| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 0cf4b1687a187ba9247c71721d8b064634eda1f7 upstream.
While an OOM failure in commit_merge() isn't really feasible due to the
allocation which might fail (a maple tree pre-allocation) being 'too small
to fail', we do need to handle this case correctly regardless.
In vma_merge_existing_range(), we can theoretically encounter failures
which result in an OOM error in two ways - firstly dup_anon_vma() might
fail with an OOM error, and secondly commit_merge() failing, ultimately,
to pre-allocate a maple tree node.
The abort logic for dup_anon_vma() resets the VMA iterator to the initial
range, ensuring that any logic looping on this iterator will correctly
proceed to the next VMA.
However the commit_merge() abort logic does not do the same thing. This
resulted in a syzbot report occurring because mlockall() iterates through
VMAs, is tolerant of errors, but ended up with an incorrect previous VMA
being specified due to incorrect iterator state.
While making this change, it became apparent we are duplicating logic -
the logic introduced in commit 41e6ddcaa0f1 ("mm/vma: add give_up_on_oom
option on modify/merge, use in uffd release") duplicates the
vmg->give_up_on_oom check in both abort branches.
Additionally, we observe that we can perform the anon_dup check safely on
dup_anon_vma() failure, as this will not be modified should this call
fail.
Finally, we need to reset the iterator in both cases, so now we can simply
use the exact same code to abort for both.
We remove the VM_WARN_ON(err != -ENOMEM) as it would be silly for this to
be otherwise and it allows us to implement the abort check more neatly.
Link: https://lkml.kernel.org/r/20250606125032.164249-1-lorenzo.stoakes@oracle.com
Fixes: 47b16d0462a4 ("mm: abort vma_modify() on merge out of memory failure")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: syzbot+d16409ea9ecc16ed261a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/6842cc67.a00a0220.29ac89.003b.GAE@google.com/
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 081056dc00a27bccb55ccc3c6f230a3d5fd3f7e0 upstream.
Currently, __split_vma() triggers hugetlb page table unsharing through
vm_ops->may_split(). This happens before the VMA lock and rmap locks are
taken - which is too early, it allows racing VMA-locked page faults in our
process and racing rmap walks from other processes to cause page tables to
be shared again before we actually perform the split.
Fix it by explicitly calling into the hugetlb unshare logic from
__split_vma() in the same place where THP splitting also happens. At that
point, both the VMA and the rmap(s) are write-locked.
An annoying detail is that we can now call into the helper
hugetlb_unshare_pmds() from two different locking contexts:
1. from hugetlb_split(), holding:
- mmap lock (exclusively)
- VMA lock
- file rmap lock (exclusively)
2. hugetlb_unshare_all_pmds(), which I think is designed to be able to
call us with only the mmap lock held (in shared mode), but currently
only runs while holding mmap lock (exclusively) and VMA lock
Backporting note:
This commit fixes a racy protection that was introduced in commit
b30c14cd6102 ("hugetlb: unshare some PMDs when splitting VMAs"); that
commit claimed to fix an issue introduced in 5.13, but it should actually
also go all the way back.
[jannh@google.com: v2]
Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-1-1329349bad1a@google.com
Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-0-1329349bad1a@google.com
Link: https://lkml.kernel.org/r/20250527-hugetlb-fixes-splitrace-v1-1-f4136f5ec58a@google.com
Fixes: 39dde65c9940 ("[PATCH] shared page table for hugetlb page")
Signed-off-by: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [b30c14cd6102: hugetlb: unshare some PMDs when splitting VMAs]
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2b12d06c37fd3a394376f42f026a7478d826ed63 upstream.
Patch series "Fix uprobe pte be overwritten when expanding vma".
This patch (of 4):
We encountered a BUG alert triggered by Syzkaller as follows:
BUG: Bad rss-counter state mm:00000000b4a60fca type:MM_ANONPAGES val:1
And we can reproduce it with the following steps:
1. register uprobe on file at zero offset
2. mmap the file at zero offset:
addr1 = mmap(NULL, 2 * 4096, PROT_NONE, MAP_PRIVATE, fd, 0);
3. mremap part of vma1 to new vma2:
addr2 = mremap(addr1, 4096, 2 * 4096, MREMAP_MAYMOVE);
4. mremap back to orig addr1:
mremap(addr2, 4096, 4096, MREMAP_MAYMOVE | MREMAP_FIXED, addr1);
In step 3, the vma1 range [addr1, addr1 + 4096] will be remap to new vma2
with range [addr2, addr2 + 8192], and remap uprobe anon page from the vma1
to vma2, then unmap the vma1 range [addr1, addr1 + 4096].
