| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 101c268bd2f37e965a5468353e62d154db38838e upstream.
In support of investigating an initialization failure report [1],
cxl_test was updated to register mock memory-devices after the mock
root-port/bus device had been registered. That led to cxl_test crashing
with a use-after-free bug with the following signature:
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem0:decoder7.0 @ 0 next: cxl_switch_uport.0 nr_eps: 1 nr_targets: 1
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem4:decoder14.0 @ 1 next: cxl_switch_uport.0 nr_eps: 2 nr_targets: 1
cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[0] = cxl_switch_dport.0 for mem0:decoder7.0 @ 0
1) cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[1] = cxl_switch_dport.4 for mem4:decoder14.0 @ 1
[..]
cxld_unregister: cxl decoder14.0:
cxl_region_decode_reset: cxl_region region3:
mock_decoder_reset: cxl_port port3: decoder3.0 reset
2) mock_decoder_reset: cxl_port port3: decoder3.0: out of order reset, expected decoder3.1
cxl_endpoint_decoder_release: cxl decoder14.0:
[..]
cxld_unregister: cxl decoder7.0:
3) cxl_region_decode_reset: cxl_region region3:
Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bc3: 0000 [#1] PREEMPT SMP PTI
[..]
RIP: 0010:to_cxl_port+0x8/0x60 [cxl_core]
[..]
Call Trace:
<TASK>
cxl_region_decode_reset+0x69/0x190 [cxl_core]
cxl_region_detach+0xe8/0x210 [cxl_core]
cxl_decoder_kill_region+0x27/0x40 [cxl_core]
cxld_unregister+0x5d/0x60 [cxl_core]
At 1) a region has been established with 2 endpoint decoders (7.0 and
14.0). Those endpoints share a common switch-decoder in the topology
(3.0). At teardown, 2), decoder14.0 is the first to be removed and hits
the "out of order reset case" in the switch decoder. The effect though
is that region3 cleanup is aborted leaving it in-tact and
referencing decoder14.0. At 3) the second attempt to teardown region3
trips over the stale decoder14.0 object which has long since been
deleted.
The fix here is to recognize that the CXL specification places no
mandate on in-order shutdown of switch-decoders, the driver enforces
in-order allocation, and hardware enforces in-order commit. So, rather
than fail and leave objects dangling, always remove them.
In support of making cxl_region_decode_reset() always succeed,
cxl_region_invalidate_memregion() failures are turned into warnings.
Crashing the kernel is ok there since system integrity is at risk if
caches cannot be managed around physical address mutation events like
CXL region destruction.
A new device_for_each_child_reverse_from() is added to cleanup
port->commit_end after all dependent decoders have been disabled. In
other words if decoders are allocated 0->1->2 and disabled 1->2->0 then
port->commit_end only decrements from 2 after 2 has been disabled, and
it decrements all the way to zero since 1 was disabled previously.
Link: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net [1]
Cc: stable@vger.kernel.org
Fixes: 176baefb2eb5 ("cxl/hdm: Commit decoder state to hardware")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/172964782781.81806.17902885593105284330.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ece5897e5a10fcd56a317e32f2dc7219f366a5a8 upstream.
Commit e6d2c436ff693 ("tools/mm: allow users to provide additional
cflags/ldflags") passes now CFLAGS to Makefile. With this, build systems
with default -Werror enabled found:
slabinfo.c:1300:25: error: ignoring return value of 'chdir'
declared with attribute 'warn_unused_result' [-Werror=unused-result]
chdir("..");
^~~~~~~~~~~
page-types.c:397:35: error: format '%lu' expects argument of type
'long unsigned int', but argument 2 has type 'uint64_t'
{aka 'long long unsigned int'} [-Werror=format=]
printf("%lu\t", mapcnt0);
~~^ ~~~~~~~
..
Fix page-types by using PRIu64 for uint64_t prints and check in slabinfo
for return code on chdir("..").
Link: https://lkml.kernel.org/r/c1ceb507-94bc-461c-934d-c19b77edd825@gmail.com
Fixes: e6d2c436ff69 ("tools/mm: allow users to provide additional cflags/ldflags")
Signed-off-by: Wladislav Wiebe <wladislav.kw@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Herton R. Krzesinski <herton@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3673167a3a07f25b3f06754d69f406edea65543a upstream.
