From c28f3d80383571d3630df1a0e89500d23e855924 Mon Sep 17 00:00:00 2001 From: Utkarsh Patel Date: Thu, 22 Dec 2022 20:22:46 -0800 Subject: thunderbolt: Do not report errors if on-board retimers are found Currently we return an error even if on-board retimers are found and that's not expected. Fix this to return an error only if there was one and 0 otherwise. Fixes: 1e56c88adecc ("thunderbolt: Runtime resume USB4 port when retimers are scanned") Cc: stable@vger.kernel.org Signed-off-by: Utkarsh Patel Signed-off-by: Mika Westerberg --- drivers/thunderbolt/retimer.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/thunderbolt/retimer.c b/drivers/thunderbolt/retimer.c index 81252e31014a..6ebe7a2886ec 100644 --- a/drivers/thunderbolt/retimer.c +++ b/drivers/thunderbolt/retimer.c @@ -471,10 +471,9 @@ int tb_retimer_scan(struct tb_port *port, bool add) break; } - if (!last_idx) { - ret = 0; + ret = 0; + if (!last_idx) goto out; - } /* Add on-board retimers if they do not exist already */ for (i = 1; i <= last_idx; i++) { -- cgit v1.2.3 From 23257cfc1cb7202fd0065e9f4a6a0aac1c04c4a9 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Thu, 29 Dec 2022 14:10:30 +0200 Subject: thunderbolt: Do not call PM runtime functions in tb_retimer_scan() We cannot call PM runtime functions in tb_retimer_scan() because it will also be called when retimers are scanned from userspace (happens when there is no device connected on ChromeOS for instance) and at the same USB4 port runtime resume hook. This leads to hang because neither can proceed. Fix this by runtime resuming USB4 ports in tb_scan_port() instead. This makes sure the ports are runtime PM active when retimers are added under it while avoiding the reported hang as well. Reported-by: Utkarsh Patel Fixes: 1e56c88adecc ("thunderbolt: Runtime resume USB4 port when retimers are scanned") Cc: stable@vger.kernel.org Acked-by: Yehezkel Bernat Signed-off-by: Mika Westerberg --- drivers/thunderbolt/retimer.c | 17 +++-------------- drivers/thunderbolt/tb.c | 20 +++++++++++++++----- 2 files changed, 18 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/thunderbolt/retimer.c b/drivers/thunderbolt/retimer.c index 6ebe7a2886ec..56008eb91e2e 100644 --- a/drivers/thunderbolt/retimer.c +++ b/drivers/thunderbolt/retimer.c @@ -427,13 +427,6 @@ int tb_retimer_scan(struct tb_port *port, bool add) { u32 status[TB_MAX_RETIMER_INDEX + 1] = {}; int ret, i, last_idx = 0; - struct usb4_port *usb4; - - usb4 = port->usb4; - if (!usb4) - return 0; - - pm_runtime_get_sync(&usb4->dev); /* * Send broadcast RT to make sure retimer indices facing this @@ -441,7 +434,7 @@ int tb_retimer_scan(struct tb_port *port, bool add) */ ret = usb4_port_enumerate_retimers(port); if (ret) - goto out; + return ret; /* * Enable sideband channel for each retimer. We can do this @@ -471,11 +464,11 @@ int tb_retimer_scan(struct tb_port *port, bool add) break; } - ret = 0; if (!last_idx) - goto out; + return 0; /* Add on-board retimers if they do not exist already */ + ret = 0; for (i = 1; i <= last_idx; i++) { struct tb_retimer *rt; @@ -489,10 +482,6 @@ int tb_retimer_scan(struct tb_port *port, bool add) } } -out: - pm_runtime_mark_last_busy(&usb4->dev); - pm_runtime_put_autosuspend(&usb4->dev); - return ret; } diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c index 462845804427..3f1ab30c4fb1 100644 --- a/drivers/thunderbolt/tb.c +++ b/drivers/thunderbolt/tb.c @@ -628,11 +628,15 @@ static void tb_scan_port(struct tb_port *port) * Downstream switch is reachable through two ports. * Only scan on the primary port (link_nr == 0). */ + + if (port->usb4) + pm_runtime_get_sync(&port->usb4->dev); + if (tb_wait_for_port(port, false) <= 0) - return; + goto out_rpm_put; if (port->remote) { tb_port_dbg(port, "port already has a remote\n"); - return; + goto out_rpm_put; } tb_retimer_scan(port, true); @@ -647,12 +651,12 @@ static void tb_scan_port(struct tb_port *port) */ if (PTR_ERR(sw) == -EIO || PTR_ERR(sw) == -EADDRNOTAVAIL) tb_scan_xdomain(port); - return; + goto out_rpm_put; } if (tb_switch_configure(sw)) { tb_switch_put(sw); - return; + goto out_rpm_put; } /* @@ -681,7 +685,7 @@ static void tb_scan_port(struct tb_port *port) if (tb_switch_add(sw)) { tb_switch_put(sw); - return; + goto out_rpm_put; } /* Link the switches using both links if available */ @@ -733,6 +737,12 @@ static void tb_scan_port(struct tb_port *port) tb_add_dp_resources(sw); tb_scan_switch(sw); + +out_rpm_put: + if (port->usb4) { + pm_runtime_mark_last_busy(&port->usb4->dev); + pm_runtime_put_autosuspend(&port->usb4->dev); + } } static void tb_deactivate_and_free_tunnel(struct tb_tunnel *tunnel) -- cgit v1.2.3 From e8ff07fb33026c5c1bb5b81293496faba5d68059 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Fri, 20 May 2022 13:35:19 +0300 Subject: thunderbolt: Use correct function to calculate maximum USB3 link rate We need to take minimum of both sides of the USB3 link into consideration, not just the downstream port. Fix this by calling tb_usb3_max_link_rate() instead. Fixes: 0bd680cd900c ("thunderbolt: Add USB3 bandwidth