From ccebb88aea1329221e1063906f4846b532a57fb5 Mon Sep 17 00:00:00 2001
From: Maarten ter Huurne <maarten@treewalker.org>
Date: Mon, 31 Oct 2016 15:19:55 +0100
Subject: MIPS: zboot: Add "uzImage.bin" target

uzImage.bin is vmlinuz.bin wrapped in a legacy U-Boot image. Since
the extraction code is inside the image, it does not depend on the
boot loader to extract the kernel.

Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Cc: Alban Bedel <albeu@free.fr>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14473/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Makefile                 | 4 ++++
 arch/mips/boot/compressed/Makefile | 4 ++++
 2 files changed, 8 insertions(+)

diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 1a6bac7b076f..0f6e95cba43c 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -320,6 +320,9 @@ bootz-y			:= vmlinuz
 bootz-y			+= vmlinuz.bin
 bootz-y			+= vmlinuz.ecoff
 bootz-y			+= vmlinuz.srec
+ifeq ($(shell expr $(zload-y) \< 0xffffffff80000000 2> /dev/null), 0)
+bootz-y			+= uzImage.bin
+endif
 
 ifdef CONFIG_LASAT
 rom.bin rom.sw: vmlinux
@@ -433,6 +436,7 @@ define archhelp
 	echo '  uImage.gz            - U-Boot image (gzip)'
 	echo '  uImage.lzma          - U-Boot image (lzma)'
 	echo '  uImage.lzo           - U-Boot image (lzo)'
+	echo '  uzImage.bin          - U-Boot image (self-extracting)'
 	echo '  dtbs                 - Device-tree blobs for enabled boards'
 	echo '  dtbs_install         - Install dtbs to $(INSTALL_DTBS_PATH)'
 	echo
diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index 90aca95fe314..011b14512c05 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -84,6 +84,7 @@ else
 VMLINUZ_LOAD_ADDRESS = $(shell $(obj)/calc_vmlinuz_load_addr \
 		$(obj)/vmlinux.bin $(VMLINUX_LOAD_ADDRESS))
 endif
+UIMAGE_LOADADDR = $(VMLINUZ_LOAD_ADDRESS)
 
 vmlinuzobjs-y += $(obj)/piggy.o
 
@@ -129,4 +130,7 @@ OBJCOPYFLAGS_vmlinuz.srec := $(OBJCOPYFLAGS) -S -O srec
 vmlinuz.srec: vmlinuz
 	$(call cmd,objcopy)
 
+uzImage.bin: vmlinuz.bin FORCE
+	$(call if_changed,uimage,none)
+
 clean-files := $(objtree)/vmlinuz $(objtree)/vmlinuz.{32,ecoff,bin,srec}
-- 
cgit v1.2.3


From 3c2b02397893c40ce46e2297ba980fbc40d908b0 Mon Sep 17 00:00:00 2001
From: Julia Lawall <Julia.Lawall@lip6.fr>
Date: Sat, 29 Oct 2016 21:36:59 +0200
Subject: MIPS: TXx9: 7segled: use permission-specific DEVICE_ATTR variants

Use DEVICE_ATTR_WO for write only attributes.  This simplifies the
source code, improves readbility, and reduces the chance of
inconsistencies.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@wo@
declarer name DEVICE_ATTR;
identifier x,x_store;
@@

DEVICE_ATTR(x, \(0200\|S_IWUSR\), NULL, x_store);

@script:ocaml@
x << wo.x;
x_store << wo.x_store;
@@

if not (x^"_store" = x_store) then Coccilib.include_match false

@@
declarer name DEVICE_ATTR_WO;
identifier wo.x,wo.x_store;
@@

- DEVICE_ATTR(x, \(0200\|S_IWUSR\), NULL, x_store);
+ DEVICE_ATTR_WO(x);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: kernel-janitors@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14463/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/txx9/generic/7segled.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/txx9/generic/7segled.c b/arch/mips/txx9/generic/7segled.c
index 566c58bd44d0..2203c2548cb4 100644
--- a/arch/mips/txx9/generic/7segled.c
+++ b/arch/mips/txx9/generic/7segled.c
@@ -55,8 +55,8 @@ static ssize_t raw_store(struct device *dev,
 	return size;
 }
 
-static DEVICE_ATTR(ascii, 0200, NULL, ascii_store);
-static DEVICE_ATTR(raw, 0200, NULL, raw_store);
+static DEVICE_ATTR_WO(ascii);
+static DEVICE_ATTR_WO(raw);
 
 static ssize_t map_seg7_show(struct device *dev,
 			     struct device_attribute *attr,
-- 
cgit v1.2.3


From 2b58a76e2fd6c8064c5049c4dda1f4c329a33478 Mon Sep 17 00:00:00 2001
From: Aaro Koskinen <aaro.koskinen@iki.fi>
Date: Sun, 27 Nov 2016 02:30:51 +0200
Subject: MIPS: Octeon: Kill cvmx_helper_link_autoconf()

Kill cvmx_helper_link_autoconf(). Nobody uses this function.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14626/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 .../cavium-octeon/executive/cvmx-helper-rgmii.c    |  3 +-
 .../cavium-octeon/executive/cvmx-helper-sgmii.c    |  3 +-
 .../mips/cavium-octeon/executive/cvmx-helper-spi.c |  3 +-
 .../cavium-octeon/executive/cvmx-helper-xaui.c     |  3 +-
 arch/mips/cavium-octeon/executive/cvmx-helper.c    | 47 +---------------------
 arch/mips/include/asm/octeon/cvmx-helper-rgmii.h   |  3 +-
 arch/mips/include/asm/octeon/cvmx-helper-sgmii.h   |  3 +-
 arch/mips/include/asm/octeon/cvmx-helper-spi.h     |  3 +-
 arch/mips/include/asm/octeon/cvmx-helper-xaui.h    |  3 +-
 arch/mips/include/asm/octeon/cvmx-helper.h         | 14 +------
 10 files changed, 10 insertions(+), 75 deletions(-)

diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
index 671ab1db2727..ba4753c23b03 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
@@ -287,8 +287,7 @@ cvmx_helper_link_info_t __cvmx_helper_rgmii_link_get(int ipd_port)
  * Configure an IPD/PKO port for the specified link state. This
  * function does not influence auto negotiation at the PHY level.
  * The passed link state must always match the link state returned
- * by cvmx_helper_link_get(). It is normally best to use
- * cvmx_helper_link_autoconf() instead.
+ * by cvmx_helper_link_get().
  *
  * @ipd_port:  IPD/PKO port to configure
  * @link_info: The new link state
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
index 54375340afe8..578283350776 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
@@ -500,8 +500,7 @@ cvmx_helper_link_info_t __cvmx_helper_sgmii_link_get(int ipd_port)
  * Configure an IPD/PKO port for the specified link state. This
  * function does not influence auto negotiation at the PHY level.
  * The passed link state must always match the link state returned
- * by cvmx_helper_link_get(). It is normally best to use
- * cvmx_helper_link_autoconf() instead.
+ * by cvmx_helper_link_get().
  *
  * @ipd_port:  IPD/PKO port to configure
  * @link_info: The new link state
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c
index 1f3030c72d88..ef16aa00167b 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c
@@ -188,8 +188,7 @@ cvmx_helper_link_info_t __cvmx_helper_spi_link_get(int ipd_port)
  * Configure an IPD/PKO port for the specified link state. This
  * function does not influence auto negotiation at the PHY level.
  * The passed link state must always match the link state returned
- * by cvmx_helper_link_get(). It is normally best to use
- * cvmx_helper_link_autoconf() instead.
+ * by cvmx_helper_link_get().
  *
  * @ipd_port:  IPD/PKO port to configure
  * @link_info: The new link state
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c
index d347fe13b666..19d54e02c185 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c
@@ -295,8 +295,7 @@ cvmx_helper_link_info_t __cvmx_helper_xaui_link_get(int ipd_port)
  * Configure an IPD/PKO port for the specified link state. This
  * function does not influence auto negotiation at the PHY level.
  * The passed link state must always match the link state returned
- * by cvmx_helper_link_get(). It is normally best to use
- * cvmx_helper_link_autoconf() instead.
+ * by cvmx_helper_link_get().
  *
  * @ipd_port:  IPD/PKO port to configure
  * @link_info: The new link state
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper.c b/arch/mips/cavium-octeon/executive/cvmx-helper.c
index 6456af642471..f24be0b5db50 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c
@@ -69,10 +69,6 @@ void (*cvmx_override_ipd_port_setup) (int ipd_port);
 /* Port count per interface */
 static int interface_port_count[5];
 
-/* Port last configured link info index by IPD/PKO port */
-static cvmx_helper_link_info_t
-    port_link_info[CVMX_PIP_NUM_INPUT_PORTS];
-
 /**
  * Return the number of interfaces the chip has. Each interface
  * may have multiple ports. Most chips support two interfaces,
@@ -1135,41 +1131,6 @@ int cvmx_helper_initialize_packet_io_local(void)
 	return cvmx_pko_initialize_local();
 }
 
