From bfd546a552e140b0a4c8a21527c39d6d21addb28 Mon Sep 17 00:00:00 2001 From: Hui Wang Date: Tue, 28 May 2024 15:06:04 -0700 Subject: e1000e: move force SMBUS near the end of enable_ulp function The commit 861e8086029e ("e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue") introduces a regression on PCH_MTP_I219_LM18 (PCIID: 0x8086550A). Without the referred commit, the ethernet works well after suspend and resume, but after applying the commit, the ethernet couldn't work anymore after the resume and the dmesg shows that the NIC link changes to 10Mbps (1000Mbps originally): [ 43.305084] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 10 Mbps Full Duplex, Flow Control: Rx/Tx Without the commit, the force SMBUS code will not be executed if "return 0" or "goto out" is executed in the enable_ulp(), and in my case, the "goto out" is executed since FWSM_FW_VALID is set. But after applying the commit, the force SMBUS code will be ran unconditionally. Here move the force SMBUS code back to enable_ulp() and put it immediately ahead of hw->phy.ops.release(hw), this could allow the longest settling time as possible for interface in this function and doesn't change the original code logic. The issue was found on a Lenovo laptop with the ethernet hw as below: 00:1f.6 Ethernet controller [0200]: Intel Corporation Device [8086:550a] (rev 20). And this patch is verified (cable plug and unplug, system suspend and resume) on Lenovo laptops with ethernet hw: [8086:550a], [8086:550b], [8086:15bb], [8086:15be], [8086:1a1f], [8086:1a1c] and [8086:0dc7]. Fixes: 861e8086029e ("e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue") Signed-off-by: Hui Wang Acked-by: Vitaly Lifshits Tested-by: Naama Meir Reviewed-by: Simon Horman Reviewed-by: Paul Menzel Signed-off-by: Tony Nguyen Tested-by: Zhang Rui Signed-off-by: Jacob Keller Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-1-dc8593d2bbc6@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/e1000e/ich8lan.c | 22 ++++++++++++++++++++++ drivers/net/ethernet/intel/e1000e/netdev.c | 18 ------------------ 2 files changed, 22 insertions(+), 18 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index f9e94be36e97..2e98a2a0bead 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1225,6 +1225,28 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx) } release: + /* Switching PHY interface always returns MDI error + * so disable retry mechanism to avoid wasting time + */ + e1000e_disable_phy_retry(hw); + + /* Force SMBus mode in PHY */ + ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg); + if (ret_val) { + e1000e_enable_phy_retry(hw); + hw->phy.ops.release(hw); + goto out; + } + phy_reg |= CV_SMB_CTRL_FORCE_SMBUS; + e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg); + + e1000e_enable_phy_retry(hw); + + /* Force SMBus mode in MAC */ + mac_reg = er32(CTRL_EXT); + mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, mac_reg); + hw->phy.ops.release(hw); out: if (ret_val) diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 220d62fca55d..da5c59daf8ba 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -6623,7 +6623,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) struct e1000_hw *hw = &adapter->hw; u32 ctrl, ctrl_ext, rctl, status, wufc; int retval = 0; - u16 smb_ctrl; /* Runtime suspend should only enable wakeup for link changes */ if (runtime) @@ -6697,23 +6696,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) if (retval) return retval; } - - /* Force