| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 8eb1518642738c6892bd629b46043513a3bf1a6a upstream.
An update was made to up the module ref count when a synthetic event is
registered for both trace and perf events. But if perf is not configured
in, the perf enums used will cause the kernel to fail to build.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Link: https://lore.kernel.org/20250323152151.528b5ced@batman.local.home
Fixes: 21581dd4e7ff ("tracing: Ensure module defining synth event cannot be unloaded while tracing")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503232230.TeREVy8R-lkp@intel.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ea8d7647f9ddf1f81e2027ed305299797299aa03 upstream.
The trace event verifier checks the formats of trace events to make sure
that they do not point at memory that is not in the trace event itself or
in data that will never be freed. If an event references data that was
allocated when the event triggered and that same data is freed before the
event is read, then the kernel can crash by reading freed memory.
The verifier runs at boot up (or module load) and scans the print formats
of the events and checks their arguments to make sure that dereferenced
pointers are safe. If the format uses "%*p.." the verifier will ignore it,
and that could be dangerous. Cover this case as well.
Also add to the sample code a use case of "%*pbl".
Link: https://lore.kernel.org/all/bcba4d76-2c3f-4d11-baf0-02905db953dd@oracle.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 5013f454a352c ("tracing: Add check of trace event print fmts for dereferencing pointers")
Link: https://lore.kernel.org/20250327195311.2d89ec66@gandalf.local.home
Reported-by: Libo Chen <libo.chen@oracle.com>
Reviewed-by: Libo Chen <libo.chen@oracle.com>
Tested-by: Libo Chen <libo.chen@oracle.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7e6b3fcc9c5294aeafed0dbe1a09a1bc899bd0f2 upstream.
Lockdep reports this deadlock log:
osnoise: could not start sampling thread
============================================
WARNING: possible recursive locking detected
--------------------------------------------
CPU0
----
lock(cpu_hotplug_lock);
lock(cpu_hotplug_lock);
Call Trace:
<TASK>
print_deadlock_bug+0x282/0x3c0
__lock_acquire+0x1610/0x29a0
lock_acquire+0xcb/0x2d0
cpus_read_lock+0x49/0x120
stop_per_cpu_kthreads+0x7/0x60
start_kthread+0x103/0x120
osnoise_hotplug_workfn+0x5e/0x90
process_one_work+0x44f/0xb30
worker_thread+0x33e/0x5e0
kthread+0x206/0x3b0
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x11/0x20
</TASK>
This is the deadlock scenario:
osnoise_hotplug_workfn()
guard(cpus_read_lock)(); // first lock call
start_kthread(cpu)
if (IS_ERR(kthread)) {
stop_per_cpu_kthreads(); {
cpus_read_lock(); // second lock call. Cause the AA deadlock
}
}
It is not necessary to call stop_per_cpu_kthreads() which stops osnoise
kthread for every other CPUs in the system if a failure occurs during
hotplug of a certain CPU.
For start_per_cpu_kthreads(), if the start_kthread() call fails,
this function calls stop_per_cpu_kthreads() to handle the error.
Therefore, similarly, there is no need to call stop_per_cpu_kthreads()
again within start_kthread().
So just remove stop_per_cpu_kthreads() from start_kthread to solve this issue.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250321095249.2739397-1-ranxiaokai627@163.com
Fixes: c8895e271f79 ("trace/osnoise: Support hotplug operations")
Signed-off-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4d38328eb442dc06aec4350fd9594ffa6488af02 upstream.
The printk format for synth event uses "%.*s" to print string fields,
but then only passes the pointer part as var arg.
Replace %.*s with %s as the C string is guaranteed to be null-terminated.
The output in print fmt should never have been updated as __get_str()
handles the string limit because it can access the length of the string in
the string meta data that is saved in the ring buffer.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 8db4d6bfbbf92 ("tracing: Change synthetic event string format to limit printed length")
Link: https://lore.kernel.org/20250325165202.541088-1-douglas.raillard@arm.com
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 21581dd4e7ff6c07d0ab577e3c32b13a74b31522 upstream.
Currently, using synth_event_delete() will fail if the event is being
used (tracing in progress), but that is normally done in the module exit
function. At that stage, failing is problematic as returning a non-zero
status means the module will become locked (impossible to unload or
reload again).
