| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit bd74e238ae6944b462f57ce8752440a011ba4530 ]
Andrii spotted that process_dynptr_func's rejection of incorrect
argument register type will print an error string where argument numbers
are not zero-indexed, unlike elsewhere in the verifier. Fix this by
subtracting 1 from regno. The same scenario exists for iterator
messages. Fix selftest error strings that match on the exact argument
number while we're at it to ensure clean bisection.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241203002235.3776418-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
update
[ Upstream commit d685d55dfc86b1a4bdcec77c3c1f8a83f181264e ]
Make sure the trace_kprobe's module notifer callback function is called
after jump_label's callback is called. Since the trace_kprobe's callback
eventually checks jump_label address during registering new kprobe on
the loading module, jump_label must be updated before this registration
happens.
Link: https://lore.kernel.org/all/173387585556.995044.3157941002975446119.stgit@devnote2/
Fixes: 614243181050 ("tracing/kprobes: Support module init function probing")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8ac662f5da19f5873fdd94c48a5cdb45b2e1b58f ]
If dup_mmap() encounters an issue, currently uprobe is able to access the
relevant mm via the reverse mapping (in build_map_info()), and if we are
very unlucky with a race window, observe invalid XA_ZERO_ENTRY state which
we establish as part of the fork error path.
This occurs because uprobe_write_opcode() invokes anon_vma_prepare() which
in turn invokes find_mergeable_anon_vma() that uses a VMA iterator,
invoking vma_iter_load() which uses the advanced maple tree API and thus
is able to observe XA_ZERO_ENTRY entries added to dup_mmap() in commit
d24062914837 ("fork: use __mt_dup() to duplicate maple tree in
dup_mmap()").
This change was made on the assumption that only process tear-down code
would actually observe (and make use of) these values. However this very
unlikely but still possible edge case with uprobes exists and
unfortunately does make these observable.
The uprobe operation prevents races against the dup_mmap() operation via
the dup_mmap_sem semaphore, which is acquired via uprobe_start_dup_mmap()
and dropped via uprobe_end_dup_mmap(), and held across
register_for_each_vma() prior to invoking build_map_info() which does the
reverse mapping lookup.
Currently these are acquired and dropped within dup_mmap(), which exposes
the race window prior to error handling in the invoking dup_mm() which
tears down the mm.
We can avoid all this by just moving the invocation of
uprobe_start_dup_mmap() and uprobe_end_dup_mmap() up a level to dup_mm()
and only release this lock once the dup_mmap() operation succeeds or clean
up is done.
This means that the uprobe code can never observe an incompletely
constructed mm and resolves the issue in this case.
Link: https://lkml.kernel.org/r/20241210172412.52995-1-lorenzo.stoakes@oracle.com
Fixes: d24062914837 ("fork: use __mt_dup() to duplicate maple tree in dup_mmap()")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: syzbot+2d788f4f7cb660dac4b7@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6756d273.050a0220.2477f.003d.GAE@google.com/
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 23579010cf0a12476e96a5f1acdf78a9c5843657 ]
On x86-64 calling bpf_get_smp_processor_id() in a kernel with CONFIG_SMP
disabled can trigger the following bug, as pcpu_hot is unavailable:
[ 8.471774] BUG: unable to handle page fault for address: 00000000936a290c
[ 8.471849] #PF: supervisor read access in kernel mode
[ 8.471881] #PF: error_code(0x0000) - not-present page
Fix by inlining a return 0 in the !CONFIG_SMP case.
Fixes: 1ae6921009e5 ("bpf: inline bpf_get_smp_processor_id() helper")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241217195813.622568-1-arighi@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit afd2627f727b89496d79a6b934a025fc916d4ded upstream.
The TP_printk() portion of a trace event is executed at the time a event
is read from the trace. This can happen seconds, minutes, hours, days,
months, years possibly later since the event was recorded. If the print
format contains a dereference to a string via "%s", and that string was
allocated, there's a chance that string could be freed before it is read
by the trace file.
To protect against such bugs, there are two functions that verify the
event. The first one is test_event_printk(), which is called when the
event is created. It reads the TP_printk() format as well as its arguments
to make sure nothing may be dereferencing a pointer that was not copied
into the ring buffer along with the event. If it is, it will trigger a
WARN_ON().
For strings that use "%s", it is not so easy. The string may not reside in
the ring buffer but may still be valid. Strings that are static and part
of the kernel proper which will not be freed for the life of the running
system, are safe to dereference. But to know if it is a pointer to a
static string or to something on the heap can not be determined until the
event is triggered.
This brings us to the second function that tests for the bad dereferencing
of strings, trace_check_vprintf(). It would walk through the printf format
looking for "%s", and when it finds it, it would validate that the pointer
is safe to read. If not, it would produces a WARN_ON() as well and write
into the ring buffer "[UNSAFE-MEMORY]".