-/**
- * Auto configure an IPD/PKO port link state and speed. This
- * function basically does the equivalent of:
- * cvmx_helper_link_set(ipd_port, cvmx_helper_link_get(ipd_port));
- *
- * @ipd_port: IPD/PKO port to auto configure
- *
- * Returns Link state after configure
- */
-cvmx_helper_link_info_t cvmx_helper_link_autoconf(int ipd_port)
-{
-	cvmx_helper_link_info_t link_info;
-	int interface = cvmx_helper_get_interface_num(ipd_port);
-	int index = cvmx_helper_get_interface_index_num(ipd_port);
-
-	if (index >= cvmx_helper_ports_on_interface(interface)) {
-		link_info.u64 = 0;
-		return link_info;
-	}
-
-	link_info = cvmx_helper_link_get(ipd_port);
-	if (link_info.u64 == port_link_info[ipd_port].u64)
-		return link_info;
-
-	/* If we fail to set the link speed, port_link_info will not change */
-	cvmx_helper_link_set(ipd_port, link_info);
-
-	/*
-	 * port_link_info should be the current value, which will be
-	 * different than expect if cvmx_helper_link_set() failed.
-	 */
-	return port_link_info[ipd_port];
-}
-EXPORT_SYMBOL_GPL(cvmx_helper_link_autoconf);
-
 /**
  * Return the link state of an IPD/PKO port as returned by
  * auto negotiation. The result of this function may not match
@@ -1233,8 +1194,7 @@ EXPORT_SYMBOL_GPL(cvmx_helper_link_get);
  * Configure an IPD/PKO port for the specified link state. This
  * function does not influence auto negotiation at the PHY level.
  * The passed link state must always match the link state returned
- * by cvmx_helper_link_get(). It is normally best to use
- * cvmx_helper_link_autoconf() instead.
+ * by cvmx_helper_link_get().
  *
  * @ipd_port:  IPD/PKO port to configure
  * @link_info: The new link state
@@ -1276,11 +1236,6 @@ int cvmx_helper_link_set(int ipd_port, cvmx_helper_link_info_t link_info)
 	case CVMX_HELPER_INTERFACE_MODE_LOOP:
 		break;
 	}
-	/* Set the port_link_info here so that the link status is updated
-	   no matter how cvmx_helper_link_set is called. We don't change
-	   the value if link_set failed */
-	if (result == 0)
-		port_link_info[ipd_port].u64 = link_info.u64;
 	return result;
 }
 EXPORT_SYMBOL_GPL(cvmx_helper_link_set);
diff --git a/arch/mips/include/asm/octeon/cvmx-helper-rgmii.h b/arch/mips/include/asm/octeon/cvmx-helper-rgmii.h
index 4d7a3db3a9f6..f89775be7654 100644
--- a/arch/mips/include/asm/octeon/cvmx-helper-rgmii.h
+++ b/arch/mips/include/asm/octeon/cvmx-helper-rgmii.h
@@ -80,8 +80,7 @@ extern cvmx_helper_link_info_t __cvmx_helper_rgmii_link_get(int ipd_port);
  * Configure an IPD/PKO port for the specified link state. This
  * function does not influence auto negotiation at the PHY level.
  * The passed link state must always match the link state returned
- * by cvmx_helper_link_get(). It is normally best to use
- * cvmx_helper_link_autoconf() instead.
+ * by cvmx_helper_link_get().
  *
  * @ipd_port:  IPD/PKO port to configure
  * @link_info: The new link state
diff --git a/arch/mips/include/asm/octeon/cvmx-helper-sgmii.h b/arch/mips/include/asm/octeon/cvmx-helper-sgmii.h
index 4debb1c5153d..63fd21335e4b 100644
--- a/arch/mips/include/asm/octeon/cvmx-helper-sgmii.h
+++ b/arch/mips/include/asm/octeon/cvmx-helper-sgmii.h
@@ -74,8 +74,7 @@ extern cvmx_helper_link_info_t __cvmx_helper_sgmii_link_get(int ipd_port);
  * Configure an IPD/PKO port for the specified link state. This
  * function does not influence auto negotiation at the PHY level.
  * The passed link state must always match the link state returned
- * by cvmx_helper_link_get(). It is normally best to use
- * cvmx_helper_link_autoconf() instead.
+ * by cvmx_helper_link_get().
  *
  * @ipd_port:  IPD/PKO port to configure
  * @link_info: The new link state
diff --git a/arch/mips/include/asm/octeon/cvmx-helper-spi.h b/arch/mips/include/asm/octeon/cvmx-helper-spi.h
index 9f1c6b968f91..d5adf8592773 100644
--- a/arch/mips/include/asm/octeon/cvmx-helper-spi.h
+++ b/arch/mips/include/asm/octeon/cvmx-helper-spi.h
@@ -71,8 +71,7 @@ extern cvmx_helper_link_info_t __cvmx_helper_spi_link_get(int ipd_port);
  * Configure an IPD/PKO port for the specified link state. This
  * function does not influence auto negotiation at the PHY level.
  * The passed link state must always match the link state returned
- * by cvmx_helper_link_get(). It is normally best to use
- * cvmx_helper_link_autoconf() instead.
+ * by cvmx_helper_link_get().
  *
  * @ipd_port:  IPD/PKO port to configure
  * @link_info: The new link state
diff --git a/arch/mips/include/asm/octeon/cvmx-helper-xaui.h b/arch/mips/include/asm/octeon/cvmx-helper-xaui.h
index 5e89ed703eaa..f8ce53f6f28f 100644
--- a/arch/mips/include/asm/octeon/cvmx-helper-xaui.h
+++ b/arch/mips/include/asm/octeon/cvmx-helper-xaui.h
@@ -74,8 +74,7 @@ extern cvmx_helper_link_info_t __cvmx_helper_xaui_link_get(int ipd_port);
  * Configure an IPD/PKO port for the specified link state. This
  * function does not influence auto negotiation at the PHY level.
  * The passed link state must always match the link state returned
- * by cvmx_helper_link_get(). It is normally best to use
- * cvmx_helper_link_autoconf() instead.
+ * by cvmx_helper_link_get().
  *
  * @ipd_port:  IPD/PKO port to configure
  * @link_info: The new link state
diff --git a/arch/mips/include/asm/octeon/cvmx-helper.h b/arch/mips/include/asm/octeon/cvmx-helper.h
index 5a3090dc6f2f..0ed87cb67e7f 100644
--- a/arch/mips/include/asm/octeon/cvmx-helper.h
+++ b/arch/mips/include/asm/octeon/cvmx-helper.h
@@ -155,17 +155,6 @@ extern int cvmx_helper_get_number_of_interfaces(void);
 extern cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int
 								   interface);
 
-/**
- * Auto configure an IPD/PKO port link state and speed. This
- * function basically does the equivalent of:
- * cvmx_helper_link_set(ipd_port, cvmx_helper_link_get(ipd_port));
- *
- * @ipd_port: IPD/PKO port to auto configure
- *
- * Returns Link state after configure
- */
-extern cvmx_helper_link_info_t cvmx_helper_link_autoconf(int ipd_port);
-
 /**
  * Return the link state of an IPD/PKO port as returned by
  * auto negotiation. The result of this function may not match
@@ -182,8 +171,7 @@ extern cvmx_helper_link_info_t cvmx_helper_link_get(int ipd_port);
  * Configure an IPD/PKO port for the specified link state. This
  * function does not influence auto negotiation at the PHY level.
  * The passed link state must always match the link state returned
- * by cvmx_helper_link_get(). It is normally best to use
- * cvmx_helper_link_autoconf() instead.
+ * by cvmx_helper_link_get().
  *
  * @ipd_port:  IPD/PKO port to configure
  * @link_info: The new link state
-- 
cgit v1.2.3


From 2cec11d871814cd65702ccd3591232ee9f185360 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Wed, 7 Dec 2016 10:05:15 +0100
Subject: MIPS: TXx9: Modernize printing of kernel messages

- Convert from printk() to pr_*(),
  - Add missing continuations, to fix user-visible breakage,
  - Drop superfluous casts (u64 has been unsigned long long on all
    architectures for many years).

On rbtx4927, this restores the kernel output like:

    -TX4927 SDRAMC --
    - CR0:0000007e00000544
    - TR:32800030e
    +TX4927 SDRAMC -- CR0:0000007e00000544 TR:32800030e

and:

    -PCIC -- PCICLK:
    -Internal(33.3MHz)
    -
    +PCIC -- PCICLK:Internal(33.3MHz)

Fixes: 4bcc595ccd80decb ("printk: reinstate KERN_CONT for printing continuation lines")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14646/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/pci/pci-tx4927.c              | 22 +++++++++++-----------
 arch/mips/pci/pci-tx4938.c              | 30 +++++++++++++++---------------
 arch/mips/pci/pci-tx4939.c              | 10 +++++-----
 arch/mips/txx9/generic/pci.c            | 28 +++++++++++++---------------
 arch/mips/txx9/generic/setup_tx3927.c   |  6 +++---
 arch/mips/txx9/generic/setup_tx4927.c   | 20 +++++++++-----------
 arch/mips/txx9/generic/setup_tx4938.c   | 28 +++++++++++++---------------
 arch/mips/txx9/generic/setup_tx4939.c   |  8 ++++----
 arch/mips/txx9/generic/smsc_fdc37m81x.c | 17 +++++++----------
 arch/mips/txx9/jmr3927/prom.c           |  2 +-
 arch/mips/txx9/jmr3927/setup.c          | 11 +++++------
 arch/mips/txx9/rbtx4938/setup.c         | 14 +++++++-------
 12 files changed, 93 insertions(+), 103 deletions(-)

diff --git a/arch/mips/pci/pci-tx4927.c b/arch/mips/pci/pci-tx4927.c
index a032ae0a533d..9b3301d19a63 100644
--- a/arch/mips/pci/pci-tx4927.c
+++ b/arch/mips/pci/pci-tx4927.c
@@ -21,9 +21,9 @@ int __init tx4927_report_pciclk(void)
 {
 	int pciclk = 0;
 