In step 4, the vma2 range [addr2, addr2 + 4096] will be remap back to the
addr range [addr1, addr1 + 4096]. Since the addr range [addr1 + 4096,
addr1 + 8192] still maps the file, it will take vma_merge_new_range to
expand the range, and then do uprobe_mmap in vma_complete. Since the
merged vma pgoff is also zero offset, it will install uprobe anon page to
the merged vma. However, the upcomming move_page_tables step, which use
set_pte_at to remap the vma2 uprobe pte to the merged vma, will overwrite
the newly uprobe pte in the merged vma, and lead that pte to be orphan.
Since the uprobe pte will be remapped to the merged vma, we can remove the
unnecessary uprobe_mmap upon merged vma.
This problem was first found in linux-6.6.y and also exists in the
community syzkaller:
https://lore.kernel.org/all/000000000000ada39605a5e71711@google.com/T/
Link: https://lkml.kernel.org/r/20250529155650.4017699-1-pulehui@huaweicloud.com
Link: https://lkml.kernel.org/r/20250529155650.4017699-2-pulehui@huaweicloud.com
Fixes: 2b1444983508 ("uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Suggested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If, during a mremap() operation for a hugetlb-backed memory mapping,
copy_vma() fails after the source vma has been duplicated and opened (ie.
vma_link() fails), the error is handled by closing the new vma. This
updates the hugetlbfs reservation counter of the reservation map which at
this point is referenced by both the source vma and the new copy. As a
result, once the new vma has been freed and copy_vma() returns, the
reservation counter for the source vma will be incorrect.
This patch addresses this corner case by clearing the hugetlb private page
reservation reference for the new vma and decrementing the reference
before closing the vma, so that vma_close() won't update the reservation
counter. This is also what copy_vma_and_data() does with the source vma
if copy_vma() succeeds, so a helper function has been added to do the
fixup in both functions.
The issue was reported by a private syzbot instance and can be reproduced
using the C reproducer in [1]. It's also a possible duplicate of public
syzbot report [2]. The WARNING report is:
============================================================
page_counter underflow: -1024 nr_pages=1024
WARNING: CPU: 0 PID: 3287 at mm/page_counter.c:61 page_counter_cancel+0xf6/0x120
Modules linked in:
CPU: 0 UID: 0 PID: 3287 Comm: repro__WARNING_ Not tainted 6.15.0-rc7+ #54 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-2-gc13ff2cd-prebuilt.qemu.org 04/01/2014
RIP: 0010:page_counter_cancel+0xf6/0x120
Code: ff 5b 41 5e 41 5f 5d c3 cc cc cc cc e8 f3 4f 8f ff c6 05 64 01 27 06 01 48 c7 c7 60 15 f8 85 48 89 de 4c 89 fa e8 2a a7 51 ff <0f> 0b e9 66 ff ff ff 44 89 f9 80 e1 07 38 c1 7c 9d 4c 81
RSP: 0018:ffffc900025df6a0 EFLAGS: 00010246
RAX: 2edfc409ebb44e00 RBX: fffffffffffffc00 RCX: ffff8880155f0000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: dffffc0000000000 R08: ffffffff81c4a23c R09: 1ffff1100330482a
R10: dffffc0000000000 R11: ffffed100330482b R12: 0000000000000000
R13: ffff888058a882c0 R14: ffff888058a882c0 R15: 0000000000000400
FS: 0000000000000000(0000) GS:ffff88808fc53000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004b33e0 CR3: 00000000076d6000 CR4: 00000000000006f0
Call Trace:
<TASK>
page_counter_uncharge+0x33/0x80
hugetlb_cgroup_uncharge_counter+0xcb/0x120
hugetlb_vm_op_close+0x579/0x960
? __pfx_hugetlb_vm_op_close+0x10/0x10
remove_vma+0x88/0x130
exit_mmap+0x71e/0xe00
? __pfx_exit_mmap+0x10/0x10
? __mutex_unlock_slowpath+0x22e/0x7f0
? __pfx_exit_aio+0x10/0x10
? __up_read+0x256/0x690
? uprobe_clear_state+0x274/0x290
? mm_update_next_owner+0xa9/0x810
__mmput+0xc9/0x370
exit_mm+0x203/0x2f0
? __pfx_exit_mm+0x10/0x10
? taskstats_exit+0x32b/0xa60
do_exit+0x921/0x2740
? do_raw_spin_lock+0x155/0x3b0
? __pfx_do_exit+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? _raw_spin_lock_irq+0xc5/0x100
do_group_exit+0x20c/0x2c0
get_signal+0x168c/0x1720
? __pfx_get_signal+0x10/0x10
? schedule+0x165/0x360
arch_do_signal_or_restart+0x8e/0x7d0
? __pfx_arch_do_signal_or_restart+0x10/0x10
? __pfx___se_sys_futex+0x10/0x10
syscall_exit_to_user_mode+0xb8/0x2c0
do_syscall_64+0x75/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x422dcd
Code: Unable to access opcode bytes at 0x422da3.
