| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
After enabling UDP GSO for devices not offering checksum offload, we have
hit a regression where a bad offload warning can be triggered when sending
a datagram with IPv6 extension headers.
Extend the UDP GSO IPv6 tests to cover this scenario.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://patch.msgid.link/20240808-udp-gso-egress-from-tunnel-v4-3-f5c5b4149ab9@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This adds some basic self-testing infrastructure for RDS-TCP.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since 2005 glibc has passed argc, argv, and envp to all constructors.
As it is cheap and easy to do so, mirror that behaviour in nolibc.
This makes it easier to migrate applications to nolibc.
Link: https://lore.kernel.org/r/20240728-nolibc-constructor-args-v1-1-36d0bf5cd4c0@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
Add tests to set TCP sockopt TCP_BPF_SOCK_OPS_CB_FLAGS via
bpf_setsockopt() and use a cgroup/getsockopt program to retrieve
the value to verify it was set.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20240808150558.1035626-3-alan.maguire@oracle.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts or adjacent changes.
Link: https://patch.msgid.link/20240808170148.3629934-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth.
Current release - regressions:
- eth: bnxt_en: fix memory out-of-bounds in bnxt_fill_hw_rss_tbl() on
older chips
Current release - new code bugs:
- ethtool: fix off-by-one error / kdoc contradicting the code for max
RSS context IDs
- Bluetooth: hci_qca:
- QCA6390: fix support on non-DT platforms
- QCA6390: don't call pwrseq_power_off() twice
- fix a NULL-pointer derefence at shutdown
- eth: ice: fix incorrect assigns of FEC counters
Previous releases - regressions:
- mptcp: fix handling endpoints with both 'signal' and 'subflow'
flags set
- virtio-net: fix changing ring count when vq IRQ coalescing not
supported
- eth: gve: fix use of netif_carrier_ok() during reconfig / reset
Previous releases - always broken:
- eth: idpf: fix bugs in queue re-allocation on reconfig / reset
- ethtool: fix context creation with no parameters
Misc:
- linkwatch: use system_unbound_wq to ease RTNL contention"
* tag 'net-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (41 commits)
net: dsa: microchip: disable EEE for KSZ8567/KSZ9567/KSZ9896/KSZ9897.
ethtool: Fix context creation with no parameters
net: ethtool: fix off-by-one error in max RSS context IDs
net: pse-pd: tps23881: include missing bitfield.h header
net: fec: Stop PPS on driver remove
net: bcmgenet: Properly overlay PHY and MAC Wake-on-LAN capabilities
l2tp: fix lockdep splat
net: stmmac: dwmac4: fix PCS duplex mode decode
idpf: fix UAFs when destroying the queues
idpf: fix memleak in vport interrupt configuration
idpf: fix memory leaks and crashes while performing a soft reset
bnxt_en : Fix memory out-of-bounds in bnxt_fill_hw_rss_tbl()
net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register()
net/smc: add the max value of fallback reason count
Bluetooth: hci_sync: avoid dup filtering when passive scanning with adv monitor
Bluetooth: l2cap: always unlock channel in l2cap_conless_channel()
Bluetooth: hci_qca: fix a NULL-pointer derefence at shutdown
Bluetooth: hci_qca: fix QCA6390 support on non-DT platforms
Bluetooth: hci_qca: don't call pwrseq_power_off() twice for QCA6390
ice: Fix incorrect assigns of FEC counts
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Nine hotfixes. Five are cc:stable, the others either pertain to
post-6.10 material or aren't considered necessary for earlier kernels.
Five are MM and four are non-MM. No identifiable theme here - please
see the individual changelogs"
* tag 'mm-hotfixes-stable-2024-08-07-18-32' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
padata: Fix possible divide-by-0 panic in padata_mt_helper()
mailmap: update entry for David Heidelberg
memcg: protect concurrent access to mem_cgroup_idr
mm: shmem: fix incorrect aligned index when checking conflicts
mm: shmem: avoid allocating huge pages larger than MAX_PAGECACHE_ORDER for shmem
mm: list_lru: fix UAF for memory cgroup
kcov: properly check for softirq context
MAINTAINERS: Update LTP members and web
selftests: mm: add s390 to ARCH check
|
|
commit 0518dbe97fe6 ("selftests/mm: fix cross compilation with LLVM")
changed the env variable for the architecture from MACHINE to ARCH.
