From f37bb5486ea536c1d61df89feeaeff3f84f0b560 Mon Sep 17 00:00:00 2001 From: Christian Hewitt Date: Mon, 21 Apr 2025 22:12:59 +0200 Subject: Revert "drm/meson: vclk: fix calculation of 59.94 fractional rates" This reverts commit bfbc68e. The patch does permit the offending YUV420 @ 59.94 phy_freq and vclk_freq mode to match in calculations. It also results in all fractional rates being unavailable for use. This was unintended and requires the patch to be reverted. Fixes: bfbc68e4d869 ("drm/meson: vclk: fix calculation of 59.94 fractional rates") Cc: stable@vger.kernel.org Signed-off-by: Christian Hewitt Signed-off-by: Martin Blumenstingl Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20250421201300.778955-2-martin.blumenstingl@googlemail.com Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20250421201300.778955-2-martin.blumenstingl@googlemail.com --- drivers/gpu/drm/meson/meson_vclk.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/meson/meson_vclk.c b/drivers/gpu/drm/meson/meson_vclk.c index 2a942dc6a6dc..2a82119eb58e 100644 --- a/drivers/gpu/drm/meson/meson_vclk.c +++ b/drivers/gpu/drm/meson/meson_vclk.c @@ -790,13 +790,13 @@ meson_vclk_vic_supported_freq(struct meson_drm *priv, unsigned int phy_freq, FREQ_1000_1001(params[i].pixel_freq)); DRM_DEBUG_DRIVER("i = %d phy_freq = %d alt = %d\n", i, params[i].phy_freq, - FREQ_1000_1001(params[i].phy_freq/1000)*1000); + FREQ_1000_1001(params[i].phy_freq/10)*10); /* Match strict frequency */ if (phy_freq == params[i].phy_freq && vclk_freq == params[i].vclk_freq) return MODE_OK; /* Match 1000/1001 variant */ - if (phy_freq == (FREQ_1000_1001(params[i].phy_freq/1000)*1000) && + if (phy_freq == (FREQ_1000_1001(params[i].phy_freq/10)*10) && vclk_freq == FREQ_1000_1001(params[i].vclk_freq)) return MODE_OK; } @@ -1070,7 +1070,7 @@ void meson_vclk_setup(struct meson_drm *priv, unsigned int target, for (freq = 0 ; params[freq].pixel_freq ; ++freq) { if ((phy_freq == params[freq].phy_freq || - phy_freq == FREQ_1000_1001(params[freq].phy_freq/1000)*1000) && + phy_freq == FREQ_1000_1001(params[freq].phy_freq/10)*10) && (vclk_freq == params[freq].vclk_freq || vclk_freq == FREQ_1000_1001(params[freq].vclk_freq))) { if (vclk_freq != params[freq].vclk_freq) -- cgit v1.2.3 From 1017560164b6bbcbc93579266926e6e96675262a Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Mon, 21 Apr 2025 22:13:00 +0200 Subject: drm/meson: use unsigned long long / Hz for frequency types Christian reports that 4K output using YUV420 encoding fails with the following error: Fatal Error, invalid HDMI vclk freq 593406 Modetest shows the following: 3840x2160 59.94 3840 4016 4104 4400 2160 2168 2178 2250 593407 flags: xxxx, xxxx, drm calculated value -------------------------------------^ This indicates that there's a (1kHz) mismatch between the clock calculated by the drm framework and the meson driver. Relevant function call stack: (drm framework) -> meson_encoder_hdmi_atomic_enable() -> meson_encoder_hdmi_set_vclk() -> meson_vclk_setup() The video clock requested by the drm framework is 593407kHz. This is passed by meson_encoder_hdmi_atomic_enable() to meson_encoder_hdmi_set_vclk() and the following formula is applied: - the frequency is halved (which would be 296703.5kHz) and rounded down to the next full integer, which is 296703kHz - TMDS clock is calculated (296703kHz * 10) - video encoder clock is calculated - this needs to match a table from meson_vclk.c and so it doubles the previously halved value again (resulting in 593406kHz) - meson_vclk_setup() can't find (either directly, or by deriving it from 594000kHz * 1000 / 1001 and rounding to the closest integer value - which is 593407kHz as originally requested by the drm framework) a matching clock in it's internal table and errors out with "invalid HDMI vclk freq" Fix the division precision by switching the whole meson driver to use unsigned long long (64-bit) Hz values for clock frequencies instead of unsigned int (32-bit) kHz to fix the rouding error. Fixes: e5fab2ec9ca4 ("drm/meson: vclk: add support for YUV420 setup") Reported-by: Christian Hewitt Signed-off-by: Martin Blumenstingl Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20250421201300.778955-3-martin.blumenstingl@googlemail.com Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20250421201300.778955-3-martin.blumenstingl@googlemail.com --- drivers/gpu/drm/meson/meson_drv.c | 2 +- drivers/gpu/drm/meson/meson_drv.h | 2 +- drivers/gpu/drm/meson/meson_encoder_hdmi.c | 29 +++-- drivers/gpu/drm/meson/meson_vclk.c | 195 +++++++++++++++-------------- drivers/gpu/drm/meson/meson_vclk.h | 13 +- 5 files changed, 126 insertions(+), 115 deletions(-) diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c index 81d2ee37e773..49ff9f1f16d3 100644 --- a/drivers/gpu/drm/meson/meson_drv.c +++ b/drivers/gpu/drm/meson/meson_drv.c @@ -169,7 +169,7 @@ static const struct meson_drm_soc_attr meson_drm_soc_attrs[] = { /* S805X/S805Y HDMI PLL won't lock for HDMI PHY freq > 1,65GHz */ { .limits = { - .max_hdmi_phy_freq = 1650000, + .max_hdmi_phy_freq = 1650000000, }, .attrs = (const struct soc_device_attribute []) { { .soc_id = "GXL (S805*)", }, diff --git a/drivers/gpu/drm/meson/meson_drv.h b/drivers/gpu/drm/meson/meson_drv.h index 3f9345c14f31..be4b0e4df6e1 100644 --- a/drivers/gpu/drm/meson/meson_drv.h +++ b/drivers/gpu/drm/meson/meson_drv.h @@ -37,7 +37,7 @@ struct meson_drm_match_data { }; struct meson_drm_soc_limits { - unsigned int max_hdmi_phy_freq; + unsigned long long max_hdmi_phy_freq; }; struct meson_drm { diff --git a/drivers/gpu/drm/meson/meson_encoder_hdmi.c b/drivers/gpu/drm/meson/meson_encoder_hdmi.c index 6d1c9262a2cf..7752d8ac85f0 100644 --- a/drivers/gpu/drm/meson/meson_encoder_hdmi.c +++ b/drivers/gpu/drm/meson/meson_encoder_hdmi.c @@ -70,12 +70,12 @@ static void meson_encoder_hdmi_set_vclk(struct meson_encoder_hdmi *encoder_hdmi, { struct meson_drm *priv = encoder_hdmi->priv; int vic = drm_match_cea_mode(mode); - unsigned int phy_freq; - unsigned int vclk_freq; - unsigned int venc_freq; - unsigned int hdmi_freq; + unsigned long long phy_freq; + unsigned long long vclk_freq; + unsigned long long venc_freq; + unsigned long long