From c234962b808f289237a40e4ce5fc1c8066d1c9d0 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 17 Apr 2013 23:40:57 -0700 Subject: gpio-rcar: R-Car GPIO IRQ share interrupt R-Car H1 or Gen2 GPIO interrupts are assigned per each GPIO domain, but, Gen1 E1/M1 GPIO interrupts are shared for all GPIO domain. gpio-rcar driver needs IRQF_SHARED flags for these. This patch was tested on Bock-W board Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- drivers/gpio/gpio-rcar.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpio') diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c index b4ca450947b8..0f3d6473bf89 100644 --- a/drivers/gpio/gpio-rcar.c +++ b/drivers/gpio/gpio-rcar.c @@ -333,7 +333,7 @@ static int gpio_rcar_probe(struct platform_device *pdev) } if (devm_request_irq(&pdev->dev, irq->start, - gpio_rcar_irq_handler, 0, name, p)) { + gpio_rcar_irq_handler, IRQF_SHARED, name, p)) { dev_err(&pdev->dev, "failed to request IRQ\n"); ret = -ENOENT; goto err1; -- cgit v1.2.3 From 7e1092b5a264c484001b0cdd1f49bea7884e3366 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 24 May 2013 18:47:24 +0900 Subject: gpio-rcar: Add support for IRQ_TYPE_EDGE_BOTH As hardware support for this feature is not universal for all SoCs a flag, has_both_edge_trigger, has been added to the platform data of the driver to allow this feature to be enabled. The motivation for this is to allow use of the gpio-keys driver on the lager board which is based on the r8a7790 SoC. The V2 of this patch has been fully exercised using that driver on that board. Signed-off-by: Magnus Damm Signed-off-by: Simon Horman --- drivers/gpio/gpio-rcar.c | 26 +++++++++++++++++++++----- 1 file changed, 21 insertions(+), 5 deletions(-) (limited to 'drivers/gpio') diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c index 0f3d6473bf89..d173d56dbb8c 100644 --- a/drivers/gpio/gpio-rcar.c +++ b/drivers/gpio/gpio-rcar.c @@ -49,6 +49,7 @@ struct gpio_rcar_priv { #define POSNEG 0x20 #define EDGLEVEL 0x24 #define FILONOFF 0x28 +#define BOTHEDGE 0x4c static inline u32 gpio_rcar_read(struct gpio_rcar_priv *p, int offs) { @@ -91,7 +92,8 @@ static void gpio_rcar_irq_enable(struct irq_data *d) static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p, unsigned int hwirq, bool active_high_rising_edge, - bool level_trigger) + bool level_trigger, + bool both) { unsigned long flags; @@ -108,6 +110,10 @@ static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p, /* Configure edge or level trigger in EDGLEVEL */ gpio_rcar_modify_bit(p, EDGLEVEL, hwirq, !level_trigger); + /* Select one edge or both edges in BOTHEDGE */ + if (p->config.has_both_edge_trigger) + gpio_rcar_modify_bit(p, BOTHEDGE, hwirq, both); + /* Select "Interrupt Input Mode" in IOINTSEL */ gpio_rcar_modify_bit(p, IOINTSEL, hwirq, true); @@ -127,16 +133,26 @@ static int gpio_rcar_irq_set_type(struct irq_data *d, unsigned int type) switch (type & IRQ_TYPE_SENSE_MASK) { case IRQ_TYPE_LEVEL_HIGH: - gpio_rcar_config_interrupt_input_mode(p, hwirq, true, true); + gpio_rcar_config_interrupt_input_mode(p, hwirq, true, true, + false); break; case IRQ_TYPE_LEVEL_LOW: - gpio_rcar_config_interrupt_input_mode(p, hwirq, false, true); + gpio_rcar_config_interrupt_input_mode(p, hwirq, false, true, + false); break; case IRQ_TYPE_EDGE_RISING: - gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false); + gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false, + false); break; case IRQ_TYPE_EDGE_FALLING: - gpio_rcar_config_interrupt_input_mode(p, hwirq, false, false); + gpio_rcar_config_interrupt_input_mode(p, hwirq, false, false, + false); + break; + case IRQ_TYPE_EDGE_BOTH: + if (!p->config.has_both_edge_trigger) + return -EINVAL; + gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false, + true); break; default: return -EINVAL; -- cgit v1.2.3