Instead, ensure the module exit function does not get called in the
first place by increasing the module refcnt when the event is enabled.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 35ca5207c2d11 ("tracing: Add synthetic event command generation functions")
Link: https://lore.kernel.org/20250318180906.226841-1-douglas.raillard@arm.com
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
switching
commit 7f81f27b1093e4895e87b74143c59c055c3b1906 upstream.
Kairui reported a UAF issue in print_graph_function_flags() during
ftrace stress testing [1]. This issue can be reproduced if puting a
'mdelay(10)' after 'mutex_unlock(&trace_types_lock)' in s_start(),
and executing the following script:
$ echo function_graph > current_tracer
$ cat trace > /dev/null &
$ sleep 5 # Ensure the 'cat' reaches the 'mdelay(10)' point
$ echo timerlat > current_tracer
The root cause lies in the two calls to print_graph_function_flags
within print_trace_line during each s_show():
* One through 'iter->trace->print_line()';
* Another through 'event->funcs->trace()', which is hidden in
print_trace_fmt() before print_trace_line returns.
Tracer switching only updates the former, while the latter continues
to use the print_line function of the old tracer, which in the script
above is print_graph_function_flags.
Moreover, when switching from the 'function_graph' tracer to the
'timerlat' tracer, s_start only calls graph_trace_close of the
'function_graph' tracer to free 'iter->private', but does not set
it to NULL. This provides an opportunity for 'event->funcs->trace()'
to use an invalid 'iter->private'.
To fix this issue, set 'iter->private' to NULL immediately after
freeing it in graph_trace_close(), ensuring that an invalid pointer
is not passed to other tracers. Additionally, clean up the unnecessary
'iter->private = NULL' during each 'cat trace' when using wakeup and
irqsoff tracers.
[1] https://lore.kernel.org/all/20231112150030.84609-1-ryncsn@gmail.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Link: https://lore.kernel.org/20250320122137.23635-1-wutengda@huaweicloud.com
Fixes: eecb91b9f98d ("tracing: Fix memleak due to race between current_tracer and trace")
Closes: https://lore.kernel.org/all/CAMgjq7BW79KDSCyp+tZHjShSzHsScSiJxn5ffskp-QzVM06fxw@mail.gmail.com/
Reported-by: Kairui Song <kasong@tencent.com>
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fa6192adc32f4fdfe5b74edd5b210e12afd6ecc0 upstream.
Jann reported a possible issue when trampoline_check_ip returns
address near the bottom of the address space that is allowed to
call into the syscall if uretprobes are not set up:
https://lore.kernel.org/bpf/202502081235.5A6F352985@keescook/T/#m9d416df341b8fbc11737dacbcd29f0054413cbbf
Though the mmap minimum address restrictions will typically prevent
creating mappings there, let's make sure uretprobe syscall checks
for that.
Fixes: ff474a78cef5 ("uprobe: Add uretprobe syscall to speed up return probe")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250212220433.3624297-1-jolsa@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a3c3c66670cee11eb13aa43905904bf29cb92d32 ]
The perf events code fails to account for total_time_enabled of
inactive events.
Here is a failure case for accounting total_time_enabled for
CPU PMU events:
sudo ./perf stat -vvv -e armv8_pmuv3_0/event=0x08/ -e armv8_pmuv3_1/event=0x08/ -- stress-ng --pthread=2 -t 2s
...
armv8_pmuv3_0/event=0x08/: 1138698008 2289429840 2174835740
armv8_pmuv3_1/event=0x08/: 1826791390 1950025700 847648440
` ` `
` ` > total_time_running with child
` > total_time_enabled with child
> count with child
Performance counter stats for 'stress-ng --pthread=2 -t 2s':
1,138,698,008 armv8_pmuv3_0/event=0x08/ (94.99%)
1,826,791,390 armv8_pmuv3_1/event=0x08/ (43.47%)
The two events above are opened on two different CPU PMUs, for example,
each event is opened for a cluster in an Arm big.LITTLE system, they
will never run on the same CPU. In theory, the total enabled time should
be same for both events, as two events are opened and closed together.
As the result show, the two events' total enabled time including
child event is different (2289429840 vs 1950025700).
This is because child events are not accounted properly
if a event is INACTIVE state when the task exits:
perf_event_exit_event()
`> perf_remove_from_context()
`> __perf_remove_from_context()
`> perf_child_detach() -> Accumulate child_total_time_enabled
`> list_del_event() -> Update child event's time
The problem is the time accumulation happens prior to child event's
time updating. Thus, it misses to account the last period's time when
the event exits.