This is preventing 3 required TEST_GEN_FILES from being included when
cross compiling s390x and errors when trying to run the test suite. This
is due to the ARCH variable already being set and the arch folder name
being s390.
Add "s390" to the filtered list to cover this case and have the 3 files
included in the build.
Link: https://lkml.kernel.org/r/20240724213517.23918-1-npache@redhat.com
Fixes: 0518dbe97fe6 ("selftests/mm: fix cross compilation with LLVM")
Signed-off-by: Nico Pache <npache@redhat.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A regression happened where running the ownership test passes on the first
iteration but fails running it a second time. This was caught and fixed,
but a later change brought it back. The regression was missed because the
automated tests only run the tests once per boot.
Change the ownership test to iterate through the tests twice, as this will
catch the regression with a single run.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add a basic uprobe testcase which checks whether add/remove/trace
operations works on /bin/sh.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The ID register for S1PIE is ID_AA64MMFR3_EL1.S1PIE which is bits 11:8 but
get-reg-list uses a shift of 4, checking SCTLRX instead. Use a shift of 8
instead.
Fixes: 5f0419a0083b ("KVM: selftests: get-reg-list: add Permission Indirection registers")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20240731-kvm-arm64-fix-s1pie-test-v1-1-a9253f3b7db4@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Add test for bpf_get_dentry_xattr on hook security_inode_getxattr.
Verify that the kfunc can read the xattr. Also test failing getxattr
from user space by returning non-zero from the LSM bpf program.
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240806230904.71194-4-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This commit adds the rcutree.nohz_full_patience_delay=1000 kernel boot
parameter to the TREE07 scenario, on the observation that "if it ain't
tested, it don't work".
Signed-off-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
Now, __constructor_order is boolean; 1 for forward-order systems,
0 for backward-order systems while parsing __LIST_APPEND().
Change it into a bool variable, and rename it for clarification.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
__constructor_order_last() is unneeded.
If __constructor_order_last() is not called on backward-order systems,
__constructor_order will remain 0 instead of being set to
_CONSTRUCTOR_ORDER_BACKWARD (= -1).
__LIST_APPEND() will still take the 'else' branch, so there is no
difference in the behavior.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add a bunch of positive selftests which extensively cover the various
contexts and parameters in which the new VFS based BPF kfuncs may be
used from.
Again, the following VFS based BPF kfuncs are thoroughly tested within
this new selftest:
* struct file *bpf_get_task_exe_file(struct task_struct *);
* void bpf_put_file(struct file *);
* int bpf_path_d_path(struct path *, char *, size_t);
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Link: https://lore.kernel.org/r/20240731110833.1834742-4-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a bunch of negative selftests responsible for asserting that the
BPF verifier successfully rejects a BPF program load when the
underlying BPF program misuses one of the newly introduced VFS based
BPF kfuncs.
The following VFS based BPF kfuncs are extensively tested within this
new selftest:
* struct file *bpf_get_task_exe_file(struct task_struct *);
* void bpf_put_file(struct file *);
* int bpf_path_d_path(struct path *, char *, size_t);
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Link: https://lore.kernel.org/r/20240731110833.1834742-3-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
copy_fd_bitmaps(new, old, count) is expected to copy the first
count/BITS_PER_LONG bits from old->full_fds_bits[] and fill
the rest with zeroes. What it does is copying enough words
(BITS_TO_LONGS(count/BITS_PER_LONG)), then memsets the rest.
That works fine, *if* all bits past the cutoff point are
clear. Otherwise we are risking garbage from the last word
we'd copied.
For most of the callers that is true - expand_fdtable() has
count equal to old->max_fds, so there's no open descriptors
past count, let alone fully occupied words in ->open_fds[],
which is what bits in ->full_fds_bits[] correspond to.
The other caller (dup_fd()) passes sane_fdtable_size(old_fdt, max_fds),
which is the smallest multiple of BITS_PER_LONG that covers all
opened descriptors below max_fds. In the common case (copying on
fork()) max_fds is ~0U, so all opened descriptors will be below
it and we are fine, by the same reasons why the call in expand_fdtable()
is safe.
