summaryrefslogtreecommitdiff
path: root/net/sunrpc/cache.c
AgeCommit message (Collapse)AuthorFilesLines
2025-03-10sunrpc: clean cache_detail immediately when flush is written frequentlyLi Lingfeng1-1/+5
We will write /proc/net/rpc/xxx/flush if we want to clean cache_detail. This updates nextcheck to the current time and calls cache_flush --> cache_clean to clean cache_detail. If we write this interface again within one second, it will only increase flush_time and nextcheck without actually cleaning cache_detail. Therefore, if we keep writing this interface repeatedly within one second, flush_time and nextcheck will keep increasing, even far exceeding the current time, making it impossible to clear cache_detail through the flush interface or cache_cleaner. If someone frequently calls the flush interface, we should immediately clean the corresponding cache_detail instead of continuously accumulating nextcheck. Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2025-02-25sunrpc: suppress warnings for unused procfs functionsArnd Bergmann1-7/+3
There is a warning about unused variables when building with W=1 and no procfs: net/sunrpc/cache.c:1660:30: error: 'cache_flush_proc_ops' defined but not used [-Werror=unused-const-variable=] 1660 | static const struct proc_ops cache_flush_proc_ops = { | ^~~~~~~~~~~~~~~~~~~~ net/sunrpc/cache.c:1622:30: error: 'content_proc_ops' defined but not used [-Werror=unused-const-variable=] 1622 | static const struct proc_ops content_proc_ops = { | ^~~~~~~~~~~~~~~~ net/sunrpc/cache.c:1598:30: error: 'cache_channel_proc_ops' defined but not used [-Werror=unused-const-variable=] 1598 | static const struct proc_ops cache_channel_proc_ops = { | ^~~~~~~~~~~~~~~~~~~~~~ These are used inside of an #ifdef, so replacing that with an IS_ENABLED() check lets the compiler see how they are used while still dropping them during dead code elimination. Fixes: dbf847ecb631 ("knfsd: allow cache_register to return error on failure") Reviewed-by: Jeff Layton <jlayton@kernel.org> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
2025-01-06SUNRPC: no need get cache ref when protected by rcuYang Erkun1-9/+3
rcu_read_lock/rcu_read_unlock has already provide protection for the pointer we will reference when we call c_show. Therefore, there is no need to obtain a cache reference to help protect cache_head. Additionally, the .put such as expkey_put/svc_export_put will invoke dput, which can sleep and break rcu. Stop get cache reference to fix them all. Fixes: ae74136b4bb6 ("SUNRPC: Allow cache lookups to use RCU protection rather than the r/w spinlock") Suggested-by: NeilBrown <neilb@suse.de> Signed-off-by: Yang Erkun <yangerkun@huawei.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2025-01-06SUNRPC: introduce cache_check_rcu to help check in rcu contextYang Erkun1-15/+26
This is a prepare patch to add cache_check_rcu, will use it with follow patch. Suggested-by: NeilBrown <neilb@suse.de> Signed-off-by: Yang Erkun <yangerkun@huawei.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2024-11-18SUNRPC: make sure cache entry active before cache_showYang Erkun1-1/+3
The function `c_show` was called with protection from RCU. This only ensures that `cp` will not be freed. Therefore, the reference count for `cp` can drop to zero, which will trigger a refcount use-after-free warning when `cache_get` is called. To resolve this issue, use `cache_get_rcu` to ensure that `cp` remains active. ------------[ cut here ]------------ refcount_t: addition on 0; use-after-free. WARNING: CPU: 7 PID: 822 at lib/refcount.c:25 refcount_warn_saturate+0xb1/0x120 CPU: 7 UID: 0 PID: 822 Comm: cat Not tainted 6.12.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:refcount_warn_saturate+0xb1/0x120 Call Trace: <TASK> c_show+0x2fc/0x380 [sunrpc] seq_read_iter+0x589/0x770 seq_read+0x1e5/0x270 proc_reg_read+0xe1/0x140 vfs_read+0x125/0x530 ksys_read+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Yang Erkun <yangerkun@huawei.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2024-09-27[tree-wide] finally take no_llseek outAl Viro1-4/+0