The perf core layer follows the rule that timekeeping is tied to state
change. To address the issue, make __perf_remove_from_context()
handle the task exit case by passing 'DETACH_EXIT' to it and
invoke perf_event_state() for state alongside with accounting the time.
Then, perf_child_detach() populates the time into the parent's time metrics.
After this patch, the bug is fixed:
sudo ./perf stat -vvv -e armv8_pmuv3_0/event=0x08/ -e armv8_pmuv3_1/event=0x08/ -- stress-ng --pthread=2 -t 10s
...
armv8_pmuv3_0/event=0x08/: 15396770398 32157963940 21898169000
armv8_pmuv3_1/event=0x08/: 22428964974 32157963940 10259794940
Performance counter stats for 'stress-ng --pthread=2 -t 10s':
15,396,770,398 armv8_pmuv3_0/event=0x08/ (68.10%)
22,428,964,974 armv8_pmuv3_1/event=0x08/ (31.90%)
[ mingo: Clarified the changelog. ]
Fixes: ef54c1a476aef ("perf: Rework perf_event_exit_event()")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20250326082003.1630986-1-yeoreum.yun@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c73f0b69648501978e8b3e8fa7eef7f4197d0481 ]
The calculation of bytes-dropped and bytes_dropped_nested is reversed.
Although it does not affect the final calculation of total_dropped,
it should still be modified.
Link: https://lore.kernel.org/20250223070106.6781-1-yangfeng59949@163.com
Fixes: 6c43e554a2a5 ("ring-buffer: Add ring buffer startup selftest")
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bbf0ec4f57e0a34983ca25f00ec90f4765572d78 ]
hw_protection_shutdown() will kick off an orderly shutdown and if that
takes longer than a configurable amount of time, an emergency shutdown
will occur.
Recently, hw_protection_reboot() was added for those systems that don't
implement a proper shutdown and are better served by rebooting and having
the boot firmware worry about doing something about the critical
condition.
On timeout of the orderly reboot of hw_protection_reboot(), the system
would go into shutdown, instead of reboot. This is not a good idea, as
going into shutdown was explicitly not asked for.
Fix this by always doing an emergency reboot if hw_protection_reboot() is
called and the orderly reboot takes too long.
Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-2-e1c09b090c0c@pengutronix.de
Fixes: 79fa723ba84c ("reboot: Introduce thermal_zone_device_critical_reboot()")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: Benson Leung <bleung@chromium.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Matteo Croce <teknoraver@meta.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rob Herring (Arm) <robh@kernel.org>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 318f05a057157c400a92f17c5f2fa3dd96f57c7e ]
Patch series "reboot: support runtime configuration of emergency
hw_protection action", v3.
We currently leave the decision of whether to shutdown or reboot to
protect hardware in an emergency situation to the individual drivers.
This works out in some cases, where the driver detecting the critical
failure has inside knowledge: It binds to the system management controller
for example or is guided by hardware description that defines what to do.
This is inadequate in the general case though as a driver reporting e.g.
an imminent power failure can't know whether a shutdown or a reboot would
be more appropriate for a given hardware platform.
To address this, this series adds a hw_protection kernel parameter and
sysfs toggle that can be used to change the action from the shutdown
default to reboot. A new hw_protection_trigger API then makes use of this
default action.
My particular use case is unattended embedded systems that don't have
support for shutdown and that power on automatically when power is
supplied:
- A brief power cycle gets detected by the driver
- The kernel powers down the system and SoC goes into shutdown mode
- Power is restored
- The system remains oblivious to the restored power
- System needs to be manually power cycled for a duration long enough
to drain the capacitors
With this series, such systems can configure the kernel with
hw_protection=reboot to have the boot firmware worry about critical
conditions.
This patch (of 12):
Currently __hw_protection_shutdown() either reboots or shuts down the
system according to its shutdown argument.
To make the logic easier to follow, both inside __hw_protection_shutdown
and at caller sites, lets replace the bool parameter with an enum.
This will be extra useful, when in a later commit, a third action is added
to the enumeration.
No functional change.
Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-0-e1c09b090c0c@pengutronix.de
Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-1-e1c09b090c0c@pengutronix.de
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Cc: Benson Leung <bleung@chromium.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Matteo Croce <teknoraver@meta.com>
Cc: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: bbf0ec4f57e0 ("reboot: reboot, not shutdown, on hw_protection_reboot timeout")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9986fb5164c8b21f6439cfd45ba36d8cc80c9710 ]
Patch series "powerpc/crash: use generic crashkernel reservation", v3.
