From 3e3f354bc383a052cde431d8f051efbf896f260b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 24 Sep 2020 20:25:46 +0200 Subject: ARM: remove ebsa110 platform Russell said that he is no longer using this machine, and it seems that nobody else has in a long time, so it's time to say goodbye to it. As this is the last platform using CONFIG_ARCH_USES_GETTIMEOFFSET, there are some follow-up patches to remove that as well. Acked-by: Russell King Signed-off-by: Arnd Bergmann --- MAINTAINERS | 8 - arch/arm/Kconfig | 24 +- arch/arm/Kconfig.debug | 6 +- arch/arm/Makefile | 8 - arch/arm/configs/ebsa110_defconfig | 74 ---- arch/arm/kernel/Makefile | 6 +- arch/arm/mach-ebsa110/Makefile | 8 - arch/arm/mach-ebsa110/Makefile.boot | 5 - arch/arm/mach-ebsa110/core.c | 323 ----------------- arch/arm/mach-ebsa110/core.h | 38 -- arch/arm/mach-ebsa110/include/mach/entry-macro.S | 33 -- arch/arm/mach-ebsa110/include/mach/hardware.h | 21 -- arch/arm/mach-ebsa110/include/mach/io.h | 89 ----- arch/arm/mach-ebsa110/include/mach/irqs.h | 17 - arch/arm/mach-ebsa110/include/mach/memory.h | 22 -- arch/arm/mach-ebsa110/include/mach/uncompress.h | 41 --- arch/arm/mach-ebsa110/io.c | 440 ----------------------- arch/arm/mach-ebsa110/leds.c | 71 ---- drivers/watchdog/Kconfig | 2 +- 19 files changed, 7 insertions(+), 1229 deletions(-) delete mode 100644 arch/arm/configs/ebsa110_defconfig delete mode 100644 arch/arm/mach-ebsa110/Makefile delete mode 100644 arch/arm/mach-ebsa110/Makefile.boot delete mode 100644 arch/arm/mach-ebsa110/core.c delete mode 100644 arch/arm/mach-ebsa110/core.h delete mode 100644 arch/arm/mach-ebsa110/include/mach/entry-macro.S delete mode 100644 arch/arm/mach-ebsa110/include/mach/hardware.h delete mode 100644 arch/arm/mach-ebsa110/include/mach/io.h delete mode 100644 arch/arm/mach-ebsa110/include/mach/irqs.h delete mode 100644 arch/arm/mach-ebsa110/include/mach/memory.h delete mode 100644 arch/arm/mach-ebsa110/include/mach/uncompress.h delete mode 100644 arch/arm/mach-ebsa110/io.c delete mode 100644 arch/arm/mach-ebsa110/leds.c diff --git a/MAINTAINERS b/MAINTAINERS index e73636b75f29..12c6a9028ed2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1789,14 +1789,6 @@ F: drivers/firmware/turris-mox-rwtm.c F: drivers/gpio/gpio-moxtet.c F: include/linux/moxtet.h -ARM/EBSA110 MACHINE SUPPORT -M: Russell King -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained -W: http://www.armlinux.org.uk/ -F: arch/arm/mach-ebsa110/ -F: drivers/net/ethernet/amd/am79c961a.* - ARM/ENERGY MICRO (SILICON LABS) EFM32 SUPPORT M: Uwe Kleine-König R: Pengutronix Kernel Team diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index fe2f17eb2b50..31391147315d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -267,8 +267,7 @@ config PHYS_OFFSET hex "Physical address of main memory" if MMU depends on !ARM_PATCH_PHYS_VIRT default DRAM_BASE if !MMU - default 0x00000000 if ARCH_EBSA110 || \ - ARCH_FOOTBRIDGE + default 0x00000000 if ARCH_FOOTBRIDGE default 0x10000000 if ARCH_OMAP1 || ARCH_RPC default 0x20000000 if ARCH_S5PV210 default 0xc0000000 if ARCH_SA1100 @@ -342,20 +341,6 @@ config ARM_SINGLE_ARMV7M select SPARSE_IRQ select USE_OF -config ARCH_EBSA110 - bool "EBSA-110" - select ARCH_USES_GETTIMEOFFSET - select CPU_SA110 - select ISA - select NEED_MACH_IO_H - select NEED_MACH_MEMORY_H - select NO_IOPORT_MAP - help - This is an evaluation board for the StrongARM processor available - from Digital. It has limited hardware on-board, including an - Ethernet interface, two PCMCIA sockets, two serial ports and a - parallel port. - config ARCH_EP93XX bool "EP93xx-based" select ARCH_SPARSEMEM_ENABLE @@ -1371,7 +1356,6 @@ config ARCH_NR_GPIO config HZ_FIXED int - default 200 if ARCH_EBSA110 default 128 if SOC_AT91RM9200 default 0 @@ -1587,9 +1571,7 @@ config FORCE_MAX_ZONEORDER a value of 11 means that the largest free memory block is 2^10 pages. config ALIGNMENT_TRAP - bool - depends on CPU_CP15_MMU - default y if !ARCH_EBSA110 + def_bool CPU_CP15_MMU select HAVE_PROC_CPU if PROC_FS help ARM processors cannot fetch/store information which is not @@ -1784,7 +1766,7 @@ config CMDLINE string "Default kernel command string" default "" help - On some architectures (EBSA110 and CATS), there is currently no way + On some architectures (e.g. CATS), there is currently no way for the boot loader to pass arguments to the kernel. For these architectures, you should supply some command-line options at build time by entering them here. As a minimum, you should specify the diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 8986a91a6f31..4ff04201a8cc 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1567,7 +1567,7 @@ config DEBUG_SIRFSOC_UART config DEBUG_UART_FLOW_CONTROL bool "Enable flow control (CTS) for the debug UART" depends on DEBUG_LL - default y if ARCH_EBSA110 || DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC + default y if DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC help Some UART ports are connected to terminals that will use modem control signals to indicate whether they are ready to receive text. @@ -1639,7 +1639,7 @@ config DEBUG_UART_PL01X # Compatibility options for 8250 config DEBUG_UART_8250 - def_bool ARCH_EBSA110 || ARCH_IOP32X || ARCH_IXP4XX || ARCH_RPC + def_bool ARCH_IOP32X || ARCH_IXP4XX || ARCH_RPC config DEBUG_UART_PHYS hex "Physical base address of debug UART" @@ -1743,7 +1743,6 @@ config DEBUG_UART_PHYS default 0xe8008000 if DEBUG_R7S72100_SCIF2 || DEBUG_R7S9210_SCIF2 default 0xe8009000 if DEBUG_R7S9210_SCIF4 default 0xf0000000 if DEBUG_DIGICOLOR_UA0 - default 0xf0000be0 if ARCH_EBSA110 default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE default 0xf7fc9000 if DEBUG_BERLIN_UART @@ -1790,7 +1789,6 @@ config DEBUG_UART_VIRT default 0xc8821000 if DEBUG_RV1108_UART1 default 0xc8912000 if DEBUG_RV1108_UART0 default 0xe0010fe0 if ARCH_RPC - default 0xf0000be0 if ARCH_EBSA110 default 0xf0010000 if DEBUG_ASM9260_UART default 0xf0100000 if DEBUG_DIGICOLOR_UA0 default 0xf01fb000 if DEBUG_NOMADIK_UART diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 4d76eab2b22d..64999d94ed1b 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -172,7 +172,6 @@ machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx machine-$(CONFIG_ARCH_DAVINCI) += davinci machine-$(CONFIG_ARCH_DIGICOLOR) += digicolor machine-$(CONFIG_ARCH_DOVE) += dove -machine-$(CONFIG_ARCH_EBSA110) += ebsa110 machine-$(CONFIG_ARCH_EFM32) += efm32 machine-$(CONFIG_ARCH_EP93XX) += ep93xx machine-$(CONFIG_ARCH_EXYNOS) += exynos @@ -239,13 +238,6 @@ plat-$(CONFIG_PLAT_ORION) += orion plat-$(CONFIG_PLAT_PXA) += pxa plat-$(CONFIG_PLAT_VERSATILE) += versatile -ifeq ($(CONFIG_ARCH_EBSA110),y) -# This is what happens if you forget the IOCS16 line. -# PCMCIA cards stop working. -CFLAGS_3c589_cs.o :=-DISA_SIXTEEN_BIT_PERIPHERAL -export CFLAGS_3c589_cs.o -endif - # The byte offset of the kernel image in RAM from the start of RAM. TEXT_OFFSET := $(textofs-y) diff --git a/arch/arm/configs/ebsa110_defconfig b/arch/arm/configs/ebsa110_defconfig deleted file mode 100644 index 731a22a55f4e..000000000000 --- a/arch/arm/configs/ebsa110_defconfig +++ /dev/null @@ -1,74 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EXPERT=y -CONFIG_MODULES=y -CONFIG_ARCH_EBSA110=y -CONFIG_PCCARD=m -CONFIG_I82365=m -CONFIG_LEDS=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/nfs rw mem=16M console=ttyS1,38400n8" -CONFIG_FPE_NWFPE=y -CONFIG_FPE_FASTFPE=y -CONFIG_BINFMT_AOUT=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_SYN_COOKIES=y -CONFIG_IPV6=y -CONFIG_NETFILTER=y -CONFIG_IP_NF_IPTABLES=y -CONFIG_IP_NF_MATCH_ECN=y -CONFIG_IP_NF_MATCH_TTL=y -CONFIG_IP_NF_FILTER=y -CONFIG_IP_NF_TARGET_REJECT=y -CONFIG_IP_NF_TARGET_LOG=y -CONFIG_IP_NF_MANGLE=y -CONFIG_IP_NF_TARGET_ECN=y -CONFIG_IP6_NF_IPTABLES=y -CONFIG_IP6_NF_MATCH_FRAG=y -CONFIG_IP6_NF_MATCH_OPTS=y -CONFIG_IP6_NF_MATCH_HL=y -CONFIG_IP6_NF_MATCH_RT=y -CONFIG_IP6_NF_FILTER=y -CONFIG_IP6_NF_MANGLE=y -CONFIG_FW_LOADER=m -CONFIG_PARPORT=y -CONFIG_PARPORT_PC=y -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_1284=y -CONFIG_BLK_DEV_RAM=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AM79C961A=y -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_PCNET=m -CONFIG_PPP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_CS=m -CONFIG_PRINTER=m -CONFIG_WATCHDOG=y -CONFIG_SOFT_WATCHDOG=y -CONFIG_AUTOFS4_FS=y -CONFIG_MINIX_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -# CONFIG_MSDOS_PARTITION is not set diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 89e5d864e923..09e67cb02b20 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -17,7 +17,7 @@ CFLAGS_REMOVE_return_address.o = -pg # Object file lists. obj-y := elf.o entry-common.o irq.o opcodes.o \ - process.o ptrace.o reboot.o \ + process.o ptrace.o reboot.o io.o \ setup.o signal.o sigreturn_codes.o \ stacktrace.o sys_arm.o time.o traps.o @@ -83,10 +83,6 @@ AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o obj-$(CONFIG_VDSO) += vdso.o obj-$(CONFIG_EFI) += efi.o - -ifneq ($(CONFIG_ARCH_EBSA110),y) - obj-y += io.o -endif obj-$(CONFIG_PARAVIRT) += paravirt.o head-y := head$(MMUEXT).o diff --git a/arch/arm/mach-ebsa110/Makefile b/arch/arm/mach-ebsa110/Makefile deleted file mode 100644 index 296541315d25..000000000000 --- a/arch/arm/mach-ebsa110/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Makefile for the linux kernel. -# - -# Object file lists. - -obj-y := core.o io.o leds.o diff --git a/arch/arm/mach-ebsa110/Makefile.boot b/arch/arm/mach-ebsa110/Makefile.boot deleted file mode 100644 index e7e98937c71b..000000000000 --- a/arch/arm/mach-ebsa110/Makefile.boot +++ /dev/null @@ -1,5 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - zreladdr-y += 0x00008000 -params_phys-y := 0x00000400 -initrd_phys-y := 0x00800000 - diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c deleted file mode 100644 index 5960e3dfd2bf..000000000000 --- a/arch/arm/mach-ebsa110/core.c +++ /dev/null @@ -1,323 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-ebsa110/core.c - * - * Copyright (C) 1998-2001 Russell King - * - * Extra MM routines for the EBSA-110 architecture - */ -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -#include "core.h" - -static void ebsa110_mask_irq(struct irq_data *d) -{ - __raw_writeb(1 << d->irq, IRQ_MCLR); -} - -static void ebsa110_unmask_irq(struct irq_data *d) -{ - __raw_writeb(1 << d->irq, IRQ_MSET); -} - -static struct irq_chip ebsa110_irq_chip = { - .irq_ack = ebsa110_mask_irq, - .irq_mask = ebsa110_mask_irq, - .irq_unmask = ebsa110_unmask_irq, -}; - -static void __init ebsa110_init_irq(void) -{ - unsigned long flags; - unsigned int irq; - - local_irq_save(flags); - __raw_writeb(0xff, IRQ_MCLR); - __raw_writeb(0x55, IRQ_MSET); - __raw_writeb(0x00, IRQ_MSET); - if (__raw_readb(IRQ_MASK) != 0x55) - while (1); - __raw_writeb(0xff, IRQ_MCLR); /* clear all interrupt enables */ - local_irq_restore(flags); - - for (irq = 0; irq < NR_IRQS; irq++) { - irq_set_chip_and_handler(irq, &ebsa110_irq_chip, - handle_level_irq); - irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); - } -} - -static struct map_desc ebsa110_io_desc[] __initdata = { - /* - * sparse external-decode ISAIO space - */ - { /* IRQ_STAT/IRQ_MCLR */ - .virtual = (unsigned long)IRQ_STAT, - .pfn = __phys_to_pfn(TRICK4_PHYS), - .length = TRICK4_SIZE, - .type = MT_DEVICE - }, { /* IRQ_MASK/IRQ_MSET */ - .virtual = (unsigned long)IRQ_MASK, - .pfn = __phys_to_pfn(TRICK3_PHYS), - .length = TRICK3_SIZE, - .type = MT_DEVICE - }, { /* SOFT_BASE */ - .virtual = (unsigned long)SOFT_BASE, - .pfn = __phys_to_pfn(TRICK1_PHYS), - .length = TRICK1_SIZE, - .type = MT_DEVICE - }, { /* PIT_BASE */ - .virtual = (unsigned long)PIT_BASE, - .pfn = __phys_to_pfn(TRICK0_PHYS), - .length = TRICK0_SIZE, - .type = MT_DEVICE - }, - - /* - * self-decode ISAIO space - */ - { - .virtual = ISAIO_BASE, - .pfn = __phys_to_pfn(ISAIO_PHYS), - .length = ISAIO_SIZE, - .type = MT_DEVICE - }, { - .virtual = ISAMEM_BASE, - .pfn = __phys_to_pfn(ISAMEM_PHYS), - .length = ISAMEM_SIZE, - .type = MT_DEVICE - } -}; - -static void __init ebsa110_map_io(void) -{ - iotable_init(ebsa110_io_desc, ARRAY_SIZE(ebsa110_io_desc)); -} - -static void __iomem *ebsa110_ioremap_caller(phys_addr_t cookie, size_t size, - unsigned int flags, void *caller) -{ - return (void __iomem *)cookie; -} - -static void ebsa110_iounmap(volatile void __iomem *io_addr) -{} - -static void __init ebsa110_init_early(void) -{ - arch_ioremap_caller = ebsa110_ioremap_caller; - arch_iounmap = ebsa110_iounmap; -} - -#define PIT_CTRL (PIT_BASE + 0x0d) -#define PIT_T2 (PIT_BASE + 0x09) -#define PIT_T1 (PIT_BASE + 0x05) -#define PIT_T0 (PIT_BASE + 0x01) - -/* - * This is the rate at which your MCLK signal toggles (in Hz) - * This was measured on a 10 digit frequency counter sampling - * over 1 second. - */ -#define MCLK 47894000 - -/* - * This is the rate at which the PIT timers get clocked - */ -#define CLKBY7 (MCLK / 7) - -/* - * This is the counter value. We tick at 200Hz on this platform. - */ -#define COUNT ((CLKBY7 + (HZ / 2)) / HZ) - -/* - * Get the time offset from the system PIT. Note that if we have missed an - * interrupt, then the PIT counter will roll over (ie, be negative). - * This actually works out to be convenient. - */ -static u32 ebsa110_gettimeoffset(void) -{ - unsigned long offset, count; - - __raw_writeb(0x40, PIT_CTRL); - count = __raw_readb(PIT_T1); - count |= __raw_readb(PIT_T1) << 8; - - /* - * If count > COUNT, make the number negative. - */ - if (count > COUNT) - count |= 0xffff0000; - - offset = COUNT; - offset -= count; - - /* - * `offset' is in units of timer counts. Convert - * offset to units of microseconds. - */ - offset = offset * (1000000 / HZ) / COUNT; - - return offset * 1000; -} - -static irqreturn_t -ebsa110_timer_interrupt(int irq, void *dev_id) -{ - u32 count; - - /* latch and read timer 1 */ - __raw_writeb(0x40, PIT_CTRL); - count = __raw_readb(PIT_T1); - count |= __raw_readb(PIT_T1) << 8; - - count += COUNT; - - __raw_writeb(count & 0xff, PIT_T1); - __raw_writeb(count >> 8, PIT_T1); - - timer_tick(); - - return IRQ_HANDLED; -} - -/* - * Set up timer interrupt. - */ -void __init ebsa110_timer_init(void) -{ - int irq = IRQ_EBSA110_TIMER0; - - arch_gettimeoffset = ebsa110_gettimeoffset; - - /* - * Timer 1, mode 2, LSB/MSB - */ - __raw_writeb(0x70, PIT_CTRL); - __raw_writeb(COUNT & 0xff, PIT_T1); - __raw_writeb(COUNT >> 8, PIT_T1); - - if (request_irq(irq, ebsa110_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL, - "EBSA110 Timer Tick", NULL)) - pr_err("Failed to request irq %d (EBSA110 Timer Tick)\n", irq); -} - -static struct plat_serial8250_port serial_platform_data[] = { - { - .iobase = 0x3f8, - .irq = 1, - .uartclk = 1843200, - .regshift = 0, - .iotype = UPIO_PORT, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - }, - { - .iobase = 0x2f8, - .irq = 2, - .uartclk = 1843200, - .regshift = 0, - .iotype = UPIO_PORT, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - }, - { }, -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data, - }, -}; - -static struct resource am79c961_resources[] = { - { - .start = 0x220, - .end = 0x238, - .flags = IORESOURCE_IO, - }, { - .start = IRQ_EBSA110_ETHERNET, - .end = IRQ_EBSA110_ETHERNET, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device am79c961_device = { - .name = "am79c961", - .id = -1, - .num_resources = ARRAY_SIZE(am79c961_resources), - .resource = am79c961_resources, -}; - -static struct platform_device *ebsa110_devices[] = { - &serial_device, - &am79c961_device, -}; - -/* - * EBSA110 idling methodology: - * - * We can not execute the "wait for interrupt" instruction since that - * will stop our MCLK signal (which provides the clock for the glue - * logic, and therefore the timer interrupt). - * - * Instead, we spin, polling the IRQ_STAT register for the occurrence - * of any interrupt with core clock down to the memory clock. - */ -static void ebsa110_idle(void) -{ - const char *irq_stat = (char *)0xff000000; - - /* disable clock switching */ - asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc"); - - /* wait for an interrupt to occur */ - while (!