| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Explicitly verify that MPC connection attempts towards a port-based
signal endpoint fail with a reset.
Note that this new test is a bit different from the other ones, not
using 'run_tests'. It is then needed to add the capture capability, and
the picking the right port which have been extracted into three new
helpers. The info about the capture can also be printed from a single
point, which simplifies the exit paths in do_transfer().
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 1729cf186d8a ("mptcp: create the listening socket for new port")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241014-net-mptcp-mpc-port-endp-v2-2-7faea8e6b6ae@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fixes for build, run-time errors, and reporting errors:
- ftrace: regression test for a kernel crash when running function
graph tracing and then enabling function profiler.
- rseq: fix for mm_cid test failure.
- vDSO:
- fixes to reporting skip and other error conditions
- changes unconditionally build chacha and getrandom tests on all
architectures to make it easier for them to run in CIs
- build error when sched.h to bring in CLONE_NEWTIME define"
* tag 'linux_kselftest-fixes-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
ftrace/selftest: Test combination of function_graph tracer and function profiler
selftests/rseq: Fix mm_cid test failure
selftests: vDSO: Explicitly include sched.h
selftests: vDSO: improve getrandom and chacha error messages
selftests: vDSO: unconditionally build getrandom test
selftests: vDSO: unconditionally build chacha test
|
|
This fix solves this error, when calling kselftest with targets
"drivers/net":
File "tools/testing/selftests/net/lib/py/nsim.py", line 64, in __init__
if e.errno == errno.ENOSPC:
NameError: name 'errno' is not defined
The error was found by running tests manually with the command:
make kselftest TARGETS="drivers/net"
The module errno makes available standard error system symbols.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Link: https://patch.msgid.link/20241010183034.24739-1-alessandro.zanni87@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This fix solves this error, when calling kselftest with targets "net/rds":
The error was found by running tests manually with the command:
make kselftest TARGETS="net/rds"
The patch also specifies to import ip() function from the utils module.
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20241010194421.48198-1-alessandro.zanni87@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Masami reported a bug when running function graph tracing then the
function profiler. The following commands would cause a kernel crash:
# cd /sys/kernel/tracing/
# echo function_graph > current_tracer
# echo 1 > function_profile_enabled
In that order. Create a test to test this two to make sure this does not
come back as a regression.
Link: https://lore.kernel.org/172398528350.293426.8347220120333730248.stgit@devnote2
Link: https://lore.kernel.org/all/20241010165235.35122877@gandalf.local.home/
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Adapt the rseq.c/rseq.h code to follow GNU C library changes introduced by:
glibc commit 2e456ccf0c34 ("Linux: Make __rseq_size useful for feature detection (bug 31965)")
Without this fix, rseq selftests for mm_cid fail:
./run_param_test.sh
Default parameters
Running test spinlock
Running compare-twice test spinlock
Running mm_cid test spinlock
Error: cpu id getter unavailable
Fixes: 18c2355838e7 ("selftests/rseq: Implement rseq mm_cid field support")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
CC: Boqun Feng <boqun.feng@gmail.com>
CC: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
CC: Carlos O'Donell <carlos@redhat.com>
CC: Florian Weimer <fweimer@redhat.com>
CC: linux-kselftest@vger.kernel.org
CC: stable@vger.kernel.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add assertions in `bpf_link_info.uprobe_multi` test to verify that
`count` and `path_size` fields are correctly populated when the fields
are unset.
This tests a previous bug where the `path_size` field was not populated
when `path` and `path_size` were unset.
Signed-off-by: Tyrone Wu <wudevelops@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241011000803.681190-2-wudevelops@gmail.com
|
|
Linking of urandom_read and liburandom_read.so prefers LLVM's 'ld.lld' but
falls back to using 'ld' if unsupported. However, this fallback discards
any existing makefile macro for LD and can break cross-compilation.
Fix by changing the fallback to use the target linker $(LD), passed via
'-fuse-ld=' using an absolute path rather than a linker "flavour".
Fixes: 08c79c9cd67f ("selftests/bpf: Don't force lld on non-x86 architectures")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241009040720.635260-1-tony.ambardar@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and netfilter.
