| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 7a5f93ea5862da91488975acaa0c7abd508f192b upstream.
Each `bindgen` release may upgrade the list of Rust targets. For instance,
currently, in their master branch [1], the latest ones are:
Nightly => {
vectorcall_abi: #124485,
ptr_metadata: #81513,
layout_for_ptr: #69835,
},
Stable_1_77(77) => { offset_of: #106655 },
Stable_1_73(73) => { thiscall_abi: #42202 },
Stable_1_71(71) => { c_unwind_abi: #106075 },
Stable_1_68(68) => { abi_efiapi: #105795 },
By default, the highest stable release in their list is used, and users
are expected to set one if they need to support older Rust versions
(e.g. see [2]).
Thus, over time, new Rust features are used by default, and at some
point, it is likely that `bindgen` will emit Rust code that requires a
Rust version higher than our minimum (or perhaps enabling an unstable
feature). Currently, there is no problem because the maximum they have,
as seen above, is Rust 1.77.0, and our current minimum is Rust 1.78.0.
Therefore, set a Rust target explicitly now to prevent going forward in
time too much and thus getting potential build failures at some point.
Since we also support a minimum `bindgen` version, and since `bindgen`
does not support passing unknown Rust target versions, we need to use
the list of our minimum `bindgen` version, rather than the latest. So,
since `bindgen` 0.65.1 had this list [3], we need to use Rust 1.68.0:
/// Rust stable 1.64
/// * `core_ffi_c` ([Tracking issue](https://github.com/rust-lang/rust/issues/94501))
=> Stable_1_64 => 1.64;
/// Rust stable 1.68
/// * `abi_efiapi` calling convention ([Tracking issue](https://github.com/rust-lang/rust/issues/65815))
=> Stable_1_68 => 1.68;
/// Nightly rust
/// * `thiscall` calling convention ([Tracking issue](https://github.com/rust-lang/rust/issues/42202))
/// * `vectorcall` calling convention (no tracking issue)
/// * `c_unwind` calling convention ([Tracking issue](https://github.com/rust-lang/rust/issues/74990))
=> Nightly => nightly;
...
/// Latest stable release of Rust
pub const LATEST_STABLE_RUST: RustTarget = RustTarget::Stable_1_68;
Thus add the `--rust-target 1.68` parameter. Add a comment as well
explaining this.
An alternative would be to use the currently running (i.e. actual) `rustc`
and `bindgen` versions to pick a "better" Rust target version. However,
that would introduce more moving parts depending on the user setup and
is also more complex to implement.
Starting with `bindgen` 0.71.0 [4], we will be able to set any future
Rust version instead, i.e. we will be able to set here our minimum
supported Rust version. Christian implemented it [5] after seeing this
patch. Thanks!
Cc: Christian Poveda <git@pvdrz.com>
Cc: Emilio Cobos Álvarez <emilio@crisal.io>
Cc: stable@vger.kernel.org # needed for 6.12.y; unneeded for 6.6.y; do not apply to 6.1.y
Fixes: c844fa64a2d4 ("rust: start supporting several `bindgen` versions")
Link: https://github.com/rust-lang/rust-bindgen/blob/21c60f473f4e824d4aa9b2b508056320d474b110/bindgen/features.rs#L97-L105 [1]
Link: https://github.com/rust-lang/rust-bindgen/issues/2960 [2]
Link: https://github.com/rust-lang/rust-bindgen/blob/7d243056d335fdc4537f7bca73c06d01aae24ddc/bindgen/features.rs#L131-L150 [3]
Link: https://github.com/rust-lang/rust-bindgen/blob/main/CHANGELOG.md#0710-2024-12-06 [4]
Link: https://github.com/rust-lang/rust-bindgen/pull/2993 [5]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241123180323.255997-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c95bbb59a9b22f9b838b15d28319185c1c884329 upstream.
The term "receiver" means that a type can be used as the type of `self`,
and thus enables method call syntax `foo.bar()` instead of
`Foo::bar(foo)`. Stable Rust as of today (1.81) enables a limited
selection of types (primitives and types in std, e.g. `Box` and `Arc`)
to be used as receivers, while custom types cannot.
We want the kernel `Arc` type to have the same functionality as the Rust
std `Arc`, so we use the `Receiver` trait (gated behind `receiver_trait`
unstable feature) to gain the functionality.