*irq_stat); - - /* enable clock switching */ - asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc"); -} - -static int __init ebsa110_init(void) -{ - arm_pm_idle = ebsa110_idle; - return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices)); -} - -arch_initcall(ebsa110_init); - -static void ebsa110_restart(enum reboot_mode mode, const char *cmd) -{ - soft_restart(0x80000000); -} - -MACHINE_START(EBSA110, "EBSA110") - /* Maintainer: Russell King */ - .atag_offset = 0x400, - .reserve_lp0 = 1, - .reserve_lp2 = 1, - .map_io = ebsa110_map_io, - .init_early = ebsa110_init_early, - .init_irq = ebsa110_init_irq, - .init_time = ebsa110_timer_init, - .restart = ebsa110_restart, -MACHINE_END diff --git a/arch/arm/mach-ebsa110/core.h b/arch/arm/mach-ebsa110/core.h deleted file mode 100644 index 47acc610b6b4..000000000000 --- a/arch/arm/mach-ebsa110/core.h +++ /dev/null @@ -1,38 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 1996-2000 Russell King. - * - * This file contains the core hardware definitions of the EBSA-110. - */ -#ifndef CORE_H -#define CORE_H - -/* Physical addresses/sizes */ -#define ISAMEM_PHYS 0xe0000000 -#define ISAMEM_SIZE 0x10000000 - -#define ISAIO_PHYS 0xf0000000 -#define ISAIO_SIZE PGDIR_SIZE - -#define TRICK0_PHYS 0xf2000000 -#define TRICK0_SIZE PGDIR_SIZE -#define TRICK1_PHYS 0xf2400000 -#define TRICK1_SIZE PGDIR_SIZE -#define TRICK2_PHYS 0xf2800000 -#define TRICK3_PHYS 0xf2c00000 -#define TRICK3_SIZE PGDIR_SIZE -#define TRICK4_PHYS 0xf3000000 -#define TRICK4_SIZE PGDIR_SIZE -#define TRICK5_PHYS 0xf3400000 -#define TRICK6_PHYS 0xf3800000 -#define TRICK7_PHYS 0xf3c00000 - -/* Virtual addresses */ -#define PIT_BASE IOMEM(0xfc000000) /* trick 0 */ -#define SOFT_BASE IOMEM(0xfd000000) /* trick 1 */ -#define IRQ_MASK IOMEM(0xfe000000) /* trick 3 - read */ -#define IRQ_MSET IOMEM(0xfe000000) /* trick 3 - write */ -#define IRQ_STAT IOMEM(0xff000000) /* trick 4 - read */ -#define IRQ_MCLR IOMEM(0xff000000) /* trick 4 - write */ - -#endif diff --git a/arch/arm/mach-ebsa110/include/mach/entry-macro.S b/arch/arm/mach-ebsa110/include/mach/entry-macro.S deleted file mode 100644 index 14b110de78a9..000000000000 --- a/arch/arm/mach-ebsa110/include/mach/entry-macro.S +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-ebsa110/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for ebsa110 platform. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - - - -#define IRQ_STAT 0xff000000 /* read */ - - .macro get_irqnr_preamble, base, tmp - mov \base, #IRQ_STAT - .endm - - .macro get_irqnr_and_base, irqnr, stat, base, tmp - ldrb \stat, [\base] @ get interrupts - mov \irqnr, #0 - tst \stat, #15 - addeq \irqnr, \irqnr, #4 - moveq \stat, \stat, lsr #4 - tst \stat, #3 - addeq \irqnr, \irqnr, #2 - moveq \stat, \stat, lsr #2 - tst \stat, #1 - addeq \irqnr, \irqnr, #1 - moveq \stat, \stat, lsr #1 - tst \stat, #1 @ bit 0 should be set - .endm - diff --git a/arch/arm/mach-ebsa110/include/mach/hardware.h b/arch/arm/mach-ebsa110/include/mach/hardware.h deleted file mode 100644 index 81f6967683f6..000000000000 --- a/arch/arm/mach-ebsa110/include/mach/hardware.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-ebsa110/include/mach/hardware.h - * - * Copyright (C) 1996-2000 Russell King. - * - * This file contains the hardware definitions of the EBSA-110. - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#define ISAMEM_BASE 0xe0000000 -#define ISAIO_BASE 0xf0000000 - -/* - * RAM definitions - */ -#define UNCACHEABLE_ADDR 0xff000000 /* IRQ_STAT */ - -#endif - diff --git a/arch/arm/mach-ebsa110/include/mach/io.h b/arch/arm/mach-ebsa110/include/mach/io.h deleted file mode 100644 index ad170886c9aa..000000000000 --- a/arch/arm/mach-ebsa110/include/mach/io.h +++ /dev/null @@ -1,89 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-ebsa110/include/mach/io.h - * - * Copyright (C) 1997,1998 Russell King - * - * Modifications: - * 06-Dec-1997 RMK Created. - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -u8 __inb8(unsigned int port); -void __outb8(u8 val, unsigned int port); - -u8 __inb16(unsigned int port); -void __outb16(u8 val, unsigned int port); - -u16 __inw(unsigned int port); -void __outw(u16 val, unsigned int port); - -u32 __inl(unsigned int port); -void __outl(u32 val, unsigned int port); - -u8 __readb(const volatile void __iomem *addr); -u16 __readw(const volatile void __iomem *addr); -u32 __readl(const volatile void __iomem *addr); - -void __writeb(u8 val, volatile void __iomem *addr); -void __writew(u16 val, volatile void __iomem *addr); -void __writel(u32 val, volatile void __iomem *addr); - -/* - * Argh, someone forgot the IOCS16 line. We therefore have to handle - * the byte stearing by selecting the correct byte IO functions here. - */ -#ifdef ISA_SIXTEEN_BIT_PERIPHERAL -#define inb(p) __inb16(p) -#define outb(v,p) __outb16(v,p) -#else -#define inb(p) __inb8(p) -#define outb(v,p) __outb8(v,p) -#endif - -#define inw(p) __inw(p) -#define outw(v,p) __outw(v,p) - -#define inl(p) __inl(p) -#define outl(v,p) __outl(v,p) - -#define readb(b) __readb(b) -#define readw(b) __readw(b) -#define readl(b) __readl(b) -#define readb_relaxed(addr) readb(addr) -#define readw_relaxed(addr) readw(addr) -#define readl_relaxed(addr) readl(addr) - -#define writeb(v,b) __writeb(v,b) -#define writew(v,b) __writew(v,b) -#define writel(v,b) __writel(v,b) - -#define insb insb -extern void insb(unsigned int port, void *buf, int sz); -#define insw insw -extern void insw(unsigned int port, void *buf, int sz); -#define insl insl -extern void insl(unsigned int port, void *buf, int sz); - -#define outsb outsb -extern void outsb(unsigned int port, const void *buf, int sz); -#define outsw outsw -extern void outsw(unsigned int port, const void *buf, int sz); -#define outsl outsl -extern void outsl(unsigned int port, const void *buf, int sz); - -/* can't support writesb atm */ -#define writesw writesw -extern void writesw(volatile void __iomem *addr, const void *data, int wordlen); -#define writesl writesl -extern void writesl(volatile void __iomem *addr, const void *data, int longlen); - -/* can't support readsb atm */ -#define readsw readsw -extern void readsw(const volatile void __iomem *addr, void *data, int wordlen); - -#define readsl readsl -extern void readsl(const volatile void __iomem *addr, void *data, int longlen); - -#endif diff --git a/arch/arm/mach-ebsa110/include/mach/irqs.h b/arch/arm/mach-ebsa110/include/mach/irqs.h deleted file mode 100644 index 29a8671fe849..000000000000 --- a/arch/arm/mach-ebsa110/include/mach/irqs.h +++ /dev/null @@ -1,17 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-ebsa110/include/mach/irqs.h - * - * Copyright (C) 1996 Russell King - */ - -#define NR_IRQS 8 - -#define IRQ_EBSA110_PRINTER 0 -#define IRQ_EBSA110_COM1 1 -#define IRQ_EBSA110_COM2 2 -#define IRQ_EBSA110_ETHERNET 3 -#define IRQ_EBSA110_TIMER0 4 -#define IRQ_EBSA110_TIMER1 5 -#define IRQ_EBSA110_PCMCIA 6 -#define IRQ_EBSA110_IMMEDIATE 7 diff --git a/arch/arm/mach-ebsa110/include/mach/memory.h b/arch/arm/mach-ebsa110/include/mach/memory.h deleted file mode 100644 index f025f405de50..000000000000 --- a/arch/arm/mach-ebsa110/include/mach/memory.h +++ /dev/null @@ -1,22 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-ebsa110/include/mach/memory.h - * - * Copyright (C) 1996-1999 Russell King. - * - * Changelog: - * 20-Oct-1996 RMK Created - * 31-Dec-1997 RMK Fixed definitions to reduce warnings - * 21-Mar-1999 RMK Renamed to memory.h - * RMK Moved TASK_SIZE and PAGE_OFFSET here - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Cache flushing area - SRAM - */ -#define FLUSH_BASE_PHYS 0x40000000 -#define FLUSH_BASE 0xdf000000 - -#endif diff --git a/arch/arm/mach-ebsa110/include/mach/uncompress.h b/arch/arm/mach-ebsa110/include/mach/uncompress.h deleted file mode 100644 index 3ec12efe98a6..000000000000 --- a/arch/arm/mach-ebsa110/include/mach/uncompress.h +++ /dev/null @@ -1,41 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-ebsa110/include/mach/uncompress.h - * - * Copyright (C) 1996,1997,1998 Russell King - */ - -#include - -#define SERIAL_BASE ((unsigned char *)0xf0000be0) - -/* - * This does not append a newline - */ -static inline void putc(int c) -{ - unsigned char v, *base = SERIAL_BASE; - - do { - v = base[UART_LSR << 2]; - barrier(); - } while (!(v & UART_LSR_THRE)); - - base[UART_TX << 2] = c; -} - -static inline void flush(void) -{ - unsigned char v, *base = SERIAL_BASE; - - do { - v = base[UART_LSR << 2]; - barrier(); - } while ((v & (UART_LSR_TEMT|UART_LSR_THRE)) != - (UART_LSR_TEMT|UART_LSR_THRE)); -} - -/* - * nothing to do - */ -#define arch_decomp_setup() diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c deleted file mode 100644 index 3c44dd3596ea..000000000000 --- a/arch/arm/mach-ebsa110/io.c +++ /dev/null @@ -1,440 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * linux/arch/arm/mach-ebsa110/isamem.c - * - * Copyright (C) 2001 Russell King - * - * Perform "ISA" memory and IO accesses. The EBSA110 has some "peculiarities" - * in the way it handles accesses to odd IO ports on 16-bit devices. These - * devices have their D0-D15 lines connected to the processors D0-D15 lines. - * Since they expect all byte IO operations to be performed on D0-D7, and the - * StrongARM expects to transfer the byte to these odd addresses on D8-D15, - * we must use a trick to get the required behaviour. - * - * The trick employed here is to use long word stores to odd address -1. The - * glue logic picks this up as a "trick" access, and asserts the LSB of the - * peripherals address bus, thereby accessing the odd IO port. Meanwhile, the - * StrongARM transfers its data on D0-D7 as expected. - * - * Things get more interesting on the pass-1 EBSA110 - the PCMCIA controller - * wiring was screwed in such a way that it had limited memory space access. - * Luckily, the work-around for this is not too horrible. See - * __isamem_convert_addr for the details. - */ -#include -#include -#include -#include - -#include -#include - -static void __iomem *__isamem_convert_addr(const volatile void __iomem *addr) -{ - u32 ret, a = (u32 __force) addr; - - /* - * The PCMCIA controller is wired up as follows: - * +---------+---------+---------+---------+---------+---------+ - * PCMCIA | 2 2 2 2 | 1 1 1 1 | 1 1 1 1 | 1 1 | | | - * | 3 2 1 0 | 9 8 7 6 | 5 4 3 2 | 1 0 9 8 | 7 6 5 4 | 3 2 1 0 | - * +---------+---------+---------+---------+---------+---------+ - * CPU | 2 2 2 2 | 2 1 1 1 | 1 1 1 1 | 1 1 1 | | | - * | 4 3 2 1 | 0 9 9 8 | 7 6 5 4 | 3 2 0 9 | 8 7 6 5 | 4 3 2 x | - * +---------+---------+---------+---------+---------+---------+ - * - * This means that we can access PCMCIA regions as follows: - * 0x*10000 -> 0x*1ffff - * 0x*70000 -> 0x*7ffff - * 0x*90000 -> 0x*9ffff - * 0x*f0000 -> 0x*fffff - */ - ret = (a & 0xf803fe) << 1; - ret |= (a & 0x03fc00) << 2; - - ret += 0xe8000000; - - if ((a & 0x20000) == (a & 0x40000) >> 1) - return (void __iomem *)ret; - - BUG(); - return NULL; -} - -/* - * read[bwl] and write[bwl] - */ -u8 __readb(const volatile void __iomem *addr) -{ - void __iomem *a = __isamem_convert_addr(addr); - u32 ret; - - if ((unsigned long)addr & 1) - ret = __raw_readl(a); - else - ret = __raw_readb(a); - return ret; -} - -u16 __readw(const volatile void __iomem *addr) -{ - void __iomem *a = __isamem_convert_addr(addr); - - if ((unsigned long)addr & 1) - BUG(); - - return __raw_readw(a); -} - -u32 __readl(const volatile void __iomem *addr) -{ - void __iomem *a = __isamem_convert_addr(addr); - u32 ret; - - if ((unsigned long)addr & 3) - BUG(); - - ret = __raw_readw(a); - ret |= __raw_readw(a + 4) << 16; - return ret; -} - -EXPORT_SYMBOL(__readb); -EXPORT_SYMBOL(__readw); -EXPORT_SYMBOL(__readl); - -void readsw(const volatile void __iomem *addr, void *data, int len) -{ - void __iomem *a = __isamem_convert_addr(addr); - - BUG_ON((unsigned long)addr & 1); - - __raw_readsw(a, data, len); -} -EXPORT_SYMBOL(readsw); - -void readsl(const volatile void __iomem *addr, void *data, int len) -{ - void __iomem *a = __isamem_convert_addr(addr); - - BUG_ON((unsigned long)addr & 3); - - __raw_readsl(a, data, len); -} -EXPORT_SYMBOL(readsl); - -void __writeb(u8 val, volatile void __iomem *addr) -{ - void __iomem *a = __isamem_convert_addr(addr); - - if ((unsigned long)addr & 1) - __raw_writel(val, a); - else - __raw_writeb(val, a); -} - -void __writew(u16 val, volatile void __iomem *addr) -{ - void __iomem *a = __isamem_convert_addr(addr); - - if ((unsigned long)addr & 1) - BUG(); - - __raw_writew(val, a); -} - -void __writel(u32 val, volatile void __iomem *addr) -{ - void __iomem *a = __isamem_convert_addr(addr); - - if ((unsigned long)addr & 3) - BUG(); - - __raw_writew(val, a); - __raw_writew(val >> 16, a + 4); -} - -EXPORT_SYMBOL(__writeb); -EXPORT_SYMBOL(__writew); -EXPORT_SYMBOL(__writel); - -void writesw(volatile void __iomem *addr, const void *data, int len) -{ - void __iomem *a = __isamem_convert_addr(addr); - - BUG_ON((unsigned long)addr & 1); - - __raw_writesw(a, data, len); -} -EXPORT_SYMBOL(writesw); - -void writesl(volatile void __iomem *addr, const void *data, int len) -{ - void __iomem *a = __isamem_convert_addr(addr); - - BUG_ON((unsigned long)addr & 3); - - __raw_writesl(a, data, len); -} -EXPORT_SYMBOL(writesl); - -/* - * The EBSA110 has a weird "ISA IO" region: - * - * Region 0 (addr = 0xf0000000 + io << 2) - * -------------------------------------------------------- - * Physical region IO region - * f0000fe0 - f0000ffc 3f8 - 3ff ttyS0 - * f0000e60 - f0000e64 398 - 399 - * f0000de0 - f0000dfc 378 - 37f lp0 - * f0000be0 - f0000bfc 2f8 - 2ff ttyS1 - * - * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1)) - * -------------------------------------------------------- - * Physical region IO region - * f00014f1 a79 pnp write data - * f00007c0 - f00007c1 3e0 - 3e1 pcmcia - * f00004f1 279 pnp address - * f0000440 - f000046c 220 - 236 eth0 - * f0000405 203 pnp read data - */ -#define SUPERIO_PORT(p) \ - (((p) >> 3) == (0x3f8 >> 3) || \ - ((p) >> 3) == (0x2f8 >> 3) || \ - ((p) >> 3) == (0x378 >> 3)) - -/* - * We're addressing an 8 or 16-bit peripheral which tranfers - * odd addresses on the low ISA byte lane. - */ -u8 __inb8(unsigned int port) -{ - u32 ret; - - /* - * The SuperIO