disabledAlexei Starovoitov1-1/+1
[ Upstream commit 6cab5e90ab2bd323c9f3811b6c70a4687df51e27 ] Disabled preemption is necessary for proper access to per-cpu maps from BPF programs. But the sender side of socket filters didn't have preemption disabled: unix_dgram_sendmsg->sk_filter->sk_filter_trim_cap->bpf_prog_run_save_cb->BPF_PROG_RUN and a combination of af_packet with tun device didn't disable either: tpacket_snd->packet_direct_xmit->packet_pick_tx_queue->ndo_select_queue-> tun_select_queue->tun_ebpf_select_queue->bpf_prog_run_clear_cb->BPF_PROG_RUN Disable preemption before executing BPF programs (both classic and extended). Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-13relay: check return of create_buf_file() properlyGreg Kroah-Hartman1-1/+3
[ Upstream commit 2c1cf00eeacb784781cf1c9896b8af001246d339 ] If create_buf_file() returns an error, don't try to reference it later as a valid dentry pointer. This problem was exposed when debugfs started to return errors instead of just NULL for some calls when they do not succeed properly. Also, the check for WARN_ON(dentry) was just wrong :) Reported-by: Kees Cook <keescook@chromium.org> Reported-and-tested-by: syzbot+16c3a70e1e9b29346c43@syzkaller.appspotmail.com Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Rientjes <rientjes@google.com> Fixes: ff9fb72bc077 ("debugfs: return error values, not NULL") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-13psi: fix aggregation idle shut-offJohannes Weiner3-5/+45
[ Upstream commit 1b69ac6b40ebd85eed73e4dbccde2a36961ab990 ] psi has provisions to shut off the periodic aggregation worker when there is a period of no task activity - and thus no data that needs aggregating. However, while developing psi monitoring, Suren noticed that the aggregation clock currently won't stay shut off for good. Debugging this revealed a flaw in the idle design: an aggregation run will see no task activity and decide to go to sleep; shortly thereafter, the kworker thread that executed the aggregation will go idle and cause a scheduling change, during which the psi callback will kick the !pending worker again. This will ping-pong forever, and is equivalent to having no shut-off logic at all (but with more code!) Fix this by exempting aggregation workers from psi's clock waking logic when the state change is them going to sleep. To do this, tag workers with the last work function they executed, and if in psi we see a worker going to sleep after aggregating psi data, we will not reschedule the aggregation work item. What if the worker is also executing other items before or after? Any psi state times that were incurred by work items preceding the aggregation work will have been collected from the per-cpu buckets during the aggregation itself. If there are work items following the aggregation work, the worker's last_func tag will be overwritten and the aggregator will be kept alive to process this genuine new activity. If the aggregation work is the last thing the worker does, and we decide to go idle, the brief period of non-idle time incurred between the aggregation run and the kworker's dequeue will be stranded in the per-cpu buckets until the clock is woken by later activity. But that should not be a problem. The buckets can hold 4s worth of time, and future activity will wake the clock with a 2s delay, giving us 2s worth of data we can leave behind when disabling aggregation. If it takes a worker more than two seconds to go idle after it finishes its last work item, we likely have bigger problems in the system, and won't notice one sample that was averaged with a bogus per-CPU weight. Link: http://lkml.kernel.org/r/20190116193501.1910-1-hannes@cmpxchg.org Fixes: eb414681d5a0 ("psi: pressure stall information for CPU, memory, and IO") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-13perf core: Fix perf_proc_update_handler() bugStephane Eranian1-7/+7