RSP: 002b:00007ff266cdb208 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: 0000000000000001 RBX: 00007ff266cdbcdc RCX: 0000000000422dcd
RDX: 00000000000f4240 RSI: 0000000000000081 RDI: 00000000004c7bec
RBP: 00007ff266cdb220 R08: 203a6362696c6720 R09: 203a6362696c6720
R10: 0000200000c00000 R11: 0000000000000246 R12: ffffffffffffffd0
R13: 0000000000000002 R14: 00007ffe1cb5f520 R15: 00007ff266cbb000
</TASK>
============================================================
Link: https://lkml.kernel.org/r/20250523-warning_in_page_counter_cancel-v2-1-b6df1a8cfefd@igalia.com
Link: https://people.igalia.com/rcn/kernel_logs/20250422__WARNING_in_page_counter_cancel__repro.c [1]
Link: https://lore.kernel.org/all/67000a50.050a0220.49194.048d.GAE@google.com/ [2]
Signed-off-by: Ricardo Cañuelo Navarro <rcn@igalia.com>
Suggested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Florent Revest <revest@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, if a VMA merge fails due to an OOM condition arising on commit
merge or a failure to duplicate anon_vma's, we report this so the caller
can handle it.
However there are cases where the caller is only ostensibly trying a
merge, and doesn't mind if it fails due to this condition.
Since we do not want to introduce an implicit assumption that we only
actually modify VMAs after OOM conditions might arise, add a 'give up on
oom' option and make an explicit contract that, should this flag be set, we
absolutely will not modify any VMAs should OOM arise and just bail out.
Since it'd be very unusual for a user to try to vma_modify() with this flag
set but be specifying a range within a VMA which ends up being split (which
can fail due to rlimit issues, not only OOM), we add a debug warning for
this condition.
The motivating reason for this is uffd release - syzkaller (and Pedro
Falcato's VERY astute analysis) found a way in which an injected fault on
allocation, triggering an OOM condition on commit merge, would result in
uffd code becoming confused and treating an error value as if it were a VMA
pointer.
To avoid this, we make use of this new VMG flag to ensure that this never
occurs, utilising the fact that, should we be clearing entire VMAs, we do
not wish an OOM event to be reported to us.
Many thanks to Pedro Falcato for his excellent analysis and Jann Horn for
his insightful and intelligent analysis of the situation, both of whom were
instrumental in this fix.
Link: https://lkml.kernel.org/r/20250321100937.46634-1-lorenzo.stoakes@oracle.com
Reported-by: syzbot+20ed41006cf9d842c2b5@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67dc67f0.050a0220.25ae54.001e.GAE@google.com/
Fixes: 47b16d0462a4 ("mm: abort vma_modify() on merge out of memory failure")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Suggested-by: Pedro Falcato <pfalcato@suse.de>
Suggested-by: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
To enable SLAB_TYPESAFE_BY_RCU for vma cache we need to ensure that
object reuse before RCU grace period is over will be detected by
lock_vma_under_rcu().
Current checks are sufficient as long as vma is detached before it is
freed. The only place this is not currently happening is in exit_mmap().
Add the missing vma_mark_detached() in exit_mmap().
Another issue which might trick lock_vma_under_rcu() during vma reuse is
vm_area_dup(), which copies the entire content of the vma into a new one,
overriding new vma's vm_refcnt and temporarily making it appear as
attached. This might trick a racing lock_vma_under_rcu() to operate on a
reused vma if it found the vma before it got reused. To prevent this
situation, we should ensure that vm_refcnt stays at detached state (0)
when it is copied and advances to attached state only after it is added
into the vma tree. Introduce vm_area_init_from() which preserves new
vma's vm_refcnt and use it in vm_area_dup(). Since all vmas are in
detached state with no current readers when they are freed,
lock_vma_under_rcu() will not be able to take vm_refcnt after vma got
detached even if vma is reused. vma_mark_attached() in modified to
include a release fence to ensure all stores to the vma happen before
vm_refcnt gets initialized.
Finally, make vm_area_cachep SLAB_TYPESAFE_BY_RCU. This will facilitate
vm_area_struct reuse and will minimize the number of call_rcu() calls.
