| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 61399e0c5410567ef60cb1cda34cca42903842e3 upstream.
RCU re-initializes the deferred QS irq work everytime before attempting
to queue it. However there are situations where the irq work is
attempted to be queued even though it is already queued. In that case
re-initializing messes-up with the irq work queue that is about to be
handled.
The chances for that to happen are higher when the architecture doesn't
support self-IPIs and irq work are then all lazy, such as with the
following sequence:
1) rcu_read_unlock() is called when IRQs are disabled and there is a
grace period involving blocked tasks on the node. The irq work
is then initialized and queued.
2) The related tasks are unblocked and the CPU quiescent state
is reported. rdp->defer_qs_iw_pending is reset to DEFER_QS_IDLE,
allowing the irq work to be requeued in the future (note the previous
one hasn't fired yet).
3) A new grace period starts and the node has blocked tasks.
4) rcu_read_unlock() is called when IRQs are disabled again. The irq work
is re-initialized (but it's queued! and its node is cleared) and
requeued. Which means it's requeued to itself.
5) The irq work finally fires with the tick. But since it was requeued
to itself, it loops and hangs.
Fix this with initializing the irq work only once before the CPU boots.
Fixes: b41642c87716 ("rcu: Fix rcu_read_unlock() deadloop due to IRQ work")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202508071303.c1134cce-lkp@intel.com
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a3e892ab0fc287389176eabdcd74234508f6e52d upstream.
Since preempt_count_add/del() are tracable functions, it is not allowed
to use preempt_disable/enable() in ftrace handlers. Without this fix,
probing on `preempt_count_add%return` will cause an infinite recursion
of fprobes.
To fix this problem, use preempt_disable/enable_notrace() in
fprobe_return().
Link: https://lore.kernel.org/all/175374642359.1471729.1054175011228386560.stgit@mhiramat.tok.corp.google.com/
Fixes: 4346ba160409 ("fprobe: Rewrite fprobe on function-graph tracer")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 626c54af35764b0b8a4ed5c446458ba6ddfe9cc8 ]
When a header file is changed, kernel/gen_kheaders.sh may fail to update
kernel/kheaders_data.tar.xz.
[steps to reproduce]
[1] Build kernel/kheaders_data.tar.xz
$ make -j$(nproc) kernel/kheaders.o
DESCEND objtool
INSTALL libsubcmd_headers
CALL scripts/checksyscalls.sh
CHK kernel/kheaders_data.tar.xz
GEN kernel/kheaders_data.tar.xz
CC kernel/kheaders.o
[2] Modify a header without changing the file size
$ sed -i s/0xdeadbeef/0xfeedbeef/ include/linux/elfnote.h
[3] Rebuild kernel/kheaders_data.tar.xz
$ make -j$(nproc) kernel/kheaders.o
DESCEND objtool
INSTALL libsubcmd_headers
CALL scripts/checksyscalls.sh
CHK kernel/kheaders_data.tar.xz
kernel/kheaders_data.tar.xz is not updated if steps [1] - [3] are run
within the same minute.
The headers_md5 variable stores the MD5 hash of the 'ls -l' output
for all header files. This hash value is used to determine whether
kheaders_data.tar.xz needs to be rebuilt. However, 'ls -l' prints the
modification times with minute-level granularity. If a file is modified
within the same minute and its size remains the same, the MD5 hash does
not change.
To reliably detect file modifications, this commit rewrites
kernel/gen_kheaders.sh to output header dependencies to
kernel/.kheaders_data.tar.xz.cmd. Then, Make compares the timestamps
and reruns kernel/gen_kheaders.sh when necessary. This is the standard
mechanism used by Make and Kbuild.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 571c1ea91a73db56bd94054fabecd0f070dc90db ]
If a console printer is interrupted during panic, it will never
be able to reacquire ownership in order to perform and cleanup.
That in itself is not a problem, since the non-panic CPU will
simply quiesce in an endless loop within nbcon_reacquire_nobuf().
However, in this state, platforms that do not support a true NMI
to interrupt the quiesced CPU will not be able to shutdown that
CPU from within panic(). This then causes problems for such as
being unable to load and run a kdump kernel.
Fix this by allowing non-panic CPUs to reacquire ownership using
a direct acquire. Then the non-panic CPUs can successfullyl exit
the nbcon_reacquire_nobuf() loop and the console driver can
perform any necessary cleanup. But more importantly, the CPU is
no longer quiesced and is free to process any interrupts
necessary for panic() to shutdown the CPU.
All other forms of acquire are still not allowed for non-panic
CPUs since it is safer to have them avoid gaining console
ownership that is not strictly necessary.