The problem with this is how it used va_list to have vsnprintf() handle
all the cases that it didn't need to check. Instead of re-implementing
vsnprintf(), it would make a copy of the format up to the %s part, and
call vsnprintf() with the current va_list ap variable, where the ap would
then be ready to point at the string in question.
For architectures that passed va_list by reference this was possible. For
architectures that passed it by copy it was not. A test_can_verify()
function was used to differentiate between the two, and if it wasn't
possible, it would disable it.
Even for architectures where this was feasible, it was a stretch to rely
on such a method that is undocumented, and could cause issues later on
with new optimizations of the compiler.
Instead, the first function test_event_printk() was updated to look at
"%s" as well. If the "%s" argument is a pointer outside the event in the
ring buffer, it would find the field type of the event that is the problem
and mark the structure with a new flag called "needs_test". The event
itself will be marked by TRACE_EVENT_FL_TEST_STR to let it be known that
this event has a field that needs to be verified before the event can be
printed using the printf format.
When the event fields are created from the field type structure, the
fields would copy the field type's "needs_test" value.
Finally, before being printed, a new function ignore_event() is called
which will check if the event has the TEST_STR flag set (if not, it
returns false). If the flag is set, it then iterates through the events
fields looking for the ones that have the "needs_test" flag set.
Then it uses the offset field from the field structure to find the pointer
in the ring buffer event. It runs the tests to make sure that pointer is
safe to print and if not, it triggers the WARN_ON() and also adds to the
trace output that the event in question has an unsafe memory access.
The ignore_event() makes the trace_check_vprintf() obsolete so it is
removed.
Link: https://lore.kernel.org/all/CAHk-=wh3uOnqnZPpR0PeLZZtyWbZLboZ7cHLCKRWsocvs9Y7hQ@mail.gmail.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20241217024720.848621576@goodmis.org
Fixes: 5013f454a352c ("tracing: Add check of trace event print fmts for dereferencing pointers")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 65a25d9f7ac02e0cf361356e834d1c71d36acca9 upstream.
The test_event_printk() code makes sure that when a trace event is
registered, any dereferenced pointers in from the event's TP_printk() are
pointing to content in the ring buffer. But currently it does not handle
"%s", as there's cases where the string pointer saved in the ring buffer
points to a static string in the kernel that will never be freed. As that
is a valid case, the pointer needs to be checked at runtime.
Currently the runtime check is done via trace_check_vprintf(), but to not
have to replicate everything in vsnprintf() it does some logic with the
va_list that may not be reliable across architectures. In order to get rid
of that logic, more work in the test_event_printk() needs to be done. Some
of the strings can be validated at this time when it is obvious the string
is valid because the string will be saved in the ring buffer content.
Do all the validation of strings in the ring buffer at boot in
test_event_printk(), and make sure that the field of the strings that
point into the kernel are accessible. This will allow adding checks at
runtime that will validate the fields themselves and not rely on paring
the TP_printk() format at runtime.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20241217024720.685917008@goodmis.org
Fixes: 5013f454a352c ("tracing: Add check of trace event print fmts for dereferencing pointers")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 917110481f6bc1c96b1e54b62bb114137fbc6d17 upstream.
The process_pointer() helper function looks to see if various trace event
macros are used. These macros are for storing data in the event. This
makes it safe to dereference as the dereference will then point into the
event on the ring buffer where the content of the data stays with the
event itself.
A few helper functions were missing. Those were:
__get_rel_dynamic_array()
__get_dynamic_array_len()
__get_rel_dynamic_array_len()
__get_rel_sockaddr()
Also add a helper function find_print_string() to not need to use a middle
man variable to test if the string exists.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20241217024720.521836792@goodmis.org
Fixes: 5013f454a352c ("tracing: Add check of trace event print fmts for dereferencing pointers")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a6629626c584200daf495cc9a740048b455addcd upstream.
The test_event_printk() analyzes print formats of trace events looking for
cases where it may dereference a pointer that is not in the ring buffer
which can possibly be a bug when the trace event is read from the ring
buffer and the content of that pointer no longer exists.
The function needs to accurately go from one print format argument to the
next. It handles quotes and parenthesis that may be included in an
argument. When it finds the start of the next argument, it uses a simple
"c = strstr(fmt + i, ',')" to find the end of that argument!
In order to include "%s" dereferencing, it needs to process the entire
content of the print format argument and not just the content of the first
',' it finds. As there may be content like:
({ const char *saved_ptr = trace_seq_buffer_ptr(p); static const char
*access_str[] = { "---", "--x", "w--", "w-x", "-u-", "-ux", "wu-", "wux"
}; union kvm_mmu_page_role role; role.word = REC->role;
trace_seq_printf(p, "sp gen %u gfn %llx l%u %u-byte q%u%s %s%s" " %snxe
%sad root %u %s%c", REC->mmu_valid_gen, REC->gfn, role.level,
role.has_4_byte_gpte ? 4 : 8, role.quadrant, role.direct ? " direct" : "",
access_str[role.access], role.invalid ? " invalid" : "", role.efer_nx ? ""
: "!", role.ad_disabled ? "!" : "", REC->root_count, REC->unsync ?