[surenb@google.com: remove atomic_set_release() usage in tools/]
Link: https://lkml.kernel.org/r/20250217054351.2973666-1-surenb@google.com
Link: https://lkml.kernel.org/r/20250213224655.1680278-18-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Shivank Garg <shivankg@amd.com>
Link: https://lkml.kernel.org/r/5e19ec93-8307-47c2-bb13-3ddf7150624e@amd.com
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When exit_mmap() removes vmas belonging to an exiting task, it does not
mark them as detached since they can't be reached by other tasks and they
will be freed shortly. Once we introduce vma reuse, all vmas will have to
be in detached state before they are freed to ensure vma when reused is in
a consistent state. Add missing vma_mark_detached() before freeing the
vma.
Link: https://lkml.kernel.org/r/20250213224655.1680278-6-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: Shivank Garg <shivankg@amd.com>
Link: https://lkml.kernel.org/r/5e19ec93-8307-47c2-bb13-3ddf7150624e@amd.com
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
vma_iter_store() functions can be used both when adding a new vma and when
updating an existing one. However for existing ones we do not need to
mark them attached as they are already marked that way. With
vma->detached being a separate flag, double-marking a vmas as attached or
detached is not an issue because the flag will simply be overwritten with
the same value. However once we fold this flag into the refcount later in
this series, re-attaching or re-detaching a vma becomes an issue since
these operations will be incrementing/decrementing a refcount.
Introduce vma_iter_store_new() and vma_iter_store_overwrite() to replace
vma_iter_store() and avoid re-attaching a vma during vma update. Add
assertions in vma_mark_attached()/vma_mark_detached() to catch invalid
usage. Update vma tests to check for vma detached state correctness.
Link: https://lkml.kernel.org/r/20250213224655.1680278-5-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Tested-by: Shivank Garg <shivankg@amd.com>
Link: https://lkml.kernel.org/r/5e19ec93-8307-47c2-bb13-3ddf7150624e@amd.com
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Current implementation does not set detached flag when a VMA is first
allocated. This does not represent the real state of the VMA, which is
detached until it is added into mm's VMA tree. Fix this by marking new
VMAs as detached and resetting detached flag only after VMA is added into
a tree.
Introduce vma_mark_attached() to make the API more readable and to
simplify possible future cleanup when vma->vm_mm might be used to indicate
detached vma and vma_mark_attached() will need an additional mm parameter.
Link: https://lkml.kernel.org/r/20250213224655.1680278-4-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Tested-by: Shivank Garg <shivankg@amd.com>
Link: https://lkml.kernel.org/r/5e19ec93-8307-47c2-bb13-3ddf7150624e@amd.com
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The adj_start calculation has been a constant source of confusion in the
VMA merge code.
There are two cases to consider, one where we adjust the start of the
vmg->middle VMA (i.e. the vmg->__adjust_middle_start merge flag is set),
in which case adj_start is calculated as:
(1) adj_start = vmg->end - vmg->middle->vm_start
And the case where we adjust the start of the vmg->next VMA (i.e. the
vmg->__adjust_next_start merge flag is set), in which case adj_start is
calculated as:
(2) adj_start = -(vmg->middle->vm_end - vmg->end)
We apply (1) thusly:
vmg->middle->vm_start =
vmg->middle->vm_start + vmg->end - vmg->middle->vm_start
Which simplifies to:
vmg->middle->vm_start = vmg->end
Similarly, we apply (2) as:
vmg->next->vm_start =
vmg->next->vm_start + -(vmg->middle->vm_end - vmg->end)
Noting that for these VMAs to be mergeable vmg->middle->vm_end ==
vmg->next->vm_start and so this simplifies to:
vmg->next->vm_start =
vmg->next->vm_start + -(vmg->next->vm_start - vmg->end)
Which simplifies to:
vmg->next->vm_start = vmg->end
Therefore in each case, we simply need to adjust the start of the VMA to
vmg->end (!) and can do away with this adj_start calculation. The only
caveat is that we must ensure we update the vm_pgoff field correctly.
We therefore abstract this entire calculation to a new function
vmg_adjust_set_range() which performs this calculation and sets the
adjusted VMA's new range using the general vma_set_range() function.
We also must update vma_adjust_trans_huge() which expects the
now-abstracted adj_start parameter. It turns out this is wholly
unnecessary.
In vma_adjust_trans_huge() the relevant code is:
if (adjust_next > 0) {
struct vm_area_struct *next = find_vma(vma->vm_mm, vma->vm_end);
unsigned long nstart = next->vm_start;
nstart += adjust_next;
split_huge_pmd_if_needed(next, nstart);
}
The only case where this is relevant is when vmg->__adjust_middle_start is
specified (in which case adj_next would have been positive), i.e. the one
in which the vma specified is vmg->prev and this the sought 'next' VMA
would be vmg->middle.
We can therefore eliminate the find_vma() invocation altogether and simply
provide the vmg->middle VMA in this instance, or NULL otherwise.