management") Cc: stable@vger.kernel.org Acked-by: Yehezkel Bernat Signed-off-by: Mika Westerberg --- drivers/thunderbolt/tunnel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/thunderbolt/tunnel.c b/drivers/thunderbolt/tunnel.c index 2c3cf7fc3357..1fc3c29b24f8 100644 --- a/drivers/thunderbolt/tunnel.c +++ b/drivers/thunderbolt/tunnel.c @@ -1275,7 +1275,7 @@ static void tb_usb3_reclaim_available_bandwidth(struct tb_tunnel *tunnel, return; } else if (!ret) { /* Use maximum link rate if the link valid is not set */ - ret = usb4_usb3_port_max_link_rate(tunnel->src_port); + ret = tb_usb3_max_link_rate(tunnel->dst_port, tunnel->src_port); if (ret < 0) { tb_tunnel_warn(tunnel, "failed to read maximum link rate\n"); return; -- cgit v1.2.3 From 84ee211c83212f4d35b56e0603acdcc41f860f1b Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Thu, 8 Sep 2022 09:45:22 +0300 Subject: thunderbolt: Disable XDomain lane 1 only in software connection manager When firmware connection manager is in use we should not touch the lane adapter (well or any) configuration space so do this only when we know that the software connection manager is active. Fixes: 8e1de7042596 ("thunderbolt: Add support for XDomain lane bonding") Cc: stable@vger.kernel.org Acked-by: Yehezkel Bernat Signed-off-by: Mika Westerberg --- drivers/thunderbolt/xdomain.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/thunderbolt/xdomain.c b/drivers/thunderbolt/xdomain.c index cfa83486c9da..3c51e47dd86b 100644 --- a/drivers/thunderbolt/xdomain.c +++ b/drivers/thunderbolt/xdomain.c @@ -1419,12 +1419,19 @@ static int tb_xdomain_get_properties(struct tb_xdomain *xd) * registered, we notify the userspace that it has changed. */ if (!update) { - struct tb_port *port; + /* + * Now disable lane 1 if bonding was not enabled. Do + * this only if bonding was possible at the beginning + * (that is we are the connection manager and there are + * two lanes). + */ + if (xd->bonding_possible) { + struct tb_port *port; - /* Now disable lane 1 if bonding was not enabled */ - port = tb_port_at(xd->route, tb_xdomain_parent(xd)); - if (!port->bonded) - tb_port_disable(port->dual_link_port); + port = tb_port_at(xd->route, tb_xdomain_parent(xd)); + if (!port->bonded) + tb_port_disable(port->dual_link_port); + } if (device_add(&xd->dev)) { dev_err(&xd->dev, "failed to add XDomain device\n"); -- cgit v1.2.3 From bb78654b0b46316dac687fd4b7dc7cce636f46cd Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Duke=20Xin=28=E8=BE=9B=E5=AE=89=E6=96=87=29?= Date: Tue, 27 Dec 2022 01:28:25 -0800 Subject: USB: serial: option: add Quectel EM05-G (CS) modem MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The EM05-G (CS) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030C Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030C Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index dee79c7d82d5..7eeca6c7b270 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -255,6 +255,7 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_EP06 0x0306 #define QUECTEL_PRODUCT_EM05G 0x030a #define QUECTEL_PRODUCT_EM060K 0x030b +#define QUECTEL_PRODUCT_EM05G_CS 0x030c #define QUECTEL_PRODUCT_EM05G_SG 0x0311 #define QUECTEL_PRODUCT_EM12 0x0512 #define QUECTEL_PRODUCT_RM500Q 0x0800 @@ -1161,6 +1162,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) }, { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff), .driver_info = RSVD(6) | ZLP }, + { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_CS, 0xff), + .driver_info = RSVD(6) | ZLP }, { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_SG, 0xff), .driver_info = RSVD(6) | ZLP }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) }, -- cgit v1.2.3 From 6c331f32e32ac71eb3e8b93fceda2802d7ecb889 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Duke=20Xin=28=E8=BE=9B=E5=AE=89=E6=96=87=29?= Date: Tue, 27 Dec 2022 01:44:30 -0800 Subject: USB: serial: option: add Quectel EM05-G (GR) modem MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The EM05-G (GR) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0313 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0313 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 7eeca6c7b270..07ffff889ed1 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -257,6 +257,7 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_EM060K 0x030b #define QUECTEL_PRODUCT_EM05G_CS 0x030c #define QUECTEL_PRODUCT_EM05G_SG 0x0311 +#define QUECTEL_PRODUCT_EM05G_GR 0x0313 #define QUECTEL_PRODUCT_EM12 0x0512 #define QUECTEL_PRODUCT_RM500Q 0x0800 #define QUECTEL_PRODUCT_RM520N 0x0801 @@ -1164,6 +1165,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(6) | ZLP }, { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_CS, 0xff), .driver_info = RSVD(6) | ZLP }, + { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_GR, 0xff), + .driver_info = RSVD(6) | ZLP }, { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_SG, 0xff), .driver_info = RSVD(6) | ZLP }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) }, -- cgit v1.2.3 From b72d13977689f0c717444010e108c4f20658dfee Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Duke=20Xin=28=E8=BE=9B=E5=AE=89=E6=96=87=29?