no_llseek had been defined to NULL two years ago, in commit 868941b14441 ("fs: remove no_llseek") To quote that commit, At -rc1 we'll need do a mechanical removal of no_llseek - git grep -l -w no_llseek | grep -v porting.rst | while read i; do sed -i '/\<no_llseek\>/d' $i done would do it. Unfortunately, that hadn't been done. Linus, could you do that now, so that we could finally put that thing to rest? All instances are of the form .llseek = no_llseek, so it's obviously safe. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-09-23net/sunrpc: make use of the helper macro LIST_HEAD()Hongbo Li1-7/+3
list_head can be initialized automatically with LIST_HEAD() instead of calling INIT_LIST_HEAD(). Here we can simplify the code. Signed-off-by: Hongbo Li <lihongbo22@huawei.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
2022-11-18treewide: use get_random_u32_below() instead of deprecated functionJason A. Donenfeld1-1/+1
This is a simple mechanical transformation done by: @@ expression E; @@ - prandom_u32_max + get_random_u32_below (E) Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Reviewed-by: SeongJae Park <sj@kernel.org> # for damon Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use prandom_u32_max() when possible, part 1Jason A. Donenfeld1-1/+1
Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: KP Singh <kpsingh@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-05-19SUNRPC: Cache deferral injectionChuck Lever1-1/+17
Cache deferral injection stress-tests the cache deferral logic as well as upper layer protocol deferred request handlers. This facility is for developers and professional testers to ensure coverage of the rqst deferral code paths. To date, we haven't had an adequate way to ensure these code paths are covered during testing, short of temporary code changes to force their use. A file called /sys/kernel/debug/fail_sunrpc/ignore-cache-wait enables administrators to disable cache deferral injection while allowing other types of sunrpc errors to be injected. The default setting is that cache deferral injection is enabled (ignore=false). To enable support for cache deferral injection, CONFIG_FAULT_INJECTION, CONFIG_FAULT_INJECTION_DEBUG_FS, and CONFIG_SUNRPC_DEBUG must all be set to "Y". Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2022-01-22proc: remove PDE_DATA() completelyMuchun Song1-12/+12
Remove PDE_DATA() completely and replace it with pde_data(). [akpm@linux-foundation.org: fix naming clash in drivers/nubus/proc.c] [akpm@linux-foundation.org: now fix it properly] Link: https://lkml.kernel.org/r/20211124081956.87711-2-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alexey Gladkov <gladkov.alexey@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03SUNRPC: improve error response to over-size gss credentialNeilBrown1-1/+1
When the NFS server receives a large gss (kerberos) credential and tries to pass it up to rpc.svcgssd (which is deprecated), it triggers an infinite loop in cache_read(). cache_request() always returns -EAGAIN, and this causes a "goto again". This patch: - changes the error to -E2BIG to avoid the infinite loop, and - generates a WARN_ONCE when rsi_request first sees an over-sized credential. The warning suggests switching to gssproxy. Link: https://bugzilla.kernel.org/show_bug.cgi?id=196583 Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-12-09sunrpc: clean-up cache downcallRoberto Bergantinos Corpas1-30/+11
We can simplify code around cache_downcall unifying memory allocations using kvmalloc. This has the benefit of getting rid of cache_slow_downcall (and queue_io_mutex), and also matches userland allocation size and limits. Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-10-20sunrpc: raise kernel RPC channel buffer sizeRoberto Bergantinos Corpas1-1/+1
Its possible that using AUTH_SYS and mountd manage-gids option a user may hit the 8k RPC channel buffer limit. This have been observed on field, causing unanswered RPCs on clients after mountd fails to write on channel : rpc.mountd[11231]: auth_unix_gid: error writing reply Userland nfs-utils uses a buffer size of 32k (RPC_CHAN_BUF_SIZE), so lets match those two. Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-09-25sunrpc: simplify do_cache_cleanJ. Bruce Fields1-7/+8