Unfortunately, there is a case where max_fds is less than that
and where we might, indeed, end up with junk in ->full_fds_bits[] -
close_range(from, to, CLOSE_RANGE_UNSHARE) with
* descriptor table being currently shared
* 'to' being above the current capacity of descriptor table
* 'from' being just under some chunk of opened descriptors.
In that case we end up with observably wrong behaviour - e.g. spawn
a child with CLONE_FILES, get all descriptors in range 0..127 open,
then close_range(64, ~0U, CLOSE_RANGE_UNSHARE) and watch dup(0) ending
up with descriptor #128, despite #64 being observably not open.
The minimally invasive fix would be to deal with that in dup_fd().
If this proves to add measurable overhead, we can go that way, but
let's try to fix copy_fd_bitmaps() first.
* new helper: bitmap_copy_and_expand(to, from, bits_to_copy, size).
* make copy_fd_bitmaps() take the bitmap size in words, rather than
bits; it's 'count' argument is always a multiple of BITS_PER_LONG,
so we are not losing any information, and that way we can use the
same helper for all three bitmaps - compiler will see that count
is a multiple of BITS_PER_LONG for the large ones, so it'll generate
plain memcpy()+memset().
Reproducer added to tools/testing/selftests/core/close_range_test.c
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"A single fix to the conditional in ksft.py script which incorrectly
flags a test suite failed when there are skipped tests in the mix.
The logic is fixed to take skipped tests into account and report the
test as passed"
* tag 'linux_kselftest-fixes-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: ksft: Fix finished() helper exit code on skipped tests
|
|
Add new test cases to test_cpuset_prs.sh to cover corner cases reported
in previous fix commits.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Print more stack frames and the failing line when check fails.
This helps when tests use helpers to do the checks.
Before:
# At ./ksft/drivers/net/hw/rss_ctx.py line 92:
# Check failed 1037698 >= 396893.0 traffic on other queues:[344612, 462380, 233020, 449174, 342298]
not ok 8 rss_ctx.test_rss_context_queue_reconfigure
After:
# Check| At ./ksft/drivers/net/hw/rss_ctx.py, line 387, in test_rss_context_queue_reconfigure:
# Check| test_rss_queue_reconfigure(cfg, main_ctx=False)
# Check| At ./ksft/drivers/net/hw/rss_ctx.py, line 230, in test_rss_queue_reconfigure:
# Check| _send_traffic_check(cfg, port, ctx_ref, { 'target': (0, 3),
# Check| At ./ksft/drivers/net/hw/rss_ctx.py, line 92, in _send_traffic_check:
# Check| ksft_lt(sum(cnts[i] for i in params['noise']), directed / 2,
# Check failed 1045235 >= 405823.5 traffic on other queues (context 1)':[460068, 351995, 565970, 351579, 127270]
not ok 8 rss_ctx.test_rss_context_queue_reconfigure
Link: https://patch.msgid.link/20240801232317.545577-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Petr suggested to use errno.EOPNOTSUPP instead of hard-coded 95
in the new test case. Adjust existing ones to match this style.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20240802000309.2368-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add new @ksft_disruptive decorator to mark the tests that might
be disruptive to the system. Depending on how well the previous
test works in the CI we might want to disable disruptive tests
by default and only let the developers run them manually.
KSFT framework runs disruptive tests by default. DISRUPTIVE=False
environment (or config file) can be used to disable these tests.
ksft_setup should be called by the test cases that want to use
new decorator (ksft_setup is only called via NetDrvEnv/NetDrvEpEnv for now).
In the future we can add similar decorators to, for example, avoid
running slow tests all the time. And/or have some option to run
only 'fast' tests for some sort of smoke test scenario.
$ DISRUPTIVE=False ./stats.py
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down # SKIP marked as disruptive
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:1 error:0
v3:
- parse yes and properly treat non-zero nums as true (Petr)
v2:
- convert from cli argument to env variable (Jakub)
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20240802000309.2368-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Verify that total device stats don't decrease after it has been turned down.
Also make sure the device doesn't crash when we access per-queue stats
when it's down (in case it tries to access some pointers that are NULL).
