summaryrefslogtreecommitdiff
path: root/sound/usb
AgeCommit message (Collapse)AuthorFilesLines
2024-11-08ALSA: usb-audio: Add quirks for Dell WD19 dockJan Schär1-0/+3
commit 4413665dd6c528b31284119e3571c25f371e1c36 upstream. The WD19 family of docks has the same audio chipset as the WD15. This change enables jack detection on the WD19. We don't need the dell_dock_mixer_init quirk for the WD19. It is only needed because of the dell_alc4020_map quirk for the WD15 in mixer_maps.c, which disables the volume controls. Even for the WD15, this quirk was apparently only needed when the dock firmware was not updated. Signed-off-by: Jan Schär <jan@jschaer.ch> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20241029221249.15661-1-jan@jschaer.ch Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-22ALSA: scarlett2: Add error check after retrieving PEQ filter valuesZhu Jun1-0/+2
commit fd5f14c126a65f27ada3f192b982c6797cc302c7 upstream. Add error check after retrieving PEQ filter values in scarlett2_update_filter_values that ensure function returns error if PEQ filter value retrieval fails. Fixes: b64678eb4e70 ("ALSA: scarlett2: Add DSP controls") Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20241009092305.8570-1-zhujun2@cmss.chinamobile.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-10ALSA: line6: add hw monitor volume control to POD HD500XHans P. Moller1-1/+1
commit 703235a244e533652346844cfa42623afb36eed1 upstream. Add hw monitor volume control for POD HD500X. This is done adding LINE6_CAP_HWMON_CTL to the capabilities Signed-off-by: Hans P. Moller <hmoller@uc.cl> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20241003232828.5819-1-hmoller@uc.cl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-10ALSA: usb-audio: Add native DSD support for Luxman D-08uJan Lalinsky1-0/+2
commit 6b0bde5d8d4078ca5feec72fd2d828f0e5cf115d upstream. Add native DSD support for Luxman D-08u DAC, by adding the PID/VID 1852:5062. This makes DSD playback work, and also sound quality when playing PCM files is improved, crackling sounds are gone. Signed-off-by: Jan Lalinsky <lalinsky@c4.cz> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20241003030811.2655735-1-lalinsky@c4.cz Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-10ALSA: usb-audio: Add delay quirk for VIVO USB-C HEADSETLianqin Hu1-0/+2
commit 73385f3e0d8088b715ae8f3f66d533c482a376ab upstream. Audio control requests that sets sampling frequency sometimes fail on this card. Adding delay between control messages eliminates that problem. Signed-off-by: Lianqin Hu <hulianqin@vivo.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/TYUPR06MB62177E629E9DEF2401333BF7D2692@TYUPR06MB6217.apcprd06.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-10ALSA: usb-audio: Add logitech Audio profile quirkJoshua Pius1-0/+6
[ Upstream commit a51c925c11d7b855167e64b63eb4378e5adfc11d ] Specify shortnames for the following Logitech Devices: Rally bar, Rally bar mini, Tap, MeetUp and Huddle. Signed-off-by: Joshua Pius <joshuapius@chromium.org> Link: https://patch.msgid.link/20240912152635.1859737-1-joshuapius@google.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-10ALSA: usb-audio: Add mixer quirk for RME Digiface USBAsahi Lina2-0/+414
[ Upstream commit 611a96f6acf2e74fe28cb90908a9c183862348ce ] Implement sync, output format, and input status mixer controls, to allow the interface to be used as a straight ADAT/SPDIF (+ Headphones) I/O interface. This does not implement the matrix mixer, output gain controls, or input level meter feedback. The full mixer interface is only really usable using a dedicated userspace control app (there are too many mixer nodes for alsamixer to be usable), so for now we leave it up to userspace to directly control these features using raw USB control messages. This is similar to how it's done with some FireWire interfaces (ffado-mixer). Signed-off-by: Asahi Lina <lina@asahilina.net> Link: https://patch.msgid.link/20240903-rme-digiface-v2-2-71b06c912e97@asahilina.net Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-10ALSA: usb-audio: Add quirk for RME Digiface USBCyan Nyan2-1/+228
