| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Given existing entry:
ORIGIN: a:b -> c:d
REPLY: c:d -> a:b
And colliding entry:
ORIGIN: c:d -> a:b
REPLY: a:b -> c:d
The colliding ct (and the associated skb) get dropped on insert.
Permit this by checking if the colliding entry matches the reply
direction.
Happens when both ends send packets at same time, both requests are picked
up as NEW, rather than NEW for the 'first' and 'ESTABLISHED' for the
second packet.
This is an esoteric condition, as ruleset must permit NEW connections
in either direction and both peers must already have a bidirectional
traffic flow at the time conntrack gets enabled.
Allow the 'reverse' skb to pass and assign the existing (clashing)
entry.
While at it, also drop the extra 'dying' check, this is already
tested earlier by the calling function.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
A conntrack entry can be inserted to the connection tracking table if there
is no existing entry with an identical tuple in either direction.
Example:
INITIATOR -> NAT/PAT -> RESPONDER
Initiator passes through NAT/PAT ("us") and SNAT is done (saddr rewrite).
Then, later, NAT/PAT machine itself also wants to connect to RESPONDER.
This will not work if the SNAT done earlier has same IP:PORT source pair.
Conntrack table has:
ORIGINAL: $IP_INITATOR:$SPORT -> $IP_RESPONDER:$DPORT
REPLY: $IP_RESPONDER:$DPORT -> $IP_NAT:$SPORT
and new locally originating connection wants:
ORIGINAL: $IP_NAT:$SPORT -> $IP_RESPONDER:$DPORT
REPLY: $IP_RESPONDER:$DPORT -> $IP_NAT:$SPORT
This is handled by the NAT engine which will do a source port reallocation
for the locally originating connection that is colliding with an existing
tuple by attempting a source port rewrite.
This is done even if this new connection attempt did not go through a
masquerade/snat rule.
There is a rare race condition with connection-less protocols like UDP,
where we do the port reallocation even though its not needed.
This happens when new packets from the same, pre-existing flow are received
in both directions at the exact same time on different CPUs after the
conntrack table was flushed (or conntrack becomes active for first time).
With strict ordering/single cpu, the first packet creates new ct entry and
second packet is resolved as established reply packet.
With parallel processing, both packets are picked up as new and both get
their own ct entry.
In this case, the 'reply' packet (picked up as ORIGINAL) can be mangled by
NAT engine because a port collision is detected.
This change isn't enough to prevent a packet drop later during
nf_conntrack_confirm(), the existing clash resolution strategy will not
detect such reverse clash case. This is resolved by a followup patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When the driver needs to send new packets to the device, it always
queues the new sk_buffs into an intermediate queue (send_pkt_queue)
and schedules a worker (send_pkt_work) to then queue them into the
virtqueue exposed to the device.
This increases the chance of batching, but also introduces a lot of
latency into the communication. So we can optimize this path by
adding a fast path to be taken when there is no element in the
intermediate queue, there is space available in the virtqueue,
and no other process that is sending packets (tx_lock held).
The following benchmarks were run to check improvements in latency and
throughput. The test bed is a host with Intel i7-10700KF CPU @ 3.80GHz
and L1 guest running on QEMU/KVM with vhost process and all vCPUs
pinned individually to pCPUs.
- Latency
Tool: Fio version 3.37-56
Mode: pingpong (h-g-h)
Test runs: 50
Runtime-per-test: 50s
Type: SOCK_STREAM
In the following fio benchmark (pingpong mode) the host sends
a payload to the guest and waits for the same payload back.
fio process pinned both inside the host and the guest system.
Before: Linux 6.9.8
Payload 64B:
1st perc. overall 99th perc.
Before 12.91 16.78 42.24 us
After 9.77 13.57 39.17 us
Payload 512B:
1st perc. overall 99th perc.
Before 13.35 17.35 41.52 us
After 10.25 14.11 39.58 us
Payload 4K:
1st perc. overall 99th perc.
Before 14.71 19.87 41.52 us
After 10.51 14.96 40.81 us
- Throughput
Tool: iperf-vsock
The size represents the buffer length (-l) to read/write
P represents the number of parallel streams
P=1
4K 64K 128K
Before 6.87 29.3 29.5 Gb/s
After 10.5 39.4 39.9 Gb/s
P=2
4K 64K 128K
Before 10.5 32.8 33.2 Gb/s
After 17.8 47.7 48.5 Gb/s
P=4
4K 64K 128K
Before 12.7 33.6 34.2 Gb/s
After 16.9 48.1 50.5 Gb/s
The performance improvement is related to this optimization,
I used a ebpf kretprobe on virtio_transport_send_skb to check
that each packet was sent directly to the virtqueue
Co-developed-by: Marco Pinna <marco.pinn95@gmail.com>
Signed-off-by: Marco Pinna <marco.pinn95@gmail.com>
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Message-Id: <20240730-pinna-v4-2-5c9179164db5@outlook.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
Preliminary patch to introduce an optimization to the
enqueue system.
