| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When resctrl is built on architectures without __cpuid_count()
support, build fails. resctrl uses __cpuid_count() defined in
kselftest.h.
Even though the problem is seen while building resctrl on aarch64,
this error can be seen on any platform that doesn't support CPUID.
CPUID is a x86/x86-64 feature and code paths with CPUID asm commands
will fail to build on all other architectures.
All others tests call __cpuid_count() do so from x86/x86_64 code paths
when _i386__ or __x86_64__ are defined. resctrl is an exception.
Fix the problem by defining __cpuid_count() only when __i386__ or
__x86_64__ are defined in kselftest.h and changing resctrl to call
__cpuid_count() only when __i386__ or __x86_64__ are defined.
In file included from resctrl.h:24,
from cat_test.c:11:
In function ‘arch_supports_noncont_cat’,
inlined from ‘noncont_cat_run_test’ at cat_test.c:326:6:
../kselftest.h:74:9: error: impossible constraint in ‘asm’
74 | __asm__ __volatile__ ("cpuid\n\t" \
| ^~~~~~~
cat_test.c:304:17: note: in expansion of macro ‘__cpuid_count’
304 | __cpuid_count(0x10, 1, eax, ebx, ecx, edx);
| ^~~~~~~~~~~~~
../kselftest.h:74:9: error: impossible constraint in ‘asm’
74 | __asm__ __volatile__ ("cpuid\n\t" \
| ^~~~~~~
cat_test.c:306:17: note: in expansion of macro ‘__cpuid_count’
306 | __cpuid_count(0x10, 2, eax, ebx, ecx, edx);
Fixes: ae638551ab64 ("selftests/resctrl: Add non-contiguous CBMs CAT test")
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Closes: https://lore.kernel.org/lkml/20240809071059.265914-1-usama.anjum@collabora.com/
Reported-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- In the series "mm: Avoid possible overflows in dirty throttling" Jan
Kara addresses a couple of issues in the writeback throttling code.
These fixes are also targetted at -stable kernels.
- Ryusuke Konishi's series "nilfs2: fix potential issues related to
reserved inodes" does that. This should actually be in the
mm-nonmm-stable tree, along with the many other nilfs2 patches. My
bad.
- More folio conversions from Kefeng Wang in the series "mm: convert to
folio_alloc_mpol()"
- Kemeng Shi has sent some cleanups to the writeback code in the series
"Add helper functions to remove repeated code and improve readability
of cgroup writeback"
- Kairui Song has made the swap code a little smaller and a little
faster in the series "mm/swap: clean up and optimize swap cache
index".
- In the series "mm/memory: cleanly support zeropage in
vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David
Hildenbrand has reworked the rather sketchy handling of the use of
the zeropage in MAP_SHARED mappings. I don't see any runtime effects
here - more a cleanup/understandability/maintainablity thing.
- Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling
of higher addresses, for aarch64. The (poorly named) series is
"Restructure va_high_addr_switch".
- The core TLB handling code gets some cleanups and possible slight
optimizations in Bang Li's series "Add update_mmu_tlb_range() to
simplify code".
- Jane Chu has improved the handling of our
fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in
the series "Enhance soft hwpoison handling and injection".
- Jeff Johnson has sent a billion patches everywhere to add
MODULE_DESCRIPTION() to everything. Some landed in this pull.
- In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang
has simplified migration's use of hardware-offload memory copying.
- Yosry Ahmed performs more folio API conversions in his series "mm:
zswap: trivial folio conversions".
- In the series "large folios swap-in: handle refault cases first",
Chuanhua Han inches us forward in the handling of large pages in the
swap code. This is a cleanup and optimization, working toward the end
objective of full support of large folio swapin/out.
- In the series "mm,swap: cleanup VMA based swap readahead window
calculation", Huang Ying has contributed some cleanups and a possible
fixlet to his VMA based swap readahead code.
- In the series "add mTHP support for anonymous shmem" Baolin Wang has
taught anonymous shmem mappings to use multisize THP. By default this
is a no-op - users must opt in vis sysfs controls. Dramatic
improvements in pagefault latency are realized.
- David Hildenbrand has some cleanups to our remaining use of
page_mapcount() in the series "fs/proc: move page_mapcount() to
fs/proc/internal.h".
- David also has some highmem accounting cleanups in the series
"mm/highmem: don't track highmem pages manually".