Reported-by: Michael Kelley <mhklinux@outlook.com>
Closes: https://lore.kernel.org/r/SN6PR02MB4157A4C5E8CB219A75263A17D46DA@SN6PR02MB4157.namprd02.prod.outlook.com
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20250606185549.900611-1-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a6323bd4e611567913e23df5b58f2d4e4da06789 ]
Passing a module name longer than MODULE_NAME_LEN to the delete_module
syscall results in its silent truncation. This really isn't much of
a problem in practice, but it could theoretically lead to the removal of an
incorrect module. It is more sensible to return ENAMETOOLONG or ENOENT in
such a case.
Update the syscall to return ENOENT, as documented in the delete_module(2)
man page to mean "No module by that name exists." This is appropriate
because a module with a name longer than MODULE_NAME_LEN cannot be loaded
in the first place.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250630143535.267745-2-petr.pavlu@suse.com
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b41642c87716bbd09797b1e4ea7d904f06c39b7b ]
During rcu_read_unlock_special(), if this happens during irq_exit(), we
can lockup if an IPI is issued. This is because the IPI itself triggers
the irq_exit() path causing a recursive lock up.
This is precisely what Xiongfeng found when invoking a BPF program on
the trace_tick_stop() tracepoint As shown in the trace below. Fix by
managing the irq_work state correctly.
irq_exit()
__irq_exit_rcu()
/* in_hardirq() returns false after this */
preempt_count_sub(HARDIRQ_OFFSET)
tick_irq_exit()
tick_nohz_irq_exit()
tick_nohz_stop_sched_tick()
trace_tick_stop() /* a bpf prog is hooked on this trace point */
__bpf_trace_tick_stop()
bpf_trace_run2()
rcu_read_unlock_special()
/* will send a IPI to itself */
irq_work_queue_on(&rdp->defer_qs_iw, rdp->cpu);
A simple reproducer can also be obtained by doing the following in
tick_irq_exit(). It will hang on boot without the patch:
static inline void tick_irq_exit(void)
{
+ rcu_read_lock();
+ WRITE_ONCE(current->rcu_read_unlock_special.b.need_qs, true);
+ rcu_read_unlock();
+
Reported-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Closes: https://lore.kernel.org/all/9acd5f9f-6732-7701-6880-4b51190aa070@huawei.com/
Tested-by: Qi Xi <xiqi2@huawei.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: "Paul E. McKenney" <paulmck@kernel.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
[neeraj: Apply Frederic's suggested fix for PREEMPT_RT]
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5534e58f2e9bd72b253d033ee0af6e68eb8ac96b ]
When reg->type is CONST_PTR_TO_MAP, it can not be null. However the
verifier explores the branches under rX == 0 in check_cond_jmp_op()
even if reg->type is CONST_PTR_TO_MAP, because it was not checked for
in reg_not_null().
Fix this by adding CONST_PTR_TO_MAP to the set of types that are
considered non nullable in reg_not_null().
An old "unpriv: cmp map pointer with zero" selftest fails with this
change, because now early out correctly triggers in
check_cond_jmp_op(), making the verification to pass.
In practice verifier may allow pointer to null comparison in unpriv,
since in many cases the relevant branch and comparison op are removed
as dead code. So change the expected test result to __success_unpriv.
Signed-off-by: Ihor Solodrai <isolodrai@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250609183024.359974-2-isolodrai@meta.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8d71351d88e478d3c4e945e3218e97ec677fd807 ]
For built with CONFIG_PREEMPT_RT=y kernels, running rcutorture
tests resulted in the following splat:
[ 68.797425] rcutorture_one_extend_check during change: Current 0x1 To add 0x1 To remove 0x0 preempt_count() 0x0
[ 68.797533] WARNING: CPU: 2 PID: 512 at kernel/rcu/rcutorture.c:1993 rcutorture_one_extend_check+0x419/0x560 [rcutorture]
[ 68.797601] Call Trace:
[ 68.797602] <TASK>
[ 68.797619] ? lockdep_softirqs_off+0xa5/0x160
[ 68.797631] rcutorture_one_extend+0x18e/0xcc0 [rcutorture 2466dbd2ff34dbaa36049cb323a80c3306ac997c]
[ 68.797646] ? local_clock+0x19/0x40
[ 68.797659] rcu_torture_one_read+0xf0/0x280 [rcutorture 2466dbd2ff34dbaa36049cb323a80c3306ac997c]
[ 68.797678] ? __pfx_rcu_torture_one_read+0x10/0x10 [rcutorture 2466dbd2ff34dbaa36049cb323a80c3306ac997c]
[ 68.797804] ? __pfx_rcu_torture_timer+0x10/0x10 [rcutorture 2466dbd2ff34dbaa36049cb323a80c3306ac997c]
[ 68.797815] rcu-torture: rcu_torture_reader task started
[ 68.797824] rcu-torture: Creating rcu_torture_reader task
[ 68.797824] rcu_torture_reader+0x238/0x580 [rcutorture 2466dbd2ff34dbaa36049cb323a80c3306ac997c]
[ 68.797836] ? kvm_sched_clock_read+0x15/0x30
Disable BH does not change the SOFTIRQ corresponding bits in
preempt_count() for RT kernels, this commit therefore use
softirq_count() to check the if BH is disabled.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1bba3900ca18bdae28d1b9fa10f16a8f8cb2ada1 ]
In the preparation stage of CPU online, if the corresponding
the rdp's->nocb_cb_kthread does not exist, will be created,
there is a situation where the rdp's rcuop kthreads creation fails,
and then de-offload this CPU's rdp, does not assign this CPU's
rdp->nocb_cb_kthread pointer, but this rdp's->nocb_gp_rdp and
rdp's->rdp_gp->nocb_gp_kthread is still valid.