All the code used to enqueue a packet into the virtqueue
is removed from virtio_transport_send_pkt_work()
and moved to the new virtio_transport_send_skb() function.
Co-developed-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Marco Pinna <marco.pinn95@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20240730-pinna-v4-1-5c9179164db5@outlook.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Pull NFS client updates from Anna Schumaker:
"New Features:
- Add a 'noalignwrite' mount option for lock-less 'lost writes' prevention
- Add support for the LOCALIO protocol extention
Bugfixes:
- Fix memory leak in error path of nfs4_do_reclaim()
- Simplify and guarantee lock owner uniqueness
- Fix -Wformat-truncation warning
- Fix folio refcounts by using folio_attach_private()
- Fix failing the mount system call when the server is down
- Fix detection of "Proxying of Times" server support
Cleanups:
- Annotate struct nfs_cache_array with __counted_by()
- Remove unnecessary NULL checks before kfree()
- Convert RPC_TASK_* constants to an enum
- Remove obsolete or misleading comments and declerations"
* tag 'nfs-for-6.12-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (41 commits)
nfs: Fix `make htmldocs` warnings in the localio documentation
nfs: add "NFS Client and Server Interlock" section to localio.rst
nfs: add FAQ section to Documentation/filesystems/nfs/localio.rst
nfs: add Documentation/filesystems/nfs/localio.rst
nfs: implement client support for NFS_LOCALIO_PROGRAM
nfs/localio: use dedicated workqueues for filesystem read and write
pnfs/flexfiles: enable localio support
nfs: enable localio for non-pNFS IO
nfs: add LOCALIO support
nfs: pass struct nfsd_file to nfs_init_pgio and nfs_init_commit
nfsd: implement server support for NFS_LOCALIO_PROGRAM
nfsd: add LOCALIO support
nfs_common: prepare for the NFS client to use nfsd_file for LOCALIO
nfs_common: add NFS LOCALIO auxiliary protocol enablement
SUNRPC: replace program list with program array
SUNRPC: add svcauth_map_clnt_to_svc_cred_local
SUNRPC: remove call_allocate() BUG_ONs
nfsd: add nfsd_serv_try_get and nfsd_serv_put
nfsd: add nfsd_file_acquire_local()
nfsd: factor out __fh_verify to allow NULL rqstp to be passed
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf 'struct fd' updates from Alexei Starovoitov:
"This includes struct_fd BPF changes from Al and Andrii"
* tag 'bpf-next-6.12-struct-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
bpf: convert bpf_token_create() to CLASS(fd, ...)
security,bpf: constify struct path in bpf_token_create() LSM hook
bpf: more trivial fdget() conversions
bpf: trivial conversions for fdget()
bpf: switch maps to CLASS(fd, ...)
bpf: factor out fetching bpf_map from FD and adding it to used_maps list
bpf: switch fdget_raw() uses to CLASS(fd_raw, ...)
bpf: convert __bpf_prog_get() to CLASS(fd, ...)
|
|
In the `mac802154_scan_worker` function, the `scan_req->type` field was
accessed after the RCU read-side critical section was unlocked. According
to RCU usage rules, this is illegal and can lead to unpredictable
behavior, such as accessing memory that has been updated or causing
use-after-free issues.
This possible bug was identified using a static analysis tool developed
by myself, specifically designed to detect RCU-related issues.
To address this, the `scan_req->type` value is now stored in a local
variable `scan_req_type` while still within the RCU read-side critical
section. The `scan_req_type` is then used after the RCU lock is released,
ensuring that the type value is safely accessed without violating RCU
rules.
Fixes: e2c3e6f53a7a ("mac802154: Handle active scanning")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawei Ye <jiawei.ye@foxmail.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/tencent_3B2F4F2B4DA30FAE2F51A9634A16B3AD4908@qq.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
When broadcasting data to multiple nodes via MHI, using skb_clone()
causes all nodes to receive the same header data. This can result in
packets being discarded by endpoints, leading to lost data.
This issue occurs when a socket is closed, and a QRTR_TYPE_DEL_CLIENT
packet is broadcasted. All nodes receive the same destination node ID,
causing the node connected to the client to discard the packet and
remain unaware of the client's deletion.
Replace skb_clone() with pskb_copy(), to create a separate copy of
the header for each sk_buff.
Fixes: bdabad3e363d ("net: Add Qualcomm IPC router")
Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com>
Reviewed-by: Jeffery Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Link: https://patch.msgid.link/20240916170858.2382247-1-quic_yabdulra@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
xfrm_net still contained the no-longer-used inexact policy list heads,
remove them.
Fixes: a54ad727f745 ("xfrm: policy: remove remaining use of inexact list")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
A service created with svc_create_pooled() can be given a linked list of
programs and all of these will be served.
