| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Previously inject->is_pipe was set if the input or output were a
pipe. Determining the input was a pipe had to be done prior to
starting the session and opening the file. This was done by comparing
the input file name with '-' but it fails if the pipe file is written
to disk.
Opening a pipe file from disk will correctly set perf_data.is_pipe, but
this is too late for 'perf inject' and results in a broken file. A
workaround is 'cat pipe_perf|perf inject -i - ...'.
This change removes inject->is_pipe and changes the dependent
conditions to use the is_pipe flag on the input
(inject->session->data) and output files (inject->output). This
ensures the is_pipe condition reflects things like the header being
read.
The change removes the use of perf file header repiping, that is
writing the file header out while reading it in. The case of input
pipe and output file cannot repipe as the attributes for the file are
unknown. To resolve this, write the file header when writing to disk
and as the attributes may be unknown, write them after the data.
Update sessions repipe variable to be trace_event_repipe as those are
the only events now impacted by it. Update __perf_session__new as the
repipe_fd no longer needs passing. Fully removing repipe from session
header reading will be done in a later change.
Committer testing:
root@number:~# perf record -e syscalls:sys_enter_*sleep/max-stack=4/ -o - sleep 0.01 | perf report -i -
# To display the perf.data header info, please use --header/--header-only options.
#
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.050 MB - ]
#
# Total Lost Samples: 0
#
# Samples: 1 of event 'syscalls:sys_enter_clock_nanosleep'
# Event count (approx.): 1
#
# Overhead Command Shared Object Symbol
# ........ ....... ............. ...............................
#
100.00% sleep libc.so.6 [.] clock_nanosleep@GLIBC_2.2.5
|
---__libc_start_main@@GLIBC_2.34
__libc_start_call_main
0x562fc2560a9f
clock_nanosleep@GLIBC_2.2.5
#
# (Tip: Create an archive with symtabs to analyse on other machine: perf archive)
#
root@number:~# perf record -e syscalls:sys_enter_*sleep/max-stack=4/ -o - sleep 0.01 > pipe.data
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.050 MB - ]
root@number:~# perf report --stdio -i pipe.data
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 1 of event 'syscalls:sys_enter_clock_nanosleep'
# Event count (approx.): 1
#
# Overhead Command Shared Object Symbol
# ........ ....... ............. ...............................
#
100.00% sleep libc.so.6 [.] clock_nanosleep@GLIBC_2.2.5
|
---__libc_start_main@@GLIBC_2.34
__libc_start_call_main
0x55f775975a9f
clock_nanosleep@GLIBC_2.2.5
#
# (Tip: To set sampling period of individual events use perf record -e cpu/cpu-cycles,period=100001/,cpu/branches,period=10001/ ...)
#
root@number:~#
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240829150154.37929-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
With a file, to write data an offset needs to be known. Typically data
follows the event attributes in a file.
However, if processing a pipe the number of event attributes may not be
known.
It is convenient in that case to write the attributes after the data.
Expand perf_session__do_write_header() to allow this when the data
offset and size are known.
This approach may be useful for more than just taking a pipe file to
write into a data file, `perf inject --itrace` will reserve and
additional 8kb for attributes, which would be unnecessary if the
attributes were written after the data.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240829150154.37929-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Buggy perf.data files can have the attributes and data
overlapping.
For example, when processing pipe data the attributes aren't known and
so file offset header calculations can consider them not present.