This will cause the subsequent re-offload operation of this offline
CPU, which will pass the conditional check and the kthread_unpark()
will access invalid rdp's->nocb_cb_kthread pointer.
This commit therefore use rdp's->nocb_gp_kthread instead of
rdp_gp's->nocb_gp_kthread for safety check.
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 155213a2aed42c85361bf4f5c817f5cb68951c3b ]
schbench (https://github.com/masoncl/schbench.git) is showing a
regression from previous production kernels that bisected down to:
sched/fair: Remove sysctl_sched_migration_cost condition (c5b0a7eefc)
The schbench command line was:
schbench -L -m 4 -M auto -t 256 -n 0 -r 0 -s 0
This creates 4 message threads pinned to CPUs 0-3, and 256x4 worker
threads spread across the rest of the CPUs. Neither the worker threads
or the message threads do any work, they just wake each other up and go
back to sleep as soon as possible.
The end result is the first 4 CPUs are pegged waking up those 1024
workers, and the rest of the CPUs are constantly banging in and out of
idle. If I take a v6.9 Linus kernel and revert that one commit,
performance goes from 3.4M RPS to 5.4M RPS.
schedstat shows there are ~100x more new idle balance operations, and
profiling shows the worker threads are spending ~20% of their CPU time
on new idle balance. schedstats also shows that almost all of these new
idle balance attemps are failing to find busy groups.
The fix used here is to crank up the cost of the newidle balance whenever it
fails. Since we don't want sd->max_newidle_lb_cost to grow out of
control, this also changes update_newidle_cost() to use
sysctl_sched_migration_cost as the upper limit on max_newidle_lb_cost.
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20250626144017.1510594-2-clm@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2d088762631b212eb0809e112642843844ef64eb ]
Without "#undef TRACE_INCLUDE_FILE", there could be a build error due to
TRACE_INCLUDE_FILE being redefined. Therefore add it.
Also fix a typo while at it.
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/f805e074581e927bb176c742c981fa7675b6ebe5.1752088709.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6279846b9b2532e1b04559ef8bd0dec049f29383 ]
Syzbot reported a kernel warning due to a range invariant violation on
the following BPF program.
0: call bpf_get_netns_cookie
1: if r0 == 0 goto <exit>
2: if r0 & Oxffffffff goto <exit>
The issue is on the path where we fall through both jumps.
That path is unreachable at runtime: after insn 1, we know r0 != 0, but
with the sign extension on the jset, we would only fallthrough insn 2
if r0 == 0. Unfortunately, is_branch_taken() isn't currently able to
figure this out, so the verifier walks all branches. The verifier then
refines the register bounds using the second condition and we end
up with inconsistent bounds on this unreachable path:
1: if r0 == 0 goto <exit>
r0: u64=[0x1, 0xffffffffffffffff] var_off=(0, 0xffffffffffffffff)
2: if r0 & 0xffffffff goto <exit>
r0 before reg_bounds_sync: u64=[0x1, 0xffffffffffffffff] var_off=(0, 0)
r0 after reg_bounds_sync: u64=[0x1, 0] var_off=(0, 0)
Improving the range refinement for JSET to cover all cases is tricky. We
also don't expect many users to rely on JSET given LLVM doesn't generate
those instructions. So instead of improving the range refinement for
JSETs, Eduard suggested we forget the ranges whenever we're narrowing
tnums after a JSET. This patch implements that approach.