Using a linked list makes it cumbersome when there are several programs
that can be optionally selected with CONFIG settings.
After this patch is applied, API consumers must use only
svc_create_pooled() when creating an RPC service that listens for more
than one RPC program.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Add new funtion svcauth_map_clnt_to_svc_cred_local which maps a
generic cred to a svc_cred suitable for use in nfsd.
This is needed by the localio code to map nfs client creds to nfs
server credentials.
Following from net/sunrpc/auth_unix.c:unx_marshal() it is clear that
->fsuid and ->fsgid must be used (rather than ->uid and ->gid). In
addition, these uid and gid must be translated with from_kuid_munged()
so local client uses correct uid and gid when acting as local server.
Jeff Layton noted:
This is where the magic happens. Since we're working in
kuid_t/kgid_t, we don't need to worry about further idmapping.
Suggested-by: NeilBrown <neilb@suse.de> # to approximate unx_marshal()
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Co-developed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Remove BUG_ON if p_arglen=0 to allow RPC with void arg.
Remove BUG_ON if p_replen=0 to allow RPC with void return.
The former was needed for the first revision of the LOCALIO protocol
which had an RPC that took a void arg:
/* raw RFC 9562 UUID */
typedef u8 uuid_t<UUID_SIZE>;
program NFS_LOCALIO_PROGRAM {
version LOCALIO_V1 {
void
NULL(void) = 0;
uuid_t
GETUUID(void) = 1;
} = 1;
} = 400122;
The latter is needed for the final revision of the LOCALIO protocol
which has a UUID_IS_LOCAL RPC which returns a void:
/* raw RFC 9562 UUID */
typedef u8 uuid_t<UUID_SIZE>;
program NFS_LOCALIO_PROGRAM {
version LOCALIO_V1 {
void
NULL(void) = 0;
void
UUID_IS_LOCAL(uuid_t) = 1;
} = 1;
} = 400122;
There is really no value in triggering a BUG_ON in response to either
of these previously unsupported conditions.
NeilBrown would like the entire 'if (proc->p_proc != 0)' branch
removed (not just the one BUG_ON that must be removed for LOCALIO's
immediate needs of returning void).
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
list_head can be initialized automatically with LIST_HEAD()
instead of calling INIT_LIST_HEAD(). Here we can simplify
the code.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
destroy_wait doesn't store all RPC clients. There was a list named
"all_clients" above it, which got moved to struct sunrpc_net in 2012,
but the comment was never removed.
Fixes: 70abc49b4f4a ("SUNRPC: make SUNPRC clients list per network namespace context")
Signed-off-by: Siddh Raman Pant <siddh.raman.pant@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Increase size of the servername array to avoid truncated output warning.
net/sunrpc/clnt.c:582:75: error：‘%s’ directive output may be truncated
writing up to 107 bytes into a region of size 48
[-Werror=format-truncation=]
582 | snprintf(servername, sizeof(servername), "%s",
| ^~
net/sunrpc/clnt.c:582:33: note:‘snprintf’ output
between 1 and 108 bytes into a destination of size 48
582 | snprintf(servername, sizeof(servername), "%s",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
583 | sun->sun_path);
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Suggested-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Pull nfsd updates from Chuck Lever:
"Notable features of this release include:
- Pre-requisites for automatically determining the RPC server thread
count
- Clean-up and preparation for supporting LOCALIO, which will be
merged via the NFS client tree
- Enhancements and fixes to NFSv4.2 COPY offload
- A new Python-based tool for generating kernel SunRPC XDR encoding
and decoding functions, added as an aid for prototyping features in
protocols based on the Linux kernel's SunRPC implementation
As always I am grateful to the NFSD contributors, reviewers, testers,
and bug reporters who participated during this cycle"
* tag 'nfsd-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (57 commits)
xdrgen: Prevent reordering of encoder and decoder functions
xdrgen: typedefs should use the built-in string and opaque functions
xdrgen: Fix return code checking in built-in XDR decoders
tools: Add xdrgen
nfsd: fix delegation_blocked() to block correctly for at least 30 seconds
nfsd: fix initial getattr on write delegation
nfsd: untangle code in nfsd4_deleg_getattr_conflict()
nfsd: enforce upper limit for namelen in __cld_pipe_inprogress_downcall()
nfsd: return -EINVAL when namelen is 0
NFSD: Wrap async copy operations with trace points
NFSD: Clean up extra whitespace in trace_nfsd_copy_done
NFSD: Record the callback stateid in copy tracepoints
NFSD: Display copy stateids with conventional print formatting
NFSD: Limit the number of concurrent async COPY operations
NFSD: Async COPY result needs to return a write verifier
nfsd: avoid races with wake_up_var()
nfsd: use clear_and_wake_up_bit()
sunrpc: xprtrdma: Use ERR_CAST() to return
NFSD: Annotate struct pnfs_block_deviceaddr with __counted_by()
nfsd: call cache_put if xdr_reserve_space returns NULL
...
|
|
NFSD 6.12 Release Notes
Notable features of this release include:
- Pre-requisites for automatically determining the RPC server thread
count
- Clean-up and preparation for supporting LOCALIO, which will be
merged via the NFS client tree
- Enhancements and fixes to NFSv4.2 COPY offload
- A new Python-based tool for generating kernel SunRPC XDR encoding
and decoding functions, added as an aid for prototyping features
in protocols based on the Linux kernel's SunRPC implementation.