= Date: Tue, 27 Dec 2022 01:51:27 -0800 Subject: USB: serial: option: add Quectel EM05-G (RS) modem MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The EM05-G (RS) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0314 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0314 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 07ffff889ed1..58df076b6944 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -258,6 +258,7 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_EM05G_CS 0x030c #define QUECTEL_PRODUCT_EM05G_SG 0x0311 #define QUECTEL_PRODUCT_EM05G_GR 0x0313 +#define QUECTEL_PRODUCT_EM05G_RS 0x0314 #define QUECTEL_PRODUCT_EM12 0x0512 #define QUECTEL_PRODUCT_RM500Q 0x0800 #define QUECTEL_PRODUCT_RM520N 0x0801 @@ -1167,6 +1168,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(6) | ZLP }, { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_GR, 0xff), .driver_info = RSVD(6) | ZLP }, + { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_RS, 0xff), + .driver_info = RSVD(6) | ZLP }, { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_SG, 0xff), .driver_info = RSVD(6) | ZLP }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) }, -- cgit v1.2.3 From d9bbb15881046bd76f8710c76e26a740eee997ef Mon Sep 17 00:00:00 2001 From: Ali Mirghasemi Date: Wed, 28 Dec 2022 15:08:47 +0330 Subject: USB: serial: option: add Quectel EC200U modem Add support for EC200U modem 0x0901: EC200U - AT + AP + CP + NMEA + DIAG + MOS usb-device output: T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0901 Rev= 3.18 S: Manufacturer=Android S: Product=Android C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 512 Ivl=4096ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 512 Ivl=4096ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Ali Mirghasemi Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 58df076b6944..f00eaff4c913 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -262,6 +262,7 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_EM12 0x0512 #define QUECTEL_PRODUCT_RM500Q 0x0800 #define QUECTEL_PRODUCT_RM520N 0x0801 +#define QUECTEL_PRODUCT_EC200U 0x0901 #define QUECTEL_PRODUCT_EC200S_CN 0x6002 #define QUECTEL_PRODUCT_EC200T 0x6026 #define QUECTEL_PRODUCT_RM500K 0x7001 @@ -1189,6 +1190,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200U, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500K, 0xff, 0x00, 0x00) }, -- cgit v1.2.3 From 3f9e76e31704a325170e5aec2243c8d084d74854 Mon Sep 17 00:00:00 2001 From: Michael Adler Date: Tue, 3 Jan 2023 14:48:50 +0100 Subject: USB: serial: cp210x: add SCALANCE LPE-9000 device id Add the USB serial console device ID for Siemens SCALANCE LPE-9000 which have a USB port for their serial console. Signed-off-by: Michael Adler Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 67372acc2352..832ad592b7ef 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -60,6 +60,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */ { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */ { USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */ + { USB_DEVICE(0x0908, 0x0070) }, /* Siemens SCALANCE LPE-9000 USB Serial Console */ { USB_DEVICE(0x0908, 0x01FF) }, /* Siemens RUGGEDCOM USB Serial Console */ { USB_DEVICE(0x0988, 0x0578) }, /* Teraoka AD2000 */ { USB_DEVICE(0x0B00, 0x3070) }, /* Ingenico 3070 */ -- cgit v1.2.3 From 1541dd0097c0f8f470e76eddf5120fc55a7e3101 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Duke=20Xin=28=E8=BE=9B=E5=AE=89=E6=96=87=29?= Date: Sun, 15 Jan 2023 18:07:27 -0800 Subject: USB: serial: option: add Quectel EM05CN (SG) modem MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The EM05CN (SG) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "MBIM" : AT + MBIM + DIAG + NMEA + MODEM "RMNET" : AT + DIAG + NMEA + Modem + QMI The detailed description of the USB configuration for each mode as follows: MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0310 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 1 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0310 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index f00eaff4c913..2b1d5472f578 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -256,6 +256,7 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_EM05G 0x030a #define QUECTEL_PRODUCT_EM060K 0x030b #define QUECTEL_PRODUCT_EM05G_CS 0x030c +#define QUECTEL_PRODUCT_EM05CN_SG 0x0310 #define QUECTEL_PRODUCT_EM05G_SG 0x0311 #define QUECTEL_PRODUCT_EM05G_GR 0x0313 #define QUECTEL_PRODUCT_EM05G_RS 0x0314 @@ -1163,6 +1164,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff), .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) }, + { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05CN_SG, 0xff), + .driver_info = RSVD(6) | ZLP }, { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff), .driver_info = RSVD(6) | ZLP }, { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_CS, 0xff), -- cgit v1.2.3 From 71dfd381a7c051f16a61f82fbd38a4cca563bdca Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Duke=20Xin=28=E8=BE=9B=E5=AE=89=E6=96=87=29?