- Build-time fixes and cleanups from John Hubbard in the series
"cleanups, fixes, and progress towards avoiding "make headers"".
- Cleanups and consolidation of the core pagemap handling from Barry
Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers
and utilize them".
- Lance Yang's series "Reclaim lazyfree THP without splitting" has
reduced the latency of the reclaim of pmd-mapped THPs under fairly
common circumstances. A 10x speedup is seen in a microbenchmark.
It does this by punting to aother CPU but I guess that's a win unless
all CPUs are pegged.
- hugetlb_cgroup cleanups from Xiu Jianfeng in the series
"mm/hugetlb_cgroup: rework on cftypes".
- Miaohe Lin's series "Some cleanups for memory-failure" does just that
thing.
- Someone other than SeongJae has developed a DAMON feature in Honggyu
Kim's series "DAMON based tiered memory management for CXL memory".
This adds DAMON features which may be used to help determine the
efficiency of our placement of CXL/PCIe attached DRAM.
- DAMON user API centralization and simplificatio work in SeongJae
Park's series "mm/damon: introduce DAMON parameters online commit
function".
- In the series "mm: page_type, zsmalloc and page_mapcount_reset()"
David Hildenbrand does some maintenance work on zsmalloc - partially
modernizing its use of pageframe fields.
- Kefeng Wang provides more folio conversions in the series "mm: remove
page_maybe_dma_pinned() and page_mkclean()".
- More cleanup from David Hildenbrand, this time in the series
"mm/memory_hotplug: use PageOffline() instead of PageReserved() for
!ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline()
pages" and permits the removal of some virtio-mem hacks.
- Barry Song's series "mm: clarify folio_add_new_anon_rmap() and
__folio_add_anon_rmap()" is a cleanup to the anon folio handling in
preparation for mTHP (multisize THP) swapin.
- Kefeng Wang's series "mm: improve clear and copy user folio"
implements more folio conversions, this time in the area of large
folio userspace copying.
- The series "Docs/mm/damon/maintaier-profile: document a mailing tool
and community meetup series" tells people how to get better involved
with other DAMON developers. From SeongJae Park.
- A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does
that.
- David Hildenbrand sends along more cleanups, this time against the
migration code. The series is "mm/migrate: move NUMA hinting fault
folio isolation + checks under PTL".
- Jan Kara has found quite a lot of strangenesses and minor errors in
the readahead code. He addresses this in the series "mm: Fix various
readahead quirks".
- SeongJae Park's series "selftests/damon: test DAMOS tried regions and
{min,max}_nr_regions" adds features and addresses errors in DAMON's
self testing code.
- Gavin Shan has found a userspace-triggerable WARN in the pagecache
code. The series "mm/filemap: Limit page cache size to that supported
by xarray" addresses this. The series is marked cc:stable.
- Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations
and cleanup" cleans up and slightly optimizes KSM.
- Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of
code motion. The series (which also makes the memcg-v1 code
Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put
under config option" and "mm: memcg: put cgroup v1-specific memcg
data under CONFIG_MEMCG_V1"
- Dan Schatzberg's series "Add swappiness argument to memory.reclaim"
adds an additional feature to this cgroup-v2 control file.
- The series "Userspace controls soft-offline pages" from Jiaqi Yan
permits userspace to stop the kernel's automatic treatment of
excessive correctable memory errors. In order to permit userspace to
monitor and handle this situation.
- Kefeng Wang's series "mm: migrate: support poison recover from
migrate folio" teaches the kernel to appropriately handle migration
from poisoned source folios rather than simply panicing.
- SeongJae Park's series "Docs/damon: minor fixups and improvements"
does those things.
- In the series "mm/zsmalloc: change back to per-size_class lock"
Chengming Zhou improves zsmalloc's scalability and memory
utilization.
- Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for
pinning memfd folios" makes the GUP code use FOLL_PIN rather than
bare refcount increments. So these paes can first be moved aside if
they reside in the movable zone or a CMA block.
- Andrii Nakryiko has added a binary ioctl()-based API to
/proc/pid/maps for much faster reading of vma information. The series
is "query VMAs from /proc/<pid>/maps".
- In the series "mm: introduce per-order mTHP split counters" Lance
Yang improves the kernel's presentation of developer information
related to multisize THP splitting.