As always I am grateful to the NFSD contributors, reviewers,
testers, and bug reporters who participated during this cycle.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct fd' updates from Al Viro:
"Just the 'struct fd' layout change, with conversion to accessor
helpers"
* tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add struct fd constructors, get rid of __to_fd()
struct fd: representation change
introduce fd_file(), convert all accessors to it.
|
|
The series in the "fixes" tag added the ability to consider L4 attributes
in routing rules.
The dst lookup on the outer packet of encapsulated traffic in the xfrm
code was not adapted to this change, thus routing behavior that relies
on L4 information is not respected.
Pass the ip protocol information when performing dst lookups.
Fixes: a25724b05af0 ("Merge branch 'fib_rules-support-sport-dport-and-proto-match'")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Preparation for adding more fields to dst lookup functions without
changing their signatures.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
In the spirit of [1], avoid creating multiple slab caches with the same
name. Instead, add the dev_name into the mix.
[1]: https://lore.kernel.org/all/20240807090746.2146479-1-pedro.falcato@gmail.com/
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Reported-by: syzbot+3c5d43e97993e1fa612b@syzkaller.appspotmail.com
Message-ID: <20240807094725.2193423-1-pedro.falcato@gmail.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
The rpl sr tunnel code contains calls to dst_cache_*() which are
only present when the dst cache is built.
Select DST_CACHE to build the dst cache, similar to other kconfig
options in the same file.
Compiling the rpl sr tunnel without DST_CACHE will lead to linker
errors.
Fixes: a7a29f9c361f ("net: ipv6: add rpl sr tunnel")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Introduce '__attribute__((bpf_fastcall))' for helpers and kfuncs with
corresponding support in LLVM.
It is similar to existing 'no_caller_saved_registers' attribute in
GCC/LLVM with a provision for backward compatibility. It allows
compilers generate more efficient BPF code assuming the verifier or
JITs will inline or partially inline a helper/kfunc with such
attribute. bpf_cast_to_kern_ctx, bpf_rdonly_cast,
bpf_get_smp_processor_id are the first set of such helpers.
- Harden and extend ELF build ID parsing logic.
When called from sleepable context the relevants parts of ELF file
will be read to find and fetch .note.gnu.build-id information. Also
harden the logic to avoid TOCTOU, overflow, out-of-bounds problems.
- Improvements and fixes for sched-ext:
- Allow passing BPF iterators as kfunc arguments
- Make the pointer returned from iter_next method trusted
- Fix x86 JIT convergence issue due to growing/shrinking conditional
jumps in variable length encoding
- BPF_LSM related:
- Introduce few VFS kfuncs and consolidate them in
fs/bpf_fs_kfuncs.c
- Enforce correct range of return values from certain LSM hooks
- Disallow attaching to other LSM hooks
- Prerequisite work for upcoming Qdisc in BPF:
- Allow kptrs in program provided structs
- Support for gen_epilogue in verifier_ops
- Important fixes:
- Fix uprobe multi pid filter check
- Fix bpf_strtol and bpf_strtoul helpers
- Track equal scalars history on per-instruction level
- Fix tailcall hierarchy on x86 and arm64
- Fix signed division overflow to prevent INT_MIN/-1 trap on x86
- Fix get kernel stack in BPF progs attached to tracepoint:syscall
- Selftests:
- Add uprobe bench/stress tool
- Generate file dependencies to drastically improve re-build time
- Match JIT-ed and BPF asm with __xlated/__jited keywords
- Convert older tests to test_progs framework
- Add support for RISC-V
- Few fixes when BPF programs are compiled with GCC-BPF backend
(support for GCC-BPF in BPF CI is ongoing in parallel)
- Add traffic monitor
- Enable cross compile and musl libc
* tag 'bpf-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (260 commits)
btf: require pahole 1.21+ for DEBUG_INFO_BTF with default DWARF version
btf: move pahole check in scripts/link-vmlinux.sh to lib/Kconfig.debug
btf: remove redundant CONFIG_BPF test in scripts/link-vmlinux.sh
bpf: Call the missed kfree() when there is no special field in btf
bpf: Call the missed btf_record_free() when map creation fails
selftests/bpf: Add a test case to write mtu result into .rodata
selftests/bpf: Add a test case to write strtol result into .rodata
selftests/bpf: Rename ARG_PTR_TO_LONG test description
selftests/bpf: Fix ARG_PTR_TO_LONG {half-,}uninitialized test
bpf: Zero former ARG_PTR_TO_{LONG,INT} args in case of error
bpf: Improve check_raw_mode_ok test for MEM_UNINIT-tagged types
bpf: Fix helper writes to read-only maps
bpf: Remove truncation test in bpf_strtol and bpf_strtoul helpers
bpf: Fix bpf_strtol and bpf_strtoul helpers for 32bit
selftests/bpf: Add tests for sdiv/smod overflow cases
bpf: Fix a sdiv overflow issue
libbpf: Add bpf_object__token_fd accessor
docs/bpf: Add missing BPF program types to docs
docs/bpf: Add constant values for linkages
bpf: Use fake pt_regs when doing bpf syscall tracepoint tracing
...