hdmi_freq; - vclk_freq = mode->clock; + vclk_freq = mode->clock * 1000; /* For 420, pixel clock is half unlike venc clock */ if (encoder_hdmi->output_bus_fmt == MEDIA_BUS_FMT_UYYVYY8_0_5X24) @@ -107,7 +107,8 @@ static void meson_encoder_hdmi_set_vclk(struct meson_encoder_hdmi *encoder_hdmi, if (mode->flags & DRM_MODE_FLAG_DBLCLK) venc_freq /= 2; - dev_dbg(priv->dev, "vclk:%d phy=%d venc=%d hdmi=%d enci=%d\n", + dev_dbg(priv->dev, + "vclk:%lluHz phy=%lluHz venc=%lluHz hdmi=%lluHz enci=%d\n", phy_freq, vclk_freq, venc_freq, hdmi_freq, priv->venc.hdmi_use_enci); @@ -122,10 +123,11 @@ static enum drm_mode_status meson_encoder_hdmi_mode_valid(struct drm_bridge *bri struct meson_encoder_hdmi *encoder_hdmi = bridge_to_meson_encoder_hdmi(bridge); struct meson_drm *priv = encoder_hdmi->priv; bool is_hdmi2_sink = display_info->hdmi.scdc.supported; - unsigned int phy_freq; - unsigned int vclk_freq; - unsigned int venc_freq; - unsigned int hdmi_freq; + unsigned long long clock = mode->clock * 1000; + unsigned long long phy_freq; + unsigned long long vclk_freq; + unsigned long long venc_freq; + unsigned long long hdmi_freq; int vic = drm_match_cea_mode(mode); enum drm_mode_status status; @@ -144,12 +146,12 @@ static enum drm_mode_status meson_encoder_hdmi_mode_valid(struct drm_bridge *bri if (status != MODE_OK) return status; - return meson_vclk_dmt_supported_freq(priv, mode->clock); + return meson_vclk_dmt_supported_freq(priv, clock); /* Check against supported VIC modes */ } else if (!meson_venc_hdmi_supported_vic(vic)) return MODE_BAD; - vclk_freq = mode->clock; + vclk_freq = clock; /* For 420, pixel clock is half unlike venc clock */ if (drm_mode_is_420_only(display_info, mode) || @@ -179,7 +181,8 @@ static enum drm_mode_status meson_encoder_hdmi_mode_valid(struct drm_bridge *bri if (mode->flags & DRM_MODE_FLAG_DBLCLK) venc_freq /= 2; - dev_dbg(priv->dev, "%s: vclk:%d phy=%d venc=%d hdmi=%d\n", + dev_dbg(priv->dev, + "%s: vclk:%lluHz phy=%lluHz venc=%lluHz hdmi=%lluHz\n", __func__, phy_freq, vclk_freq, venc_freq, hdmi_freq); return meson_vclk_vic_supported_freq(priv, phy_freq, vclk_freq); diff --git a/drivers/gpu/drm/meson/meson_vclk.c b/drivers/gpu/drm/meson/meson_vclk.c index 2a82119eb58e..3325580d885d 100644 --- a/drivers/gpu/drm/meson/meson_vclk.c +++ b/drivers/gpu/drm/meson/meson_vclk.c @@ -110,7 +110,10 @@ #define HDMI_PLL_LOCK BIT(31) #define HDMI_PLL_LOCK_G12A (3 << 30) -#define FREQ_1000_1001(_freq) DIV_ROUND_CLOSEST(_freq * 1000, 1001) +#define PIXEL_FREQ_1000_1001(_freq) \ + DIV_ROUND_CLOSEST_ULL((_freq) * 1000ULL, 1001ULL) +#define PHY_FREQ_1000_1001(_freq) \ + (PIXEL_FREQ_1000_1001(DIV_ROUND_DOWN_ULL(_freq, 10ULL)) * 10) /* VID PLL Dividers */ enum { @@ -360,11 +363,11 @@ enum { }; struct meson_vclk_params { - unsigned int pll_freq; - unsigned int phy_freq; - unsigned int vclk_freq; - unsigned int venc_freq; - unsigned int pixel_freq; + unsigned long long pll_freq; + unsigned long long phy_freq; + unsigned long long vclk_freq; + unsigned long long venc_freq; + unsigned long long pixel_freq; unsigned int pll_od1; unsigned int pll_od2; unsigned int pll_od3; @@ -372,11 +375,11 @@ struct meson_vclk_params { unsigned int vclk_div; } params[] = { [MESON_VCLK_HDMI_ENCI_54000] = { - .pll_freq = 4320000, - .phy_freq = 270000, - .vclk_freq = 54000, - .venc_freq = 54000, - .pixel_freq = 54000, + .pll_freq = 4320000000, + .phy_freq = 270000000, + .vclk_freq = 54000000, + .venc_freq = 54000000, + .pixel_freq = 54000000, .pll_od1 = 4, .pll_od2 = 4, .pll_od3 = 1, @@ -384,11 +387,11 @@ struct meson_vclk_params { .vclk_div = 1, }, [MESON_VCLK_HDMI_DDR_54000] = { - .pll_freq = 4320000, - .phy_freq = 270000, - .vclk_freq = 54000, - .venc_freq = 54000, - .pixel_freq = 27000, + .pll_freq = 4320000000, + .phy_freq = 270000000, + .vclk_freq = 54000000, + .venc_freq = 54000000, + .pixel_freq = 27000000, .pll_od1 = 4, .pll_od2 = 4, .pll_od3 = 1, @@ -396,11 +399,11 @@ struct meson_vclk_params { .vclk_div = 1, }, [MESON_VCLK_HDMI_DDR_148500] = { - .pll_freq = 2970000, - .phy_freq = 742500, - .vclk_freq = 148500, - .venc_freq = 148500, - .pixel_freq = 74250, + .pll_freq = 2970000000, + .phy_freq = 742500000, + .vclk_freq = 148500000, + .venc_freq = 148500000, + .pixel_freq = 74250000, .pll_od1 = 4, .pll_od2 = 1, .pll_od3 = 1, @@ -408,11 +411,11 @@ struct meson_vclk_params { .vclk_div = 1, }, [MESON_VCLK_HDMI_74250] = { - .pll_freq = 2970000, - .phy_freq = 742500, - .vclk_freq = 74250, - .venc_freq = 74250, - .pixel_freq = 74250, + .pll_freq = 2970000000, + .phy_freq = 742500000, + .vclk_freq = 74250000, + .venc_freq = 74250000, + .pixel_freq = 74250000, .pll_od1 = 2, .pll_od2 = 2, .pll_od3 = 2, @@ -420,11 +423,11 @@ struct meson_vclk_params { .vclk_div = 1, }, [MESON_VCLK_HDMI_148500] = { - .pll_freq = 2970000, - .phy_freq = 1485000, - .vclk_freq = 148500, - .venc_freq = 148500, - .pixel_freq = 148500, + .pll_freq = 2970000000, + .phy_freq = 1485000000, + .vclk_freq = 148500000, + .venc_freq = 148500000, + .pixel_freq = 148500000, .pll_od1 = 1, .pll_od2 = 2, .pll_od3 = 2, @@ -432,11 +435,11 @@ struct meson_vclk_params { .vclk_div = 1, }, [MESON_VCLK_HDMI_297000] = { - .pll_freq = 5940000, - .phy_freq = 2970000, - .venc_freq = 297000, - .vclk_freq = 297000, - .pixel_freq = 297000, + .pll_freq = 5940000000, + .phy_freq = 2970000000, + .venc_freq = 297000000, + .vclk_freq = 297000000, + .pixel_freq = 297000000, .pll_od1 = 2, .pll_od2 = 1, .pll_od3 = 1, @@ -444,11 +447,11 @@ struct meson_vclk_params { .vclk_div = 2, }, [MESON_VCLK_HDMI_594000] = { - .pll_freq = 5940000, - .phy_freq = 5940000, - .venc_freq = 594000, - .vclk_freq = 594000, - .pixel_freq = 594000, + .pll_freq = 5940000000, + .phy_freq = 5940000000, + .venc_freq = 594000000, + .vclk_freq = 594000000, + .pixel_freq = 594000000, .pll_od1 = 1, .pll_od2 = 1, .pll_od3 = 2, @@ -456,11 +459,11 @@ struct meson_vclk_params { .vclk_div = 1, }, [MESON_VCLK_HDMI_594000_YUV420] = { - .pll_freq = 5940000, - .phy_freq = 2970000, - .venc_freq = 594000, - .vclk_freq = 594000, - .pixel_freq = 297000, + .pll_freq = 5940000000, + .phy_freq = 2970000000, + .venc_freq = 594000000, + .vclk_freq = 594000000, + .pixel_freq = 297000000, .pll_od1 = 2, .pll_od2 = 