Is it just me, or is the logic written in a slightly convoluted way? I find it a little easier to read this way. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-09-25sunrpc: cache : Replace seq_printf with seq_putsXu Wang1-2/+2
seq_puts is a lot cheaper than seq_printf, so use that to print literal strings. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-04-13SUNRPC/cache: Fix unsafe traverse caused double-free in cache_purgeYihao Wu1-2/+3
Deleting list entry within hlist_for_each_entry_safe is not safe unless next pointer (tmp) is protected too. It's not, because once hash_lock is released, cache_clean may delete the entry that tmp points to. Then cache_purge can walk to a deleted entry and tries to double free it. Fix this bug by holding only the deleted entry's reference. Suggested-by: NeilBrown <neilb@suse.de> Signed-off-by: Yihao Wu <wuyihao@linux.alibaba.com> Reviewed-by: NeilBrown <neilb@suse.de> [ cel: removed unused variable ] Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-03-16sunrpc: Add tracing for cache eventsTrond Myklebust1-9/+27
Add basic tracing for debugging the sunrpc cache events. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-03-16SUNRPC/cache: Allow garbage collection of invalid cache entriesTrond Myklebust1-17/+19
If the cache entry never gets initialised, we want the garbage collector to be able to evict it. Otherwise if the upcall daemon fails to initialise the entry, we end up never expiring it. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> [ cel: resolved a merge conflict ] Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-03-16nfsd: export upcalls must not return ESTALE when mountd is downTrond Myklebust1-27/+26
If the rpc.mountd daemon goes down, then that should not cause all exports to start failing with ESTALE errors. Let's explicitly distinguish between the cache upcall cases that need to time out, and those that do not. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-03-16sunrpc: Pass lockdep expression to RCU listsAmol Grover1-1/+2
detail->hash_table[] is traversed using hlist_for_each_entry_rcu outside an RCU read-side critical section but under the protection of detail->hash_lock. Hence, add corresponding lockdep expression to silence false-positive warnings, and harden RCU lists. Signed-off-by: Amol Grover <frextrite@gmail.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-02-07Merge tag 'nfsd-5.6' of git://linux-nfs.org/~bfields/linuxLinus Torvalds1-22/+26
Pull nfsd updates from Bruce Fields: "Highlights: - Server-to-server copy code from Olga. To use it, client and both servers must have support, the target server must be able to access the source server over NFSv4.2, and the target server must have the inter_copy_offload_enable module parameter set. - Improvements and bugfixes for the new filehandle cache, especially in the container case, from Trond - Also from Trond, better reporting of write errors. - Y2038 work from Arnd" * tag 'nfsd-5.6' of git://linux-nfs.org/~bfields/linux: (55 commits) sunrpc: expiry_time should be seconds not timeval nfsd: make nfsd_filecache_wq variable static nfsd4: fix double free in nfsd4_do_async_copy() nfsd: convert file cache to use over/underflow safe refcount nfsd: Define the file access mode enum for tracing nfsd: Fix a perf warning nfsd: Ensure sampling of the write verifier is atomic with the write nfsd: Ensure sampling of the commit verifier is atomic with the commit sunrpc: clean up cache entry add/remove from hashtable sunrpc: Fix potential leaks in sunrpc_cache_unhash() nfsd: Ensure exclusion between CLONE and WRITE errors nfsd: Pass the nfsd_file as arguments to nfsd4_clone_file_range() nfsd: Update the boot verifier on stable writes too. nfsd: Fix stable writes nfsd: Allow nfsd_vfs_write() to take the nfsd_file as an argument nfsd: Fix a soft lockup race in nfsd_file_mark_find_or_create() nfsd: Reduce the number of calls to nfsd_file_gc() nfsd: Schedule the laundrette regularly irrespective of file errors nfsd: Remove unused constant NFSD_FILE_LRU_RESCAN nfsd: Containerise filecache laundrette ...