Current release - regressions:
- dsa: sja1105: fix reception from VLAN-unaware bridges
- Revert "net: stmmac: set PP_FLAG_DMA_SYNC_DEV only if XDP is
enabled"
- eth: fec: don't save PTP state if PTP is unsupported
Current release - new code bugs:
- smc: fix lack of icsk_syn_mss with IPPROTO_SMC, prevent null-deref
- eth: airoha: update Tx CPU DMA ring idx at the end of xmit loop
- phy: aquantia: AQR115c fix up PMA capabilities
Previous releases - regressions:
- tcp: 3 fixes for retrans_stamp and undo logic
Previous releases - always broken:
- net: do not delay dst_entries_add() in dst_release()
- netfilter: restrict xtables extensions to families that are safe,
syzbot found a way to combine ebtables with extensions that are
never used by userspace tools
- sctp: ensure sk_state is set to CLOSED if hashing fails in
sctp_listen_start
- mptcp: handle consistently DSS corruption, and prevent corruption
due to large pmtu xmit"
* tag 'net-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
MAINTAINERS: Add headers and mailing list to UDP section
MAINTAINERS: consistently exclude wireless files from NETWORKING [GENERAL]
slip: make slhc_remember() more robust against malicious packets
net/smc: fix lacks of icsk_syn_mss with IPPROTO_SMC
ppp: fix ppp_async_encode() illegal access
docs: netdev: document guidance on cleanup patches
phonet: Handle error of rtnl_register_module().
mpls: Handle error of rtnl_register_module().
mctp: Handle error of rtnl_register_module().
bridge: Handle error of rtnl_register_module().
vxlan: Handle error of rtnl_register_module().
rtnetlink: Add bulk registration helpers for rtnetlink message handlers.
net: do not delay dst_entries_add() in dst_release()
mptcp: pm: do not remove closing subflows
mptcp: fallback when MPTCP opts are dropped after 1st data
tcp: fix mptcp DSS corruption due to large pmtu xmit
mptcp: handle consistently DSS corruption
net: netconsole: fix wrong warning
net: dsa: refuse cross-chip mirroring operations
net: fec: don't save PTP state if PTP is unsupported
...
|
|
Add a test case for kfuncs from multiple external modules, checking
that the correct kfuncs are called regardless of which order they're
called in. Specifically, check that calling the kfuncs in an order
different from the one the modules' BTF are loaded in works.
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20241010-fix-kfunc-btf-caching-for-modules-v2-3-745af6c1af98@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Generalize the previous [un]load_bpf_testmod() helpers (in
testing_helpers.c) to the more generic [un]load_module(), which can
load an arbitrary kernel module by name. This allows future selftests
to more easily load custom kernel modules other than bpf_testmod.ko.
Refactor [un]load_bpf_testmod() to wrap this new helper.
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20241010-fix-kfunc-btf-caching-for-modules-v2-2-745af6c1af98@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Existing code calls connect() with a 'struct sockaddr_in6 *' argument
where a 'struct sockaddr *' argument is declared, yielding compile errors
when building for mips64el/musl-libc:
In file included from cgroup_ancestor.c:3:
cgroup_ancestor.c: In function 'send_datagram':
cgroup_ancestor.c:38:38: error: passing argument 2 of 'connect' from incompatible pointer type [-Werror=incompatible-pointer-types]
38 | if (!ASSERT_OK(connect(sock, &addr, sizeof(addr)), "connect")) {
| ^~~~~
| |
| struct sockaddr_in6 *
./test_progs.h:343:29: note: in definition of macro 'ASSERT_OK'
343 | long long ___res = (res); \
| ^~~
In file included from .../netinet/in.h:10,
from .../arpa/inet.h:9,
from ./test_progs.h:17:
.../sys/socket.h:386:19: note: expected 'const struct sockaddr *' but argument is of type 'struct sockaddr_in6 *'
386 | int connect (int, const struct sockaddr *, socklen_t);
| ^~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
This only compiles because of a glibc extension allowing declaration of the
argument as a "transparent union" which includes both types above.
Explicitly cast the argument to allow compiling for both musl and glibc.
Cc: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Fixes: f957c230e173 ("selftests/bpf: convert test_skb_cgroup_id_user to test_progs")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241008231232.634047-1-tony.ambardar@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Fix `name_len` field assertions in `bpf_link_info.perf_event` for
kprobe/uprobe/tracepoint to validate correct name size instead of 0.
Fixes: 23cf7aa539dc ("selftests/bpf: Add selftest for fill_link_info")
Signed-off-by: Tyrone Wu <wudevelops@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20241008164312.46269-2-wudevelops@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add three success test cases to test the flattening of array of nested
struct. For these three tests, the number of special fields in map is
BTF_FIELDS_MAX, but the array is defined in structs with different
nested level.
