| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The zswap writeback mechanism can cause a race condition resulting in
memory corruption, where a swapped out page gets swapped in with data that
was written to a different page.
The race unfolds like this:
1. a page with data A and swap offset X is stored in zswap
2. page A is removed off the LRU by zpool driver for writeback in
zswap-shrink work, data for A is mapped by zpool driver
3. user space program faults and invalidates page entry A, offset X is
considered free
4. kswapd stores page B at offset X in zswap (zswap could also be
full, if so, page B would then be IOed to X, then skip step 5.)
5. entry A is replaced by B in tree->rbroot, this doesn't affect the
local reference held by zswap-shrink work
6. zswap-shrink work writes back A at X, and frees zswap entry A
7. swapin of slot X brings A in memory instead of B
The fix:
Once the swap page cache has been allocated (case ZSWAP_SWAPCACHE_NEW),
zswap-shrink work just checks that the local zswap_entry reference is
still the same as the one in the tree. If it's not the same it means that
it's either been invalidated or replaced, in both cases the writeback is
aborted because the local entry contains stale data.
Reproducer:
I originally found this by running `stress` overnight to validate my work
on the zswap writeback mechanism, it manifested after hours on my test
machine. The key to make it happen is having zswap writebacks, so
whatever setup pumps /sys/kernel/debug/zswap/written_back_pages should do
the trick.
In order to reproduce this faster on a vm, I setup a system with ~100M of
available memory and a 500M swap file, then running `stress --vm 1
--vm-bytes 300000000 --vm-stride 4000` makes it happen in matter of tens
of minutes. One can speed things up even more by swinging
/sys/module/zswap/parameters/max_pool_percent up and down between, say, 20
and 1; this makes it reproduce in tens of seconds. It's crucial to set
`--vm-stride` to something other than 4096 otherwise `stress` won't
realize that memory has been corrupted because all pages would have the
same data.
Link: https://lkml.kernel.org/r/20230503151200.19707-1-cerasuolodomenico@gmail.com
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Chris Li (Google) <chrisl@kernel.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since commit 1ba3cbf3ec3b ("mm: kfence: improve the performance of
__kfence_alloc() and __kfence_free()"), kfence reports failures in random
places at boot on big endian machines.
The problem is that the new KFENCE_CANARY_PATTERN_U64 encodes the address
of each byte in its value, so it needs to be byte swapped on big endian
machines.
The compiler is smart enough to do the le64_to_cpu() at compile time, so
there is no runtime overhead.
Link: https://lkml.kernel.org/r/20230505035127.195387-1-mpe@ellerman.id.au
Fixes: 1ba3cbf3ec3b ("mm: kfence: improve the performance of __kfence_alloc() and __kfence_free()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Under memory pressure, we sometimes observe the following crash:
[ 5694.832838] ------------[ cut here ]------------
[ 5694.842093] list_del corruption, ffff888014b6a448->next is LIST_POISON1 (dead000000000100)
[ 5694.858677] WARNING: CPU: 33 PID: 418824 at lib/list_debug.c:47 __list_del_entry_valid+0x42/0x80
[ 5694.961820] CPU: 33 PID: 418824 Comm: fuse_counters.s Kdump: loaded Tainted: G S 5.19.0-0_fbk3_rc3_hoangnhatpzsdynshrv41_10870_g85a9558a25de #1
[ 5694.990194] Hardware name: Wiwynn Twin Lakes MP/Twin Lakes Passive MP, BIOS YMM16 05/24/2021
[ 5695.007072] RIP: 0010:__list_del_entry_valid+0x42/0x80
[ 5695.017351] Code: 08 48 83 c2 22 48 39 d0 74 24 48 8b 10 48 39 f2 75 2c 48 8b 51 08 b0 01 48 39 f2 75 34 c3 48 c7 c7 55 d7 78 82 e8 4e 45 3b 00 <0f> 0b eb 31 48 c7 c7 27 a8 70 82 e8 3e 45 3b 00 0f 0b eb 21 48 c7
[ 5695.054919] RSP: 0018:ffffc90027aef4f0 EFLAGS: 00010246
[ 5695.065366] RAX: 41fe484987275300 RBX: ffff888008988180 RCX: 0000000000000000