-	printk(KERN_INFO "PCIC --%s PCICLK:",
-	       (__raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCI66) ?
-	       " PCI66" : "");
+	pr_info("PCIC --%s PCICLK:",
+		(__raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCI66) ?
+		" PCI66" : "");
 	if (__raw_readq(&tx4927_ccfgptr->pcfg) & TX4927_PCFG_PCICLKEN_ALL) {
 		u64 ccfg = __raw_readq(&tx4927_ccfgptr->ccfg);
 		switch ((unsigned long)ccfg &
@@ -37,14 +37,14 @@ int __init tx4927_report_pciclk(void)
 		case TX4927_CCFG_PCIDIVMODE_6:
 			pciclk = txx9_cpu_clock / 6; break;
 		}
-		printk("Internal(%u.%uMHz)",
-		       (pciclk + 50000) / 1000000,
-		       ((pciclk + 50000) / 100000) % 10);
+		pr_cont("Internal(%u.%uMHz)",
+			(pciclk + 50000) / 1000000,
+			((pciclk + 50000) / 100000) % 10);
 	} else {
-		printk("External");
+		pr_cont("External");
 		pciclk = -1;
 	}
-	printk("\n");
+	pr_cont("\n");
 	return pciclk;
 }
 
@@ -74,8 +74,8 @@ int __init tx4927_pciclk66_setup(void)
 		}
 		tx4927_ccfg_change(TX4927_CCFG_PCIDIVMODE_MASK,
 				   pcidivmode);
-		printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n",
-		       (unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg));
+		pr_debug("PCICLK: ccfg:%08lx\n",
+			 (unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg));
 	} else
 		pciclk = -1;
 	return pciclk;
@@ -87,5 +87,5 @@ void __init tx4927_setup_pcierr_irq(void)
 			tx4927_pcierr_interrupt,
 			0, "PCI error",
 			(void *)TX4927_PCIC_REG))
-		printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+		pr_warn("Failed to request irq for PCIERR\n");
 }
diff --git a/arch/mips/pci/pci-tx4938.c b/arch/mips/pci/pci-tx4938.c
index 141bba562488..000c0e1f9ef8 100644
--- a/arch/mips/pci/pci-tx4938.c
+++ b/arch/mips/pci/pci-tx4938.c
@@ -21,9 +21,9 @@ int __init tx4938_report_pciclk(void)
 {
 	int pciclk = 0;
 
-	printk(KERN_INFO "PCIC --%s PCICLK:",
-	       (__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCI66) ?
-	       " PCI66" : "");
+	pr_info("PCIC --%s PCICLK:",
+		(__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCI66) ?
+		" PCI66" : "");
 	if (__raw_readq(&tx4938_ccfgptr->pcfg) & TX4938_PCFG_PCICLKEN_ALL) {
 		u64 ccfg = __raw_readq(&tx4938_ccfgptr->ccfg);
 		switch ((unsigned long)ccfg &
@@ -45,14 +45,14 @@ int __init tx4938_report_pciclk(void)
 		case TX4938_CCFG_PCIDIVMODE_11:
 			pciclk = txx9_cpu_clock / 11; break;
 		}
-		printk("Internal(%u.%uMHz)",
-		       (pciclk + 50000) / 1000000,
-		       ((pciclk + 50000) / 100000) % 10);
+		pr_cont("Internal(%u.%uMHz)",
+			(pciclk + 50000) / 1000000,
+			((pciclk + 50000) / 100000) % 10);
 	} else {
-		printk("External");
+		pr_cont("External");
 		pciclk = -1;
 	}
-	printk("\n");
+	pr_cont("\n");
 	return pciclk;
 }
 
@@ -62,10 +62,10 @@ void __init tx4938_report_pci1clk(void)
 	unsigned int pciclk =
 		txx9_gbus_clock / ((ccfg & TX4938_CCFG_PCI1DMD) ? 4 : 2);
 
-	printk(KERN_INFO "PCIC1 -- %sPCICLK:%u.%uMHz\n",
-	       (ccfg & TX4938_CCFG_PCI1_66) ? "PCI66 " : "",
-	       (pciclk + 50000) / 1000000,
-	       ((pciclk + 50000) / 100000) % 10);
+	pr_info("PCIC1 -- %sPCICLK:%u.%uMHz\n",
+		(ccfg & TX4938_CCFG_PCI1_66) ? "PCI66 " : "",
+		(pciclk + 50000) / 1000000,
+		((pciclk + 50000) / 100000) % 10);
 }
 
 int __init tx4938_pciclk66_setup(void)
@@ -105,8 +105,8 @@ int __init tx4938_pciclk66_setup(void)
 		}
 		tx4938_ccfg_change(TX4938_CCFG_PCIDIVMODE_MASK,
 				   pcidivmode);
-		printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n",
-		       (unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg));
+		pr_debug("PCICLK: ccfg:%08lx\n",
+			 (unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg));
 	} else
 		pciclk = -1;
 	return pciclk;
@@ -138,5 +138,5 @@ void __init tx4938_setup_pcierr_irq(void)
 			tx4927_pcierr_interrupt,
 			0, "PCI error",
 			(void *)TX4927_PCIC_REG))
-		printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+		pr_warn("Failed to request irq for PCIERR\n");
 }
diff --git a/arch/mips/pci/pci-tx4939.c b/arch/mips/pci/pci-tx4939.c
index cd8ed09c4f53..9d6acc00f348 100644
--- a/arch/mips/pci/pci-tx4939.c
+++ b/arch/mips/pci/pci-tx4939.c
@@ -28,14 +28,14 @@ int __init tx4939_report_pciclk(void)
 		pciclk = txx9_master_clock * 20 / 6;
 		if (!(__raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_PCI66))
 			pciclk /= 2;
-		printk(KERN_CONT "Internal(%u.%uMHz)",
-		       (pciclk + 50000) / 1000000,
-		       ((pciclk + 50000) / 100000) % 10);
+		pr_cont("Internal(%u.%uMHz)",
+			(pciclk + 50000) / 1000000,
+			((pciclk + 50000) / 100000) % 10);
 	} else {
-		printk(KERN_CONT "External");
+		pr_cont("External");
 		pciclk = -1;
 	}
-	printk(KERN_CONT "\n");
+	pr_cont("\n");
 	return pciclk;
 }
 
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
index 285d84e5c7b9..0bd2a1e1ff9a 100644
--- a/arch/mips/txx9/generic/pci.c
+++ b/arch/mips/txx9/generic/pci.c
@@ -55,7 +55,7 @@ int __init txx9_pci66_check(struct pci_controller *hose, int top_bus,
 	/* It seems SLC90E66 needs some time after PCI reset... */
 	mdelay(80);
 
-	printk(KERN_INFO "PCI: Checking 66MHz capabilities...\n");
+	pr_info("PCI: Checking 66MHz capabilities...\n");
 
 	for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
 		if (PCI_FUNC(pci_devfn))
@@ -74,9 +74,8 @@ int __init txx9_pci66_check(struct pci_controller *hose, int top_bus,
 			early_read_config_word(hose, top_bus, current_bus,
 					       pci_devfn, PCI_STATUS, &stat);
 			if (!(stat & PCI_STATUS_66MHZ)) {
-				printk(KERN_DEBUG
-				       "PCI: %02x:%02x not 66MHz capable.\n",
-				       current_bus, pci_devfn);
+				pr_debug("PCI: %02x:%02x not 66MHz capable.\n",
+					 current_bus, pci_devfn);
 				cap66 = 0;
 				break;
 			}
@@ -209,8 +208,8 @@ txx9_alloc_pci_controller(struct pci_controller *pcic,
 
 	pcic->mem_offset = 0;	/* busaddr == physaddr */
 
-	printk(KERN_INFO "PCI: IO %pR MEM %pR\n",
-	       &pcic->mem_resource[1], &pcic->mem_resource[0]);
+	pr_info("PCI: IO %pR MEM %pR\n", &pcic->mem_resource[1],
+		&pcic->mem_resource[0]);
 
 	/* register_pci_controller() will request MEM resource */
 	release_resource(&pcic->mem_resource[0]);
@@ -219,7 +218,7 @@ txx9_alloc_pci_controller(struct pci_controller *pcic,
 	release_resource(&pcic->mem_resource[0]);
  free_and_exit:
 	kfree(new);
-	printk(KERN_ERR "PCI: Failed to allocate resources.\n");
+	pr_err("PCI: Failed to allocate resources.\n");
 	return NULL;
 }
 
@@ -260,7 +259,7 @@ static int txx9_i8259_irq_setup(int irq)
 	err = request_irq(irq, &i8259_interrupt, IRQF_SHARED,
 			  "cascade(i8259)", (void *)(long)irq);
 	if (!err)
-		printk(KERN_INFO "PCI-ISA bridge PIC (irq %d)\n", irq);
+		pr_info("PCI-ISA bridge PIC (irq %d)\n", irq);
 	return err;
 }
 