SMBUS to allow WOL */ - /* Switching PHY interface always returns MDI error - * so disable retry mechanism to avoid wasting time - */ - e1000e_disable_phy_retry(hw); - - e1e_rphy(hw, CV_SMB_CTRL, &smb_ctrl); - smb_ctrl |= CV_SMB_CTRL_FORCE_SMBUS; - e1e_wphy(hw, CV_SMB_CTRL, smb_ctrl); - - e1000e_enable_phy_retry(hw); - - /* Force SMBus mode in MAC */ - ctrl_ext = er32(CTRL_EXT); - ctrl_ext |= E1000_CTRL_EXT_FORCE_SMBUS; - ew32(CTRL_EXT, ctrl_ext); } /* Ensure that the appropriate bits are set in LPI_CTRL -- cgit v1.2.3 From 218ed820d364ddc2b0150951e6b1a1bd1e49469d Mon Sep 17 00:00:00 2001 From: Thinh Tran Date: Tue, 28 May 2024 15:06:05 -0700 Subject: i40e: factoring out i40e_suspend/i40e_resume Two new functions, i40e_io_suspend() and i40e_io_resume(), have been introduced. These functions were factored out from the existing i40e_suspend() and i40e_resume() respectively. This factoring was done due to concerns about the logic of the I40E_SUSPENSED state, which caused the device to be unable to recover. The functions are now used in the EEH handling for device suspend/resume callbacks. The function i40e_enable_mc_magic_wake() has been moved ahead of i40e_io_suspend() to ensure it is declared before being used. Tested-by: Robert Thomas Signed-off-by: Thinh Tran Reviewed-by: Simon Horman Tested-by: Pucha Himasekhar Reddy Reviewed-by: Jacob Keller Signed-off-by: Jacob Keller Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-2-dc8593d2bbc6@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/i40e/i40e_main.c | 249 +++++++++++++++------------- 1 file changed, 135 insertions(+), 114 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 1f188c052828..d5f25ea304bf 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -16334,6 +16334,139 @@ unmap: pci_disable_device(pdev); } +/** + * i40e_enable_mc_magic_wake - enable multicast magic packet wake up + * using the mac_address_write admin q function + * @pf: pointer to i40e_pf struct + **/ +static void i40e_enable_mc_magic_wake(struct i40e_pf *pf) +{ + struct i40e_vsi *main_vsi = i40e_pf_get_main_vsi(pf); + struct i40e_hw *hw = &pf->hw; + u8 mac_addr[6]; + u16 flags = 0; + int ret; + + /* Get current MAC address in case it's an LAA */ + if (main_vsi && main_vsi->netdev) { + ether_addr_copy(mac_addr, main_vsi->netdev->dev_addr); + } else { + dev_err(&pf->pdev->dev, + "Failed to retrieve MAC address; using default\n"); + ether_addr_copy(mac_addr, hw->mac.addr); + } + + /* The FW expects the mac address write cmd to first be called with + * one of these flags before calling it again with the multicast + * enable flags. + */ + flags = I40E_AQC_WRITE_TYPE_LAA_WOL; + + if (hw->func_caps.flex10_enable && hw->partition_id != 1) + flags = I40E_AQC_WRITE_TYPE_LAA_ONLY; + + ret = i40e_aq_mac_address_write(hw, flags, mac_addr, NULL); + if (ret) { + dev_err(&pf->pdev->dev, + "Failed to update MAC address registers; cannot enable Multicast Magic packet wake up"); + return; + } + + flags = I40E_AQC_MC_MAG_EN + | I40E_AQC_WOL_PRESERVE_ON_PFR + | I40E_AQC_WRITE_TYPE_UPDATE_MC_MAG; + ret = i40e_aq_mac_address_write(hw, flags, mac_addr, NULL); + if (ret) + dev_err(&pf->pdev->dev, + "Failed to enable Multicast Magic Packet wake up\n"); +} + +/** + * i40e_io_suspend - suspend all IO operations + * @pf: pointer to i40e_pf struct + * + **/ +static int i40e_io_suspend(struct i40e_pf *pf) +{ + struct i40e_hw *hw = &pf->hw; + + set_bit(__I40E_DOWN, pf->state); + + /* Ensure service