Commit 0ab97169aa05 ("crash_core: add generic function to do reservation")
added a generic function to reserve crashkernel memory. So let's use the
same function on powerpc and remove the architecture-specific code that
essentially does the same thing.
The generic crashkernel reservation also provides a way to split the
crashkernel reservation into high and low memory reservations, which can
be enabled for powerpc in the future.
Additionally move powerpc to use generic APIs to locate memory hole for
kexec segments while loading kdump kernel.
This patch (of 7):
kexec_elf_load() loads an ELF executable and sets the address of the
lowest PT_LOAD section to the address held by the lowest_load_addr
function argument.
To determine the lowest PT_LOAD address, a local variable lowest_addr
(type unsigned long) is initialized to UINT_MAX. After loading each
PT_LOAD, its address is compared to lowest_addr. If a loaded PT_LOAD
address is lower, lowest_addr is updated. However, setting lowest_addr to
UINT_MAX won't work when the kernel image is loaded above 4G, as the
returned lowest PT_LOAD address would be invalid. This is resolved by
initializing lowest_addr to ULONG_MAX instead.
This issue was discovered while implementing crashkernel high/low
reservation on the PowerPC architecture.
Link: https://lkml.kernel.org/r/20250131113830.925179-1-sourabhjain@linux.ibm.com
Link: https://lkml.kernel.org/r/20250131113830.925179-2-sourabhjain@linux.ibm.com
Fixes: a0458284f062 ("powerpc: Add support code for kexec_file_load()")
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
__replace_page()
[ Upstream commit 096cbb80ab3fd85a9035ec17a1312c2a7db8bc8c ]
Ever since commit b756a3b5e7ea ("mm: device exclusive memory access") we
can return with a device-exclusive entry from page_vma_mapped_walk().
__replace_page() is not prepared for that, so teach it about these PFN
swap PTEs. Note that device-private entries are so far not applicable on
that path, because GUP would never have returned such folios (conversion
to device-private happens by page migration, not in-place conversion of
the PTE).
There is a race between GUP and us locking the folio to look it up using
page_vma_mapped_walk(), so this is likely a fix (unless something else
could prevent that race, but it doesn't look like). pte_pfn() on
something that is not a present pte could give use garbage, and we'd
wrongly mess up the mapcount because it was already adjusted by calling
folio_remove_rmap_pte() when making the entry device-exclusive.
Link: https://lkml.kernel.org/r/20250210193801.781278-9-david@redhat.com
Fixes: b756a3b5e7ea ("mm: device exclusive memory access")
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Alistair Popple <apopple@nvidia.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Lyude <lyude@redhat.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yanteng Si <si.yanteng@linux.dev>
Cc: Barry Song <v-songbaohua@oppo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6ebc5030e0c5a698f1dd9a6684cddf6ccaed64a0 ]
may_goto uses an additional 8 bytes on the stack, which causes the
interpreters[] array to go out of bounds when calculating index by
stack_size.
1. If a BPF program is rewritten, re-evaluate the stack size. For non-JIT
cases, reject loading directly.
2. For non-JIT cases, calculating interpreters[idx] may still cause
out-of-bounds array access, and just warn about it.
3. For jit_requested cases, the execution of bpf_func also needs to be
warned. So move the definition of function __bpf_prog_ret0_warn out of
the macro definition CONFIG_BPF_JIT_ALWAYS_ON.
Reported-by: syzbot+d2a2c639d03ac200a4f1@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/0000000000000f823606139faa5d@google.com/
Fixes: 011832b97b311 ("bpf: Introduce may_goto instruction")
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Link: https://lore.kernel.org/r/20250214091823.46042-2-mrpre@163.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b4a8b5bba712a711d8ca1f7d04646db63f9c88f5 ]
bpf_send_signal_common() uses preemptible() to check whether or not the
current context is preemptible. If it is preemptible, it will use
irq_work to send the signal asynchronously instead of trying to hold a
spin-lock, because spin-lock is sleepable under PREEMPT_RT.
However, preemptible() depends on CONFIG_PREEMPT_COUNT. When
CONFIG_PREEMPT_COUNT is turned off (e.g., CONFIG_PREEMPT_VOLUNTARY=y),
!preemptible() will be evaluated as 1 and bpf_send_signal_common() will
use irq_work unconditionally.
Fix it by unfolding "!preemptible()" and using "preempt_count() != 0 ||
irqs_disabled()" instead.