- Michael Ellerman has developed the series "Reimplement huge pages
without hugepd on powerpc (8xx, e500, book3s/64)". This permits
userspace to use all available huge page sizes.
- In the series "revert unconditional slab and page allocator fault
injection calls" Vlastimil Babka removes a performance-affecting and
not very useful feature from slab fault injection.
* tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits)
mm/mglru: fix ineffective protection calculation
mm/zswap: fix a white space issue
mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio
mm/hugetlb: fix possible recursive locking detected warning
mm/gup: clear the LRU flag of a page before adding to LRU batch
mm/numa_balancing: teach mpol_to_str about the balancing mode
mm: memcg1: convert charge move flags to unsigned long long
alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting
lib: reuse page_ext_data() to obtain codetag_ref
lib: add missing newline character in the warning message
mm/mglru: fix overshooting shrinker memory
mm/mglru: fix div-by-zero in vmpressure_calc_level()
mm/kmemleak: replace strncpy() with strscpy()
mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC
mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB
mm: ignore data-race in __swap_writepage
hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr
mm: shmem: rename mTHP shmem counters
mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async()
mm/migrate: putback split folios when numa hint migration fails
...
|
|
write_bm_pid_to_resctrl() uses resctrl_val to check test name which is
not a good interface generic resctrl FS functions should provide.
Tests define mongrp when needed. Remove the test name check in
write_bm_pid_to_resctrl() to only rely on the mongrp parameter being
non-NULL.
Remove write_bm_pid_to_resctrl() resctrl_val parameter and resctrl_val
member from the struct resctrl_val_param that are not used anymore.
Similarly, remove the test name constants that are no longer used.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The CMT selftest instantiates a monitor group to read LLC occupancy.
Since the test also creates a control group, it is unnecessary to
create another one for monitoring because control groups already
provide monitoring too.
Remove the unnecessary monitor group from the CMT selftest.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Nothing during MBA test uses mongrp even if it has been defined ever
since the introduction of the MBA test in the commit 01fee6b4d1f9
("selftests/resctrl: Add MBA test").
Remove the mongrp from MBA test.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The struct resctrl_val_param has control and monitor groups as char
arrays but they are not supposed to be mutated within resctrl_val().
Convert the ctrlgrp and mongrp char array within resctrl_val_param to
plain const char pointers and adjust the strlen() based checks to
check NULL instead.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Control group, monitor group and resctrl_val are not mutated and
should not be mutated within resctrlfs.c functions.
Mark this by using const char * for the arguments.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
bw_report is only needed for selecting the correct value from the
values IMC measured. It is a member in the resctrl_val_param struct and
is always set to "reads". The value is then checked in resctrl_val()
using validate_bw_report_request() that besides validating the input,
assumes it can mutate the string which is questionable programming
practice.
Simplify handling bw_report:
- Convert validate_bw_report_request() into get_bw_report_type() that
inputs and returns const char *. Use NULL to indicate error.
- Validate the report types inside measure_mem_bw(), not in
resctrl_val().
- Pass bw_report to measure_mem_bw() from ->measure() hook because
resctrl_val() no longer needs bw_report for anything.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The struct resctrl_val_param is there to customize behavior inside
resctrl_val() which is currently not used to full extent and there are
number of strcmp()s for test name in resctrl_val done by resctrl_val().
Create ->init() hook into the struct resctrl_val_param to cleanly
do per test initialization.
Remove also unused branches to setup paths and the related #defines
for CMT test.
While touching kerneldoc, make the adjacent line consistent with the
newly added form (callback vs call back).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The measurement done in resctrl_val() varies depending on test type.
The decision for how to measure is decided based on the string compare
to test name which is quite inflexible.
Add ->measure() callback into the struct resctrl_val_param to allow
each test to provide necessary code as a function which simplifies what
resctrl_val() has to do.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
initialize_mem_bw_resctrl() and set_mbm_path() contain complicated set
of conditions, each yielding different file to be opened to measure
memory bandwidth through resctrl FS. In practice, only two of them are
used. For MBA test, ctrlgrp is always provided, and for MBM test both
ctrlgrp and mongrp are set.
The file used differ between MBA/MBM test, however, MBM test
unnecessarily create monitor group because resctrl FS already provides
monitoring interface underneath any ctrlgrp too, which is what the MBA
selftest uses.
