| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
syzkaller discovered the following crash: (kernel BUG)
[ 44.607039] ------------[ cut here ]------------
[ 44.607422] kernel BUG at mm/userfaultfd.c:2067!
[ 44.608148] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
[ 44.608814] CPU: 1 UID: 0 PID: 2475 Comm: reproducer Not tainted 6.16.0-rc6 #1 PREEMPT(none)
[ 44.609635] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 44.610695] RIP: 0010:userfaultfd_release_all+0x3a8/0x460
<snip other registers, drop unreliable trace>
[ 44.617726] Call Trace:
[ 44.617926] <TASK>
[ 44.619284] userfaultfd_release+0xef/0x1b0
[ 44.620976] __fput+0x3f9/0xb60
[ 44.621240] fput_close_sync+0x110/0x210
[ 44.622222] __x64_sys_close+0x8f/0x120
[ 44.622530] do_syscall_64+0x5b/0x2f0
[ 44.622840] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 44.623244] RIP: 0033:0x7f365bb3f227
Kernel panics because it detects UFFD inconsistency during
userfaultfd_release_all(). Specifically, a VMA which has a valid pointer
to vma->vm_userfaultfd_ctx, but no UFFD flags in vma->vm_flags.
The inconsistency is caused in ksm_madvise(): when user calls madvise()
with MADV_UNMEARGEABLE on a VMA that is registered for UFFD in MINOR mode,
it accidentally clears all flags stored in the upper 32 bits of
vma->vm_flags.
Assuming x86_64 kernel build, unsigned long is 64-bit and unsigned int and
int are 32-bit wide. This setup causes the following mishap during the &=
~VM_MERGEABLE assignment.
VM_MERGEABLE is a 32-bit constant of type unsigned int, 0x8000'0000.
After ~ is applied, it becomes 0x7fff'ffff unsigned int, which is then
promoted to unsigned long before the & operation. This promotion fills
upper 32 bits with leading 0s, as we're doing unsigned conversion (and
even for a signed conversion, this wouldn't help as the leading bit is 0).
& operation thus ends up AND-ing vm_flags with 0x0000'0000'7fff'ffff
instead of intended 0xffff'ffff'7fff'ffff and hence accidentally clears
the upper 32-bits of its value.
Fix it by changing `VM_MERGEABLE` constant to unsigned long, using the
BIT() macro.
Note: other VM_* flags are not affected: This only happens to the
VM_MERGEABLE flag, as the other VM_* flags are all constants of type int
and after ~ operation, they end up with leading 1 and are thus converted
to unsigned long with leading 1s.
Note 2:
After commit 31defc3b01d9 ("userfaultfd: remove (VM_)BUG_ON()s"), this is
no longer a kernel BUG, but a WARNING at the same place:
[ 45.595973] WARNING: CPU: 1 PID: 2474 at mm/userfaultfd.c:2067
but the root-cause (flag-drop) remains the same.
[akpm@linux-foundation.org: rust bindgen wasn't able to handle BIT(), from Miguel]
Link: https://lore.kernel.org/oe-kbuild-all/202510030449.VfSaAjvd-lkp@intel.com/
Link: https://lkml.kernel.org/r/20251001090353.57523-2-acsjakub@amazon.de
Fixes: 7677f7fd8be7 ("userfaultfd: add minor fault registration mode")
Signed-off-by: Jakub Acs <acsjakub@amazon.de>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: SeongJae Park <sj@kernel.org>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Xu Xin <xu.xin16@zte.com.cn>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.
Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.
Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust.
This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.
The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.
All of these have been in linux-next for a while"
* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...