The `arbitrary_self_types` RFC [1] (tracking issue [2]) is accepted and
it will allow all types that implement a new `Receiver` trait (different
from today's unstable trait) to be used as receivers. This trait will be
automatically implemented for all `Deref` types, which include our `Arc`
type, so we no longer have to opt-in to be used as receiver. To prepare
us for the change, remove the `Receiver` implementation and the
associated feature. To still allow `Arc` and others to be used as method
receivers, turn on `arbitrary_self_types` feature instead.
This feature gate is introduced in 1.23.0. It used to enable both
`Deref` types and raw pointer types to be used as receivers, but the
latter is now split into a different feature gate in Rust 1.83 nightly.
We do not need receivers on raw pointers so this change would not affect
us and usage of `arbitrary_self_types` feature would work for all Rust
versions that we support (>=1.78).
Cc: Adrian Taylor <ade@hohum.me.uk>
Link: https://github.com/rust-lang/rfcs/pull/3519 [1]
Link: https://github.com/rust-lang/rust/issues/44874 [2]
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240915132734.1653004-1-gary@garyguo.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 28e848386b92645f93b9f2fdba5882c3ca7fb3e2 ]
Fix several issues with rustdoc formatting for the
`kernel::block::mq::Request` module, in particular:
- An ordered list not rendering correctly, fixed by using numbers
prefixes instead of letters.
- Code snippets formatted as regular text, fixed by wrapping the
code with `back-ticks`.
- References to types missing intra-doc links, fixed by wrapping the
types with [square brackets].
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Closes: https://github.com/Rust-for-Linux/linux/issues/1108
Signed-off-by: Francesco Zardi <frazar00@gmail.com>
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
Fixes: 3253aba3408a ("rust: block: introduce `kernel::block::mq` module")
Link: https://lore.kernel.org/r/20240903173027.16732-3-frazar00@gmail.com
[ Added an extra intra-doc link. Took the chance to add some periods
for consistency. Reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 15541c9263ce34ff95a06bc68f45d9bc5c990bcd ]
One of the example in this section uses a curious mix of the constant
and function declaration syntaxes; fix it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Fixes: 823d4737d4c2 ("rust: macros: add `paste!` proc macro")
Link: https://lore.kernel.org/r/20241019072208.1016707-1-pbonzini@redhat.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8b55dc8610acf816a66373be53ca6e3bbe2d313a ]
The doc comment for `ThisModule` incorrectly states the C header file
for `THIS_MODULE` as `include/linux/export.h`, while the correct path is
`include/linux/init.h`. This is because `THIS_MODULE` was moved in
commit 5b20755b7780 ("init: move THIS_MODULE from <linux/export.h> to
<linux/init.h>").
Update the doc comment for `ThisModule` to reflect the correct header
file path for `THIS_MODULE`.
Fixes: 5b20755b7780 ("init: move THIS_MODULE from <linux/export.h> to <linux/init.h>")
Signed-off-by: Yutaro Ohno <yutaro.ono.418@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/ZxXDZwxWgoEiIYkj@ohnotp
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8333ff4d0799aafbe4275cddcbaf45e545e4efba ]
The tag `SAFETY` is used for safety comments, i.e. `// SAFETY`, while a
`Safety` section is used for safety preconditions in code documentation,
i.e. `/// # Safety`.
Fix the three instances recently added in `rbtree` that Clippy would
have normally caught in a public item, so that we can enable checking
of private items in one of the following commits.
Fixes: 98c14e40e07a ("rust: rbtree: add cursor")
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240904204347.168520-14-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5c2e7736e20d9b348a44cafbfa639fe2653fbc34 ]
When PREEMPT_RT=y, spin locks are mapped to rt_mutex types, so using
spinlock_check() + __raw_spin_lock_init() to initialize spin locks is
incorrect, and would cause build errors.
Introduce __spin_lock_init() to initialize a spin lock with lockdep
rquired information for PREEMPT_RT builds, and use it in the Rust
helper.
Fixes: d2d6422f8bd1 ("x86: Allow to enable PREEMPT_RT.")