[ 5695.079636] RDX: ffff88886006c280 RSI: ffff888860060480 RDI: ffff888860060480
[ 5695.093904] RBP: 0000000000000002 R08: 0000000000000000 R09: ffffc90027aef370
[ 5695.108175] R10: 0000000000000000 R11: ffffffff82fdf1c0 R12: 0000000010000002
[ 5695.122447] R13: ffff888014b6a448 R14: ffff888014b6a420 R15: 00000000138dc240
[ 5695.136717] FS: 00007f23a7d3f740(0000) GS:ffff888860040000(0000) knlGS:0000000000000000
[ 5695.152899] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5695.164388] CR2: 0000560ceaab6ac0 CR3: 000000001c06c001 CR4: 00000000007706e0
[ 5695.178659] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 5695.192927] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 5695.207197] PKRU: 55555554
[ 5695.212602] Call Trace:
[ 5695.217486] <TASK>
[ 5695.221674] zs_map_object+0x91/0x270
[ 5695.229000] zswap_frontswap_store+0x33d/0x870
[ 5695.237885] ? do_raw_spin_lock+0x5d/0xa0
[ 5695.245899] __frontswap_store+0x51/0xb0
[ 5695.253742] swap_writepage+0x3c/0x60
[ 5695.261063] shrink_page_list+0x738/0x1230
[ 5695.269255] shrink_lruvec+0x5ec/0xcd0
[ 5695.276749] ? shrink_slab+0x187/0x5f0
[ 5695.284240] ? mem_cgroup_iter+0x6e/0x120
[ 5695.292255] shrink_node+0x293/0x7b0
[ 5695.299402] do_try_to_free_pages+0xea/0x550
[ 5695.307940] try_to_free_pages+0x19a/0x490
[ 5695.316126] __folio_alloc+0x19ff/0x3e40
[ 5695.323971] ? __filemap_get_folio+0x8a/0x4e0
[ 5695.332681] ? walk_component+0x2a8/0xb50
[ 5695.340697] ? generic_permission+0xda/0x2a0
[ 5695.349231] ? __filemap_get_folio+0x8a/0x4e0
[ 5695.357940] ? walk_component+0x2a8/0xb50
[ 5695.365955] vma_alloc_folio+0x10e/0x570
[ 5695.373796] ? walk_component+0x52/0xb50
[ 5695.381634] wp_page_copy+0x38c/0xc10
[ 5695.388953] ? filename_lookup+0x378/0xbc0
[ 5695.397140] handle_mm_fault+0x87f/0x1800
[ 5695.405157] do_user_addr_fault+0x1bd/0x570
[ 5695.413520] exc_page_fault+0x5d/0x110
[ 5695.421017] asm_exc_page_fault+0x22/0x30
After some investigation, I have found the following issue: unlike other
zswap backends, zsmalloc performs the LRU list update at the object
mapping time, rather than when the slot for the object is allocated.
This deviation was discussed and agreed upon during the review process
of the zsmalloc writeback patch series:
https://lore.kernel.org/lkml/Y3flcAXNxxrvy3ZH@cmpxchg.org/
Unfortunately, this introduces a subtle bug that occurs when there is a
concurrent store and reclaim, which interleave as follows:
zswap_frontswap_store() shrink_worker()
zs_malloc() zs_zpool_shrink()
spin_lock(&pool->lock) zs_reclaim_page()
zspage = find_get_zspage()
spin_unlock(&pool->lock)
spin_lock(&pool->lock)
zspage = list_first_entry(&pool->lru)
list_del(&zspage->lru)
zspage->lru.next = LIST_POISON1
zspage->lru.prev = LIST_POISON2
spin_unlock(&pool->lock)
zs_map_object()
spin_lock(&pool->lock)
if (!list_empty(&zspage->lru))
list_del(&zspage->lru)
CHECK_DATA_CORRUPTION(next == LIST_POISON1) /* BOOM */
With the current upstream code, this issue rarely happens. zswap only
triggers writeback when the pool is already full, at which point all
further store attempts are short-circuited. This creates an implicit
pseudo-serialization between reclaim and store. I am working on a new
zswap shrinking mechanism, which makes interleaving reclaim and store
more likely, exposing this bug.
zbud and z3fold do not have this problem, because they perform the LRU
list update in the alloc function, while still holding the pool's lock.
This patch fixes the aforementioned bug by moving the LRU update back to
zs_malloc(), analogous to zbud and z3fold.
Link: https://lkml.kernel.org/r/20230505185054.2417128-1-nphamcs@gmail.com
Fixes: 64f768c6b32e ("zsmalloc: add a LRU to zs_pool to keep track of zspages in LRU order")
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When something registers and unregisters many shrinkers, such as:
for x in $(seq 10000); do unshare -Ui true; done
Sometimes the following error is printed to the kernel log:
debugfs: Directory '...' with parent 'shrinker' already present!