Reported-by: syzbot+c711ce17dd78e5d4fdcf@syzkaller.appspotmail.com
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/9d4fd6432a095d281f815770608fdcd16028ce0b.1752171365.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 440989c10f4e32620e9e2717ca52c3ed7ae11048 ]
A global limits change (sched_rt_handler() logic) currently leaves stale
and/or incorrect values in variables related to accounting (e.g.
extra_bw).
Properly clean up per runqueue variables before implementing the change
and rebuild scheduling domains (so that accounting is also properly
restored) after such a change is complete.
Reported-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk> # nuc & rock5b
Link: https://lore.kernel.org/r/20250627115118.438797-4-juri.lelli@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 90c09d57caeca94e6f3f87c49e96a91edd40cbfd ]
On kernels built with CONFIG_IRQ_WORK=y, when rcu_read_unlock() is
invoked within an interrupts-disabled region of code [1], it will invoke
rcu_read_unlock_special(), which uses an irq-work handler to force the
system to notice when the RCU read-side critical section actually ends.
That end won't happen until interrupts are enabled at the soonest.
In some kernels, such as those booted with rcutree.use_softirq=y, the
irq-work handler is used unconditionally.
The per-CPU rcu_data structure's ->defer_qs_iw_pending field is
updated by the irq-work handler and is both read and updated by
rcu_read_unlock_special(). This resulted in the following KCSAN splat:
------------------------------------------------------------------------
BUG: KCSAN: data-race in rcu_preempt_deferred_qs_handler / rcu_read_unlock_special
read to 0xffff96b95f42d8d8 of 1 bytes by task 90 on cpu 8:
rcu_read_unlock_special+0x175/0x260
__rcu_read_unlock+0x92/0xa0
rt_spin_unlock+0x9b/0xc0
__local_bh_enable+0x10d/0x170
__local_bh_enable_ip+0xfb/0x150
rcu_do_batch+0x595/0xc40
rcu_cpu_kthread+0x4e9/0x830
smpboot_thread_fn+0x24d/0x3b0
kthread+0x3bd/0x410
ret_from_fork+0x35/0x40
ret_from_fork_asm+0x1a/0x30
write to 0xffff96b95f42d8d8 of 1 bytes by task 88 on cpu 8:
rcu_preempt_deferred_qs_handler+0x1e/0x30
irq_work_single+0xaf/0x160
run_irq_workd+0x91/0xc0
smpboot_thread_fn+0x24d/0x3b0
kthread+0x3bd/0x410
ret_from_fork+0x35/0x40
ret_from_fork_asm+0x1a/0x30
no locks held by irq_work/8/88.
irq event stamp: 200272
hardirqs last enabled at (200272): [<ffffffffb0f56121>] finish_task_switch+0x131/0x320
hardirqs last disabled at (200271): [<ffffffffb25c7859>] __schedule+0x129/0xd70
softirqs last enabled at (0): [<ffffffffb0ee093f>] copy_process+0x4df/0x1cc0
softirqs last disabled at (0): [<0000000000000000>] 0x0
------------------------------------------------------------------------
The problem is that irq-work handlers run with interrupts enabled, which
means that rcu_preempt_deferred_qs_handler() could be interrupted,
and that interrupt handler might contain an RCU read-side critical
section, which might invoke rcu_read_unlock_special(). In the strict
KCSAN mode of operation used by RCU, this constitutes a data race on
the ->defer_qs_iw_pending field.
This commit therefore disables interrupts across the portion of the
rcu_preempt_deferred_qs_handler() that updates the ->defer_qs_iw_pending
field. This suffices because this handler is not a fast path.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4266e8fa56d3d982bf451d382a410b9db432015c ]
When the computer enters sleep status without a monitor
connected, the system switches the console to the virtual
terminal tty63(SUSPEND_CONSOLE).
If a monitor is subsequently connected before waking up,
the system skips the required VT restoration process
during wake-up, leaving the console on tty63 instead of
switching back to tty1.
To fix this issue, a global flag vt_switch_done is introduced
to record whether the system has successfully switched to
the suspend console via vt_move_to_console() during suspend.
If the switch was completed, vt_switch_done is set to 1.
Later during resume, this flag is checked to ensure that
the original console is restored properly by calling
vt_move_to_console(orig_fgconsole, 0).
This prevents scenarios where the resume logic skips console
restoration due to incorrect detection of the console state,
especially when a monitor is reconnected before waking up.
Signed-off-by: tuhaowen <tuhaowen@uniontech.com>
Link: https://patch.msgid.link/20250611032345.29962-1-tuhaowen@uniontech.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c0a23bbc98e93704a1f4fb5e7e7bb2d7c0fb6eb3 ]
The estimator kthreads' affinity are defined by sysctl overwritten
preferences and applied through a plain call to the scheduler's affinity
API.