= Date: Sun, 15 Jan 2023 18:33:28 -0800 Subject: USB: serial: option: add Quectel EM05CN modem MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The EM05CN modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "MBIM" : AT + MBIM + DIAG + NMEA + MODEM "RMNET" : AT + DIAG + NMEA + Modem + QMI The detailed description of the USB configuration for each mode as follows: MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0312 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 1 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0312 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 2b1d5472f578..ee5ac4ef7e16 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -258,6 +258,7 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_EM05G_CS 0x030c #define QUECTEL_PRODUCT_EM05CN_SG 0x0310 #define QUECTEL_PRODUCT_EM05G_SG 0x0311 +#define QUECTEL_PRODUCT_EM05CN 0x0312 #define QUECTEL_PRODUCT_EM05G_GR 0x0313 #define QUECTEL_PRODUCT_EM05G_RS 0x0314 #define QUECTEL_PRODUCT_EM12 0x0512 @@ -1164,6 +1165,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff), .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) }, + { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05CN, 0xff), + .driver_info = RSVD(6) | ZLP }, { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05CN_SG, 0xff), .driver_info = RSVD(6) | ZLP }, { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff), -- cgit v1.2.3 From 1301c7b9f7efad2f11ef924e317c18ebd714fc9a Mon Sep 17 00:00:00 2001 From: Pawel Laszczak Date: Tue, 15 Nov 2022 05:00:39 -0500 Subject: usb: cdns3: remove fetched trb from cache before dequeuing After doorbell DMA fetches the TRB. If during dequeuing request driver changes NORMAL TRB to LINK TRB but doesn't delete it from controller cache then controller will handle cached TRB and packet can be lost. The example scenario for this issue looks like: 1. queue request - set doorbell 2. dequeue request 3. send OUT data packet from host 4. Device will accept this packet which is unexpected 5. queue new request - set doorbell 6. Device lost the expected packet. By setting DFLUSH controller clears DRDY bit and stop DMA transfer. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") cc: Signed-off-by: Pawel Laszczak Acked-by: Peter Chen Link: https://lore.kernel.org/r/20221115100039.441295-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/cdns3/cdns3-gadget.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c index 5adcb349718c..ccfaebca6faa 100644 --- a/drivers/usb/cdns3/cdns3-gadget.c +++ b/drivers/usb/cdns3/cdns3-gadget.c @@ -2614,6 +2614,7 @@ int cdns3_gadget_ep_dequeue(struct usb_ep *ep, u8 req_on_hw_ring = 0; unsigned long flags; int ret = 0; + int val; if (!ep || !request || !ep->desc) return -EINVAL; @@ -2649,6 +2650,13 @@ found: /* Update ring only if removed request is on pending_req_list list */ if (req_on_hw_ring && link_trb) { + /* Stop DMA */ + writel(EP_CMD_DFLUSH, &priv_dev->regs->ep_cmd); + + /* wait for DFLUSH cleared */ + readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val, + !(val & EP_CMD_DFLUSH), 1, 1000); + link_trb->buffer = cpu_to_le32(TRB_BUFFER(priv_ep->trb_pool_dma + ((priv_req->end_trb + 1) * TRB_SIZE))); link_trb->control = cpu_to_le32((le32_to_cpu(link_trb->control) & TRB_CYCLE) | @@ -2660,6 +2668,10 @@ found: cdns3_gadget_giveback(priv_ep, priv_req, -ECONNRESET); + req = cdns3_next_request(&priv_ep->pending_req_list); + if (req) + cdns3_rearm_transfer(priv_ep, 1); + not_found: spin_unlock_irqrestore(&priv_dev->lock, flags); return ret; -- cgit v1.2.3 From d18dcfe9860e842f394e37ba01ca9440ab2178f4 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 23 Dec 2022 09:59:09 -0500 Subject: USB: gadgetfs: Fix race between mounting and unmounting The syzbot fuzzer and Gerald Lee have identified a use-after-free bug in the gadgetfs driver, involving processes concurrently mounting and unmounting the gadgetfs filesystem. In particular, gadgetfs_fill_super() can race with gadgetfs_kill_sb(), causing the latter to deallocate the_device while the former is using it. The output from KASAN says, in part: BUG: KASAN: use-after-free in instrument_atomic_read_write include/linux/instrumented.h:102 [inline] BUG: KASAN: use-after-free in atomic_fetch_sub_release include/linux/atomic/atomic-instrumented.h:176 [inline] BUG: KASAN: use-after-free in __refcount_sub_and_test include/linux/refcount.h:272 [inline] BUG: KASAN: use-after-free in __refcount_dec_and_test include/linux/refcount.h:315 [inline] BUG: KASAN: use-after-free in refcount_dec_and_test include/linux/refcount.h:333 [inline] BUG: KASAN: use-after-free in put_dev drivers/usb/gadget/legacy/inode.c:159 [inline] BUG: KASAN: use-after-free in gadgetfs_kill_sb+0x33/0x100 drivers/usb/gadget/legacy/inode.c:2086 Write of size 4 at addr ffff8880276d7840 by task syz-executor126/18689 CPU: 0 PID: 18689 Comm: syz-executor126 Not tainted 6.1.