task will not be running */ + del_timer_sync(&pf->service_timer); + cancel_work_sync(&pf->service_task); + + /* Client close must be called explicitly here because the timer + * has been stopped. + */ + i40e_notify_client_of_netdev_close(pf, false); + + if (test_bit(I40E_HW_CAP_WOL_MC_MAGIC_PKT_WAKE, pf->hw.caps) && + pf->wol_en) + i40e_enable_mc_magic_wake(pf); + + /* Since we're going to destroy queues during the + * i40e_clear_interrupt_scheme() we should hold the RTNL lock for this + * whole section + */ + rtnl_lock(); + + i40e_prep_for_reset(pf); + + wr32(hw, I40E_PFPM_APM, (pf->wol_en ? I40E_PFPM_APM_APME_MASK : 0)); + wr32(hw, I40E_PFPM_WUFC, (pf->wol_en ? I40E_PFPM_WUFC_MAG_MASK : 0)); + + /* Clear the interrupt scheme and release our IRQs so that the system + * can safely hibernate even when there are a large number of CPUs. + * Otherwise hibernation might fail when mapping all the vectors back + * to CPU0. + */ + i40e_clear_interrupt_scheme(pf); + + rtnl_unlock(); + + return 0; +} + +/** + * i40e_io_resume - resume IO operations + * @pf: pointer to i40e_pf struct + * + **/ +static int i40e_io_resume(struct i40e_pf *pf) +{ + struct device *dev = &pf->pdev->dev; + int err; + + /* We need to hold the RTNL lock prior to restoring interrupt schemes, + * since we're going to be restoring queues + */ + rtnl_lock(); + + /* We cleared the interrupt scheme when we suspended, so we need to + * restore it now to resume device functionality. + */ + err = i40e_restore_interrupt_scheme(pf); + if (err) { + dev_err(dev, "Cannot restore interrupt scheme: %d\n", + err); + } + + clear_bit(__I40E_DOWN, pf->state); + i40e_reset_and_rebuild(pf, false, true); + + rtnl_unlock(); + + /* Clear suspended state last after everything is recovered */ + clear_bit(__I40E_SUSPENDED, pf->state); + + /* Restart the service task */ + mod_timer(&pf->service_timer, + round_jiffies(jiffies + pf->service_timer_period)); + + return 0; +} + /** * i40e_pci_error_detected - warning that something funky happened in PCI land * @pdev: PCI device information struct @@ -16446,53 +16579,6 @@ static void i40e_pci_error_resume(struct pci_dev *pdev) i40e_handle_reset_warning(pf, false); } -/** - * i40e_enable_mc_magic_wake - enable multicast magic packet wake up - * using the mac_address_write admin q function - * @pf: pointer to i40e_pf struct - **/ -static void i40e_enable_mc_magic_wake(struct i40e_pf *pf) -{ - struct i40e_vsi *main_vsi = i40e_pf_get_main_vsi(pf); - struct i40e_hw *hw = &pf->hw; - u8 mac_addr[6]; - u16 flags = 0; - int ret; - - /* Get current MAC address in case it's an LAA */ - if (main_vsi && main_vsi->netdev) { - ether_addr_copy(mac_addr, main_vsi->netdev->dev_addr); - } else { - dev_err(&pf->pdev->dev, - "Failed to retrieve MAC address; using default\n"); - ether_addr_copy(mac_addr, hw->mac.addr); - } - - /* The FW expects the mac address write cmd to first be called with - * one of these flags before calling it again with the multicast - * enable flags. - */ - flags = I40E_AQC_WRITE_TYPE_LAA_WOL; - - if (hw->func_caps.flex10_enable && hw->partition_id != 1) - flags = I40E_AQC_WRITE_TYPE_LAA_ONLY; - - ret = i40e_aq_mac_address_write(hw, flags, mac_addr, NULL); - if (ret) { - dev_err(&pf->pdev->dev, - "Failed to update MAC address registers; cannot enable Multicast Magic packet wake up"); - return; - } - - flags = I40E_AQC_MC_MAG_EN - | I40E_AQC_WOL_PRESERVE_ON_PFR - | I40E_AQC_WRITE_TYPE_UPDATE_MC_MAG; - ret = i40e_aq_mac_address_write(hw, flags, mac_addr, NULL); - if (ret) - dev_err(&pf->pdev->dev, - "Failed to enable Multicast Magic Packet wake up\n"); -} - /** * i40e_shutdown - PCI callback for shutting down * @pdev: PCI device information struct @@ -16552,48 +16638,11 @@ static void i40e_shutdown(struct pci_dev *pdev) static int i40e_suspend(struct device *dev) { struct i40e_pf *pf = dev_get_drvdata(dev); - struct i40e_hw *hw = &pf->hw; /* If we're already suspended, then there is nothing to do */ if (test_and_set_bit(__I40E_SUSPENDED, pf->state)) return 0; - - set_bit(__I40E_DOWN, pf->state); - - /* Ensure service task will not be running */ - del_timer_sync(&pf->service_timer); - cancel_work_sync(&pf->service_task); - - /* Client close must be called explicitly here because the timer - * has been stopped. - */ - i40e_notify_client_of_netdev_close(pf, false); - - if (test_bit(I40E_HW_CAP_WOL_MC_MAGIC_PKT_WAKE, pf->hw.caps) && - pf->wol_en) - i40e_enable_mc_magic_wake(pf); - - /* Since we're going to destroy queues during the - * i40e_clear_interrupt_scheme() we should hold the RTNL lock for this - * whole section - */ - rtnl_lock(); - - i40e_prep_for_reset(pf); - - wr32(hw, I40E_PFPM_APM, (pf->wol_en ? I40E_PFPM_APM_APME_MASK : 0)); - wr32(hw, I40E_PFPM_WUFC, (pf->wol_en ? I40E_PFPM_WUFC_MAG_MASK : 0)); - - /* Clear the interrupt scheme and release our IRQs so that the system - * can safely hibernate even when there are a large number of CPUs. - * Otherwise hibernation might fail when mapping all the vectors back - * to CPU0. - */ - i40e_clear_interrupt_scheme(pf); - - rtnl_unlock(); - - return 0; + return i40e_io_suspend(pf); } /** @@ -16603,39 +16652,11 @@ static int i40e_suspend(struct device *dev) static int i40e_resume(struct device *dev) { struct i40e_pf *pf = dev_get_drvdata(dev); - int err; /* If we're not suspended, then there is nothing to do */ if (!test_bit(__I40E_SUSPENDED, pf->state)) return 0; - - /* We need to hold the RTNL lock prior to restoring interrupt schemes, - * since we're going to be restoring queues - */ - rtnl_lock(); - - /* We cleared the interrupt scheme when we suspended, so we need to - * restore it now to resume device functionality. - */ - err = i40e_restore_interrupt_scheme(pf); - if (err) { - dev_err(dev, "Cannot restore interrupt scheme: %d\n", - err); - } - - clear_bit(__I40E_DOWN, pf->state); - i40e_reset_and_rebuild(pf, false, true); - - rtnl_unlock(); - - /* Clear suspended state last after everything is recovered */ - clear_bit(__I40E_SUSPENDED, pf->state); - - /* Restart the service task */ - mod_timer(&pf->service_timer, - round_jiffies(jiffies + pf->service_timer_period)); - - return 0; + return i40e_io_resume(pf); } static const struct pci_error_handlers i40e_err_handler = { -- cgit v1.2.3 From c80b6538d35a7a60d874c5a76c3c5a82b6a28fbb Mon Sep 17 00:00:00 2001 From: Thinh Tran Date: Tue, 28 May 2024 15:06:06 -0700 Subject: i40e: Fully suspend and resume IO operations in EEH case When EEH events occurs, the callback functions in the i40e, which are managed by the EEH driver, will completely suspend and resume all IO operations. - In the PCI error detected callback, replaced i40e_prep_for_reset() with i40e_io_suspend(). The change is to fully suspend all I/O operations - In the PCI error slot reset callback, replaced pci_enable_device_mem() with pci_enable_device(). This change enables both I/O and memory of the device. - In the PCI error resume callback, replaced i40e_handle_reset_warning() with i40e_io_resume(). This change allows the system to resume I/O operations Fixes: a5f3d2c17b07 ("powerpc/pseries/pci: Add MSI domains") Reviewed-by: Jacob Keller Tested-by: Robert Thomas Signed-off-by: Thinh Tran Reviewed-by: Simon Horman Tested-by: Pucha Himasekhar Reddy Signed-off-by: Jacob Keller Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-3-dc8593d2bbc6@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/i40e/i40e_main.