Later this can cause the attributes to overwrite the data. This can be
seen in:
$ perf record -o - true > a.data
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.059 MB - ]
$ perf inject -i a.data -o b.data
$ perf report --stats -i b.data
0x68 [0]: failed to process type: 510379 [Invalid argument]
Error:
failed to process sample
$
This change makes reading the corrupt file fail:
$ perf report --stats -i b.data
Perf file header corrupt: Attributes and data overlap
incompatible file format (rerun with -v to learn more)
$
Which is more informative.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240829150154.37929-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Some of the values are a little strange so add documentation to
resolve ambiguity.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240829150154.37929-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf_session is a central data structure to the tool so let's comment
it. The auxtrace callbacks are never modified in session so constify.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240829150154.37929-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now that we have overlapping trace IDs it's also useful to know what the
queue number is to be able to distinguish the source of the trace so
print it inline. Hide it behind the -v option because it might not be
obvious to users what the queue number is.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240722101202.26915-8-james.clark@linaro.org
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
v0.1 HW_ID packets have a new field that describes which sink each CPU
writes to. Use the sink ID to link trace ID maps to each other so that
mappings are shared wherever the sink is shared.
Also update the error message to show that overlapping IDs aren't an
error in per-thread mode, just not supported. In the future we can
use the CPU ID from the AUX records, or watch for changing sink IDs on
HW_ID packets to use the correct decoders.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240722101202.26915-7-james.clark@linaro.org
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now that each queue has a unique set of trace ID mappings, use this
list to create the decoders. In unformatted mode just add a single
mapping so only one decoder is made.
Previously each queue would have a decoder created for each traced CPU
on the system but this won't work anymore because CPUs can have
overlapping trace IDs.
This also means that the CORESIGHT_TRACE_ID_UNUSED_FLAG isn't needed
any more. If mappings aren't added then decoders aren't created, rather
than needing a flag to suppress creation.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240722101202.26915-5-james.clark@linaro.org
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The global list won't work for per-sink trace ID allocations, so put a
list in each queue where the IDs will be unique to that queue.
To keep the same behavior as before, for version 0 of the HW_ID packets,
copy all the HW_ID mappings into all queues.
This change doesn't effect the decoders, only trace ID lookups on the
Perf side. The decoders are still created with global mappings which
will be fixed in a later commit.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240722101202.26915-4-james.clark@linaro.org
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Make cs_etm__setup_queue() setup a queue even if it's empty, and
pre-allocate queues based on the max CPU that was recorded. In per-CPU
mode aux queues are indexed based on CPU ID even if all CPUs aren't
recorded, sparse queue arrays aren't used.
This will allow HW_IDs to be saved even if no aux data was received in
that queue without having to call cs_etm__setup_queue() from two
different places.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240722101202.26915-3-james.clark@linaro.org
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Both of these passes gather information about how to create the
decoders. AUX records determine formatted/unformatted, and the HW_IDs
determine the traceID/metadata mappings.
Therefore it makes sense to cache the information and wait until both
passes are over until creating the decoders, rather than creating them
at the first HW_ID found.
This will allow a simplification of the creation process where
cs_etm_queue->traceid_list will exclusively used to create the decoders,
rather than the current two methods depending on whether the trace is
formatted or not.
Previously the sample CPU from the AUX record was used to initialize
the decoder CPU, but actually sample CPU == AUX queue index in per-CPU
mode, so saving the sample CPU isn't required.
Similarly formatted/unformatted was used upfront to create the decoders,
but now it's cached until later.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240722101202.26915-2-james.clark@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The new cgroup filter can take either of '==' or '!=' operator and a
pathname for the target cgroup.
$ perf record -a --all-cgroups -e cycles --filter 'cgroup == /abc/def' -- sleep 1
Users should have --all-cgroups option in the command line to enable
cgroup filtering. Technically it doesn't need to have the option as
it can get the current task's cgroup info directly from BPF. But I want
to follow the convention for the other sample info.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240826221045.1202305-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The flex and bison files need to be recompiled when one of these header
filters are changed.
* util/bpf-filter.h
* util/bpf_skel/sample-filter.h
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240826221045.1202305-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The fields in the hist_entry are filled on-demand which means they only
have meaningful values when relevant sort keys are used.
So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in
the hist entry can be garbage. So it shouldn't access it
unconditionally.