"unsync" : "sync", 0); saved_ptr; })
Which is an example of a full argument of an existing event. As the code
already handles finding the next print format argument, process the
argument at the end of it and not the start of it. This way it has both
the start of the argument as well as the end of it.
Add a helper function "process_pointer()" that will do the processing during
the loop as well as at the end. It also makes the code cleaner and easier
to read.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20241217024720.362271189@goodmis.org
Fixes: 5013f454a352c ("tracing: Add check of trace event print fmts for dereferencing pointers")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cc252bb592638e0f7aea40d580186c36d89526b8 upstream.
A bug was discovered where the idle shadow stacks were not initialized
for offline CPUs when starting function graph tracer, and when they came
online they were not traced due to the missing shadow stack. To fix
this, the idle task shadow stack initialization was moved to using the
CPU hotplug callbacks. But it removed the initialization when the
function graph was enabled. The problem here is that the hotplug
callbacks are called when the CPUs come online, but the idle shadow
stack initialization only happens if function graph is currently
active. This caused the online CPUs to not get their shadow stack
initialized.
The idle shadow stack initialization still needs to be done when the
function graph is registered, as they will not be allocated if function
graph is not registered.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241211135335.094ba282@batman.local.home
Fixes: 2c02f7375e65 ("fgraph: Use CPU hotplug mechanism to initialize idle shadow stacks")
Reported-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Closes: https://lore.kernel.org/all/CACRpkdaTBrHwRbbrphVy-=SeDz6MSsXhTKypOtLrTQ+DgGAOcQ@mail.gmail.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c58a812c8e49ad688f94f4b050ad5c5b388fc5d2 upstream.
An overflow occurred when performing the following calculation:
nr_pages = ((nr_subbufs + 1) << subbuf_order) - pgoff;
Add a check before the calculation to avoid this problem.
syzbot reported this as a slab-out-of-bounds in __rb_map_vma:
BUG: KASAN: slab-out-of-bounds in __rb_map_vma+0x9ab/0xae0 kernel/trace/ring_buffer.c:7058
Read of size 8 at addr ffff8880767dd2b8 by task syz-executor187/5836
CPU: 0 UID: 0 PID: 5836 Comm: syz-executor187 Not tainted 6.13.0-rc2-syzkaller-00159-gf932fb9b4074 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xc3/0x620 mm/kasan/report.c:489
kasan_report+0xd9/0x110 mm/kasan/report.c:602
__rb_map_vma+0x9ab/0xae0 kernel/trace/ring_buffer.c:7058
ring_buffer_map+0x56e/0x9b0 kernel/trace/ring_buffer.c:7138
tracing_buffers_mmap+0xa6/0x120 kernel/trace/trace.c:8482
call_mmap include/linux/fs.h:2183 [inline]
mmap_file mm/internal.h:124 [inline]
__mmap_new_file_vma mm/vma.c:2291 [inline]
__mmap_new_vma mm/vma.c:2355 [inline]
__mmap_region+0x1786/0x2670 mm/vma.c:2456
mmap_region+0x127/0x320 mm/mmap.c:1348
do_mmap+0xc00/0xfc0 mm/mmap.c:496
vm_mmap_pgoff+0x1ba/0x360 mm/util.c:580
ksys_mmap_pgoff+0x32c/0x5c0 mm/mmap.c:542
__do_sys_mmap arch/x86/kernel/sys_x86_64.c:89 [inline]
__se_sys_mmap arch/x86/kernel/sys_x86_64.c:82 [inline]
__x64_sys_mmap+0x125/0x190 arch/x86/kernel/sys_x86_64.c:82
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The reproducer for this bug is:
------------------------8<-------------------------
#include <fcntl.h>
#include <stdlib.h>
#include <unistd.h>
#include <asm/types.h>
#include <sys/mman.h>
int main(int argc, char **argv)
{
int page_size = getpagesize();
int fd;
void *meta;
system("echo 1 > /sys/kernel/tracing/buffer_size_kb");
fd = open("/sys/kernel/tracing/per_cpu/cpu0/trace_pipe_raw", O_RDONLY);
meta = mmap(NULL, page_size, PROT_READ, MAP_SHARED, fd, page_size * 5);
}
------------------------>8-------------------------
Cc: stable@vger.kernel.org
Fixes: 117c39200d9d7 ("ring-buffer: Introducing ring-buffer mapping functions")
Link: https://lore.kernel.org/tencent_06924B6674ED771167C23CC336C097223609@qq.com
Reported-by: syzbot+345e4443a21200874b18@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=345e4443a21200874b18
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8cd63406d08110c8098e1efda8aef7ddab4db348 upstream.