This reverts commit e61ef21e27e8deed8c474e9f47f4aa7bc37e138c.
uffd_poll_thread may be called by other tests that do not initialize the
pthread_barrier, so this approach is not correct. This will revert to
using atomic_bool instead.
Link: https://lkml.kernel.org/r/20241018171734.2315053-3-edliaw@google.com
Fixes: e61ef21e27e8 ("selftests/mm: replace atomic_bool with pthread_barrier_t")
Signed-off-by: Edward Liaw <edliaw@google.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5bb1f4c9340e01003b00b94d539eadb0da88f48e upstream.
Patch series "selftests/mm: revert pthread_barrier change"
On Android arm, pthread_create followed by a fork caused a deadlock in
the case where the fork required work to be completed by the created
thread.
The previous patches incorrectly assumed that the parent would
always initialize the pthread_barrier for the child thread. This
reverts the change and replaces the fix for wp-fork-with-event with the
original use of atomic_bool.
This patch (of 3):
This reverts commit e142cc87ac4ec618f2ccf5f68aedcd6e28a59d9d.
fork_event_consumer may be called by other tests that do not initialize
the pthread_barrier, so this approach is not correct. The subsequent
patch will revert to using atomic_bool instead.
Link: https://lkml.kernel.org/r/20241018171734.2315053-1-edliaw@google.com
Link: https://lkml.kernel.org/r/20241018171734.2315053-2-edliaw@google.com
Fixes: e142cc87ac4e ("fix deadlock for fork after pthread_create on ARM")
Signed-off-by: Edward Liaw <edliaw@google.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e7cd4b811c9e019f5acbce85699c622b30194c24 upstream.
The detach_port() doesn't return error
when detach is attempted on an invalid port.
Fixes: 40ecdeb1a187 ("usbip: usbip_detach: fix to check for invalid ports")
Cc: stable@vger.kernel.org
Reviewed-by: Hongren Zheng <i@zenithal.me>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Zongmin Zhou <zhouzongmin@kylinos.cn>
Link: https://lore.kernel.org/r/20241024022700.1236660-1-min_halo@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 758f18158952a6287ac23679ec04c32d44ca5368 ]
Noticed while building on a raspbian arm 32-bit system.
There was also this other case, fixed by adding a missing util/stat.h
with the prototypes:
/tmp/tmp.MbiSHoF3dj/perf-6.12.0-rc3/tools/perf/util/python.c:1396:6: error: no previous prototype for ‘perf_stat__set_no_csv_summary’ [-Werror=missing-prototypes]
1396 | void perf_stat__set_no_csv_summary(int set __maybe_unused)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/tmp/tmp.MbiSHoF3dj/perf-6.12.0-rc3/tools/perf/util/python.c:1400:6: error: no previous prototype for ‘perf_stat__set_big_num’ [-Werror=missing-prototypes]
1400 | void perf_stat__set_big_num(int set __maybe_unused)
| ^~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
In other architectures this must be building due to some lucky indirect
inclusion of that header.
Fixes: 9dabf4003423c8d3 ("perf python: Switch module to linking libraries from building source")
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZxllAtpmEw5fg9oy@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5d35634ecc2d2c3938bd7dc23df0ad046da1b303 ]
This fixes a build breakage on 32-bit arm, where the
syscalltbl__id_at_idx() function was missing.
Committer notes:
Generating a proper syscall table from a copy of
arch/arm/tools/syscall.tbl ends up being too big a patch for this rc
stage, I started doing it but while testing noticed some other problems
with using BPF to collect pointer args on arm7 (32-bit) will maybe
continue trying to make it work on the next cycle...
Fixes: 7a2fb5619cc1fb53 ("perf trace: Fix iteration of syscall ids in syscalltbl->entries")
Suggested-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: <jslaby@suse.cz>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/lkml/3a592835-a14f-40be-8961-c0cee7720a94@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c2f803052bc7a7feb2e03befccc8e49b6ff1f5f5 ]
There is an out-of-bounds read in bpf_link_show_fdinfo() for the sockmap
link fd. Fix it by adding the missing BPF_LINK_TYPE invocation for
sockmap link
Also add comments for bpf_link_type to prevent missing updates in the
future.