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: ... atomic_fetch_sub_release include/linux/atomic/atomic-instrumented.h:176 [inline] __refcount_sub_and_test include/linux/refcount.h:272 [inline] __refcount_dec_and_test include/linux/refcount.h:315 [inline] refcount_dec_and_test include/linux/refcount.h:333 [inline] put_dev drivers/usb/gadget/legacy/inode.c:159 [inline] gadgetfs_kill_sb+0x33/0x100 drivers/usb/gadget/legacy/inode.c:2086 deactivate_locked_super+0xa7/0xf0 fs/super.c:332 vfs_get_super fs/super.c:1190 [inline] get_tree_single+0xd0/0x160 fs/super.c:1207 vfs_get_tree+0x88/0x270 fs/super.c:1531 vfs_fsconfig_locked fs/fsopen.c:232 [inline] The simplest solution is to ensure that gadgetfs_fill_super() and gadgetfs_kill_sb() are serialized by making them both acquire a new mutex. Signed-off-by: Alan Stern Reported-and-tested-by: syzbot+33d7ad66d65044b93f16@syzkaller.appspotmail.com Reported-and-tested-by: Gerald Lee Link: https://lore.kernel.org/linux-usb/CAO3qeMVzXDP-JU6v1u5Ags6Q-bb35kg3=C6d04DjzA9ffa5x1g@mail.gmail.com/ Fixes: e5d82a7360d1 ("vfs: Convert gadgetfs to use the new mount API") CC: Link: https://lore.kernel.org/r/Y6XCPXBpn3tmjdCC@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/legacy/inode.c | 28 +++++++++++++++++++++------- 1 file changed, 21 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c index 01c3ead7d1b4..d605bc2e7e8f 100644 --- a/drivers/usb/gadget/legacy/inode.c +++ b/drivers/usb/gadget/legacy/inode.c @@ -229,6 +229,7 @@ static void put_ep (struct ep_data *data) */ static const char *CHIP; +static DEFINE_MUTEX(sb_mutex); /* Serialize superblock operations */ /*----------------------------------------------------------------------*/ @@ -2010,13 +2011,20 @@ gadgetfs_fill_super (struct super_block *sb, struct fs_context *fc) { struct inode *inode; struct dev_data *dev; + int rc; - if (the_device) - return -ESRCH; + mutex_lock(&sb_mutex); + + if (the_device) { + rc = -ESRCH; + goto Done; + } CHIP = usb_get_gadget_udc_name(); - if (!CHIP) - return -ENODEV; + if (!CHIP) { + rc = -ENODEV; + goto Done; + } /* superblock */ sb->s_blocksize = PAGE_SIZE; @@ -2053,13 +2061,17 @@ gadgetfs_fill_super (struct super_block *sb, struct fs_context *fc) * from binding to a controller. */ the_device = dev; - return 0; + rc = 0; + goto Done; -Enomem: + Enomem: kfree(CHIP); CHIP = NULL; + rc = -ENOMEM; - return -ENOMEM; + Done: + mutex_unlock(&sb_mutex); + return rc; } /* "mount -t gadgetfs path /dev/gadget" ends up here */ @@ -2081,6 +2093,7 @@ static int gadgetfs_init_fs_context(struct fs_context *fc) static void gadgetfs_kill_sb (struct super_block *sb) { + mutex_lock(&sb_mutex); kill_litter_super (sb); if (the_device) { put_dev (the_device); @@ -2088,6 +2101,7 @@ gadgetfs_kill_sb (struct super_block *sb) } kfree(CHIP); CHIP = NULL; + mutex_unlock(&sb_mutex); } /*----------------------------------------------------------------------*/ -- cgit v1.2.3 From dbd24ec17b85b45f4e823d1aa5607721920f2b05 Mon Sep 17 00:00:00 2001 From: Juhyung Park Date: Tue, 17 Jan 2023 17:51:54 +0900 Subject: usb-storage: apply IGNORE_UAS only for HIKSEMI MD202 on RTL9210 The commit e00b488e813f ("usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS") blacklists UAS for all of RTL9210 enclosures. The RTL9210 controller was advertised with UAS since its release back in 2019 and was shipped with a lot of enclosure products with different firmware combinations. Blacklist UAS only for HIKSEMI MD202. This should hopefully be replaced with more robust method than just comparing strings. But with limited information [1] provided thus far (dmesg when the device is plugged in, which includes manufacturer and product, but no lsusb -v to compare against), this is the best we can do for now. [1] https://lore.kernel.org/all/20230109115550.71688-1-qkrwngud825@gmail.com Fixes: e00b488e813f ("usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS") Cc: Alan Stern Cc: Hongling Zeng Cc: stable@vger.kernel.org Signed-off-by: Juhyung Park Acked-by: Oliver Neukum Link: https://lore.kernel.org/r/20230117085154.123301-1-qkrwngud825@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/uas-detect.h | 13 +++++++++++++ drivers/usb/storage/unusual_uas.h | 7 ------- 2 files changed, 13 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/storage/uas-detect.h b/drivers/usb/storage/uas-detect.h index 3f720faa6f97..d73282c0ec50 100644 --- a/drivers/usb/storage/uas-detect.h +++ b/drivers/usb/storage/uas-detect.h @@ -116,6 +116,19 @@ static int uas_use_uas_driver(struct usb_interface *intf, if (le16_to_cpu(udev->descriptor.idVendor) == 0x0bc2) flags |= US_FL_NO_ATA_1X; + /* + * RTL9210-based enclosure from HIKSEMI, MD202 reportedly have issues + * with UAS. This isn't distinguishable with just idVendor and + * idProduct, use manufacturer and product too. + * + * Reported-by: Hongling Zeng + */ + if (le16_to_cpu(udev->descriptor.idVendor) == 0x0bda && + le16_to_cpu(udev->descriptor.idProduct) == 0x9210 && + (udev->manufacturer && !strcmp(udev->manufacturer, "HIKSEMI")) && + (udev->product && !strcmp(udev->product, "MD202"))) + flags |= US_FL_IGNORE_UAS; + usb_stor_adjust_quirks(udev, &flags); if (flags & US_FL_IGNORE_UAS) { diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index 