|
|
Pull drm updates from Dave Airlie:
"cross-subsystem:
- i2c-hid: Make elan touch controllers power on after panel is
enabled
- dt bindings for STM32MP25 SoC
- pci vgaarb: use screen_info helpers
- rust pin-init updates
- add MEI driver for late binding firmware update/load
uapi:
- add ioctl for reassigning GEM handles
- provide boot_display attribute on boot-up devices
core:
- document DRM_MODE_PAGE_FLIP_EVENT
- add vendor specific recovery method to drm device wedged uevent
gem:
- Simplify gpuvm locking
ttm:
- add interface to populate buffers
sched:
- Fix race condition in trace code
atomic:
- Reallow no-op async page flips
display:
- dp: Fix command length
video:
- Improve pixel-format handling for struct screen_info
rust:
- drop Opaque<> from ioctl args
- Alloc:
- BorrowedPage type and AsPageIter traits
- Implement Vmalloc::to_page() and VmallocPageIter
- DMA/Scatterlist:
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and sg_table
- DRM:
- simplify use of generics
- add DriverFile type alias
- drop Object::SIZE
- Rust:
- pin-init tree merge
- Various methods for AsBytes and FromBytes traits
gpuvm:
- Support madvice in Xe driver
gpusvm:
- fix hmm_pfn_to_map_order usage in gpusvm
bridge:
- Improve and fix ref counting on bridge management
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
- Support Content Protection property
- display-connector: Improve DP display detection
- Add support for Radxa Ra620 plus DT bindings
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu:
- add CRIU support for gem objects
- RAS updates
- VCN SRAM load fixes
- EDID read fixes
- eDP ALPM support
- Documentation updates
- Rework PTE flag generation
- DCE6 fixes
- VCN devcoredump cleanup
- MMHUB client id fixes
- VCN 5.0.1 RAS support
- SMU 13.0.x updates
- Expanded PCIe DPC support
- Expanded VCN reset support
- VPE per queue reset support
- give kernel jobs unique id for tracing
- pre-populate exported buffers
- cyan skillfish updates
- make vbios build number available in sysfs
- userq updates
- HDCP updates
- support MMIO remap page as ttm pool
- JPEG parser updates
- DCE6 DC updates
- use devm for i2c buses
- GPUVM locking updates
- Drop non-DC DCE11 code
- improve fallback handling for pixel encoding
amdkfd:
- SVM/page migration fixes
- debugfs fixes
- add CRIO support for gem objects
- SVM updates
radeon:
- use dev_warn_once in CS parsers
xe:
- add madvise interface
- add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
and memory attributes
- drop L# bank mask reporting from media GT3 on Xe3+.
- add SLPC power_profile sysfs interface
- add configs attribs to add post/mid context-switch commands
- handle firmware reported hardware errors notifying userspace with
device wedged uevent
- use same dir structure across sysfs/debugfs
- cleanup and future proof vram region init
- add G-states and PCI link states to debugfs
- Add SRIOV support for CCS surfaces on Xe2+
- Enable SRIOV PF mode by default on supported platforms
- move flush to common code
- extended core workarounds for Xe2/3
- use DRM scheduler for delayed GT TLB invalidations
- configs improvements and allow VF device enablement
- prep work to expose mmio regions to userspace
- VF migration support added
- prepare GPU SVM for THP migration
- start fixing XE_PAGE_SIZE vs PAGE_SIZE
- add PSMI support for hw validation
- resize VF bars to max possible size according to number of VFs
- Ensure GT is in C0 during resume
- pre-populate exported buffers
- replace xe_hmm with gpusvm
- add more SVM GT stats to debugfs
- improve fake pci and WA kunnit handle for new platform testing
- Test GuC to GuC comms to add debugging
- use attribute groups to simplify sysfs registration
- add Late Binding firmware code to interact with MEI
i915:
- apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
- protect against overflow in active_engine()
- Use try_cmpxchg64() in __active_lookup()
- include GuC registers in error state
- get rid of dev->struct_mutex
- iopoll: generalize read_poll_timout
- lots more display refactoring
- Reject HBR3 in any eDP Panel
- Prune modes for YUV420
- Display Wa fix, additions, and updates
- DP: Fix 2.7 Gbps link training on g4x
- DP: Adjust the idle pattern handling
- DP: Shuffle the link training code a bit
- Don't set/read the DSI C clock divider on GLK
- Enable_psr kernel parameter changes
- Type-C enabled/disconnected dp-alt sink
- Wildcat Lake enabling
- DP HDR updates
- DRAM detection
- wait PSR idle on dsb commit
- Remove FBC modulo 4 restriction for ADL-P+
- panic: refactor framebuffer allocation
habanalabs:
- debug/visibility improvements
- vmalloc-backed coherent mmap support
- HLDIO infrastructure
nova-core:
- various register!() macro improvements
- minor vbios/firmware fixes/refactoring
- advance firmware boot stages; process Booter and patch signatures
- process GSP and GSP bootloader
- Add r570.144 firmware bindings and update to it
- Move GSP boot code to own module
- Use new pin-init features to store driver's private data in a
single allocation
- Update ARef import from sync::aref
nova-drm:
- Update ARef import from sync::aref
tyr:
- initial driver skeleton for a rust driver for ARM Mali GPUs
- capable of powering up, query metadata and provide it to userspace.