Add one failure test case for the flattening as well. In the test case,
the number of special fields in map is BTF_FIELDS_MAX + 1. It will make
btf_parse_fields() in map_create() return -E2BIG, the creation of map
will succeed, but the load of program will fail because the btf_record
is invalid for the map.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241008071114.3718177-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
meta iifname veth0 ip daddr ... fib daddr oif
... is expected to return "dummy0" interface which is part of same vrf
as veth0.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The hmm2 double_map test was failing due to an incorrect buffer->mirror
size. The buffer->mirror size was 6, while buffer->ptr size was 6 *
PAGE_SIZE. The test failed because the kernel's copy_to_user function was
attempting to copy a 6 * PAGE_SIZE buffer to buffer->mirror. Since the
size of buffer->mirror was incorrect, copy_to_user failed.
This patch corrects the buffer->mirror size to 6 * PAGE_SIZE.
Test Result without this patch
==============================
# RUN hmm2.hmm2_device_private.double_map ...
# hmm-tests.c:1680:double_map:Expected ret (-14) == 0 (0)
# double_map: Test terminated by assertion
# FAIL hmm2.hmm2_device_private.double_map
not ok 53 hmm2.hmm2_device_private.double_map
Test Result with this patch
===========================
# RUN hmm2.hmm2_device_private.double_map ...
# OK hmm2.hmm2_device_private.double_map
ok 53 hmm2.hmm2_device_private.double_map
Link: https://lkml.kernel.org/r/20240927050752.51066-1-donettom@linux.ibm.com
Fixes: fee9f6d1b8df ("mm/hmm/test: add selftests for HMM")
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The sched_ext selftests is missing proper cross-compilation support, a
proper target entry, and out-of-tree build support.
When building the kselftest suite, e.g.:
make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- \
TARGETS=sched_ext SKIP_TARGETS="" O=/output/foo \
-C tools/testing/selftests install
or:
make ARCH=arm64 LLVM=1 TARGETS=sched_ext SKIP_TARGETS="" \
O=/output/foo -C tools/testing/selftests install
The expectation is that the sched_ext is included, cross-built, the
correct toolchain is picked up, and placed into /output/foo.
In contrast to the BPF selftests, the sched_ext suite does not use
bpftool at test run-time, so it is sufficient to build bpftool for the
build host only.
Add ARCH, CROSS_COMPILE, OUTPUT, and TARGETS support to the sched_ext
selftest. Also, remove some variables that were unused by the
Makefile.
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: David Vernet <void@manifault.com>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The previous commit introduced the use of CLONE_NEWTIME without including
<sched.h> which contains its definition.
Add an explicit include of <sched.h> to ensure that CLONE_NEWTIME
is correctly defined before it is used.
Fixes: 2aec90036dcd ("selftests: vDSO: ensure vgetrandom works in a time namespace")
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Improve the error and skip condition messages to let the developer know
precisely where a test has failed. Also make better use of the ksft api
for this.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Rather than building on supported archs, build on all archs, and then
use the presence of the symbol in the vDSO to either skip the test or
move forward with it.
Note that this means that this test no longer checks whether the symbol
was correctly added to the kernel. But hopefully this will be clear
enough to developers and we'll cross our fingers that symbols aren't
removed by accident and not caught after this change.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Rather than using symlinks to find the vgetrandom-chacha.S file for each
arch, store this in a file that uses the compiler to determine
architecture, and then make use of weak symbols to skip the test on
architectures that don't provide the code.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Starting with 6.12 commit 85585b4bc8d8 ("selftests: add ncdevmem, netcat
for devmem TCP") kselftest-all creates additional outputs that
kselftest-clean does not cleanup:
$ make defconfig
$ make kselftest-all
$ make kselftest-clean
$ git clean -ndxf | grep tools/net
Would remove tools/net/ynl/lib/__pycache__/
Would remove tools/net/ynl/lib/ynl.a
Would remove tools/net/ynl/lib/ynl.d
Would remove tools/net/ynl/lib/ynl.o
Make kselftest-clean remove the newly added net/ynl outputs.
Fixes: 85585b4bc8d8 ("selftests: add ncdevmem, netcat for devmem TCP")
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20241005215600.852260-1-gthelen@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The generated include.sh should be ignored by git. Create a new
gitignore and add the file to the list.