Fixes: 87c544108b61 ("bpf: Send signals asynchronously if !preemptible")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20250220042259.1583319-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dc84bc2aba85a1508f04a936f9f9a15f64ebfb31 ]
If track_pfn_copy() fails, we already added the dst VMA to the maple
tree. As fork() fails, we'll cleanup the maple tree, and stumble over
the dst VMA for which we neither performed any reservation nor copied
any page tables.
Consequently untrack_pfn() will see VM_PAT and try obtaining the
PAT information from the page table -- which fails because the page
table was not copied.
The easiest fix would be to simply clear the VM_PAT flag of the dst VMA
if track_pfn_copy() fails. However, the whole thing is about "simply"
clearing the VM_PAT flag is shaky as well: if we passed track_pfn_copy()
and performed a reservation, but copying the page tables fails, we'll
simply clear the VM_PAT flag, not properly undoing the reservation ...
which is also wrong.
So let's fix it properly: set the VM_PAT flag only if the reservation
succeeded (leaving it clear initially), and undo the reservation if
anything goes wrong while copying the page tables: clearing the VM_PAT
flag after undoing the reservation.
Note that any copied page table entries will get zapped when the VMA will
get removed later, after copy_page_range() succeeded; as VM_PAT is not set
then, we won't try cleaning VM_PAT up once more and untrack_pfn() will be
happy. Note that leaving these page tables in place without a reservation
is not a problem, as we are aborting fork(); this process will never run.
A reproducer can trigger this usually at the first try:
https://gitlab.com/davidhildenbrand/scratchspace/-/raw/main/reproducers/pat_fork.c
WARNING: CPU: 26 PID: 11650 at arch/x86/mm/pat/memtype.c:983 get_pat_info+0xf6/0x110
Modules linked in: ...
CPU: 26 UID: 0 PID: 11650 Comm: repro3 Not tainted 6.12.0-rc5+ #92
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:get_pat_info+0xf6/0x110
...
Call Trace:
<TASK>
...
untrack_pfn+0x52/0x110
unmap_single_vma+0xa6/0xe0
unmap_vmas+0x105/0x1f0
exit_mmap+0xf6/0x460
__mmput+0x4b/0x120
copy_process+0x1bf6/0x2aa0
kernel_clone+0xab/0x440
__do_sys_clone+0x66/0x90
do_syscall_64+0x95/0x180
Likely this case was missed in:
d155df53f310 ("x86/mm/pat: clear VM_PAT if copy_p4d_range failed")
... and instead of undoing the reservation we simply cleared the VM_PAT flag.
Keep the documentation of these functions in include/linux/pgtable.h,
one place is more than sufficient -- we should clean that up for the other
functions like track_pfn_remap/untrack_pfn separately.
Fixes: d155df53f310 ("x86/mm/pat: clear VM_PAT if copy_p4d_range failed")
Fixes: 2ab640379a0a ("x86: PAT: hooks in generic vm code to help archs to track pfnmap regions - v3")
Reported-by: xingwei lee <xrivendell7@gmail.com>
Reported-by: yuxin wang <wang1315768607@163.com>
Reported-by: Marius Fleischer <fleischermarius@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20250321112323.153741-1-david@redhat.com
Closes: https://lore.kernel.org/lkml/CABOYnLx_dnqzpCW99G81DmOr+2UzdmZMk=T3uxwNxwz+R1RAwg@mail.gmail.com/
Closes: https://lore.kernel.org/lkml/CAJg=8jwijTP5fre8woS4JVJQ8iUA6v+iNcsOgtj9Zfpc3obDOQ@mail.gmail.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2ff899e3516437354204423ef0a94994717b8e6a ]
Rebuilding of root domains accounting information (total_bw) is
currently broken on some cases, e.g. suspend/resume on aarch64. Problem
is that the way we keep track of domain changes and try to add bandwidth
back is convoluted and fragile.
Fix it by simplify things by making sure bandwidth accounting is cleared
and completely restored after root domains changes (after root domains
are again stable).
To be sure we always call dl_rebuild_rd_accounting while holding
cpuset_mutex we also add cpuset_reset_sched_domains() wrapper.
Fixes: 53916d5fd3c0 ("sched/deadline: Check bandwidth overflow earlier for hotplug")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Co-developed-by: Waiman Long <llong@redhat.com>
Signed-off-by: Waiman Long <llong@redhat.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/Z9MRfeJKJUOyUSto@jlelli-thinkpadt14gen4.remote.csb
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 45007c6fb5860cf63556a9cadc87c8984927e23d ]
Bandwidth checks and updates that work on root domains currently employ
a cookie mechanism for efficiency. This mechanism is very much tied to
when root domains are first created and initialized.