This occurs since commit badc28d4924b ("mm: shrinkers: fix deadlock in
shrinker debugfs") / v6.2: Since the call to `debugfs_remove_recursive`
was moved outside the `shrinker_rwsem`/`shrinker_mutex` lock, but the call
to `ida_free` stayed inside, a newly registered shrinker can be
re-assigned that ID and attempt to create the debugfs directory before the
directory from the previous shrinker has been removed.
The locking changes in commit f95bdb700bc6 ("mm: vmscan: make global slab
shrink lockless") made the race condition more likely, though it existed
before then.
Commit badc28d4924b ("mm: shrinkers: fix deadlock in shrinker debugfs")
could be reverted since the issue is addressed should no longer occur
since the count and scan operations are lockless since commit 20cd1892fcc3
("mm: shrinkers: make count and scan in shrinker debugfs lockless").
However, since this is a contended lock, prefer instead moving `ida_free`
outside the lock to avoid the race.
Link: https://lkml.kernel.org/r/20230503013232.299211-1-joanbrugueram@gmail.com
Fixes: badc28d4924b ("mm: shrinkers: fix deadlock in shrinker debugfs")
Signed-off-by: Joan Bruguera Micó <joanbrugueram@gmail.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull dmapool updates - again - from Andrew Morton:
"Reinstate the dmapool changes which were accidentally removed by a
mishap on the last commit in the previous attempt at the series"
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup").
[ The whole old series: def8574308ed..2d55c16c0c54 results in an empty
diff because that last commit ended up being just a revert of all that
came everything before it. - Linus ]
* tag 'mm-stable-2023-05-06-10-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
dmapool: link blocks across pages
dmapool: don't memset on free twice
dmapool: simplify freeing
dmapool: consolidate page initialization
dmapool: rearrange page alloc failure handling
dmapool: move debug code to own functions
dmapool: speedup DMAPOOL_DEBUG with init_on_alloc
dmapool: cleanup integer types
dmapool: use sysfs_emit() instead of scnprintf()
dmapool: remove checks for dev == NULL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Five hotfixes.
Three are cc:stable, two pertain to merge window changes"
* tag 'mm-hotfixes-stable-2023-05-06-10-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
afs: fix the afs_dir_get_folio return value
nilfs2: do not write dirty data after degenerating to read-only
mm: do not reclaim private data from pinned page
nilfs2: fix infinite loop in nilfs_mdt_get_block()
mm/mmap/vma_merge: always check invariants
|
|
The allocated dmapool pages are never freed for the lifetime of the pool.
There is no need for the two level list+stack lookup for finding a free
block since nothing is ever removed from the list. Just use a simple
stack, reducing time complexity to constant.
The implementation inserts the stack linking elements and the dma handle
of the block within itself when freed. This means the smallest possible
dmapool block is increased to at most 16 bytes to accommodate these
fields, but there are no exisiting users requesting a dma pool smaller
than that anyway.
Removing the list has a significant change in performance. Using the
kernel's micro-benchmarking self test:
Before:
# modprobe dmapool_test
dmapool test: size:16 blocks:8192 time:57282
dmapool test: size:64 blocks:8192 time:172562
dmapool test: size:256 blocks:8192 time:789247
dmapool test: size:1024 blocks:2048 time:371823
dmapool test: size:4096 blocks:1024 time:362237
After:
# modprobe dmapool_test
dmapool test: size:16 blocks:8192 time:24997
dmapool test: size:64 blocks:8192 time:26584
dmapool test: size:256 blocks:8192 time:33542
dmapool test: size:1024 blocks:2048 time:9022
dmapool test: size:4096 blocks:1024 time:6045
The module test allocates quite a few blocks that may not accurately
represent how these pools are used in real life. For a more marco level
benchmark, running fio high-depth + high-batched on nvme, this patch shows
submission and completion latency reduced by ~100usec each, 1% IOPs
improvement, and perf record's time spent in dma_pool_alloc/free were
reduced by half.
[kbusch@kernel.org: push new blocks in ascending order]
Link: https://lkml.kernel.org/r/20230221165400.1595247-1-kbusch@meta.com
Link: https://lkml.kernel.org/r/20230126215125.4069751-12-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If debug is enabled, dmapool will poison the range, so no need to clear it
to 0 immediately before writing over it.
Link: https://lkml.kernel.org/r/20230126215125.4069751-11-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The actions for busy and not busy are mostly the same, so combine these
and remove the unnecessary function. Also, the pool is about to be freed
so there's no need to poison the page data since we only check for poison
on alloc, which can't be done on a freed pool.
Link: https://lkml.kernel.org/r/20230126215125.4069751-10-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Various fields of the dma pool are set in different places. Move it all
to one function.