Again we have an adj_next offset calculation:
next->vm_start + vmg->end - vmg->middle->vm_start
Where next == vmg->middle this simplifies to vmg->end as previously
demonstrated.
Therefore nstart is equal to vmg->end, which is already passed to
vma_adjust_trans_huge() via the 'end' parameter and so this code (rather
delightfully) simplifies to:
if (next)
split_huge_pmd_if_needed(next, end);
With these changes in place, it becomes silly for commit_merge() to return
vmg->target, as it is always the same and threaded through vmg, so we
finally change commit_merge() to return an error value once again.
This patch has no change in functional behaviour.
Link: https://lkml.kernel.org/r/7bce2cd4b5afb56211822835d145471280c3dccc.1738326519.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It is confusing for vmg->target to sometimes be the target merged VMA and
in one case not.
Fix this by having commit_merge() use its awareness of the
vmg->_adjust_next_start case to know that it is manipulating a separate
vma, abstracted in the 'vma' local variable.
Place removal and adjust VMA determination logic into
init_multi_vma_prep(), as the flags give us enough information to do so,
and since this is the function that sets up the vma_prepare struct it
makes sense to do so here.
Doing this significantly simplifies commit_merge(), allowing us to
eliminate the 'merge_target' handling, initialise the VMA iterator in a
more sensible place and simply return vmg->target consistently.
This also allows us to simplify setting vmg->target in
vma_merge_existing_range() since we are then left only with two cases -
merge left (or both) where the target is vmg->prev or merge right in which
the target is vmg->next.
This makes it easy for somebody reading the code to know what VMA will
actually be the one returned and merged into and removes a great deal of
the confusing 'adjust' nonsense.
This patch has no change in functional behaviour.
Link: https://lkml.kernel.org/r/50f96e31ab1980eaaf1006e34a4f6e6dad9320b8.1738326519.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Introduce internal vmg->__adjust_middle_start and vmg->__adjust_next_start
merge flags, enabling us to indicate to commit_merge() that we are
performing a merge which either spans only part of vmg->middle, or part of
vmg->next respectively.
In the former instance, we change the start of vmg->middle to match the
attributes of vmg->prev, without spanning all of vmg->middle.
This implies that vmg->prev->vm_end and vmg->middle->vm_start are both
increased to form the new merged VMA (vmg->prev) and the new subsequent
VMA (vmg->middle).
In the latter case, we change the end of vmg->middle to match the
attributes of vmg->next, without spanning all of vmg->next.
This implies that vmg->middle->vm_end and vmg->next->vm_start are both
decreased to form the new merged VMA (vmg->next) and the new prior VMA
(vmg->middle).
Since we now have a stable set of prev, middle, next VMAs threaded through
vmg and with these flags set know what is happening, we can perform the
calculation in commit_merge() instead.
This allows us to drop the confusing adj_start parameter and instead pass
semantic information to commit_merge().
In the latter case the -(middle->vm_end - start) calculation becomes
-(middle->vm-end - vmg->end), however this is correct as vmg->end is set
to the start parameter.
This is because in this case (rather confusingly), we manipulate
vmg->middle, but ultimately return vmg->next, whose range will be
correctly specified. At this point vmg->start, end is the new range for
the prior VMA rather than the merged one.
This patch has no change in functional behaviour.
Link: https://lkml.kernel.org/r/bcec0cd980b373a5eb02236cb033034ce1effe42.1738326519.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current VMA merge mechanism contains a number of confusing mechanisms
around removal of VMAs on merge and the shrinking of the VMA adjacent to
vma->target in the case of merges which result in a partial merge with
that adjacent VMA.
Since we now have a STABLE set of VMAs - prev, middle, next - we are now
able to have the caller of commit_merge() explicitly tell us which VMAs
need deleting, using newly introduced internal VMA merge flags.
Doing so allows us to embed this state within the VMG and remove the
confusing remove, remove2 parameters from commit_merge().
We additionally are able to eliminate the highly confusing and misleading
'expanded' parameter - a parameter that in reality refers to whether or
not the return VMA is the target one or the one immediately adjacent.
We can infer which is the case from whether or not the adj_start parameter
is negative. This also allows us to simplify further logic around
iterator configuration and VMA iterator stores.
Doing so means we can also eliminate the adjust parameter, as we are able
to infer which VMA ought to be adjusted from adj_start - a positive value
implies we adjust the start of 'middle', a negative one implies we adjust
the start of 'next'.
We are then able to have commit_merge() explicitly return the target VMA,
or NULL on inability to pre-allocate memory. Errors were previously
filtered so behaviour does not change.
We additionally move from the slightly odd use of a bitwise-flag enum
vmg->merge_flags field to vmg bitfields.
This patch has no change in functional behaviour.