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# Totals: pass:5 fail:0 xfail:0 xpass:0 skip:0 error:0
v3:
- use errno.EOPNOTSUPP (Petr)
- move qstat[0] under try (Petr)
v2:
- KTAP output formatting (Jakub)
- defer instead of try/finally (Jakub)
- disappearing stats is an error (Jakub)
- ksft_ge instead of open coding (Jakub)
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20240802000309.2368-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub reported bpf selftest "btf_dump" failure after forwarding to
v6.11-rc1 with netdev.
Error: #33 btf_dump
Error: #33/15 btf_dump/btf_dump: var_data
btf_dump_data:FAIL:find type id unexpected find type id: actual -2 < expected 0
The reason for the failure is due to
commit 94ede2a3e913 ("profiling: remove stale percpu flip buffer variables")
where percpu static variable "cpu_profile_flip" is removed.
Let us replace "cpu_profile_flip" with a variable in bpf subsystem
so whenever that variable gets deleted or renamed, we can detect the
failure immediately. In this case, I picked a static percpu variable
"bpf_cgrp_storage_busy" which is defined in kernel/bpf/bpf_cgrp_storage.c.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240802185434.1749056-1-yonghong.song@linux.dev
|
|
Pull kvm updates from Paolo Bonzini:
"The bulk of the changes here is a largish change to guest_memfd,
delaying the clearing and encryption of guest-private pages until they
are actually added to guest page tables. This started as "let's make
it impossible to misuse the API" for SEV-SNP; but then it ballooned a
bit.
The new logic is generally simpler and more ready for hugepage support
in guest_memfd.
Summary:
- fix latent bug in how usage of large pages is determined for
confidential VMs
- fix "underline too short" in docs
- eliminate log spam from limited APIC timer periods
- disallow pre-faulting of memory before SEV-SNP VMs are initialized
- delay clearing and encrypting private memory until it is added to
guest page tables
- this change also enables another small cleanup: the checks in
SNP_LAUNCH_UPDATE that limit it to non-populated, private pages can
now be moved in the common kvm_gmem_populate() function
- fix compilation error that the RISC-V merge introduced in selftests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: fix determination of max NPT mapping level for private pages
KVM: riscv: selftests: Fix compile error
KVM: guest_memfd: abstract how prepared folios are recorded
KVM: guest_memfd: let kvm_gmem_populate() operate only on private gfns
KVM: extend kvm_range_has_memory_attributes() to check subset of attributes
KVM: cleanup and add shortcuts to kvm_range_has_memory_attributes()
KVM: guest_memfd: move check for already-populated page to common code
KVM: remove kvm_arch_gmem_prepare_needed()
KVM: guest_memfd: make kvm_gmem_prepare_folio() operate on a single struct kvm
KVM: guest_memfd: delay kvm_gmem_prepare_folio() until the memory is passed to the guest
KVM: guest_memfd: return locked folio from __kvm_gmem_get_pfn
KVM: rename CONFIG_HAVE_KVM_GMEM_* to CONFIG_HAVE_KVM_ARCH_GMEM_*
KVM: guest_memfd: do not go through struct page
KVM: guest_memfd: delay folio_mark_uptodate() until after successful preparation
KVM: guest_memfd: return folio from __kvm_gmem_get_pfn()
KVM: x86: disallow pre-fault for SNP VMs before initialization
KVM: Documentation: Fix title underline too short warning
KVM: x86: Eliminate log spam from limited APIC timer periods
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"These are three important bug fixes for the cross-architecture tree,
fixing a regression with the new syscall.tbl file, the inconsistent
numbering for the new uretprobe syscall and a bug with iowrite64be on
alpha"
* tag 'asm-generic-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
syscalls: fix syscall macros for newfstat/newfstatat
uretprobe: change syscall number, again
alpha: fix ioread64be()/iowrite64be() helpers
|
|
Pull drm fixes from Dave Airlie:
"Regular weekly fixes. This is a bit larger than usual but doesn't seem
too crazy.
Most of it is vmwgfx changes that fix a bunch of issues with wayland
userspaces with dma-buf/external buffers and modesetting fixes.