@@ -308,13 +307,13 @@ static void quirk_slc90e66_ide(struct pci_dev *dev)
 	/* SMSC SLC90E66 IDE uses irq 14, 15 (default) */
 	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 14);
 	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &dat);
-	printk(KERN_INFO "PCI: %s: IRQ %02x", pci_name(dev), dat);
+	pr_info("PCI: %s: IRQ %02x", pci_name(dev), dat);
 	/* enable SMSC SLC90E66 IDE */
 	for (i = 0; i < ARRAY_SIZE(regs); i++) {
 		pci_read_config_byte(dev, regs[i], &dat);
 		pci_write_config_byte(dev, regs[i], dat | 0x80);
 		pci_read_config_byte(dev, regs[i], &dat);
-		printk(KERN_CONT " IDETIM%d %02x", i, dat);
+		pr_cont(" IDETIM%d %02x", i, dat);
 	}
 	pci_read_config_byte(dev, 0x5c, &dat);
 	/*
@@ -329,8 +328,7 @@ static void quirk_slc90e66_ide(struct pci_dev *dev)
 	dat |= 0x01;
 	pci_write_config_byte(dev, 0x5c, dat);
 	pci_read_config_byte(dev, 0x5c, &dat);
-	printk(KERN_CONT " REG5C %02x", dat);
-	printk(KERN_CONT "\n");
+	pr_cont(" REG5C %02x\n", dat);
 }
 #endif /* CONFIG_TOSHIBA_FPCIB0 */
 
@@ -352,7 +350,7 @@ static void final_fixup(struct pci_dev *dev)
 	    (bist & PCI_BIST_CAPABLE)) {
 		unsigned long timeout;
 		pci_set_power_state(dev, PCI_D0);
-		printk(KERN_INFO "PCI: %s BIST...", pci_name(dev));
+		pr_info("PCI: %s BIST...", pci_name(dev));
 		pci_write_config_byte(dev, PCI_BIST, PCI_BIST_START);
 		timeout = jiffies + HZ * 2;	/* timeout after 2 sec */
 		do {
@@ -361,9 +359,9 @@ static void final_fixup(struct pci_dev *dev)
 				break;
 		} while (bist & PCI_BIST_START);
 		if (bist & (PCI_BIST_CODE_MASK | PCI_BIST_START))
-			printk(KERN_CONT "failed. (0x%x)\n", bist);
+			pr_cont("failed. (0x%x)\n", bist);
 		else
-			printk(KERN_CONT "OK.\n");
+			pr_cont("OK.\n");
 	}
 }
 
diff --git a/arch/mips/txx9/generic/setup_tx3927.c b/arch/mips/txx9/generic/setup_tx3927.c
index d3b83a92cf26..33f7a7253963 100644
--- a/arch/mips/txx9/generic/setup_tx3927.c
+++ b/arch/mips/txx9/generic/setup_tx3927.c
@@ -67,9 +67,9 @@ void __init tx3927_setup(void)
 	/* do reset on watchdog */
 	tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR;
 
-	printk(KERN_INFO "TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n",
-	       tx3927_ccfgptr->crir,
-	       tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
+	pr_info("TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n",
+		tx3927_ccfgptr->crir, tx3927_ccfgptr->ccfg,
+		tx3927_ccfgptr->pcfg);
 
 	/* TMR */
 	for (i = 0; i < TX3927_NR_TMR; i++)
diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c
index 8d8011570b1d..46e9c4101386 100644
--- a/arch/mips/txx9/generic/setup_tx4927.c
+++ b/arch/mips/txx9/generic/setup_tx4927.c
@@ -183,15 +183,14 @@ void __init tx4927_setup(void)
 	if (!(____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCIARB))
 		txx9_clear64(&tx4927_ccfgptr->pcfg, TX4927_PCFG_PCICLKEN_ALL);
 
-	printk(KERN_INFO "%s -- %dMHz(M%dMHz) CRIR:%08x CCFG:%llx PCFG:%llx\n",
-	       txx9_pcode_str,
-	       (cpuclk + 500000) / 1000000,
-	       (txx9_master_clock + 500000) / 1000000,
-	       (__u32)____raw_readq(&tx4927_ccfgptr->crir),
-	       (unsigned long long)____raw_readq(&tx4927_ccfgptr->ccfg),
-	       (unsigned long long)____raw_readq(&tx4927_ccfgptr->pcfg));
+	pr_info("%s -- %dMHz(M%dMHz) CRIR:%08x CCFG:%llx PCFG:%llx\n",
+		txx9_pcode_str, (cpuclk + 500000) / 1000000,
+		(txx9_master_clock + 500000) / 1000000,
+		(__u32)____raw_readq(&tx4927_ccfgptr->crir),
+		____raw_readq(&tx4927_ccfgptr->ccfg),
+		____raw_readq(&tx4927_ccfgptr->pcfg));
 
-	printk(KERN_INFO "%s SDRAMC --", txx9_pcode_str);
+	pr_info("%s SDRAMC --", txx9_pcode_str);
 	for (i = 0; i < 4; i++) {
 		__u64 cr = TX4927_SDRAMC_CR(i);
 		unsigned long base, size;
@@ -199,15 +198,14 @@ void __init tx4927_setup(void)
 			continue;	/* disabled */
 		base = (unsigned long)(cr >> 49) << 21;
 		size = (((unsigned long)(cr >> 33) & 0x7fff) + 1) << 21;
-		printk(" CR%d:%016llx", i, (unsigned long long)cr);
+		pr_cont(" CR%d:%016llx", i, cr);
 		tx4927_sdram_resource[i].name = "SDRAM";
 		tx4927_sdram_resource[i].start = base;
 		tx4927_sdram_resource[i].end = base + size - 1;
 		tx4927_sdram_resource[i].flags = IORESOURCE_MEM;
 		request_resource(&iomem_resource, &tx4927_sdram_resource[i]);
 	}
-	printk(" TR:%09llx\n",
-	       (unsigned long long)____raw_readq(&tx4927_sdramcptr->tr));
+	pr_cont(" TR:%09llx\n", ____raw_readq(&tx4927_sdramcptr->tr));
 
 	/* TMR */
 	/* disable all timers */
diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c
index ba265bf1fd06..85d1795652da 100644
--- a/arch/mips/txx9/generic/setup_tx4938.c
+++ b/arch/mips/txx9/generic/setup_tx4938.c
@@ -196,15 +196,14 @@ void __init tx4938_setup(void)
 	if (!(____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB))
 		txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_PCICLKEN_ALL);
 
-	printk(KERN_INFO "%s -- %dMHz(M%dMHz) CRIR:%08x CCFG:%llx PCFG:%llx\n",
-	       txx9_pcode_str,
-	       (cpuclk + 500000) / 1000000,
-	       (txx9_master_clock + 500000) / 1000000,
-	       (__u32)____raw_readq(&tx4938_ccfgptr->crir),
-	       (unsigned long long)____raw_readq(&tx4938_ccfgptr->ccfg),
-	       (unsigned long long)____raw_readq(&tx4938_ccfgptr->pcfg));
-
-	printk(KERN_INFO "%s SDRAMC --", txx9_pcode_str);
+	pr_info("%s -- %dMHz(M%dMHz) CRIR:%08x CCFG:%llx PCFG:%llx\n",
+		txx9_pcode_str, (cpuclk + 500000) / 1000000,
+		(txx9_master_clock + 500000) / 1000000,
+		(__u32)____raw_readq(&tx4938_ccfgptr->crir),
+		____raw_readq(&tx4938_ccfgptr->ccfg),
+		____raw_readq(&tx4938_ccfgptr->pcfg));
+
+	pr_info("%s SDRAMC --", txx9_pcode_str);
 	for (i = 0; i < 4; i++) {
 		__u64 cr = TX4938_SDRAMC_CR(i);
 		unsigned long base, size;
@@ -212,15 +211,14 @@ void __init tx4938_setup(void)
 			continue;	/* disabled */
 		base = (unsigned long)(cr >> 49) << 21;
 		size = (((unsigned long)(cr >> 33) & 0x7fff) + 1) << 21;
-		printk(" CR%d:%016llx", i, (unsigned long long)cr);
+		pr_cont(" CR%d:%016llx", i, cr);
 		tx4938_sdram_resource[i].name = "SDRAM";
 		tx4938_sdram_resource[i].start = base;
 		tx4938_sdram_resource[i].end = base + size - 1;
 		tx4938_sdram_resource[i].flags = IORESOURCE_MEM;
 		request_resource(&iomem_resource, &tx4938_sdram_resource[i]);
 	}
-	printk(" TR:%09llx\n",
-	       (unsigned long long)____raw_readq(&tx4938_sdramcptr->tr));
+	pr_cont(" TR:%09llx\n", ____raw_readq(&tx4938_sdramcptr->tr));
 