Link: https://lkml.kernel.org/r/7bf2ed24af68aac18672b7acebbd9102f48c5b03.1738326519.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: further simplify VMA merge operation", v3.
While significant efforts have been made to improve the VMA merge
operation, there remains remnants of the bad (or rather confusing) old
days, which make the code difficult to understand, more bug prone and thus
harder to modify.
This series attempts to significantly improve matters in a number of
respects - with a focus on simplifying the commit_merge() function which
actually actions the merge operation - and importantly, adjusting the two
most confusing merge cases - those in which we 'adjust' the VMA
immediately adjacent to the one being merged.
One source of confusion are the VMAs being threaded through the operation
themselves - vmg->prev, vmg->vma and vmg->next.
At the start of the operation, vmg->vma is either NULL if a new VMA is
propose to be added, or if not then a pointer to an existing VMA being
modified, and prev/next are (perhaps not present) VMAs sat immediately
before and after the range specified in vmg->start, end, respectively.
However, during the VMA merge operation, we change vmg->start, end and
pgoff to span the newly merged range and vmg->vma to either be:
a. The ultimately returned VMA (in most cases) or b. A VMA which we will
manipulate, but ultimately instead return vmg->next.
Case b. especially here is confusing for somebody reading this code, but
the fact we update this state, along with vmg->start, end, pgoff only
makes matters worse.
We simplify things by replacing vmg->vma with vmg->middle and never
changing it - this is always either NULL (for a new VMA) or the VMA being
modified between vmg->prev and vmg->next.
We further simplify by placing the merged VMA in a new vmg->target field -
whether case b. above is the case or not. The reader of the code can now
simply rely on vmg->middle being the middle VMA and vmg->target being the
ultimately merged VMA.
We additionally tackle the confusing cases where we 'adjust' VMAs other
than the one we ultimately return as the merged VMA (this includes case b.
above). These are:
(1)
merge
<----------->
|------||--------| |------------|---|
| prev || middle | -> | target | m |
|------||--------| |------------|---|
In which case middle must be adjusted so middle->vm_start is increased as
well as performing the merge.
(2) (equivalent to case b. above)
<------------->
|---------||------| |---|-------------|
| middle || next | -> | m | target |
|---------||------| |---|-------------|
In which case next must be adjusted so next->vm_start is decreased as well
as performing the merge.
This cases have previously been performed by calculating and passing
around a dubious and confusing 'adj_start' parameter along side a pointer
to an 'adjust' VMA indicating which VMA requires additional adjustment
(middle in case 1 and next in case 2).
With the VMG structure in place we are able to avoid this by simply
setting a merge flag to describe each case:
(1) Sets the vmg->__adjust_middle_start flag
(2) Sets the vmg->__adjust_next_start flag
By doing so it turns out we can vastly simplify the logic and calculate
what is required to perform the operation.
Taken together the refactorings make it far easier to understand what is
being done even in these more confusing cases, make the code far more
maintainable, debuggable, and testable, providing more internal state
indicating what is happening in the merge operation.
The changes have no functional net impact on the merge operation and
everything should still behave as it did before.
This patch (of 5):
The merge code, while much improved, still has a number of points of
confusion. As part of a broader series cleaning this up to make this more
maintainable, we start by addressing some confusion around
vma_merge_struct fields.
So far, the caller either provides no vmg->vma (a new VMA) or supplies the
existing VMA which is being altered, setting vmg->start,end,pgoff to the
proposed VMA dimensions.
vmg->vma is then updated, as are vmg->start,end,pgoff as the merge process
proceeds and the appropriate merge strategy is determined.
This is rather confusing, as vmg->vma starts off as the 'middle' VMA
between vmg->prev,next, but becomes the 'target' VMA, except in one
specific edge case (merge next, shrink middle).
Int his patch we introduce vmg->middle to describe the VMA that is between
vmg->prev and vmg->next, and does NOT change during the merge operation.
We replace vmg->vma with vmg->target, and use this only during the merge
operation itself.
Aside from the merge right, shrink middle case, this becomes the VMA that
forms the basis of the VMA that is returned. This edge case can be
addressed in a future commit.
We also add a number of comments to explain what is going on.
Finally, we adjust the ASCII diagrams showing each merge case in
vma_merge_existing_range() to be clearer - the arrow range previously
showed the vmg->start, end spanned area, but it is clearer to change this
to show the final merged VMA.
This patch has no change in functional behaviour.
Link: https://lkml.kernel.org/r/cover.1738326519.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/4dfe60f1419d55e5d0516f56349695d73a57184c.1738326519.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We already are registering private-anon VMAs with khugepaged during fault
time, in do_huge_pmd_anonymous_page(). Commit "register suitable readonly
file vmas for khugepaged" moved the khugepaged registration logic from
shmem_mmap to the generic mmap path.