However since the introduction of managed kthreads preferred affinity,
such a practice shortcuts the kthreads core code which eventually
overwrites the target to the default unbound affinity.
Fix this with using the appropriate kthread's API.
Fixes: d1a89197589c ("kthread: Default affine kthread to its preferred NUMA node")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit b024d7b56c77191cde544f838debb7f8451cd0d6 upstream.
The perf mmap code is careful about mmap()'ing the user page with the
ringbuffer and additionally the auxiliary buffer, when the event supports
it. Once the first mapping is established, subsequent mapping have to use
the same offset and the same size in both cases. The reference counting for
the ringbuffer and the auxiliary buffer depends on this being correct.
Though perf does not prevent that a related mapping is split via mmap(2),
munmap(2) or mremap(2). A split of a VMA results in perf_mmap_open() calls,
which take reference counts, but then the subsequent perf_mmap_close()
calls are not longer fulfilling the offset and size checks. This leads to
reference count leaks.
As perf already has the requirement for subsequent mappings to match the
initial mapping, the obvious consequence is that VMA splits, caused by
resizing of a mapping or partial unmapping, have to be prevented.
Implement the vm_operations_struct::may_split() callback and return
unconditionally -EINVAL.
That ensures that the mapping offsets and sizes cannot be changed after the
fact. Remapping to a different fixed address with the same size is still
possible as it takes the references for the new mapping and drops those of
the old mapping.
Fixes: 45bfb2e50471 ("perf/core: Add AUX area to ring buffer for raw data streams")
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-27504
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f74b9f4ba63ffdf597aaaa6cad7e284cb8e04820 upstream.
After successful allocation of a buffer or a successful attachment to an
existing buffer perf_mmap() tries to map the buffer read only into the page
table. If that fails, the already set up page table entries are zapped, but
the other perf specific side effects of that failure are not handled. The
calling code just cleans up the VMA and does not invoke perf_mmap_close().
This leaks reference counts, corrupts user->vm accounting and also results
in an unbalanced invocation of event::event_mapped().
Cure this by moving the event::event_mapped() invocation before the
map_range() call so that on map_range() failure perf_mmap_close() can be
invoked without causing an unbalanced event::event_unmapped() call.
perf_mmap_close() undoes the reference counts and eventually frees buffers.
Fixes: b709eb872e19 ("perf/core: map pages in advance")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 07091aade394f690e7b655578140ef84d0e8d7b0 upstream.
When perf_mmap() fails to allocate a buffer, it still invokes the
event_mapped() callback of the related event. On X86 this might increase
the perf_rdpmc_allowed reference counter. But nothing undoes this as
perf_mmap_close() is never called in this case, which causes another
reference count leak.
Return early on failure to prevent that.
Fixes: 1e0fb9ec679c ("perf/core: Add pmu callbacks to track event mapping and unmapping")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5468c0fbccbb9d156522c50832244a8b722374fb upstream.
Failure of the AUX buffer allocation leaks the reference count.
Set the reference count to 1 only when the allocation succeeds.
Fixes: 45bfb2e50471 ("perf/core: Add AUX area to ring buffer for raw data streams")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 54473e0ef849f44e5ee43e6d6746c27030c3825b upstream.
A recent overhaul sets the return value to 0 unconditionally after the
allocations, which causes reference count leaks and corrupts the user->vm
accounting.
Preserve the AUX buffer allocation failure return value, so that the
subsequent code works correctly.
Fixes: 0983593f32c4 ("perf/core: Lift event->mmap_mutex in perf_mmap()")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 99b773d720aeea1ef2170dce5fcfa80649e26b78 ]
With the seqcount moved out of the group into a global psi_seq,
re-initializing the seqcount on group creation is causing seqcount
corruption.
Fixes: 570c8efd5eb7 ("sched/psi: Optimize psi_group_change() cpu_clock() usage")
Reported-by: Chris Mason <clm@meta.com>
Suggested-by: Beata Michalska <beata.michalska@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f8cd9193b62e92ad25def5370ca8ea2bc7585381 ]
The type of u argument of atomic_long_inc_below() should be long to avoid
unwanted truncation to int.
The patch fixes the wrong argument type of an internal function to
prevent unwanted argument truncation. It fixes an internal locking
primitive; it should not have any direct effect on userspace.
Mark said
: AFAICT there's no problem in practice because atomic_long_inc_below()
: is only used by inc_ucount(), and it looks like the value is
: constrained between 0 and INT_MAX.