Consolidate memory bandwidth file used to the one used by the MBA
selftest. Remove all unused branches opening other files to simplify
the code.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
measure_vals() is awfully generic name so rename it to measure_mem_bw()
to describe better what it does and document the function parameters.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
'bm_pid' and 'ppid' are global variables. As they are used by different
processes and in signal handler, they cannot be entirely converted into
local variables.
The scope of those variables can still be reduced into resctrl_val.c
only. As PARENT_EXIT() macro is using 'ppid', make it a function in
resctrl_val.c and pass ppid to it as an argument because it is easier
to understand than using the global variable directly.
Pass 'bm_pid' into measure_vals() instead of relying on the global
variable which helps to make the call signatures of measure_vals() and
measure_llc_resctrl() more similar to each other.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
A few functions receive PIDs through int arguments. PIDs variables
should be of type pid_t, not int.
Convert pid arguments from int to pid_t.
Before printing PID, match the type to %d by casting to int which is
enough for Linux (standard would allow using a longer integer type but
generalizing for that would complicate the code unnecessarily, the
selftest code does not need to be portable).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Both initialize_mem_bw_resctrl() and initialize_llc_occu_resctrl() that
are called from resctrl_val() need to determine domain ID to construct
resctrl fs related paths. Both functions do it by taking CPU ID which
neither needs for any other purpose than determining the domain ID.
Consolidate determining the domain ID into resctrl_val() and pass the
domain ID instead of CPU ID to initialize_mem_bw_resctrl() and
initialize_llc_occu_resctrl().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Resctrl selftests refer to "bandwidth" currently in two other forms in
the code ("B/W" and "band width").
Use "bandwidth" consistently everywhere. While at it, fix also one
"over flow" -> "overflow" on a line that is touched by the change.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
For MBM/MBA tests, measure_vals() calls get_mem_bw_imc() that performs
the measurement over a duration of sleep(1) call. The memory bandwidth
numbers from IMC are derived over this duration. The resctrl FS derived
memory bandwidth, however, is calculated inside measure_vals() and only
takes delta between the previous value and the current one which
besides the actual test, also samples inter-test noise.
Rework the logic in measure_vals() and get_mem_bw_imc() such that the
resctrl FS memory bandwidth section covers much shorter duration
closely matching that of the IMC perf counters to improve measurement
accuracy.
For the second read after rewind() to return a fresh value, also
newline has to be consumed by the fscanf().
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
loops
The imc perf fd close() calls are missing from all error paths. In
addition, get_mem_bw_imc() handles fds in a for loop but close() is
based on two fixed indexes READ and WRITE.
Open code inner for loops to READ+WRITE entries for clarity and add a
function to close() IMC fds properly in all cases.
Fixes: 7f4d257e3a2a ("selftests/resctrl: Add callback to start a benchmark")
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Centralize the _GNU_SOURCE definition to CFLAGS in lib.mk. Remove
redundant defines from Makefiles that import lib.mk. Convert any usage of
"#define _GNU_SOURCE 1" to "#define _GNU_SOURCE".
This uses the form "-D_GNU_SOURCE=", which is equivalent to
"#define _GNU_SOURCE".
Otherwise using "-D_GNU_SOURCE" is equivalent to "-D_GNU_SOURCE=1" and
"#define _GNU_SOURCE 1", which is less commonly seen in source code and
would require many changes in selftests to avoid redefinition warnings.
Link: https://lkml.kernel.org/r/20240625223454.1586259-2-edliaw@google.com
Signed-off-by: Edward Liaw <edliaw@google.com>
Suggested-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kees Cook <kees@kernel.org>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The non-contiguous CBM test fails on AMD with:
Starting L3_NONCONT_CAT test ...
Mounting resctrl to "/sys/fs/resctrl"
CPUID output doesn't match 'sparse_masks' file content!
not ok 5 L3_NONCONT_CAT: test
AMD always supports non-contiguous CBM but does not report it via CPUID.
Fix the non-contiguous CBM test to use CPUID to discover non-contiguous
CBM support only on Intel.
Fixes: ae638551ab64 ("selftests/resctrl: Add non-contiguous CBMs CAT test")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
...two types of warnings occur:
warning: absolute value function 'abs' given an argument of type
'long' but has parameter of type 'int' which may cause truncation of
value
warning: taking the absolute value of unsigned type 'unsigned long'
has no effect
Fix these by:
a) using labs() in place of abs(), when long integers are involved, and
b) Change to use signed integer data types, in places where subtraction
is used (and could end up with negative values).
c) Remove a duplicate abs() call in cmt_test.c.