Link: https://lkml.kernel.org/r/20230126215125.4069751-9-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Handle the error in a condition so the good path can be in the normal
flow.
Link: https://lkml.kernel.org/r/20230126215125.4069751-8-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Clean up the normal path by moving the debug code outside it.
Link: https://lkml.kernel.org/r/20230126215125.4069751-7-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Avoid double-memset of the same allocated memory in dma_pool_alloc() when
both DMAPOOL_DEBUG is enabled and init_on_alloc=1.
Link: https://lkml.kernel.org/r/20230126215125.4069751-6-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
To represent the size of a single allocation, dmapool currently uses
'unsigned int' in some places and 'size_t' in other places. Standardize
on 'unsigned int' to reduce overhead, but use 'size_t' when counting all
the blocks in the entire pool.
Link: https://lkml.kernel.org/r/20230126215125.4069751-5-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use sysfs_emit instead of scnprintf, snprintf or sprintf.
Link: https://lkml.kernel.org/r/20230126215125.4069751-4-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
dmapool originally tried to support pools without a device because
dma_alloc_coherent() supports allocations without a device. But nobody
ended up using dma pools without a device, and trying to do so will result
in an oops. So remove the checks for pool->dev == NULL since they are
unneeded bloat.
[kbusch@kernel.org: add check for null dev on create]
Link: https://lkml.kernel.org/r/20230126215125.4069751-3-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If the page is pinned, there's no point in trying to reclaim it.
Furthermore if the page is from the page cache we don't want to reclaim
fs-private data from the page because the pinning process may be writing
to the page at any time and reclaiming fs private info on a dirty page can
upset the filesystem (see link below).
Link: https://lore.kernel.org/linux-mm/20180103100430.GE4911@quack2.suse.cz
Link: https://lkml.kernel.org/r/20230428124140.30166-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We may still have inconsistent input parameters even if we choose not to
merge and the vma_merge() invariant checks are useful for checking this
with no production runtime cost (these are only relevant when
CONFIG_DEBUG_VM is specified).
Therefore, perform these checks regardless of whether we merge.
This is relevant, as a recent issue (addressed in commit "mm/mempolicy:
Correctly update prev when policy is equal on mbind") in the mbind logic
was only picked up in the 6.2.y stable branch where these assertions are
performed prior to determining mergeability.
Had this remained the same in mainline this issue may have been picked up
faster, so moving forward let's always check them.
Link: https://lkml.kernel.org/r/df548a6ae3fa135eec3b446eb3dae8eb4227da97.1682885809.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Smatch reports that filemap_fault() was missed in the conversion of
__filemap_get_folio() error returns from NULL to ERR_PTR.
Fixes: 66dabbb65d67 ("mm: return an ERR_PTR from __filemap_get_folio")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Reported-by: syzbot+48011b86c8ea329af1b9@syzkaller.appspotmail.com
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge my x86 uaccess updates branch.
The LAM ("Linear Address Masking") updates in this release made me
unhappy about how "access_ok()" was done, and it actually turned out to
have a couple of small bugs in it too. This is my cleanup of the code:
- use the sign bit of the __user pointer rather than masking the
address and checking it against the TASK_SIZE range.
We already did this part for the get/put_user() side, but
'access_ok()' did the naïve "mask and range check" thing, which not
only generates nasty code, but also ended up meaning that __access_ok
itself didn't do a good job, and so copy_from_user_nmi() didn't get
the check right.
- move all the code that is 64-bit only into the 64-bit version of the
header file, so that we don't unnecessarily pollute the shared x86
code and make it look like LAM might work in 32-bit too.
- fix a bug in the address masking (that doesn't end up mattering: in
this case the fix was to just remove the buggy code entirely).
- a couple of trivial cleanups and added commentary about the
access_ok() rules.
* x86-uaccess-cleanup:
x86-64: mm: clarify the 'positive addresses' user address rules
x86: mm: remove 'sign' games from LAM untagged_addr*() macros
x86: uaccess: move 32-bit and 64-bit parts into proper <asm/uaccess_N.h> header
x86: mm: remove architecture-specific 'access_ok()' define
x86-64: make access_ok() independent of LAM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hitfixes from Andrew Morton:
"Five hotfixes. Three are cc:stable, two for this -rc cycle"
* tag 'mm-hotfixes-stable-2023-05-03-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: change per-VMA lock statistics to be disabled by default
MAINTAINERS: update Michal Simek's email
mm/mempolicy: correctly update prev when policy is equal on mbind
relayfs: fix out-of-bounds access in relay_file_read
kasan: hw_tags: avoid invalid virt_to_page()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- Some DAMON cleanups from Kefeng Wang
- Some KSM work from David Hildenbrand, to make the PR_SET_MEMORY_MERGE
ioctl's behavior more similar to KSM's behavior.