:
: In inc_ucount() the limit value is taken from
: user_namespace::ucount_max[], and AFAICT that's only written by
: sysctls, to the table setup by setup_userns_sysctls(), where
: UCOUNT_ENTRY() limits the value between 0 and INT_MAX.
:
: This is certainly a cleanup, but there might be no functional issue in
: practice as above.
Link: https://lkml.kernel.org/r/20250721174610.28361-1-ubizjak@gmail.com
Fixes: f9c82a4ea89c ("Increase size of ucounts to atomic_long_t")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Alexey Gladkov <legion@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: MengEn Sun <mengensun@tencent.com>
Cc: "Thomas Weißschuh" <linux@weissschuh.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit adc353c0bfb243ebfd29b6222fa3bf149169a6de ]
A CPU mask on the stack is broken for large values of CONFIG_NR_CPUS:
kernel/trace/preemptirq_delay_test.c: In function ‘preemptirq_delay_run’:
kernel/trace/preemptirq_delay_test.c:143:1: error: the frame size of 8512 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
Fall back to dynamic allocation here.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Song Chen <chensong_2000@189.cn>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250620111215.3365305-1-arnd@kernel.org
Fixes: 4b9091e1c194 ("kernel: trace: preemptirq_delay_test: add cpu affinity")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3aceaa539cfe3a2e62bd92e6697d9fae1c20c0be ]
Freeing of filters requires to wait for both an RCU grace period as well as
a RCU task trace wait period after they have been detached from their
lists. The trace task period can be quite large so the freeing of the
filters was moved to use the call_rcu*() routines. The problem with that is
that the callback functions of call_rcu*() is done from a soft irq and can
cause latencies if the callback takes a bit of time.
The filters are freed per event in a system and the syscalls system
contains an event per system call, which can be over 700 events. Freeing 700
filters in a bottom half is undesirable.
Instead, move the freeing to use queue_rcu_work() which is done in task
context.
Link: https://lore.kernel.org/all/9a2f0cd0-1561-4206-8966-f93ccd25927f@paulmck-laptop/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250609131732.04fd303b@gandalf.local.home
Fixes: a9d0aab5eb33 ("tracing: Fix regression of filter waiting a long time on RCU synchronization")
Suggested-by: "Paul E. McKenney" <paulmck@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 71203f68c7749609d7fc8ae6ad054bdedeb24f91 ]
There is a race condition/UAF in padata_reorder that goes back
to the initial commit. A reference count is taken at the start
of the process in padata_do_parallel, and released at the end in
padata_serial_worker.
This reference count is (and only is) required for padata_replace
to function correctly. If padata_replace is never called then
there is no issue.
In the function padata_reorder which serves as the core of padata,
as soon as padata is added to queue->serial.list, and the associated
spin lock released, that padata may be processed and the reference
count on pd would go away.
Fix this by getting the next padata before the squeue->serial lock
is released.
In order to make this possible, simplify padata_reorder by only
calling it once the next padata arrives.
Fixes: 16295bec6398 ("padata: Generic parallelization/serialization interface")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 79de661707a4a2dc695fd3e00529a14b4f5ec50d ]
RV monitors relying on the preemptirqs tracepoints are set as dependent
on PREEMPT_TRACER and IRQSOFF_TRACER. In fact, those configurations do
enable the tracepoints but are not the minimal configurations enabling
them, which are TRACE_PREEMPT_TOGGLE and TRACE_IRQFLAGS (not selectable
manually).
Set TRACE_PREEMPT_TOGGLE and TRACE_IRQFLAGS as dependencies for
monitors.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250728135022.255578-5-gmonaco@redhat.com
Fixes: fbe6c09b7eb4 ("rv: Add scpd, snep and sncid per-cpu monitors")
Acked-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2b03164eee20eac7ce0fe3aa4fbda7efc1e5427a ]
The usermode driver framework is not used anymore by the BPF
preload code.
Fixes: cb80ddc67152 ("bpf: Convert bpf_preload.ko to use light skeleton.")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/bpf/20250721-remove-usermode-driver-v1-1-0d0083334382@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9872916ad1a1a5e7d089e05166c85dbd65e5b0e8 ]
Newer compiler versions rightfully point out:
kernel/kcsan/kcsan_test.c:591:41: error: variable 'dummy' is
uninitialized when passed as a const pointer argument here
[-Werror,-Wuninitialized-const-pointer]
591 | KCSAN_EXPECT_READ_BARRIER(atomic_read(&dummy), false);
| ^~~~~
1 error generated.
Although this particular test does not care about the value stored in
the dummy atomic variable, let's silence the warning.