Otherwise it's kinda spread out, v3d fixes some new ioctls, nouveau
has regression revert and fixes, amdgpu, i915 and ast have some small
fixes, and some core fixes spread about.
client:
- fix error code
atomic:
- allow damage clips with async flips
- allow explicit sync with async flips
kselftests:
- fix dmabuf-heaps test
panic:
- fix schedule_work in panic paths
panel:
- fix OrangePi Neo orientation
gpuvm:
- fix missing dependency
amdgpu:
- SMU 14.x update
- Fix contiguous VRAM handling for IB parsing
- GFX 12 fix
- Regression fix for old APUs
i915:
- Static analysis fix for int overflow
- Fix for HDCP2_STREAM_STATUS macro and removal of PWR_CLK_STATE for gen12
nouveau:
- revert busy wait change that caused a resume regression
- fix buffer placement fault on dynamic pm s/r
- fix refcount underflow
ast:
- fix black screen on resume
- wake during connector status detect
v3d:
- fix issues with perf/timestamp ioctls
vmwgfx:
- fix deadlock in dma-buf fence polling
- fix screen surface refcounting
- fix dumb buffer handling
- fix support for external buffers
- fix overlay with screen targets
- trigger modeset on screen moves"
* tag 'drm-fixes-2024-08-02' of https://gitlab.freedesktop.org/drm/kernel: (31 commits)
Revert "nouveau: rip out busy fence waits"
nouveau: set placement to original placement on uvmm validate.
drm/atomic: Allow userspace to use damage clips with async flips
drm/atomic: Allow userspace to use explicit sync with atomic async flips
drm/i915: Fix possible int overflow in skl_ddi_calculate_wrpll()
drm/i915/hdcp: Fix HDCP2_STREAM_STATUS macro
drm/ast: astdp: Wake up during connector status detection
i915/perf: Remove code to update PWR_CLK_STATE for gen12
kselftests: dmabuf-heaps: Ensure the driver name is null-terminated
drm/client: Fix error code in drm_client_buffer_vmap_local()
drm/amdgpu: Fix APU handling in amdgpu_pm_load_smu_firmware()
drm/amdgpu: increase mes log buffer size for gfx12
drm/amdgpu: fix contiguous handling for IB parsing v2
drm/amdgpu/pm: support gpu_metrics sysfs interface for smu v14.0.2/3
drm/vmwgfx: Trigger a modeset when the screen moves
drm/vmwgfx: Fix overlay when using Screen Targets
drm/vmwgfx: Add basic support for external buffers
drm/vmwgfx: Fix handling of dumb buffers
drm/vmwgfx: Make sure the screen surface is ref counted
drm/vmwgfx: Fix a deadlock in dma buf fence polling
...
|
|
Despite multiple attempts to get the syscall number assignment right
for the newly added uretprobe syscall, we ended up with a bit of a mess:
- The number is defined as 467 based on the assumption that the
xattrat family of syscalls would use 463 through 466, but those
did not make it into 6.11.
- The include/uapi/asm-generic/unistd.h file still lists the number
463, but the new scripts/syscall.tbl that was supposed to have the
same data lists 467 instead as the number for arc, arm64, csky,
hexagon, loongarch, nios2, openrisc and riscv. None of these
architectures actually provide a uretprobe syscall.
- All the other architectures (powerpc, arm, mips, ...) don't list
this syscall at all.
There are two ways to make it consistent again: either list it with
the same syscall number on all architectures, or only list it on x86
but not in scripts/syscall.tbl and asm-generic/unistd.h.
Based on the most recent discussion, it seems like we won't need it
anywhere else, so just remove the inconsistent assignment and instead
move the x86 number to the next available one in the architecture
specific range, which is 335.
Fixes: 5c28424e9a34 ("syscalls: Fix to add sys_uretprobe to syscall.tbl")
Fixes: 190fec72df4a ("uprobe: Wire up uretprobe system call")
Fixes: 63ded110979b ("uprobe: Change uretprobe syscall scope and number")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add a few new tests to exercise the signal handler flow, especially with
PKEY 0 disabled:
- Verify that the SIGSEGV handler is invoked when pkey 0 is disabled.
- Verify that a thread which disables PKEY 0 segfaults with PKUERR when
accessing the stack.
- Verify that the SIGSEGV handler that uses an alternate signal stack is
correctly invoked when the thread disabled PKEY 0
- Verify that the PKRU value set by the application is correctly restored
upon return from signal handling.