[ Upstream commit c032044e9672408c534d64a6df2b1ba14449e948 ] Add trivial support for audio streaming on the RME Digiface USB. Binds only to the first interface to allow userspace to directly drive the complex I/O and matrix mixer controls. Signed-off-by: Cyan Nyan <cyan.vtb@gmail.com> [Lina: Added 2x/4x sample rate support & boot/format quirks] Co-developed-by: Asahi Lina <lina@asahilina.net> Signed-off-by: Asahi Lina <lina@asahilina.net> Link: https://patch.msgid.link/20240903-rme-digiface-v2-1-71b06c912e97@asahilina.net Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-10ALSA: usb-audio: Replace complex quirk lines with macrosTakashi Iwai1-1617/+593
[ Upstream commit d79e13f8e8abb5cd3a2a0f9fc9bc3fc750c5b06f ] Apply the newly introduced macros for reduce the complex expressions and cast in the quirk table definitions. It results in a significant code reduction, too. There should be no functional changes. Link: https://patch.msgid.link/20240814134844.2726-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-10ALSA: usb-audio: Define macros for quirk table entriesTakashi Iwai1-0/+77
[ Upstream commit 0c3ad39b791c2ecf718afcaca30e5ceafa939d5c ] Many entries in the USB-audio quirk tables have relatively complex expressions. For improving the readability, introduce a few macros. Those are applied in the following patch. Link: https://patch.msgid.link/20240814134844.2726-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-10ALSA: usb-audio: Add input value sanity checks for standard typesTakashi Iwai2-8/+28
[ Upstream commit 901e85677ec0bb9a69fb9eab1feafe0c4eb7d07e ] For an invalid input value that is out of the given range, currently USB-audio driver corrects the value silently and accepts without errors. This is no wrong behavior, per se, but the recent kselftest rather wants to have an error in such a case, hence a different behavior is expected now. This patch adds a sanity check at each control put for the standard mixer types and returns an error if an invalid value is given. Note that this covers only the standard mixer types. The mixer quirks that have own control callbacks would need different coverage. Link: https://patch.msgid.link/20240806124651.28203-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-14ALSA: usb-audio: Support Yamaha P-125 quirk entryJuan José Arboleda1-0/+1
This patch adds a USB quirk for the Yamaha P-125 digital piano. Signed-off-by: Juan José Arboleda <soyjuanarbol@gmail.com> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20240813161053.70256-1-soyjuanarbol@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-08-12ALSA: usb-audio: Add delay quirk for VIVO USB-C-XE710 HEADSETLianqin Hu1-0/+2
Audio control requests that sets sampling frequency sometimes fail on this card. Adding delay between control messages eliminates that problem. Signed-off-by: Lianqin Hu <hulianqin@vivo.com> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/TYUPR06MB6217FF67076AF3E49E12C877D2842@TYUPR06MB6217.apcprd06.prod.outlook.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-08-08ALSA: usb-audio: Re-add ScratchAmp quirk entriesTakashi Iwai1-0/+4
At the code refactoring of USB-audio quirk handling, I assumed that the quirk entries of Stanton ScratchAmp devices were only about the device name, and moved them completely into the rename table. But it seems that the device requires the quirk entry so that it's probed by the driver itself. This re-adds back the quirk entries of ScratchAmp, but in a minimalistic manner. Fixes: 5436f59bc5bc ("ALSA: usb-audio: Move device rename and profile quirks to an internal table") Link: https://patch.msgid.link/20240808081803.22300-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-08-05ALSA: line6: Fix racy access to midibufTakashi Iwai1-0/+5
There can be concurrent accesses to line6 midibuf from both the URB completion callback and the rawmidi API access. This could be a cause of KMSAN warning triggered by syzkaller below (so put as reported-by here). This patch protects the midibuf call of the former code path with a spinlock for avoiding the possible races. Reported-by: syzbot+78eccfb8b3c9a85fc6c5@syzkaller.appspotmail.com Closes: https://lore.kernel.org/00000000000000949c061df288c5@google.com Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20240805130129.10872-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-07-31ALSA: usb-audio: Correct surround channels in UAC1 channel mapTakashi Iwai1-2/+2