Closes: https://lore.kernel.org/oe-kbuild-all/202409251238.vetlgXE9-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Eder Zulian <ezulian@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20241107163223.2092690-2-ezulian@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here is a single driver core fix, and a .mailmap update.
The fix is for the rust driver core bindings, turned out that the
from_raw binding wasn't a good idea (don't want to pass a pointer to a
reference counted object without actually incrementing the pointer.)
So this change fixes it up as the from_raw binding came in in -rc1.
The other change is a .mailmap update.
Both have been in linux-next for a while with no reported issues"
* tag 'driver-core-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
mailmap: update mail for Fiona Behrens
rust: device: change the from_raw() function
|
|
The function Device::from_raw() increments a refcount by a call to
bindings::get_device(ptr). This can be confused because usually
from_raw() functions don't increment a refcount.
Hence, rename Device::from_raw() to avoid confuion with other "from_raw"
semantics.
The new name of function should be "get_device" to be consistent with
the function get_device() already exist in .c files.
This function body also changed, because the `into()` will convert the
`&'a Device` into `ARef<Device>` and also call `inc_ref` from the
`AlwaysRefCounted` trait implemented for Device.
Signed-off-by: Guilherme Giacomo Simoes <trintaeoitogc@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Closes: https://github.com/Rust-for-Linux/linux/issues/1088
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20241001205603.106278-1-trintaeoitogc@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Starting with upstream Rust commit a5e3a3f9b6bd ("move
`manual_c_str_literals` to complexity"), to be released in Rust 1.83.0
[1], Clippy now warns on `manual_c_str_literals` by default, e.g.:
error: manually constructing a nul-terminated string
--> rust/kernel/kunit.rs:21:13
|
21 | b"\x013%pA\0".as_ptr() as _,
| ^^^^^^^^^^^^^ help: use a `c""` literal: `c"\x013%pA"`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#manual_c_str_literals
= note: `-D clippy::manual-c-str-literals` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::manual_c_str_literals)]`
Apply the suggestion to clean up the warnings.
Link: https://github.com/rust-lang/rust-clippy/pull/13263 [1]
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240927164414.560906-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
In case CONFIG_PREEMPT_RT is enabled __mutex_init() becomes a macro
instead of an extern function (simplified from
include/linux/mutex.h):
#ifndef CONFIG_PREEMPT_RT
extern void __mutex_init(struct mutex *lock, const char *name,
struct lock_class_key *key);
#else
#define __mutex_init(mutex, name, key) \
do { \
rt_mutex_base_init(&(mutex)->rtmutex); \
__mutex_rt_init((mutex), name, key); \
} while (0)
#endif
The macro isn't resolved by bindgen, then. What results in a build
error:
error[E0425]: cannot find function `__mutex_init` in crate `bindings`
--> rust/kernel/sync/lock/mutex.rs:104:28
|
104 | unsafe { bindings::__mutex_init(ptr, name, key) }
| ^^^^^^^^^^^^ help: a function with a similar name exists: `__mutex_rt_init`
|
::: rust/bindings/bindings_generated.rs:23722:5
|
23722 | / pub fn __mutex_rt_init(
23723 | | lock: *mut mutex,
23724 | | name: *const core::ffi::c_char,
23725 | | key: *mut lock_class_key,
23726 | | );
| |_____- similarly named function `__mutex_rt_init` defined here
Fix this by adding a helper.
As explained by Gary Guo in [1] no #ifdef CONFIG_PREEMPT_RT
is needed here as rust/bindings/lib.rs prefers externed function to
helpers if an externed function exists.
Reported-by: Conor Dooley <conor@kernel.org>
Link: https://lore.kernel.org/rust-for-linux/20240913-shack-estate-b376a65921b1@spud/
Link: https://lore.kernel.org/rust-for-linux/20240915123626.1a170103.gary@garyguo.net/ [1]
Fixes: 6d20d629c6d8 ("rust: lock: introduce `Mutex`")
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240916073752.3123484-1-dirk.behme@de.bosch.com
[ Reworded to include the proper example by Dirk. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
We use const helpers in form of
const size_t RUST_CONST_HELPER_ARCH_SLAB_MINALIGN = ARCH_SLAB_MINALIGN;
to aid generation of constants by bindgen because it is otherwise a
macro definition of an expression and bindgen doesn't expand the
constant. The helpers are then have `RUST_CONST_HELPER` prefix stripped
and exposed to Rust code as if `ARCH_SLAB_MISALIGN` is generated
natively by bindgen.