msm:
- GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a623/a663 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
- Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
amdxdna:
- add IOCTL_AMDXDNA_GET_ARRAY
- support user space allocated buffers
- streamline PM interfaces
- Refactoring wrt. hardware contexts
- improve error reporting
nouveau:
- use GSP firmware by default
- improve error reporting
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
exynos:
- add DSIM bridge driver support for Exynos7870
- Document Exynos7870 DSIM compatible in dt-binding
panthor:
- Print task/pid on errors
- Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
- Improve cache flushing
- Fail VM bind if BO has offset
renesas:
- convert to RUNTIME_PM_OPS
rcar-du:
- Make number of lanes configurable
- Use RUNTIME_PM_OPS
- Add support for DSI commands
rocket:
- Add driver for Rockchip NPU plus DT bindings
- Use kfree() and sizeof() correctly
- Test DMA status
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
- Add support for RK3588 DPTX output
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
stm:
- Clean up logging
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss:
- Convert to kernel's FIELD_ macros
vesadrm:
- Support 8-bit palette mode
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
v3d:
- Improve job management and locking
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components"
* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
drm/amdgpu: update MODULE_PARM_DESC for freesync_video
drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
drm/amd/display: Share dce100_validate_global with DCE6-8
drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
drm/amdgpu: Fix fence signaling race condition in userqueue
amd/amdkfd: enhance kfd process check in switch partition
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
drm/amd/display: Reject modes with too high pixel clock on DCE6-10
drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
drm/amd/display: Only enable common modes for eDP and LVDS
drm/amdgpu: remove the redeclaration of variable i
drm/amdgpu/userq: assign an error code for invalid userq va
drm/amdgpu: revert "rework reserved VMID handling" v2
drm/amdgpu: remove leftover from enforcing isolation by VMID
drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
accel/habanalabs: add Infineon version check
accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
accel/habanalabs: add HL_GET_P_STATE passthrough type
...
|
|
Pull bitmap updates from Yury Norov:
- FIELD_PREP_WM16() consolidation (Nicolas)
- bitmaps for Rust (Burak)
- __fls() fix for arc (Kees)
* tag 'bitmap-for-6.18' of https://github.com/norov/linux: (25 commits)
rust: add dynamic ID pool abstraction for bitmap
rust: add find_bit_benchmark_rust module.
rust: add bitmap API.
rust: add bindings for bitops.h
rust: add bindings for bitmap.h
phy: rockchip-pcie: switch to FIELD_PREP_WM16 macro
clk: sp7021: switch to FIELD_PREP_WM16 macro
PCI: dw-rockchip: Switch to FIELD_PREP_WM16 macro
PCI: rockchip: Switch to FIELD_PREP_WM16* macros
net: stmmac: dwmac-rk: switch to FIELD_PREP_WM16 macro
ASoC: rockchip: i2s-tdm: switch to FIELD_PREP_WM16_CONST macro
drm/rockchip: dw_hdmi: switch to FIELD_PREP_WM16* macros
phy: rockchip-usb: switch to FIELD_PREP_WM16 macro
drm/rockchip: inno-hdmi: switch to FIELD_PREP_WM16 macro
drm/rockchip: dw_hdmi_qp: switch to FIELD_PREP_WM16 macro
phy: rockchip-samsung-dcphy: switch to FIELD_PREP_WM16 macro
drm/rockchip: vop2: switch to FIELD_PREP_WM16 macro
drm/rockchip: dsi: switch to FIELD_PREP_WM16* macros
phy: rockchip-emmc: switch to FIELD_PREP_WM16 macro
drm/rockchip: lvds: switch to FIELD_PREP_WM16 macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Auxiliary:
- Drop call to dev_pm_domain_detach() in auxiliary_bus_probe()
- Optimize logic of auxiliary_match_id()
Rust:
- Auxiliary:
- Use primitive C types from prelude
- DebugFs:
- Add debugfs support for simple read/write files and custom
callbacks through a File-type-based and directory-scope-based
API
- Sample driver code for the File-type-based API
- Sample module code for the directory-scope-based API
- I/O:
- Add io::poll module and implement Rust specific
read_poll_timeout() helper
- IRQ:
- Implement support for threaded and non-threaded device IRQs
based on (&Device<Bound>, IRQ number) tuples (IrqRequest)
- Provide &Device<Bound> cookie in IRQ handlers
- PCI:
- Support IRQ requests from IRQ vectors for a specific
pci::Device<Bound>
- Implement accessors for subsystem IDs, revision, devid and
resource start
- Provide dedicated pci::Vendor and pci::Class types for vendor
and class ID numbers
- Implement Display to print actual vendor and class names; Debug