USB-audio driver puts SNDRV_CHMAP_SL and _SR as left and right surround channels for UAC1 channel map, respectively. But they should have been SNDRV_CHMAP_RL and _RR; the current value *_SL and _SR are rather "side" channels, not "surround". I guess I took those mistakenly when I read the spec mentioning "surround left". This patch corrects those entries to be the right channels. Suggested-by: Sylvain BERTRAND <sylvain.bertrand@legeek.net> Closes: https://lore.kernel.orgZ/qIyJD8lhd8hFhlC@freedom Fixes: 04324ccc75f9 ("ALSA: usb-audio: add channel map support") Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20240731142018.24750-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-07-22ALSA: usb-audio: Add a quirk for Sonix HD USB Camerawangdicheng1-0/+2
Sonix HD USB Camera does not support reading the sample rate which leads to many lines of "cannot get freq at ep 0x84". This patch adds the USB ID to quirks.c and avoids those error messages. (snip) [1.789698] usb 3-3: new high-speed USB device number 2 using xhci_hcd [1.984121] usb 3-3: New USB device found, idVendor=0c45, idProduct=6340, bcdDevice= 0.00 [1.984124] usb 3-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [1.984127] usb 3-3: Product: USB 2.0 Camera [1.984128] usb 3-3: Manufacturer: Sonix Technology Co., Ltd. [5.440957] usb 3-3: 3:1: cannot get freq at ep 0x84 [12.130679] usb 3-3: 3:1: cannot get freq at ep 0x84 [12.175065] usb 3-3: 3:1: cannot get freq at ep 0x84 Signed-off-by: wangdicheng <wangdicheng@kylinos.cn> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20240722084822.31620-1-wangdich9700@163.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-07-22ALSA: usb-audio: Move HD Webcam quirk to the right placeTakashi Iwai1-2/+2
The quirk_flags_table[] is sorted in the USB ID order, while the last fix was put at a wrong position. Adjust the entry at the right position. Fixes: 74dba2408818 ("ALSA: usb-audio: Fix microphone sound on HD webcam.") Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20240722080605.23481-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-07-19ALSA: usb-audio: Fix microphone sound on HD webcam.wangdicheng2-0/+9
I own an external usb Webcam, HD webcam, which had low mic volume and inconsistent sound quality. Video works as expected. (snip) [ 95.473820][ 1] [ T73] usb 5-2.2: new high-speed USB device number 7 using xhci_hcd [ 95.773974][ 1] [ T73] usb 5-2.2: New USB device found, idVendor=1bcf, idProduct=2281, bcdDevice= 0.05 [ 95.783445][ 1] [ T73] usb 5-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 95.791872][ 1] [ T73] usb 5-2.2: Product: HD webcam [ 95.797001][ 1] [ T73] usb 5-2.2: Manufacturer: Sunplus IT Co [ 95.802996][ 1] [ T73] usb 5-2.2: SerialNumber: 20200513 [ 96.092610][ 2] [ T3680] usb 5-2.2: Warning! Unlikely big volume range (=4096), cval->res is probably wrong. [ 96.102436][ 2] [ T3680] usb 5-2.2: [5] FU [Mic Capture Volume] ch = 1, val = 0/4096/1 Set up quirk cval->res to 16 for 256 levels, Set GET_SAMPLE_RATE quirk flag to stop trying to get the sample rate. Confirmed that happened anyway later due to the backoff mechanism, After 3 failures. All audio stream on device interfaces share the same values, apart from wMaxPacketSize and tSamFreq : bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 4 bNumEndpoints 1 bInterfaceClass 1 Audio Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 4 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 3 bDelay 1 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 11 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 1 bSubframeSize 2 bBitResolution 16 bSamFreqType 1 Discrete tSamFreq[ 0] 48000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0064 1x 100 bytes bInterval 4 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 0 Undefined wLockDelay 0x0000 (snip) Testing patch provides consistent good sound recording quality and volume range. (snip) [ 95.473820][ 1] [ T73] usb 5-2.2: new high-speed USB device number 7 using xhci_hcd [ 95.773974][ 1] [ T73] usb 5-2.2: New USB device found, idVendor=1bcf, idProduct=2281, bcdDevice= 0.05 [ 95.783445][ 1] [ T73] usb 5-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 95.791872][ 1] [ T73] usb 5-2.2: Product: HD webcam [ 95.797001][ 1] [ T73] usb 5-2.2: Manufacturer: Sunplus IT Co [ 95.802996][ 1] [ T73] usb 5-2.2: SerialNumber: 20200513 [ 96.110630][ 3] [ T3680] usbcore: registered new interface driver snd-usb-audio [ 96.114329][ 7] [ T3677] usb 5-2.2: Found UVC 1.00 device HD webcam (1bcf:2281) [ 96.167555][ 7] [ T3677] usbcore: registered new interface driver uvcvideo Signed-off-by: wangdicheng <wangdicheng@kylinos.cn> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20240719020906.8078-1-wangdich9700@163.