The TP_printk() of a TRACE_EVENT() is a generic printf format that any
developer can create for their event. It may include pointers to strings
and such. A boot mapped buffer may contain data from a previous kernel
where the strings addresses are different.
One solution is to copy the event content and update the pointers by the
recorded delta, but a simpler solution (for now) is to just use the
print_fields() function to print these events. The print_fields() function
just iterates the fields and prints them according to what type they are,
and ignores the TP_printk() format from the event itself.
To understand the difference, when printing via TP_printk() the output
looks like this:
4582.696626: kmem_cache_alloc: call_site=getname_flags+0x47/0x1f0 ptr=00000000e70e10e0 bytes_req=4096 bytes_alloc=4096 gfp_flags=GFP_KERNEL node=-1 accounted=false
4582.696629: kmem_cache_alloc: call_site=alloc_empty_file+0x6b/0x110 ptr=0000000095808002 bytes_req=360 bytes_alloc=384 gfp_flags=GFP_KERNEL node=-1 accounted=false
4582.696630: kmem_cache_alloc: call_site=security_file_alloc+0x24/0x100 ptr=00000000576339c3 bytes_req=16 bytes_alloc=16 gfp_flags=GFP_KERNEL|__GFP_ZERO node=-1 accounted=false
4582.696653: kmem_cache_free: call_site=do_sys_openat2+0xa7/0xd0 ptr=00000000e70e10e0 name=names_cache
But when printing via print_fields() (echo 1 > /sys/kernel/tracing/options/fields)
the same event output looks like this:
4582.696626: kmem_cache_alloc: call_site=0xffffffff92d10d97 (-1831793257) ptr=0xffff9e0e8571e000 (-107689771147264) bytes_req=0x1000 (4096) bytes_alloc=0x1000 (4096) gfp_flags=0xcc0 (3264) node=0xffffffff (-1) accounted=(0)
4582.696629: kmem_cache_alloc: call_site=0xffffffff92d0250b (-1831852789) ptr=0xffff9e0e8577f800 (-107689770747904) bytes_req=0x168 (360) bytes_alloc=0x180 (384) gfp_flags=0xcc0 (3264) node=0xffffffff (-1) accounted=(0)
4582.696630: kmem_cache_alloc: call_site=0xffffffff92efca74 (-1829778828) ptr=0xffff9e0e8d35d3b0 (-107689640864848) bytes_req=0x10 (16) bytes_alloc=0x10 (16) gfp_flags=0xdc0 (3520) node=0xffffffff (-1) accounted=(0)
4582.696653: kmem_cache_free: call_site=0xffffffff92cfbea7 (-1831879001) ptr=0xffff9e0e8571e000 (-107689771147264) name=names_cache
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20241218141507.28389a1d@gandalf.local.home
Fixes: 07714b4bb3f98 ("tracing: Handle old buffer mappings for event strings and functions")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c7f7e9c73178e0e342486fd31e7f363ef60e3f83 ]
dlserver time is accounted when:
- dlserver is active and the dlserver proxies the cfs task.
- dlserver is active but deferred and cfs task runs after being picked
through the normal fair class pick.
dl_server_update is called in two places to make sure that both the
above times are accounted for. But it doesn't check if dlserver is
active or not. Now that we have this dl_server_active flag, we can
consolidate dl_server_update into one place and all we need to check is
whether dlserver is active or not. When dlserver is active there is only
two possible conditions:
- dlserver is deferred.
- cfs task is running on behalf of dlserver.
Fixes: a110a81c52a9 ("sched/deadline: Deferrable dl server")
Signed-off-by: "Vineeth Pillai (Google)" <vineeth@bitbyteword.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk> # ROCK 5B
Link: https://lore.kernel.org/r/20241213032244.877029-2-vineeth@bitbyteword.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b53127db1dbf7f1047cf35c10922d801dcd40324 ]
dlserver can get dequeued during a dlserver pick_task due to the delayed
deueue feature and this can lead to issues with dlserver logic as it
still thinks that dlserver is on the runqueue. The dlserver throttling
and replenish logic gets confused and can lead to double enqueue of
dlserver.
Double enqueue of dlserver could happend due to couple of reasons:
Case 1
------
Delayed dequeue feature[1] can cause dlserver being stopped during a
pick initiated by dlserver:
__pick_next_task
pick_task_dl -> server_pick_task
pick_task_fair
pick_next_entity (if (sched_delayed))
dequeue_entities
dl_server_stop
server_pick_task goes ahead with update_curr_dl_se without knowing that
dlserver is dequeued and this confuses the logic and may lead to
unintended enqueue while the server is stopped.