1, .pll_od3 = 1, @@ -617,16 +620,16 @@ static void meson_hdmi_pll_set_params(struct meson_drm *priv, unsigned int m, 3 << 20, pll_od_to_reg(od3) << 20); } -#define XTAL_FREQ 24000 +#define XTAL_FREQ (24 * 1000 * 1000) static unsigned int meson_hdmi_pll_get_m(struct meson_drm *priv, - unsigned int pll_freq) + unsigned long long pll_freq) { /* The GXBB PLL has a /2 pre-multiplier */ if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXBB)) - pll_freq /= 2; + pll_freq = DIV_ROUND_DOWN_ULL(pll_freq, 2); - return pll_freq / XTAL_FREQ; + return DIV_ROUND_DOWN_ULL(pll_freq, XTAL_FREQ); } #define HDMI_FRAC_MAX_GXBB 4096 @@ -635,12 +638,13 @@ static unsigned int meson_hdmi_pll_get_m(struct meson_drm *priv, static unsigned int meson_hdmi_pll_get_frac(struct meson_drm *priv, unsigned int m, - unsigned int pll_freq) + unsigned long long pll_freq) { - unsigned int parent_freq = XTAL_FREQ; + unsigned long long parent_freq = XTAL_FREQ; unsigned int frac_max = HDMI_FRAC_MAX_GXL; unsigned int frac_m; unsigned int frac; + u32 remainder; /* The GXBB PLL has a /2 pre-multiplier and a larger FRAC width */ if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXBB)) { @@ -652,11 +656,11 @@ static unsigned int meson_hdmi_pll_get_frac(struct meson_drm *priv, frac_max = HDMI_FRAC_MAX_G12A; /* We can have a perfect match !*/ - if (pll_freq / m == parent_freq && - pll_freq % m == 0) + if (div_u64_rem(pll_freq, m, &remainder) == parent_freq && + remainder == 0) return 0; - frac = div_u64((u64)pll_freq * (u64)frac_max, parent_freq); + frac = mul_u64_u64_div_u64(pll_freq, frac_max, parent_freq); frac_m = m * frac_max; if (frac_m > frac) return frac_max; @@ -666,7 +670,7 @@ static unsigned int meson_hdmi_pll_get_frac(struct meson_drm *priv, } static bool meson_hdmi_pll_validate_params(struct meson_drm *priv, - unsigned int m, + unsigned long long m, unsigned int frac) { if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXBB)) { @@ -694,7 +698,7 @@ static bool meson_hdmi_pll_validate_params(struct meson_drm *priv, } static bool meson_hdmi_pll_find_params(struct meson_drm *priv, - unsigned int freq, + unsigned long long freq, unsigned int *m, unsigned int *frac, unsigned int *od) @@ -706,7 +710,7 @@ static bool meson_hdmi_pll_find_params(struct meson_drm *priv, continue; *frac = meson_hdmi_pll_get_frac(priv, *m, freq * *od); - DRM_DEBUG_DRIVER("PLL params for %dkHz: m=%x frac=%x od=%d\n", + DRM_DEBUG_DRIVER("PLL params for %lluHz: m=%x frac=%x od=%d\n", freq, *m, *frac, *od); if (meson_hdmi_pll_validate_params(priv, *m, *frac)) @@ -718,7 +722,7 @@ static bool meson_hdmi_pll_find_params(struct meson_drm *priv, /* pll_freq is the frequency after the OD dividers */ enum drm_mode_status -meson_vclk_dmt_supported_freq(struct meson_drm *priv, unsigned int freq) +meson_vclk_dmt_supported_freq(struct meson_drm *priv, unsigned long long freq) { unsigned int od, m, frac; @@ -741,7 +745,7 @@ EXPORT_SYMBOL_GPL(meson_vclk_dmt_supported_freq); /* pll_freq is the frequency after the OD dividers */ static void meson_hdmi_pll_generic_set(struct meson_drm *priv, - unsigned int pll_freq) + unsigned long long pll_freq) { unsigned int od, m, frac, od1, od2, od3; @@ -756,7 +760,7 @@ static void meson_hdmi_pll_generic_set(struct meson_drm *priv, od1 = od / od2; } - DRM_DEBUG_DRIVER("PLL params for %dkHz: m=%x frac=%x od=%d/%d/%d\n", + DRM_DEBUG_DRIVER("PLL params for %lluHz: m=%x frac=%x od=%d/%d/%d\n", pll_freq, m, frac, od1, od2, od3); meson_hdmi_pll_set_params(priv, m, frac, od1, od2, od3); @@ -764,17 +768,18 @@ static void meson_hdmi_pll_generic_set(struct meson_drm *priv, return; } - DRM_ERROR("Fatal, unable to find parameters for PLL freq %d\n", + DRM_ERROR("Fatal, unable to find parameters for PLL freq %lluHz\n", pll_freq); } enum drm_mode_status -meson_vclk_vic_supported_freq(struct meson_drm *priv, unsigned int phy_freq, - unsigned int vclk_freq) +meson_vclk_vic_supported_freq(struct meson_drm *priv, + unsigned long long phy_freq, + unsigned long long vclk_freq) { int i; - DRM_DEBUG_DRIVER("phy_freq = %d vclk_freq = %d\n", + DRM_DEBUG_DRIVER("phy_freq = %lluHz vclk_freq = %lluHz\n", phy_freq, vclk_freq); /* Check against soc revision/package limits */ @@ -785,19 +790,19 @@ meson_vclk_vic_supported_freq(struct meson_drm *priv, unsigned int phy_freq, } for (i = 0 ; params[i].pixel_freq ; ++i) { - DRM_DEBUG_DRIVER("i = %d pixel_freq = %d alt = %d\n", + DRM_DEBUG_DRIVER("i = %d pixel_freq = %lluHz alt = %lluHz\n", i, params[i].pixel_freq, - FREQ_1000_1001(params[i].pixel_freq)); - DRM_DEBUG_DRIVER("i = %d phy_freq = %d alt = %d\n", + PIXEL_FREQ_1000_1001(params[i].pixel_freq)); + DRM_DEBUG_DRIVER("i = %d phy_freq = %lluHz alt = %lluHz\n", i, params[i].phy_freq, - FREQ_1000_1001(params[i].phy_freq/10)*10); + PHY_FREQ_1000_1001(params[i].phy_freq)); /* Match strict frequency */ if (phy_freq == params[i].phy_freq && vclk_freq == params[i].vclk_freq) return MODE_OK; /* Match 1000/1001 variant */ - if (phy_freq == (FREQ_1000_1001(params[i].phy_freq/10)*10) && - vclk_freq == FREQ_1000_1001(params[i].vclk_freq)) + if (phy_freq == PHY_FREQ_1000_1001(params[i].phy_freq) && + vclk_freq == PIXEL_FREQ_1000_1001(params[i].vclk_freq)) return MODE_OK; } @@ -805,8 +810,9 @@ meson_vclk_vic_supported_freq(struct meson_drm *priv, unsigned int phy_freq, } EXPORT_SYMBOL_GPL(meson_vclk_vic_supported_freq); -static void meson_vclk_set(struct meson_drm *priv, unsigned int pll_base_freq, - unsigned int od1, unsigned int od2, unsigned int od3, +static void meson_vclk_set(struct meson_drm *priv, + unsigned long long pll_base_freq, unsigned int od1, + unsigned int od2, unsigned int od3, unsigned int vid_pll_div, unsigned int vclk_div, unsigned int hdmi_tx_div, unsigned int venc_div, bool hdmi_use_enci, bool vic_alternate_clock) @@ -826,15 +832,15 @@ static void meson_vclk_set(struct meson_drm *priv, unsigned int pll_base_freq, meson_hdmi_pll_generic_set(priv, pll_base_freq); } else if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXBB)) { switch (pll_base_freq) { - case 2970000: + case 2970000000: m = 0x3d; frac = vic_alternate_clock ? 0xd02 : 0xe00; break; - case 4320000: + case 4320000000: m = vic_alternate_clock ? 