[ Upstream commit 1a51c5da5acc6c188c917ba572eebac5f8793432 ] The perf_proc_update_handler() handles /proc/sys/kernel/perf_event_max_sample_rate syctl variable. When the PMU IRQ handler timing monitoring is disabled, i.e, when /proc/sys/kernel/perf_cpu_time_max_percent is equal to 0 or 100, then no modification to sysctl_perf_event_sample_rate is allowed to prevent possible hang from wrong values. The problem is that the test to prevent modification is made after the sysctl variable is modified in perf_proc_update_handler(). You get an error: $ echo 10001 >/proc/sys/kernel/perf_event_max_sample_rate echo: write error: invalid argument But the value is still modified causing all sorts of inconsistencies: $ cat /proc/sys/kernel/perf_event_max_sample_rate 10001 This patch fixes the problem by moving the parsing of the value after the test. Committer testing: # echo 100 > /proc/sys/kernel/perf_cpu_time_max_percent # echo 10001 > /proc/sys/kernel/perf_event_max_sample_rate -bash: echo: write error: Invalid argument # cat /proc/sys/kernel/perf_event_max_sample_rate 10001 # Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1547169436-6266-1-git-send-email-eranian@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-10bpf: fix sanitation rewrite in case of non-pointersDaniel Borkmann1-1/+2
commit 3612af783cf52c74a031a2f11b82247b2599d3cd upstream. Marek reported that he saw an issue with the below snippet in that timing measurements where off when loaded as unpriv while results were reasonable when loaded as privileged: [...] uint64_t a = bpf_ktime_get_ns(); uint64_t b = bpf_ktime_get_ns(); uint64_t delta = b - a; if ((int64_t)delta > 0) { [...] Turns out there is a bug where a corner case is missing in the fix d3bd7413e0ca ("bpf: fix sanitation of alu op with pointer / scalar type from different paths"), namely fixup_bpf_calls() only checks whether aux has a non-zero alu_state, but it also needs to test for the case of BPF_ALU_NON_POINTER since in both occasions we need to skip the masking rewrite (as there is nothing to mask). Fixes: d3bd7413e0ca ("bpf: fix sanitation of alu op with pointer / scalar type from different paths") Reported-by: Marek Majkowski <marek@cloudflare.com> Reported-by: Arthur Fabre <afabre@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/netdev/CAJPywTJqP34cK20iLM5YmUMz9KXQOdu1-+BZrGMAGgLuBWz7fg@mail.gmail.com/T/ Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-10tracing: Fix event filters and triggers to handle negative numbersPavel Tikhomirov1-1/+4
commit 6a072128d262d2b98d31626906a96700d1fc11eb upstream. Then tracing syscall exit event it is extremely useful to filter exit codes equal to some negative value, to react only to required errors. But negative numbers does not work: [root@snorch sys_exit_read]# echo "ret == -1" > filter bash: echo: write error: Invalid argument [root@snorch sys_exit_read]# cat filter ret == -1 ^ parse_error: Invalid value (did you forget quotes)? Similar thing happens when setting triggers. These is a regression in v4.17 introduced by the commit mentioned below, testing without these commit shows no problem with negative numbers. Link: http://lkml.kernel.org/r/20180823102534.7642-1-ptikhomirov@virtuozzo.com Cc: stable@vger.kernel.org Fixes: 80765597bc58 ("tracing: Rewrite filter logic to be simpler and faster") Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05locking/rwsem: Fix (possible) missed wakeupXie Yongji1-2/+9
[ Upstream commit e158488be27b157802753a59b336142dc0eb0380 ] Because wake_q_add() can imply an immediate wakeup (cmpxchg failure case), we must not rely on the wakeup being delayed. However, commit: e38513905eea ("locking/rwsem: Rework zeroing reader waiter->task") relies on exactly that behaviour in that the wakeup must not happen until after we clear waiter->task. [ peterz: Added changelog. ] Signed-off-by: Xie Yongji <xieyongji@baidu.com> Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: e38513905eea ("locking/rwsem: Rework zeroing reader waiter->task") Link: https://lkml.kernel.org/r/1543495830-2644-1-git-send-email-xieyongji@baidu.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05futex: Fix (possible) missed wakeupPeter Zijlstra1-5/+8