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241005-net-selftests-gitignore-v2-3-3a0b2876394a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The include.sh file is generated when building the net/rds selftests,
but there is no rule to delete it with the clean target. Add the file to
EXTRA_CLEAN in order to remove it when required.
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241005-net-selftests-gitignore-v2-2-3a0b2876394a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This executable is missing from the corresponding gitignore file.
Add msg_oob to the net gitignore list.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241005-net-selftests-gitignore-v2-1-3a0b2876394a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
* kvm-arm64/idregs-6.12:
: .
: Make some fields of ID_AA64DFR0_EL1 and ID_AA64PFR1_EL1
: writable from userspace, so that a VMM can influence the
: set of guest-visible features.
:
: - for ID_AA64DFR0_EL1: DoubleLock, WRPs, PMUVer and DebugVer
: are writable (courtesy of Shameer Kolothum)
:
: - for ID_AA64PFR1_EL1: BT, SSBS, CVS2_frac are writable
: (courtesy of Shaoqin Huang)
: .
KVM: selftests: aarch64: Add writable test for ID_AA64PFR1_EL1
KVM: arm64: Allow userspace to change ID_AA64PFR1_EL1
KVM: arm64: Use kvm_has_feat() to check if FEAT_SSBS is advertised to the guest
KVM: arm64: Disable fields that KVM doesn't know how to handle in ID_AA64PFR1_EL1
KVM: arm64: Make the exposed feature bits in AA64DFR0_EL1 writable from userspace
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
x86:
- Fix compilation with KVM_INTEL=KVM_AMD=n
- Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use
Selftests:
- Fix compilation on non-x86 architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/reboot: emergency callbacks are now registered by common KVM code
KVM: x86: leave kvm.ko out of the build if no vendor module is requested
KVM: x86/mmu: fix KVM_X86_QUIRK_SLOT_ZAP_ALL for shadow MMU
KVM: arm64: Fix kvm_has_feat*() handling of negative features
KVM: selftests: Fix build on architectures other than x86_64
KVM: arm64: Another reviewer reshuffle
KVM: arm64: Constrain the host to the maximum shared SVE VL with pKVM
KVM: arm64: Fix __pkvm_init_vcpu cptr_el2 error path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.12, take #1
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fixes to build warnings, install scripts, run-time error path, and git
status cleanups to tests:
- devices/probe: fix for Python3 regex string syntax warnings
- clone3: removing unused macro from clone3_cap_checkpoint_restore()
- vDSO: fix to align getrandom states to cache line
- core and exec: add missing executables to .gitignore files
- rtc: change to skip test if /dev/rtc0 can't be accessed
- timers/posix: fix warn_unused_result result in __fatal_error()
- breakpoints: fix to detect suspend successful condition correctly
- hid: fix to install required dependencies to run the test"
* tag 'linux_kselftest-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: breakpoints: use remaining time to check if suspend succeed
kselftest/devices/probe: Fix SyntaxWarning in regex strings for Python3
selftest: hid: add missing run-hid-tools-tests.sh
selftests: vDSO: align getrandom states to cache line
selftests: exec: update gitignore for load_address
selftests: core: add unshare_test to gitignore
clone3: clone3_cap_checkpoint_restore: remove unused MAX_PID_NS_LEVEL macro
selftests:timers: posix_timers: Fix warn_unused_result in __fatal_error()
selftest: rtc: Check if could access /dev/rtc0 before testing
|
|
Currently, the second bridge command overwrites the first one.
Fix this by adding this VID to the interface behind $swp2.
The one_bridge_two_pvids() test intends to check that there is no
leakage of traffic between bridge ports which have a single VLAN - the
PVID VLAN.
Because of a typo, port $swp1 is configured with a PVID twice (second
command overwrites first), and $swp2 isn't configured at all (and since
the bridge vlan_default_pvid property is set to 0, this port will not
have a PVID at all, so it will drop all untagged and priority-tagged
traffic).
So, instead of testing the configuration that was intended, we are
testing a different one, where one port has PVID 2 and the other has
no PVID. This incorrect version of the test should also pass, but is
ineffective for its purpose, so fix the typo.
This typo has an impact on results of the test,
potentially leading to wrong conclusions regarding
the functionality of a network device.