0x59 : 0x5a; frac = vic_alternate_clock ? 0xe8f : 0; break; - case 5940000: + case 5940000000: m = 0x7b; frac = vic_alternate_clock ? 0xa05 : 0xc00; break; @@ -844,15 +850,15 @@ static void meson_vclk_set(struct meson_drm *priv, unsigned int pll_base_freq, } else if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM) || meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXL)) { switch (pll_base_freq) { - case 2970000: + case 2970000000: m = 0x7b; frac = vic_alternate_clock ? 0x281 : 0x300; break; - case 4320000: + case 4320000000: m = vic_alternate_clock ? 0xb3 : 0xb4; frac = vic_alternate_clock ? 0x347 : 0; break; - case 5940000: + case 5940000000: m = 0xf7; frac = vic_alternate_clock ? 0x102 : 0x200; break; @@ -861,15 +867,15 @@ static void meson_vclk_set(struct meson_drm *priv, unsigned int pll_base_freq, meson_hdmi_pll_set_params(priv, m, frac, od1, od2, od3); } else if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A)) { switch (pll_base_freq) { - case 2970000: + case 2970000000: m = 0x7b; frac = vic_alternate_clock ? 0x140b4 : 0x18000; break; - case 4320000: + case 4320000000: m = vic_alternate_clock ? 0xb3 : 0xb4; frac = vic_alternate_clock ? 0x1a3ee : 0; break; - case 5940000: + case 5940000000: m = 0xf7; frac = vic_alternate_clock ? 0x8148 : 0x10000; break; @@ -1025,14 +1031,14 @@ static void meson_vclk_set(struct meson_drm *priv, unsigned int pll_base_freq, } void meson_vclk_setup(struct meson_drm *priv, unsigned int target, - unsigned int phy_freq, unsigned int vclk_freq, - unsigned int venc_freq, unsigned int dac_freq, + unsigned long long phy_freq, unsigned long long vclk_freq, + unsigned long long venc_freq, unsigned long long dac_freq, bool hdmi_use_enci) { bool vic_alternate_clock = false; - unsigned int freq; - unsigned int hdmi_tx_div; - unsigned int venc_div; + unsigned long long freq; + unsigned long long hdmi_tx_div; + unsigned long long venc_div; if (target == MESON_VCLK_TARGET_CVBS) { meson_venci_cvbs_clock_config(priv); @@ -1052,27 +1058,27 @@ void meson_vclk_setup(struct meson_drm *priv, unsigned int target, return; } - hdmi_tx_div = vclk_freq / dac_freq; + hdmi_tx_div = DIV_ROUND_DOWN_ULL(vclk_freq, dac_freq); if (hdmi_tx_div == 0) { - pr_err("Fatal Error, invalid HDMI-TX freq %d\n", + pr_err("Fatal Error, invalid HDMI-TX freq %lluHz\n", dac_freq); return; } - venc_div = vclk_freq / venc_freq; + venc_div = DIV_ROUND_DOWN_ULL(vclk_freq, venc_freq); if (venc_div == 0) { - pr_err("Fatal Error, invalid HDMI venc freq %d\n", + pr_err("Fatal Error, invalid HDMI venc freq %lluHz\n", venc_freq); return; } for (freq = 0 ; params[freq].pixel_freq ; ++freq) { if ((phy_freq == params[freq].phy_freq || - phy_freq == FREQ_1000_1001(params[freq].phy_freq/10)*10) && + phy_freq == PHY_FREQ_1000_1001(params[freq].phy_freq)) && (vclk_freq == params[freq].vclk_freq || - vclk_freq == FREQ_1000_1001(params[freq].vclk_freq))) { + vclk_freq == PIXEL_FREQ_1000_1001(params[freq].vclk_freq))) { if (vclk_freq != params[freq].vclk_freq) vic_alternate_clock = true; else @@ -1098,7 +1104,8 @@ void meson_vclk_setup(struct meson_drm *priv, unsigned int target, } if (!params[freq].pixel_freq) { - pr_err("Fatal Error, invalid HDMI vclk freq %d\n", vclk_freq); + pr_err("Fatal Error, invalid HDMI vclk freq %lluHz\n", + vclk_freq); return; } diff --git a/drivers/gpu/drm/meson/meson_vclk.h b/drivers/gpu/drm/meson/meson_vclk.h index 60617aaf18dd..7ac55744e574 100644 --- a/drivers/gpu/drm/meson/meson_vclk.h +++ b/drivers/gpu/drm/meson/meson_vclk.h @@ -20,17 +20,18 @@ enum { }; /* 27MHz is the CVBS Pixel Clock */ -#define MESON_VCLK_CVBS 27000 +#define MESON_VCLK_CVBS (27 * 1000 * 1000) enum drm_mode_status -meson_vclk_dmt_supported_freq(struct meson_drm *priv, unsigned int freq); +meson_vclk_dmt_supported_freq(struct meson_drm *priv, unsigned long long freq); enum drm_mode_status -meson_vclk_vic_supported_freq(struct meson_drm *priv, unsigned int phy_freq, - unsigned int vclk_freq); +meson_vclk_vic_supported_freq(struct meson_drm *priv, + unsigned long long phy_freq, + unsigned long long vclk_freq); void meson_vclk_setup(struct meson_drm *priv, unsigned int target, - unsigned int phy_freq, unsigned int vclk_freq, - unsigned int venc_freq, unsigned int dac_freq, + unsigned long long phy_freq, unsigned long long vclk_freq, + unsigned long long venc_freq, unsigned long long dac_freq, bool hdmi_use_enci); #endif /* __MESON_VCLK_H */ -- cgit v1.2.3 From 095c8e61f4c71cd4630ee11a82e82cc341b38464 Mon Sep 17 00:00:00 2001 From: Hugo Villeneuve Date: Thu, 17 Apr 2025 15:55:06 -0400 Subject: drm: panel: jd9365da: fix reset signal polarity in unprepare commit a8972d5a49b4 ("drm: panel: jd9365da-h3: fix reset signal polarity") fixed reset signal polarity in jadard_dsi_probe() and jadard_prepare(). It was not done in jadard_unprepare() because of an incorrect assumption about reset line handling in power off mode. After looking into the datasheet, it now appears that before disabling regulators, the reset line is deasserted first, and if reset_before_power_off_vcioo is true, then the reset line is asserted. Fix reset polarity by inverting gpiod_set_value() second argument in in jadard_unprepare(). Fixes: 6b818c533dd8 ("drm: panel: Add Jadard JD9365DA-H3 DSI panel") Fixes: 2b976ad760dc ("drm/panel: jd9365da: Support for kd101ne3-40ti MIPI-DSI panel") Fixes: a8972d5a49b4 ("drm: panel: jd9365da-h3: fix reset signal polarity") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20250417195507.778731-1-hugo@hugovil.com Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20250417195507.778731-1-hugo@hugovil.com --- drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c b/drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c index 7d68a8acfe2e..eb0f8373258c 100644 --- a/drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c +++ b/drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c @@ -129,11 +129,11 @@ static int jadard_unprepare(struct drm_panel *panel) { struct jadard *jadard = panel_to_jadard(panel); - gpiod_set_value(jadard->reset, 1); + gpiod_set_value(jadard->reset, 0); msleep(120); if (jadard->desc->reset_before_power_off_vcioo) { - gpiod_set_value(jadard->reset, 0); + gpiod_set_value(jadard->reset, 