to print the raw ID numbers
- Add pci::DeviceId::from_class_and_vendor() helper
- Use primitive C types from prelude
- Various minor inline and (safety) comment improvements
- Platform:
- Support IRQ requests from IRQ vectors for a specific
platform::Device<Bound>
- Nova:
- Use pci::DeviceId::from_class_and_vendor() to avoid probing
non-display/compute PCI functions
- Misc:
- Add helper for cpu_relax()
- Update ARef import from sync::aref
sysfs:
- Remove bin_attrs_new field from struct attribute_group
- Remove read_new() and write_new() from struct bin_attribute
Misc:
- Document potential race condition in get_dev_from_fwnode()
- Constify node_group argument in software node registration
functions
- Fix order of kernel-doc parameters in various functions
- Set power.no_pm flag for faux devices
- Set power.no_callbacks flag along with the power.no_pm flag
- Constify the pmu_bus bus type
- Minor spelling fixes"
* tag 'driver-core-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (43 commits)
rust: pci: display symbolic PCI vendor names
rust: pci: display symbolic PCI class names
rust: pci: fix incorrect platform reference in PCI driver probe doc comment
rust: pci: fix incorrect platform reference in PCI driver unbind doc comment
perf: make pmu_bus const
samples: rust: Add scoped debugfs sample driver
rust: debugfs: Add support for scoped directories
samples: rust: Add debugfs sample driver
rust: debugfs: Add support for callback-based files
rust: debugfs: Add support for writable files
rust: debugfs: Add support for read-only files
rust: debugfs: Add initial support for directories
driver core: auxiliary bus: Optimize logic of auxiliary_match_id()
driver core: auxiliary bus: Drop dev_pm_domain_detach() call
driver core: Fix order of the kernel-doc parameters
driver core: get_dev_from_fwnode(): document potential race
drivers: base: fix "publically"->"publicly"
driver core/PM: Set power.no_callbacks along with power.no_pm
driver core: faux: Set power.no_pm for faux devices
rust: pci: inline several tiny functions
...
|
|
The rust USB bindings as submitted are a good start, but they don't
really seem to be correct in a number of minor places, so just disable
them from the build entirely at this point in time. When they are ready
to be re-enabled, this commit can be reverted.
Acked-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add basic USB abstractions, consisting of usb::{Device, Interface,
Driver, Adapter, DeviceId} and the module_usb_driver macro. This is the
first step in being able to write USB device drivers, which paves the
way for USB media drivers - for example - among others.
This initial support will then be used by a subsequent sample driver,
which constitutes the only user of the USB abstractions so far.
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250825-b4-usb-v1-1-7aa024de7ae8@collabora.com
[ force USB = y for now - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Microbenchmark protected by a config FIND_BIT_BENCHMARK_RUST,
following `find_bit_benchmark.c` but testing the Rust Bitmap API.
We add a fill_random() method protected by the config in order to
maintain the abstraction.
The sample output from the benchmark, both C and Rust version:
find_bit_benchmark.c output:
```
Start testing find_bit() with random-filled bitmap
[ 438.101937] find_next_bit: 860188 ns, 163419 iterations
[ 438.109471] find_next_zero_bit: 912342 ns, 164262 iterations
[ 438.116820] find_last_bit: 726003 ns, 163419 iterations
[ 438.130509] find_nth_bit: 7056993 ns, 16269 iterations
[ 438.139099] find_first_bit: 1963272 ns, 16270 iterations
[ 438.173043] find_first_and_bit: 27314224 ns, 32654 iterations
[ 438.180065] find_next_and_bit: 398752 ns, 73705 iterations
[ 438.186689]
Start testing find_bit() with sparse bitmap
[ 438.193375] find_next_bit: 9675 ns, 656 iterations
[ 438.201765] find_next_zero_bit: 1766136 ns, 327025 iterations
[ 438.208429] find_last_bit: 9017 ns, 656 iterations
[ 438.217816] find_nth_bit: 2749742 ns, 655 iterations
[ 438.225168] find_first_bit: 721799 ns, 656 iterations
[ 438.231797] find_first_and_bit: 2819 ns, 1 iterations
[ 438.238441] find_next_and_bit: 3159 ns, 1 iterations
```
find_bit_benchmark_rust.rs output:
```
[ 451.182459] find_bit_benchmark_rust:
[ 451.186688] Start testing find_bit() Rust with random-filled bitmap
[ 451.194450] next_bit: 777950 ns, 163644 iterations
[ 451.201997] next_zero_bit: 918889 ns, 164036 iterations
[ 451.208642] Start testing find_bit() Rust with sparse bitmap
[ 451.214300] next_bit: 9181 ns, 654 iterations
[ 451.222806] next_zero_bit: 1855504 ns, 327026 iterations
```
Here are the results from 32 samples, with 95% confidence interval.