I got a segfault, when I wanted to see cgroup profiles.
$ sudo perf record -a --all-cgroups --synth=cgroup true
$ sudo perf report -s cgroup
Program received signal SIGSEGV, Segmentation fault.
0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48
48 return RC_CHK_ACCESS(map)->dso;
(gdb) bt
#0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48
#1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344
#2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385
#3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true)
at util/hist.c:644
#4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0,
block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761
#5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0,
sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779
#6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015
#7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0)
at util/hist.c:1260
#8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0,
machine=0x5555560388e8) at builtin-report.c:334
#9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128,
sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232
#10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128,
sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271
#11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0,
file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354
#12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132
#13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245
#14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324
#15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342
#16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60)
at util/session.c:780
#17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688,
file_path=0x555556038ff0 "perf.data") at util/session.c:1406
As you can see the entry->ms.map was NULL even if he->ms.map has a
value. This is because 'sym' sort key is not given, so it cannot assume
whether he->ms.sym and entry->ms.sym is the same. I only checked the
'sym' sort key here as it implies 'dso' behavior (so maps are the same).
Fixes: ac01c8c4246546fd ("perf hist: Update hist symbol when updating maps")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Matt Fleming <matt@readmodwrite.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240826221045.1202305-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The 'pmu' pointer in the auxtrace_record structure is not used after
support multiple AUX events, remove it.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20240806204130.720977-3-leo.yan@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use evsel__is_aux_event() to decide if an event is a AUX event, this is
a refactoring to replace comparing the PMU type.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20240806204130.720977-2-leo.yan@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
'perf trace -p <PID>' work on a syscall that is unaugmented, but doesn't
work on a syscall that's augmented (when it calls perf_event_output() in
BPF).
Let's take open() as an example. open() is augmented in perf trace.
Before:
$ perf trace -e open -p 3792392
? ( ): ... [continued]: open()) = -1 ENOENT (No such file or directory)
? ( ): ... [continued]: open()) = -1 ENOENT (No such file or directory)
We can see there's no output.
After:
$ perf trace -e open -p 3792392
0.000 ( 0.123 ms): a.out/3792392 open(filename: "DINGZHEN", flags: WRONLY) = -1 ENOENT (No such file or directory)
1000.398 ( 0.116 ms): a.out/3792392 open(filename: "DINGZHEN", flags: WRONLY) = -1 ENOENT (No such file or directory)
Reason:
bpf_perf_event_output() will fail when you specify a pid in 'perf trace' (EOPNOTSUPP).
When using 'perf trace -p 114', before perf_event_open(), we'll have PID
= 114, and CPU = -1.
This is bad for bpf-output event, because the ring buffer won't accept
output from BPF's perf_event_output(), making it fail. I'm still trying
to find out why.
If we open bpf-output for every cpu, instead of setting it to -1, like
this:
PID = <PID>, CPU = 0
PID = <PID>, CPU = 1
PID = <PID>, CPU = 2
PID = <PID>, CPU = 3
Everything works.
You can test it with this script (open.c):
#include <unistd.h>
#include <sys/syscall.h>
int main()
{
int i1 = 1, i2 = 2, i3 = 3, i4 = 4;
char s1[] = "DINGZHEN", s2[] = "XUEBAO";
while (1) {
syscall(SYS_open, s1, i1, i2);
sleep(1);
}
return 0;
}
save, compile:
make open
perf trace:
perf trace -e open <path-to-the-executable>
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240815013626.935097-2-howardchu95@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We'll use it in the next patch, to deciding how to set up the ring
buffer.
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240815013626.935097-2-howardchu95@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Print the actual dropped sample count in the event stat.