Case 2
------
A race condition between a task dequeue on one cpu and same task's enqueue
on this cpu by a remote cpu while the lock is released causing dlserver
double enqueue.
One cpu would be in the schedule() and releasing RQ-lock:
current->state = TASK_INTERRUPTIBLE();
schedule();
deactivate_task()
dl_stop_server();
pick_next_task()
pick_next_task_fair()
sched_balance_newidle()
rq_unlock(this_rq)
at which point another CPU can take our RQ-lock and do:
try_to_wake_up()
ttwu_queue()
rq_lock()
...
activate_task()
dl_server_start() --> first enqueue
wakeup_preempt() := check_preempt_wakeup_fair()
update_curr()
update_curr_task()
if (current->dl_server)
dl_server_update()
enqueue_dl_entity() --> second enqueue
This bug was not apparent as the enqueue in dl_server_start doesn't
usually happen because of the defer logic. But as a side effect of the
first case(dequeue during dlserver pick), dl_throttled and dl_yield will
be set and this causes the time accounting of dlserver to messup and
then leading to a enqueue in dl_server_start.
Have an explicit flag representing the status of dlserver to avoid the
confusion. This is set in dl_server_start and reset in dlserver_stop.
Fixes: 63ba8422f876 ("sched/deadline: Introduce deadline servers")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: "Vineeth Pillai (Google)" <vineeth@bitbyteword.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk> # ROCK 5B
Link: https://lkml.kernel.org/r/20241213032244.877029-1-vineeth@bitbyteword.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 76f2f783294d7d55c2564e2dfb0a7279ba0bc264 ]
Vincent and Dietmar noted that while
commit fc1892becd56 ("sched/eevdf: Fixup PELT vs DELAYED_DEQUEUE") fixes
the entity runnable stats, it does not adjust the cfs_rq runnable stats,
which are based off of h_nr_running.
Track h_nr_delayed such that we can discount those and adjust the
signal.
Fixes: fc1892becd56 ("sched/eevdf: Fixup PELT vs DELAYED_DEQUEUE")
Closes: https://lore.kernel.org/lkml/a9a45193-d0c6-4ba2-a822-464ad30b550e@arm.com/
Closes: https://lore.kernel.org/lkml/CAKfTPtCNUvWE_GX5LyvTF-WdxUT=ZgvZZv-4t=eWntg5uOFqiQ@mail.gmail.com/
[ Fixes checkpatch warnings and rebased ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reported-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20241202174606.4074512-3-vincent.guittot@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c1f43c342e1f2e32f0620bf2e972e2a9ea0a1e60 ]
We can't stop the tick of a rq if there are at least 2 tasks enqueued in
the whole hierarchy and not only at the root cfs rq.
rq->cfs.nr_running tracks the number of sched_entity at one level
whereas rq->cfs.h_nr_running tracks all queued tasks in the
hierarchy.
Fixes: 11cc374f4643b ("sched_ext: Simplify scx_can_stop_tick() invocation in sched_can_stop_tick()")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20241202174606.4074512-2-vincent.guittot@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 493afbd187c4c9cc1642792c0d9ba400c3d6d90d ]
Adam reports that enabling NEXT_BUDDY insta triggers a WARN in
pick_next_entity().
Moving clear_buddies() up before the delayed dequeue bits ensures
no ->next buddy becomes delayed. Further ensure no new ->next buddy
ever starts as delayed.
Fixes: 152e11f6df29 ("sched/fair: Implement delayed dequeue")
Reported-by: Adam Li <adamli@os.amperecomputing.com>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Adam Li <adamli@os.amperecomputing.com>
Link: https://lkml.kernel.org/r/670a0d54-e398-4b1f-8a6e-90784e2fdf89@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 0ef8047b737d7480a5d4c46d956e97c190f13050 upstream.
Add static_call_update_early() for updating static-call targets in
very early boot.
This will be needed for support of Xen guest type specific hypercall
functions.
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Co-developed-by: Peter Zijlstra <peterz@infradead.org>
Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 838a10bd2ebfe11a60dd67687533a7cfc220cc86 upstream.
Arguments to a raw tracepoint are tagged as trusted, which carries the
semantics that the pointer will be non-NULL. However, in certain cases,
a raw tracepoint argument may end up being NULL. More context about this
issue is available in [0].
Thus, there is a discrepancy between the reality, that raw_tp arguments can
actually be NULL, and the verifier's knowledge, that they are never NULL,
causing explicit NULL check branch to be dead code eliminated.
A previous attempt [1], i.e. the second fixed commit, was made to
simulate symbolic execution as if in most accesses, the argument is a
non-NULL raw_tp, except for conditional jumps. This tried to suppress
branch prediction while preserving compatibility, but surfaced issues
with production programs that were difficult to solve without increasing
verifier complexity. A more complete discussion of issues and fixes is
available at [2].