Fixes: 699c23f02c65 ("bpf: Add bpf_link support for sk_msg and sk_skb progs")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241024013558.1135167-2-houtao@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fd526e121c4d6f71aed82d21a8b8277b03e60b43 ]
Linking of urandom_read and liburandom_read.so prefers LLVM's 'ld.lld' but
falls back to using 'ld' if unsupported. However, this fallback discards
any existing makefile macro for LD and can break cross-compilation.
Fix by changing the fallback to use the target linker $(LD), passed via
'-fuse-ld=' using an absolute path rather than a linker "flavour".
Fixes: 08c79c9cd67f ("selftests/bpf: Don't force lld on non-x86 architectures")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241009040720.635260-1-tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4538a38f654a1c292fe489a9b66179262bfed088 ]
Fix `name_len` field assertions in `bpf_link_info.perf_event` for
kprobe/uprobe/tracepoint to validate correct name size instead of 0.
Fixes: 23cf7aa539dc ("selftests/bpf: Add selftest for fill_link_info")
Signed-off-by: Tyrone Wu <wudevelops@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20241008164312.46269-2-wudevelops@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit fe05c40ca9c18cfdb003f639a30fc78a7ab49519 upstream.
Commit 160c826b4dd0 ("selftest: hid: add missing run-hid-tools-tests.sh")
has added the run-hid-tools-tests.sh script for it to be installed, but
I forgot to add the tests directory together.
If running the test case without the tests directory, will results in
the following error message:
make -C tools/testing/selftests/ TARGETS=hid install \
INSTALL_PATH=$KSFT_INSTALL_PATH
cd $KSFT_INSTALL_PATH
./run_kselftest.sh -t hid:hid-core.sh
/usr/lib/python3.11/site-packages/_pytest/config/__init__.py:331: PluggyTeardownRaisedWarning: A plugin raised an exception during an old-style hookwrapper teardown.
Plugin: helpconfig, Hook: pytest_cmdline_parse
UsageError: usage: __main__.py [options] [file_or_dir] [file_or_dir] [...]
__main__.py: error: unrecognized arguments: --udevd
inifile: None
rootdir: /root/linux/kselftest_install/hid
In fact, the run-hid-tools-tests.sh script uses the scripts in the tests
directory to run tests. The tests directory also needs to be added to be
installed.
Fixes: ffb85d5c9e80 ("selftests: hid: import hid-tools hid-core tests")
Cc: stable@vger.kernel.org
Signed-off-by: Yun Lu <luyun@kylinos.cn>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e142cc87ac4ec618f2ccf5f68aedcd6e28a59d9d upstream.
On Android with arm, there is some synchronization needed to avoid a
deadlock when forking after pthread_create.
Link: https://lkml.kernel.org/r/20241003211716.371786-3-edliaw@google.com
Fixes: cff294582798 ("selftests/mm: extend and rename uffd pagemap test")
Signed-off-by: Edward Liaw <edliaw@google.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e61ef21e27e8deed8c474e9f47f4aa7bc37e138c upstream.
Patch series "selftests/mm: fix deadlock after pthread_create".
On Android arm, pthread_create followed by a fork caused a deadlock in the
case where the fork required work to be completed by the created thread.
Update the synchronization primitive to use pthread_barrier instead of
atomic_bool.
Apply the same fix to the wp-fork-with-event test.
This patch (of 2):
Swap synchronization primitive with pthread_barrier, so that stdatomic.h
does not need to be included.
The synchronization is needed on Android ARM64; we see a deadlock with
pthread_create when the parent thread races forward before the child has a
chance to start doing work.
Link: https://lkml.kernel.org/r/20241003211716.371786-1-edliaw@google.com
Link: https://lkml.kernel.org/r/20241003211716.371786-2-edliaw@google.com
Fixes: cff294582798 ("selftests/mm: extend and rename uffd pagemap test")
Signed-off-by: Edward Liaw <edliaw@google.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5afca7e996c42aed1b4a42d4712817601ba42aff upstream.
Explicitly verify that MPC connection attempts towards a port-based
signal endpoint fail with a reset.
Note that this new test is a bit different from the other ones, not
using 'run_tests'. It is then needed to add the capture capability, and
the picking the right port which have been extracted into three new
helpers. The info about the capture can also be printed from a single
point, which simplifies the exit paths in do_transfer().