[ Andrew called these "final", but I suspect we'll have a series fixing
up the fact that the last commit in the dmapools series in the
previous pull seems to have unintentionally just reverted all the
other commits in the same series.. - Linus ]
* tag 'mm-stable-2023-05-03-16-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: hwpoison: coredump: support recovery from dump_user_range()
mm/page_alloc: add some comments to explain the possible hole in __pageblock_pfn_to_page()
mm/ksm: move disabling KSM from s390/gmap code to KSM code
selftests/ksm: ksm_functional_tests: add prctl unmerge test
mm/ksm: unmerge and clear VM_MERGEABLE when setting PR_SET_MEMORY_MERGE=0
mm/damon/paddr: fix missing folio_sz update in damon_pa_young()
mm/damon/paddr: minor refactor of damon_pa_mark_accessed_or_deactivate()
mm/damon/paddr: minor refactor of damon_pa_pageout()
|
|
The linear address masking (LAM) code made access_ok() more complicated,
in that it now needs to untag the address in order to verify the access
range. See commit 74c228d20a51 ("x86/uaccess: Provide untagged_addr()
and remove tags before address check").
We were able to avoid that overhead in the get_user/put_user code paths
by simply using the sign bit for the address check, and depending on the
GP fault if the address was non-canonical, which made it all independent
of LAM.
And we can do the same thing for access_ok(): simply check that the user
pointer range has the high bit clear. No need to bother with any
address bit masking.
In fact, we can go a bit further, and just check the starting address
for known small accesses ranges: any accesses that overflow will still
be in the non-canonical area and will still GP fault.
To still make syzkaller catch any potentially unchecked user addresses,
we'll continue to warn about GP faults that are caused by accesses in
the non-canonical range. But we'll limit that to purely "high bit set
and past the one-page 'slop' area".
We could probably just do that "check only starting address" for any
arbitrary range size: realistically all kernel accesses to user space
will be done starting at the low address. But let's leave that kind of
optimization for later. As it is, this already allows us to generate
simpler code and not worry about any tag bits in the address.
The one thing to look out for is the GUP address check: instead of
actually copying data in the virtual address range (and thus bad
addresses being caught by the GP fault), GUP will look up the page
tables manually. As a result, the page table limits need to be checked,
and that was previously implicitly done by the access_ok().
With the relaxed access_ok() check, we need to just do an explicit check
for TASK_SIZE_MAX in the GUP code instead. The GUP code already needs
to do the tag bit unmasking anyway, so there this is all very
straightforward, and there are no LAM issues.
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Change CONFIG_PER_VMA_LOCK_STATS to be disabled by default, as most users
don't need it. Add configuration help to clarify its usage.
Link: https://lkml.kernel.org/r/20230428173533.18158-1-surenb@google.com
Fixes: 52f238653e45 ("mm: introduce per-VMA lock statistics")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The refactoring in commit f4e9e0e69468 ("mm/mempolicy: fix use-after-free
of VMA iterator") introduces a subtle bug which arises when attempting to
apply a new NUMA policy across a range of VMAs in mbind_range().
The refactoring passes a **prev pointer to keep track of the previous VMA
in order to reduce duplication, and in all but one case it keeps this
correctly updated.
The bug arises when a VMA within the specified range has an equivalent
policy as determined by mpol_equal() - which unlike other cases, does not
update prev.
This can result in a situation where, later in the iteration, a VMA is
found whose policy does need to change. At this point, vma_merge() is
invoked with prev pointing to a VMA which is before the previous VMA.
Since vma_merge() discovers the curr VMA by looking for the one
immediately after prev, it will now be in a situation where this VMA is
incorrect and the merge will not proceed correctly.
This is checked in the VM_WARN_ON() invariant case with end >
curr->vm_end, which, if a merge is possible, results in a warning (if
CONFIG_DEBUG_VM is specified).
I note that vma_merge() performs these invariant checks only after
merge_prev/merge_next are checked, which is debatable as it hides this
issue if no merge is possible even though a buggy situation has arisen.
The solution is simply to update the prev pointer even when policies are
equal.
This caused a bug to arise in the 6.2.y stable tree, and this patch
resolves this bug.