$ sudo perf record -o- -e cycles --filter 'period < 10000' \
-e instructions --filter 'ip > 0x8000000000000000' perf test -w noploop | \
perf report --stat -i-
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.058 MB - ]
Aggregated stats:
TOTAL events: 469
MMAP events: 268 (57.1%)
COMM events: 2 ( 0.4%)
EXIT events: 1 ( 0.2%)
SAMPLE events: 16 ( 3.4%)
MMAP2 events: 22 ( 4.7%)
LOST_SAMPLES events: 2 ( 0.4%)
KSYMBOL events: 89 (19.0%)
BPF_EVENT events: 39 ( 8.3%)
ATTR events: 2 ( 0.4%)
FINISHED_ROUND events: 1 ( 0.2%)
ID_INDEX events: 1 ( 0.2%)
THREAD_MAP events: 1 ( 0.2%)
CPU_MAP events: 1 ( 0.2%)
EVENT_UPDATE events: 2 ( 0.4%)
TIME_CONV events: 1 ( 0.2%)
FEATURE events: 20 ( 4.3%)
FINISHED_INIT events: 1 ( 0.2%)
cycles stats:
SAMPLE events: 2
LOST_SAMPLES (BPF) events: 4010
instructions stats:
SAMPLE events: 14
LOST_SAMPLES (BPF) events: 3990
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240820154504.128923-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
So far it used tgid as a key to get the filter expressions in the
pinned filters map for regular users but it won't work well if the has
more than one filters at the same time. Let's add the event id to the
key of the filter hash map so that it can identify the right filter
expression in the BPF program.
As the event can be inherited to child tasks, it should use the primary
id which belongs to the parent (original) event. Since evsel opens the
event for multiple CPUs and tasks, it needs to maintain a separate hash
map for the event id.
In the user space, it keeps a list for the multiple evsel and release
the entries in the both hash map when it closes the event.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240820154504.128923-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The -Wcast-function-type-mismatch option was introduced in clang 19 and
its enabled by default, since we use -Werror, and python bindings do
casts that are valid but trips this warning, disable it if present.
Closes: https://lore.kernel.org/all/CA+icZUXoJ6BS3GMhJHV3aZWyb5Cz2haFneX0C5pUMUUhG-UVKQ@mail.gmail.com
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org # To allow building with the upcoming clang 19
Link: https://lore.kernel.org/lkml/CA+icZUVtHn8X1Tb_Y__c-WswsO0K8U9uy3r2MzKXwTA5THtL7w@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We'll need to check if an warning option introduced in clang 19 is
available on the clang version being used, so cover the error message
emitted when testing for a -W option.
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/CA+icZUVtHn8X1Tb_Y__c-WswsO0K8U9uy3r2MzKXwTA5THtL7w@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In some cases, compilers don't set the location expression in DWARF
precisely. For instance, it may assign a variable to a register after
copying it from a different register. Then it should use the register
for the new type but still uses the old register. This makes hard to
track the type information properly.
This is an example I found in __tcp_transmit_skb(). The first argument
(sk) of this function is a pointer to sock and there's a variable (tp)
for tcp_sock.
static int __tcp_transmit_skb(struct sock *sk, struct sk_buff *skb,
int clone_it, gfp_t gfp_mask, u32 rcv_nxt)
{
...
struct tcp_sock *tp;
BUG_ON(!skb || !tcp_skb_pcount(skb));
tp = tcp_sk(sk);
prior_wstamp = tp->tcp_wstamp_ns;
tp->tcp_wstamp_ns = max(tp->tcp_wstamp_ns, tp->tcp_clock_cache);
...
So it basically calls tcp_sk(sk) to get the tcp_sock pointer from sk.
But it turned out to be the same value because tcp_sock embeds sock as
the first member. The sk is located in reg5 (RDI) and tp is in reg3
(RBX). The offset of tcp_wstamp_ns is 0x748 and tcp_clock_cache is
0x750. So you need to use RBX (reg3) to access the fields in the
tcp_sock. But the code used RDI (reg5) as it has the same value.