251778d14e2d..c7b763d6d102 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -83,13 +83,6 @@ UNUSUAL_DEV(0x0bc2, 0x331a, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_REPORT_LUNS), -/* Reported-by: Hongling Zeng */ -UNUSUAL_DEV(0x0bda, 0x9210, 0x0000, 0x9999, - "Hiksemi", - "External HDD", - USB_SC_DEVICE, USB_PR_DEVICE, NULL, - US_FL_IGNORE_UAS), - /* Reported-by: Benjamin Tissoires */ UNUSUAL_DEV(0x13fd, 0x3940, 0x0000, 0x9999, "Initio Corporation", -- cgit v1.2.3 From 93915a4170e9defd56a767a18e6c4076f3d18609 Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Date: Mon, 16 Jan 2023 16:22:10 +0200 Subject: xhci-pci: set the dma max_seg_size Allow devices to have dma operations beyond 64K, and avoid warnings such as: xhci_hcd 0000:00:14.0: mapping sg segment longer than device claims to support [len=98304] [max=65536] Cc: stable@vger.kernel.org Cc: Takashi Iwai Signed-off-by: Ricardo Ribalda Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20230116142216.1141605-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 79d679b3e076..2c0d7038f040 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -455,6 +455,8 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW) pm_runtime_allow(&dev->dev); + dma_set_max_seg_size(&dev->dev, UINT_MAX); + return 0; put_usb3_hcd: -- cgit v1.2.3 From e8fb5bc76eb86437ab87002d4a36d6da02165654 Mon Sep 17 00:00:00 2001 From: Jimmy Hu Date: Mon, 16 Jan 2023 16:22:11 +0200 Subject: usb: xhci: Check endpoint is valid before dereferencing it When the host controller is not responding, all URBs queued to all endpoints need to be killed. This can cause a kernel panic if we dereference an invalid endpoint. Fix this by using xhci_get_virt_ep() helper to find the endpoint and checking if the endpoint is valid before dereferencing it. [233311.853271] xhci-hcd xhci-hcd.1.auto: xHCI host controller not responding, assume dead [233311.853393] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000e8 [233311.853964] pc : xhci_hc_died+0x10c/0x270 [233311.853971] lr : xhci_hc_died+0x1ac/0x270 [233311.854077] Call trace: [233311.854085] xhci_hc_died+0x10c/0x270 [233311.854093] xhci_stop_endpoint_command_watchdog+0x100/0x1a4 [233311.854105] call_timer_fn+0x50/0x2d4 [233311.854112] expire_timers+0xac/0x2e4 [233311.854118] run_timer_softirq+0x300/0xabc [233311.854127] __do_softirq+0x148/0x528 [233311.854135] irq_exit+0x194/0x1a8 [233311.854143] __handle_domain_irq+0x164/0x1d0 [233311.854149] gic_handle_irq.22273+0x10c/0x188 [233311.854156] el1_irq+0xfc/0x1a8 [233311.854175] lpm_cpuidle_enter+0x25c/0x418 [msm_pm] [233311.854185] cpuidle_enter_state+0x1f0/0x764 [233311.854194] do_idle+0x594/0x6ac [233311.854201] cpu_startup_entry+0x7c/0x80 [233311.854209] secondary_start_kernel+0x170/0x198 Fixes: 50e8725e7c42 ("xhci: Refactor command watchdog and fix split string.") Cc: stable@vger.kernel.org Signed-off-by: Jimmy Hu Signed-off-by: Mathias Nyman Message-ID: <0fe978ed-8269-9774-1c40-f8a98c17e838@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index ddc30037f9ce..f5b0e1ce22af 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1169,7 +1169,10 @@ static void xhci_kill_endpoint_urbs(struct xhci_hcd *xhci, struct xhci_virt_ep *ep; struct xhci_ring *ring; - ep = &xhci->devs[slot_id]->eps[ep_index]; + ep = xhci_get_virt_ep(xhci, slot_id, ep_index); + if (!ep) + return; + if ((ep->ep_state & EP_HAS_STREAMS) || (ep->ep_state & EP_GETTING_NO_STREAMS)) { int stream_id; -- cgit v1.2.3 From a2bc47c43e70cf904b1af49f76d572326c08bca7 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Mon, 16 Jan 2023 16:22:12 +0200 Subject: xhci: Fix null pointer dereference when host dies Make sure xhci_free_dev() and xhci_kill_endpoint_urbs() do not race and cause null pointer dereference when host suddenly dies. Usb core may call xhci_free_dev() which frees the xhci->devs[slot_id] virt device at the same time that xhci_kill_endpoint_urbs() tries to loop through all the device's endpoints, checking if there are any cancelled urbs left to give back. hold the xhci spinlock while freeing the virt device Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20230116142216.1141605-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 79d7931c048a..50b41213e827 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3974,6 +3974,7 @@ static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct xhci_virt_device *virt_dev; struct xhci_slot_ctx *slot_ctx; + unsigned long flags; int i, ret; /* @@ -4000,7 +4001,11 @@ static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) virt_dev->eps[i].ep_state &= ~EP_STOP_CMD_PENDING; virt_dev->udev = NULL; xhci_disable_slot(xhci, udev->slot_id); + + spin_lock_irqsave(&xhci->lock, flags); xhci_free_virt_device(xhci, udev->slot_id); + spin_unlock_irqrestore(&xhci->lock, flags); + } int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id) -- cgit v1.2.3 From 23a3b8d5a2365653fd9bc5a9454d1e7f4facbf85 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Mon, 16 Jan 2023 16:22:13 +0200 Subject: xhci: Add update_hub_device override for PCI xHCI hosts Allow PCI hosts to check and tune roothub and port settings before the hub is up and running. This override is needed to turn off U1 and U2 LPM for some ports based on per port ACPI _DSM, _UPC, or possibly vendor specific mmio values for Intel xHC hosts. Usb core calls the host update_hub_device once it creates a hub. Entering U1 or U2 link power save state on ports with this limitation will cause link to fail, turning the usb device unusable in that setup. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20230116142216.1141605-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 9 +++++++++ drivers/usb/host/xhci.c | 5 ++++- drivers/usb/host/xhci.h | 4 ++++ 3 files changed, 17 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 2c0d7038f040..b5016709b26f 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -78,9 +78,12 @@ static const char hcd_name[] = "xhci_hcd"; static struct hc_driver __read_mostly xhci_pci_hc_driver; static int xhci_pci_setup(struct usb_hcd *hcd); +static int xhci_pci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, + struct usb_tt *tt, gfp_t mem_flags); static const struct xhci_driver_overrides xhci_pci_overrides __initconst = { .reset = xhci_pci_setup, + .update_hub_device = xhci_pci_update_hub_device, }; /* called after powerup, by probe or system-pm "wakeup" */ @@ -386,6 +389,12 @@ static int xhci_pci_setup(struct usb_hcd *hcd) return xhci_pci_reinit(xhci, pdev); } +static int xhci_pci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, + struct usb_tt *tt, gfp_t mem_flags) +{ + return xhci_update_hub_device(hcd, hdev, tt, mem_flags); +} + /* * We need to register our own PCI probe function (instead of the USB core's * function) in order to create a second roothub under xHCI. diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 50b41213e827..89f92fc78bb1 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -5124,7 +5124,7 @@ static int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd, /* Once a hub descriptor is fetched for a device, we need to update the xHC's * internal data structures for the device. */ -static int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, +int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, struct usb_tt *tt, gfp_t mem_flags) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); @@ -5224,6 +5224,7 @@ static int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, xhci_free_command(xhci, config_cmd); return ret; } +EXPORT_SYMBOL_GPL(xhci_update_hub_device); static int xhci_get_frame(struct usb_hcd *hcd) { @@ -5507,6 +5508,8 @@ void xhci_init_driver(struct hc_driver *drv, drv->check_bandwidth = over->check_bandwidth; if (over->reset_bandwidth) drv->reset_bandwidth = over->reset_bandwidth; + if (over->update_hub_device) + drv->update_hub_device = over->update_hub_device; } } EXPORT_SYMBOL_GPL(xhci_init_driver); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index c9f06c5e4e9d..3edfacb93817 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1943,6 +1943,8 @@ struct xhci_driver_overrides { struct usb_host_endpoint *ep); int (*check_bandwidth)(struct usb_hcd *, struct usb_device *); void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *); + int (*update_hub_device)(struct usb_hcd *hcd, struct usb_device *hdev, + struct usb_tt *tt, gfp_t mem_flags); }; #define XHCI_CFC_DELAY 10 @@ -2122,6 +2124,8 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep); int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev); void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev); +int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, + struct usb_tt *tt, gfp_t mem_flags); int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id); int xhci_ext_cap_init(struct xhci_hcd *xhci); -- cgit v1.2.3 From 0522b9a1653048440da5f21747f21e498b9220d1 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Mon, 16 Jan 2023 16:22:14 +0200 Subject: xhci: Add a flag to disable USB3 lpm on a xhci root port level. One USB3 roothub port may support link power management, while another root port on the same xHC can't due to different retimers used for the ports. This is the case with Intel Alder Lake, and possible future platforms where retimers used for USB4 ports cause too long exit latecy to enable native USB3 lpm U1 and U2 states. Add a flag in the xhci port structure to indicate if the port is lpm_incapable, and check it while calculating exit latency. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20230116142216.1141605-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 8 ++++++++ drivers/usb/host/xhci.h | 1 + 2 files changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 89f92fc78bb1..2b280beb0011 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -5049,6 +5049,7 @@ static int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd, struct usb_device *udev, enum usb3_link_state state) { struct xhci_hcd *xhci; + struct xhci_port *port; u16 hub_encoded_timeout; int mel; int ret; @@ -5065,6 +5066,13 @@ static int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd, if (xhci_check_tier_policy(xhci, udev, state) < 0) return USB3_LPM_DISABLED; + /* If connected to root port then check port can handle lpm */ + if (udev->parent && !udev->parent->parent) { + port = xhci->usb3_rhub.ports[udev->portnum - 1]; + if (port->lpm_incapable) + return USB3_LPM_DISABLED; + } + hub_encoded_timeout = xhci_calculate_lpm_timeout(hcd, udev, state); mel = calculate_max_exit_latency(udev, state, hub_encoded_timeout); if (mel < 0) { diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 3edfacb93817..dcee7f3207ad 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1735,6 +1735,7 @@ struct xhci_port { int hcd_portnum; struct xhci_hub *rhub; struct xhci_port_cap *port_cap; + unsigned int lpm_incapable:1; }; struct xhci_hub { -- cgit v1.2.3 From cd702d18c882d5a4ea44bbdb38edd5d5577ef640 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Mon, 16 Jan 2023 16:22:15 +0200 Subject: usb: acpi: add helper to check port lpm capability using acpi _DSM Add a helper to evaluate ACPI usb device specific method (_DSM) provided in case the USB3 port shouldn't enter U1 and U2 link states. This _DSM was added as port specific retimer configuration may lead to exit latencies growing beyond U1/U2 exit limits, and OS needs a way to find which ports can't support U1/U2 link power management states. This _DSM is also used by windows: Link: https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/usb-device-specific-method---dsm- Some patch issues found in testing resolved by Ron Lee Cc: stable@vger.kernel.org Tested-by: Ron Lee Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20230116142216.1141605-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/usb-acpi.c | 65 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 65 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/core/usb-acpi.c b/drivers/usb/core/usb-acpi.c index 6d93428432f1..533baa85083c 100644 --- a/drivers/usb/core/usb-acpi.c +++ b/drivers/usb/core/usb-acpi.c @@ -37,6 +37,71 @@ bool usb_acpi_power_manageable(struct usb_device *hdev, int index) } EXPORT_SYMBOL_GPL(usb_acpi_power_manageable); +#define UUID_USB_CONTROLLER_DSM "ce2ee385-00e6-48cb-9f05-2edb927c4899" +#define USB_DSM_DISABLE_U1_U2_FOR_PORT 5 + +/** + * usb_acpi_port_lpm_incapable - check if lpm should be disabled for a port. + * @hdev: USB device belonging to the usb hub + * @index: zero based port index + * + * Some USB3 ports may not support USB3 link power management U1/U2 states + * due to different retimer setup. ACPI provides _DSM method which returns 0x01 + * if U1 and U2 states should be disabled. Evaluate _DSM with: + * Arg0: UUID = ce2ee385-00e6-48cb-9f05-2edb927c4899 + * Arg1: Revision ID = 0 + * Arg2: Function Index = 5 + * Arg3: (empty) + * + * Return 1 if USB3 port is LPM incapable, negative on error, otherwise 0 + */ + +int usb_acpi_port_lpm_incapable(struct usb_device *hdev, int index) +{ + union acpi_object *obj; + acpi_handle port_handle; + int port1 = index + 1; + guid_t guid; + int ret; + + ret = guid_parse(UUID_USB_CONTROLLER_DSM, &guid); + if (ret) + return ret; + + port_handle = usb_get_hub_port_acpi_handle(hdev, port1); + if (!port_handle) { + dev_dbg(&hdev->dev, "port-%d no acpi handle\n", port1); + return -ENODEV; + } + + if (!acpi_check_dsm(port_handle, &guid, 0, + BIT(USB_DSM_DISABLE_U1_U2_FOR_PORT))) { + dev_dbg(&hdev->dev, "port-%d no _DSM function %d\n", + port1, USB_DSM_DISABLE_U1_U2_FOR_PORT); + return -ENODEV; + } + + obj = acpi_evaluate_dsm(port_handle, &guid, 0, + USB_DSM_DISABLE_U1_U2_FOR_PORT, NULL); + + if (!obj) + return -ENODEV; + + if (obj->type != ACPI_TYPE_INTEGER) { + dev_dbg(&hdev->dev, "evaluate port-%d _DSM failed\n", port1); + ACPI_FREE(obj); + return -EINVAL; + } + + if (obj->integer.value == 0x01) + ret = 1; + + ACPI_FREE(obj); + + return ret; +} +EXPORT_SYMBOL_GPL(usb_acpi_port_lpm_incapable); + /** * usb_acpi_set_power_state - control usb port's power via acpi power * resource -- cgit v1.2.3 From 74622f0a81d0c2bcfc39f9192b788124e8c7f0af Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Mon, 16 Jan 2023 16:22:16 +0200 Subject: xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tables USB3 ports on xHC hosts may have retimers that cause too long exit latency to work with native USB3 U1/U2 link power management states. For now only use usb_acpi_port_lpm_incapable() to evaluate if port lpm should be disabled while setting up the USB3 roothub. Other ways to identify lpm incapable ports can be added here later if ACPI _DSM does not exist. Limit this to Intel hosts for now, this is to my knowledge only an Intel issue. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20230116142216.1141605-8-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index b5016709b26f..fb988e4ea924 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -355,8 +355,38 @@ static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) NULL); ACPI_FREE(obj); } + +static void xhci_find_lpm_incapable_ports(struct usb_hcd *hcd, struct usb_device *hdev) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct xhci_hub *rhub = &xhci->usb3_rhub; + int ret; + int i