2020-02-04proc: convert everything to "struct proc_ops"Alexey Dobriyan1-23/+22
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in seq_file.h. Conversion rule is: llseek => proc_lseek unlocked_ioctl => proc_ioctl xxx => proc_xxx delete ".owner = THIS_MODULE" line [akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c] [sfr@canb.auug.org.au: fix kernel/sched/psi.c] Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-22sunrpc: clean up cache entry add/remove from hashtableTrond Myklebust1-24/+26
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-01-22sunrpc: Fix potential leaks in sunrpc_cache_unhash()Trond Myklebust1-0/+2
When we unhash the cache entry, we need to handle any pending upcalls by calling cache_fresh_unlocked(). Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-12-18nfs: use time64_t internallyArnd Bergmann1-8/+8
The timestamps for the cache are all in boottime seconds, so they don't overflow 32-bit values, but the use of time_t is deprecated because it generally does overflow when used with wall-clock time. There are multiple possible ways of avoiding it: - leave time_t, which is safe here, but forces others to look into this code to determine that it is over and over. - use a more generic type, like 'int' or 'long', which is known to be sufficient here but loses the documentation of referring to timestamps - use ktime_t everywhere, and convert into seconds in the few places where we want realtime-seconds. The conversion is sometimes expensive, but not more so than the conversion we do today. - use time64_t to clarify that this code is safe. Nothing would change for 64-bit architectures, but it is slightly less efficient on 32-bit architectures. Without a clear winner of the three approaches above, this picks the last one, favouring readability over a small performance loss on 32-bit architectures. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-10-11sunrpc: fix crash when cache_head become valid before updatePavel Tikhomirov1-6/+0
I was investigating a crash in our Virtuozzo7 kernel which happened in in svcauth_unix_set_client. I found out that we access m_client field in ip_map structure, which was received from sunrpc_cache_lookup (we have a bit older kernel, now the code is in sunrpc_cache_add_entry), and these field looks uninitialized (m_client == 0x74 don't look like a pointer) but in the cache_head in flags we see 0x1 which is CACHE_VALID. It looks like the problem appeared from our previous fix to sunrpc (1): commit 4ecd55ea0742 ("sunrpc: fix cache_head leak due to queued request") And we've also found a patch already fixing our patch (2): commit d58431eacb22 ("sunrpc: don't mark uninitialised items as VALID.") Though the crash is eliminated, I think the core of the problem is not completely fixed: Neil in the patch (2) makes cache_head CACHE_NEGATIVE, before cache_fresh_locked which was added in (1) to fix crash. These way cache_is_valid won't say the cache is valid anymore and in svcauth_unix_set_client the function cache_check will return error instead of 0, and we don't count entry as initialized. But it looks like we need to remove cache_fresh_locked completely in sunrpc_cache_lookup: In (1) we've only wanted to make cache_fresh_unlocked->cache_dequeue so that cache_requests with no readers also release corresponding cache_head, to fix their leak. We with Vasily were not sure if cache_fresh_locked and cache_fresh_unlocked should be used in pair or not, so we've guessed to use them in pair. Now we see that we don't want the CACHE_VALID bit set here by cache_fresh_locked, as "valid" means "initialized" and there is no initialization in sunrpc_cache_add_entry. Both expiry_time and last_refresh are not used in cache_fresh_unlocked code-path and also not required for the