[ Upstream commit b061c38bef43406df8e73c5be06cbfacad5ee6ad ] We must not rely on wake_q_add() to delay the wakeup; in particular commit: 1d0dcb3ad9d3 ("futex: Implement lockless wakeups") moved wake_q_add() before smp_store_release(&q->lock_ptr, NULL), which could result in futex_wait() waking before observing ->lock_ptr == NULL and going back to sleep again. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 1d0dcb3ad9d3 ("futex: Implement lockless wakeups") Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05sched/wake_q: Fix wakeup ordering for wake_qPeter Zijlstra1-3/+4
[ Upstream commit 4c4e3731564c8945ac5ac90fc2a1e1f21cb79c92 ] Notable cmpxchg() does not provide ordering when it fails, however wake_q_add() requires ordering in this specific case too. Without this it would be possible for the concurrent wakeup to not observe our prior state. Andrea Parri provided: C wake_up_q-wake_q_add { int next = 0; int y = 0; } P0(int *next, int *y) { int r0; /* in wake_up_q() */ WRITE_ONCE(*next, 1); /* node->next = NULL */ smp_mb(); /* implied by wake_up_process() */ r0 = READ_ONCE(*y); } P1(int *next, int *y) { int r1; /* in wake_q_add() */ WRITE_ONCE(*y, 1); /* wake_cond = true */ smp_mb__before_atomic(); r1 = cmpxchg_relaxed(next, 1, 2); } exists (0:r0=0 /\ 1:r1=0) This "exists" clause cannot be satisfied according to the LKMM: Test wake_up_q-wake_q_add Allowed States 3 0:r0=0; 1:r1=1; 0:r0=1; 1:r1=0; 0:r0=1; 1:r1=1; No Witnesses Positive: 0 Negative: 3 Condition exists (0:r0=0 /\ 1:r1=0) Observation wake_up_q-wake_q_add Never 0 3 Reported-by: Yongji Xie <elohimes@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Waiman Long <longman@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05sched/wait: Fix rcuwait_wake_up() orderingPrateek Sood1-1/+1
[ Upstream commit 6dc080eeb2ba01973bfff0d79844d7a59e12542e ] For some peculiar reason rcuwait_wake_up() has the right barrier in the comment, but not in the code. This mistake has been observed to cause a deadlock in the following situation: P1 P2 percpu_up_read() percpu_down_write() rcu_sync_is_idle() // false rcu_sync_enter() ... __percpu_up_read() [S] ,- __this_cpu_dec(*sem->read_count) | smp_rmb(); [L] | task = rcu_dereference(w->task) // NULL | | [S] w->task = current | smp_mb(); | [L] readers_active_check() // fail `-> <store happens here> Where the smp_rmb() (obviously) fails to constrain the store. [ peterz: Added changelog. ] Signed-off-by: Prateek Sood <prsood@codeaurora.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Acked-by: Davidlohr Bueso <dbueso@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 8f95c90ceb54 ("sched/wait, RCU: Introduce rcuwait machinery") Link: https://lkml.kernel.org/r/1543590656-7157-1-git-send-email-prsood@codeaurora.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05genirq: Make sure the initial affinity is not emptySrinivas Ramana1-0/+3
[ Upstream commit bddda606ec76550dd63592e32a6e87e7d32583f7 ] If all CPUs in the irq_default_affinity mask are offline when an interrupt is initialized then irq_setup_affinity() can set an empty affinity mask for a newly allocated interrupt. Fix this by falling back to cpu_online_mask in case the resulting affinity mask is zero. Signed-off-by: Srinivas Ramana <sramana@codeaurora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-msm@vger.kernel.org Link: https://lkml.kernel.org/r/1545312957-8504-1-git-send-email-sramana@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-05genirq/matrix: Improve target CPU selection for managed interrupts.Long Li1-4/+30
[ Upstream commit e8da8794a7fd9eef1ec9a07f0d4897c68581c72b ] On large systems with multiple devices of the same class (e.g. NVMe disks, using managed interrupts), the kernel can affinitize these interrupts to a small subset of CPUs instead of spreading them out evenly. irq_matrix_alloc_managed() tries to select the CPU in the supplied cpumask of possible target CPUs which has the lowest number of interrupt vectors allocated. This is done by searching the CPU with the highest number of available vectors. While this is correct for non-managed CPUs it can select the wrong CPU for managed interrupts. Under certain constellations this results in affinitizing the managed interrupts of several devices to a single CPU in a set. The book keeping of available vectors works the following way: 1) Non-managed interrupts: available is decremented when the interrupt is actually requested by the device driver and a vector is assigned. It's incremented when the interrupt and the vector are freed. 