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 1729cf186d8a ("mptcp: create the listening socket for new port")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241014-net-mptcp-mpc-port-endp-v2-2-7faea8e6b6ae@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a0cc649353bb726d4aa0db60dce467432197b746 upstream.
Adapt the rseq.c/rseq.h code to follow GNU C library changes introduced by:
glibc commit 2e456ccf0c34 ("Linux: Make __rseq_size useful for feature detection (bug 31965)")
Without this fix, rseq selftests for mm_cid fail:
./run_param_test.sh
Default parameters
Running test spinlock
Running compare-twice test spinlock
Running mm_cid test spinlock
Error: cpu id getter unavailable
Fixes: 18c2355838e7 ("selftests/rseq: Implement rseq mm_cid field support")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
CC: Boqun Feng <boqun.feng@gmail.com>
CC: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
CC: Carlos O'Donell <carlos@redhat.com>
CC: Florian Weimer <fweimer@redhat.com>
CC: linux-kselftest@vger.kernel.org
CC: stable@vger.kernel.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 76503e1fa1a53ef041a120825d5ce81c7fe7bdd7 upstream.
The hmm2 double_map test was failing due to an incorrect buffer->mirror
size. The buffer->mirror size was 6, while buffer->ptr size was 6 *
PAGE_SIZE. The test failed because the kernel's copy_to_user function was
attempting to copy a 6 * PAGE_SIZE buffer to buffer->mirror. Since the
size of buffer->mirror was incorrect, copy_to_user failed.
This patch corrects the buffer->mirror size to 6 * PAGE_SIZE.
Test Result without this patch
==============================
# RUN hmm2.hmm2_device_private.double_map ...
# hmm-tests.c:1680:double_map:Expected ret (-14) == 0 (0)
# double_map: Test terminated by assertion
# FAIL hmm2.hmm2_device_private.double_map
not ok 53 hmm2.hmm2_device_private.double_map
Test Result with this patch
===========================
# RUN hmm2.hmm2_device_private.double_map ...
# OK hmm2.hmm2_device_private.double_map
ok 53 hmm2.hmm2_device_private.double_map
Link: https://lkml.kernel.org/r/20240927050752.51066-1-donettom@linux.ibm.com
Fixes: fee9f6d1b8df ("mm/hmm/test: add selftests for HMM")
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9f49d14ec41ce7be647028d7d34dea727af55272 ]
Currently, the second bridge command overwrites the first one.
Fix this by adding this VID to the interface behind $swp2.
The one_bridge_two_pvids() test intends to check that there is no
leakage of traffic between bridge ports which have a single VLAN - the
PVID VLAN.
Because of a typo, port $swp1 is configured with a PVID twice (second
command overwrites first), and $swp2 isn't configured at all (and since
the bridge vlan_default_pvid property is set to 0, this port will not
have a PVID at all, so it will drop all untagged and priority-tagged
traffic).
So, instead of testing the configuration that was intended, we are
testing a different one, where one port has PVID 2 and the other has
no PVID. This incorrect version of the test should also pass, but is
ineffective for its purpose, so fix the typo.
This typo has an impact on results of the test,
potentially leading to wrong conclusions regarding
the functionality of a network device.
The tests results:
TEST: Switch ports in VLAN-aware bridge with different PVIDs:
Unicast non-IP untagged [ OK ]
Multicast non-IP untagged [ OK ]
Broadcast non-IP untagged [ OK ]
Unicast IPv4 untagged [ OK ]
Multicast IPv4 untagged [ OK ]
Unicast IPv6 untagged [ OK ]
Multicast IPv6 untagged [ OK ]
Unicast non-IP VID 1 [ OK ]
Multicast non-IP VID 1 [ OK ]
Broadcast non-IP VID 1 [ OK ]
Unicast IPv4 VID 1 [ OK ]
Multicast IPv4 VID 1 [ OK ]
Unicast IPv6 VID 1 [ OK ]
Multicast IPv6 VID 1 [ OK ]
Unicast non-IP VID 4094 [ OK ]
Multicast non-IP VID 4094 [ OK ]
Broadcast non-IP VID 4094 [ OK ]
Unicast IPv4 VID 4094 [ OK ]
Multicast IPv4 VID 4094 [ OK ]
Unicast IPv6 VID 4094 [ OK ]
Multicast IPv6 VID 4094 [ OK ]
Fixes: 476a4f05d9b8 ("selftests: forwarding: add a no_forwarding.sh test")
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Kacper Ludwinski <kac.ludwinski@icloud.com>
Link: https://patch.msgid.link/20241002051016.849-1-kac.ludwinski@icloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3c6b818b097dd6932859bcc3d6722a74ec5931c1 ]
Added a check to handle memory allocation failure for `trigger_name`
and return `-ENOMEM`.