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index d5f25ea304bf..284c3fad5a6e 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -11171,6 +11171,8 @@ static void i40e_reset_and_rebuild(struct i40e_pf *pf, bool reinit, ret = i40e_reset(pf); if (!ret) i40e_rebuild(pf, reinit, lock_acquired); + else + dev_err(&pf->pdev->dev, "%s: i40e_reset() FAILED", __func__); } /** @@ -16491,7 +16493,7 @@ static pci_ers_result_t i40e_pci_error_detected(struct pci_dev *pdev, /* shutdown all operations */ if (!test_bit(__I40E_SUSPENDED, pf->state)) - i40e_prep_for_reset(pf); + i40e_io_suspend(pf); /* Request a slot reset */ return PCI_ERS_RESULT_NEED_RESET; @@ -16513,7 +16515,8 @@ static pci_ers_result_t i40e_pci_error_slot_reset(struct pci_dev *pdev) u32 reg; dev_dbg(&pdev->dev, "%s\n", __func__); - if (pci_enable_device_mem(pdev)) { + /* enable I/O and memory of the device */ + if (pci_enable_device(pdev)) { dev_info(&pdev->dev, "Cannot re-enable PCI device after reset.\n"); result = PCI_ERS_RESULT_DISCONNECT; @@ -16576,7 +16579,7 @@ static void i40e_pci_error_resume(struct pci_dev *pdev) if (test_bit(__I40E_SUSPENDED, pf->state)) return; - i40e_handle_reset_warning(pf, false); + i40e_io_resume(pf); } /** -- cgit v1.2.3 From 2a6d8f2de2224ac46df94dc40f43f8b9701f6703 Mon Sep 17 00:00:00 2001 From: Paul Greenwalt Date: Tue, 28 May 2024 15:06:08 -0700 Subject: ice: fix 200G PHY types to link speed mapping Commit 24407a01e57c ("ice: Add 200G speed/phy type use") added support for 200G PHY speeds, but did not include the mapping of 200G PHY types to link speed. As a result the driver is returning UNKNOWN link speed when setting 200G ethtool advertised link modes. To fix this add 200G PHY types to link speed mapping to ice_get_link_speed_based_on_phy_type(). Fixes: 24407a01e57c ("ice: Add 200G speed/phy type use") Reviewed-by: Michal Swiatkowski Signed-off-by: Paul Greenwalt Tested-by: Pucha Himasekhar Reddy Signed-off-by: Jacob Keller Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-5-dc8593d2bbc6@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/ice/ice_common.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c index 5649b257e631..24716a3b494c 100644 --- a/drivers/net/ethernet/intel/ice/ice_common.c +++ b/drivers/net/ethernet/intel/ice/ice_common.c @@ -3148,6 +3148,16 @@ ice_get_link_speed_based_on_phy_type(u64 phy_type_low, u64 phy_type_high) case ICE_PHY_TYPE_HIGH_100G_AUI2: speed_phy_type_high = ICE_AQ_LINK_SPEED_100GB; break; + case ICE_PHY_TYPE_HIGH_200G_CR4_PAM4: + case ICE_PHY_TYPE_HIGH_200G_SR4: + case ICE_PHY_TYPE_HIGH_200G_FR4: + case ICE_PHY_TYPE_HIGH_200G_LR4: + case ICE_PHY_TYPE_HIGH_200G_DR4: + case ICE_PHY_TYPE_HIGH_200G_KR4_PAM4: + case ICE_PHY_TYPE_HIGH_200G_AUI4_AOC_ACC: + case ICE_PHY_TYPE_HIGH_200G_AUI4: + speed_phy_type_high = ICE_AQ_LINK_SPEED_200GB; + break; default: speed_phy_type_high = ICE_AQ_LINK_SPEED_UNKNOWN; break; -- cgit v1.2.3 From a51c9b1c9ab2351e62933357fcad5bfad27f2400 Mon Sep 17 00:00:00 2001 From: Dave Ertman Date: Tue, 28 May 2024 