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
First of all, in order to build with clang at all, one must first apply
Valentin Obst's build fix for LLVM [1]. Once that is done, then when
building with clang, via:
make LLVM=1 -C tools/testing/selftests
...the following error occurs:
clang: error: cannot specify -o when generating multiple output files
This is because clang, unlike gcc, won't accept invocations of this
form:
clang file1.c header2.h
Fix this by using selftests/lib.mk facilities for tracking local header
file dependencies: add them to LOCAL_HDRS, leaving only the .c files to
be passed to the compiler.
[1] https://lore.kernel.org/all/20240329-selftests-libmk-llvm-rfc-v1-1-2f9ed7d1c49f@valentinobst.de/
Fixes: 8e289f454289 ("selftests/resctrl: Add resctrl.h into build deps")
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
After commit f7d5bcd35d42 ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_skip(), as __noreturn prevents
the compiler from warning that a caller of ksft_exit_skip() does not
return a value because the program will terminate upon calling these
functions.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Every test calls its cleanup function at the end of it's test function.
After the cleanup function pointer is added to the test framework this
can be simplified to executing the callback function at the end of the
generic test running function.
Make test cleanup functions static and call them from the end of
run_single_test() from the resctrl_test's cleanup function pointer.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Ctrl-c handler isn't aware of what test is currently running. Because of
that it executes all cleanups even if they aren't necessary. Since the
ctrl-c handler uses the sa_sigaction system no parameters can be passed
to it as function arguments.
Add a global variable to make ctrl-c handler aware of the currently run
test and only execute the correct cleanup callback.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Resctrl selftests use very similar functions to cleanup after
themselves. This creates a lot of code duplication. Also not being
hooked to the test framework means that ctrl-c handler isn't aware of
what test is currently running and executes all cleanups even though
only one is needed.
Add a function pointer to the resctrl_test struct and attach to it
cleanup functions from individual tests.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add tests for both L2 and L3 CAT to verify the return values
generated by writing non-contiguous CBMs don't contradict the
reported non-contiguous support information.
Use a logical XOR to confirm return value of write_schemata() and
non-contiguous CBMs support information match.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Feature checking done by resctrl_mon_feature_exists() covers features
represented by the feature name presence inside the 'mon_features' file
in /sys/fs/resctrl/info/L3_MON directory. There exists a different way
to represent feature support and that is by the presence of 0 or 1 in a
single file in the info/resource directory. In this case the filename
represents what feature support is being indicated.
Add a generic function to check file presence in the
/sys/fs/resctrl/info/<RESOURCE> directory.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
validate_resctrl_feature_request() is used to test both if a resource is
present in the info directory, and if a passed monitoring feature is
present in the mon_features file.
Refactor validate_resctrl_feature_request() into two smaller functions
that each accomplish one check to give feature checking more
granularity:
- Resource directory presence in the /sys/fs/resctrl/info directory.
- Feature name presence in the /sys/fs/resctrl/info/<RESOURCE>/mon_features
file.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The CAT non-contiguous selftests have to read the file responsible for
reporting support of non-contiguous CBMs in kernel (resctrl). Then the
test compares if that information matches what is reported by CPUID
output.
Add a generic helper function to read an unsigned number from
/sys/fs/resctrl/info/<RESOURCE>/<FILE>.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
To select test to run -t parameter can be used. However, -t cat
currently maps to L3 CAT test which will be confusing after more CAT
related tests will be added.
Allow selecting tests as groups and call L3 CAT test "L3_CAT", "CAT"
group will enable all CAT related tests.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Domain id is acquired differently depending on CPU. AMD tests use id
from L3 cache, whereas CPUs from other vendors base the id on topology
package id. In order to support L2 CAT test, this has to be
generalized.
The driver side code seems to get the domain ids from cache ids so the
approach used by the AMD branch seems to match the kernel-side code. It
will also work with L2 domain IDs as long as the cache level is
generalized.
Using the topology id was always fragile due to mismatch with the
kernel-side way to acquire the domain id. It got incorrect domain id,
e.g., when Cluster-on-Die (CoD) is enabled for CPU (but CoD is not well
suited for resctrl in the first place so it has not been a big issue if
tests don't work correctly with it).