This works well for most constants, but on RISC-V, `ARCH_SLAB_MINALIGN`
is defined directly as literal constant if `!CONFIG_MMU`, and bindgen
would generate `ARCH_SLAB_MINALIGN` directly, thus conflict with the
one generated through the helper.
To fix this, we simply need to block bindgen from generating directly
without going through helper.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409160804.eSg9zh1e-lkp@intel.com/
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Link: https://lore.kernel.org/r/20240916003347.1744345-1-gary@garyguo.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The `LockedBy::access` method only requires a shared reference to the
owner, so if we have shared access to the `LockedBy` from several
threads at once, then two threads could call `access` in parallel and
both obtain a shared reference to the inner value. Thus, require that
`T: Sync` when calling the `access` method.
An alternative is to require `T: Sync` in the `impl Sync for LockedBy`.
This patch does not choose that approach as it gives up the ability to
use `LockedBy` with `!Sync` types, which is okay as long as you only use
`access_mut`.
Cc: stable@vger.kernel.org
Fixes: 7b1f55e3a984 ("rust: sync: introduce `LockedBy`")
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240915-locked-by-sync-fix-v2-1-1a8d89710392@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Rust modules are intended to be sorted, thus do so.
This makes `rustfmtcheck` to pass again.
Fixes: 570172569238 ("Merge tag 'rust-6.12' of https://github.com/Rust-for-Linux/linux")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240926124751.345471-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Support 'MITIGATION_{RETHUNK,RETPOLINE,SLS}' (which cleans up
objtool warnings), teach objtool about 'noreturn' Rust symbols and
mimic '___ADDRESSABLE()' for 'module_{init,exit}'. With that, we
should be objtool-warning-free, so enable it to run for all Rust
object files.
- KASAN (no 'SW_TAGS'), KCFI and shadow call sanitizer support.
- Support 'RUSTC_VERSION', including re-config and re-build on
change.
- Split helpers file into several files in a folder, to avoid
conflicts in it. Eventually those files will be moved to the right
places with the new build system. In addition, remove the need to
manually export the symbols defined there, reusing existing
machinery for that.
- Relax restriction on configurations with Rust + GCC plugins to just
the RANDSTRUCT plugin.
'kernel' crate:
- New 'list' module: doubly-linked linked list for use with reference
counted values, which is heavily used by the upcoming Rust Binder.
This includes 'ListArc' (a wrapper around 'Arc' that is guaranteed
unique for the given ID), 'AtomicTracker' (tracks whether a
'ListArc' exists using an atomic), 'ListLinks' (the prev/next
pointers for an item in a linked list), 'List' (the linked list
itself), 'Iter' (an iterator over a 'List'), 'Cursor' (a cursor
into a 'List' that allows to remove elements), 'ListArcField' (a
field exclusively owned by a 'ListArc'), as well as support for
heterogeneous lists.
- New 'rbtree' module: red-black tree abstractions used by the
upcoming Rust Binder.
This includes 'RBTree' (the red-black tree itself), 'RBTreeNode' (a
node), 'RBTreeNodeReservation' (a memory reservation for a node),
'Iter' and 'IterMut' (immutable and mutable iterators), 'Cursor'
(bidirectional cursor that allows to remove elements), as well as
an entry API similar to the Rust standard library one.
- 'init' module: add 'write_[pin_]init' methods and the
'InPlaceWrite' trait. Add the 'assert_pinned!' macro.
- 'sync' module: implement the 'InPlaceInit' trait for 'Arc' by
introducing an associated type in the trait.
- 'alloc' module: add 'drop_contents' method to 'BoxExt'.
- 'types' module: implement the 'ForeignOwnable' trait for
'Pin<Box<T>>' and improve the trait's documentation. In addition,
add the 'into_raw' method to the 'ARef' type.
- 'error' module: in preparation for the upcoming Rust support for
32-bit architectures, like arm, locally allow Clippy lint for
those.
Documentation:
- https://rust.docs.kernel.org has been announced, so link to it.
- Enable rustdoc's "jump to definition" feature, making its output a
bit closer to the experience in a cross-referencer.