|
|
Using ERR_CAST() is more reasonable and safer, When it is necessary
to convert the type of an error pointer and return it.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Synchronously wait for all disconnects to complete to ensure the
transports have divested all hardware resources before the
underlying RDMA device can safely be removed.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
If an svc thread needs to perform some initialisation that might fail,
it has no good way to handle the failure.
Before the thread can exit it must call svc_exit_thread(), but that
requires the service mutex to be held. The thread cannot simply take
the mutex as that could deadlock if there is a concurrent attempt to
shut down all threads (which is unlikely, but not impossible).
nfsd currently call svc_exit_thread() unprotected in the unlikely event
that unshare_fs_struct() fails.
We can clean this up by introducing svc_thread_init_status() by which an
svc thread can report whether initialisation has succeeded. If it has,
it continues normally into the action loop. If it has not,
svc_thread_init_status() immediately aborts the thread.
svc_start_kthread() waits for either of these to happen, and calls
svc_exit_thread() (under the mutex) if the thread aborted.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The only caller of svc_rqst_alloc() is svc_prepare_thread(). So merge
the one into the other and simplify.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
As documented in svc_xprt.c, sv_nrthreads is protected by the service
mutex, and it does not need ->sv_lock.
(->sv_lock is needed only for sv_permsocks, sv_tempsocks, and
sv_tmpcnt).
So remove the unnecessary locking.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
sp_nrthreads is only ever accessed under the service mutex
nlmsvc_mutex nfs_callback_mutex nfsd_mutex
so these is no need for it to be an atomic_t.
The fact that all code using it is single-threaded means that we can
simplify svc_pool_victim and remove the temporary elevation of
sp_nrthreads.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The locking required for svc_exit_thread() is not obvious, so document
it in a kdoc comment.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
syzbot reported that nf_reject_ip6_tcphdr_put() was possibly sending
garbage on the four reserved tcp bits (th->res1)
Use skb_put_zero() to clear the whole TCP header,
as done in nf_reject_ip_tcphdr_put()
BUG: KMSAN: uninit-value in nf_reject_ip6_tcphdr_put+0x688/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:255
nf_reject_ip6_tcphdr_put+0x688/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:255
nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344
nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48
expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline]
nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288
nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626
nf_hook include/linux/netfilter.h:269 [inline]
NF_HOOK include/linux/netfilter.h:312 [inline]
ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310
__netif_receive_skb_one_core net/core/dev.c:5661 [inline]
__netif_receive_skb+0x1da/0xa00 net/core/dev.c:5775
process_backlog+0x4ad/0xa50 net/core/dev.c:6108
__napi_poll+0xe7/0x980 net/core/dev.c:6772
napi_poll net/core/dev.c:6841 [inline]
net_rx_action+0xa5a/0x19b0 net/core/dev.c:6963
handle_softirqs+0x1ce/0x800 kernel/softirq.c:554
__do_softirq+0x14/0x1a kernel/softirq.c:588
do_softirq+0x9a/0x100 kernel/softirq.c:455
__local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:382
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:908 [inline]
__dev_queue_xmit+0x2692/0x5610 net/core/dev.c:4450
dev_queue_xmit include/linux/netdevice.h:3105 [inline]
neigh_resolve_output+0x9ca/0xae0 net/core/neighbour.c:1565
neigh_output include/net/neighbour.h:542 [inline]
ip6_finish_output2+0x2347/0x2ba0 net/ipv6/ip6_output.c:141
__ip6_finish_output net/ipv6/ip6_output.c:215 [inline]
ip6_finish_output+0xbb8/0x14b0 net/ipv6/ip6_output.c:226
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip6_output+0x356/0x620 net/ipv6/ip6_output.c:247
dst_output include/net/dst.h:450 [inline]
NF_HOOK include/linux/netfilter.h:314 [inline]
ip6_xmit+0x1ba6/0x25d0 net/ipv6/ip6_output.c:366
inet6_csk_xmit+0x442/0x530 net/ipv6/inet6_connection_sock.c:135
__tcp_transmit_skb+0x3b07/0x4880 net/ipv4/tcp_output.c:1466
tcp_transmit_skb net/ipv4/tcp_output.c:1484 [inline]
tcp_connect+0x35b6/0x7130 net/ipv4/tcp_output.c:4143
tcp_v6_connect+0x1bcc/0x1e40 net/ipv6/tcp_ipv6.c:333
__inet_stream_connect+0x2ef/0x1730 net/ipv4/af_inet.c:679
inet_stream_connect+0x6a/0xd0 net/ipv4/af_inet.c:750
__sys_connect_file net/socket.c:2061 [inline]
__sys_connect+0x606/0x690 net/socket.c:2078
__do_sys_connect net/socket.c:2088 [inline]
__se_sys_connect net/socket.c:2085 [inline]
__x64_sys_connect+0x91/0xe0 net/socket.c:2085
x64_sys_call+0x27a5/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:43
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was stored to memory at:
nf_reject_ip6_tcphdr_put+0x60c/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:249
nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344
nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48
expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline]
nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288
nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626
nf_hook include/linux/netfilter.h:269 [inline]
NF_HOOK include/linux/netfilter.h:312 [inline]
ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310
__netif_receive_skb_one_core net/core/dev.c:5661 [inline]
__netif_receive_skb+0x1da/0xa00 net/core/dev.c:5775
process_backlog+0x4ad/0xa50 net/core/dev.c:6108
__napi_poll+0xe7/0x980 net/core/dev.c:6772
napi_poll net/core/dev.c:6841 [inline]
net_rx_action+0xa5a/0x19b0 net/core/dev.c:6963
handle_softirqs+0x1ce/0x800 kernel/softirq.c:554
__do_softirq+0x14/0x1a kernel/softirq.c:588
Uninit was stored to memory at:
nf_reject_ip6_tcphdr_put+0x2ca/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:231
nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344
nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48
expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline]
nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288
nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626
nf_hook include/linux/netfilter.h:269 [inline]
NF_HOOK include/linux/netfilter.h:312 [inline]
ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310
__netif_receive_skb_one_core net/core/dev.c:5661 [inline]
__netif_receive_skb+0x1da/0xa00 net/core/dev.c:5775
process_backlog+0x4ad/0xa50 net/core/dev.c:6108
__napi_poll+0xe7/0x980 net/core/dev.c:6772
napi_poll net/core/dev.c:6841 [inline]
net_rx_action+0xa5a/0x19b0 net/core/dev.c:6963
handle_softirqs+0x1ce/0x800 kernel/softirq.c:554
__do_softirq+0x14/0x1a kernel/softirq.c:588
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3998 [inline]
slab_alloc_node mm/slub.c:4041 [inline]
kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4084
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:583
__alloc_skb+0x363/0x7b0 net/core/skbuff.c:674
alloc_skb include/linux/skbuff.h:1320 [inline]
nf_send_reset6+0x98d/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:327
nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48
expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline]
nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288
nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626
nf_hook include/linux/netfilter.h:269 [inline]
NF_HOOK include/linux/netfilter.h:312 [inline]
ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310
__netif_receive_skb_one_core net/core/dev.c:5661 [inline]
__netif_receive_skb+0x1da/0xa00 net/core/dev.c:5775
process_backlog+0x4ad/0xa50 net/core/dev.c:6108
__napi_poll+0xe7/0x980 net/core/dev.c:6772
napi_poll net/core/dev.c:6841 [inline]
net_rx_action+0xa5a/0x19b0 net/core/dev.c:6963
handle_softirqs+0x1ce/0x800 kernel/softirq.c:554
__do_softirq+0x14/0x1a kernel/softirq.c:588
Fixes: c8d7b98bec43 ("netfilter: move nf_send_resetX() code to nf_reject_ipvX modules")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://patch.msgid.link/20240913170615.3670897-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
"This time it's mostly refactoring and improving APIs for slab users in
the kernel, along with some debugging improvements.
- kmem_cache_create() refactoring (Christian Brauner)
Over the years have been growing new parameters to
kmem_cache_create() where most of them are needed only for a small
number of caches - most recently the rcu_freeptr_offset parameter.
To avoid adding new parameters to kmem_cache_create() and adjusting
all its callers, or creating new wrappers such as
kmem_cache_create_rcu(), we can now pass extra parameters using the
new struct kmem_cache_args. Not explicitly initialized fields
default to values interpreted as unused.
kmem_cache_create() is for now a wrapper that works both with the
new form: kmem_cache_create(name, object_size, args, flags) and the
legacy form: kmem_cache_create(name, object_size, align, flags,
ctor)
- kmem_cache_destroy() waits for kfree_rcu()'s in flight (Vlastimil
Babka, Uladislau Rezki)
Since SLOB removal, kfree() is allowed for freeing objects
allocated by kmem_cache_create(). By extension kfree_rcu() as
allowed as well, which can allow converting simple call_rcu()
callbacks that only do kmem_cache_free(), as there was never a
kmem_cache_free_rcu() variant. However, for caches that can be
destroyed e.g. on module removal, the cache owners knew to issue
rcu_barrier() first to wait for the pending call_rcu()'s, and this
is not sufficient for pending kfree_rcu()'s due to its internal
batching optimizations. Ulad has provided a new
kvfree_rcu_barrier() and to make the usage less error-prone,
kmem_cache_destroy() calls it. Additionally, destroying
SLAB_TYPESAFE_BY_RCU caches now again issues rcu_barrier()
synchronously instead of using an async work, because the past
motivation for async work no longer applies. Users of custom
call_rcu() callbacks should however keep calling rcu_barrier()
before cache destruction.