 	/* SRAM */
 	if (txx9_pcode == 0x4938 && ____raw_readq(&tx4938_sramcptr->cr) & 1) {
@@ -254,20 +252,20 @@ void __init tx4938_setup(void)
 			txx9_clear64(&tx4938_ccfgptr->clkctr,
 				     TX4938_CLKCTR_PCIC1RST);
 		} else {
-			printk(KERN_INFO "%s: stop PCIC1\n", txx9_pcode_str);
+			pr_info("%s: stop PCIC1\n", txx9_pcode_str);
 			/* stop PCIC1 */
 			txx9_set64(&tx4938_ccfgptr->clkctr,
 				   TX4938_CLKCTR_PCIC1CKD);
 		}
 		if (!(pcfg & TX4938_PCFG_ETH0_SEL)) {
-			printk(KERN_INFO "%s: stop ETH0\n", txx9_pcode_str);
+			pr_info("%s: stop ETH0\n", txx9_pcode_str);
 			txx9_set64(&tx4938_ccfgptr->clkctr,
 				   TX4938_CLKCTR_ETH0RST);
 			txx9_set64(&tx4938_ccfgptr->clkctr,
 				   TX4938_CLKCTR_ETH0CKD);
 		}
 		if (!(pcfg & TX4938_PCFG_ETH1_SEL)) {
-			printk(KERN_INFO "%s: stop ETH1\n", txx9_pcode_str);
+			pr_info("%s: stop ETH1\n", txx9_pcode_str);
 			txx9_set64(&tx4938_ccfgptr->clkctr,
 				   TX4938_CLKCTR_ETH1RST);
 			txx9_set64(&tx4938_ccfgptr->clkctr,
diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c
index 402ac2ec7e83..274928987a21 100644
--- a/arch/mips/txx9/generic/setup_tx4939.c
+++ b/arch/mips/txx9/generic/setup_tx4939.c
@@ -221,8 +221,8 @@ void __init tx4939_setup(void)
 		(txx9_master_clock + 500000) / 1000000,
 		(txx9_gbus_clock + 500000) / 1000000,
 		(__u32)____raw_readq(&tx4939_ccfgptr->crir),
-		(unsigned long long)____raw_readq(&tx4939_ccfgptr->ccfg),
-		(unsigned long long)____raw_readq(&tx4939_ccfgptr->pcfg));
+		____raw_readq(&tx4939_ccfgptr->ccfg),
+		____raw_readq(&tx4939_ccfgptr->pcfg));
 
 	pr_info("%s DDRC -- EN:%08x", txx9_pcode_str,
 		(__u32)____raw_readq(&tx4939_ddrcptr->winen));
@@ -230,7 +230,7 @@ void __init tx4939_setup(void)
 		__u64 win = ____raw_readq(&tx4939_ddrcptr->win[i]);
 		if (!((__u32)____raw_readq(&tx4939_ddrcptr->winen) & (1 << i)))
 			continue;	/* disabled */
-		printk(KERN_CONT " #%d:%016llx", i, (unsigned long long)win);
+		pr_cont(" #%d:%016llx", i, win);
 		tx4939_sdram_resource[i].name = "DDR SDRAM";
 		tx4939_sdram_resource[i].start =
 			(unsigned long)(win >> 48) << 20;
@@ -240,7 +240,7 @@ void __init tx4939_setup(void)
 		tx4939_sdram_resource[i].flags = IORESOURCE_MEM;
 		request_resource(&iomem_resource, &tx4939_sdram_resource[i]);
 	}
-	printk(KERN_CONT "\n");
+	pr_cont("\n");
 
 	/* SRAM */
 	if (____raw_readq(&tx4939_sramcptr->cr) & 1) {
diff --git a/arch/mips/txx9/generic/smsc_fdc37m81x.c b/arch/mips/txx9/generic/smsc_fdc37m81x.c
index f98baa6263d2..40f4098d3ae1 100644
--- a/arch/mips/txx9/generic/smsc_fdc37m81x.c
+++ b/arch/mips/txx9/generic/smsc_fdc37m81x.c
@@ -105,9 +105,8 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port)
 	u8 chip_id;
 
 	if (g_smsc_fdc37m81x_base)
-		printk(KERN_WARNING "%s: stepping on old base=0x%0*lx\n",
-		       __func__,
-		       field, g_smsc_fdc37m81x_base);
+		pr_warn("%s: stepping on old base=0x%0*lx\n", __func__, field,
+			g_smsc_fdc37m81x_base);
 
 	g_smsc_fdc37m81x_base = port;
 
@@ -117,8 +116,7 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port)
 	if (chip_id == SMSC_FDC37M81X_CHIP_ID)
 		smsc_fdc37m81x_config_end();
 	else {
-		printk(KERN_WARNING "%s: unknown chip id 0x%02x\n", __func__,
-		       chip_id);
+		pr_warn("%s: unknown chip id 0x%02x\n", __func__, chip_id);
 		g_smsc_fdc37m81x_base = 0;
 	}
 
@@ -128,9 +126,8 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port)
 #ifdef DEBUG
 static void smsc_fdc37m81x_config_dump_one(const char *key, u8 dev, u8 reg)
 {
-	printk(KERN_INFO "%s: dev=0x%02x reg=0x%02x val=0x%02x\n",
-	       key, dev, reg,
-	       smsc_fdc37m81x_rd(reg));
+	pr_info("%s: dev=0x%02x reg=0x%02x val=0x%02x\n", key, dev, reg,
+		smsc_fdc37m81x_rd(reg));
 }
 
 void smsc_fdc37m81x_config_dump(void)
@@ -142,7 +139,7 @@ void smsc_fdc37m81x_config_dump(void)
 
 	orig = smsc_fdc37m81x_rd(SMSC_FDC37M81X_DNUM);
 
-	printk(KERN_INFO "%s: common\n", fname);
+	pr_info("%s: common\n", fname);
 	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
 				       SMSC_FDC37M81X_DNUM);
 	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
@@ -154,7 +151,7 @@ void smsc_fdc37m81x_config_dump(void)
 	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
 				       SMSC_FDC37M81X_PMGT);
 
-	printk(KERN_INFO "%s: keyboard\n", fname);
+	pr_info("%s: keyboard\n", fname);
 	smsc_dc37m81x_wr(SMSC_FDC37M81X_DNUM, SMSC_FDC37M81X_KBD);
 	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD,
 				       SMSC_FDC37M81X_ACTIVE);
diff --git a/arch/mips/txx9/jmr3927/prom.c b/arch/mips/txx9/jmr3927/prom.c
index c899c0c087a0..68a96473c134 100644
--- a/arch/mips/txx9/jmr3927/prom.c
+++ b/arch/mips/txx9/jmr3927/prom.c
@@ -45,7 +45,7 @@ void __init jmr3927_prom_init(void)
 {
 	/* CCFG */
 	if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0)
-		printk(KERN_ERR "TX3927 TLB off\n");
+		pr_err("TX3927 TLB off\n");
 
 	add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM);
 	txx9_sio_putchar_init(TX3927_SIO_REG(1));
diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c
index a455166dc6d4..613943886e34 100644
--- a/arch/mips/txx9/jmr3927/setup.c
+++ b/arch/mips/txx9/jmr3927/setup.c
@@ -150,12 +150,11 @@ static void __init jmr3927_board_init(void)
 
 	jmr3927_led_set(0);
 
-	printk(KERN_INFO
-	       "JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
-	       jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
-	       jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
-	       jmr3927_dipsw1(), jmr3927_dipsw2(),
-	       jmr3927_dipsw3(), jmr3927_dipsw4());
+	pr_info("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
+		jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
+		jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
+		jmr3927_dipsw1(), jmr3927_dipsw2(),
+		jmr3927_dipsw3(), jmr3927_dipsw4());
 }
 
 /* This trick makes rtc-ds1742 driver usable as is. */
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
index 07939ed6b22f..e68eb2e7ce0c 100644
--- a/arch/mips/txx9/rbtx4938/setup.c
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -123,15 +123,15 @@ static int __init rbtx4938_ethaddr_init(void)
 
 	/* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */
 	if (spi_eeprom_read(SPI_BUSNO, SEEPROM1_CS, 0, dat, sizeof(dat))) {
-		printk(KERN_ERR "seeprom: read error.\n");
+		pr_err("seeprom: read error.\n");
 		return -ENODEV;
 	} else {
 		if (strcmp(dat, "MAC") != 0)
-			printk(KERN_WARNING "seeprom: bad signature.\n");
+			pr_warn("seeprom: bad signature.\n");
 		for (i = 0, sum = 0; i < sizeof(dat); i++)
 			sum += dat[i];
 		if (sum)
-			printk(KERN_WARNING "seeprom: bad checksum.\n");
+			pr_warn("seeprom: bad checksum.\n");
 	}
 	tx4938_ethaddr_init(&dat[4], &dat[4 + 6]);
 #endif /* CONFIG_PCI */
@@ -214,14 +214,14 @@ static void __init rbtx4938_mem_setup(void)
 	rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
 	rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
 	if (request_resource(&txx9_ce_res[2], &rbtx4938_fpga_resource))
-		printk(KERN_ERR "request resource for fpga failed\n");
+		pr_err("request resource for fpga failed\n");
 
 	_machine_restart = rbtx4938_machine_restart;
 
 	writeb(0xff, rbtx4938_led_addr);
-	printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n",
-	       readb(rbtx4938_fpga_rev_addr),
-	       readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr));
+	pr_info("RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n",
+		readb(rbtx4938_fpga_rev_addr),
+		readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr));
 }
 
 static void __init rbtx4938_ne_init(void)
-- 
cgit v1.2.3


From e4c64e6f3dd38cb902c9a304a1fa6c1bdd0da67c Mon Sep 17 00:00:00 2001
From: Paul Bolle <pebolle@tiscali.nl>
Date: Fri, 25 Nov 2016 13:36:18 +0100
Subject: MIPS: Zboot: Don't use $(LINUXINCLUDE) twice

The make variables KBUILD_CFLAGS and KBUILD_AFLAGS both contain
$(LINUXINCLUDE). But the build already picks up $(LINUXINCLUDE) from
scripts/Makefile.lib. The net effect is that the (long) list of include
directories is used twice.