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-07-15ALSA: usb: Use BIT() for bit valuesTakashi Iwai3-39/+36
Instead of the explicit "1 << x", use BIT() macro for one bit values. This will improve the readability and also avoids the possible bad value for 31bit shift. Link: https://patch.msgid.link/20240715123646.26679-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-07-15ALSA: usb: Fix UBSAN warning in parse_audio_unit()Takashi Iwai1-0/+7
A malformed USB descriptor may pass the lengthy mixer description with a lot of channels, and this may overflow the 32bit integer shift size, as caught by syzbot UBSAN test. Although this won't cause any real trouble, it's better to address. This patch introduces a sanity check of the number of channels to bail out the parsing when too many channels are found. Reported-by: syzbot+78d5b129a762182225aa@syzkaller.appspotmail.com Closes: https://lore.kernel.org/0000000000000adac5061d3c7355@google.com Link: https://patch.msgid.link/20240715123619.26612-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-05-16ALSA: usb-audio: Fix for sampling rates support for Mbox3Manuel Barrio Linares1-2/+2
Fixed wrong use of usb_sndctrlpipe to usb_rcvctrlpipe Fixes: 44f69ddccb66 ("ALSA: usb-audio: Add sampling rates support for Mbox3") Signed-off-by: Manuel Barrio Linares <mbarriolinares@gmail.com> Link: https://lore.kernel.org/r/20240516134003.39104-1-mbarriolinares@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-05-12ALSA: scarlett2: Increase mixer range to +12dBGeoffrey D. Bennett1-4/+5
The values loaded into the mixer are 16-bit values, with 8192 representing 0dB, going up to a current maximum of 16345 (+6dB). All supported interfaces have no problem going up to 32612 (+12dB), so update SCARLETT2_MIXER_MAX_DB and scarlett2_mixer_values[] to allow for this. Tested with: - Scarlett 2nd Gen 6i6, 18i8, 18i20 - Scarlett 3rd Gen 4i4, 8i6, 18i8, 18i20 - Scarlett 4th Gen Solo, 2i2, 4i4 - Clarett+ 2Pre, 4Pre, 8Pre - Vocaster One and Two Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/Zj+gYT4F2XeKTD93@m.b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-05-12ALSA: scarlett2: Add S/PDIF source selection controlsGeoffrey D. Bennett1-0/+179
Add S/PDIF Source/Digital I/O Mode selection controls for the Scarlett 3rd Gen 18i8/18i20 and Clarett 4Pre/8Pre interfaces. These models have both coax S/PDIF and optical inputs, and the optical inputs are switchable between being used as S/PDIF and ADAT inputs. The Scarlett 3rd Gen 18i20 also has a "Dual ADAT" mode for 8-channel audio at 88.2/96kHz. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/Zj8zCTjzPsTDENN+@m.b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-05-09ALSA: usb-audio: Add name for HP Engage Go dockSteven 'Steve' Kendall1-0/+4
This dock previously presented as 'generic USB Audio'. UCM may now be applied specific to this dock. Signed-off-by: Steven 'Steve' Kendall <skend@chromium.org> Link: https://lore.kernel.org/r/20240508-usb-audio-hp-engage-go-dock-v1-1-9e2984d49e63@chromium.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-05-08ALSA: usb: Use *-y instead of *-objs in MakefileTakashi Iwai5-7/+7
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20240507135513.14919-6-tiwai@suse.de
2024-05-08ALSA: usb-audio: Add sampling rates support for Mbox3Manuel Barrio Linares2-31/+81