- Debugging use-after-free in SLAB_TYPESAFE_BY_RCU caches (Jann Horn)
Currently, KASAN cannot catch UAFs in such caches as it is legal to
access them within a grace period, and we only track the grace
period when trying to free the underlying slab page. The new
CONFIG_SLUB_RCU_DEBUG option changes the freeing of individual
object to be RCU-delayed, after which KASAN can poison them.
- Delayed memcg charging (Shakeel Butt)
In some cases, the memcg is uknown at allocation time, such as
receiving network packets in softirq context. With
kmem_cache_charge() these may be now charged later when the user
and its memcg is known.
- Misc fixes and improvements (Pedro Falcato, Axel Rasmussen,
Christoph Lameter, Yan Zhen, Peng Fan, Xavier)"
* tag 'slab-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (34 commits)
mm, slab: restore kerneldoc for kmem_cache_create()
io_uring: port to struct kmem_cache_args
slab: make __kmem_cache_create() static inline
slab: make kmem_cache_create_usercopy() static inline
slab: remove kmem_cache_create_rcu()
file: port to struct kmem_cache_args
slab: create kmem_cache_create() compatibility layer
slab: port KMEM_CACHE_USERCOPY() to struct kmem_cache_args
slab: port KMEM_CACHE() to struct kmem_cache_args
slab: remove rcu_freeptr_offset from struct kmem_cache
slab: pass struct kmem_cache_args to do_kmem_cache_create()
slab: pull kmem_cache_open() into do_kmem_cache_create()
slab: pass struct kmem_cache_args to create_cache()
slab: port kmem_cache_create_usercopy() to struct kmem_cache_args
slab: port kmem_cache_create_rcu() to struct kmem_cache_args
slab: port kmem_cache_create() to struct kmem_cache_args
slab: add struct kmem_cache_args
slab: s/__kmem_cache_create/do_kmem_cache_create/g
memcg: add charging of already allocated slab objects
mm/slab: Optimize the code logic in find_mergeable()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Core:
- Overhaul of posix-timers in preparation of removing the workaround
for periodic timers which have signal delivery ignored.
- Remove the historical extra jiffie in msleep()
msleep() adds an extra jiffie to the timeout value to ensure
minimal sleep time. The timer wheel ensures minimal sleep time
since the large rewrite to a non-cascading wheel, but the extra
jiffie in msleep() remained unnoticed. Remove it.
- Make the timer slack handling correct for realtime tasks.
The procfs interface is inconsistent and does neither reflect
reality nor conforms to the man page. Show the correct 0 slack for
real time tasks and enforce it at the core level instead of having
inconsistent individual checks in various timer setup functions.
- The usual set of updates and enhancements all over the place.
Drivers:
- Allow the ACPI PM timer to be turned off during suspend
- No new drivers
- The usual updates and enhancements in various drivers"
* tag 'timers-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
ntp: Make sure RTC is synchronized when time goes backwards
treewide: Fix wrong singular form of jiffies in comments
cpu: Use already existing usleep_range()
timers: Rename next_expiry_recalc() to be unique
platform/x86:intel/pmc: Fix comment for the pmc_core_acpi_pm_timer_suspend_resume function
clocksource/drivers/jcore: Use request_percpu_irq()
clocksource/drivers/cadence-ttc: Add missing clk_disable_unprepare in ttc_setup_clockevent
clocksource/drivers/asm9260: Add missing clk_disable_unprepare in asm9260_timer_init
clocksource/drivers/qcom: Add missing iounmap() on errors in msm_dt_timer_init()
clocksource/drivers/ingenic: Use devm_clk_get_enabled() helpers
platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended
clocksource: acpi_pm: Add external callback for suspend/resume
clocksource/drivers/arm_arch_timer: Using for_each_available_child_of_node_scoped()
dt-bindings: timer: rockchip: Add rk3576 compatible
timers: Annotate possible non critical data race of next_expiry
timers: Remove historical extra jiffie for timeout in msleep()
hrtimer: Use and report correct timerslack values for realtime tasks
hrtimer: Annotate hrtimer_cpu_base_.*_expiry() for sparse.
timers: Add sparse annotation for timer_sync_wait_running().
signal: Replace BUG_ON()s
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Core:
- Remove a global lock in the affinity setting code
The lock protects a cpumask for intermediate results and the lock
causes a bottleneck on simultaneous start of multiple virtual
machines. Replace the lock and the static cpumask with a per CPU
cpumask which is nicely serialized by raw spinlock held when
executing this code.