The userspace-visible effect should be this: khugepaged will unnecessarily
scan mm's which haven't yet faulted in. Note that it won't actually
collapse because all PTEs are none.
Now that I think about it, the mm is going to have a file VMA anyways
during fork+exec, so the mm already gets registered during mmap due to the
non-anon case (I *think*), so at least one of either the mmap registration
or fault-time registration is redundant.
Make this logic specific for non-anon mappings.
Link: https://lkml.kernel.org/r/20250306063037.16299-1-dev.jain@arm.com
Fixes: 613bec092fe7 ("mm: mmap: register suitable readonly file vmas for khugepaged")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The remainder of vma_modify() relies upon the vmg state remaining pristine
after a merge attempt.
Usually this is the case, however in the one edge case scenario of a merge
attempt failing not due to the specified range being unmergeable, but
rather due to an out of memory error arising when attempting to commit the
merge, this assumption becomes untrue.
This results in vmg->start, end being modified, and thus the proceeding
attempts to split the VMA will be done with invalid start/end values.
Thankfully, it is likely practically impossible for us to hit this in
reality, as it would require a maple tree node pre-allocation failure that
would likely never happen due to it being 'too small to fail', i.e. the
kernel would simply keep retrying reclaim until it succeeded.
However, this scenario remains theoretically possible, and what we are
doing here is wrong so we must correct it.
The safest option is, when this scenario occurs, to simply give up the
operation. If we cannot allocate memory to merge, then we cannot allocate
memory to split either (perhaps moreso!).
Any scenario where this would be happening would be under very extreme
(likely fatal) memory pressure, so it's best we give up early.
So there is no doubt it is appropriate to simply bail out in this
scenario.
However, in general we must if at all possible never assume VMG state is
stable after a merge attempt, since merge operations update VMG fields.
As a result, additionally also make this clear by storing start, end in
local variables.
The issue was reported originally by syzkaller, and by Brad Spengler (via
an off-list discussion), and in both instances it manifested as a
triggering of the assert:
VM_WARN_ON_VMG(start >= end, vmg);
In vma_merge_existing_range().
It seems at least one scenario in which this is occurring is one in which
the merge being attempted is due to an madvise() across multiple VMAs
which looks like this:
start end
|<------>|
|----------|------|
| vma | next |
|----------|------|
When madvise_walk_vmas() is invoked, we first find vma in the above
(determining prev to be equal to vma as we are offset into vma), and then
enter the loop.
We determine the end of vma that forms part of the range we are
madvise()'ing by setting 'tmp' to this value:
/* Here vma->vm_start <= start < (end|vma->vm_end) */
tmp = vma->vm_end;
We then invoke the madvise() operation via visit(), letting prev get
updated to point to vma as part of the operation:
/* Here vma->vm_start <= start < tmp <= (end|vma->vm_end). */
error = visit(vma, &prev, start, tmp, arg);
Where the visit() function pointer in this instance is
madvise_vma_behavior().
As observed in syzkaller reports, it is ultimately madvise_update_vma()
that is invoked, calling vma_modify_flags_name() and vma_modify() in turn.
Then, in vma_modify(), we attempt the merge:
merged = vma_merge_existing_range(vmg);
if (merged)
return merged;
We invoke this with vmg->start, end set to start, tmp as such:
start tmp
|<--->|
|----------|------|
| vma | next |
|----------|------|
We find ourselves in the merge right scenario, but the one in which we
cannot remove the middle (we are offset into vma).
Here we have a special case where vmg->start, end get set to perhaps
unintuitive values - we intended to shrink the middle VMA and expand the
next.
This means vmg->start, end are set to... vma->vm_start, start.
Now the commit_merge() fails, and vmg->start, end are left like this.
This means we return to the rest of vma_modify() with vmg->start, end
(here denoted as start', end') set as:
start' end'
|<-->|
|----------|------|
| vma | next |
|----------|------|
So we now erroneously try to split accordingly. This is where the
unfortunate stuff begins.
We start with:
/* Split any preceding portion of the VMA. */
if (vma->vm_start < vmg->start) {
...
}
This doesn't trigger as we are no longer offset into vma at the start.
But then we invoke:
/* Split any trailing portion of the VMA. */
if (vma->vm_end > vmg->end) {
...