1); usleep_range(1000, 2000); } -- cgit v1.2.3 From 5cf3c602df88b471178a5717b17e529d09acad84 Mon Sep 17 00:00:00 2001 From: Felix Kuehling Date: Thu, 17 Apr 2025 10:23:15 -0400 Subject: drm/amdgpu: Use allowed_domains for pinning dmabufs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When determining the domains for pinning DMABufs, filter allowed_domains and fail with a warning if VRAM is forbidden and GTT is not an allowed domain. Fixes: f5e7fabd1f5c ("drm/amdgpu: allow pinning DMA-bufs into VRAM if all importers can do P2P") Suggested-by: Christian König Signed-off-by: Felix Kuehling Reviewed-by: Christian König Signed-off-by: Alex Deucher (cherry picked from commit 3940796a6eefa555fec688a4adee5659ef9fa431) --- drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c index 667080cc9ae1..0446586bd5a7 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c @@ -77,7 +77,7 @@ static int amdgpu_dma_buf_pin(struct dma_buf_attachment *attach) { struct dma_buf *dmabuf = attach->dmabuf; struct amdgpu_bo *bo = gem_to_amdgpu_bo(dmabuf->priv); - u32 domains = bo->preferred_domains; + u32 domains = bo->allowed_domains; dma_resv_assert_held(dmabuf->resv); @@ -93,6 +93,9 @@ static int amdgpu_dma_buf_pin(struct dma_buf_attachment *attach) if (domains & AMDGPU_GEM_DOMAIN_VRAM) bo->flags |= AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED; + if (WARN_ON(!domains)) + return -EINVAL; + return amdgpu_bo_pin(bo, domains); } -- cgit v1.2.3 From 5e56935b519b2fbbca1cafa0cef3c7c3d062f62d Mon Sep 17 00:00:00 2001 From: Felix Kuehling Date: Tue, 15 Apr 2025 23:58:28 -0400 Subject: drm/amdgpu: Don't pin VRAM without DMABUF_MOVE_NOTIFY MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Pinning of VRAM is for peer devices that don't support dynamic attachment and move notifiers. But it requires that all such peer devices are able to access VRAM via PCIe P2P. Any device without P2P access requires migration to GTT, which fails if the memory is already pinned for another peer device. Sharing between GPUs should not require pinning in VRAM. However, if DMABUF_MOVE_NOTIFY is disabled in the kernel build, even DMABufs shared between GPUs must be pinned, which can lead to failures and functional regressions on systems where some peer GPUs are not P2P accessible. Disable VRAM pinning if move notifiers are disabled in the kernel build to fix regressions when sharing BOs between GPUs. Signed-off-by: Felix Kuehling Tested-by: Hao (Claire) Zhou Reviewed-by: Christian König Signed-off-by: Alex Deucher (cherry picked from commit 05185812ae3695fe049c14847ce3cbeccff1bf2e) --- drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c index 0446586bd5a7..5740e8d1a522 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c @@ -81,14 +81,21 @@ static int amdgpu_dma_buf_pin(struct dma_buf_attachment *attach) dma_resv_assert_held(dmabuf->resv); - /* - * Try pinning into VRAM to allow P2P with RDMA NICs without ODP + /* Try pinning into VRAM to allow P2P with RDMA NICs without ODP * support if all attachments can do P2P. If any attachment can't do * P2P just pin into GTT instead. + * + * To avoid with conflicting pinnings between GPUs and RDMA when move + * notifiers are disabled, only allow pinning in VRAM when move + * notiers are enabled. */ - list_for_each_entry(attach, &dmabuf->attachments, node) - if (!attach->peer2peer) - domains &= ~AMDGPU_GEM_DOMAIN_VRAM; + if (!IS_ENABLED(CONFIG_DMABUF_MOVE_NOTIFY)) { + domains &= ~AMDGPU_GEM_DOMAIN_VRAM; + } else { + list_for_each_entry(attach, &dmabuf->attachments, node) + if (!attach->peer2peer) + domains &= ~AMDGPU_GEM_DOMAIN_VRAM; + } if (domains & AMDGPU_GEM_DOMAIN_VRAM) bo->flags |= AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED; -- cgit v1.2.3 From 7eb287beeb60be1e4437be2b4e4e9f0da89aab97 Mon Sep 17 00:00:00 2001 From: Roman Li Date: Tue, 1 Apr 2025 17:05:10 -0400 Subject: drm/amd/display: Fix gpu reset in multidisplay config [Why] The indexing of stream_status in dm_gpureset_commit_state() is incorrect. That leads to asserts in multi-display configuration after gpu reset. [How] Adjust the indexing logic to align stream_status with surface_updates. Fixes: cdaae8371aa9 ("drm/amd/display: Handle GPU reset for DC block") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3808 Reviewed-by: Aurabindo Pillai Reviewed-by: Mario Limonciello Signed-off-by: Roman Li Signed-off-by: Zaeem Mohamed Tested-by: Mark Broadworth Signed-off-by: Alex Deucher (cherry picked from commit d91bc901398741d317d9b55c59ca949d4bc7394b) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 9fed4471405f..8f3a778df646 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -3355,16 +3355,16 @@ static void dm_gpureset_commit_state(struct dc_state *dc_state, for (k = 0; k < dc_state->stream_count; k++) { bundle->stream_update.stream = dc_state->streams[k]; - for (m = 0; m < dc_state->stream_status->plane_count; m++) { + for (m = 0; m < dc_state->stream_status[k].plane_count; m++) { bundle->surface_updates[m].surface = - dc_state->stream_status->plane_states[m]; + dc_state->stream_status[k].plane_states[m]; bundle->surface_updates[m].surface->force_full_update = true; } update_planes_and_stream_adapter(dm->dc, UPDATE_TYPE_FULL, - dc_state->stream_status->plane_count, + dc_state->stream_status[k].plane_count, dc_state->streams[k], &bundle->stream_update, bundle->surface_updates); -- cgit v1.2.3 From 67fe574651c73fe5cc176e35f28f2ec1ba498d14 Mon Sep 17 00:00:00 2001 From: Roman Li Date: Wed, 26 Mar 2025 10:33:51 -0400 Subject: drm/amd/display: Force full update in gpu reset [Why] While system undergoing gpu reset always do full update to sync the dc state before and after reset. [How] Return true in should_reset_plane() if gpu reset detected Reviewed-by: Aurabindo Pillai Reviewed-by: Mario Limonciello Signed-off-by: Roman Li Signed-off-by: Zaeem Mohamed Tested-by: Mark Broadworth Signed-off-by: Alex Deucher (cherry picked from commit 2ba8619b9a378ad218ad6c2e2ccaee8f531e08de) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 8f3a778df646..61ee530d78ea 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -11043,6 +11043,9 @@ static bool should_reset_plane(struct drm_atomic_state *state, state->allow_modeset) return true; + if (amdgpu_in_reset(adev) && state->allow_modeset) + return true; + /* Exit early if we know that we're adding or removing the plane. */ if (old_plane_state->crtc != new_plane_state->crtc) return true; -- cgit v1.2.3 From 756c85e4d0ddc497b4ad5b1f41ad54e838e06188 Mon Sep 17 00:00:00 2001 From: Nicholas Susanto Date: Wed, 2 Apr 2025 15:04:08 -0400 Subject: drm/amd/display: Enable urgent latency adjustment on DCN35 [Why] Urgent latency adjustment was disabled on DCN35 due to issues with P0 enablement on some platforms. Without urgent latency, underflows occur when doing certain high timing configurations. After testing, we found that reenabling urgent latency didn't reintroduce p0 support on multiple platforms. [How] renable urgent latency on DCN35 and setting it to 3000 Mhz. This reverts commit 3412860cc4c0c484f53f91b371483e6e4440c3e5. Reviewed-by: Charlene Liu Signed-off-by: Nicholas Susanto Signed-off-by: Zaeem Mohamed Tested-by: Mark Broadworth Signed-off-by: Alex Deucher (cherry picked from commit cd74ce1f0cddffb3f36d0995d0f61e89f0010738) --- drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c index 92f0a099d089..d9159ca55412 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c @@ -195,9 +195,9 @@ struct _vcs_dpi_soc_bounding_box_st dcn3_5_soc = { .dcn_downspread_percent = 0.5, .gpuvm_min_page_size_bytes = 4096, .hostvm_min_page_size_bytes = 4096, - .do_urgent_latency_adjustment = 0, + .do_urgent_latency_adjustment = 1, .urgent_latency_adjustment_fabric_clock_component_us = 0, - .urgent_latency_adjustment_fabric_clock_reference_mhz = 0, + .urgent_latency_adjustment_fabric_clock_reference_mhz = 3000, }; void dcn35_build_wm_range_table_fpu(struct clk_mgr *clk_mgr) -- cgit v1.2.3 From a92741e72f91b904c1d8c3d409ed8dbe9c1f2b26 Mon Sep 17 00:00:00 2001 From: Felix Kuehling Date: Wed, 16 Apr 2025 00:19:13 -0400 Subject: drm/amdgpu: Allow P2P access through XGMI MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If peer memory is accessible through XGMI, allow leaving it in VRAM rather than forcing its migration to GTT on DMABuf attachment. Signed-off-by: Felix Kuehling Tested-by: Hao (Claire) Zhou Reviewed-by: Christian König Signed-off-by: Alex Deucher (cherry picked from commit 372c8d72c3680fdea3fbb2d6b089f76b4a6d596a) --- drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c | 30 ++++++++++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c index 5740e8d1a522..e6913fcf2c7b 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_dma_buf.c @@ -43,6 +43,29 @@ #include #include +static const struct dma_buf_attach_ops amdgpu_dma_buf_attach_ops; + +/** + * dma_buf_attach_adev - Helper to get adev of an attachment + * + * @attach: attachment + * + * Returns: + * A struct amdgpu_device * if the attaching device is an amdgpu device or + * partition, NULL otherwise. + */ +static struct amdgpu_device *dma_buf_attach_adev(struct dma_buf_attachment *attach) +{ + if (attach->importer_ops == &amdgpu_dma_buf_attach_ops) { + struct drm_gem_object *obj = attach->importer_priv; + struct amdgpu_bo *bo = gem_to_amdgpu_bo(obj); + + return amdgpu_ttm_adev(bo->tbo.bdev); + } + + return NULL; +} + /** * amdgpu_dma_buf_attach - &dma_buf_ops.attach implementation * @@ -54,11 +77,13 @@ static int amdgpu_dma_buf_attach(struct dma_buf *dmabuf, struct dma_buf_attachment *attach) { + struct amdgpu_device *attach_adev = dma_buf_attach_adev(attach); struct drm_gem_object *obj = dmabuf->priv; struct amdgpu_bo *bo = gem_to_amdgpu_bo(obj); struct amdgpu_device *adev = amdgpu_ttm_adev(bo->tbo.bdev); - if (pci_p2pdma_distance(adev->pdev, attach->dev, false) < 0) + if (!amdgpu_dmabuf_is_xgmi_accessible(attach_adev, bo) && + pci_p2pdma_distance(adev->pdev, attach->dev, false) < 0) attach->peer2peer = false; amdgpu_vm_bo_update_shared(bo); @@ -480,6 +505,9 @@ bool amdgpu_dmabuf_is_xgmi_accessible(struct amdgpu_device *adev, struct drm_gem_object *obj = &bo->tbo.base; struct drm_gem_object *gobj; + if (!adev) + return false; + if (obj->import_attach) { struct dma_buf *dma_buf = obj->import_attach->dmabuf; -- cgit v1.2.3 From 870bea21fdf88f45c94c0a3dbb0e3cc1b219680f Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Fri, 4 Apr 2025 09:34:52 -0500 Subject: drm/amd/display: Fix ACPI edid parsing on some Lenovo systems [Why] The ACPI EDID in the BIOS of a Lenovo laptop includes 3 blocks, but dm_helpers_probe_acpi_edid() has a start that is 'char'. The 3rd block index starts after 255, so it can't be indexed properly. This leads to problems with the display when the EDID is parsed. [How] Change the variable type to 'short' so that larger values can be indexed. Cc: Renjith Pananchikkal Reported-by: Mark Pearson Suggested-by: David Ober Fixes: c6a837088bed ("drm/amd/display: Fetch the EDID from _DDC if available for eDP") Reviewed-by: Alex Hung Signed-off-by: Mario Limonciello Signed-off-by: Zaeem Mohamed Tested-by: Mark Broadworth Signed-off-by: Alex Deucher (cherry picked from commit a918bb4a90d423ced2976a794f2724c362c1f063) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c index 2cd35392e2da..1395a748d726 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c @@ -918,7 +918,7 @@ dm_helpers_probe_acpi_edid(void *data, u8 *buf, unsigned int block, size_t len) { struct drm_connector *connector = data; struct acpi_device *acpidev = ACPI_COMPANION(connector->dev->dev); - unsigned char start = block * EDID_LENGTH; + unsigned short start = block * EDID_LENGTH; struct edid *edid; int r; -- cgit v1.2.3 From d59bddce49bfd323f1218bb6c3ad314e5c4e8f9d Mon Sep 17 00:00:00 2001 From: George Shen Date: Mon, 7 Apr 2025 12:35:57 -0400 Subject: drm/amd/display: Use 16ms AUX read interval for LTTPR with old sinks [Why/How] LTTPR are required to program DPCD 0000Eh to 0x4 (16ms) upon AUX read reply to this register. Since old Sinks witih DPCD rev 1.1 and earlier may not support this register, assume the mandatory value is programmed by the LTTPR to avoid AUX timeout issues. Reviewed-by: Wenjing Liu Signed-off-by: George Shen Signed-off-by: Zaeem Mohamed Tested-by: Mark Broadworth Signed-off-by: Alex Deucher (cherry picked from commit 