Taking all the above into account, generalize acquiring the domain id
by taking it from the cache id and do not hard-code the cache level.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Kernel-side calls the instances of a resource domains.
Change the resource_id naming in the selftest code to domain_id to
match the kernel side better.
Suggested-by: Maciej Wieczór-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
"L2"/"L3" conversion to integer is embedded into get_cache_size()
which prevents reuse.
Create a helper for the cache string to integer conversion to make
it reusable.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
write_schemata() takes the test name as an argument and determines the
relevant resource based on the test name. Such mapping from name to
resource does not really belong to resctrlfs.c that should provide
only generic, test-independent functions.
Pass the resource stored in the test information structure to
write_schemata() instead of the test name. The new API is also more
flexible as it enables to use write_schemata() for more than one
resource within a test.
While touching the sprintf(), move the unnecessary %c that is always
'=' directly into the format string.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Each test currently has a "run test" function in per test file and
another resctrl_tests.c. The functions in resctrl_tests.c are almost
identical.
Generalize the one in resctrl_tests.c such that it can be shared
between all of the tests. It makes adding new tests easier and removes
the per test if () forests.
Also add comment to CPU vendor IDs that they must be defined as bits
for a bitmask.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
resctrl_tests reads a set of parameters and passes them individually
for each tests which causes variations in the call signature between
the tests.
Add struct input_params to hold all input parameters. It can be easily
passed to every test without varying the call signature.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
CAT test does not reset the CPU affinity after the benchmark.
This is relatively harmless as is because CAT test is the last
benchmark to run, however, more tests may be added later.
Store the CPU affinity the first time taskset_benchmark() is run and
add taskset_restore() which the test can call to reset the CPU mask to
its original value.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
CAT test spawns two processes into two different control groups with
exclusive schemata. Both the processes alloc a buffer from memory
matching their allocated LLC block size and flush the entire buffer out
of caches. Since the processes are reading through the buffer only once
during the measurement and initially all the buffer was flushed, the
test isn't testing CAT.
Rewrite the CAT test to allocate a buffer sized to half of LLC. Then
perform a sequence of tests with different LLC alloc sizes starting
from half of the CBM bits down to 1-bit CBM. Flush the buffer before
each test and read the buffer twice. Observe the LLC misses on the
second read through the buffer. As the allocated LLC block gets smaller
and smaller, the LLC misses will become larger and larger giving a
strong signal on CAT working properly.
The new CAT test is using only a single process because it relies on
measured effect against another run of itself rather than another
process adding noise. The rest of the system is set to use the CBM bits
not used by the CAT test to keep the test isolated.
Replace count_bits() with count_contiguous_bits() to get the first bit
position in order to be able to calculate masks based on it.
This change has been tested with a number of systems from different
generations.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When reading memory in order, HW prefetching optimizations will
interfere with measuring how caches and memory are being accessed. This
adds noise into the results.
Change the fill_buf reading loop to not use an obvious in-order access
using multiply by a prime and modulo.
Using a prime multiplier with modulo ensures the entire buffer is
eventually read. 23 is small enough that the reads are spread out but
wrapping does not occur very frequently (wrapping too often can trigger
L2 hits more frequently which causes noise to the test because getting
the data from LLC is not required).
It was discovered that not all primes work equally well and some can
cause wildly unstable results (e.g., in an earlier version of this
patch, the reads were done in reversed order and 59 was used as the
prime resulting in unacceptably high and unstable results in MBA and
MBM test on some architectures).
Link: https://lore.kernel.org/linux-kselftest/TYAPR01MB6330025B5E6537F94DA49ACB8B499@TYAPR01MB6330.jpnprd01.prod.outlook.com/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The fill_buf code prevents compiler optimizating the entire read loop
away by writing the final value of the variable into a file. While it
achieves the goal, writing into a file requires significant amount of
work within the innermost test loop and also error handling.
A simpler approach is to take advantage of volatile. Writing through
a pointer to a volatile variable is enough to prevent compiler from
optimizing the write away, and therefore compiler cannot remove the
read loop either.
Add a volatile 'value_sink' into resctrl_tests.c and make fill_buf to
write into it. As a result, the error handling in fill_buf.c can be
simplified.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Perf fd (pe_fd) is opened, reset, and enabled during every test the CAT
selftest runs. Also, ioctl(pe_fd, ...) calls are not error checked even
if ioctl() could return an err |