This adds support for all sample rates supported by the hardware,Digidesign Mbox 3 supports: {44100, 48000, 88200, 96000} Fixes syncing clock issues that presented as pops. To test this, without this patch playing 440hz tone produces pops. Clock is now synced between playback and capture interfaces so no more latency drift issue when using pipewire pro-profile. (https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/3900) Signed-off-by: Manuel Barrio Linares <mbarriolinares@gmail.com> Link: https://lore.kernel.org/r/20240430171020.192285-1-mbarriolinares@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-04-21ALSA: scarlett2: Zero initialize ret in scarlett2_ag_target_ctl_get()Nathan Chancellor1-1/+1
Clang warns (or errors with CONFIG_WERROR): sound/usb/mixer_scarlett2.c:3697:6: error: variable 'err' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] 3697 | if (private->autogain_updated) { | ^~~~~~~~~~~~~~~~~~~~~~~~~ sound/usb/mixer_scarlett2.c:3707:9: note: uninitialized use occurs here 3707 | return err; | ^~~ sound/usb/mixer_scarlett2.c:3697:2: note: remove the 'if' if its condition is always true 3697 | if (private->autogain_updated) { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sound/usb/mixer_scarlett2.c:3688:9: note: initialize the variable 'err' to silence this warning 3688 | int err; | ^ | = 0 1 error generated. Initialize ret to zero to ensure ret is initialized in all paths within scarlett2_ag_target_ctl_get(), which matches the style of other functions in this driver. Fixes: e30ea5340c25 ("ALSA: scarlett2: Add autogain target controls") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Message-ID: <20240419-alsa-scarlett2-fix-wsometimes-uninitialized-v1-1-e2ace8642e08@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-04-18ALSA: scarlett2: Add Bluetooth volume control for Vocaster TwoGeoffrey D. Bennett1-0/+156
The Vocaster Two has a Bluetooth module with a volume control. Add a corresponding ALSA mixer control. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <b78687f7243142a4466f63c0aee9742b44ee395d.1710264833.git.g@b4.vu>
2024-04-18ALSA: scarlett2: Add autogain target controlsGeoffrey D. Bennett1-0/+207
The Scarlett 4th Gen and Vocaster interfaces allow the autogain target dBFS value(s) to be configured. Add Mean and Peak Target controls for 4th Gen, and a Hot Target control for Vocaster. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <33d7f6dc965ab09522361ec99745a0685e4b8272.1710264833.git.g@b4.vu>
2024-04-18ALSA: scarlett2: Add support for Focusrite Vocaster One and TwoGeoffrey D. Bennett2-4/+165
Add Focusrite Vocaster One and Two USB IDs, notification arrays, config sets, and device info data. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <5fb48555a8db7bb322b25784b165829357cd6e42.1710264833.git.g@b4.vu>
2024-04-18ALSA: scarlett2: Add DSP controlsGeoffrey D. Bennett1-0/+855
Add filter and compressor DSP controls for the Vocaster interfaces. Mark scarlett2_notify_input_dsp() as __always_unused until it gets used when the Vocaster callback function array is added. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <a45316f79600b862dae38da24f13def638b06476.1710264833.git.g@b4.vu>
2024-04-18ALSA: scarlett2: Add input mute controlsGeoffrey D. Bennett1-1/+141
Add controls for the input mute switches that the Vocaster interfaces have. Mark scarlett2_notify_input_mute() as __always_unused until it gets used when the Vocaster callback function array is added. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <3b384b4e759241bd06f0c223e9f4f00467d88318.1710264833.git.g@b4.vu>
2024-04-18ALSA: scarlett2: Define autogain status texts per-config-setGeoffrey D. Bennett1-7/+25
The autogain status texts are different for Vocaster vs. Scarlett 4th Gen, so make them configurable per-config-set. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <b1adcd3dc48117d4ebe16812eeb7f1dbf1ede472.1710264833.git.g@b4.vu>
2024-04-18ALSA: scarlett2: Define the maximum preamp input gain per-config-setGeoffrey D. Bennett1-8/+12
Remove the #define SCARLETT2_MAX_GAIN_DB and replace with a per-config-set TLV as the Vocaster has a maximum gain of 70dB vs the 4th Gen 69dB. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <ade8e18ce38927ea0224946ec7cfea23ad3793d8.1710264833.git.g@b4.vu>
2024-04-18ALSA: scarlett2: Add additional input configuration parametersGeoffrey D. Bennett1-56/+80