The microbenchmark was built with RUST_BITMAP_HARDENED=n and run on a
machine that did not execute other processes.
Random-filled bitmap:
+-----------+-------+-----------+--------------+-----------+-----------+
| Benchmark | Lang | Mean (ms) | Std Dev (ms) | 95% CI Lo | 95% CI Hi |
+-----------+-------+-----------+--------------+-----------+-----------+
| find_bit/ | C | 825.07 | 53.89 | 806.40 | 843.74 |
| next_bit | Rust | 870.91 | 46.29 | 854.88 | 886.95 |
+-----------+-------+-----------+--------------+-----------+-----------+
| find_zero/| C | 933.56 | 56.34 | 914.04 | 953.08 |
| next_zero | Rust | 945.85 | 60.44 | 924.91 | 966.79 |
+-----------+-------+-----------+--------------+-----------+-----------+
Rust appears 5.5% slower for next_bit, 1.3% slower for next_zero.
Sparse bitmap:
+-----------+-------+-----------+--------------+-----------+-----------+
| Benchmark | Lang | Mean (ms) | Std Dev (ms) | 95% CI Lo | 95% CI Hi |
+-----------+-------+-----------+--------------+-----------+-----------+
| find_bit/ | C | 13.17 | 6.21 | 11.01 | 15.32 |
| next_bit | Rust | 14.30 | 8.27 | 11.43 | 17.17 |
+-----------+-------+-----------+--------------+-----------+-----------+
| find_zero/| C | 1859.31 | 82.30 | 1830.80 | 1887.83 |
| next_zero | Rust | 1908.09 | 139.82 | 1859.65 | 1956.54 |
+-----------+-------+-----------+--------------+-----------+-----------+
Rust appears 8.5% slower for next_bit, 2.6% slower for next_zero.
In summary, taking the arithmetic mean of all slow-downs, we can say
the Rust API has a 4.5% slowdown.
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Suggested-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Reviewed-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Burak Emir <bqe@google.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
|
|
Makes the bitmap_copy_and_extend inline function available to Rust.
Adds F: to existing MAINTAINERS section BITMAP API BINDINGS [RUST].
-
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Burak Emir <bqe@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
|
|
We're generally not proponents of rewrites (nasty uncomfortable things
that make you late for dinner!). So why rewrite Binder?
Binder has been evolving over the past 15+ years to meet the evolving
needs of Android. Its responsibilities, expectations, and complexity
have grown considerably during that time. While we expect Binder to
continue to evolve along with Android, there are a number of factors
that currently constrain our ability to develop/maintain it. Briefly
those are:
1. Complexity: Binder is at the intersection of everything in Android and
fulfills many responsibilities beyond IPC. It has become many things
to many people, and due to its many features and their interactions
with each other, its complexity is quite high. In just 6kLOC it must
deliver transactions to the right threads. It must correctly parse
and translate the contents of transactions, which can contain several
objects of different types (e.g., pointers, fds) that can interact
with each other. It controls the size of thread pools in userspace,
and ensures that transactions are assigned to threads in ways that
avoid deadlocks where the threadpool has run out of threads. It must
track refcounts of objects that are shared by several processes by
forwarding refcount changes between the processes correctly. It must
handle numerous error scenarios and it combines/nests 13 different
locks, 7 reference counters, and atomic variables. Finally, It must
do all of this as fast and efficiently as possible. Minor performance
regressions can cause a noticeably degraded user experience.
2. Things to improve: Thousand-line functions [1], error-prone error
handling [2], and confusing structure can occur as a code base grows
organically. After more than a decade of development, this codebase
could use an overhaul.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/android/binder.c?h=v6.5#n2896
[2]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/android/binder.c?h=v6.5#n3658
3. Security critical: Binder is a critical part of Android's sandboxing
strategy. Even Android's most de-privileged sandboxes (e.g. the
Chrome renderer, or SW Codec) have direct access to Binder. More than
just about any other component, it's important that Binder provide
robust security, and itself be robust against security
vulnerabilities.
It's #1 (high complexity) that has made continuing to evolve Binder and
resolving #2 (tech debt) exceptionally difficult without causing #3
(security issues). For Binder to continue to meet Android's needs, we
need better ways to manage (and reduce!) complexity without increasing
the risk.