Link: https://lkml.kernel.org/r/83f1d612acb519d777bebf7f3359317c4e7f4265.1682866629.git.lstoakes@gmail.com
Fixes: f4e9e0e69468 ("mm/mempolicy: fix use-after-free of VMA iterator")
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202304292203.44ddeff6-oliver.sang@intel.com
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When booting with 'kasan.vmalloc=off', a kernel configured with support
for KASAN_HW_TAGS will explode at boot time due to bogus use of
virt_to_page() on a vmalloc adddress. With CONFIG_DEBUG_VIRTUAL selected
this will be reported explicitly, and with or without CONFIG_DEBUG_VIRTUAL
the kernel will dereference a bogus address:
| ------------[ cut here ]------------
| virt_to_phys used for non-linear address: (____ptrval____) (0xffff800008000000)
| WARNING: CPU: 0 PID: 0 at arch/arm64/mm/physaddr.c:15 __virt_to_phys+0x78/0x80
| Modules linked in:
| CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.3.0-rc3-00073-g83865133300d-dirty #4
| Hardware name: linux,dummy-virt (DT)
| pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : __virt_to_phys+0x78/0x80
| lr : __virt_to_phys+0x78/0x80
| sp : ffffcd076afd3c80
| x29: ffffcd076afd3c80 x28: 0068000000000f07 x27: ffff800008000000
| x26: fffffbfff0000000 x25: fffffbffff000000 x24: ff00000000000000
| x23: ffffcd076ad3c000 x22: fffffc0000000000 x21: ffff800008000000
| x20: ffff800008004000 x19: ffff800008000000 x18: ffff800008004000
| x17: 666678302820295f x16: ffffffffffffffff x15: 0000000000000004
| x14: ffffcd076b009e88 x13: 0000000000000fff x12: 0000000000000003
| x11: 00000000ffffefff x10: c0000000ffffefff x9 : 0000000000000000
| x8 : 0000000000000000 x7 : 205d303030303030 x6 : 302e30202020205b
| x5 : ffffcd076b41d63f x4 : ffffcd076afd3827 x3 : 0000000000000000
| x2 : 0000000000000000 x1 : ffffcd076afd3a30 x0 : 000000000000004f
| Call trace:
| __virt_to_phys+0x78/0x80
| __kasan_unpoison_vmalloc+0xd4/0x478
| __vmalloc_node_range+0x77c/0x7b8
| __vmalloc_node+0x54/0x64
| init_IRQ+0x94/0xc8
| start_kernel+0x194/0x420
| __primary_switched+0xbc/0xc4
| ---[ end trace 0000000000000000 ]---
| Unable to handle kernel paging request at virtual address 03fffacbe27b8000
| Mem abort info:
| ESR = 0x0000000096000004
| EC = 0x25: DABT (current EL), IL = 32 bits
| SET = 0, FnV = 0
| EA = 0, S1PTW = 0
| FSC = 0x04: level 0 translation fault
| Data abort info:
| ISV = 0, ISS = 0x00000004
| CM = 0, WnR = 0
| swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041bc5000
| [03fffacbe27b8000] pgd=0000000000000000, p4d=0000000000000000
| Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
| Modules linked in:
| CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 6.3.0-rc3-00073-g83865133300d-dirty #4
| Hardware name: linux,dummy-virt (DT)
| pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : __kasan_unpoison_vmalloc+0xe4/0x478
| lr : __kasan_unpoison_vmalloc+0xd4/0x478
| sp : ffffcd076afd3ca0
| x29: ffffcd076afd3ca0 x28: 0068000000000f07 x27: ffff800008000000
| x26: 0000000000000000 x25: 03fffacbe27b8000 x24: ff00000000000000
| x23: ffffcd076ad3c000 x22: fffffc0000000000 x21: ffff800008000000
| x20: ffff800008004000 x19: ffff800008000000 x18: ffff800008004000
| x17: 666678302820295f x16: ffffffffffffffff x15: 0000000000000004
| x14: ffffcd076b009e88 x13: 0000000000000fff x12: 0000000000000001
| x11: 0000800008000000 x10: ffff800008000000 x9 : ffffb2f8dee00000
| x8 : 000ffffb2f8dee00 x7 : 205d303030303030 x6 : 302e30202020205b
| x5 : ffffcd076b41d63f x4 : ffffcd076afd3827 x3 : 0000000000000000
| x2 : 0000000000000000 x1 : ffffcd076afd3a30 x0 : ffffb2f8dee00000
| Call trace:
| __kasan_unpoison_vmalloc+0xe4/0x478
| __vmalloc_node_range+0x77c/0x7b8
| __vmalloc_node+0x54/0x64
| init_IRQ+0x94/0xc8
| start_kernel+0x194/0x420
| __primary_switched+0xbc/0xc4
| Code: d34cfc08 aa1f03fa 8b081b39 d503201f (f9400328)
| ---[ end trace 0000000000000000 ]---
| Kernel panic - not syncing: Attempted to kill the idle task!