}
Which does get invoked. This leaves us with:
start' end'
|<-->|
|----|-----|------|
| vma| new | next |
|----|-----|------|
We then return ultimately to madvise_walk_vmas(). Here 'new' is unknown,
and putting back the values known in this function we are faced with:
start tmp end
| | |
|----|-----|------|
| vma| new | next |
|----|-----|------|
prev
Then:
start = tmp;
So:
start end
| |
|----|-----|------|
| vma| new | next |
|----|-----|------|
prev
The following code does not cause anything to happen:
if (prev && start < prev->vm_end)
start = prev->vm_end;
if (start >= end)
break;
And then we invoke:
if (prev)
vma = find_vma(mm, prev->vm_end);
Which is where a problem occurs - we don't know about 'new' so we
essentially look for the vma after prev, which is new, whereas we actually
intended to discover next!
So we end up with:
start end
| |
|----|-----|------|
|prev| vma | next |
|----|-----|------|
And we have successfully bypassed all of the checks madvise_walk_vmas()
has to ensure early exit should we end up moving out of range.
We loop around, and hit:
/* Here vma->vm_start <= start < (end|vma->vm_end) */
tmp = vma->vm_end;
Oh dear. Now we have:
tmp
start end
| |
|----|-----|------|
|prev| vma | next |
|----|-----|------|
We then invoke:
/* Here vma->vm_start <= start < tmp <= (end|vma->vm_end). */
error = visit(vma, &prev, start, tmp, arg);
Where start == tmp. That is, a zero range. This is not good.
We invoke visit() which is madvise_vma_behavior() which does not check the
range (for good reason, it assumes all checks have been done before it was
called), which in turn finally calls madvise_update_vma().
The madvise_update_vma() function calls vma_modify_flags_name() in turn,
which ultimately invokes vma_modify() with... start == end.
vma_modify() calls vma_merge_existing_range() and finally we hit:
VM_WARN_ON_VMG(start >= end, vmg);
Which triggers, as start == end.
While it might be useful to add some CONFIG_DEBUG_VM asserts in these
instances to catch this kind of error, since we have just eliminated any
possibility of that happening, we will add such asserts separately as to
reduce churn and aid backporting.
Link: https://lkml.kernel.org/r/20250222161952.41957-1-lorenzo.stoakes@oracle.com
Fixes: 2f1c6611b0a8 ("mm: introduce vma_merge_struct and abstract vma_merge(),vma_modify()")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: Brad Spengler <brad.spengler@opensrcsec.com>
Reported-by: Brad Spengler <brad.spengler@opensrcsec.com>
Reported-by: syzbot+46423ed8fa1f1148c6e4@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/6774c98f.050a0220.25abdd.0991.GAE@google.com/
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that we have removed the one user of mmap_region() outside of mm, make
it internal and add it to vma.c so it can be userland tested.
This ensures that all external memory mappings are performed using the
appropriate interfaces and allows us to modify memory mapping logic as we
see fit.
Additionally expand test stubs to allow for the mmap_region() code to
compile and be userland testable.
Link: https://lkml.kernel.org/r/de5a3c574d35c26237edf20a1d8652d7305709c9.1735819274.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now we have VM_WARN_ON_VMG() to provide us with considerably more debug
output when a debug assert fails, utilise it everywhere we can.
This allows us to have considerably more information to go on when things
go wrong, especially when a non-repro issue occurs as reported by
syzkaller or the like.
Link: https://lkml.kernel.org/r/986e45e9549e71284ac7a7fa878688568a94d58b.1735932169.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There seem to be several categories of calls to lru_add_drain and
lru_add_drain_all.
The first are code paths that recently allocated, swapped in, or otherwise
processed a batch of pages, and want them all on the LRU. These drain
pages that were recently allocated, probably on the local CPU.
A second category are code paths that are actively trying to reclaim,
migrate, or offline memory. These often use lru_add_drain_all, to drain
the caches on all CPUs.
However, there also seem to be some other callers where we aren't really
doing either. They are calling lru_add_drain(), despite operating on
pages that may have been allocated long ago, and quite possibly on
different CPUs.
Those calls are not likely to be effective at anything but creating lock
contention on the LRU locks.
Remove the lru_add_drain calls in the latter category.
For detailed reasoning, see [1] and [2].
Link: https://lkml.kernel.org/r/dca2824e8e88e826c6b260a831d79089b5b9c79d.camel@surriel.com [1]
Link: https://lkml.kernel.org/r/xxfhcjaq2xxcl5adastz5omkytenq7izo2e5f4q7e3ns4z6lko@odigjjc7hqrg [2]
Link: https://lkml.kernel.org/r/20241219153253.3da9e8aa@fangorn
Signed-off-by: Rik van Riel <riel@surriel.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It is of critical importance to check the return results on VMA merge (and
split), failure to do so can result in use-after-free's. This bug has
recurred, so have the compiler enforce this check to prevent any future
repetition.
Link: https://lkml.kernel.org/r/20241206225036.273103-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This was arbitrarily left in mmap.c it makes no sense being there, move it
to vma.c to render it testable. |