- Verify that sigreturn() is able to restore the altstack even if the
thread had PKEY 0 disabled
[ Aruna: Adapted to upstream ]
[ tglx: Made it actually compile. Restored protection_keys compile. Added
useful info to the changelog instead of bare function names. ]
Signed-off-by: Keith Lucas <keith.lucas@oracle.com>
Signed-off-by: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240802061318.2140081-6-aruna.ramakrishna@oracle.com
|
|
This way uprobe_unregister() and uprobe_apply() can use "struct uprobe *"
rather than inode + offset. This simplifies the code and allows to avoid
the unnecessary find_uprobe() + put_uprobe() in these functions.
TODO: uprobe_unregister() still needs get_uprobe/put_uprobe to ensure that
this uprobe can't be freed before up_write(&uprobe->register_rwsem).
Co-developed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240801132734.GA8803@redhat.com
|
|
It doesn't make any sense to have 2 versions of _register(). Note that
trace_uprobe_enable(), the only user of uprobe_register(), doesn't need
to check tu->ref_ctr_offset to decide which one should be used, it could
safely pass ref_ctr_offset == 0 to uprobe_register_refctr().
Add this argument to uprobe_register(), update the callers, and kill
uprobe_register_refctr().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240801132728.GA8800@redhat.com
|
|
testmod_unregister_uprobe() forgets to path_put(&uprobe.path).
Signed-off-by: Jiri Olsa <olsajiri@gmail.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240801132724.GA8791@redhat.com
|
|
It should be quite uncommon to set both the subflow and the signal
flags: the initiator of the connection is typically the one creating new
subflows, not the other peer, then no need to announce additional local
addresses, and use it to create subflows.
But some people might be confused about the flags, and set both "just to
be sure at least the right one is set". To verify the previous fix, and
avoid future regressions, this specific case is now validated: the
client announces a new address, and initiates a new subflow from the
same address.
While working on this, another bug has been noticed, where the client
reset the new subflow because an ADD_ADDR echo got received as the 3rd
ACK: this new test also explicitly checks that no RST have been sent by
the client and server.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-7-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the following commit, the client will initiate the ADD_ADDR, instead
of the server. We need to way to verify the ADD_ADDR have been correctly
sent.
Note: the default expected counters for when the port number is given
are never changed by the caller, no need to accept them as parameter
then.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-6-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The acct() system call enables or disables process accounting.
If accounting is turned on, records for each terminating process
are appended to a specified filename as it terminates. An argument of NULL
causes accounting to be turned off.
This patch will add a test for the acct() syscall.
Signed-off-by: Abdulrasaq Lawani <abdulrasaqolawani@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The strscpy test loads test_strscpy module for testing. But test_strscpy
was converted to Kunit (see fixes). Hence remove strscpy.
Fixes: 41eefc46a3a4 ("string: Convert strscpy() self-test to KUnit")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The user test suite has only one test, test_user_copy which loads
test_user_copy module for testing. But test_user_copy module has already
been converted to kunit (see fixes). Hence remove the entire suite.
Fixes: cf6219ee889f ("usercopy: Convert test_user_copy to KUnit test")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wireless, bleutooth, BPF and netfilter.
Current release - regressions:
- core: drop bad gso csum_start and offset in virtio_net_hdr
- wifi: mt76: fix null pointer access in mt792x_mac_link_bss_remove
- eth: tun: add missing bpf_net_ctx_clear() in do_xdp_generic()
- phy: aquantia: only poll GLOBAL_CFG regs on aqr113, aqr113c and
aqr115c
Current release - new code bugs:
- smc: prevent UAF in inet_create()
- bluetooth: btmtk: fix kernel crash when entering btmtk_usb_suspend
- eth: bnxt: reject unsupported hash functions
Previous releases - regressions:
- sched: act_ct: take care of padding in struct zones_ht_key
- netfilter: fix null-ptr-deref in iptable_nat_table_init().