The tests results:
TEST: Switch ports in VLAN-aware bridge with different PVIDs:
Unicast non-IP untagged [ OK ]
Multicast non-IP untagged [ OK ]
Broadcast non-IP untagged [ OK ]
Unicast IPv4 untagged [ OK ]
Multicast IPv4 untagged [ OK ]
Unicast IPv6 untagged [ OK ]
Multicast IPv6 untagged [ OK ]
Unicast non-IP VID 1 [ OK ]
Multicast non-IP VID 1 [ OK ]
Broadcast non-IP VID 1 [ OK ]
Unicast IPv4 VID 1 [ OK ]
Multicast IPv4 VID 1 [ OK ]
Unicast IPv6 VID 1 [ OK ]
Multicast IPv6 VID 1 [ OK ]
Unicast non-IP VID 4094 [ OK ]
Multicast non-IP VID 4094 [ OK ]
Broadcast non-IP VID 4094 [ OK ]
Unicast IPv4 VID 4094 [ OK ]
Multicast IPv4 VID 4094 [ OK ]
Unicast IPv6 VID 4094 [ OK ]
Multicast IPv6 VID 4094 [ OK ]
Fixes: 476a4f05d9b8 ("selftests: forwarding: add a no_forwarding.sh test")
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Kacper Ludwinski <kac.ludwinski@icloud.com>
Link: https://patch.msgid.link/20241002051016.849-1-kac.ludwinski@icloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new netfilter selftests to test against br_netfilter panics when
VxLAN single-device is used together with untagged traffic and high MTU.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Andy Roulin <aroulin@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241001154400.22787-3-aroulin@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Slightly high amount of changes in this round, partly because of my
vacation in the last weeks. But all changes are small and nothing
looks worrisome.
The biggest LOCs is MAINTAINERS updates, and there is a core change
for card-ID string creation for non-ASCII inputs. Others are rather
device-specific, such as new quirks and device IDs for ASoC, usual
HD-audio and USB-audio quirks and fixes, as well as regression fixes
in HD-audio HDMI audio and Conexant codec"
* tag 'sound-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (39 commits)
ALSA: hda/conexant: Fix conflicting quirk for System76 Pangolin
ALSA: line6: add hw monitor volume control to POD HD500X
ALSA: gus: Fix some error handling paths related to get_bpos() usage
ALSA: hda: Add missing parameter description for snd_hdac_stream_timecounter_init()
ALSA: usb-audio: Add native DSD support for Luxman D-08u
ALSA: core: add isascii() check to card ID generator
MAINTAINERS: ALSA: use linux-sound@vger.kernel.org list
Revert "ALSA: hda: Conditionally use snooping for AMD HDMI"
ASoC: intel: sof_sdw: Add check devm_kasprintf() returned value
ASoC: imx-card: Set card.owner to avoid a warning calltrace if SND=m
ASoC: dt-bindings: davinci-mcasp: Fix interrupts property
ASoC: qcom: sm8250: add qrb4210-rb2-sndcard compatible string
ASoC: dt-bindings: qcom,sm8250: add qrb4210-rb2-sndcard
ALSA: hda: fix trigger_tstamp_latched
ALSA: hda/realtek: Add a quirk for HP Pavilion 15z-ec200
ALSA: hda/generic: Drop obsoleted obey_preferred_dacs flag
ALSA: hda/generic: Unconditionally prefer preferred_dacs pairs
ALSA: silence integer wrapping warning
ASoC: Intel: soc-acpi: arl: Fix some missing empty terminators
ASoC: Intel: soc-acpi-intel-rpl-match: add missing empty item
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from ieee802154, bluetooth and netfilter.