2) Managed interrupts: Managed interrupts guarantee vector reservation when the MSI/MSI-X functionality of a device is enabled, which is achieved by reserving vectors in the bitmaps of the possible target CPUs. This reservation decrements the available count on each possible target CPU. When the interrupt is requested by the device driver then a vector is allocated from the reserved region. The operation is reversed when the interrupt is freed by the device driver. Neither of these operations affect the available count. The reservation persist up to the point where the MSI/MSI-X functionality is disabled and only this operation increments the available count again. For non-managed interrupts the available count is the correct selection criterion because the guaranteed reservations need to be taken into account. Using the allocated counter could lead to a failing allocation in the following situation (total vector space of 10 assumed): CPU0 CPU1 available: 2 0 allocated: 5 3 <--- CPU1 is selected, but available space = 0 managed reserved: 3 7 while available yields the correct result. For managed interrupts the available count is not the appropriate selection criterion because as explained above the available count is not affected by the actual vector allocation. The following example illustrates that. Total vector space of 10 assumed. The starting point is: CPU0 CPU1 available: 5 4 allocated: 2 3 managed reserved: 3 3 Allocating vectors for three non-managed interrupts will result in affinitizing the first two to CPU0 and the third one to CPU1 because the available count is adjusted with each allocation: CPU0 CPU1 available: 5 4 <- Select CPU0 for 1st allocation --> allocated: 3 3 available: 4 4 <- Select CPU0 for 2nd allocation --> allocated: 4 3 available: 3 4 <- Select CPU1 for 3rd allocation --> allocated: 4 4 But the allocation of three managed interrupts starting from the same point will affinitize all of them to CPU0 because the available count is not affected by the allocation (see above). So the end result is: CPU0 CPU1 available: 5 4 allocated: 5 3 Introduce a "managed_allocated" field in struct cpumap to track the vector allocation for managed interrupts separately. Use this information to select the target CPU when a vector is allocated for a managed interrupt, which results in more evenly distributed vector assignments. The above example results in the following allocations: CPU0 CPU1 managed_allocated: 0 0 <- Select CPU0 for 1st allocation --> allocated: 3 3 managed_allocated: 1 0 <- Select CPU1 for 2nd allocation --> allocated: 3 4 managed_allocated: 1 1 <- Select CPU0 for 3rd allocation --> allocated: 4 4 The allocation of non-managed interrupts is not affected by this change and is still evaluating the available count. The overall distribution of interrupt vectors for both types of interrupts might still not be perfectly even depending on the number of non-managed and managed interrupts in a system, but due to the reservation guarantee for managed interrupts this cannot be avoided. Expose the new field in debugfs as well. [ tglx: Clarified the background of the problem in the changelog and described it independent of NVME ] Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Michael Kelley <mikelley@microsoft.com> Link: https://lkml.kernel.org/r/20181106040000.27316-1-longli@linuxonhyperv.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27bpf: zero out build_id for BPF_STACK_BUILD_ID_IPStanislav Fomichev1-0/+2
[ Upstream commit 4af396ae4836c4ecab61e975b8e61270c551894d ] When returning BPF_STACK_BUILD_ID_IP from stack_map_get_build_id_offset, make sure that build_id field is empty. Since we are using percpu free list, there is a possibility that we might reuse some previous bpf_stack_build_id with non-zero build_id. Fixes: 615755a77b24 ("bpf: extend stackmap to save binary_build_id+offset instead of address") Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-27bpf: don't assume build-id length is always 20 bytesStanislav Fomichev1-2/+5