- tcp: adjust clamping window for applications specifying SO_RCVBUF
Previous releases - always broken:
- ethtool: rss: small fixes to spec and GET
- mptcp:
- fix signal endpoint re-add
- pm: fix backup support in signal endpoints
- wifi: ath12k: fix soft lockup on suspend
- eth: bnxt_en: fix RSS logic in __bnxt_reserve_rings()
- eth: ice: fix AF_XDP ZC timeout and concurrency issues
- eth: mlx5:
- fix missing lock on sync reset reload
- fix error handling in irq_pool_request_irq"
* tag 'net-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
mptcp: fix duplicate data handling
mptcp: fix bad RCVPRUNED mib accounting
ipv6: fix ndisc_is_useropt() handling for PIO
igc: Fix double reset adapter triggered from a single taprio cmd
net: MAINTAINERS: Demote Qualcomm IPA to "maintained"
net: wan: fsl_qmc_hdlc: Discard received CRC
net: wan: fsl_qmc_hdlc: Convert carrier_lock spinlock to a mutex
net/mlx5e: Add a check for the return value from mlx5_port_set_eth_ptys
net/mlx5e: Fix CT entry update leaks of modify header context
net/mlx5e: Require mlx5 tc classifier action support for IPsec prio capability
net/mlx5: Fix missing lock on sync reset reload
net/mlx5: Lag, don't use the hardcoded value of the first port
net/mlx5: DR, Fix 'stack guard page was hit' error in dr_rule
net/mlx5: Fix error handling in irq_pool_request_irq
net/mlx5: Always drain health in shutdown callback
net: Add skbuff.h to MAINTAINERS
r8169: don't increment tx_dropped in case of NETDEV_TX_BUSY
netfilter: iptables: Fix potential null-ptr-deref in ip6table_nat_table_init().
netfilter: iptables: Fix null-ptr-deref in iptable_nat_table_init().
net: drop bad gso csum_start and offset in virtio_net_hdr
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-07-31
We've added 2 non-merge commits during the last 2 day(s) which contain
a total of 2 files changed, 2 insertions(+), 2 deletions(-).
The main changes are:
1) Fix BPF selftest build after tree sync with regards to a _GNU_SOURCE
macro redefined compilation error, from Stanislav Fomichev.
2) Fix a wrong test in the ASSERT_OK() check in uprobe_syscall BPF selftest,
from Jiri Olsa.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf/selftests: Fix ASSERT_OK condition check in uprobe_syscall test
selftests/bpf: Filter out _GNU_SOURCE when compiling test_cpp
====================
Link: https://patch.msgid.link/20240731115706.19677-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We already have some testcases verifying that we can call
BPF_PROG_TYPE_SYSCALL progs and invoke scx_bpf_exit(). Let's extend that to
also call scx_bpf_create_dsq() so we get coverage for that as well.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add RTC wakeup alarm for devices to resume after specific time interval.
This improvement in the test will help in enabling this test
in the CI systems and will eliminate the need of manual intervention
for resuming back the devices after suspend/hibernation.
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Replace "not ... nor" in the error message with "neither ... nor".
Signed-off-by: Chang Yu <marcus.yu.56@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The python unittest module writes all its output to stderr, even when
the run is clean. Redirect its output logs to stdout.
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The Python finished() helper currently exits with KSFT_FAIL when there
are only passed and skipped tests. Fix the logic to exit with KSFT_PASS
instead, making it consistent with its C and bash counterparts
(ksft_finished() and ktap_finished() respectively).
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Fixes: dacf1d7a78bf ("kselftest: Add test to verify probe of devices from discoverable buses")
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Current cgroup_dev test mostly tests that device operation is accepted or
refused base on passed major/minor (and so, any operation performed during
test involves only char device)
Add a small subtest ensuring that the device type passed to bpf program
allows it to take decisions as well.
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20240731-convert_dev_cgroup-v4-3-849425d90de6@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
test_dev_cgroup is defined as a standalone test program, and so is not
executed in CI.
Convert it to test_progs framework so it is tested automatically in CI, and
remove the old test. In order to be able to run it in test_progs, /dev/null
must remain usable, so change the new test to test operations on devices
1:3 as valid, and operations on devices 1:5 (/dev/zero) as invalid.
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20240731-convert_dev_cgroup-v4-2-849425d90de6@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
test_dev_cgroup currently loads a small bpf program allowing any access on
urandom and zero devices, disabling access to any other device. It makes
migrating this test to test_progs impossible, since this one manipulates
extensively /dev/null.
Allow /dev/null manipulation in dev_cgroup program to make its usage in
test_progs framework possible. Update test_dev_cgroup.c as well to match
this change while it has not been removed.
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20240731-convert_dev_cgroup-v4-1-849425d90de6@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