- Debian Testing now also provides recent Rust releases (outside of
the freeze period), so add it to the list.
MAINTAINERS:
- Trevor is joining as reviewer of the "RUST" entry.
And a few other small bits"
* tag 'rust-6.12' of https://github.com/Rust-for-Linux/linux: (54 commits)
kasan: rust: Add KASAN smoke test via UAF
kbuild: rust: Enable KASAN support
rust: kasan: Rust does not support KHWASAN
kbuild: rust: Define probing macros for rustc
kasan: simplify and clarify Makefile
rust: cfi: add support for CFI_CLANG with Rust
cfi: add CONFIG_CFI_ICALL_NORMALIZE_INTEGERS
rust: support for shadow call stack sanitizer
docs: rust: include other expressions in conditional compilation section
kbuild: rust: replace proc macros dependency on `core.o` with the version text
kbuild: rust: rebuild if the version text changes
kbuild: rust: re-run Kconfig if the version text changes
kbuild: rust: add `CONFIG_RUSTC_VERSION`
rust: avoid `box_uninit_write` feature
MAINTAINERS: add Trevor Gross as Rust reviewer
rust: rbtree: add `RBTree::entry`
rust: rbtree: add cursor
rust: rbtree: add mutable iterator
rust: rbtree: add iterator
rust: rbtree: add red-black tree implementation backed by the C version
...
|
|
Make it possible to use the Control Flow Integrity (CFI) sanitizer when
Rust is enabled. Enabling CFI with Rust requires that CFI is configured
to normalize integer types so that all integer types of the same size
and signedness are compatible under CFI.
Rust and C use the same LLVM backend for code generation, so Rust KCFI
is compatible with the KCFI used in the kernel for C. In the case of
FineIBT, CFI also depends on -Zpatchable-function-entry for rewriting
the function prologue, so we set that flag for Rust as well. The flag
for FineIBT requires rustc 1.80.0 or later, so include a Kconfig
requirement for that.
Enabling Rust will select CFI_ICALL_NORMALIZE_INTEGERS because the flag
is required to use Rust with CFI. Using select rather than `depends on`
avoids the case where Rust is not visible in menuconfig due to
CFI_ICALL_NORMALIZE_INTEGERS not being enabled. One disadvantage of
select is that RUST must `depends on` all of the things that
CFI_ICALL_NORMALIZE_INTEGERS depends on to avoid invalid configurations.
Alice has been using KCFI on her phone for several months, so it is
reasonably well tested on arm64.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Gatlin Newhouse <gatlin.newhouse@gmail.com>
Acked-by: Kees Cook <kees@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240801-kcfi-v2-2-c93caed3d121@google.com
[ Replaced `!FINEIBT` requirement with `!CALL_PADDING` to prevent
a build error on older Rust compilers. Fixed typo. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/phy/phy_device.c
2560db6ede1a ("net: phy: Fix missing of_node_put() for leds")
1dce520abd46 ("net: phy: Use for_each_available_child_of_node_scoped()")
https://lore.kernel.org/20240904115823.74333648@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/xilinx/xilinx_axienet.h
drivers/net/ethernet/xilinx/xilinx_axienet_main.c
858430db28a5 ("net: xilinx: axienet: Fix race in axienet_stop")
76abb5d675c4 ("net: xilinx: axienet: Add statistics support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With the `RUSTC_VERSION_TEXT` rebuild support in place, now proc macros
can depend on that instead of `core.o`.
This means that both the `core` and `macros` crates can be built in
parallel, and that touching `core.o` does not trigger a rebuild of the
proc macros.
This could be accomplished using the same approach as for `core`
(i.e. depending directly on `include/config/RUSTC_VERSION_TEXT`). However,
that is considered an implementation detail [1], and thus it is best
to avoid it. Instead, let fixdep find a string that we explicitly
write down in the source code for this purpose (like it is done for
`include/linux/compiler-version.h`), which we can easily do (unlike for
`core`) since this is our own source code.
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/rust-for-linux/CAK7LNAQBG0nDupXSgAAk-6nOqeqGVkr3H1RjYaqRJ1OxmLm6xA@mail.gmail.com/ [1]
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240902165535.1101978-5-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Now that `RUSTC_VERSION_TEXT` exists, use it to rebuild `core` when the
version text changes (which in turn will trigger a rebuild of all the
kernel Rust code).