1594b60d74959c0680ddf777a74963c98afcdd7e) --- .../dc/link/protocols/link_dp_training_8b_10b.c | 54 ++++++++++++++-------- 1 file changed, 36 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_training_8b_10b.c b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_training_8b_10b.c index 34d2e097ca2e..5a5d48fadbf2 100644 --- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_training_8b_10b.c +++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_training_8b_10b.c @@ -35,6 +35,17 @@ #define DC_LOGGER \ link->ctx->logger +static void get_default_8b_10b_lttpr_aux_rd_interval( + union training_aux_rd_interval *training_rd_interval) +{ + /* LTTPR are required to program DPCD 0000Eh to 0x4 (16ms) upon AUX + * read reply to this register. Since old sinks with DPCD rev 1.1 + * and earlier may not support this register, assume the mandatory + * value is programmed by the LTTPR to avoid AUX timeout issues. + */ + training_rd_interval->raw = 0x4; +} + static int32_t get_cr_training_aux_rd_interval(struct dc_link *link, const struct dc_link_settings *link_settings, enum lttpr_mode lttpr_mode) @@ -43,17 +54,22 @@ static int32_t get_cr_training_aux_rd_interval(struct dc_link *link, uint32_t wait_in_micro_secs = 100; memset(&training_rd_interval, 0, sizeof(training_rd_interval)); - if (link_dp_get_encoding_format(link_settings) == DP_8b_10b_ENCODING && - link->dpcd_caps.dpcd_rev.raw >= DPCD_REV_12) { - core_link_read_dpcd( - link, - DP_TRAINING_AUX_RD_INTERVAL, - (uint8_t *)&training_rd_interval, - sizeof(training_rd_interval)); - if (lttpr_mode != LTTPR_MODE_NON_TRANSPARENT) - wait_in_micro_secs = 400; - if (training_rd_interval.bits.TRAINIG_AUX_RD_INTERVAL) - wait_in_micro_secs = training_rd_interval.bits.TRAINIG_AUX_RD_INTERVAL * 4000; + if (link_dp_get_encoding_format(link_settings) == DP_8b_10b_ENCODING) { + if (link->dpcd_caps.dpcd_rev.raw >= DPCD_REV_12) + core_link_read_dpcd( + link, + DP_TRAINING_AUX_RD_INTERVAL, + (uint8_t *)&training_rd_interval, + sizeof(training_rd_interval)); + else if (dp_is_lttpr_present(link)) + get_default_8b_10b_lttpr_aux_rd_interval(&training_rd_interval); + + if (training_rd_interval.raw != 0) { + if (lttpr_mode != LTTPR_MODE_NON_TRANSPARENT) + wait_in_micro_secs = 400; + if (training_rd_interval.bits.TRAINIG_AUX_RD_INTERVAL) + wait_in_micro_secs = training_rd_interval.bits.TRAINIG_AUX_RD_INTERVAL * 4000; + } } return wait_in_micro_secs; } @@ -71,13 +87,15 @@ static uint32_t get_eq_training_aux_rd_interval( DP_128B132B_TRAINING_AUX_RD_INTERVAL, (uint8_t *)&training_rd_interval, sizeof(training_rd_interval)); - } else if (link_dp_get_encoding_format(link_settings) == DP_8b_10b_ENCODING && - link->dpcd_caps.dpcd_rev.raw >= DPCD_REV_12) { - core_link_read_dpcd( - link, - DP_TRAINING_AUX_RD_INTERVAL, - (uint8_t *)&training_rd_interval, - sizeof(training_rd_interval)); + } else if (link_dp_get_encoding_format(link_settings) == DP_8b_10b_ENCODING) { + if (link->dpcd_caps.dpcd_rev.raw >= DPCD_REV_12) + core_link_read_dpcd( + link, + DP_TRAINING_AUX_RD_INTERVAL, + (uint8_t *)&training_rd_interval, + sizeof(training_rd_interval)); + else if (dp_is_lttpr_present(link)) + get_default_8b_10b_lttpr_aux_rd_interval(&training_rd_interval); } switch (training_rd_interval.bits.TRAINIG_AUX_RD_INTERVAL) { -- cgit v1.2.3 From 6ed0dc3fd39558f48119daf8f99f835deb7d68da Mon Sep 17 00:00:00 2001 From: Leo Li Date: Tue, 18 Mar 2025 18:05:05 -0400 Subject: drm/amd/display: Default IPS to RCG_IN_ACTIVE_IPS2_IN_OFF [Why] Recent findings show negligible power savings between IPS2 and RCG during static desktop. In fact, DCN related clocks are higher when IPS2 is enabled vs RCG. RCG_IN_ACTIVE is also the default policy for another OS supported by DC, and it has faster entry/exit. [How] Remove previous logic that checked for IPS2 support, and just default to `DMUB_IPS_RCG_IN_ACTIVE_IPS2_IN_OFF`. Fixes: 199888aa25b3 ("drm/amd/display: Update IPS default mode for DCN35/DCN351") Reviewed-by: Aurabindo Pillai Signed-off-by: Leo Li Signed-off-by: Zaeem Mohamed Tested-by: Mark Broadworth Signed-off-by: Alex Deucher (cherry picked from commit 8f772d79ef39b463ead00ef6f009bebada3a9d49) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 20 -------------------- 1 file changed, 20 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 61ee530d78ea..5fe0b4921568 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -1920,26 +1920,6 @@ static enum dmub_ips_disable_type dm_get_default_ips_mode( switch (amdgpu_ip_version(adev, DCE_HWIP, 0)) { case IP_VERSION(3, 5, 0): case IP_VERSION(3, 6, 0): - /* - * On DCN35 systems with Z8 enabled, it's possible for IPS2 + Z8 to - * cause a hard hang. A fix exists for newer PMFW. - * - * As a workaround, for non-fixed PMFW, force IPS1+RCG as the deepest - * IPS state in all cases, except for s0ix and all displays off (DPMS), - * where IPS2 is allowed. - * - * When checking pmfw version, use the major and minor only. - */ - if ((adev->pm.fw_version & 0x00FFFF00) < 0x005D6300) - ret = DMUB_IPS_RCG_IN_ACTIVE_IPS2_IN_OFF; - else if (amdgpu_ip_version(adev, GC_HWIP, 0) > IP_VERSION(11, 5, 0)) - /* - * Other ASICs with DCN35 that have residency issues with - * IPS2 in idle. - * We want them to use IPS2 only in display off cases. - */ - ret = DMUB_IPS_RCG_IN_ACTIVE_IPS2_IN_OFF; - break; case IP_VERSION(3, 5, 1): ret = DMUB_IPS_RCG_IN_ACTIVE_IPS2_IN_OFF; break; -- cgit v1.2.3 From b316727a27d0dac1e6b7ae51204df4d0f241fcc2 Mon Sep 17 00:00:00 2001 From: Gergo Koteles Date: Wed, 2 Apr 2025 19:03:31 +0200 Subject: drm/amd/display: do not copy invalid CRTC timing info Since b255ce4388e0, it is possible that the CRTC timing information for the preferred mode has not yet been calculated while amdgpu_dm_connector_mode_valid() is running. In this case use the CRTC timing information of the actual mode. Fixes: b255ce4388e0 ("drm/amdgpu: don't change mode in amdgpu_dm_connector_mode_valid()") Closes: https://lore.kernel.org/all/ed09edb167e74167a694f4854102a3de6d2f1433.camel@irl.hu/ Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4085 Signed-off-by: Gergo Koteles Reviewed-by: Zaeem Mohamed Tested-by: Mark Broadworth Signed-off-by: Alex Deucher (cherry picked from commit 