The biggest change is obviously the choice of programming language. We
decided to use Rust because it directly addresses a number of the
challenges within Binder that we have faced during the last years. It
prevents mistakes with ref counting, locking, bounds checking, and also
does a lot to reduce the complexity of error handling. Additionally,
we've been able to use the more expressive type system to encode the
ownership semantics of the various structs and pointers, which takes the
complexity of managing object lifetimes out of the hands of the
programmer, reducing the risk of use-after-frees and similar problems.
Rust has many different pointer types that it uses to encode ownership
semantics into the type system, and this is probably one of the most
important aspects of how it helps in Binder. The Binder driver has a lot
of different objects that have complex ownership semantics; some
pointers own a refcount, some pointers have exclusive ownership, and
some pointers just reference the object and it is kept alive in some
other manner. With Rust, we can use a different pointer type for each
kind of pointer, which enables the compiler to enforce that the
ownership semantics are implemented correctly.
Another useful feature is Rust's error handling. Rust allows for more
simplified error handling with features such as destructors, and you get
compilation failures if errors are not properly handled. This means that
even though Rust requires you to spend more lines of code than C on
things such as writing down invariants that are left implicit in C, the
Rust driver is still slightly smaller than C binder: Rust is 5.5kLOC and
C is 5.8kLOC. (These numbers are excluding blank lines, comments,
binderfs, and any debugging facilities in C that are not yet implemented
in the Rust driver. The numbers include abstractions in rust/kernel/
that are unlikely to be used by other drivers than Binder.)
Although this rewrite completely rethinks how the code is structured and
how assumptions are enforced, we do not fundamentally change *how* the
driver does the things it does. A lot of careful thought has gone into
the existing design. The rewrite is aimed rather at improving code
health, structure, readability, robustness, security, maintainability
and extensibility. We also include more inline documentation, and
improve how assumptions in the code are enforced. Furthermore, all
unsafe code is annotated with a SAFETY comment that explains why it is
correct.
We have left the binderfs filesystem component in C. Rewriting it in
Rust would be a large amount of work and requires a lot of bindings to
the file system interfaces. Binderfs has not historically had the same
challenges with security and complexity, so rewriting binderfs seems to
have lower value than the rest of Binder.
Correctness and feature parity
------------------------------
Rust binder passes all tests that validate the correctness of Binder in
the Android Open Source Project. We can boot a device, and run a variety
of apps and functionality without issues. We have performed this both on
the Cuttlefish Android emulator device, and on a Pixel 6 Pro.
As for feature parity, Rust binder currently implements all features
that C binder supports, with the exception of some debugging facilities.
The missing debugging facilities will be added before we submit the Rust
implementation upstream.
Tracepoints
-----------
I did not include all of the tracepoints as I felt that the mechansim
for making C access fields of Rust structs should be discussed on list
separately. I also did not include the support for building Rust Binder
as a module since that requires exporting a bunch of additional symbols
on the C side.
Original RFC Link with old benchmark numbers:
https://lore.kernel.org/r/20231101-rust-binder-v1-0-08ba9197f637@google.com
Co-developed-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Co-developed-by: Matt Gilbride <mattgilbride@google.com>
Signed-off-by: Matt Gilbride <mattgilbride@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250919-rust-binder-v2-1-a384b09f28dd@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Adds a `debugfs::Dir` type that can be used to create and remove
DebugFS directories. The `Dir` handle automatically cleans up the
directory on `Drop`.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250904-debugfs-rust-v11-1-7d12a165685a@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
possible
Using the `--with-derive-custom-{struct,union}` option of bindgen, add
`#[derive(MaybeZeroable)]` to every struct & union. This makes those
types implement `Zeroable` if all their fields implement it.
Sadly bindgen doesn't add custom derives to the `__BindgenBitfieldUnit`
struct. So manually implement `Zeroable` for that.
Signed-off-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
[ Formatted comment. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add the `DataDirection` struct, a newtype wrapper around the C
`enum dma_data_direction`.
This provides a type-safe Rust interface for specifying the direction of
DMA transfers.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250828133323.53311-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Currently, a Page always owns the underlying struct page.
However, sometimes a struct page may be owned by some other entity, e.g.
a vmalloc allocation.
Hence, introduce BorrowedPage to support such cases, until the Ownable
solution [1] lands.
This is required by the scatterlist abstractions.