[ Upstream commit 0b698005a9d11c0e91141ec11a2c4918a129f703 ] Build-id length is not fixed to 20, it can be (`man ld` /--build-id): * 128-bit (uuid) * 160-bit (sha1) * any length specified in ld --build-id=0xhexstring To fix the issue of missing BPF_STACK_BUILD_ID_VALID for shorter build-ids, assume that build-id is somewhere in the range of 1 .. 20. Set the remaining bytes to zero. v2: * don't introduce new "len = min(BPF_BUILD_ID_SIZE, nhdr->n_descsz)", we already know that nhdr->n_descsz <= BPF_BUILD_ID_SIZE if we enter this 'if' condition Fixes: 615755a77b24 ("bpf: extend stackmap to save binary_build_id+offset instead of address") Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-27bpf: fix panic in stack_map_get_build_id() on i386 and arm32Song Liu1-1/+2
[ Upstream commit beaf3d1901f4ea46fbd5c9d857227d99751de469 ] As Naresh reported, test_stacktrace_build_id() causes panic on i386 and arm32 systems. This is caused by page_address() returns NULL in certain cases. This patch fixes this error by using kmap_atomic/kunmap_atomic instead of page_address. Fixes: 615755a77b24 (" bpf: extend stackmap to save binary_build_id+offset instead of address") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-27tracing: Fix number of entries in trace headerQuentin Perret1-0/+2
commit 9e7382153f80ba45a0bbcd540fb77d4b15f6e966 upstream. The following commit 441dae8f2f29 ("tracing: Add support for display of tgid in trace output") removed the call to print_event_info() from print_func_help_header_irq() which results in the ftrace header not reporting the number of entries written in the buffer. As this wasn't the original intent of the patch, re-introduce the call to print_event_info() to restore the orginal behaviour. Link: http://lkml.kernel.org/r/20190214152950.4179-1-quentin.perret@arm.com Acked-by: Joel Fernandes <joelaf@google.com> Cc: stable@vger.kernel.org Fixes: 441dae8f2f29 ("tracing: Add support for display of tgid in trace output") Signed-off-by: Quentin Perret <quentin.perret@arm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27kprobe: Do not use uaccess functions to access kernel memory that can faultChangbin Du1-9/+1
commit 2c4f1fcbef0bc324830bc2fb1a264c08ec93dec5 upstream. The userspace can ask kprobe to intercept strings at any memory address, including invalid kernel address. In this case, fetch_store_strlen() would crash since it uses general usercopy function, and user access functions are no longer allowed to access kernel memory. For example, we can crash the kernel by doing something as below: $ sudo kprobe 'p:do_sys_open +0(+0(%si)):string' [ 103.620391] BUG: GPF in non-whitelisted uaccess (non-canonical address?) [ 103.622104] general protection fault: 0000 [#1] SMP PTI [ 103.623424] CPU: 10 PID: 1046 Comm: cat Not tainted 5.0.0-rc3-00130-gd73aba1-dirty #96 [ 103.625321] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-2-g628b2e6-dirty-20190104_103505-linux 04/01/2014 [ 103.628284] RIP: 0010:process_fetch_insn+0x1ab/0x4b0 [ 103.629518] Code: 10 83 80 28 2e 00 00 01 31 d2 31 ff 48 8b 74 24 28 eb 0c 81 fa ff 0f 00 00 7f 1c 85 c0 75 18 66 66 90 0f ae e8 48 63 ca 89 f8 <8a> 0c 31 66 66 90 83 c2 01 84 c9 75 dc 89 54 24 34 89 44 24 28 48 [ 103.634032] RSP: 0018:ffff88845eb37ce0 EFLAGS: 00010246 [ 103.635312] RAX: 0000000000000000 RBX: ffff888456c4e5a8 RCX: 0000000000000000 [ 103.637057] RDX: 0000000000000000 RSI: 2e646c2f6374652f RDI: 0000000000000000 [ 103.638795] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 103.640556] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 [ 103.642297] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 103.644040] FS: 0000000000000000(0000) GS:ffff88846f000000(0000) knlGS:0000000000000000 [ 103.646019] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 103.647436] CR2: 00007ffc79758038 CR3: 0000000463360006 CR4: 