The 4th Gen Scarlett interfaces added software-controllable input gain along with channel select, channel link, auto-gain, and "safe" mode. Vocaster has software-controllable input gain and auto-gain but not channel select, channel link, or safe mode. Add a device info field safe_input_count to indicate how many channels have a safe mode control, and use the presence of the input select and input link switch configuration parameters to determine if those controls should be created. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <167f04a37d0fb23f3077705df835adbc4f2b6a8e.1710264833.git.g@b4.vu>
2024-04-18ALSA: scarlett2: Add support for config items with size = 32Geoffrey D. Bennett1-1/+6
Update scarlett2_usb_get_config() to support 32-bit values which are needed by the upcoming Vocaster support. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <ee35dce0172b2aa3fec8163ab8f35bdc35a141bd.1710264833.git.g@b4.vu>
2024-04-18ALSA: scarlett2: Add pbuf field to struct scarlett2_configGeoffrey D. Bennett1-39/+46
scarlett2_usb_set_config() was using size = 0 as a signal to use the parameter buffer. Replace that with an explicit indication (pbuf = 1), as the upcoming Vocaster support has a config item written via the parameter buffer with size = 1 rather than the implicit size of 8. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <50a7d85bb04f9a7f13f667c70a706826c8d3ef93.1710264833.git.g@b4.vu>
2024-04-18ALSA: scarlett2: Rename gen4_write_addr to param_buf_addrGeoffrey D. Bennett1-19/+18
The location pointed to by gen4_write_addr and gen4_write_addr + 1 is officially known as the parameter buffer. Update the code to match. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <aa36ecb8d3ce67387b5edf6c900f0b8a509241ce.1710264833.git.g@b4.vu>
2024-04-18ALSA: scarlett2: Add support for reading from flashGeoffrey D. Bennett1-4/+84
Add hwdep read op so flash segments can be read. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <800d20a801e8c59c2905c82ecae5676cd4f31429.1710264833.git.g@b4.vu>
2024-04-18ALSA: scarlett2: Implement handling of the ACK notificationGeoffrey D. Bennett1-9/+61
After scarlett2_usb() sends a command, it seems that we should wait for an ACK before attempting to read the response. Not doing that didn't seem necessary previously but seems to be causing occasional issues with 4th Gen devices. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <452d1263c40fa8eba1cfb24e2055e40a84cbc437.1710264833.git.g@b4.vu>
2024-04-18ALSA: scarlett2: Move initialisation code lower in the sourceGeoffrey D. Bennett1-387/+390
So that more forward declarations won't be required when we add handling of the ACK notification, move the initialisation functions to after the notification functions. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <0922071cb8be99a2394705de27b917d1e4e46f3f.1710264833.git.g@b4.vu>
2024-04-02ALSA: line6: Zero-initialize message buffersTakashi Iwai1-3/+3
For shutting up spurious KMSAN uninit-value warnings, just replace kmalloc() calls with kzalloc() for the buffers used for communications. There should be no real issue with the original code, but it's still better to cover. Reported-by: syzbot+7fb05ccf7b3d2f9617b3@syzkaller.appspotmail.com Closes: https://lore.kernel.org/r/00000000000084b18706150bcca5@google.com Message-ID: <20240402063628.26609-1-tiwai@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-03-17Revert "ALSA: usb-audio: Name feature ctl using output if input is PCM"Takashi Iwai1-35/+14
This reverts commit 1601cd53c7e3197181277326dbfc131d20a74e46. This fix is applied globally to all devices, and it may change the existing control names. When the devices are managed with the fixed configuration like UCM, such control name mismatch may lead to significant regressions. For avoiding that kind of regression, we would need to apply such changes conditionally, but it'd take time to settle down. While the original fix is a good thing in general, in order to address the regression, let's revert the change for now. Link: https://bugzilla.kernel.org/show_bug.cgi?id=218605 Reported-and-tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com> Message-ID: <20240316083744.28126-1-tiwai@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-03-13ALSA: usb-audio: Stop parsing channels bits when all channels are found.Johan Carlsson1-1/+4