initial fix. So to conclude cache_fresh_locked was called by mistake, and we can just safely remove it instead of crutching it with CACHE_NEGATIVE. It looks ideologically better for me. Hope I don't miss something here. Here is our crash backtrace: [13108726.326291] BUG: unable to handle kernel NULL pointer dereference at 0000000000000074 [13108726.326365] IP: [<ffffffffc01f79eb>] svcauth_unix_set_client+0x2ab/0x520 [sunrpc] [13108726.326448] PGD 0 [13108726.326468] Oops: 0002 [#1] SMP [13108726.326497] Modules linked in: nbd isofs xfs loop kpatch_cumulative_81_0_r1(O) xt_physdev nfnetlink_queue bluetooth rfkill ip6table_nat nf_nat_ipv6 ip_vs_wrr ip_vs_wlc ip_vs_sh nf_conntrack_netlink ip_vs_sed ip_vs_pe_sip nf_conntrack_sip ip_vs_nq ip_vs_lc ip_vs_lblcr ip_vs_lblc ip_vs_ftp ip_vs_dh nf_nat_ftp nf_conntrack_ftp iptable_raw xt_recent nf_log_ipv6 xt_hl ip6t_rt nf_log_ipv4 nf_log_common xt_LOG xt_limit xt_TCPMSS xt_tcpmss vxlan ip6_udp_tunnel udp_tunnel xt_statistic xt_NFLOG nfnetlink_log dummy xt_mark xt_REDIRECT nf_nat_redirect raw_diag udp_diag tcp_diag inet_diag netlink_diag af_packet_diag unix_diag rpcsec_gss_krb5 xt_addrtype ip6t_rpfilter ipt_REJECT nf_reject_ipv4 ip6t_REJECT nf_reject_ipv6 ebtable_nat ebtable_broute nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_mangle ip6table_raw nfsv4 [13108726.327173] dns_resolver cls_u32 binfmt_misc arptable_filter arp_tables ip6table_filter ip6_tables devlink fuse_kio_pcs ipt_MASQUERADE nf_nat_masquerade_ipv4 xt_nat iptable_nat nf_nat_ipv4 xt_comment nf_conntrack_ipv4 nf_defrag_ipv4 xt_wdog_tmo xt_multiport bonding xt_set xt_conntrack iptable_filter iptable_mangle kpatch(O) ebtable_filter ebt_among ebtables ip_set_hash_ip ip_set nfnetlink vfat fat skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass fuse pcspkr ses enclosure joydev sg mei_me hpwdt hpilo lpc_ich mei ipmi_si shpchp ipmi_devintf ipmi_msghandler xt_ipvs acpi_power_meter ip_vs_rr nfsv3 nfsd auth_rpcgss nfs_acl nfs lockd grace fscache nf_nat cls_fw sch_htb sch_cbq sch_sfq ip_vs em_u32 nf_conntrack tun br_netfilter veth overlay ip6_vzprivnet ip6_vznetstat ip_vznetstat [13108726.327817] ip_vzprivnet vziolimit vzevent vzlist vzstat vznetstat vznetdev vzmon vzdev bridge pio_kaio pio_nfs pio_direct pfmt_raw pfmt_ploop1 ploop ip_tables ext4 mbcache jbd2 sd_mod crc_t10dif crct10dif_generic mgag200 i2c_algo_bit drm_kms_helper scsi_transport_iscsi 8021q syscopyarea sysfillrect garp sysimgblt fb_sys_fops mrp stp ttm llc bnx2x crct10dif_pclmul crct10dif_common crc32_pclmul crc32c_intel drm dm_multipath ghash_clmulni_intel uas aesni_intel lrw gf128mul glue_helper ablk_helper cryptd tg3 smartpqi scsi_transport_sas mdio libcrc32c i2c_core usb_storage ptp pps_core wmi sunrpc dm_mirror dm_region_hash dm_log dm_mod [last unloaded: kpatch_cumulative_82_0_r1] [13108726.328403] CPU: 35 PID: 63742 Comm: nfsd ve: 51332 Kdump: loaded Tainted: G W O ------------ 3.10.0-862.20.2.vz7.73.29 #1 73.29 [13108726.328491] Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 10/02/2018 [13108726.328554] task: ffffa0a6a41b1160 ti: ffffa0c2a74bc000 task.ti: ffffa0c2a74bc000 [13108726.328610] RIP: 0010:[<ffffffffc01f79eb>] [<ffffffffc01f79eb>] svcauth_unix_set_client+0x2ab/0x520 [sunrpc] [13108726.328706] RSP: 0018:ffffa0c2a74bfd80 EFLAGS: 00010246 [13108726.328750] RAX: 0000000000000001 RBX: ffffa0a6183ae000 RCX: 0000000000000000 [13108726.328811] RDX: 0000000000000074 RSI: 0000000000000286 RDI: ffffa0c2a74bfcf0 [13108726.328864] RBP: ffffa0c2a74bfe00 R08: ffffa0bab8c22960 R09: 0000000000000001 [13108726.328916] R10: 0000000000000001 R11: 0000000000000001 R12: ffffa0a32aa7f000 [13108726.328969] R13: ffffa0a6183afac0 R14: ffffa0c233d88d00 R15: ffffa0c2a74bfdb4 [13108726.329022] FS: 0000000000000000(0000) GS:ffffa0e17f9c0000(0000) knlGS:0000000000000000 [13108726.329081] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [13108726.332311] CR2: 0000000000000074 CR3: 00000026a1b28000 CR4: 00000000007607e0 [13108726.334606] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [13108726.336754] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [13108726.338908] PKRU: 00000000 [13108726.341047] Call Trace: [13108726.343074] [<ffffffff8a2c78b4>] ? groups_alloc+0x34/0x110 [13108726.344837] [<ffffffffc01f5eb4>] svc_set_client+0x24/0x30 [sunrpc] [13108726.346631] [<ffffffffc01f2ac1>] svc_process_common+0x241/0x710 [sunrpc] [13108726.348332] [<ffffffffc01f3093>] svc_process+0x103/0x190 [sunrpc] [13108726.350016] [<ffffffffc07d605f>] nfsd+0xdf/0x150 [nfsd] [13108726.351735] [<ffffffffc07d5f80>] ? nfsd_destroy+0x80/0x80 [nfsd] [13108726.353459] [<ffffffff8a2bf741>] kthread+0xd1/0xe0 [13108726.355195] [<ffffffff8a2bf670>] ? create_kthread+0x60/0x60 [13108726.356896] [<ffffffff8a9556dd>] ret_from_fork_nospec_begin+0x7/0x21 [13108726.358577] [<ffffffff8a2bf670>] ? create_kthread+0x60/0x60 [13108726.360240] Code: 4c 8b 45 98 0f 8e 2e 01 00 00 83 f8 fe 0f 84 76 fe ff ff 85 c0 0f 85 2b 01 00 00 49 8b 50 40 b8 01 00 00 00 48 89 93 d0 1a 00 00 <f0> 0f c1 02 83 c0 01 83 f8 01 0f 8e 53 02 00 00 49 8b 44 24 38 [13108726.363769] RIP [<ffffffffc01f79eb>] svcauth_unix_set_client+0x2ab/0x520 [sunrpc] [13108726.365530] RSP <ffffa0c2a74bfd80> [13108726.367179] CR2: 0000000000000074 Fixes: d58431eacb22 ("sunrpc: don't mark uninitialised items as VALID.") Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-19sunrpc: add a new cache_detail operation for when a cache is flushedJeff Layton1-0/+3
When the exports table is changed, exportfs will usually write a new time to the "flush" file in the nfsd.export cache procfile. This tells the kernel to flush any entries that are older than that value. This gives us a mechanism to tell whether an unexport might have occurred. Add a new ->flush cache_detail operation that is called after flushing the cache whenever someone writes to a "flush" file. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-07-30SUNRPC: Track writers of the 'channel' file to improve cache_listeners_existDave Wysochanski1-4/+8
The sunrpc cache interface is susceptible to being fooled by a rogue process just reading a 'channel' file. If this happens the kernel may think a valid daemon exists to service the cache when it does not. For example, the following may fool the kernel: cat /proc/net/rpc/auth.unix.gid/channel Change the tracking of readers to writers when considering whether a listener exists as all valid daemon processes either open a channel file O_RDWR or O_WRONLY. While this does not prevent a rogue process from "stealing" a message from the kernel, it does at least improve the kernels perception of whether a valid process servicing the cache exists. Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-07-10Merge tag 'nfsd-5.3' of git://linux-nfs.org/~bfields/linuxLinus Torvalds1-1/+0
Pull nfsd updates from Bruce Fields: "Highlights: - Add a new /proc/fs/nfsd/clients/ directory which exposes some long-requested information about NFSv4 clients (like open files) and allows forced revocation of client state. - Replace the global duplicate reply cache by a cache per network namespace; previously, a request in one network namespace could incorrectly match an entry from another, though we haven't seen this in production. This is the last remaining container bug that I'm aware of; at this point you should be able to run separate nfsd's in each network namespace, each with their own set of exports, and everything should work. - Cleanup and modify lock code to show the pid of lockd as the owner of NLM locks. This is the correct version of the bugfix originally