Link: https://lkml.kernel.org/r/CA+G9fYu8JY=k-r0hnBRSkQQrFJ1Bz+ShdXNwC1TNeMt0eXaxeA@mail.gmail.com
Fixes: 8bc32b348178 ("kcsan: test: Add test cases for memory barrier instrumentation")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reviewed-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 119a5d573622ae90ba730d18acfae9bb75d77b9a ]
When the ring buffer was first introduced, reading the non-consuming
"trace" file required disabling the writing of the ring buffer. To make
sure the writing was fully disabled before iterating the buffer with a
non-consuming read, it would set the disable flag of the buffer and then
call an RCU synchronization to make sure all the buffers were
synchronized.
The function ring_buffer_read_start() originally would initialize the
iterator and call an RCU synchronization, but this was for each individual
per CPU buffer where this would get called many times on a machine with
many CPUs before the trace file could be read. The commit 72c9ddfd4c5bf
("ring-buffer: Make non-consuming read less expensive with lots of cpus.")
separated ring_buffer_read_start into ring_buffer_read_prepare(),
ring_buffer_read_sync() and then ring_buffer_read_start() to allow each of
the per CPU buffers to be prepared, call the read_buffer_read_sync() once,
and then the ring_buffer_read_start() for each of the CPUs which made
things much faster.
The commit 1039221cc278 ("ring-buffer: Do not disable recording when there
is an iterator") removed the requirement of disabling the recording of the
ring buffer in order to iterate it, but it did not remove the
synchronization that was happening that was required to wait for all the
buffers to have no more writers. It's now OK for the buffers to have
writers and no synchronization is needed.
Remove the synchronization and put back the interface for the ring buffer
iterator back before commit 72c9ddfd4c5bf was applied.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250630180440.3eabb514@batman.local.home
Reported-by: David Howells <dhowells@redhat.com>
Fixes: 1039221cc278 ("ring-buffer: Do not disable recording when there is an iterator")
Tested-by: David Howells <dhowells@redhat.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 647fe16b46999258ce1aec41f4bdeabb4f0cc8e7 ]
As the trace event powernv_throttle is only used by the powernv code, move
it to a separate include file and have that code directly enable it.
Trace events can take up around 5K of memory when they are defined
regardless if they are used or not. It wastes memory to have them defined
in configurations where the tracepoint is not used.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/20250612145407.906308844@goodmis.org
Fixes: 0306e481d479a ("cpufreq: powernv/tracing: Add powernv_throttle tracepoint")
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 463d46044f04013306a4893242f65788b8a16b2e ]
We observed a regression in our customer’s environment after enabling
CONFIG_LAZY_RCU. In the Android Update Engine scenario, where ioctl() is
used heavily, we found that callbacks queued via call_rcu_hurry (such as
percpu_ref_switch_to_atomic_rcu) can sometimes be delayed by up to 5
seconds before execution. This occurs because the new grace period does
not start immediately after the previous one completes.
The root cause is that the wake_nocb_gp_defer() function now checks
"rdp->nocb_defer_wakeup" instead of "rdp_gp->nocb_defer_wakeup". On CPUs
that are not rcuog, "rdp->nocb_defer_wakeup" may always be
RCU_NOCB_WAKE_NOT. This can cause "rdp_gp->nocb_defer_wakeup" to be
downgraded and the "rdp_gp->nocb_timer" to be postponed by up to 10
seconds, delaying the execution of hurry RCU callbacks.
The trace log of one scenario we encountered is as follow:
// previous GP ends at this point
rcu_preempt [000] d..1. 137.240210: rcu_grace_period: rcu_preempt 8369 end
rcu_preempt [000] ..... 137.240212: rcu_grace_period: rcu_preempt 8372 reqwait
// call_rcu_hurry enqueues "percpu_ref_switch_to_atomic_rcu", the callback waited on by UpdateEngine
update_engine [002] d..1. 137.301593: __call_rcu_common: wyy: unlikely p_ref = 00000000********. lazy = 0
// FirstQ on cpu 2 rdp_gp->nocb_timer is set to fire after 1 jiffy (4ms)
// and the rdp_gp->nocb_defer_wakeup is set to RCU_NOCB_WAKE
update_engine [002] d..2. 137.301595: rcu_nocb_wake: rcu_preempt 2 FirstQ on cpu2 with rdp_gp (cpu0).
// FirstBQ event on cpu2 during the 1 jiffy, make the timer postpond 10 seconds later.
// also, the rdp_gp->nocb_defer_wakeup is overwrite to RCU_NOCB_WAKE_LAZY
update_engine [002] d..1. 137.301601: rcu_nocb_wake: rcu_preempt 2 WakeEmptyIsDeferred
...
...
...