Current release - regressions:
- eth: mlx5: fix wrong reserved field in hca_cap_2 in mlx5_ifc
- eth: am65-cpsw: fix forever loop in cleanup code
Current release - new code bugs:
- eth: mlx5: HWS, fixed double-free in error flow of creating SQ
Previous releases - regressions:
- core: avoid potential underflow in qdisc_pkt_len_init() with UFO
- core: test for not too small csum_start in virtio_net_hdr_to_skb()
- vrf: revert "vrf: remove unnecessary RCU-bh critical section"
- bluetooth:
- fix uaf in l2cap_connect
- fix possible crash on mgmt_index_removed
- dsa: improve shutdown sequence
- eth: mlx5e: SHAMPO, fix overflow of hd_per_wq
- eth: ip_gre: fix drops of small packets in ipgre_xmit
Previous releases - always broken:
- core: fix gso_features_check to check for both
dev->gso_{ipv4_,}max_size
- core: fix tcp fraglist segmentation after pull from frag_list
- netfilter: nf_tables: prevent nf_skb_duplicated corruption
- sctp: set sk_state back to CLOSED if autobind fails in
sctp_listen_start
- mac802154: fix potential RCU dereference issue in
mac802154_scan_worker
- eth: fec: restart PPS after link state change"
* tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (48 commits)
sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start
dt-bindings: net: xlnx,axi-ethernet: Add missing reg minItems
doc: net: napi: Update documentation for napi_schedule_irqoff
net/ncsi: Disable the ncsi work before freeing the associated structure
net: phy: qt2025: Fix warning: unused import DeviceId
gso: fix udp gso fraglist segmentation after pull from frag_list
bridge: mcast: Fail MDB get request on empty entry
vrf: revert "vrf: Remove unnecessary RCU-bh critical section"
net: ethernet: ti: am65-cpsw: Fix forever loop in cleanup code
net: phy: realtek: Check the index value in led_hw_control_get
ppp: do not assume bh is held in ppp_channel_bridge_input()
selftests: rds: move include.sh to TEST_FILES
net: test for not too small csum_start in virtio_net_hdr_to_skb()
net: gso: fix tcp fraglist segmentation after pull from frag_list
ipv4: ip_gre: Fix drops of small packets in ipgre_xmit
net: stmmac: dwmac4: extend timeout for VLAN Tag register busy bit check
net: add more sanity checks to qdisc_pkt_len_init()
net: avoid potential underflow in qdisc_pkt_len_init() with UFO
net: ethernet: ti: cpsw_ale: Fix warning on some platforms
net: microchip: Make FDMA config symbol invisible
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix incorrect documentation in uapi/linux/netfilter/nf_tables.h
regarding flowtable hooks, from Phil Sutter.
2) Fix nft_audit.sh selftests with newer nft binaries, due to different
(valid) audit output, also from Phil.
3) Disable BH when duplicating packets via nf_dup infrastructure,
otherwise race on nf_skb_duplicated for locally generated traffic.
From Eric.
4) Missing return in callback of selftest C program, from zhang jiao.
netfilter pull request 24-10-02
* tag 'nf-24-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: Add missing return value
netfilter: nf_tables: prevent nf_skb_duplicated corruption
selftests: netfilter: Fix nft_audit.sh for newer nft binaries
netfilter: uapi: NFTA_FLOWTABLE_HOOK is NLA_NESTED
====================
Link: https://patch.msgid.link/20241002202421.1281311-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The include.sh file is generated for inclusion and should not be executable.
Otherwise, it will be added to kselftest-list.txt. Additionally, add the
executable bit for test.py at the same time to ensure proper functionality.
Fixes: 3ade6ce1255e ("selftests: rds: add testing infrastructure")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20240927041349.81216-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
The current xdp_devmap_attach test attaches a program
that redirects to another program via devmap.
It is, however, never executed, so do that to catch
any bugs that might occur during execution.
Also, execute the same for a veth pair so that we
also cover the non-generic path.
Warning: Running this without the bugfix in this series
will likely crash your system.
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20240911-devel-koalo-fix-ingress-ifindex-v4-2-5c643ae10258@linutronix.de
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
step_after_suspend_test fails with device busy error while
writing to /sys/power/state to start suspend. The test believes
it failed to enter suspend state with
$ sudo ./step_after_suspend_test
TAP version 13
Bail out! Failed to enter Suspend state
However, in the kernel message, I indeed see the system get
suspended and then wake up later.
[611172.033108] PM: suspend entry (s2idle)
[611172.044940] Filesystems sync: 0.006 seconds
[611172.052254] Freezing user space processes
[611172.059319] Freezing user space processes completed (elapsed 0.001 seconds)
[611172.067920] OOM killer disabled.
[611172.072465] Freezing remaining freezable tasks
[611172.080332] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[611172.089724] printk: Suspending console(s) (use no_console_suspend to debug)
[611172.117126] serial 00:03: disabled
some other hardware get reconnected
[611203.136277] OOM killer enabled.
[611203.140637] Restarting tasks ...
[611203.141135] usb 1-8.1: USB disconnect, device number 7
[611203.141755] done.