This is harmless but pointless. So stop using $(LINUXINCLUDE) twice.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14622/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/boot/compressed/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index 011b14512c05..41564a4db6f7 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -22,10 +22,10 @@ KBUILD_CFLAGS := $(shell echo $(KBUILD_CFLAGS) | sed -e "s/-pg//")
 
 KBUILD_CFLAGS := $(filter-out -fstack-protector, $(KBUILD_CFLAGS))
 
-KBUILD_CFLAGS := $(LINUXINCLUDE) $(KBUILD_CFLAGS) -D__KERNEL__ \
+KBUILD_CFLAGS := $(KBUILD_CFLAGS) -D__KERNEL__ \
 	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull"
 
-KBUILD_AFLAGS := $(LINUXINCLUDE) $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
+KBUILD_AFLAGS := $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
 	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) \
 	-DKERNEL_ENTRY=$(VMLINUX_ENTRY_ADDRESS)
 
-- 
cgit v1.2.3


From f9f1c8db1c37253805eaa32265e1e1af3ae7d0a4 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Thu, 15 Dec 2016 12:27:21 +0100
Subject: MIPS: IP22: Reformat inline assembler code to modern standards.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/mm/sc-ip22.c | 43 +++++++++++++++++++++++--------------------
 1 file changed, 23 insertions(+), 20 deletions(-)

diff --git a/arch/mips/mm/sc-ip22.c b/arch/mips/mm/sc-ip22.c
index 026cb59a914d..610f44b4d764 100644
--- a/arch/mips/mm/sc-ip22.c
+++ b/arch/mips/mm/sc-ip22.c
@@ -31,26 +31,29 @@ static inline void indy_sc_wipe(unsigned long first, unsigned long last)
 	unsigned long tmp;
 
 	__asm__ __volatile__(
-	".set\tpush\t\t\t# indy_sc_wipe\n\t"
-	".set\tnoreorder\n\t"
-	".set\tmips3\n\t"
-	".set\tnoat\n\t"
-	"mfc0\t%2, $12\n\t"
-	"li\t$1, 0x80\t\t\t# Go 64 bit\n\t"
-	"mtc0\t$1, $12\n\t"
-
-	"dli\t$1, 0x9000000080000000\n\t"
-	"or\t%0, $1\t\t\t# first line to flush\n\t"
-	"or\t%1, $1\t\t\t# last line to flush\n\t"
-	".set\tat\n\t"
-
-	"1:\tsw\t$0, 0(%0)\n\t"
-	"bne\t%0, %1, 1b\n\t"
-	" daddu\t%0, 32\n\t"
-
-	"mtc0\t%2, $12\t\t\t# Back to 32 bit\n\t"
-	"nop; nop; nop; nop;\n\t"
-	".set\tpop"
+	"	.set	push			# indy_sc_wipe		\n"
+	"	.set	noreorder					\n"
+	"	.set	mips3						\n"
+	"	.set	noat						\n"
+	"	mfc0	%2, $12						\n"
+	"	li	$1, 0x80		# Go 64 bit		\n"
+	"	mtc0	$1, $12						\n"
+	"								\n"
+	"	dli	$1, 0x9000000080000000				\n"
+	"	or	%0, $1			# first line to flush	\n"
+	"	or	%1, $1			# last line to flush	\n"
+	"	.set	at						\n"
+	"								\n"
+	"1:	sw	$0, 0(%0)					\n"
+	"	bne	%0, %1, 1b					\n"
+	"	 daddu	%0, 32						\n"
+	"								\n"
+	"	mtc0	%2, $12			# Back to 32 bit	\n"
+	"	nop				# pipeline hazard	\n"
+	"	nop							\n"
+	"	nop							\n"
+	"	nop							\n"
+	"	.set	pop						\n"
 	: "=r" (first), "=r" (last), "=&r" (tmp)
 	: "0" (first), "1" (last));
 }
-- 
cgit v1.2.3


From ae2f5e5ed04a17c1aa1f0a3714c725e12c21d2a9 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Thu, 15 Dec 2016 12:39:22 +0100
Subject: MIPS: IP22: Fix build error due to binutils 2.25 uselessnes.

Fix the following build error with binutils 2.25.

  CC      arch/mips/mm/sc-ip22.o
{standard input}: Assembler messages:
{standard input}:132: Error: number (0x9000000080000000) larger than 32 bits
{standard input}:159: Error: number (0x9000000080000000) larger than 32 bits
{standard input}:200: Error: number (0x9000000080000000) larger than 32 bits
scripts/Makefile.build:293: recipe for target 'arch/mips/mm/sc-ip22.o' failed
make[1]: *** [arch/mips/mm/sc-ip22.o] Error 1

MIPS has used .set mips3 to temporarily switch the assembler to 64 bit
mode in 64 bit kernels virtually forever.  Binutils 2.25 broke this
behavious partially by happily accepting 64 bit instructions in .set mips3
mode but puking on 64 bit constants when generating 32 bit ELF.  Binutils
2.26 restored the old behaviour again.

Fix build with binutils 2.25 by open coding the offending

	dli $1, 0x9000000080000000

as

	li	$1, 0x9000
	dsll	$1, $1, 48

which is ugly be the only thing that will build on all binutils vintages.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: stable@vger.kernel.org
---
 arch/mips/mm/sc-ip22.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/arch/mips/mm/sc-ip22.c b/arch/mips/mm/sc-ip22.c
index 610f44b4d764..f293a97cb885 100644
--- a/arch/mips/mm/sc-ip22.c
+++ b/arch/mips/mm/sc-ip22.c
@@ -39,7 +39,18 @@ static inline void indy_sc_wipe(unsigned long first, unsigned long last)
 	"	li	$1, 0x80		# Go 64 bit		\n"
 	"	mtc0	$1, $12						\n"
 	"								\n"
-	"	dli	$1, 0x9000000080000000				\n"
+	"	#							\n"
+	"	# Open code a dli $1, 0x9000000080000000		\n"
+	"	#							\n"
+	"	# Required because binutils 2.25 will happily accept	\n"
+	"	# 64 bit instructions in .set mips3 mode but puke on	\n"
+	"	# 64 bit constants when generating 32 bit ELF		\n"
+	"	#							\n"
+	"	lui	$1,0x9000					\n"
+	"	dsll	$1,$1,0x10					\n"
+	"	ori	$1,$1,0x8000					\n"
+	"	dsll	$1,$1,0x10					\n"
+	"								\n"
 	"	or	%0, $1			# first line to flush	\n"
 	"	or	%1, $1			# last line to flush	\n"
 	"	.set	at						\n"
-- 
cgit v1.2.3


From fe8bd18ffea5327344d4ec2bf11f47951212abd0 Mon Sep 17 00:00:00 2001
From: Matt Redfearn <matt.redfearn@imgtec.com>
Date: Mon, 19 Dec 2016 14:20:56 +0000
Subject: MIPS: Introduce irq_stack

Allocate a per-cpu irq stack for use within interrupt handlers.

Also add a utility function on_irq_stack to determine if a given stack
pointer is within the irq stack for that cpu.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Acked-by: Jason A. Donenfeld <jason@zx2c4.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14740/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/irq.h    | 12 ++++++++++++
 arch/mips/kernel/asm-offsets.c |  1 +
 arch/mips/kernel/irq.c         | 11 +++++++++++
 3 files changed, 24 insertions(+)

diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h
index 6bf10e796553..956db6e201d1 100644
--- a/arch/mips/include/asm/irq.h
+++ b/arch/mips/include/asm/irq.h
@@ -17,6 +17,18 @@
 
 #include <irq.h>
 
+#define IRQ_STACK_SIZE			THREAD_SIZE
+
+extern void *irq_stack[NR_CPUS];
+
+static inline bool on_irq_stack(int cpu, unsigned long sp)
+{
+	unsigned long low = (unsigned long)irq_stack[cpu];
+	unsigned long high = low + IRQ_STACK_SIZE;
+
+	return (low <= sp && sp <= high);
+}
+
 #ifdef CONFIG_I8259
 static inline int irq_canonicalize(int irq)
 {
diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
index 6080582a26d1..a7277698d328 100644
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -102,6 +102,7 @@ void output_thread_info_defines(void)
 	OFFSET(TI_REGS, thread_info, regs);
 	DEFINE(_THREAD_SIZE, THREAD_SIZE);
 	DEFINE(_THREAD_MASK, THREAD_MASK);
+	DEFINE(_IRQ_STACK_SIZE, IRQ_STACK_SIZE);
 	BLANK();
 }
 
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index f8f5836eb3c1..ba150c755fcc 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -25,6 +25,8 @@
 #include <linux/atomic.h>
 #include <linux/uaccess.h>
 
+void *irq_stack[NR_CPUS];
+
 /*
  * 'what should we do if we get a hw irq event on an illegal vector'.
  * each architecture has to answer this themselves.
@@ -58,6 +60,15 @@ void __init init_IRQ(void)
 		clear_c0_status(ST0_IM);
 
 	arch_init_irq();
+
+	for_each_possible_cpu(i) {
+		int irq_pages = IRQ_STACK_SIZE / PAGE_SIZE;
+		void *s = (void *)__get_free_pages(GFP_KERNEL, irq_pages);
+
+		irq_stack[i] = s;
+		pr_debug("CPU%d IRQ stack at 0x%p - 0x%p\n", i,
+			irq_stack[i], irq_stack[i] + IRQ_STACK_SIZE);
+	}
 }
 