0000000000020ee0 [ 103.649147] Call Trace: [ 103.649781] ? sched_clock_cpu+0xc/0xa0 [ 103.650747] ? do_sys_open+0x5/0x220 [ 103.651635] kprobe_trace_func+0x303/0x380 [ 103.652645] ? do_sys_open+0x5/0x220 [ 103.653528] kprobe_dispatcher+0x45/0x50 [ 103.654682] ? do_sys_open+0x1/0x220 [ 103.655875] kprobe_ftrace_handler+0x90/0xf0 [ 103.657282] ftrace_ops_assist_func+0x54/0xf0 [ 103.658564] ? __call_rcu+0x1dc/0x280 [ 103.659482] 0xffffffffc00000bf [ 103.660384] ? __ia32_sys_open+0x20/0x20 [ 103.661682] ? do_sys_open+0x1/0x220 [ 103.662863] do_sys_open+0x5/0x220 [ 103.663988] do_syscall_64+0x60/0x210 [ 103.665201] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 103.666862] RIP: 0033:0x7fc22fadccdd [ 103.668034] Code: 48 89 54 24 e0 41 83 e2 40 75 32 89 f0 25 00 00 41 00 3d 00 00 41 00 74 24 89 f2 b8 01 01 00 00 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 77 33 f3 c3 66 0f 1f 84 00 00 00 00 00 48 8d 44 [ 103.674029] RSP: 002b:00007ffc7972c3a8 EFLAGS: 00000287 ORIG_RAX: 0000000000000101 [ 103.676512] RAX: ffffffffffffffda RBX: 0000562f86147a21 RCX: 00007fc22fadccdd [ 103.678853] RDX: 0000000000080000 RSI: 00007fc22fae1428 RDI: 00000000ffffff9c [ 103.681151] RBP: ffffffffffffffff R08: 0000000000000000 R09: 0000000000000000 [ 103.683489] R10: 0000000000000000 R11: 0000000000000287 R12: 00007fc22fce90a8 [ 103.685774] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 [ 103.688056] Modules linked in: [ 103.689131] ---[ end trace 43792035c28984a1 ]--- This can be fixed by using probe_mem_read() instead, as it can handle faulting kernel memory addresses, which kprobes can legitimately do. Link: http://lkml.kernel.org/r/20190125151051.7381-1-changbin.du@gmail.com Cc: stable@vger.kernel.org Fixes: 9da3f2b7405 ("x86/fault: BUG() when uaccess helpers fault on kernel addresses") Signed-off-by: Changbin Du <changbin.du@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20signal: Restore the stop PTRACE_EVENT_EXITEric W. Biederman1-2/+5
commit cf43a757fd49442bc38f76088b70c2299eed2c2f upstream. In the middle of do_exit() there is there is a call "ptrace_event(PTRACE_EVENT_EXIT, code);" That call places the process in TACKED_TRACED aka "(TASK_WAKEKILL | __TASK_TRACED)" and waits for for the debugger to release the task or SIGKILL to be delivered. Skipping past dequeue_signal when we know a fatal signal has already been delivered resulted in SIGKILL remaining pending and TIF_SIGPENDING remaining set. This in turn caused the scheduler to not sleep in PTACE_EVENT_EXIT as it figured a fatal signal was pending. This also caused ptrace_freeze_traced in ptrace_check_attach to fail because it left a per thread SIGKILL pending which is what fatal_signal_pending tests for. This difference in signal state caused strace to report strace: Exit of unknown pid NNNNN ignored Therefore update the signal handling state like dequeue_signal would when removing a per thread SIGKILL, by removing SIGKILL from the per thread signal mask and clearing TIF_SIGPENDING. Acked-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Ivan Delalande <colona@arista.com> Cc: stable@vger.kernel.org Fixes: 35634ffa1751 ("signal: Always notice exiting tasks") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20tracing: probeevent: Correctly update remaining space in dynamic areaAndreas Ziegler1-2/+4
commit f6675872db57305fa957021efc788f9983ed3b67 upstream. Commit 9178412ddf5a ("tracing: probeevent: Return consumed bytes of dynamic area") improved the string fetching mechanism by returning the number of required bytes after copying the argument to the dynamic area. However, this return value is now only used to increment the pointer inside the dynamic area but misses updating the 'maxlen' variable which indicates the remaining space in the dynamic area. This means that fetch_store_string() always reads the *total* size of the dynamic area from the data_loc pointer instead of the *remaining* size (and passes it along to strncpy_from_{user,unsafe}) even if we're already about to copy data into the middle of the dynamic area. Link: http://lkml.kernel.org/r/20190206190013.16405-1-andreas.ziegler@fau.de Cc: Ingo Molnar <mingo@redhat.com> Cc: stable@vger.kernel.org Fixes: 9178412ddf5a ("tracing: probeevent: Return consumed bytes of dynamic area") Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Andreas Ziegler <andreas.ziegler@fau.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20perf/x86: Add check_period PMU callbackJiri Olsa1-0/+16