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Link: https://patch.msgid.link/20240828093129.3040-1-zhujun2@cmss.chinamobile.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2351e8c65404aabc433300b6bf90c7a37e8bbc4d ]
Some distros have grub2 config files with the lines
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
which match the skip regex defined for grub2 in get_grub_index():
$skip = '^\s*menuentry';
These false positives cause the grub number to be higher than it
should be, and the wrong kernel can end up booting.
Grub documents the menuentry command with whitespace between it and the
title, so make the skip regex reflect this.
Link: https://lore.kernel.org/20240904175530.84175-1-daniel.m.jordan@oracle.com
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: John 'Warthog9' Hawley (Tenstorrent) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b8e188f023e07a733b47d5865311ade51878fe40 ]
The assumption of 'in privileged mode reads from uninitialized stack locations
are permitted' is not quite correct since the verifier was probing for read
access rather than write access. Both tests need to be annotated as __success
for privileged and unprivileged.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240913191754.13290-6-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a530337ba9ef601c93ec378fd941be43f587d563 ]
For libdw versions below 0.177, need to link libdl.a in addition to
libbebl.a during static compilation, otherwise
feature-dwarf_getlocations compilation will fail.
Before:
$ make LDFLAGS=-static
BUILD: Doing 'make -j20' parallel build
<SNIP>
Makefile.config:483: Old libdw.h, finding variables at given 'perf probe' point will not work, install elfutils-devel/libdw-dev >= 0.157
<SNIP>
$ cat ../build/feature/test-dwarf_getlocations.make.output
/usr/bin/ld: /usr/lib/gcc/x86_64-linux-gnu/9/../../../x86_64-linux-gnu/libebl.a(eblclosebackend.o): in function `ebl_closebackend':
(.text+0x20): undefined reference to `dlclose'
collect2: error: ld returned 1 exit status
After:
$ make LDFLAGS=-static
<SNIP>
Auto-detecting system features:
... dwarf: [ on ]
<SNIP>
$ ./perf probe
Usage: perf probe [<options>] 'PROBEDEF' ['PROBEDEF' ...]
or: perf probe [<options>] --add 'PROBEDEF' [--add 'PROBEDEF' ...]
or: perf probe [<options>] --del '[GROUP:]EVENT' ...
or: perf probe --list [GROUP:]EVENT ...
<SNIP>
Fixes: 536661da6ea18fe6 ("perf: build: Only link libebl.a for old libdw")
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240919013513.118527-3-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 43f6564f18bf5b27e1675ef6f4baf68e786396b2 ]
If libdw is not installed in build environment, the output of
'pkg-config --modversion libdw' is empty, causing LIBDW_VERSION_2 to be
empty and the shell test will have the following error:
/bin/sh: 1: test: -lt: unexpected operator
Before:
$ pkg-config --modversion libdw
Package libdw was not found in the pkg-config search path.
Perhaps you should add the directory containing `libdw.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libdw' found
$ make LDFLAGS=-static -j16
BUILD: Doing 'make -j20' parallel build
<SNIP>
Package libdw was not found in the pkg-config search path.
Perhaps you should add the directory containing `libdw.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libdw' found
/bin/sh: 1: test: -lt: unexpected operator
After:
1. libdw is not installed:
$ pkg-config --modversion libdw
Package libdw was not found in the pkg-config search path.
Perhaps you should add the directory containing `libdw.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libdw' found
$ make LDFLAGS=-static -j16
BUILD: Doing 'make -j20' parallel build
<SNIP>
Package libdw was not found in the pkg-config search path.