Fix this by maintaining an explicit list of tracepoints where the
arguments are known to be NULL, and mark the positional arguments as
PTR_MAYBE_NULL. Additionally, capture the tracepoints where arguments
are known to be ERR_PTR, and mark these arguments as scalar values to
prevent potential dereference.
Each hex digit is used to encode NULL-ness (0x1) or ERR_PTR-ness (0x2),
shifted by the zero-indexed argument number x 4. This can be represented
as follows:
1st arg: 0x1
2nd arg: 0x10
3rd arg: 0x100
... and so on (likewise for ERR_PTR case).
In the future, an automated pass will be used to produce such a list, or
insert __nullable annotations automatically for tracepoints. Each
compilation unit will be analyzed and results will be collated to find
whether a tracepoint pointer is definitely not null, maybe null, or an
unknown state where verifier conservatively marks it PTR_MAYBE_NULL.
A proof of concept of this tool from Eduard is available at [3].
Note that in case we don't find a specification in the raw_tp_null_args
array and the tracepoint belongs to a kernel module, we will
conservatively mark the arguments as PTR_MAYBE_NULL. This is because
unlike for in-tree modules, out-of-tree module tracepoints may pass NULL
freely to the tracepoint. We don't protect against such tracepoints
passing ERR_PTR (which is uncommon anyway), lest we mark all such
arguments as SCALAR_VALUE.
While we are it, let's adjust the test raw_tp_null to not perform
dereference of the skb->mark, as that won't be allowed anymore, and make
it more robust by using inline assembly to test the dead code
elimination behavior, which should still stay the same.
[0]: https://lore.kernel.org/bpf/ZrCZS6nisraEqehw@jlelli-thinkpadt14gen4.remote.csb
[1]: https://lore.kernel.org/all/20241104171959.2938862-1-memxor@gmail.com
[2]: https://lore.kernel.org/bpf/20241206161053.809580-1-memxor@gmail.com
[3]: https://github.com/eddyz87/llvm-project/tree/nullness-for-tracepoint-params
Reported-by: Juri Lelli <juri.lelli@redhat.com> # original bug
Reported-by: Manu Bretelle <chantra@meta.com> # bugs in masking fix
Fixes: 3f00c5239344 ("bpf: Allow trusted pointers to be passed to KF_TRUSTED_ARGS kfuncs")
Fixes: cb4158ce8ec8 ("bpf: Mark raw_tp arguments with PTR_MAYBE_NULL")
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Co-developed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241213221929.3495062-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 978c4486cca5c7b9253d3ab98a88c8e769cb9bbd upstream.
Syzbot reported [1] crash that happens for following tracing scenario:
- create tracepoint perf event with attr.inherit=1, attach it to the
process and set bpf program to it
- attached process forks -> chid creates inherited event
the new child event shares the parent's bpf program and tp_event
(hence prog_array) which is global for tracepoint
- exit both process and its child -> release both events
- first perf_event_detach_bpf_prog call will release tp_event->prog_array
and second perf_event_detach_bpf_prog will crash, because
tp_event->prog_array is NULL
The fix makes sure the perf_event_detach_bpf_prog checks prog_array
is valid before it tries to remove the bpf program from it.
[1] https://lore.kernel.org/bpf/Z1MR6dCIKajNS6nU@krava/T/#m91dbf0688221ec7a7fc95e896a7ef9ff93b0b8ad
Fixes: 0ee288e69d03 ("bpf,perf: Fix perf_event_detach_bpf_prog error handling")
Reported-by: syzbot+2e0d2840414ce817aaac@syzkaller.appspotmail.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241208142507.1207698-1-jolsa@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7d0d673627e20cfa3b21a829a896ce03b58a4f1c upstream.
Currently, the pointer stored in call->prog_array is loaded in
__uprobe_perf_func(), with no RCU annotation and no immediately visible
RCU protection, so it looks as if the loaded pointer can immediately be
dangling.
Later, bpf_prog_run_array_uprobe() starts a RCU-trace read-side critical
section, but this is too late. It then uses rcu_dereference_check(), but
this use of rcu_dereference_check() does not actually dereference anything.
Fix it by aligning the semantics to bpf_prog_run_array(): Let the caller
provide rcu_read_lock_trace() protection and then load call->prog_array
with rcu_dereference_check().
This issue seems to be theoretical: I don't know of any way to reach this
code without having handle_swbp() further up the stack, which is already
holding a rcu_read_lock_trace() lock, so where we take
rcu_read_lock_trace() in __uprobe_perf_func()/bpf_prog_run_array_uprobe()
doesn't actually have any effect.