20232192a5044d1f66dcbef0a24de1bb8157738d) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 5fe0b4921568..536f73131c2d 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -6501,12 +6501,12 @@ decide_crtc_timing_for_drm_display_mode(struct drm_display_mode *drm_mode, const struct drm_display_mode *native_mode, bool scale_enabled) { - if (scale_enabled) { - copy_crtc_timing_for_drm_display_mode(native_mode, drm_mode); - } else if (native_mode->clock == drm_mode->clock && - native_mode->htotal == drm_mode->htotal && - native_mode->vtotal == drm_mode->vtotal) { - copy_crtc_timing_for_drm_display_mode(native_mode, drm_mode); + if (scale_enabled || ( + native_mode->clock == drm_mode->clock && + native_mode->htotal == drm_mode->htotal && + native_mode->vtotal == drm_mode->vtotal)) { + if (native_mode->crtc_clock) + copy_crtc_timing_for_drm_display_mode(native_mode, drm_mode); } else { /* no scaling nor amdgpu inserted, no need to patch */ } -- cgit v1.2.3 From cfa00a625f1c730e93f96b5b4ba7c1b4dc286c79 Mon Sep 17 00:00:00 2001 From: Guoqing Jiang Date: Fri, 6 Dec 2024 19:45:31 +0800 Subject: drm/exynos: Remove unnecessary checking It is not needed since drm_atomic_helper_shutdown checks it. Signed-off-by: Guoqing Jiang Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_drv.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c index f313ae7bc3a3..6cc7bf77bcac 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c @@ -355,8 +355,7 @@ static void exynos_drm_platform_shutdown(struct platform_device *pdev) { struct drm_device *drm = platform_get_drvdata(pdev); - if (drm) - drm_atomic_helper_shutdown(drm); + drm_atomic_helper_shutdown(drm); } static struct platform_driver exynos_drm_platform_driver = { -- cgit v1.2.3 From 0253dadc772e83aaa67aea8bf24a71e7ffe13cb0 Mon Sep 17 00:00:00 2001 From: Wentao Liang Date: Thu, 6 Mar 2025 12:27:20 +0800 Subject: drm/exynos/vidi: Remove redundant error handling in vidi_get_modes() In the vidi_get_modes() function, if either drm_edid_dup() or drm_edid_alloc() fails, the function will immediately return 0, indicating that no display modes can be retrieved. However, in the event of failure in these two functions, it is still necessary to call the subsequent drm_edid_connector_update() function with a NULL drm_edid as an argument. This ensures that operations such as connector settings are performed in its callee function, _drm_edid_connector_property_update. To maintain the integrity of the operation, redundant error handling needs to be removed. Signed-off-by: Wentao Liang Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_vidi.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_vidi.c b/drivers/gpu/drm/exynos/exynos_drm_vidi.c index 08cf79a62025..e644e2382d77 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_vidi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_vidi.c @@ -312,9 +312,6 @@ static int vidi_get_modes(struct drm_connector *connector) else drm_edid = drm_edid_alloc(fake_edid_info, sizeof(fake_edid_info)); - if (!drm_edid) - return 0; - drm_edid_connector_update(connector, drm_edid); count = drm_edid_connector_add_modes(connector); -- cgit v1.2.3 From 30b66dd0523df5153319a2abaa2399c7c76945cb Mon Sep 17 00:00:00 2001 From: Anindya Sundar Gayen Date: Fri, 28 Feb 2025 19:32:57 +0530 Subject: drm/exynos: fixed a spelling error Corrected a spelling mistake in the exynos_drm_fimd driver to improve code readability. No functional changes were made. Signed-off-by: Anindya Sundar Gayen Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fimd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 1ad87584b1c2..c394cc702d7d 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -731,7 +731,7 @@ static void fimd_win_set_pixfmt(struct fimd_context *ctx, unsigned int win, /* * Setting dma-burst to 16Word causes permanent tearing for very small * buffers, e.g. cursor buffer. Burst Mode switching which based on - * plane size is not recommended as plane size varies alot towards the + * plane size is not recommended as plane size varies a lot towards the * end of the screen and rapid movement causes unstable DMA, but it is * still better to change dma-burst than displaying garbage. */ -- cgit v1.2.3 From e8de68ba86f4f84d388f2d964eba96c034120a84 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 18 Mar 2025 09:07:38 +0100 Subject: drm/exynos: exynos7_drm_decon: Consstify struct decon_data static 'struct decon_data' is only read, so it can be const for code safety. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Alim Akhtar Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos7_drm_decon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos7_drm_decon.c b/drivers/gpu/drm/exynos/exynos7_drm_decon.c index 5170f72b0830..f91daefa9d2b 100644 --- a/drivers/gpu/drm/exynos/exynos7_drm_decon.c +++ b/drivers/gpu/drm/exynos/exynos7_drm_decon.c @@ -43,13 +43,13 @@ struct decon_data { unsigned int wincon_burstlen_shift; }; -static struct decon_data exynos7_decon_data = { +static const struct decon_data exynos7_decon_data = { .vidw_buf_start_base = 0x80, .shadowcon_win_protect_shift = 10, .wincon_burstlen_shift = 11, }; -static struct decon_data exynos7870_decon_data = { +static const struct decon_data exynos7870_decon_data = { .vidw_buf_start_base = 0x880, .shadowcon_win_protect_shift = 8, .wincon_burstlen_shift = 10, -- cgit v1.2.3 From c171ad1e8166ff8b3ab9ac94bad2574167b41f66 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Fri, 18 Apr 2025 14:07:00 +0100 Subject: drm/exynos: Fix spelling mistake "enqueu" -> "enqueue" There is a spelling mistake in a DRM_DEV_DEBUG_KMS message. Fix it. Signed-off-by: Colin Ian King Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fimc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimc.c b/drivers/gpu/drm/exynos/exynos_drm_fimc.c index b150cfd92f6e..09e33a26caaf 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimc.c @@ -908,7 +908,7 @@ static void fimc_dst_set_buf_seq(struct fimc_context *ctx, u32 buf_id, u32 buf_num; u32 cfg; - DRM_DEV_DEBUG_KMS(ctx->dev, "buf_id[%d]enqueu[%d]\n", buf_id, enqueue); + DRM_DEV_DEBUG_KMS(ctx->dev, "buf_id[%d]enqueue[%d]\n", buf_id, enqueue); spin_lock_irqsave(&ctx->lock, flags); -- cgit v1.2.3