This is because init_vmalloc_pages() erroneously calls virt_to_page() on
a vmalloc address, while virt_to_page() is only valid for addresses in
the linear/direct map. Since init_vmalloc_pages() expects virtual
addresses in the vmalloc range, it must use vmalloc_to_page() rather
than virt_to_page().
We call init_vmalloc_pages() from __kasan_unpoison_vmalloc(), where we
check !is_vmalloc_or_module_addr(), suggesting that we might encounter a
non-vmalloc address. Luckily, this never happens. By design, we only
call __kasan_unpoison_vmalloc() on pointers in the vmalloc area, and I
have verified that we don't violate that expectation. Given that,
is_vmalloc_or_module_addr() must always be true for any legitimate
argument to __kasan_unpoison_vmalloc().
Correct init_vmalloc_pages() to use vmalloc_to_page(), and remove the
redundant and misleading use of is_vmalloc_or_module_addr() in
__kasan_unpoison_vmalloc().
Link: https://lkml.kernel.org/r/20230418164212.1775741-1-mark.rutland@arm.com
Fixes: 6c2f761dad7851d8 ("kasan: fix zeroing vmalloc memory with HW_TAGS")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
__pageblock_pfn_to_page()
Now the __pageblock_pfn_to_page() is used by set_zone_contiguous(), which
checks whether the given zone contains holes, and uses
pfn_to_online_page() to validate if the start pfn is online and valid, as
well as using pfn_valid() to validate the end pfn.
However, the __pageblock_pfn_to_page() function may return non-NULL even
if the end pfn of a pageblock is in a memory hole in some situations. For
example, if the pageblock order is MAX_ORDER, which will fall into 2
sub-sections, and the end pfn of the pageblock may be hole even though the
start pfn is online and valid.
See below memory layout as an example and suppose the pageblock order is
MAX_ORDER.
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x0000001fa7ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x0000001fa3c7ffff]
[ 0.000000] node 0: [mem 0x0000001fa3c80000-0x0000001fa3ffffff]
[ 0.000000] node 0: [mem 0x0000001fa4000000-0x0000001fa402ffff]
[ 0.000000] node 0: [mem 0x0000001fa4030000-0x0000001fa40effff]
[ 0.000000] node 0: [mem 0x0000001fa40f0000-0x0000001fa73cffff]
[ 0.000000] node 0: [mem 0x0000001fa73d0000-0x0000001fa745ffff]
[ 0.000000] node 0: [mem 0x0000001fa7460000-0x0000001fa746ffff]
[ 0.000000] node 0: [mem 0x0000001fa7470000-0x0000001fa758ffff]
[ 0.000000] node 0: [mem 0x0000001fa7590000-0x0000001fa7dfffff]
Focus on the last memory range, and there is a hole for the range [mem
0x0000001fa7590000-0x0000001fa7dfffff]. That means the last pageblock
will contain the range from 0x1fa7c00000 to 0x1fa7ffffff, since the
pageblock must be 4M aligned. And in this pageblock, these pfns will fall
into 2 sub-section (the sub-section size is 2M aligned).
So, the 1st sub-section (indicates pfn range: 0x1fa7c00000 - 0x1fa7dfffff
) in this pageblock is valid by calling subsection_map_init() in
free_area_init(), but the 2nd sub-section (indicates pfn range:
0x1fa7e00000 - 0x1fa7ffffff ) in this pageblock is not valid.
This did not break anything until now, but the zone continuous is fragile
in this possible scenario. So as previous discussion[1], it is better to
add some comments to explain this possible issue in case there are some
future pfn walkers that rely on this.
[1] https://lore.kernel.org/all/87r0sdsmr6.fsf@yhuang6-desk2.ccr.corp.intel.com/
Link: https://lkml.kernel.org/r/5c26368865e79c743a453dea48d30670b19d2e4f.1682425534.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/5c26368865e79c743a453dea48d30670b19d2e4f.1682425534.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's factor out actual disabling of KSM. The existing "mm->def_flags &=
~VM_MERGEABLE;" was essentially a NOP and can be dropped, because
def_flags should never include VM_MERGEABLE. Note that we don't currently
prevent re-enabling KSM.
This should now be faster in case KSM was never enabled, because we only
conditionally iterate all VMAs. Further, it certainly looks cleaner.
Link: https://lkml.kernel.org/r/20230422210156.33630-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Stefan Roesch <shr@devkernel.io>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/ksm: improve PR_SET_MEMORY_MERGE=0 handling and cleanup
disabling KSM", v2.