 #ifdef CONFIG_DEBUG_STACKOVERFLOW
-- 
cgit v1.2.3


From d42d8d106b0275b027c1e8992c42aecf933436ea Mon Sep 17 00:00:00 2001
From: Matt Redfearn <matt.redfearn@imgtec.com>
Date: Mon, 19 Dec 2016 14:20:57 +0000
Subject: MIPS: Stack unwinding while on IRQ stack

Within unwind stack, check if the stack pointer being unwound is within
the CPU's irq_stack and if so use that page rather than the task's stack
page.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Acked-by: Jason A. Donenfeld <jason@zx2c4.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Adam Buchbinder <adam.buchbinder@gmail.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14741/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/process.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index 5142b1dfe8a7..48e30e0469ef 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -33,6 +33,7 @@
 #include <asm/dsemul.h>
 #include <asm/dsp.h>
 #include <asm/fpu.h>
+#include <asm/irq.h>
 #include <asm/msa.h>
 #include <asm/pgtable.h>
 #include <asm/mipsregs.h>
@@ -511,7 +512,19 @@ EXPORT_SYMBOL(unwind_stack_by_address);
 unsigned long unwind_stack(struct task_struct *task, unsigned long *sp,
 			   unsigned long pc, unsigned long *ra)
 {
-	unsigned long stack_page = (unsigned long)task_stack_page(task);
+	unsigned long stack_page = 0;
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		if (on_irq_stack(cpu, *sp)) {
+			stack_page = (unsigned long)irq_stack[cpu];
+			break;
+		}
+	}
+
+	if (!stack_page)
+		stack_page = (unsigned long)task_stack_page(task);
+
 	return unwind_stack_by_address(stack_page, sp, pc, ra);
 }
 #endif
-- 
cgit v1.2.3


From 510d86362a27577f5ee23f46cfb354ad49731e61 Mon Sep 17 00:00:00 2001
From: Matt Redfearn <matt.redfearn@imgtec.com>
Date: Mon, 19 Dec 2016 14:20:58 +0000
Subject: MIPS: Only change $28 to thread_info if coming from user mode

The SAVE_SOME macro is used to save the execution context on all
exceptions.
If an exception occurs while executing user code, the stack is switched
to the kernel's stack for the current task, and register $28 is switched
to point to the current_thread_info, which is at the bottom of the stack
region.
If the exception occurs while executing kernel code, the stack is left,
and this change ensures that register $28 is not updated. This is the
correct behaviour when the kernel can be executing on the separate irq
stack, because the thread_info will not be at the base of it.

With this change, register $28 is only switched to it's kernel
conventional usage of the currrent thread info pointer at the point at
which execution enters kernel space. Doing it on every exception was
redundant, but OK without an IRQ stack, but will be erroneous once that
is introduced.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Acked-by: Jason A. Donenfeld <jason@zx2c4.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14742/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/stackframe.h | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h
index eebf39549606..2f182bdf024f 100644
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
@@ -216,12 +216,19 @@
 		LONG_S	$25, PT_R25(sp)
 		LONG_S	$28, PT_R28(sp)
 		LONG_S	$31, PT_R31(sp)
+
+		/* Set thread_info if we're coming from user mode */
+		mfc0	k0, CP0_STATUS
+		sll	k0, 3		/* extract cu0 bit */
+		bltz	k0, 9f
+
 		ori	$28, sp, _THREAD_MASK
 		xori	$28, _THREAD_MASK
 #ifdef CONFIG_CPU_CAVIUM_OCTEON
 		.set    mips64
 		pref    0, 0($28)       /* Prefetch the current pointer */
 #endif
+9:
 		.set	pop
 		.endm
 
-- 
cgit v1.2.3


From dda45f701c9d7ad4ac0bb446e3a96f6df9a468d9 Mon Sep 17 00:00:00 2001
From: Matt Redfearn <matt.redfearn@imgtec.com>
Date: Mon, 19 Dec 2016 14:20:59 +0000
Subject: MIPS: Switch to the irq_stack in interrupts

When enterring interrupt context via handle_int or except_vec_vi, switch
to the irq_stack of the current CPU if it is not already in use.

The current stack pointer is masked with the thread size and compared to
the base or the irq stack. If it does not match then the stack pointer
is set to the top of that stack, otherwise this is a nested irq being
handled on the irq stack so the stack pointer should be left as it was.

The in-use stack pointer is placed in the callee saved register s1. It
will be saved to the stack when plat_irq_dispatch is invoked and can be
restored once control returns here.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Acked-by: Jason A. Donenfeld <jason@zx2c4.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14743/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/genex.S | 81 +++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 76 insertions(+), 5 deletions(-)

diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index dc0b29612891..0a7ba4b2f687 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -187,9 +187,44 @@ NESTED(handle_int, PT_SIZE, sp)
 
 	LONG_L	s0, TI_REGS($28)
 	LONG_S	sp, TI_REGS($28)
-	PTR_LA	ra, ret_from_irq
-	PTR_LA	v0, plat_irq_dispatch
-	jr	v0
+
+	/*
+	 * SAVE_ALL ensures we are using a valid kernel stack for the thread.
+	 * Check if we are already using the IRQ stack.
+	 */
+	move	s1, sp # Preserve the sp
+
+	/* Get IRQ stack for this CPU */
+	ASM_CPUID_MFC0	k0, ASM_SMP_CPUID_REG
+#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
+	lui	k1, %hi(irq_stack)
+#else
+	lui	k1, %highest(irq_stack)
+	daddiu	k1, %higher(irq_stack)
+	dsll	k1, 16
+	daddiu	k1, %hi(irq_stack)
+	dsll	k1, 16
+#endif
+	LONG_SRL	k0, SMP_CPUID_PTRSHIFT
+	LONG_ADDU	k1, k0
+	LONG_L	t0, %lo(irq_stack)(k1)
+
+	# Check if already on IRQ stack
+	PTR_LI	t1, ~(_THREAD_SIZE-1)
+	and	t1, t1, sp
+	beq	t0, t1, 2f
+
+	/* Switch to IRQ stack */
+	li	t1, _IRQ_STACK_SIZE
+	PTR_ADD sp, t0, t1
+
+2:
+	jal	plat_irq_dispatch
+
+	/* Restore sp */
+	move	sp, s1
+
+	j	ret_from_irq
 #ifdef CONFIG_CPU_MICROMIPS
 	nop
 #endif
@@ -262,8 +297,44 @@ NESTED(except_vec_vi_handler, 0, sp)
 
 	LONG_L	s0, TI_REGS($28)
 	LONG_S	sp, TI_REGS($28)
-	PTR_LA	ra, ret_from_irq
-	jr	v0
+
+	/*
+	 * SAVE_ALL ensures we are using a valid kernel stack for the thread.
+	 * Check if we are already using the IRQ stack.
+	 */
+	move	s1, sp # Preserve the sp
+
+	/* Get IRQ stack for this CPU */
+	ASM_CPUID_MFC0	k0, ASM_SMP_CPUID_REG
+#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
+	lui	k1, %hi(irq_stack)
+#else
+	lui	k1, %highest(irq_stack)
+	daddiu	k1, %higher(irq_stack)
+	dsll	k1, 16
+	daddiu	k1, %hi(irq_stack)
+	dsll	k1, 16
+#endif
+	LONG_SRL	k0, SMP_CPUID_PTRSHIFT
+	LONG_ADDU	k1, k0
+	LONG_L	t0, %lo(irq_stack)(k1)
+
+	# Check if already on IRQ stack
+	PTR_LI	t1, ~(_THREAD_SIZE-1)
+	and	t1, t1, sp
+	beq	t0, t1, 2f
+
+	/* Switch to IRQ stack */
+	li	t1, _IRQ_STACK_SIZE
+	PTR_ADD sp, t0, t1
+
+2:
+	jal	plat_irq_dispatch
+
+	/* Restore sp */
+	move	sp, s1
+
+	j	ret_from_irq
 	END(except_vec_vi_handler)
 
 /*
-- 
cgit v1.2.3


From 3cc3434fd6307d06b53b98ce83e76bf9807689b9 Mon Sep 17 00:00:00 2001
From: Matt Redfearn <matt.redfearn@imgtec.com>
Date: Mon, 19 Dec 2016 14:21:00 +0000
Subject: MIPS: Select HAVE_IRQ_EXIT_ON_IRQ_STACK

Since do_IRQ is now invoked on a separate IRQ stack, we select
HAVE_IRQ_EXIT_ON_IRQ_STACK so that softirq's may be invoked directly
from irq_exit(), rather than requiring do_softirq_own_stack.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Acked-by: Jason A. Donenfeld <jason@zx2c4.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14744/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index b3c5bde43d34..80832aa8e4fb 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -9,6 +9,7 @@ config MIPS
 	select HAVE_CONTEXT_TRACKING
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_IDE
+	select HAVE_IRQ_EXIT_ON_IRQ_STACK
 	select HAVE_OPROFILE
 	select HAVE_PERF_EVENTS
 	select PERF_USE_VMALLOC
-- 
cgit v1.2.3


From 715e20eb41cc8b48f92d959da2faaac61d110349 Mon Sep 17 00:00:00 2001
From: "Steven J. Hill" <Steven.Hill@cavium.com>
Date: Tue, 22 Nov 2016 13:44:10 -0600
Subject: MIPS: Octeon: Add fw_init_cmdline() for Cavium platforms.