This also applies to proc macros (which only work with the `rustc` that
compiled them), via the already existing dependency on `core.o`. That
is cleaned up in the next commit.
However, this does not cover host programs written in Rust, which is
the same case in the C side.
This is accomplished by referencing directly the generated file, instead
of using the `fixdep` header trick, since we cannot change the Rust
standard library sources. This is not too much of a burden, since it
only needs to be done for `core`.
Tested-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240902165535.1101978-4-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Like commit 0903b9e2a46c ("rust: alloc: eschew
`Box<MaybeUninit<T>>::write`"), but for the new `rbtree` and `alloc` code.
That is, `feature(new_uninit)` [1] got partially stabilized [2]
for Rust 1.82.0 (expected to be released on 2024-10-17), but it
did not include `Box<MaybeUninit<T>>::write`, which got split into
`feature(box_uninit_write)` [3].
To avoid relying on a new unstable feature, rewrite the `write` +
`assume_init` pair manually.
Link: https://github.com/rust-lang/rust/issues/63291 [1]
Link: https://github.com/rust-lang/rust/pull/129401 [2]
Link: https://github.com/rust-lang/rust/issues/129397 [3]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Matt Gilbride <mattgilbride@google.com>
Link: https://lore.kernel.org/r/20240904144229.18592-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Currently while defining `THIS_MODULE` symbol in `module!()`, the
pointer used to construct `ThisModule` is derived from an immutable
reference of `__this_module`, which means the pointer doesn't have
the provenance for writing, and that means any write to that pointer
is UB regardless of data races or not. However, the usage of
`THIS_MODULE` includes passing this pointer to functions that may write
to it (probably in unsafe code), and this will create soundness issues.
One way to fix this is using `addr_of_mut!()` but that requires the
unstable feature "const_mut_refs". So instead of `addr_of_mut()!`,
an extern static `Opaque` is used here: since `Opaque<T>` is transparent
to `T`, an extern static `Opaque` will just wrap the C symbol (defined
in a C compile unit) in an `Opaque`, which provides a pointer with
writable provenance via `Opaque::get()`. This fix the potential UBs
because of pointer provenance unmatched.
Reported-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Closes: https://rust-for-linux.zulipchat.com/#narrow/stream/x/topic/x/near/465412664
Fixes: 1fbde52bde73 ("rust: add `macros` crate")
Cc: stable@vger.kernel.org # 6.6.x: be2ca1e03965: ("rust: types: Make Opaque::get const")
Link: https://lore.kernel.org/r/20240828180129.4046355-1-boqun.feng@gmail.com
[ Fixed two typos, reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
This mirrors the entry API [1] from the Rust standard library on
`RBTree`. This API can be used to access the entry at a specific key and
make modifications depending on whether the key is vacant or occupied.
This API is useful because it can often be used to avoid traversing the
tree multiple times.
This is used by binder to look up and conditionally access or insert a
value, depending on whether it is there or not [2].
Link: https://doc.rust-lang.org/stable/std/collections/btree_map/enum.Entry.html [1]
Link: https://android-review.googlesource.com/c/kernel/common/+/2849906 [2]
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Matt Gilbride <mattgilbride@google.com>
Link: https://lore.kernel.org/r/20240822-b4-rbtree-v12-5-014561758a57@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add a cursor interface to `RBTree`, supporting the following use cases:
- Inspect the current node pointed to by the cursor, inspect/move to
it's neighbors in sort order (bidirectionally).
- Mutate the tree itself by removing the current node pointed to by the
cursor, or one of its neighbors.
Add functions to obtain a cursor to the tree by key:
- The node with the smallest key
- The node with the largest key
- The node matching the given key, or the one with the next larger key
The cursor abstraction is needed by the binder driver to efficiently
search for nodes and (conditionally) modify them, as well as their
neighbors [1].
Link: https://lore.kernel.org/rust-for-linux/20231101-rust-binder-v1-6-08ba9197f637@google.com/ [1]
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Matt Gilbride <mattgilbride@google.com>
Link: https://lore.kernel.org/r/20240822-b4-rbtree-v12-4-014561758a57@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add mutable Iterator implementation for `RBTree`,
allowing iteration over (key, value) pairs in key order. Only values are
mutable, as mutating keys implies modifying a node's position in the tree.