// before the 10 seconds timeout, cpu0 received another call_rcu_hurry
// reset the timer to jiffies+1 and set the waketype = RCU_NOCB_WAKE.
kworker/u32:0 [000] d..2. 142.557564: rcu_nocb_wake: rcu_preempt 0 FirstQ
kworker/u32:0 [000] d..1. 142.557576: rcu_nocb_wake: rcu_preempt 0 WakeEmptyIsDeferred
kworker/u32:0 [000] d..1. 142.558296: rcu_nocb_wake: rcu_preempt 0 WakeNot
kworker/u32:0 [000] d..1. 142.558562: rcu_nocb_wake: rcu_preempt 0 WakeNot
// idle(do_nocb_deferred_wakeup) wake rcuog due to waketype == RCU_NOCB_WAKE
<idle> [000] d..1. 142.558786: rcu_nocb_wake: rcu_preempt 0 DoWake
<idle> [000] dN.1. 142.558839: rcu_nocb_wake: rcu_preempt 0 DeferredWake
rcuog/0 [000] ..... 142.558871: rcu_nocb_wake: rcu_preempt 0 EndSleep
rcuog/0 [000] ..... 142.558877: rcu_nocb_wake: rcu_preempt 0 Check
// finally rcuog request a new GP at this point (5 seconds after the FirstQ event)
rcuog/0 [000] d..2. 142.558886: rcu_grace_period: rcu_preempt 8372 newreq
rcu_preempt [001] d..1. 142.559458: rcu_grace_period: rcu_preempt 8373 start
...
rcu_preempt [000] d..1. 142.564258: rcu_grace_period: rcu_preempt 8373 end
rcuop/2 [000] D..1. 142.566337: rcu_batch_start: rcu_preempt CBs=219 bl=10
// the hurry CB is invoked at this point
rcuop/2 [000] b.... 142.566352: blk_queue_usage_counter_release: wyy: wakeup. p_ref = 00000000********.
This patch changes the condition to check "rdp_gp->nocb_defer_wakeup" in
the lazy path. This prevents an already scheduled "rdp_gp->nocb_timer"
from being postponed and avoids overwriting "rdp_gp->nocb_defer_wakeup"
when it is not RCU_NOCB_WAKE_NOT.
Fixes: 3cb278e73be5 ("rcu: Make call_rcu() lazy to save power")
Co-developed-by: Cheng-jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Cheng-jui Wang <cheng-jui.wang@mediatek.com>
Co-developed-by: Lorry.Luo@mediatek.com
Signed-off-by: Lorry.Luo@mediatek.com
Tested-by: weiyangyang@vivo.com
Signed-off-by: weiyangyang@vivo.com
Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fcc9276c4d331cd1fe9319d793e80b02e09727f5 ]
dl_clear_root_domain() doesn't take into account the fact that per-rq
extra_bw variables retain values computed before root domain changes,
resulting in broken accounting.
Fix it by resetting extra_bw to max_bw before restoring back dl-servers
contributions.
Fixes: 2ff899e351643 ("sched/deadline: Rebuild root domain accounting after every update")
Reported-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk> # nuc & rock5b
Link: https://lore.kernel.org/r/20250627115118.438797-3-juri.lelli@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 570c8efd5eb79c3725ba439ce105ed1bedc5acd9 ]
Dietmar reported that commit 3840cbe24cf0 ("sched: psi: fix bogus
pressure spikes from aggregation race") caused a regression for him on
a high context switch rate benchmark (schbench) due to the now
repeating cpu_clock() calls.
In particular the problem is that get_recent_times() will extrapolate
the current state to 'now'. But if an update uses a timestamp from
before the start of the update, it is possible to get two reads
with inconsistent results. It is effectively back-dating an update.
(note that this all hard-relies on the clock being synchronized across
CPUs -- if this is not the case, all bets are off).
Combine this problem with the fact that there are per-group-per-cpu
seqcounts, the commit in question pushed the clock read into the group
iteration, causing tree-depth cpu_clock() calls. On architectures
where cpu_clock() has appreciable overhead, this hurts.
Instead move to a per-cpu seqcount, which allows us to have a single
clock read for all group updates, increasing internal consistency and
lowering update overhead. This comes at the cost of a longer update
side (proportional to the tree depth) which can cause the read side to
retry more often.
Fixes: 3840cbe24cf0 ("sched: psi: fix bogus pressure spikes from aggregation race")
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>,
Link: https://lkml.kernel.org/20250522084844.GC31726@noisy.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 005b6187705bc9723518ce19c5cb911fc1f7ef07 ]
The nreaders and loops variables are exposed as module parameters, which,
in certain combinations, can lead to multi |