$ pahole --hex -C tcp_sock vmlinux | grep -e 748 -e 750
u64 tcp_wstamp_ns; /* 0x748 0x8 */
u64 tcp_clock_cache; /* 0x750 0x8 */
And this is the disassembly of the part of the function.
<__tcp_transmit_skb>:
...
44: mov %rdi, %rbx
47: mov 0x748(%rdi), %rsi
4e: mov 0x750(%rdi), %rax
55: cmp %rax, %rsi
Because compiler put the debug info to RBX, it only knows RDI is a
pointer to sock and accessing those two fields resulted in error
due to offset being beyond the type size.
-----------------------------------------------------------
find data type for 0x748(reg5) at __tcp_transmit_skb+0x63
CU for net/ipv4/tcp_output.c (die:0x817f543)
frame base: cfa=0 fbreg=6
scope: [1/1] (die:81aac3e)
bb: [0 - 30]
var [0] -0x98(stack) type='struct tcp_out_options' size=0x28 (die:0x81af3df)
var [5] reg8 type='unsigned int' size=0x4 (die:0x8180ed6)
var [5] reg2 type='unsigned int' size=0x4 (die:0x8180ed6)
var [5] reg1 type='int' size=0x4 (die:0x818059e)
var [5] reg4 type='struct sk_buff*' size=0x8 (die:0x8181360)
var [5] reg5 type='struct sock*' size=0x8 (die:0x8181a0c) <<<--- the first argument ('sk' at %RDI)
mov [19] reg8 -> -0xa8(stack) type='unsigned int' size=0x4 (die:0x8180ed6)
mov [20] stack canary -> reg0
mov [29] reg0 -> -0x30(stack) stack canary
bb: [36 - 3e]
mov [36] reg4 -> reg15 type='struct sk_buff*' size=0x8 (die:0x8181360)
bb: [44 - 63]
mov [44] reg5 -> reg3 type='struct sock*' size=0x8 (die:0x8181a0c) <<<--- calling tcp_sk()
var [47] reg3 type='struct tcp_sock*' size=0x8 (die:0x819eead) <<<--- new variable ('tp' at %RBX)
var [4e] reg4 type='unsigned long long' size=0x8 (die:0x8180edd)
mov [58] reg4 -> -0xc0(stack) type='unsigned long long' size=0x8 (die:0x8180edd)
chk [63] reg5 offset=0x748 ok=1 kind=1 (struct sock*) : offset bigger than size <<<--- access with old variable
final result: offset bigger than size
While it's a fault in the compiler, we could work around this issue by
using the type of new variable when it's copied directly. So I've added
copied_from field in the register state to track those direct register
to register copies. After that new register gets a new type and the old
register still has the same type, it'll update (copy it back) the type
of the old register.
For example, if we can update type of reg5 at __tcp_transmit_skb+0x47,
we can find the target type of the instruction at 0x63 like below:
-----------------------------------------------------------
find data type for 0x748(reg5) at __tcp_transmit_skb+0x63
...
bb: [44 - 63]
mov [44] reg5 -> reg3 type='struct sock*' size=0x8 (die:0x8181a0c)
var [47] reg3 type='struct tcp_sock*' size=0x8 (die:0x819eead)
var [47] copyback reg5 type='struct tcp_sock*' size=0x8 (die:0x819eead) <<<--- here
mov [47] 0x748(reg5) -> reg4 type='unsigned long long' size=0x8 (die:0x8180edd)
mov [4e] 0x750(reg5) -> reg0 type='unsigned long long' size=0x8 (die:0x8180edd)
mov [58] reg4 -> -0xc0(stack) type='unsigned long long' size=0x8 (die:0x8180edd)
chk [63] reg5 offset=0x748 ok=1 kind=1 (struct tcp_sock*) : Good! <<<--- new type
found by insn track: 0x748(reg5) type-offset=0x748
final result: type='struct tcp_sock' size=0xa98 (die:0x819eeb2)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240821232628.353177-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When checking the match variable at the target instruction, it might not
have any information if it's a first write to a stack slot. In this
case it could spill a register value into the stack so the type info is
in the source operand.