registers use sane addressing techniques... - */ - if (SUPERIO_PORT(port)) - ret = __raw_readb((void __iomem *)ISAIO_BASE + (port << 2)); - else { - void __iomem *a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1); - - /* - * Shame nothing else does - */ - if (port & 1) - ret = __raw_readl(a); - else - ret = __raw_readb(a); - } - return ret; -} - -/* - * We're addressing a 16-bit peripheral which transfers odd - * addresses on the high ISA byte lane. - */ -u8 __inb16(unsigned int port) -{ - unsigned int offset; - - /* - * The SuperIO registers use sane addressing techniques... - */ - if (SUPERIO_PORT(port)) - offset = port << 2; - else - offset = (port & ~1) << 1 | (port & 1); - - return __raw_readb((void __iomem *)ISAIO_BASE + offset); -} - -u16 __inw(unsigned int port) -{ - unsigned int offset; - - /* - * The SuperIO registers use sane addressing techniques... - */ - if (SUPERIO_PORT(port)) - offset = port << 2; - else { - offset = port << 1; - BUG_ON(port & 1); - } - return __raw_readw((void __iomem *)ISAIO_BASE + offset); -} - -/* - * Fake a 32-bit read with two 16-bit reads. Needed for 3c589. - */ -u32 __inl(unsigned int port) -{ - void __iomem *a; - - if (SUPERIO_PORT(port) || port & 3) - BUG(); - - a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1); - - return __raw_readw(a) | __raw_readw(a + 4) << 16; -} - -EXPORT_SYMBOL(__inb8); -EXPORT_SYMBOL(__inb16); -EXPORT_SYMBOL(__inw); -EXPORT_SYMBOL(__inl); - -void __outb8(u8 val, unsigned int port) -{ - /* - * The SuperIO registers use sane addressing techniques... - */ - if (SUPERIO_PORT(port)) - __raw_writeb(val, (void __iomem *)ISAIO_BASE + (port << 2)); - else { - void __iomem *a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1); - - /* - * Shame nothing else does - */ - if (port & 1) - __raw_writel(val, a); - else - __raw_writeb(val, a); - } -} - -void __outb16(u8 val, unsigned int port) -{ - unsigned int offset; - - /* - * The SuperIO registers use sane addressing techniques... - */ - if (SUPERIO_PORT(port)) - offset = port << 2; - else - offset = (port & ~1) << 1 | (port & 1); - - __raw_writeb(val, (void __iomem *)ISAIO_BASE + offset); -} - -void __outw(u16 val, unsigned int port) -{ - unsigned int offset; - - /* - * The SuperIO registers use sane addressing techniques... - */ - if (SUPERIO_PORT(port)) - offset = port << 2; - else { - offset = port << 1; - BUG_ON(port & 1); - } - __raw_writew(val, (void __iomem *)ISAIO_BASE + offset); -} - -void __outl(u32 val, unsigned int port) -{ - BUG(); -} - -EXPORT_SYMBOL(__outb8); -EXPORT_SYMBOL(__outb16); -EXPORT_SYMBOL(__outw); -EXPORT_SYMBOL(__outl); - -void outsb(unsigned int port, const void *from, int len) -{ - u32 off; - - if (SUPERIO_PORT(port)) - off = port << 2; - else { - off = (port & ~1) << 1; - if (port & 1) - BUG(); - } - - __raw_writesb((void __iomem *)ISAIO_BASE + off, from, len); -} - -void insb(unsigned int port, void *from, int len) -{ - u32 off; - - if (SUPERIO_PORT(port)) - off = port << 2; - else { - off = (port & ~1) << 1; - if (port & 1) - BUG(); - } - - __raw_readsb((void __iomem *)ISAIO_BASE + off, from, len); -} - -EXPORT_SYMBOL(outsb); -EXPORT_SYMBOL(insb); - -void outsw(unsigned int port, const void *from, int len) -{ - u32 off; - - if (SUPERIO_PORT(port)) - off = port << 2; - else { - off = (port & ~1) << 1; - if (port & 1) - BUG(); - } - - __raw_writesw((void __iomem *)ISAIO_BASE + off, from, len); -} - -void insw(unsigned int port, void *from, int len) -{ - u32 off; - - if (SUPERIO_PORT(port)) - off = port << 2; - else { - off = (port & ~1) << 1; - if (port & 1) - BUG(); - } - - __raw_readsw((void __iomem *)ISAIO_BASE + off, from, len); -} - -EXPORT_SYMBOL(outsw); -EXPORT_SYMBOL(insw); - -/* - * We implement these as 16-bit insw/outsw, mainly for - * 3c589 cards. - */ -void outsl(unsigned int port, const void *from, int len) -{ - u32 off = port << 1; - - if (SUPERIO_PORT(port) || port & 3) - BUG(); - - __raw_writesw((void __iomem *)ISAIO_BASE + off, from, len << 1); -} - -void insl(unsigned int port, void *from, int len) -{ - u32 off = port << 1; - - if (SUPERIO_PORT(port) || port & 3) - BUG(); - - __raw_readsw((void __iomem *)ISAIO_BASE + off, from, len << 1); -} - -EXPORT_SYMBOL(outsl); -EXPORT_SYMBOL(insl); diff --git a/arch/arm/mach-ebsa110/leds.c b/arch/arm/mach-ebsa110/leds.c deleted file mode 100644 index fd1474b66d31..000000000000 --- a/arch/arm/mach-ebsa110/leds.c +++ /dev/null @@ -1,71 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Driver for the LED found on the EBSA110 machine - * Based on Versatile and RealView machine LED code - * - * Author: Bryan Wu - */ -#include -#include -#include -#include -#include - -#include - -#include "core.h" - -#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS) -static void ebsa110_led_set(struct led_classdev *cdev, - enum led_brightness b) -{ - u8 reg = __raw_readb(SOFT_BASE); - - if (b != LED_OFF) - reg |= 0x80; - else - reg &= ~0x80; - - __raw_writeb(reg, SOFT_BASE); -} - -static enum led_brightness ebsa110_led_get(struct led_classdev *cdev) -{ - u8 reg = __raw_readb(SOFT_BASE); - - return (reg & 0x80) ? LED_FULL : LED_OFF; -} - -static int __init ebsa110_leds_init(void) -{ - - struct led_classdev *cdev; - int ret; - - if (!machine_is_ebsa110()) - return -ENODEV; - - cdev = kzalloc(sizeof(*cdev), GFP_KERNEL); - if (!cdev) - return -ENOMEM; - - cdev->name = "ebsa110:0"; - cdev->brightness_set = ebsa110_led_set; - cdev->brightness_get = ebsa110_led_get; - cdev->default_trigger = "heartbeat"; - - ret = led_classdev_register(NULL, cdev); - if (ret < 0) { - kfree(cdev); - return ret; - } - - return 0; -} - -/* - * Since we may have triggers on any subsystem, defer registration - * until after subsystem_init. - */ -fs_initcall(ebsa110_leds_init); -#endif diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index fd7968635e6d..f22e37337030 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -599,7 +599,7 @@ config K3_RTI_WATCHDOG config ORION_WATCHDOG tristate "Orion watchdog" - depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU || (COMPILE_TEST && !ARCH_EBSA110) + depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU || COMPILE_TEST depends on ARM select WATCHDOG_CORE help -- cgit v1.2.3 From 0d9dc7459a82f0ddd7907cd9fc0f6cc032c058da Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 24 Sep 2020 20:24:25 +0200 Subject: net: remove am79c961a driver This driver was only used on the EBSA110 platform, which is now getting removed, so the driver is no longer needed either. Acked-by: Russell King Acked-by: Jakub Kicinski Signed-off-by: Arnd Bergmann --- drivers/net/ethernet/amd/Kconfig | 10 +- drivers/net/ethernet/amd/Makefile | 1 - drivers/net/ethernet/amd/am79c961a.c | 763 ----------------------------------- drivers/net/ethernet/amd/am79c961a.h | 143 ------- 4 files changed, 1 insertion(+), 916 deletions(-) delete mode 100644 drivers/net/ethernet/amd/am79c961a.c delete mode 100644 drivers/net/ethernet/amd/am79c961a.h diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig index db7d956a9c9b..d0b0609bbe23 100644 --- a/drivers/net/ethernet/amd/Kconfig +++ b/drivers/net/ethernet/amd/Kconfig @@ -8,7 +8,7 @@ config NET_VENDOR_AMD default y depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \ SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \ - (ARM && ARCH_EBSA110) || ISA || EISA || PCMCIA || ARM64 + ISA || EISA || PCMCIA || ARM64 help If you have a network (Ethernet) chipset belonging to this class, say Y. @@ -75,14 +75,6 @@ config ARIADNE To compile this driver as a module, choose M here: the module will be called ariadne. -config ARM_AM79C961A - bool "ARM EBSA110 AM79C961A support" - depends on ARM && ARCH_EBSA110 - select CRC32 - help - If you wish to compile a kernel for the EBSA-110, then you should - always answer Y to this. - config ATARILANCE tristate "Atari LANCE support" depends on ATARI diff --git a/drivers/net/ethernet/amd/Makefile b/drivers/net/ethernet/amd/Makefile index 45f86822a5f7..0d2f478b49a5 100644 --- a/drivers/net/ethernet/amd/Makefile +++ b/drivers/net/ethernet/amd/Makefile @@ -5,7 +5,6 @@ obj-$(CONFIG_A2065) += a2065.o obj-$(CONFIG_AMD8111_ETH) += amd8111e.o -obj-$(CONFIG_ARM_AM79C961A) += am79c961a.o obj-$(CONFIG_ARIADNE) += ariadne.o obj-$(CONFIG_ATARILANCE) += atarilance.o obj-$(CONFIG_DECLANCE) += declance.o diff --git a/drivers/net/ethernet/amd/am79c961a.c b/drivers/net/ethernet/amd/am79c961a.c deleted file mode 100644 index 1c53408f5d47..000000000000 --- a/drivers/net/ethernet/amd/am79c961a.c +++ /dev/null @@ -1,763 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/drivers/net/ethernet/amd/am79c961a.c - * - * by Russell King 1995-2001. - * - * Derived from various things including skeleton.c - * - * This is a special driver for the am79c961A Lance chip used in the - * Intel (formally Digital Equipment Corp) EBSA110 platform. Please - * note that this can not be built as a module (it doesn't make sense). - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#define TX_BUFFERS 15 -#define RX_BUFFERS 25 - -#include "am79c961a.h" - -static irqreturn_t -am79c961_interrupt (int irq, void *dev_id); - -static unsigned int net_debug = NET_DEBUG; - -static const char version[] = - "am79c961 ethernet driver (C) 1995-2001 Russell King v0.04\n"; - -/* --------------------------------------------------------------------------- */ - -#ifdef __arm__ -static void write_rreg(u_long base, u_int reg, u_int val) -{ - asm volatile( - "strh %1, [%2] @ NET_RAP\n\t" - "strh %0, [%2, #-4] @ NET_RDP" - : - : "r" (val), "r" (reg), "r" (ISAIO_BASE + 0x0464)); -} - -static inline unsigned short read_rreg(u_long base_addr, u_int reg) -{ - unsigned short v; - asm volatile( - "strh %1, [%2] @ NET_RAP\n\t" - "ldrh %0, [%2, #-4] @ NET_RDP" - : "=r" (v) - : "r" (reg), "r" (ISAIO_BASE + 0x0464)); - return v; -} - -static inline void write_ireg(u_long base, u_int reg, u_int val) -{ - asm volatile( - "strh %1, [%2] @ NET_RAP\n\t" - "strh %0, [%2, #8] @ NET_IDP" - : - : "r" (val), "r" (reg), "r" (ISAIO_BASE + 0x0464)); -} - -static inline unsigned short read_ireg(u_long base_addr, u_int reg) -{ - u_short v; - asm volatile( - "strh %1, [%2] @ NAT_RAP\n\t" - "ldrh %0, [%2, #8] @ NET_IDP\n\t" - : "=r" (v) - : "r" (reg), "r" (ISAIO_BASE + 0x0464)); - return v; -} - -#define am_writeword(dev,off,val) __raw_writew(val, ISAMEM_BASE + ((off) << 1)) -#define am_readword(dev,off) __raw_readw(ISAMEM_BASE + ((off) << 1)) - -static void -am_writebuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned int length) -{ - offset = ISAMEM_BASE + (offset << 1); - length = (length + 1) & ~1; - if ((int)buf & 2) { - asm volatile("strh %2, [%0], #4" - : "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8))); - buf += 2; - length -= 2; - } - while (length > 8) { - register unsigned int tmp asm("r2"), tmp2 asm("r3"); - asm volatile( - "ldmia %0!, {%1, %2}" - : "+r" (buf), "=&r" (tmp), "=&r" (tmp2)); - length -= 8; - asm volatile( - "strh %1, [%0], #4\n\t" - "mov %1, %1, lsr #16\n\t" - "strh %1, [%0], #4\n\t" - "strh %2, [%0], #4\n\t" - "mov %2, %2, lsr #16\n\t" - "strh %2, [%0], #4" - : "+r" (offset), "=&r" (tmp), "=&r" (tmp2)); - } - while (length > 0) { - asm volatile("strh %2, [%0], #4" - : "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8))); - buf += 2; - length -= 2; - } -} - -static void -am_readbuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned int length) -{ - offset = ISAMEM_BASE + (offset << 1); - length = (length + 1) & ~1; - if ((int)buf & 2) { - unsigned int tmp; - asm volatile( - "ldrh %2, [%0], #4\n\t" - "strb %2, [%1], #1\n\t" - "mov %2, %2, lsr #8\n\t" - "strb %2, [%1], #1" - : "=&r" (offset), "=&r" (buf), "=r" (tmp): "0" (offset), "1" (buf)); - length -= 2; - } - while (length > 8) { - register unsigned int tmp asm("r2"), tmp2 asm("r3"), tmp3; - asm volatile( - "ldrh %2, [%0], #4\n\t" - "ldrh %4, [%0], #4\n\t" - "ldrh %3, [%0], #4\n\t" - "orr %2, %2, %4, lsl #16\n\t" - "ldrh %4, [%0], #4\n\t" - "orr %3, %3, %4, lsl #16\n\t" - "stmia %1!, {%2, %3}" - : "=&r" (offset), "=&r" (buf), "=r" (tmp), "=r" (tmp2), "=r" (tmp3) - : "0" (offset), "1" (buf)); - length -= 8; - } - while (length > 0) { - unsigned int tmp; - asm volatile( - "ldrh %2, [%0], #4\n\t" - "strb %2, [%1], #1\n\t" - "mov %2, %2, lsr #8\n\t" - "strb %2, [%1], #1" - : "=&r" (offset), "=&r" (buf), "=r" (tmp) : "0" (offset), "1" (buf)); - length -= 2; - } -} -#else -#error Not compatible -#endif - -static int -am79c961_ramtest(struct net_device *dev, unsigned int val) -{ - unsigned char *buffer = kmalloc (65536, GFP_KERNEL); - int i, error = 0, errorcount = 0; - - if (!buffer) - return 0; - memset (buffer, val, 65536); - am_writebuffer(dev, 0, buffer, 65536); - memset (buffer, val ^ 255, 65536); - am_readbuffer(dev, 0, buffer, 65536); - for (i = 0; i < 65536; i++) { - if (buffer[i] != val && !error) { - printk ("%s: buffer error (%02X %02X) %05X - ", dev->name, val, buffer[i], i); - error = 1; - errorcount ++; - } else if (error && buffer[i] == val) { - printk ("%05X\n", i); - error = 0; - } - } - if (error) - printk ("10000\n"); - kfree (buffer); - return errorcount; -} - -static void am79c961_mc_hash(char *addr, u16 *hash) -{ - int idx, bit; - u32 crc; - - crc = ether_crc_le(ETH_ALEN, addr); - - idx = crc >> 30; - bit = (crc >> 26) & 15; - - hash[idx] |= 1 << bit; -} - -static unsigned int am79c961_get_rx_mode(struct net_device *dev, u16 *hash) -{ - unsigned int mode = MODE_PORT_10BT; - - if (dev->flags & IFF_PROMISC) { - mode |= MODE_PROMISC; - memset(hash, 0xff, 4 * sizeof(*hash)); - } else if (dev->flags & IFF_ALLMULTI) { - memset(hash, 0xff, 4 * sizeof(*hash)); - } else { - struct netdev_hw_addr *ha; - - memset(hash, 0, 4 * sizeof(*hash)); - - netdev_for_each_mc_addr(ha, dev) - am79c961_mc_hash(ha->addr, hash); - } - - return mode; -} - -static void -am79c961_init_for_open(struct net_device *dev) -{ - struct dev_priv *priv = netdev_priv(dev); - unsigned long flags; - unsigned char *p; - u_int hdr_addr, first_free_addr; - u16 multi_hash[4], mode = am79c961_get_rx_mode(dev, multi_hash); - int i; - - /* - * Stop the chip. - */ - spin_lock_irqsave(&priv->chip_lock, flags); - write_rreg (dev->base_addr, CSR0, CSR0_BABL|CSR0_CERR|CSR0_MISS|CSR0_MERR|CSR0_TINT|CSR0_RINT|CSR0_STOP); - spin_unlock_irqrestore(&priv->chip_lock, flags); - - write_ireg (dev->base_addr, 5, 0x00a0); /* Receive address LED */ - write_ireg (dev->base_addr, 6, 0x0081); /* Collision LED */ - write_ireg (dev->base_addr, 7, 0x0090); /* XMIT LED */ - write_ireg (dev->base_addr, 2, 0x0000); /* MODE register selects media */ - - for (i = LADRL; i <= LADRH; i++) - write_rreg (dev->base_addr, i, multi_hash[i - LADRL]); - - for (i = PADRL, p = dev->dev_addr; i <= PADRH; i++, p += 2) - write_rreg (dev->base_addr, i, p[0] | (p[1] << 8)); - - write_rreg (dev->base_addr, MODE, mode); - write_rreg (dev->base_addr, POLLINT, 0); - write_rreg (dev->base_addr, SIZERXR, -RX_BUFFERS); - write_rreg (dev->base_addr, SIZETXR, -TX_BUFFERS); - - first_free_addr = RX_BUFFERS * 8 + TX_BUFFERS * 8 + 16; - hdr_addr = 0; - - priv->rxhead = 0; - priv->rxtail = 0; - priv->rxhdr = hdr_addr; - - for (i = 0; i < RX_BUFFERS; i++) { - priv->rxbuffer[i] = first_free_addr; - am_writeword (dev, hdr_addr, first_free_addr); - am_writeword (dev, hdr_addr + 2, RMD_OWN); - am_writeword (dev, hdr_addr + 4, (-1600)); - am_writeword (dev, hdr_addr + 6, 0); - first_free_addr += 1600; - hdr_addr += 8; - } - priv->txhead = 0; - priv->txtail = 0; - priv->txhdr = hdr_addr; - for (i = 0; i < TX_BUFFERS; i++) { - priv->txbuffer[i] = first_free_addr; - am_writeword (dev, hdr_addr, first_free_addr); - am_writeword (dev, hdr_addr + 2, TMD_STP|TMD_ENP); - am_writeword (dev, hdr_addr + 4, 0xf000); - am_writeword (dev, hdr_addr + 6, 0); - first_free_addr += 1600; - hdr_addr += 8; - } - - write_rreg (dev->base_addr, BASERXL, priv->rxhdr); - write_rreg (dev->base_addr, BASERXH, 0); - write_rreg (dev->base_addr, BASETXL, priv->txhdr); - write_rreg (dev->base_addr, BASERXH, 0); - write_rreg (dev->base_addr, CSR0, CSR0_STOP); - write_rreg (dev->base_addr, CSR3, CSR3_IDONM|CSR3_BABLM|CSR3_DXSUFLO); - write_rreg (dev->base_addr, CSR4, CSR4_APAD_XMIT|CSR4_MFCOM|CSR4_RCVCCOM|CSR4_TXSTRTM|CSR4_JABM); - write_rreg (dev->base_addr, CSR0, CSR0_IENA|CSR0_STRT); -} - -static void am79c961_timer(struct timer_list *t) -{ - struct dev_priv *priv = from_timer(priv, t, timer); - struct net_device *dev = priv->dev; - unsigned int lnkstat, carrier; - unsigned long flags; - - spin_lock_irqsave(&priv->chip_lock, flags); - lnkstat = read_ireg(dev->base_addr, ISALED0) & ISALED0_LNKST; - spin_unlock_irqrestore(&priv->chip_lock, flags); - carrier = netif_carrier_ok(dev); - - if (lnkstat && !carrier) { - netif_carrier_on(dev); - printk("%s: link up\n", dev->name); - } else if (!lnkstat && carrier) { - netif_carrier_off(dev); - printk("%s: link down\n", dev->name); - } - - mod_timer(&priv->timer, jiffies + msecs_to_jiffies(500)); -} - -/* - * Open/initialize the board. - */ -static int -am79c961_open(struct net_device *dev) -{ - struct dev_priv *priv = netdev_priv(dev); - int ret; - - ret = request_irq(dev->irq, am79c961_interrupt, 0, dev->name, dev); - if (ret) - return ret; - - am79c961_init_for_open(dev); - - netif_carrier_off(dev); - - priv->timer.expires = jiffies; - add_timer(&priv->timer); - - netif_start_queue(dev); - - return 0; -} - -/* - * The inverse routine to am79c961_open(). - */ -static int -am79c961_close(struct net_device *dev) -{ - struct dev_priv *priv = netdev_priv(dev); - unsigned long flags; - - del_timer_sync(&priv->timer); - - netif_stop_queue(dev); - netif_carrier_off(dev); - - spin_lock_irqsave(&priv->chip_lock, flags); - write_rreg (dev->base_addr, CSR0, CSR0_STOP); - write_rreg (dev->base_addr, CSR3, CSR3_MASKALL); - spin_unlock_irqrestore(&priv->chip_lock, flags); - - free_irq (dev->irq, dev); - - return 0; -} - -/* - * Set or clear promiscuous/multicast mode filter for this adapter. - */ -static void am79c961_setmulticastlist (struct net_device *dev) -{ - struct dev_priv *priv = netdev_priv(dev); - unsigned long flags; - u16 multi_hash[4], mode = am79c961_get_rx_mode(dev, multi_hash); - int i, stopped; - - spin_lock_irqsave(&priv->chip_lock, flags); - - stopped = read_rreg(dev->base_addr, CSR0) & CSR0_STOP; - - if (!stopped) { - /* - * Put the chip into suspend mode - */ - write_rreg(dev->base_addr, CTRL1, CTRL1_SPND); - - /* - * Spin waiting for chip to report suspend mode - */ - while ((read_rreg(dev->base_addr, CTRL1) & CTRL1_SPND) == 0) { - spin_unlock_irqrestore(&priv->chip_lock, flags); - nop(); - spin_lock_irqsave(&priv->chip_lock, flags); - } - } - - /* - * Update the multicast hash table - */ - for (i = 0; i < ARRAY_SIZE(multi_hash); i++) - write_rreg(dev->base_addr, i + LADRL, multi_hash[i]); - - /* - * Write the mode register - */ - write_rreg(dev->base_addr, MODE, mode); - - if (!stopped) { - /* - * Put the chip back into running mode - */ - write_rreg(dev->base_addr, CTRL1, 0); - } - - spin_unlock_irqrestore(&priv->chip_lock, flags); -} - -static void am79c961_timeout(struct net_device *dev, unsigned int txqueue) -{ - printk(KERN_WARNING "%s: transmit timed out, network cable problem?\n", - dev->name); - - /* - * ought to do some setup of the tx side here - */ - - netif_wake_queue(dev); -} - -/* - * Transmit a packet - */ -static netdev_tx_t -am79c961_sendpacket(struct sk_buff *skb, struct net_device *dev) -{ - struct dev_priv *priv = netdev_priv(dev); - unsigned int hdraddr, bufaddr; - unsigned int head; - unsigned long flags; - - head = priv->txhead; - hdraddr = priv->txhdr + (head << 3); - bufaddr = priv->txbuffer[head]; - head += 1; - if (head >= TX_BUFFERS) - head = 0; - - am_writebuffer (dev, bufaddr, skb->data, skb->len); - am_writeword (dev, hdraddr + 4, -skb->len); - am_writeword (dev, hdraddr + 2, TMD_OWN|TMD_STP|TMD_ENP); - priv->txhead = head; - - spin_lock_irqsave(&priv->chip_lock, flags); - write_rreg (dev->base_addr, CSR0, CSR0_TDMD|CSR0_IENA); - spin_unlock_irqrestore(&priv->chip_lock, flags); - - /* - * If the next packet is owned by the ethernet device, - * then the tx ring is full and we can't add another - * packet. - */ - if (am_readword(dev, priv->txhdr + (priv->txhead << 3) + 2) & TMD_OWN) - netif_stop_queue(dev); - - dev_consume_skb_any(skb); - - return NETDEV_TX_OK; -} - -/* - * If we have a good packet(s), get it/them out of the buffers. - */ -static void -am79c961_rx(struct net_device *dev, struct dev_priv *priv) -{ - do { - struct sk_buff *skb; - u_int hdraddr; - u_int pktaddr; - u_int status; - int len; - - hdraddr = priv->rxhdr + (priv->rxtail << 3); - pktaddr = priv->rxbuffer[priv->rxtail]; - - status = am_readword (dev, hdraddr + 2); - if (status & RMD_OWN) /* do we own it? */ - break; - - priv->rxtail ++; - if (priv->rxtail >= RX_BUFFERS) - priv->rxtail = 0; - - if ((status & (RMD_ERR|RMD_STP|RMD_ENP)) != (RMD_STP|RMD_ENP)) { - am_writeword (dev, hdraddr + 2, RMD_OWN); - dev->stats.rx_errors++; - if (status & RMD_ERR) { - if (status & RMD_FRAM) - dev->stats.rx_frame_errors++; - if (status & RMD_CRC) - dev->stats.rx_crc_errors++; - } else if (status & RMD_STP) - dev->stats.rx_length_errors++; - continue; - } - - len = am_readword(dev, hdraddr + 6); - skb = netdev_alloc_skb(dev, len + 2); - - if (skb) { - skb_reserve(skb, 2); - - am_readbuffer(dev, pktaddr, skb_put(skb, len), len); - am_writeword(dev, hdraddr + 2, RMD_OWN); - skb->protocol = eth_type_trans(skb, dev); - netif_rx(skb); - dev->stats.rx_bytes += len; - dev->stats.rx_packets++; - } else { - am_writeword (dev, hdraddr + 2, RMD_OWN); - dev->stats.rx_dropped++; - break; - } - } while (1); -} - -/* - * Update stats for the transmitted packet - */ -static void -am79c961_tx(struct net_device *dev, struct dev_priv *priv) -{ - do { - short len; - u_int hdraddr; - u_int status; - - hdraddr = priv->txhdr + (priv->txtail << 3); - status = am_readword (dev, hdraddr + 2); - if (status & TMD_OWN) - break; - - priv->txtail ++; - if (priv->txtail >= TX_BUFFERS) - priv->txtail = 0; - - if (status & TMD_ERR) { - u_int status2; - - dev->stats.tx_errors++; - - status2 = am_readword (dev, hdraddr + 6); - - /* - * Clear the error byte - */ - am_writeword (dev, hdraddr + 6, 0); - - if (status2 & TST_RTRY) - dev->stats.collisions += 16; - if (status2 & TST_LCOL) - dev->stats.tx_window_errors++; - if (status2 & TST_LCAR) - dev->stats.tx_carrier_errors++; - if (status2 & TST_UFLO) - dev->stats.tx_fifo_errors++; - continue; - } - dev->stats.tx_packets++; - len = am_readword (dev, hdraddr + 4); - dev->stats.tx_bytes += -len; - } while (priv->txtail != priv->txhead); - - netif_wake_queue(dev); -} - -static irqreturn_t -am79c961_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = (struct net_device *)dev_id; - struct dev_priv *priv = netdev_priv(dev); - u_int status, n = 100; - int handled = 0; - - do { - status = read_rreg(dev->base_addr, CSR0); - write_rreg(dev->base_addr, CSR0, status & - (CSR0_IENA|CSR0_TINT|CSR0_RINT| - CSR0_MERR|CSR0_MISS|CSR0_CERR|CSR0_BABL)); - - if (status & CSR0_RINT) { - handled = 1; - am79c961_rx(dev, priv); - } - if (status & CSR0_TINT) { - handled = 1; - am79c961_tx(dev, priv); - } - if (status & CSR0_MISS) { - handled = 1; - dev->stats.rx_dropped++; - } - if (status & CSR0_CERR) { - handled = 1; - mod_timer(&priv->timer, jiffies); - } - } while (--n && status & (CSR0_RINT | CSR0_TINT)); - - return IRQ_RETVAL(handled); -} - -#ifdef CONFIG_NET_POLL_CONTROLLER -static void am79c961_poll_controller(struct net_device *dev) -{ - unsigned long flags; - local_irq_save(flags); - am79c961_interrupt(dev->irq, dev); - local_irq_restore(flags); -} -#endif - -/* - * Initialise the chip. Note that we always expect - * to be entered with interrupts enabled. - */ -static int -am79c961_hw_init(struct net_device *dev) -{ - struct dev_priv *priv = netdev_priv(dev); - - spin_lock_irq(&priv->chip_lock); - write_rreg (dev->base_addr, CSR0, CSR0_STOP); - write_rreg (dev->base_addr, CSR3, CSR3_MASKALL); - spin_unlock_irq(&priv->chip_lock); - - am79c961_ramtest(dev, 0x66); - am79c961_ramtest(dev, 0x99); - - return 0; -} - -static void __init am79c961_banner(void) -{ - static unsigned version_printed; - - if (net_debug && version_printed++ == 0) - printk(KERN_INFO "%s", version); -} -static const struct net_device_ops am79c961_netdev_ops = { - .ndo_open = am79c961_open, - .ndo_stop = am79c961_close, - .ndo_start_xmit = am79c961_sendpacket, - .ndo_set_rx_mode = am79c961_setmulticastlist, - .ndo_tx_timeout = am79c961_timeout, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = am79c961_poll_controller, -#endif -}; - -static int am79c961_probe(struct platform_device *pdev) -{ - struct resource *res; - struct net_device *dev; - struct dev_priv *priv; - int i, ret; - - res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (!res) - return -ENODEV; - - dev = alloc_etherdev(sizeof(struct dev_priv)); - ret = -ENOMEM; - if (!dev) - goto out; - - SET_NETDEV_DEV(dev, &pdev->dev); - - priv = netdev_priv(dev); - - /* - * Fixed address and IRQ lines here. - * The PNP initialisation should have been - * done by the ether bootp loader. - */ - dev->base_addr = res->start; - ret = platform_get_irq(pdev, 0); - - if (ret < 0) { - ret = -ENODEV; - goto nodev; - } - dev->irq = ret; - - ret = -ENODEV; - if (!request_region(dev->base_addr, 0x18, dev->name)) - goto nodev; - - /* - * Reset the device. - */ - inb(dev->base_addr + NET_RESET); - udelay(5); - - /* - * Check the manufacturer part of the - * ether address. - */ - if (inb(dev->base_addr) != 0x08 || - inb(dev->base_addr + 2) != 0x00 || - inb(dev->base_addr + 4) != 0x2b) - goto release; - - for (i = 0; i < 6; i++) - dev->dev_addr[i] = inb(dev->base_addr + i * 2) & 0xff; - - am79c961_banner(); - - spin_lock_init(&priv->chip_lock); - priv->dev = dev; - timer_setup(&priv->timer, am79c961_timer, 0); - - if (am79c961_hw_init(dev)) - goto release; - - dev->netdev_ops = &am79c961_netdev_ops; - - ret = register_netdev(dev); - if (ret == 0) { - printk(KERN_INFO "%s: ether address %pM\n", - dev->name, dev->dev_addr); - return 0; - } - -release: - release_region(dev->base_addr, 0x18); -nodev: - free_netdev(dev); -out: - return ret; -} - -static struct platform_driver am79c961_driver = { - .probe = am79c961_probe, - .driver = { - .name = "am79c961", - }, -}; - -static int __init am79c961_init(void) -{ - return platform_driver_register(&am79c961_driver); -} - -__initcall(am79c961_init); diff --git a/drivers/net/ethernet/amd/am79c961a.h b/drivers/net/ethernet/amd/am79c961a.h deleted file mode 100644 index 73679e053ceb..000000000000 --- a/drivers/net/ethernet/amd/am79c961a.h +++ /dev/null @@ -1,143 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/drivers/net/ethernet/amd/am79c961a.h - */ - -#ifndef _LINUX_am79c961a_H -#define _LINUX_am79c961a_H - -/* use 0 for production, 1 for verification, >2 for debug. debug flags: */ -#define DEBUG_TX 2 -#define DEBUG_RX 4 -#define DEBUG_INT 8 -#define DEBUG_IC 16 -#ifndef NET_DEBUG -#define NET_DEBUG 0 -#endif - -#define NET_UID 0 -#define NET_RDP 0x10 -#define NET_RAP 0x12 -#define NET_RESET 0x14 -#define NET_IDP 0x16 - -/* - * RAP registers - */ -#define CSR0 0 -#define CSR0_INIT 0x0001 -#define CSR0_STRT 0x0002 -#define CSR0_STOP 0x0004 -#define CSR0_TDMD 0x0008 -#define CSR0_TXON 0x0010 -#define CSR0_RXON 0x0020 -#define CSR0_IENA 0x0040 -#define CSR0_INTR 0x0080 -#define CSR0_IDON 0x0100 -#define CSR0_TINT 0x0200 -#define CSR0_RINT 0x0400 -#define CSR0_MERR 0x0800 -#define CSR0_MISS 0x1000 -#define CSR0_CERR 0x2000 -#define CSR0_BABL 0x4000 -#define CSR0_ERR 0x8000 - -#define CSR3 3 -#define CSR3_EMBA 0x0008 -#define CSR3_DXMT2PD 0x0010 -#define CSR3_LAPPEN 0x0020 -#define CSR3_DXSUFLO 0x0040 -#define CSR3_IDONM 0x0100 -#define CSR3_TINTM 0x0200 -#define CSR3_RINTM 0x0400 -#define CSR3_MERRM 0x0800 -#define CSR3_MISSM 0x1000 -#define CSR3_BABLM 0x4000 -#define CSR3_MASKALL 0x5F00 - -#define CSR4 4 -#define CSR4_JABM 0x0001 -#define CSR4_JAB 0x0002 -#define CSR4_TXSTRTM 0x0004 -#define CSR4_TXSTRT 0x0008 -#define CSR4_RCVCCOM 0x0010 -#define CSR4_RCVCCO 0x0020 -#define CSR4_MFCOM 0x0100 -#define CSR4_MFCO 0x0200 -#define CSR4_ASTRP_RCV 0x0400 -#define CSR4_APAD_XMIT 0x0800 - -#define CTRL1 5 -#define CTRL1_SPND 0x0001 - -#define LADRL 8 -#define LADRM1 9 -#define LADRM2 10 -#define LADRH 11 -#define PADRL 12 -#define PADRM 13 -#define PADRH 14 - -#define MODE 15 -#define MODE_DISRX 0x0001 -#define MODE_DISTX 0x0002 -#define MODE_LOOP 0x0004 -#define MODE_DTCRC 0x0008 -#define MODE_COLL 0x0010 -#define MODE_DRETRY 0x0020 -#define MODE_INTLOOP 0x0040 -#define MODE_PORT_AUI 0x0000 -#define MODE_PORT_10BT 0x0080 -#define MODE_DRXPA 0x2000 -#define MODE_DRXBA 0x4000 -#define MODE_PROMISC 0x8000 - -#define BASERXL 24 -#define BASERXH 25 -#define BASETXL 30 -#define BASETXH 31 - -#define POLLINT 47 - -#define SIZERXR 76 -#define SIZETXR 78 - -#define CSR_MFC 112 - -#define RMD_ENP 0x0100 -#define RMD_STP 0x0200 -#define RMD_CRC 0x0800 -#define RMD_FRAM 0x2000 -#define RMD_ERR 0x4000 -#define RMD_OWN 0x8000 - -#define TMD_ENP 0x0100 -#define TMD_STP 0x0200 -#define TMD_MORE 0x1000 -#define TMD_ERR 0x4000 -#define TMD_OWN 0x8000 - -#define TST_RTRY 0x0400 -#define TST_LCAR 0x0800 -#define TST_LCOL 0x1000 -#define TST_UFLO 0x4000 -#define TST_BUFF 0x8000 - -#define ISALED0 0x0004 -#define ISALED0_LNKST 0x8000 - -struct dev_priv { - unsigned long rxbuffer[RX_BUFFERS]; - unsigned long txbuffer[TX_BUFFERS]; - unsigned char txhead; - unsigned char txtail; - unsigned char rxhead; - unsigned char rxtail; - unsigned long rxhdr; - unsigned long txhdr; - spinlock_t chip_lock; - struct timer_list timer; - struct net_device *dev; -}; - -#endif -- cgit v1.2.3 From 77f6c0b87479c4578ac0798fc249637092ac45a3 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 24 Sep 2020 12:30:50 +0200 Subject: timekeeping: remove arch_gettimeoffset With Arm EBSA110 gone, nothing uses it any more, so the corresponding code and the Kconfig option can be removed. Acked-by: Thomas Gleixner Reviewed-by: Linus Walleij Signed-off-by: Arnd Bergmann --- .../time/modern-timekeeping/arch-support.txt | 33 ---------------------- drivers/Makefile | 2 -- drivers/clocksource/Kconfig | 2 +- include/linux/time.h | 13 --------- kernel/time/Kconfig | 9 ------ kernel/time/clocksource.c | 8 ------ kernel/time/timekeeping.c | 25 +--------------- kernel/trace/Kconfig | 2 -- 8 files changed, 2 insertions(+), 92 deletions(-) delete mo