Add platform-specific kernel command line processing for Octeon.

Signed-off-by: Steven J. Hill <steven.hill@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14599/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/cavium-octeon/setup.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index 9a2db1c013d9..4809ce4719d1 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -949,6 +949,22 @@ static __init void memory_exclude_page(u64 addr, u64 *mem, u64 *size)
 }
 #endif /* CONFIG_CRASH_DUMP */
 
+void __init fw_init_cmdline(void)
+{
+	int i;
+
+	octeon_boot_desc_ptr = (struct octeon_boot_descriptor *)fw_arg3;
+	for (i = 0; i < octeon_boot_desc_ptr->argc; i++) {
+		const char *arg =
+			cvmx_phys_to_ptr(octeon_boot_desc_ptr->argv[i]);
+		if (strlen(arcs_cmdline) + strlen(arg) + 1 <
+			   sizeof(arcs_cmdline) - 1) {
+			strcat(arcs_cmdline, " ");
+			strcat(arcs_cmdline, arg);
+		}
+	}
+}
+
 void __init plat_mem_setup(void)
 {
 	uint64_t mem_alloc_size;
-- 
cgit v1.2.3


From 126c1113bf3e6facdd5562064043b9e8fa8c9bf1 Mon Sep 17 00:00:00 2001
From: "Steven J. Hill" <Steven.Hill@cavium.com>
Date: Tue, 22 Nov 2016 13:44:20 -0600
Subject: MIPS: Octeon: Add plat_get_fdt() function for Cavium platforms.

Add in the function needed for Octeon platforms to support KASLR.

Signed-off-by: Steven J. Hill <Steven.Hill@cavium.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/cavium-octeon/setup.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index 4809ce4719d1..d9dbeb0b165b 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -965,6 +965,13 @@ void __init fw_init_cmdline(void)
 	}
 }
 
+void __init *plat_get_fdt(void)
+{
+	octeon_bootinfo =
+		cvmx_phys_to_ptr(octeon_boot_desc_ptr->cvmx_desc_vaddr);
+	return phys_to_virt(octeon_bootinfo->fdt_addr);
+}
+
 void __init plat_mem_setup(void)
 {
 	uint64_t mem_alloc_size;
-- 
cgit v1.2.3


From 3ff72be4c9ce269c5b7adff9b0f912a2df3cb987 Mon Sep 17 00:00:00 2001
From: "Steven J. Hill" <steven.hill@cavium.com>
Date: Tue, 13 Dec 2016 14:25:37 -0600
Subject: MIPS: Octeon: Enable KASLR

This patch enables KASLR for Octeon systems. The SMP startup code is
such that the secondaries monitor the volatile variable
'octeon_processor_relocated_kernel_entry' for any non-zero value.
The 'plat_post_relocation hook' is used to set that value to the
kernel entry point of the relocated kernel. The secondary CPUs will
then jusmp to the new kernel, perform their initialization again
and begin waiting for the boot CPU to start them via the relocated
loop 'octeon_spin_wait_boot'. Inspired by Steven's code from Cavium.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Signed-off-by: Steven J. Hill <steven.hill@cavium.com>
Acked-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14669/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Kconfig                                    |  3 ++-
 arch/mips/cavium-octeon/smp.c                        | 20 ++++++++++++++++++--
 .../asm/mach-cavium-octeon/kernel-entry-init.h       | 15 +++++++++++++--
 3 files changed, 33 insertions(+), 5 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 80832aa8e4fb..7cb4b0e5f49a 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -910,6 +910,7 @@ config CAVIUM_OCTEON_SOC
 	select NR_CPUS_DEFAULT_16
 	select BUILTIN_DTB
 	select MTD_COMPLEX_MAPPINGS
+	select SYS_SUPPORTS_RELOCATABLE
 	help
 	  This option supports all of the Octeon reference boards from Cavium
 	  Networks. It builds a kernel that dynamically determines the Octeon
@@ -2571,7 +2572,7 @@ config SYS_SUPPORTS_NUMA
 
 config RELOCATABLE
 	bool "Relocatable kernel"
-	depends on SYS_SUPPORTS_RELOCATABLE && (CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_MIPS32_R6 || CPU_MIPS64_R6)
+	depends on SYS_SUPPORTS_RELOCATABLE && (CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_MIPS32_R6 || CPU_MIPS64_R6 || CAVIUM_OCTEON_SOC)
 	help
 	  This builds a kernel image that retains relocation information
 	  so it can be loaded someplace besides the default 1MB.
diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c
index 256fe6f65cf2..889c3f49dbc0 100644
--- a/arch/mips/cavium-octeon/smp.c
+++ b/arch/mips/cavium-octeon/smp.c
@@ -24,12 +24,17 @@
 volatile unsigned long octeon_processor_boot = 0xff;
 volatile unsigned long octeon_processor_sp;
 volatile unsigned long octeon_processor_gp;
+#ifdef CONFIG_RELOCATABLE
+volatile unsigned long octeon_processor_relocated_kernel_entry;
+#endif /* CONFIG_RELOCATABLE */
 
 #ifdef CONFIG_HOTPLUG_CPU
 uint64_t octeon_bootloader_entry_addr;
 EXPORT_SYMBOL(octeon_bootloader_entry_addr);
 #endif
 
+extern void kernel_entry(unsigned long arg1, ...);
+
 static void octeon_icache_flush(void)
 {
 	asm volatile ("synci 0($0)\n");
@@ -180,6 +185,19 @@ static void __init octeon_smp_setup(void)
 	octeon_smp_hotplug_setup();
 }
 
+
+#ifdef CONFIG_RELOCATABLE
+int plat_post_relocation(long offset)
+{
+	unsigned long entry = (unsigned long)kernel_entry;
+
+	/* Send secondaries into relocated kernel */
+	octeon_processor_relocated_kernel_entry = entry + offset;
+
+	return 0;
+}
+#endif /* CONFIG_RELOCATABLE */
+
 /**
  * Firmware CPU startup hook
  *
@@ -333,8 +351,6 @@ void play_dead(void)
 		;
 }
 
-extern void kernel_entry(unsigned long arg1, ...);
-
 static void start_after_reset(void)
 {
 	kernel_entry(0, 0, 0);	/* set a2 = 0 for secondary core */
diff --git a/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h b/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
index c4873e8594ef..c38b38ce5a3d 100644
--- a/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
+++ b/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
@@ -99,9 +99,20 @@
 	# to begin
 	#
 
-	# This is the variable where the next core to boot os stored
-	PTR_LA	t0, octeon_processor_boot
 octeon_spin_wait_boot:
+#ifdef CONFIG_RELOCATABLE
+	PTR_LA	t0, octeon_processor_relocated_kernel_entry
+	LONG_L	t0, (t0)
+	beq	zero, t0, 1f
+	nop
+
+	jr	t0
+	nop
+1:
+#endif /* CONFIG_RELOCATABLE */
+
+	# This is the variable where the next core to boot is stored
+	PTR_LA	t0, octeon_processor_boot
 	# Get the core id of the next to be booted
 	LONG_L	t1, (t0)
 	# Keep looping if it isn't me
-- 
cgit v1.2.3


From 8cc709d7d4f013f51d38ceb2e3c8c82d230cf457 Mon Sep 17 00:00:00 2001
From: "Steven J. Hill" <Steven.Hill@cavium.com>
Date: Fri, 9 Dec 2016 02:36:22 -0600
Subject: MIPS: Relocatable: Provide plat_post_relocation hook

This hook provides the platform the chance to perform any required
setup before the boot processor switches to the relocated kernel.
The relocated kernel has been copied and fixed up ready for execution
at this point. Secondary CPUs may wish to switch to it early. There
is also the opportunity for the platform to abort jumping to the
relocated kernel if there is anything wrong with the chosen offset.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Signed-off-by: Steven J. Hill <Steven.Hill@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14651/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/relocate.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/mips/kernel/relocate.c b/arch/mips/kernel/relocate.c
index 1958910b75c0..c82288569eb1 100644
--- a/arch/mips/kernel/relocate.c
+++ b/arch/mips/kernel/relocate.c
@@ -31,6 +31,17 @@ extern u32 _relocation_end[];	/* End relocation table */
 extern long __start___ex_table;	/* Start exception table */
 extern long __stop___ex_table;	/* End exception table */
 
+/*
+ * This function may be defined for a platform to perform any post-relocation
+ * fixup necessary.
+ * Return non-zero to abort relocation
+ */
+int __weak plat_post_relocation(long offset)
+{
+	return 0;
+}
+
+
 static inline u32 __init get_synci_step(void)
 {
 	u32 res;
@@ -338,6 +349,15 @@ void *__init relocate_kernel(void)
 		 */
 		memcpy(RELOCATED(&__bss_start), &__bss_start, bss_length);
 
+		/*
+		 * Last chance for the platform to abort relocation.
+		 * This may also be used by the platform to perform any
+		 * initialisation required now that the new kernel is
+		 * resident in memory and ready to be executed.
+		 */
+		if (plat_post_relocation(offset))
+			goto out;
+
 		/* The current thread is now within the relocated image */
 		__current_thread_info = RE