But currently it's hard to get the operand from the checking function.
Let's process the instruction and retry to get the type info from the
stack if there's no information already.
This is an example of __tcp_transmit_skb(). The instructions are
<__tcp_transmit_skb>:
0: nopl 0x0(%rax, %rax, 1)
5: push %rbp
6: mov %rsp, %rbp
9: push %r15
b: push %r14
d: push %r13
f: push %r12
11: push %rbx
12: sub $0x98, %rsp
19: mov %r8d, -0xa8(%rbp)
...
It cannot find any variable at -0xa8(%rbp) at this point.
-----------------------------------------------------------
find data type for -0xa8(reg6) at __tcp_transmit_skb+0x19
CU for net/ipv4/tcp_output.c (die:0x817f543)
frame base: cfa=0 fbreg=6
scope: [1/1] (die:81aac3e)
bb: [0 - 19]
var [0] -0x98(stack) type='struct tcp_out_options' size=0x28 (die:0x81af3df)
var [5] reg8 type='unsigned int' size=0x4 (die:0x8180ed6)
var [5] reg2 type='unsigned int' size=0x4 (die:0x8180ed6)
var [5] reg1 type='int' size=0x4 (die:0x818059e)
var [5] reg4 type='struct sk_buff*' size=0x8 (die:0x8181360)
var [5] reg5 type='struct sock*' size=0x8 (die:0x8181a0c)
chk [19] reg6 offset=-0xa8 ok=0 kind=0 fbreg : no type information
no type information
And it was able to find the type after processing the 'mov' instruction.
-----------------------------------------------------------
find data type for -0xa8(reg6) at __tcp_transmit_skb+0x19
CU for net/ipv4/tcp_output.c (die:0x817f543)
frame base: cfa=0 fbreg=6
scope: [1/1] (die:81aac3e)
bb: [0 - 19]
var [0] -0x98(stack) type='struct tcp_out_options' size=0x28 (die:0x81af3df)
var [5] reg8 type='unsigned int' size=0x4 (die:0x8180ed6)
var [5] reg2 type='unsigned int' size=0x4 (die:0x8180ed6)
var [5] reg1 type='int' size=0x4 (die:0x818059e)
var [5] reg4 type='struct sk_buff*' size=0x8 (die:0x8181360)
var [5] reg5 type='struct sock*' size=0x8 (die:0x8181a0c)
chk [19] reg6 offset=-0xa8 ok=0 kind=0 fbreg : retry <<<--- here
mov [19] reg8 -> -0xa8(stack) type='unsigned int' size=0x4 (die:0x8180ed6)
chk [19] reg6 offset=-0xa8 ok=0 kind=0 fbreg : Good!
found by insn track: -0xa8(reg6) type-offset=0
final result: type='unsigned int' size=0x4 (die:0x8180ed6)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240821232628.353177-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In check_matching_type(), it'd be easier to display the typename in
question if it's available.
For example, check out the line starts with 'chk'.
-----------------------------------------------------------
find data type for 0x10(reg0) at cpuacct_charge+0x13
CU for kernel/sched/build_utility.c (die:0x137ee0b)
frame base: cfa=1 fbreg=7
scope: [3/3] (die:13d9632)
bb: [c - 13]
var [c] reg5 type='struct task_struct*' size=0x8 (die:0x1381230)
mov [c] 0xdf8(reg5) -> reg0 type='struct css_set*' size=0x8 (die:0x1385c56)
chk [13] reg0 offset=0x10 ok=1 kind=1 (struct css_set*) : Good! <<<--- here
found by insn track: 0x10(reg0) type-offset=0x10
final result: type='struct css_set' size=0x250 (die:0x1385b0e)
Another example:
-----------------------------------------------------------
find data type for 0x8(reg0) at menu_select+0x279
CU for drivers/cpuidle/governors/menu.c (die:0x7b0fe79)
frame base: cfa=1 fbreg=7
scope: [2/2] (die:7b11010)
bb: [273 - 277]
bb: [279 - 279]
chk [279] reg0 offset=0x8 ok=0 kind=0 cfa : no type information
scope: [1/2] (die:7b10cbc)
bb: [0 - 64]
...