attempted in b8eee0e90f97 ("lockd: Show pid of lockd for remote locks")" * tag 'nfsd-5.3' of git://linux-nfs.org/~bfields/linux: (34 commits) nfsd: Make __get_nfsdfs_client() static nfsd: Make two functions static nfsd: Fix misuse of strlcpy sunrpc/cache: remove the exporting of cache_seq_next nfsd: decode implementation id nfsd: create xdr_netobj_dup helper nfsd: allow forced expiration of NFSv4 clients nfsd: create get_nfsdfs_clp helper nfsd4: show layout stateids nfsd: show lock and deleg stateids nfsd4: add file to display list of client's opens nfsd: add more information to client info file nfsd: escape high characters in binary data nfsd: copy client's address including port number to cl_addr nfsd4: add a client info file nfsd: make client/ directory names small ints nfsd: add nfsd/clients directory nfsd4: use reference count to free client nfsd: rename cl_refcount nfsd: persist nfsd filesystem across mounts ...
2019-07-08sunrpc/cache: remove the exporting of cache_seq_nextDenis Efremov1-1/+0
The function cache_seq_next is declared static and marked EXPORT_SYMBOL_GPL, which is at best an odd combination. Because the function is not used outside of the net/sunrpc/cache.c file it is defined in, this commit removes the EXPORT_SYMBOL_GPL() marking. Fixes: d48cf356a130 ("SUNRPC: Remove non-RCU protected lookup") Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 363Thomas Gleixner1-3/+1
Based on 1 normalized pattern(s): released under terms in gpl version 2 see copying extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 5 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531081035.689962394@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-24sunrpc/cache: handle missing listeners better.NeilBrown1-1/+3
If no handler (such as rpc.mountd) has opened a cache 'channel', the sunrpc cache responds to all lookup requests with -ENOENT. This is particularly important for the auth.unix.gid cache which is optional. If the channel was open briefly and an upcall was written to it, this upcall remains pending even when the handler closes the channel. When an upcall is pending, the code currently doesn't check if there are still listeners, it only performs that check before sending an upcall. As the cache treads a recently closes channel (closed less than 30 seconds ago) as "potentially still open", there is a reasonable sized window when a request can become pending in a closed channel, and thereby block lookups indefinitely. This can easily be demonstrated by running cat /proc/net/rpc/auth.unix.gid/channel and then trying to mount an NFS filesystem from this host. It will block indefinitely (unless mountd is run with --manage-gids, or krb5 is used). When cache_check() finds that an upcall is pending, it should perform the "cache_listeners_exist()" exist test. If no listeners do exist, the request should be negated. With this change in place, there can still be a 30second wait on mount, until the cache gives up waiting for a handler to come back, but this is much better than an indefinite wait. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-04-05sunrpc: don't mark uninitialised items as VALID.NeilBrown1-0/+3
A recent commit added a call to cache_fresh_locked() when an expired item was found. The call sets the CACHE_VALID flag, so it is important that the item actually is valid. There are two ways it could be valid: 1/ If ->update has been called to fill in relevant content 2/ if CACHE_NEGATIVE is set, to say that content doesn't exist. An expired item that is waiting for an update will be neither. Setting CACHE_VALID will mean that a subsequent call to cache_put() will be likely to dereference uninitialised pointers. So we must make sure the item is valid, and we already have code to do that in try_to_negate_entry(). This takes the hash lock and so cannot be used directly, so take out the two lines that we need and use them. Now cache_fresh_locked() is certain to be called only on a valid item. Cc: stable@kernel.org # 2.6.35 Fixes: 4ecd55ea0742 ("sunrpc: fix cache_head leak due to queued request") Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-12-04sunrpc: fix cache_head leak due to queued requestVasily Averin1-1/+9