Acked-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/rust-for-linux/ZnCzLIly3DRK2eab@boqun-archlinux/ [1]
Link: https://lore.kernel.org/r/20250820145434.94745-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The kernel's allocators sometimes provide a higher alignment than the
end-user requested, so add a new constant on the Allocator trait to let
the allocator specify what its minimum guaranteed alignment is.
This allows the ForeignOwnable trait to provide a more accurate value of
FOREIGN_ALIGN when using a pointer type such as Box, which will be
useful with certain collections such as XArray that store its own data
in the low bits of pointers.
Reviewed-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250811-align-min-allocator-v2-1-3386cc94f4fc@google.com
[ Add helper for ARCH_KMALLOC_MINALIGN; remove cast to usize. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
This patch adds support for non-threaded IRQs and handlers through
irq::Registration and the irq::Handler trait.
Registering an irq is dependent upon having a IrqRequest that was
previously allocated by a given device. This will be introduced in
subsequent patches.
Tested-by: Joel Fernandes <joelagnelf@nvidia.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250811-topics-tyr-request_irq2-v9-3-0485dcd9bcbf@collabora.com
[ Remove expect(dead_code) from Flags::into_inner(), add
expect(dead_code) to IrqRequest::new(), fix intra-doc links. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Enable a set of Clippy lints: 'ptr_as_ptr', 'ptr_cast_constness',
'as_ptr_cast_mut', 'as_underscore', 'cast_lossless' and
'ref_as_ptr'
These are intended to avoid type casts with the 'as' operator,
which are quite powerful, into restricted variants that are less
powerful and thus should help to avoid mistakes
- Remove the 'author' key now that most instances were moved to the
plural one in the previous cycle
'kernel' crate:
- New 'bug' module: add 'warn_on!' macro which reuses the existing
'BUG'/'WARN' infrastructure, i.e. it respects the usual sysctls and
kernel parameters:
warn_on!(value == 42);
To avoid duplicating the assembly code, the same strategy is
followed as for the static branch code in order to share the
assembly between both C and Rust
This required a few rearrangements on C arch headers -- the
existing C macros should still generate the same outputs, thus no
functional change expected there
- 'workqueue' module: add delayed work items, including a
'DelayedWork' struct, a 'impl_has_delayed_work!' macro and an
'enqueue_delayed' method, e.g.:
/// Enqueue the struct for execution on the system workqueue,
/// where its value will be printed 42 jiffies later.
fn print_later(value: Arc<MyStruct>) {
let _ = workqueue::system().enqueue_delayed(value, 42);
}
- New 'bits' module: add support for 'bit' and 'genmask' functions,
with runtime- and compile-time variants, e.g.:
static_assert!(0b00010000 == bit_u8(4));
static_assert!(0b00011110 == genmask_u8(1..=4));
assert!(checked_bit_u32(u32::BITS).is_none());
- 'uaccess' module: add 'UserSliceReader::strcpy_into_buf', which
reads NUL-terminated strings from userspace into a '&CStr'
Introduce 'UserPtr' newtype, similar in purpose to '__user' in C,
to minimize mistakes handling userspace pointers, including mixing
them up with integers and leaking them via the 'Debug' trait. Add
it to the prelude, too
- Start preparations for the replacement of our custom 'CStr' type
with the analogous type in the 'core' standard library. This will
take place across several cycles to make it easier. For this one,
it includes a new 'fmt' module, using upstream method names and
some other cleanups
Replace 'fmt!' with a re-export, which helps Clippy lint properly,
and clean up the found 'uninlined-format-args' instances
- 'dma' module:
- Clarify wording and be consistent in 'coherent' nomenclature
- Convert the 'read!()' and 'write!()' macros to return a 'Result'
- Add 'as_slice()', 'write()' methods in 'CoherentAllocation'
- Expose 'count()' and 'size()' in 'CoherentAllocation' and add
the corresponding type invariants
- Implement 'CoherentAllocation::dma_handle_with_offset()'
- 'time' module:
- Make 'Instant' generic over clock source. This allows the
compiler to assert that arithmetic expressions involving the
'Instant' use 'Instants' based on the same clock source
- Make 'HrTimer' generic over the timer mode. 'HrTimer' timers
take a 'Duration' or an 'Instant' when setting the expiry time,
depending on the timer mode. With this change, the compiler can
check the type matches the timer mode
- Add an abstraction for 'fsleep'. 'fsleep' is a flexible sleep
function that will select an appropriate sleep method depending