Generalize the cookie mechanism so that it can be used also later at
runtime while updating root domains. Also, additionally guard it with
sched_domains_mutex, since domains need to be stable while updating them
(and it will be required for further dynamic changes).
Fixes: 53916d5fd3c0 ("sched/deadline: Check bandwidth overflow earlier for hotplug")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/Z9MQaiXPvEeW_v7x@jlelli-thinkpadt14gen4.remote.csb
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 56209334dda1832c0a919e1d74768c6d0f3b2ca9 ]
Create wrappers for sched_domains_mutex so that it can transparently be
used on both CONFIG_SMP and !CONFIG_SMP, as some function will need to
do.
Fixes: 53916d5fd3c0 ("sched/deadline: Check bandwidth overflow earlier for hotplug")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/Z9MP5Oq9RB8jBs3y@jlelli-thinkpadt14gen4.remote.csb
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f6147af176eaa4027b692fdbb1a0a60dfaa1e9b6 ]
SCHED_DEADLINE special tasks get a fake bandwidth that is only used to
make sure sleeping and priority inheritance 'work', but it is ignored
for runtime enforcement and admission control.
Be consistent with it also when rebuilding root domains.
Fixes: 53916d5fd3c0 ("sched/deadline: Check bandwidth overflow earlier for hotplug")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20250313170011.357208-2-juri.lelli@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d57e94f5b891925e4f2796266eba31edd5a01903 ]
To save/restore LBR call stack data in system-wide mode, the task_struct
information is required.
Extend the parameters of sched_task() to supply task_struct information.
When schedule in, the LBR call stack data for new task will be restored.
When schedule out, the LBR call stack data for old task will be saved.
Only need to pass the required task_struct information.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250314172700.438923-4-kan.liang@linux.intel.com
Stable-dep-of: 3cec9fd03543 ("perf/x86/lbr: Fix shorter LBRs call stacks for the system-wide mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cb4369129339060218baca718a578bb0b826e734 ]
Some PMU specific data has to be saved/restored during context switch,
e.g. LBR call stack data. Currently, the data is saved in event context
structure, but only for per-process event. For system-wide event,
because of missing the LBR call stack data after context switch, LBR
callstacks are always shorter in comparison to per-process mode.
For example,
Per-process mode:
$perf record --call-graph lbr -- taskset -c 0 ./tchain_edit
- 99.90% 99.86% tchain_edit tchain_edit [.] f3
99.86% _start
__libc_start_main
generic_start_main
main
f1
- f2
f3
System-wide mode:
$perf record --call-graph lbr -a -- taskset -c 0 ./tchain_edit
- 99.88% 99.82% tchain_edit tchain_edit [.] f3
- 62.02% main
f1
f2
f3
- 28.83% f1
- f2
f3
- 28.83% f1
- f2
f3
- 8.88% generic_start_main
main
f1
f2
f3
It isn't practical to simply allocate the data for system-wide event in
CPU context structure for all tasks. We have no idea which CPU a task
will be scheduled to. The duplicated LBR data has to be maintained on
every CPU context structure. That's a huge waste. Otherwise, the LBR
data still lost if the task is scheduled to another CPU.
Save the pmu specific data in task_struct. The size of pmu specific data
is 788 bytes for LBR call stack. Usually, the overall amount of threads
doesn't exceed a few thousands. For 10K threads, keeping LBR data would
consume additional ~8MB. The additional space will only be allocated
during LBR call stack monitoring. It will be released when the
monitoring is finished.
Furthermore, moving task_ctx_data from perf_event_context to task_struct
can reduce complexity and make things clearer. E.g. perf doesn't need to
swap task_ctx_data on optimized context switch path.
This patch set is just the first step. There could be other
optimization/extension on top of this patch set. E.g. for cgroup
profiling, perf just needs to save/store the LBR call stack information
for tasks in specific cgroup. That could reduce the additional space.
Also, the LBR call stack can be available for software events, or allow
even debugging use cases, like LBRs on crash later.
Because of the alignment requirement of Intel Arch LBR, the Kmem cache
is used to allocate the PMU specific data. It's required when child task
allocates the space. Save it in struct perf_ctx_data.