commit 81ec3f3c4c4d78f2d3b6689c9816bfbdf7417dbb upstream. Vince (and later on Ravi) reported crashes in the BTS code during fuzzing with the following backtrace: general protection fault: 0000 [#1] SMP PTI ... RIP: 0010:perf_prepare_sample+0x8f/0x510 ... Call Trace: <IRQ> ? intel_pmu_drain_bts_buffer+0x194/0x230 intel_pmu_drain_bts_buffer+0x160/0x230 ? tick_nohz_irq_exit+0x31/0x40 ? smp_call_function_single_interrupt+0x48/0xe0 ? call_function_single_interrupt+0xf/0x20 ? call_function_single_interrupt+0xa/0x20 ? x86_schedule_events+0x1a0/0x2f0 ? x86_pmu_commit_txn+0xb4/0x100 ? find_busiest_group+0x47/0x5d0 ? perf_event_set_state.part.42+0x12/0x50 ? perf_mux_hrtimer_restart+0x40/0xb0 intel_pmu_disable_event+0xae/0x100 ? intel_pmu_disable_event+0xae/0x100 x86_pmu_stop+0x7a/0xb0 x86_pmu_del+0x57/0x120 event_sched_out.isra.101+0x83/0x180 group_sched_out.part.103+0x57/0xe0 ctx_sched_out+0x188/0x240 ctx_resched+0xa8/0xd0 __perf_event_enable+0x193/0x1e0 event_function+0x8e/0xc0 remote_function+0x41/0x50 flush_smp_call_function_queue+0x68/0x100 generic_smp_call_function_single_interrupt+0x13/0x30 smp_call_function_single_interrupt+0x3e/0xe0 call_function_single_interrupt+0xf/0x20 </IRQ> The reason is that while event init code does several checks for BTS events and prevents several unwanted config bits for BTS event (like precise_ip), the PERF_EVENT_IOC_PERIOD allows to create BTS event without those checks being done. Following sequence will cause the crash: If we create an 'almost' BTS event with precise_ip and callchains, and it into a BTS event it will crash the perf_prepare_sample() function because precise_ip events are expected to come in with callchain data initialized, but that's not the case for intel_pmu_drain_bts_buffer() caller. Adding a check_period callback to be called before the period is changed via PERF_EVENT_IOC_PERIOD. It will deny the change if the event would become BTS. Plus adding also the limit_period check as well. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20190204123532.GA4794@krava Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20perf/core: Fix impossible ring-buffer sizes warningIngo Molnar1-1/+1
commit 528871b456026e6127d95b1b2bd8e3a003dc1614 upstream. The following commit: 9dff0aa95a32 ("perf/core: Don't WARN() for impossible ring-buffer sizes") results in perf recording failures with larger mmap areas: root@skl:/tmp# perf record -g -a failed to mmap with 12 (Cannot allocate memory) The root cause is that the following condition is buggy: if (order_base_2(size) >= MAX_ORDER) goto fail; The problem is that @size is in bytes and MAX_ORDER is in pages, so the right test is: if (order_base_2(size) >= PAGE_SHIFT+MAX_ORDER) goto fail; Fix it. Reported-by: "Jin, Yao" <yao.jin@linux.intel.com> Bisected-by: Borislav Petkov <bp@alien8.de> Analyzed-by: Peter Zijlstra <peterz@infradead.org> Cc: Julien Thierry <julien.thierry@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Fixes: 9dff0aa95a32 ("perf/core: Don't WARN() for impossible ring-buffer sizes") Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-15tracing: uprobes: Fix typo in pr_fmt stringAndreas Ziegler1-1/+1
commit ea6eb5e7d15e1838de335609994b4546e2abcaaf upstream. The subsystem-specific message prefix for uprobes was also "trace_kprobe: " instead of "trace_uprobe: " as described in the original commit message. Link: http://lkml.kernel.org/r/20190117133023.19292-1-andreas.ziegler@fau.de Cc: Ingo Molnar <mingo@redhat.com> Cc: stable@vger.kernel.org Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Fixes: 7257634135c24 ("tracing/probe: Show subsystem name in messages") Signed-off-by: Andreas Ziegler <andreas.ziegler@fau.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-15