Mutable iteration is used by the binder driver during shutdown to
clean up the tree maintained by the "range allocator" [1].
Link: https://lore.kernel.org/rust-for-linux/20231101-rust-binder-v1-6-08ba9197f637@google.com/ [1]
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Matt Gilbride <mattgilbride@google.com>
Link: https://lore.kernel.org/r/20240822-b4-rbtree-v12-3-014561758a57@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
- Add Iterator implementation for `RBTree`, allowing
iteration over (key, value) pairs in key order.
- Add individual `keys()` and `values()` functions to iterate over keys
or values alone.
- Update doctests to use iteration instead of explicitly getting items.
Iteration is needed by the binder driver to enumerate all values in a
tree for oneway spam detection [1].
Link: https://lore.kernel.org/rust-for-linux/20231101-rust-binder-v1-17-08ba9197f637@google.com/ [1]
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Matt Gilbride <mattgilbride@google.com>
Link: https://lore.kernel.org/r/20240822-b4-rbtree-v12-2-014561758a57@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The rust rbtree exposes a map-like interface over keys and values,
backed by the kernel red-black tree implementation. Values can be
inserted, deleted, and retrieved from a `RBTree` by key.
This base abstraction is used by binder to store key/value
pairs and perform lookups, for example the patch
"[PATCH RFC 03/20] rust_binder: add threading support"
in the binder RFC [1].
Link: https://lore.kernel.org/rust-for-linux/20231101-rust-binder-v1-3-08ba9197f637@google.com/ [1]
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Matt Gilbride <mattgilbride@google.com>
Link: https://lore.kernel.org/r/20240822-b4-rbtree-v12-1-014561758a57@google.com
[ Updated link to docs.kernel.org. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add unified genphy_read_status function for C22 and C45
registers. Instead of having genphy_c22 and genphy_c45 methods, this
unifies genphy_read_status functions for C22 and C45.
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the unified read/write API for C22 and C45 registers. The
abstractions support access to only C22 registers now. Instead of
adding read/write_c45 methods specifically for C45, a new reg module
supports the unified API to access C22 and C45 registers with trait,
by calling an appropriate phylib functions.
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement AsRef<kernel::device::Device> trait for Device. A PHY driver
needs a reference to device::Device to call the firmware API.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Support phy_driver probe callback, used to set up device-specific
structures.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add rust equivalent to include/linux/sizes.h, makes code more
readable. Only SZ_*K that QT2025 PHY driver uses are added.
Make generated constants accessible with a proper type.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Upstream Rust's libs-api team has consensus for stabilizing some of
`feature(new_uninit)`, but not for `Box<MaybeUninit<T>>::write`. Instead,
we can use `MaybeUninit<T>::write`, so Rust for Linux can drop the
feature after stabilization. That will happen after merging, as the FCP
has completed [1].
This is required before stabilization because remaining-unstable API
will be divided into new features. This code doesn't know about those
yet. It can't: they haven't landed, as the relevant PR is blocked on
rustc's CI testing Rust-for-Linux without this patch.
[ The PR has landed [2] and will be released in Rust 1.82.0 (expected on
2024-10-17), so we could conditionally enable the new unstable feature
(`box_uninit_write` [3]) instead, but just for a single `unsafe` block
it is probably not worth it. For the time being, I added it to the
"nice to have" section of our unstable features list. - Miguel ]
Link: https://github.com/rust-lang/rust/issues/63291#issuecomment-2183022955 [1]
Link: https://github.com/rust-lang/rust/pull/129416 [2]
Link: https://github.com/rust-lang/rust/issues/129397 [3]
Signed-off-by: Jubilee Young <workingjubilee@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
[ Reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
In Rust 1.56.0 [1], rustdoc introduced the "jump to definition"
feature [2], i.e. the unstable flag `--generate-link-to-definition`.
It adds links to the source view of the documentation.
For instance, in the source view of `rust/kernel/sync.rs`, for this code:
impl Default for LockClassKey {
fn default() -> Self {
Self::new()
}
}
It will add three hyperlinks:
- `Default` points to the rendered "Trait `core::default::Default`"
page (not the source view, since it goes to another crate, though
this may change).