mov [26a] imm=0xffffffff -> reg15
bb: [273 - 277]
bb: [279 - 279]
chk [279] reg0 offset=0x8 ok=1 kind=1 (long long unsigned int) : no/void pointer <<<--- here
final result: no/void pointer
Also change some places to print negative offsets properly.
Before:
-----------------------------------------------------------
find data type for 0xffffff40(reg6) at __tcp_transmit_skb+0x58
After:
-----------------------------------------------------------
find data type for -0xc0(reg6) at __tcp_transmit_skb+0x58
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240821232628.353177-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The __die_find_member_offset_cb() missed to handle bitfield members
which don't have DW_AT_data_member_location. Like in adding member
types in __add_member_cb() it should fallback to check the bit offset
when it resolves the member type for an offset.
Fixes: 437683a9941891c1 ("perf dwarf-aux: Handle type transfer for memory access")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240821232628.353177-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Sometimes it's useful to organize member fields in cache-line boundary.
The 'typecln' sort key is short for type-cacheline and to show samples
in each cacheline. The cacheline size is fixed to 64 for now, but it
can read the actual size once it saves the value from sysfs.
For example, you maybe want to which cacheline in a target is hot or
cold. The following shows members in the cfs_rq's first cache line.
$ perf report -s type,typecln,typeoff -H
...
- 2.67% struct cfs_rq
+ 1.23% struct cfs_rq: cache-line 2
+ 0.57% struct cfs_rq: cache-line 4
+ 0.46% struct cfs_rq: cache-line 6
- 0.41% struct cfs_rq: cache-line 0
0.39% struct cfs_rq +0x14 (h_nr_running)
0.02% struct cfs_rq +0x38 (tasks_timeline.rb_leftmost)
...
Committer testing:
# root@number:~# perf report -s type,typecln,typeoff -H --stdio
# Total Lost Samples: 0
#
# Samples: 5K of event 'cpu_atom/mem-loads,ldlat=5/P'
# Event count (approx.): 312251
#
# Overhead Data Type / Data Type Cacheline / Data Type Offset
# .............. ..................................................
#
<SNIP>
0.07% struct sigaction
0.05% struct sigaction: cache-line 1
0.02% struct sigaction +0x58 (sa_mask)
0.02% struct sigaction +0x78 (sa_mask)
0.03% struct sigaction: cache-line 0
0.02% struct sigaction +0x38 (sa_mask)
0.01% struct sigaction +0x8 (sa_mask)
<SNIP>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819233603.54941-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It'd be better to have them in hex to check cacheline alignment.
Percent offset size field
100.00 0 0x1c0 struct cfs_rq {
0.00 0 0x10 struct load_weight load {
0.00 0 0x8 long unsigned int weight;
0.00 0x8 0x4 u32 inv_weight;
};
0.00 0x10 0x4 unsigned int nr_running;
14.56 0x14 0x4 unsigned int h_nr_running;
0.00 0x18 0x4 unsigned int idle_nr_running;
0.00 0x1c 0x4 unsigned int idle_h_nr_running;
...
Committer notes:
Justification from Namhyung when asked about why it would be "better":
Cache line sizes are power of 2 so it'd be natural to use hex and
check whether an offset is in the same boundary. Also 'perf annotate'
shows instruction offsets in hex.
>
> Maybe this should be selectable?
I can add an option and/or a config if you want.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819233603.54941-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