- Provide support for giving a suffix to interrupt domain names.
That's required to support devices with subfunctions so that the
domain names are distinct even if they originate from the same
device node.
- The usual set of cleanups and enhancements all over the place
Drivers:
- Support for longarch AVEC interrupt chip
- Refurbishment of the Armada driver so it can be extended for new
variants.
- The usual set of cleanups and enhancements all over the place"
* tag 'irq-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
genirq: Use cpumask_intersects()
genirq/cpuhotplug: Use cpumask_intersects()
irqchip/apple-aic: Only access system registers on SoCs which provide them
irqchip/apple-aic: Add a new "Global fast IPIs only" feature level
irqchip/apple-aic: Skip unnecessary enabling of use_fast_ipi
dt-bindings: apple,aic: Document A7-A11 compatibles
irqdomain: Use IS_ERR_OR_NULL() in irq_domain_trim_hierarchy()
genirq/msi: Use kmemdup_array() instead of kmemdup()
genirq/proc: Change the return value for set affinity permission error
genirq/proc: Use irq_move_pending() in show_irq_affinity()
genirq/proc: Correctly set file permissions for affinity control files
genirq: Get rid of global lock in irq_do_set_affinity()
genirq: Fix typo in struct comment
irqchip/loongarch-avec: Add AVEC irqchip support
irqchip/loongson-pch-msi: Prepare get_pch_msi_handle() for AVECINTC
irqchip/loongson-eiointc: Rename CPUHP_AP_IRQ_LOONGARCH_STARTING
LoongArch: Architectural preparation for AVEC irqchip
LoongArch: Move irqchip function prototypes to irq-loongson.h
irqchip/loongson-pch-msi: Switch to MSI parent domains
softirq: Remove unused 'action' parameter from action callback
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs file updates from Christian Brauner:
"This is the work to cleanup and shrink struct file significantly.
Right now, (focusing on x86) struct file is 232 bytes. After this
series struct file will be 184 bytes aka 3 cacheline and a spare 8
bytes for future extensions at the end of the struct.
With struct file being as ubiquitous as it is this should make a
difference for file heavy workloads and allow further optimizations in
the future.
- struct fown_struct was embedded into struct file letting it take up
32 bytes in total when really it shouldn't even be embedded in
struct file in the first place. Instead, actual users of struct
fown_struct now allocate the struct on demand. This frees up 24
bytes.
- Move struct file_ra_state into the union containg the cleanup hooks
and move f_iocb_flags out of the union. This closes a 4 byte hole
we created earlier and brings struct file to 192 bytes. Which means
struct file is 3 cachelines and we managed to shrink it by 40
bytes.
- Reorder struct file so that nothing crosses a cacheline.
I suspect that in the future we will end up reordering some members
to mitigate false sharing issues or just because someone does
actually provide really good perf data.
- Shrinking struct file to 192 bytes is only part of the work.
Files use a slab that is SLAB_TYPESAFE_BY_RCU and when a kmem cache
is created with SLAB_TYPESAFE_BY_RCU the free pointer must be
located outside of the object because the cache doesn't know what
part of the memory can safely be overwritten as it may be needed to
prevent object recycling.
That has the consequence that SLAB_TYPESAFE_BY_RCU may end up
adding a new cacheline.
So this also contains work to add a new kmem_cache_create_rcu()
function that allows the caller to specify an offset where the
freelist pointer is supposed to be placed. Thus avoiding the
implicit addition of a fourth cacheline.
- And finally this removes the f_version member in struct file.
The f_version member isn't particularly well-defined. It is mainly
used as a cookie to detect concurrent seeks when iterating
directories. But it is also abused by some subsystems for
completely unrelated things.
It is mostly a directory and filesystem specific thing that doesn't
really need to live in struct file and with its wonky semantics it
really lacks a specific function.
For pipes, f_version is (ab)used to defer poll notifications until
a write has happened. And struct pipe_inode_info is used by
multiple struct files in their ->private_data so there's no chance
of pushing that down into file->private_data without introducing
another pointer indirection.
But pipes don't rely on f_pos_lock so this adds a union into struct
file encompassing f_pos_lock and a pipe specific f_pipe member that
pipes can use. This union of course can be extended to other file
types and is similar to what we do in struct inode already"
* tag 'vfs-6.12.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (26 commits)
fs: remove f_version
pipe: use f_pipe
fs: add f_pipe
ubifs: store cookie in private data
ufs: store cookie in private data
udf: store cookie in private data
proc: store cookie in private data
ocfs2: store cookie in private data
input: remove f_version abuse
ext4: store cookie in private data
ext2: store cookie in private data
affs: store cookie in private data
fs: add generic_llseek_c |