Fixes: 8c7dcb84e3b7 ("bpf: implement sleepable uprobes by chaining gps")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241210-bpf-fix-uprobe-uaf-v4-1-5fc8959b2b74@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 659b9ba7cb2d7adb64618b87ddfaa528a143766e upstream.
Robert Morris reported the following program type which passes the
verifier in [0]:
SEC("struct_ops/bpf_cubic_init")
void BPF_PROG(bpf_cubic_init, struct sock *sk)
{
asm volatile("r2 = *(u16*)(r1 + 0)"); // verifier should demand u64
asm volatile("*(u32 *)(r2 +1504) = 0"); // 1280 in some configs
}
The second line may or may not work, but the first instruction shouldn't
pass, as it's a narrow load into the context structure of the struct ops
callback. The code falls back to btf_ctx_access to ensure correctness
and obtaining the types of pointers. Ensure that the size of the access
is correctly checked to be 8 bytes, otherwise the verifier thinks the
narrow load obtained a trusted BTF pointer and will permit loads/stores
as it sees fit.
Perform the check on size after we've verified that the load is for a
pointer field, as for scalar values narrow loads are fine. Access to
structs passed as arguments to a BPF program are also treated as
scalars, therefore no adjustment is needed in their case.
Existing verifier selftests are broken by this change, but because they
were incorrect. Verifier tests for d_path were performing narrow load
into context to obtain path pointer, had this program actually run it
would cause a crash. The same holds for verifier_btf_ctx_access tests.
[0]: https://lore.kernel.org/bpf/51338.1732985814@localhost
Fixes: 9e15db66136a ("bpf: Implement accurate raw_tp context access via BTF")
Reported-by: Robert Morris <rtm@mit.edu>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241212092050.3204165-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c00d738e1673ab801e1577e4e3c780ccf88b1a5b upstream.
This patch reverts commit
cb4158ce8ec8 ("bpf: Mark raw_tp arguments with PTR_MAYBE_NULL"). The
patch was well-intended and meant to be as a stop-gap fixing branch
prediction when the pointer may actually be NULL at runtime. Eventually,
it was supposed to be replaced by an automated script or compiler pass
detecting possibly NULL arguments and marking them accordingly.
However, it caused two main issues observed for production programs and
failed to preserve backwards compatibility. First, programs relied on
the verifier not exploring == NULL branch when pointer is not NULL, thus
they started failing with a 'dereference of scalar' error. Next,
allowing raw_tp arguments to be modified surfaced the warning in the
verifier that warns against reg->off when PTR_MAYBE_NULL is set.
More information, context, and discusson on both problems is available
in [0]. Overall, this approach had several shortcomings, and the fixes
would further complicate the verifier's logic, and the entire masking
scheme would have to be removed eventually anyway.
Hence, revert the patch in preparation of a better fix avoiding these
issues to replace this commit.
[0]: https://lore.kernel.org/bpf/20241206161053.809580-1-memxor@gmail.com
Reported-by: Manu Bretelle <chantra@meta.com>
Fixes: cb4158ce8ec8 ("bpf: Mark raw_tp arguments with PTR_MAYBE_NULL")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241213221929.3495062-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 22368fe1f9bbf39db2b5b52859589883273e80ce upstream.
The condition in replenish_dl_new_period() that checks if a reservation
(dl_server) is deferred and is not handling a starvation case is
obviously wrong.
Fix it.
Fixes: a110a81c52a9 ("sched/deadline: Deferrable dl server")
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20241127063740.8278-1-juri.lelli@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ef1b808e3b7c98612feceedf985c2fbbeb28f956 upstream.
Uprobes always use bpf_prog_run_array_uprobe() under tasks-trace-RCU
protection. But it is possible to attach a non-sleepable BPF program to a
uprobe, and non-sleepable BPF programs are freed via normal RCU (see
__bpf_prog_put_noref()). This leads to UAF of the bpf_prog because a normal
RCU grace period does not imply a tasks-trace-RCU grace period.
Fix it by explicitly waiting for a tasks-trace-RCU grace period after
removing the attachment of a bpf_prog to a perf_event.
Fixes: 8c7dcb84e3b7 ("bpf: implement sleepable uprobes by chaining gps")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20241210-bpf-fix-actual-uprobe-uaf-v1-1-19439849dd44@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6675ce20046d149e1e1ffe7e9577947dee17aad5 upstream.
do_softirq_post_smp_call_flush() on PREEMPT_RT kernels carries a
WARN_ON_ONCE() for any SOFTIRQ being raised from an SMP-call-function.
Since do_softirq_post_smp_call_flush() is called with preempt disabled,
raising a SOFTIRQ during flush_smp_call_function_queue() can lead to
longer preempt disabled sections.
Since commit b2a02fc43a1f ("smp: Optimize
send_call_function_single_ipi()") IPIs to an idle CPU in
TIF_POLLING_NRFLAG mode can be optimized out by instead setting
TIF_NEED_RESCHED bit in idle task's thread_info and relying on the
flush_smp_call_function_queue() in the idle-exit path to run the
SMP-call-function.