Perhaps you should add the directory containing `libdw.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libdw' found
Makefile.config:473: No libdw DWARF unwind found, Please install elfutils-devel/libdw-dev >= 0.158 and/or set LIBDW_DIR
2. libdw version is lower than 0.177
$ pkg-config --modversion libdw
0.176
$ make LDFLAGS=-static -j16
BUILD: Doing 'make -j20' parallel build
<SNIP>
Auto-detecting system features:
... dwarf: [ on ]
<SNIP>
INSTALL libsubcmd_headers
INSTALL libapi_headers
INSTALL libperf_headers
INSTALL libsymbol_headers
INSTALL libbpf_headers
LINK perf
3. libdw version is higher than 0.177
$ pkg-config --modversion libdw
0.186
$ make LDFLAGS=-static -j16
BUILD: Doing 'make -j20' parallel build
<SNIP>
Auto-detecting system features:
... dwarf: [ on ]
<SNIP>
CC util/bpf-utils.o
CC util/pfm.o
LD util/perf-util-in.o
LD perf-util-in.o
AR libperf-util.a
LINK perf
Fixes: 536661da6ea18fe6 ("perf: build: Only link libebl.a for old libdw")
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240919013513.118527-2-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 424aafb61a0b98d7d242f447fdb84bb8b323e8a8 ]
If the dso type doesn't match then NULL is returned but the dso should
be put first.
Fixes: f649ed80f3cabbf1 ("perf dsos: Tidy reference counting and locking")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240912182757.762369-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit b81162302001f41157f6e93654aaccc30e817e2a upstream.
We'll need to check if an warning option introduced in clang 19 is
available on the clang version being used, so cover the error message
emitted when testing for a -W option.
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/CA+icZUVtHn8X1Tb_Y__c-WswsO0K8U9uy3r2MzKXwTA5THtL7w@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9af2efee41b27a0f386fb5aa95d8d0b4b5d9fede upstream.
The fields in the hist_entry are filled on-demand which means they only
have meaningful values when relevant sort keys are used.
So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in
the hist entry can be garbage. So it shouldn't access it
unconditionally.
I got a segfault, when I wanted to see cgroup profiles.
$ sudo perf record -a --all-cgroups --synth=cgroup true
$ sudo perf report -s cgroup
Program received signal SIGSEGV, Segmentation fault.
0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48
48 return RC_CHK_ACCESS(map)->dso;
(gdb) bt
#0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48
#1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344
#2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385
#3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true)
at util/hist.c:644
#4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0,
block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761
#5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0,
sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779
#6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015
#7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0)
at util/hist.c:1260
#8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0,
machine=0x5555560388e8) at builtin-report.c:334
#9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128,
sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232
#10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128,
sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271
#11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0,
file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354
#12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132
#13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245
#14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324
#15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342
#16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60)
at util/session.c:780
#17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688,
file_path=0x555556038ff0 "perf.data") at util/session.c:1406
As you can see the entry->ms.map was NULL even if he->ms.map has a
value. This is because 'sym' sort key is not given, so it cannot assume
whether he->ms.sym and entry->ms.sym is the same. I only checked the
'sym' sort key here as it implies 'dso' behavior (so maps are the same).
Fixes: ac01c8c4246546fd ("perf hist: Update hist symbol when updating maps")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Matt Fleming <matt@readmodwrite.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240826221045.1202305-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3d7b8ea7a8a20a45d019382c4dc6ed79e8bb95cf upstream.
The help text in osnoise top and timerlat top had some minor errors
and omissions. The -d option was missing the 's' (second) abbreviation and
the error message for '-d' used '-D'.
Cc: stable@vger.kernel.org
Fixes: 1eceb2fc2ca54 ("rtla/osnoise: Add osnoise top mode")
Fixes: a828cd18bc4ad ("rtla: Add timerlat tool and timelart top mode")
Link: https://lore.kernel.org/20240813155831.384446-1-ezulian@redhat.com
Suggested-by: Tomas Glozar <tglozar@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Eder Zulian <ezulian@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f30beffd977e98c33550bbeb6f278d157ff54844 upstream.