After commit d202cce8963d, an expired cache_head can be removed from the cache_detail's hash. However, the expired cache_head may be waiting for a reply from a previously submitted request. Such a cache_head has an increased refcounter and therefore it won't be freed after cache_put(freeme). Because the cache_head was removed from the hash it cannot be found during cache_clean() and can be leaked forever, together with stalled cache_request and other taken resources. In our case we noticed it because an entry in the export cache was holding a reference on a filesystem. Fixes d202cce8963d ("sunrpc: never return expired entries in sunrpc_cache_lookup") Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Cc: stable@kernel.org # 2.6.35 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-10-29SUNRPC: Replace the cache_detail->hash_lock with a regular spinlockTrond Myklebust1-23/+23
Now that the reader functions are all RCU protected, use a regular spinlock rather than a reader/writer lock. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-10-29SUNRPC: Remove non-RCU protected lookupTrond Myklebust1-57/+4
Clean up the cache code by removing the non-RCU protected lookup. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-10-29SUNRPC: Allow cache lookups to use RCU protection rather than the r/w spinlockTrond Myklebust1-14/+79
Instead of the reader/writer spinlock, allow cache lookups to use RCU for looking up entries. This is more efficient since modifications can occur while other entries are being looked up. Note that for now, we keep the reader/writer spinlock until all users have been converted to use RCU-safe freeing of their cache entries. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-10-03SUNRPC: Refactor sunrpc_cache_lookupTrond Myklebust1-8/+25
This is a trivial split into lookup and insert functions, no change in behavior. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-05Merge tag 'nfsd-4.17' of git://linux-nfs.org/~bfields/linuxLinus Torvalds1-16/+16
Pull nfsd updates from Bruce Fields: "Chuck Lever did a bunch of work on nfsd tracepoints, on RDMA, and on server xdr decoding (with an eye towards eliminating a data copy in the RDMA case). I did some refactoring of the delegation code in preparation for eliminating some delegation self-conflicts and implementing write delegations" * tag 'nfsd-4.17' of git://linux-nfs.org/~bfields/linux: (40 commits) nfsd: fix incorrect umasks sunrpc: remove incorrect HMAC request initialization NFSD: Clean up legacy NFS SYMLINK argument XDR decoders NFSD: Clean up legacy NFS WRITE argument XDR decoders nfsd: Trace NFSv4 COMPOUND execution nfsd: Add I/O trace points in the NFSv4 read proc nfsd: Add I/O trace points in the NFSv4 write path nfsd: Add "nfsd_" to trace point names nfsd: Record request byte count, not count of vectors nfsd: Fix NFSD trace points svc: Report xprt dequeue latency sunrpc: Report per-RPC execution stats sunrpc: Re-purpose trace_svc_process sunrpc: Save remote presentation address in svc_xprt for trace events sunrpc: Simplify trace_svc_recv sunrpc: Simplify do_enqueue tracing sunrpc: Move trace_svc_xprt_dequeue() sunrpc: Update show_svc_xprt_flags() to include recently added flags svc: Simplify ->xpo_secure_port sunrpc: Remove unneeded pointer dereference ...
2018-03-26net: Use octal not symbolic permissionsJoe Perches1-5/+5