To trigger an idle load balancing, the scheduler queues
nohz_csd_function() responsible for triggering an idle load balancing on
a target nohz idle CPU and sends an IPI. Only now, this IPI is optimized
out and the SMP-call-function is executed from
flush_smp_call_function_queue() in do_idle() which can raise a
SCHED_SOFTIRQ to trigger the balancing.
So far, this went undetected since, the need_resched() check in
nohz_csd_function() would make it bail out of idle load balancing early
as the idle thread does not clear TIF_POLLING_NRFLAG before calling
flush_smp_call_function_queue(). The need_resched() check was added with
the intent to catch a new task wakeup, however, it has recently
discovered to be unnecessary and will be removed in the subsequent
commit after which nohz_csd_function() can raise a SCHED_SOFTIRQ from
flush_smp_call_function_queue() to trigger an idle load balance on an
idle target in TIF_POLLING_NRFLAG mode.
nohz_csd_function() bails out early if "idle_cpu()" check for the
target CPU, and does not lock the target CPU's rq until the very end,
once it has found tasks to run on the CPU and will not inhibit the
wakeup of, or running of a newly woken up higher priority task. Account
for this and prevent a WARN_ON_ONCE() when SCHED_SOFTIRQ is raised from
flush_smp_call_function_queue().
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241119054432.6405-2-kprateek.nayak@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 76031d9536a076bf023bedbdb1b4317fc801dd67 upstream.
Guenter reported boot stalls on a emulated ARM 32-bit platform, which has a
24-bit wide clocksource.
It turns out that the calculated maximal idle time, which limits idle
sleeps to prevent clocksource wrap arounds, is close to the point where the
negative motion detection triggers.
max_idle_ns: 597268854 ns
negative motion tripping point: 671088640 ns
If the idle wakeup is delayed beyond that point, the clocksource
advances far enough to trigger the negative motion detection. This
prevents the clock to advance and in the worst case the system stalls
completely if the consecutive sleeps based on the stale clock are
delayed as well.
Cure this by calculating a more robust cut-off value for negative motion,
which covers 87.5% of the actual clocksource counter width. Compare the
delta against this value to catch negative motion. This is specifically for
clock sources with a small counter width as their wrap around time is close
to the half counter width. For clock sources with wide counters this is not
a problem because the maximum idle time is far from the half counter width
due to the math overflow protection constraints.
For the case at hand this results in a tripping point of 1174405120ns.
Note, that this cannot prevent issues when the delay exceeds the 87.5%
margin, but that's not different from the previous unchecked version which
allowed arbitrary time jumps.
Systems with small counter width are prone to invalid results, but this
problem is unlikely to be seen on real hardware. If such a system
completely stalls for more than half a second, then there are other more
urgent problems than the counter wrapping around.
Fixes: c163e40af9b2 ("timekeeping: Always check for negative motion")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/all/8734j5ul4x.ffs@tglx
Closes: https://lore.kernel.org/all/387b120b-d68a-45e8-b6ab-768cd95d11c2@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d44d26987bb3df6d76556827097fc9ce17565cb8 upstream.
Since 135225a363ae timekeeping_cycles_to_ns() handles large offsets which
would lead to 64bit multiplication overflows correctly. It's also protected
against negative motion of the clocksource unconditionally, which was
exclusive to x86 before.
timekeeping_advance() handles large offsets already correctly.
That means the value of CONFIG_DEBUG_TIMEKEEPING which analyzed these cases
is very close to zero. Remove all of it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241031120328.536010148@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 494b332064c0ce2f7392fa92632bc50191c1b517 ]
Fix eprobe event to unregister event call and release eprobe when it fails
to add dynamic event correctly.
Link: https://lore.kernel.org/all/173289886698.73724.1959899350183686006.stgit@devnote2/
Fixes: 7491e2c44278 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0664e2c311b9fa43b33e3e81429cd0c2d7f9c638 ]
When running the following command:
while true; do
stress-ng --cyclic 30 --timeout 30s --minimize --quiet
done
a warning is eventually triggered:
WARNING: CPU: 43 PID: 2848 at kernel/sched/deadline.c:794
setup_new_dl_entity+0x13e/0x180
...
Call Trace:
<TASK>
? show_trace_log_lvl+0x1c4/0x2df
? enqueue_dl_entity+0x631/0x6e0
? setup_new_dl_entity+0x13e/0x180
? __warn+0x7e/0xd0
? report_bug+0x11a/0x1a0
? handle_bug+0x3c/0x70
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
enqueue_dl_entity+0x631/0x6e0
enqueue_task_dl+0x7d/0x120
__do_set_cpus_allowed+0xe3/0x280
__ |