- `LockClassKey` points to the `pub struct LockClassKey(...);` line
in the same page, highlighting the line number.
- `Self::new()` points to the `pub const fn new() -> Self { ... }`
associated function, highlighting its line numbers (i.e. for the
full function).
This makes the source view more useful and a bit closer to the experience
in e.g. the Elixir Cross Referencer [3].
I have provisionally enabled it for rust.docs.kernel.org [4] -- one can
take a look at the source view there for an example of how it looks like.
Thus enable it.
Cc: Guillaume Gomez <guillaume1.gomez@gmail.com>
Link: https://github.com/rust-lang/rust/pull/84176 [1]
Link: https://github.com/rust-lang/rust/issues/89095 [2]
Link: https://elixir.bootlin.com [3]
Link: https://rust.docs.kernel.org [4]
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240818141249.387166-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add a method for `ARef` that is analogous to `Arc::into_raw`. It is the
inverse operation of `ARef::from_raw`, and allows you to convert the
`ARef` back into a raw pointer while retaining ownership of the
refcount.
This new function will be used by [1] for converting the type in an
`ARef` using `ARef::from_raw(ARef::into_raw(me).cast())`. Alice has
also needed the same function for other use-cases in the past, but [1]
is the first to go upstream.
This was implemented independently by Kartik and Alice. The two versions
were merged by Alice, so all mistakes are Alice's.
Link: https://lore.kernel.org/r/20240801-vma-v3-1-db6c1c0afda9@google.com [1]
Link: https://github.com/Rust-for-Linux/linux/issues/1044
Signed-off-by: Kartik Prajapati <kartikprajapati987@gmail.com>
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
[ Reworded to correct the author reference and changed tag to Link
since it is not a bug. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Use links to docs.kernel.org instead of www.kernel.org/doc/html/latest
in the code documentation. The links are shorter and cleaner.
Link: https://github.com/Rust-for-Linux/linux/issues/1101
Signed-off-by: Michael Vetter <jubalh@iodoru.org>
[ Reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
One way to explain what `ListArc` does is that it controls exclusive
access to the prev/next pointer field in a refcounted object. The
feature of having a special reference to a refcounted object with
exclusive access to specific fields is useful for other things, so
provide a general utility for that.
This is used by Rust Binder to keep track of which processes have a
reference to a given node. This involves an object for each process/node
pair, that is referenced by both the process and the node. For some
fields in this object, only the process's reference needs to access
them (and it needs mutable access), so Binder uses a ListArc to give the
process's reference exclusive access.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240814-linked-list-v5-10-f5f5e8075da0@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Support linked lists that can hold many different structs at once. This
is generally done using trait objects. The main challenge is figuring
what the struct is given only a pointer to the ListLinks.
We do this by storing a pointer to the struct next to the ListLinks
field. The container_of operation will then just read that pointer. When
the type is a trait object, that pointer will be a fat pointer whose
metadata is a vtable that tells you what kind of struct it is.
Heterogeneous lists are heavily used by Rust Binder. There are a lot of
so-called todo lists containing various events that need to be delivered
to userspace next time userspace calls into the driver. And there are
quite a few different todo item types: incoming transaction, changes to
refcounts, death notifications, and more.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240814-linked-list-v5-9-f5f5e8075da0@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The cursor is very similar to the list iterator, but it has one
important feature that the iterator doesn't: it can be used to remove
items from the linked list.
This feature cannot be added to the iterator because the references you
get from the iterator are considered borrows of the original list,
rather than borrows of the iterator. This means that there's no way to
prevent code like this:
let item = iter.next();
iter.remove();
use(item);
If `iter` was a cursor instead of an iterator, then `item` will be
considered a borrow of `iter`. Since `remove` destroys `iter`, this
means that the borrow-checker will prevent uses of `item` after the call
to `remove`.
So there is a trade-off between supporting use in traditional for loops,
and supporting removal of elements as you iterate. Iterators and cursors
represents two different choices on that spectrum.
Rust Binder needs cursors for the list of death notifications that a
process is currently handling. When userspace tells Binder that it has
finished processing the death notification, Binder will iterate the list
to search for the relevant item and remove it.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240814-linked-list-v5-8-f5f5e8075da0@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