The refcount in struct perf_ctx_data is used to track the users of pmu
specific data.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Link: https://lore.kernel.org/r/20250314172700.438923-1-kan.liang@linux.intel.com
Stable-dep-of: 3cec9fd03543 ("perf/x86/lbr: Fix shorter LBRs call stacks for the system-wide mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c96fff391c095c11dc87dab35be72dee7d217cde ]
The poll man page says POLLRDNORM is equivalent to POLLIN. For poll(),
it seems that if user sets pollfd with POLLRDNORM in userspace, perf_poll
will not return until timeout even if perf_output_wakeup called,
whereas POLLIN returns.
Fixes: 76369139ceb9 ("perf: Split up buffer handling from core code")
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250314030036.2543180-1-chen.dylane@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d6834d9c990333bfa433bc1816e2417f268eebbe ]
During stress-testing, we found a kmemleak report for perf_event:
unreferenced object 0xff110001410a33e0 (size 1328):
comm "kworker/4:11", pid 288, jiffies 4294916004
hex dump (first 32 bytes):
b8 be c2 3b 02 00 11 ff 22 01 00 00 00 00 ad de ...;....".......
f0 33 0a 41 01 00 11 ff f0 33 0a 41 01 00 11 ff .3.A.....3.A....
backtrace (crc 24eb7b3a):
[<00000000e211b653>] kmem_cache_alloc_node_noprof+0x269/0x2e0
[<000000009d0985fa>] perf_event_alloc+0x5f/0xcf0
[<00000000084ad4a2>] perf_event_create_kernel_counter+0x38/0x1b0
[<00000000fde96401>] hardlockup_detector_event_create+0x50/0xe0
[<0000000051183158>] watchdog_hardlockup_enable+0x17/0x70
[<00000000ac89727f>] softlockup_start_fn+0x15/0x40
...
Our stress test includes CPU online and offline cycles, and updating the
watchdog configuration.
After reading the code, I found that there may be a race between cleaning up
perf_event after updating watchdog and disabling event when the CPU goes offline:
CPU0 CPU1 CPU2
(update watchdog) (hotplug offline CPU1)
... _cpu_down(CPU1)
cpus_read_lock() // waiting for cpu lock
softlockup_start_all
smp_call_on_cpu(CPU1)
softlockup_start_fn
...
watchdog_hardlockup_enable(CPU1)
perf create E1
watchdog_ev[CPU1] = E1
cpus_read_unlock()
cpus_write_lock()
cpuhp_kick_ap_work(CPU1)
cpuhp_thread_fun
...
watchdog_hardlockup_disable(CPU1)
watchdog_ev[CPU1] = NULL
dead_event[CPU1] = E1
__lockup_detector_cleanup
for each dead_events_mask
release each dead_event
/*
* CPU1 has not been added to
* dead_events_mask, then E1
* will not be released
*/
CPU1 -> dead_events_mask
cpumask_clear(&dead_events_mask)
// dead_events_mask is cleared, E1 is leaked
In this case, the leaked perf_event E1 matches the perf_event leak
reported by kmemleak. Due to the low probability of problem recurrence
(only reported once), I added some hack delays in the code:
static void __lockup_detector_reconfigure(void)
{
...
watchdog_hardlockup_start();
cpus_read_unlock();
+ mdelay(100);
/*
* Must be called outside the cpus locked section to prevent
* recursive locking in the perf code.
...
}
void watchdog_hardlockup_disable(unsigned int cpu)
{
...
perf_event_disable(event);
this_cpu_write(watchdog_ev, NULL);
this_cpu_write(dead_event, event);
+ mdelay(100);
cpumask_set_cpu(smp_processor_id(), &dead_events_mask);
atomic_dec(&watchdog_cpus);
...
}
void hardlockup_detector_perf_cleanup(void)
{
...
perf_event_release_kernel(event);
per_cpu(dead_event, cpu) = NULL;
}
+ mdelay(100);
cpumask_clear(&dead_events_mask);
}
Then, simultaneously performing CPU on/off and switching watchdog, it is
almost certain to reproduce this leak.
The problem here is that releasing perf_event is not within the CPU
hotplug read-write lock. Commit:
941154bd6937 ("watchdog/hardlockup/perf: Prevent CPU hotplug deadlock")
introduced deferred release to solve the deadlock caused by calling
get_online_cpus() when releasing perf_event. Later, commit:
efe951d3de91 ("perf/x86: Fix perf,x86,cpuhp deadlock")
removed the get_online_cpus() call on the perf_event release path to solve
another deadlock problem.