[611203.155268] random: crng reseeded on system resumption
[611203.162059] PM: suspend exit
After investigation, I noticed that for the code block
if (write(power_state_fd, "mem", strlen("mem")) != strlen("mem"))
ksft_exit_fail_msg("Failed to enter Suspend state\n");
The write will return -1 and errno is set to 16 (device busy).
It should be caused by the write function is not successfully returned
before the system suspend and the return value get messed when waking up.
As a result, It may be better to check the time passed of those few
instructions to determine whether the suspend is executed correctly for
it is pretty hard to execute those few lines for 5 seconds.
The timer to wake up the system is set to expire after 5 seconds and
no re-arm. If the timer remaining time is 0 second and 0 nano secomd,
it means the timer expired and wake the system up. Otherwise, the system
could be considered to enter the suspend state failed if there is any
remaining time.
After appling this patch, the test would not fail for it believes the
system does not go to suspend by mistake. It now could continue to the
rest part of the test after suspend.
Fixes: bfd092b8c272 ("selftests: breakpoint: add step_after_suspend_test")
Reported-by: Sinadin Shan <sinadin.shan@oracle.com>
Signed-off-by: Yifei Liu <yifei.l.liu@oracle.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Insert raw strings to prevent Python3 from interpreting string literals
as Unicode strings and "\d" as invalid escaped sequence.
Fix the warnings:
tools/testing/selftests/devices/probe/test_discoverable_devices.py:48:
SyntaxWarning: invalid escape sequence '\d' usb_controller_sysfs_dir =
"usb[\d]+"
tools/testing/selftests/devices/probe/test_discoverable_devices.py: 94:
SyntaxWarning: invalid escape sequence '\d' re_usb_version =
re.compile("PRODUCT=.*/(\d)/.*")
Fixes: dacf1d7a78bf ("kselftest: Add test to verify probe of devices from discoverable buses")
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.12
A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.
|
|
This test was added because of a bug in verifier.c:sync_linked_regs(),
upon range propagation it destroyed subreg_def marks for registers.
The test is written in a way to return an upper half of a register
that is affected by range propagation and must have it's subreg_def
preserved. This gives a return value of 0 and leads to undefined
return value if subreg_def mark is not preserved.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240924210844.1758441-2-eddyz87@gmail.com
|
|
The recent addition of support for testing with the x86 specific quirk
KVM_X86_QUIRK_SLOT_ZAP_ALL disabled in the generic memslot tests broke the
build of the KVM selftests for all other architectures:
In file included from include/kvm_util.h:8,
from include/memstress.h:13,
from memslot_modification_stress_test.c:21:
memslot_modification_stress_test.c: In function ‘main’:
memslot_modification_stress_test.c:176:38: error: ‘KVM_X86_QUIRK_SLOT_ZAP_ALL’ undeclared (first use in this function)
176 | KVM_X86_QUIRK_SLOT_ZAP_ALL);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Add __x86_64__ guard defines to avoid building the relevant code on other
architectures.
Fixes: 61de4c34b51c ("KVM: selftests: Test memslot move in memslot_perf_test with quirk disabled")
Fixes: 218f6415004a ("KVM: selftests: Allow slot modification stress test with quirk disabled")
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Message-ID: <20240930-kvm-build-breakage-v1-1-866fad3cc164@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
HID test cases run tests using the run-hid-tools-tests.sh script.
When installed with "make install", the run-hid-tools-tests.sh
script will not be copied over, resulting in the following error message.
make -C tools/testing/selftests/ TARGETS=hid install \
INSTALL_PATH=$KSFT_INSTALL_PATH
cd $KSFT_INSTALL_PATH
./run_kselftest.sh -c hid
selftests: hid: hid-core.sh
bash: ./run-hid-tools-tests.sh: No such file or directory
Add the run-hid-tools-tests.sh script to the TEST_FILES in the Makefile
for it to be installed.
Fixes: ffb85d5c9e80 ("selftests: hid: import hid-tools hid-core tests")
Signed-off-by: Yun Lu <luyun@kylinos.cn>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This prevents false sharing, which makes a large difference on machines
with several NUMA nodes, such as on a dual socket Intel(R) Xeon(R) Gold
6338 CPU @ 2.00GHz, where the "bench-multi" test goes from 2.7s down to
1.9s. While this is just test code, it also forms the basis of how folks
will wind up implementing this in libraries, so we should implement this
simple cache alignment improvement here.
Suggested-by: Florian Weimer <fweimer@redhat.com>
Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