15:06:11 -0700 Subject: ice: check for unregistering correct number of devlink params On module load, the ice driver checks for the lack of a specific PF capability to determine if it should reduce the number of devlink params to register. One situation when this test returns true is when the driver loads in safe mode. The same check is not present on the unload path when devlink params are unregistered. This results in the driver triggering a WARN_ON in the kernel devlink code. The current check and code path uses a reduction in the number of elements reported in the list of params. This is fragile and not good for future maintaining. Change the parameters to be held in two lists, one always registered and one dependent on the check. Add a symmetrical check in the unload path so that the correct parameters are unregistered as well. Fixes: 109eb2917284 ("ice: Add tx_scheduling_layers devlink param") CC: Lukasz Czapnik Reviewed-by: Przemek Kitszel Signed-off-by: Dave Ertman Reviewed-by: Jacob Keller Tested-by: Pucha Himasekhar Reddy Signed-off-by: Jacob Keller Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-8-dc8593d2bbc6@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/ice/devlink/devlink.c | 31 +++++++++++++++++------- 1 file changed, 22 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/intel/ice/devlink/devlink.c b/drivers/net/ethernet/intel/ice/devlink/devlink.c index c4b69655cdf5..704e9ad5144e 100644 --- a/drivers/net/ethernet/intel/ice/devlink/devlink.c +++ b/drivers/net/ethernet/intel/ice/devlink/devlink.c @@ -1388,7 +1388,7 @@ enum ice_param_id { ICE_DEVLINK_PARAM_ID_TX_SCHED_LAYERS, }; -static const struct devlink_param ice_devlink_params[] = { +static const struct devlink_param ice_dvl_rdma_params[] = { DEVLINK_PARAM_GENERIC(ENABLE_ROCE, BIT(DEVLINK_PARAM_CMODE_RUNTIME), ice_devlink_enable_roce_get, ice_devlink_enable_roce_set, @@ -1397,6 +1397,9 @@ static const struct devlink_param ice_devlink_params[] = { ice_devlink_enable_iw_get, ice_devlink_enable_iw_set, ice_devlink_enable_iw_validate), +}; + +static const struct devlink_param ice_dvl_sched_params[] = { DEVLINK_PARAM_DRIVER(ICE_DEVLINK_PARAM_ID_TX_SCHED_LAYERS, "tx_scheduling_layers", DEVLINK_PARAM_TYPE_U8, @@ -1464,21 +1467,31 @@ int ice_devlink_register_params(struct ice_pf *pf) { struct devlink *devlink = priv_to_devlink(pf); struct ice_hw *hw = &pf->hw; - size_t params_size; + int status; - params_size = ARRAY_SIZE(ice_devlink_params); + status = devl_params_register(devlink, ice_dvl_rdma_params, + ARRAY_SIZE(ice_dvl_rdma_params)); + if (status) + return status; - if (!hw->func_caps.common_cap.tx_sched_topo_comp_mode_en) - params_size--; + if (hw->func_caps.common_cap.tx_sched_topo_comp_mode_en) + status = devl_params_register(devlink, ice_dvl_sched_params, + ARRAY_SIZE(ice_dvl_sched_params)); - return devl_params_register(devlink, ice_devlink_params, - params_size); + return status; } void ice_devlink_unregister_params(struct ice_pf *pf) { - devl_params_unregister(priv_to_devlink(pf), ice_devlink_params, - ARRAY_SIZE(ice_devlink_params)); + struct devlink *devlink = priv_to_devlink(pf); + struct ice_hw *hw = &pf->hw; + + devl_params_unregister(devlink, ice_dvl_rdma_params, + ARRAY_SIZE(ice_dvl_rdma_params)); + + if (hw->func_caps.common_cap.tx_sched_topo_comp_mode_en) + devl_params_unregister(devlink, ice_dvl_sched_params, + ARRAY_SIZE(ice_dvl_sched_params)); } #define ICE_DEVLINK_READ_BLK_SIZE (1024 * 1024) -- cgit v1.2.3