on the requested sleep time
- Avoid 64-bit divisions on 32-bit hardware when calculating
timestamps
- Seal the 'HrTimerMode' trait. This prevents users of the
'HrTimerMode' from implementing the trait on their own types
- Pass the correct timer mode ID to 'hrtimer_start_range_ns()'
- 'list' module: remove 'OFFSET' constants, allowing to remove
pointer arithmetic; now 'impl_list_item!' invokes
'impl_has_list_links!' or 'impl_has_list_links_self_ptr!'. Other
simplifications too
- 'types' module: remove 'ForeignOwnable::PointedTo' in favor of a
constant, which avoids exposing the type of the opaque pointer, and
require 'into_foreign' to return non-null
Remove the 'Either<L, R>' type as well. It is unused, and we want
to encourage the use of custom enums for concrete use cases
- 'sync' module: implement 'Borrow' and 'BorrowMut' for 'Arc' types
to allow them to be used in generic APIs
- 'alloc' module: implement 'Borrow' and 'BorrowMut' for 'Box<T, A>';
and 'Borrow', 'BorrowMut' and 'Default' for 'Vec<T, A>'
- 'Opaque' type: add 'cast_from' method to perform a restricted cast
that cannot change the inner type and use it in callers of
'container_of!'. Rename 'raw_get' to 'cast_into' to match it
- 'rbtree' module: add 'is_empty' method
- 'sync' module: new 'aref' submodule to hold 'AlwaysRefCounted' and
'ARef', which are moved from the too general 'types' module which
we want to reduce or eventually remove. Also fix a safety comment
in 'static_lock_class'
'pin-init' crate:
- Add 'impl<T, E> [Pin]Init<T, E> for Result<T, E>', so results are
now (pin-)initializers
- Add 'Zeroable::init_zeroed()' that delegates to 'init_zeroed()'
- New 'zeroed()', a safe version of 'mem::zeroed()' and also provide
it via 'Zeroable::zeroed()'
- Implement 'Zeroable' for 'Option<&T>', 'Option<&mut T>' and for
'Option<[unsafe] [extern "abi"] fn(...args...) -> ret>' for
'"Rust"' and '"C"' ABIs and up to 20 arguments
- Changed blanket impls of 'Init' and 'PinInit' from 'impl<T, E>
[Pin]Init<T, E> for T' to 'impl<T> [Pin]Init<T> for T'
- Renamed 'zeroed()' to 'init_zeroed()'
- Upstream dev news: improve CI more to deny warnings, use
'--all-targets'. Check the synchronization status of the two
'-next' branches in upstream and the kernel
MAINTAINERS:
- Add Vlastimil Babka, Liam R. Howlett, Uladzislau Rezki and Lorenzo
Stoakes as reviewers (thanks everyone)
And a few other cleanups and improvements"
* tag 'rust-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (76 commits)
rust: Add warn_on macro
arm64/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
riscv/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
x86/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
rust: kernel: move ARef and AlwaysRefCounted to sync::aref
rust: sync: fix safety comment for `static_lock_class`
rust: types: remove `Either<L, R>`
rust: kernel: use `core::ffi::CStr` method names
rust: str: add `CStr` methods matching `core::ffi::CStr`
rust: str: remove unnecessary qualification
rust: use `kernel::{fmt,prelude::fmt!}`
rust: kernel: add `fmt` module
rust: kernel: remove `fmt!`, fix clippy::uninlined-format-args
scripts: rust: emit path candidates in panic message
scripts: rust: replace length checks with match
rust: list: remove nonexistent generic parameter in link
rust: bits: add support for bits/genmask macros
rust: list: remove OFFSET constants
rust: list: add `impl_list_item!` examples
rust: list: use fully qualified path
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
|
|
In preparation for ioremap support, add a Rust abstraction for struct
resource.
A future commit will introduce the Rust API to ioremap a resource from a
platform device. The current abstraction, therefore, adds only the
minimum API needed to get that done.
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Co-developed-by: Fiona Behrens <me@kloenk.dev>
Signed-off-by: Fiona Behrens <me@kloenk.dev>
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250717-topics-tyr-platform_iomem-v15-1-beca780b77e3@collabora.com
[ Capitalize safety comments and end it with a period. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add a bare minimum regulator abstraction to be used by Rust drivers.
This abstraction adds a small subset of the regulator API, which is
thought to be sufficient for the drivers we have now.
Regulators provide the power needed by many hardware blocks and thus are
likely to be needed by a lot of drivers.
It was tested on rk3588, where it was used to power up the "mali"
regulator in order to power up the GPU.
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20250714-topics-tyr-regulator2-v8-1-c7ab3955 |