(1) Make PR_SET_MEMORY_MERGE=0 unmerge pages like setting MADV_UNMERGEABLE
does, (2) add a selftest for it and (3) factor out disabling of KSM from
s390/gmap code.
This patch (of 3):
Let's unmerge any KSM pages when setting PR_SET_MEMORY_MERGE=0, and clear
the VM_MERGEABLE flag from all VMAs -- just like KSM would. Of course,
only do that if we previously set PR_SET_MEMORY_MERGE=1.
Link: https://lkml.kernel.org/r/20230422205420.30372-1-david@redhat.com
Link: https://lkml.kernel.org/r/20230422205420.30372-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Stefan Roesch <shr@devkernel.io>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The *folio_sz in damon_pa_young() will be used(as last_folio_sz) by
__damon_pa_check_access(), so it's need to be updated, fix missing branch.
Link: https://lkml.kernel.org/r/20230308083311.120951-4-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Omit one line by unified folio_put(), and make code more clear.
Link: https://lkml.kernel.org/r/20230308083311.120951-3-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/damon/paddr: minor code improvement", v3.
Unify folio_put() to make code more clear, and also fix minor issue in
damon_pa_young().
This patch (of 3):
Omit three lines by unified folio_put(), and make code more clear.
Link: https://lkml.kernel.org/r/20230308083311.120951-1-wangkefeng.wang@huawei.com
Link: https://lkml.kernel.org/r/20230308083311.120951-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Convert to platform remove callback returning void
- Extend changing default domain to normal group
- Intel VT-d updates:
- Remove VT-d virtual command interface and IOASID
- Allow the VT-d driver to support non-PRI IOPF
- Remove PASID supervisor request support
- Various small and misc cleanups
- ARM SMMU updates:
- Device-tree binding updates:
* Allow Qualcomm GPU SMMUs to accept relevant clock properties
* Document Qualcomm 8550 SoC as implementing an MMU-500
* Favour new "qcom,smmu-500" binding for Adreno SMMUs
- Fix S2CR quirk detection on non-architectural Qualcomm SMMU
implementations
- Acknowledge SMMUv3 PRI queue overflow when consuming events
- Document (in a comment) why ATS is disabled for bypass streams
- AMD IOMMU updates:
- 5-level page-table support
- NUMA awareness for memory allocations
- Unisoc driver: Support for reattaching an existing domain
- Rockchip driver: Add missing set_platform_dma_ops callback
- Mediatek driver: Adjust the dma-ranges
- Various other small fixes and cleanups
* tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (82 commits)
iommu: Remove iommu_group_get_by_id()
iommu: Make iommu_release_device() static
iommu/vt-d: Remove BUG_ON in dmar_insert_dev_scope()
iommu/vt-d: Remove a useless BUG_ON(dev->is_virtfn)
iommu/vt-d: Remove BUG_ON in map/unmap()
iommu/vt-d: Remove BUG_ON when domain->pgd is NULL
iommu/vt-d: Remove BUG_ON in handling iotlb cache invalidation
iommu/vt-d: Remove BUG_ON on checking valid pfn range
iommu/vt-d: Make size of operands same in bitwise operations
iommu/vt-d: Remove PASID supervisor request support
iommu/vt-d: Use non-privileged mode for all PASIDs
iommu/vt-d: Remove extern from function prototypes
iommu/vt-d: Do not use GFP_ATOMIC when not needed
iommu/vt-d: Remove unnecessary checks in iopf disabling path
iommu/vt-d: Move PRI handling to IOPF feature path
iommu/vt-d: Move pfsid and ats_qdep calculation to device probe path
iommu/vt-d: Move iopf code from SVA to IOPF enabling path
iommu/vt-d: Allow SVA with device-specific IOPF
dmaengine: idxd: Add enable/disable device IOPF feature
arm64: dts: mt8186: Add dma-ranges for the parent "soc" node
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cpuset changes including the fix for an incorrect interaction with
CPU hotplug and an optimization
- Other doc and cosmetic changes
* tag 'cgroup-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
docs: cgroup-v1/cpusets: update libcgroup project link
cgroup/cpuset: Minor updates to test_cpuset_prs.sh
cgroup/cpuset: Include offline CPUs when tasks' cpumasks in top_cpuset are updated
cgroup/cpuset: Skip task update if hotplug doesn't affect current cpuset
cpuset: Clean up cpuset_node_allowed
cgroup: bpf: use cgroup_lock()/cgroup_unlock() wrappers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 LAM (Linear Address Ma |