If a usb audio device sets more bits than the amount of channels it could write outside of the map array. Signed-off-by: Johan Carlsson <johan.carlsson@teenage.engineering> Fixes: 04324ccc75f9 ("ALSA: usb-audio: add channel map support") Message-ID: <20240313081509.9801-1-johan.carlsson@teenage.engineering> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-03-11ALSA: scarlett2: Fix Scarlett 4th Gen input gain range againGeoffrey D. Bennett1-4/+7
The 4th Gen input preamp gain range is 0dB to +69dB, although the control values range from 0 to 70. Replace SCARLETT2_MAX_GAIN with SCARLETT2_MAX_GAIN_VALUE and SCARLETT2_MAX_GAIN_DB, and update the TLV again. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Fixes: a45cf0a08347 ("ALSA: scarlett2: Fix Scarlett 4th Gen input gain range") Message-ID: <Ze7OMA8ntG7KteGa@m.b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-03-11ALSA: scarlett2: Fix Scarlett 4th Gen input gain rangeGeoffrey D. Bennett1-3/+5
The input gain range TLV was declared as -70dB to 0dB, but the preamp gain range is actually 0dB to +70dB. Rename SCARLETT2_GAIN_BIAS to SCARLETT2_MAX_GAIN and update the TLV to fix. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Fixes: 0a995e38dc44 ("ALSA: scarlett2: Add support for software-controllable input gain") Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <9168317b5ac5335943d3f14dbcd1cc2d9b2299d0.1710047969.git.g@b4.vu>
2024-03-11ALSA: scarlett2: Fix Scarlett 4th Gen autogain status valuesGeoffrey D. Bennett1-28/+34
The meanings of the raw_auto_gain_status values were originally guessed through experimentation, but the official names have now been discovered. Update the autogain status control strings accordingly. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Fixes: 0a995e38dc44 ("ALSA: scarlett2: Add support for software-controllable input gain") Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <8bd12a5e7dc714801dd9887c4bc5cb35c384e27c.1710047969.git.g@b4.vu>
2024-03-11ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detectionGeoffrey D. Bennett1-8/+7
The value currently being read to determine the low-voltage state is actually the front panel state. Fix the code to use the correct offset for the low-voltage state. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Fixes: d7cfa2fdfc8a ("ALSA: scarlett2: Add power status control") Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <d97b7d87f43b0e54f37e1552394be2f3ae182704.1710047969.git.g@b4.vu>
2024-03-04ALSA: usb-audio: Name feature ctl using output if input is PCMKenny Levinsen1-14/+35
When building feature controls from a unit without a name, we try to derive a name first from the feature unit's input, then fall back to the output terminal. If a feature unit connects directly to a "USB Streaming" input terminal rather than a mixer or other virtual type, the control receives the somewhat meaningless name "PCM", even if the output had a descriptive type such as "Headset" or "Speaker". Here is an example of such AudioControl descriptor from a USB headset which ends up named "PCM Playback" and is therefore not recognized as headphones by userspace: AudioControl Interface Descriptor: bLength 12 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 4 wTerminalType 0x0101 USB Streaming bAssocTerminal 5 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 5 wTerminalType 0x0402 Headset bAssocTerminal 4 bSourceID 6 iTerminal 0 AudioControl Interface Descriptor: bLength 13 bDescriptorType 36 bDescriptorSubtype 6 (FEATURE_UNIT) bUnitID 6 bSourceID 4 bControlSize 2 bmaControls(0) 0x0002 Volume Control bmaControls(1) 0x0000 bmaControls(2) 0x0000 iFeature 0 Other headsets and DACs I tried that used their output terminal for naming only did so due to their input being an unnamed sidetone mixer. Instead of always starting with the input terminal, check the type of it first. If it seems uninteresting, invert the order and use the output terminal first for naming. This makes userspace recognize headsets with simple controls as headphones, and leads to more consistent naming of playback devices based on their outputs irrespective of sidetone mixers. Signed-off-by: Kenny Levinsen <kl@kl.wtf> Link: https://lore.kernel.org/r/20240301231107.42679-1-kl@kl.wtf Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-31 09:48:11 +0000