grep -rnIF "#define __NR_userfaultfd"
tools/include/uapi/asm-generic/unistd.h:681:#define __NR_userfaultfd 282
arch/x86/include/generated/uapi/asm/unistd_32.h:374:#define
__NR_userfaultfd 374
arch/x86/include/generated/uapi/asm/unistd_64.h:327:#define
__NR_userfaultfd 323
arch/x86/include/generated/uapi/asm/unistd_x32.h:282:#define
__NR_userfaultfd (__X32_SYSCALL_BIT + 323)
arch/arm/include/generated/uapi/asm/unistd-eabi.h:347:#define
__NR_userfaultfd (__NR_SYSCALL_BASE + 388)
arch/arm/include/generated/uapi/asm/unistd-oabi.h:359:#define
__NR_userfaultfd (__NR_SYSCALL_BASE + 388)
include/uapi/asm-generic/unistd.h:681:#define __NR_userfaultfd 282
The number is dependent on the architecture. The above data shows that:
x86 374
x86_64 323
The value of __NR_userfaultfd was changed to 282 when asm-generic/unistd.h
was included. It makes the test to fail every time as the correct number
of this syscall on x86_64 is 323. Fix the header to asm/unistd.h.
Link: https://lkml.kernel.org/r/20240923053836.3270393-1-usama.anjum@collabora.com
Fixes: a5c6bc590094 ("selftests/mm: remove local __NR_* definitions")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ac01c8c4246546fd8340a232f3ada1921dc0ee48 upstream.
AddressSanitizer found a use-after-free bug in the symbol code which
manifested as 'perf top' segfaulting.
==1238389==ERROR: AddressSanitizer: heap-use-after-free on address 0x60b00c48844b at pc 0x5650d8035961 bp 0x7f751aaecc90 sp 0x7f751aaecc80
READ of size 1 at 0x60b00c48844b thread T193
#0 0x5650d8035960 in _sort__sym_cmp util/sort.c:310
#1 0x5650d8043744 in hist_entry__cmp util/hist.c:1286
#2 0x5650d8043951 in hists__findnew_entry util/hist.c:614
#3 0x5650d804568f in __hists__add_entry util/hist.c:754
#4 0x5650d8045bf9 in hists__add_entry util/hist.c:772
#5 0x5650d8045df1 in iter_add_single_normal_entry util/hist.c:997
#6 0x5650d8043326 in hist_entry_iter__add util/hist.c:1242
#7 0x5650d7ceeefe in perf_event__process_sample /home/matt/src/linux/tools/perf/builtin-top.c:845
#8 0x5650d7ceeefe in deliver_event /home/matt/src/linux/tools/perf/builtin-top.c:1208
#9 0x5650d7fdb51b in do_flush util/ordered-events.c:245
#10 0x5650d7fdb51b in __ordered_events__flush util/ordered-events.c:324
#11 0x5650d7ced743 in process_thread /home/matt/src/linux/tools/perf/builtin-top.c:1120
#12 0x7f757ef1f133 in start_thread nptl/pthread_create.c:442
#13 0x7f757ef9f7db in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81
When updating hist maps it's also necessary to update the hist symbol
reference because the old one gets freed in map__put().
While this bug was probably introduced with 5c24b67aae72f54c ("perf
tools: Replace map->referenced & maps->removed_maps with map->refcnt"),
the symbol objects were leaked until c087e9480cf33672 ("perf machine:
Fix refcount usage when processing PERF_RECORD_KSYMBOL") was merged so
the bug was masked.
Fixes: c087e9480cf33672 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL")
Reported-by: Yunzhao Li <yunzhao@cloudflare.com>
Signed-off-by: Matt Fleming (Cloudflare) <matt@readmodwrite.com>
Cc: Ian Rogers <irogers@google.com>
Cc: kernel-team@cloudflare.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org # v5.13+
Link: https://lore.kernel.org/r/20240815142212.3834625-1-matt@readmodwrite.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 00dc514612fe98cfa117193b9df28f15e7c9db9c upstream.
The -Wcast-function-type-mismatch option was introduced in clang 19 and
its enabled by default, since we use -Werror, and python bindings do
casts that are valid but trips this warning, disable it if present.
Closes: https://lore.kernel.org/all/CA+icZUXoJ6BS3GMhJHV3aZWyb5Cz2haFneX0C5pUMUUhG-UVKQ@mail.gmail.com
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org # To allow building with the upcoming clang 19
Link: https://lore.kernel.org/lkml/CA+icZUVtHn8X1Tb_Y__c-WswsO0K8U9uy3r2MzKXwTA5THtL7w@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a6e23fb8d3c0e3904da70beaf5d7e840a983c97f ]
Running vdso_test_correctness on s390x (aka s390 64 bit) emits a warning:
Warning: failed to find clock_gettime64 in vDSO
This is caused by the "#elif defined (__s390__)" check in vdso_config.h
which the defines VDSO_32BIT.