Therefore, it is now possible to move the release of perf_event back
into the CPU hotplug read-write lock, and release the event immediately
after disabling it.
Fixes: 941154bd6937 ("watchdog/hardlockup/perf: Prevent CPU hotplug deadlock")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241021193004.308303-1-lihuafei1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 79e10dad1ce3feac7937bedf911d92f486a9e76a ]
With CONFIG_DEBUG_RSEQ=y, an in-kernel copy of the read-only fields is
kept synchronized with the user-space fields. Ensure the updates are
done in lockstep in case we error out on a write to user-space.
Fixes: 7d5265ffcd8b ("rseq: Validate read-only fields under DEBUG_RSEQ config")
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20250225202500.731245-1-mjeanson@efficios.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 563bc2161b94571ea425bbe2cf69fd38e24cdedf ]
When a task is enqueued and its parent cgroup se is already on_rq, this
parent cgroup se will not be enqueued again, and hence the root->min_slice
leaves unchanged. The same issue happens when a task is dequeued and its
parent cgroup se has other runnable entities, and the parent cgroup se
will not be dequeued.
Force propagating min_slice when se doesn't need to be enqueued or
dequeued. Ensure the se hierarchy always get the latest min_slice.
Fixes: aef6987d8954 ("sched/eevdf: Propagate min_slice up the cgroup hierarchy")
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250211063659.7180-1-dtcccc@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f553741ac8c0e467a3b873e305f34b902e50b86d ]
A wakeup non-idle entity should preempt idle entity at any time,
but because of the slice protection of the idle entity, the non-idle
entity has to wait, so just cancel it.
This patch is aimed at minimizing the impact of SCHED_IDLE on
SCHED_NORMAL. For example, a task with SCHED_IDLE policy that sleeps for
1s and then runs for 3 ms, running cyclictest on the same cpu, has a
maximum latency of 3 ms, which is caused by the slice protection of the
idle entity. It is unreasonable. With this patch, the cyclictest latency
under the same conditions is basically the same on the cpu with idle
processes and on empty cpu.
[peterz: add helpers]
Fixes: 63304558ba5d ("sched/eevdf: Curb wakeup-preemption")
Signed-off-by: zihan zhou <15645113830zzh@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20250208080850.16300-1-15645113830zzh@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b37778bec82ba82058912ca069881397197cd3d5 ]
Depending on CONFIG_HAVE_ARCH_SECCOMP_FILTER, __secure_computing(NULL)
will crash or not. This is not consistent/safe, especially considering
that after the previous change __secure_computing(sd) is always called
with sd == NULL.
Fortunately, if CONFIG_HAVE_ARCH_SECCOMP_FILTER=n, __secure_computing()
has no callers, these architectures use secure_computing_strict(). Yet
it make sense make __secure_computing(NULL) safe in this case.
Note also that with this change we can unexport secure_computing_strict()
and change the current callers to use __secure_computing(NULL).
Fixes: 8cf8dfceebda ("seccomp: Stub for !HAVE_ARCH_SECCOMP_FILTER")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250128150307.GA15325@redhat.com
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f13abc1e8e1a3b7455511c4e122750127f6bc9b0 ]
Currently, watch_queue_set_size() modifies the pipe buffers charged to
user->pipe_bufs without updating the pipe->nr_accounted on the pipe
itself, due to the if (!pipe_has_watch_queue()) test in
pipe_resize_ring(). This means that when the pipe is ultimately freed,
we decrement user->pipe_bufs by something other than what than we had
charged to it, potentially leading to an underflow. This in turn can
cause subsequent too_many_pipe_buffers_soft() tests to fail with -EPERM.
To remedy this, explicitly account for the pipe usage in
watch_queue_set_size() to match the number set via account_pipe_buffers()
(It's unclear why watch_queue_set_size() does not update nr_accounted;
it may be due to intentional overprovisioning in watch_queue_set_size()?)
Fixes: e95aada4cb93d ("pipe: wakeup wr_wait after setting max_usage")
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Link: https://lore.kernel.org/r/206682a8-0604-49e5-8224-fdbe0c12b460@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit c4af66a95aa3bc1d4f607ebd4eea524fb58946e3 upstream.
The commit b824766504e4 ("cgroup/rstat: add force idle show helper")
retrieves forceidle_time outside cgroup_rstat_lock for non-root cgroups
which can be potentially inconsistent with oth |