If __s390x__ is defined also __s390__ is defined. Therefore the correct
check must make sure that only __s390__ is defined.
Therefore add the missing !defined(__s390x__). Also use common
__s390x__ define instead of __s390X__.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Fixes: 693f5ca08ca0 ("kselftest: Extend vDSO selftest")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 14be4e6f35221c4731b004553ecf7cbc6dc1d2d8 ]
The vDSO self tests fail on s390x for a vDSO linked with the GNU linker
ld as follows:
# ./vdso_test_gettimeofday
Floating point exception (core dumped)
On s390x the ELF hash table entries are 64 bits instead of 32 bits in
size (see Glibc sysdeps/unix/sysv/linux/s390/bits/elfclass.h).
Fixes: 40723419f407 ("kselftest: Enable vDSO test on non x86 platforms")
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c41a701d18efe6b8aa402efab16edbaba50c9548 ]
Currently, running the charge_reserved_hugetlb.sh selftest we can
sometimes observe something like:
$ ./charge_reserved_hugetlb.sh -cgroup-v2
...
write_result is 0
After write:
hugetlb_usage=0
reserved_usage=10485760
killing write_to_hugetlbfs
Received 2.
Deleting the memory
Detach failure: Invalid argument
umount: /mnt/huge: target is busy.
Both cases are issues in the test.
While the unmount error seems to be racy, it will make the test fail:
$ ./run_vmtests.sh -t hugetlb
...
# [FAIL]
not ok 10 charge_reserved_hugetlb.sh -cgroup-v2 # exit=32
The issue is that we are not waiting for the write_to_hugetlbfs process to
quit. So it might still have a hugetlbfs file open, about which umount is
not happy. Fix that by making "killall" wait for the process to quit.
The other error ("Detach failure: Invalid argument") does not seem to
result in a test error, but is misleading. Turns out write_to_hugetlbfs.c
unconditionally tries to cleanup using shmdt(), even when we only
mmap()'ed a hugetlb file. Even worse, shmaddr is never even set for the
SHM case. Fix that as well.
With this change it seems to work as expected.
Link: https://lkml.kernel.org/r/20240821123115.2068812-1-david@redhat.com
Fixes: 29750f71a9b4 ("hugetlb_cgroup: add hugetlb_cgroup reservation tests")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ba83b3239e657469709d15dcea5f9b65bf9dbf34 ]
On powerpc64, following tests fail locating vDSO functions:
~ # ./vdso_test_abi
TAP version 13
1..16
# [vDSO kselftest] VDSO_VERSION: LINUX_2.6.15
# Couldn't find __kernel_gettimeofday
ok 1 # SKIP __kernel_gettimeofday
# clock_id: CLOCK_REALTIME
# Couldn't find __kernel_clock_gettime
ok 2 # SKIP __kernel_clock_gettime CLOCK_REALTIME
# Couldn't find __kernel_clock_getres
ok 3 # SKIP __kernel_clock_getres CLOCK_REALTIME
...
# Couldn't find __kernel_time
ok 16 # SKIP __kernel_time
# Totals: pass:0 fail:0 xfail:0 xpass:0 skip:16 error:0
~ # ./vdso_test_getrandom
__kernel_getrandom is missing!
~ # ./vdso_test_gettimeofday
Could not find __kernel_gettimeofday
~ # ./vdso_test_getcpu
Could not find __kernel_getcpu
On powerpc64, as shown below by readelf, vDSO functions symbols have
type NOTYPE, so also accept that type when looking for symbols.
$ powerpc64-linux-gnu-readelf -a arch/powerpc/kernel/vdso/vdso64.so.dbg
ELF Header:
Magic: 7f 45 4c 46 02 02 01 00 00 00 00 00 00 00 00 00
Class: ELF64
Data: 2's complement, big endian
Version: 1 (current)
OS/ABI: UNIX - System V
ABI Version: 0
Type: DYN (Shared object file)
Machine: PowerPC64
Ve |
