From 446e2305827b76e8081057ce56bbd2703b4da8a9 Mon Sep 17 00:00:00 2001 From: Kory Maincent Date: Tue, 14 Nov 2023 12:28:29 +0100 Subject: net: Convert PHYs hwtstamp callback to use kernel_hwtstamp_config The PHYs hwtstamp callback are still getting the timestamp config from ifreq and using copy_from/to_user. Get rid of these functions by using timestamp configuration in parameter. This also allow to move on to kernel_hwtstamp_config and be similar to net devices using the new ndo_hwstamp_get/set. This adds the possibility to manipulate the timestamp configuration from the kernel which was not possible with the copy_from/to_user. Signed-off-by: Kory Maincent Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- include/linux/phy.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/linux/phy.h') diff --git a/include/linux/phy.h b/include/linux/phy.h index 3cc52826f18e..e5f1f41e399c 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -1560,9 +1560,11 @@ static inline bool phy_has_txtstamp(struct phy_device *phydev) return phydev && phydev->mii_ts && phydev->mii_ts->txtstamp; } -static inline int phy_hwtstamp(struct phy_device *phydev, struct ifreq *ifr) +static inline int phy_hwtstamp(struct phy_device *phydev, + struct kernel_hwtstamp_config *cfg, + struct netlink_ext_ack *extack) { - return phydev->mii_ts->hwtstamp(phydev->mii_ts, ifr); + return phydev->mii_ts->hwtstamp(phydev->mii_ts, cfg, extack); } static inline bool phy_rxtstamp(struct phy_device *phydev, struct sk_buff *skb, -- cgit v1.2.3 From 0f7f463d4821a4f52fa5c0a961389e651d50c384 Mon Sep 17 00:00:00 2001 From: Kory Maincent Date: Tue, 14 Nov 2023 12:28:41 +0100 Subject: net: Change the API of PHY default timestamp to MAC Change the API to select MAC default time stamping instead of the PHY. Indeed the PHY is closer to the wire therefore theoretically it has less delay than the MAC timestamping but the reality is different. Due to lower time stamping clock frequency, latency in the MDIO bus and no PHC hardware synchronization between different PHY, the PHY PTP is often less precise than the MAC. The exception is for PHY designed specially for PTP case but these devices are not very widespread. For not breaking the compatibility I introduce a default_timestamp flag in phy_device that is set by the phy driver to know we are using the old API behavior. The phy_set_timestamp function is called at each call of phy_attach_direct. In case of MAC driver using phylink this function is called when the interface is turned up. Then if the interface goes down and up again the last choice of timestamp will be overwritten by the default choice. A solution could be to cache the timestamp status but it can bring other issues. In case of SFP, if we change the module, it doesn't make sense to blindly re-set the timestamp back to PHY, if the new module has a PHY with mediocre timestamping capabilities. Signed-off-by: Kory Maincent Signed-off-by: David S. Miller --- include/linux/phy.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux/phy.h') diff --git a/include/linux/phy.h b/include/linux/phy.h index e5f1f41e399c..317def2a7843 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -604,6 +604,8 @@ struct macsec_ops; * handling shall be postponed until PHY has resumed * @irq_rerun: Flag indicating interrupts occurred while PHY was suspended, * requiring a rerun of the interrupt handler after resume + * @default_timestamp: Flag indicating whether we are using the phy + * timestamp as the default one * @interface: enum phy_interface_t value * @skb: Netlink message for cable diagnostics * @nest: Netlink nest used for cable diagnostics @@ -667,6 +669,8 @@ struct phy_device { unsigned irq_suspended:1; unsigned irq_rerun:1; + unsigned default_timestamp:1; + int rate_matching; enum phy_state state; -- cgit v1.2.3 From 289354f21b2c3fac93e956efd45f256a88a4d997 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Sat, 18 Nov 2023 18:38:05 -0800 Subject: net: partial revert of the "Make timestamping selectable: series Revert following commits: commit acec05fb78ab ("net_tstamp: Add TIMESTAMPING SOFTWARE and HARDWARE mask") commit 11d55be06df0 ("net: ethtool: Add a command to expose current time stamping layer") commit bb8645b00ced ("netlink: specs: Introduce new netlink command to get current timestamp") commit d905f9c75329 ("net: ethtool: Add a command to list available time stamping layers") commit aed5004ee7a0 ("netlink: specs: Introduce new netlink command to list available time stamping layers") commit 51bdf3165f01 ("net: Replace hwtstamp_source by timestamping layer") commit 0f7f463d4821 ("net: Change the API of PHY default timestamp to MAC") commit 091fab122869 ("net: ethtool: ts: Update GET_TS to reply the current selected timestamp") commit 152c75e1d002 ("net: ethtool: ts: Let the active time stamping layer be selectable") commit ee60ea6be0d3 ("netlink: specs: Introduce time stamping set command") They need more time for reviews. Link: https://lore.kernel.org/all/20231118183529.6e67100c@kernel.org/ Signed-off-by: Jakub Kicinski --- include/linux/phy.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux/phy.h') diff --git a/include/linux/phy.h b/include/linux/phy.h index 317def2a7843..e5f1f41e399c 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -604,8 +604,6 @@ struct macsec_ops; * handling shall be postponed until PHY has resumed * @irq_rerun: Flag indicating interrupts occurred while PHY was suspended, * requiring a rerun of the interrupt handler after resume - * @default_timestamp: Flag indicating whether we are using the phy - * timestamp as the default one * @interface: enum phy_interface_t value * @skb: Netlink message for cable diagnostics * @nest: Netlink nest used for cable diagnostics @@ -669,8 +667,6 @@ struct phy_device { unsigned irq_suspended:1; unsigned irq_rerun:1; - unsigned default_timestamp:1; - int rate_matching; enum phy_state state; -- cgit v1.2.3 From 243ad8df7a1bd24c2e01bd99d9f0bb88844dae91 Mon Sep 17 00:00:00 2001 From: "Russell King (Oracle)" Date: Fri, 24 Nov 2023 12:27:52 +0000 Subject: net: phy: add possible interfaces Add a possible_interfaces member to struct phy_device to indicate which interfaces a clause 45 PHY may switch between depending on the media. This must be populated by the PHY driver by the time the .config_init() method completes according to the PHYs host-side configuration. For example, the Marvell 88x3310 PHY can switch between 10GBASE-R, 5GBASE-R, 2500BASE-X, and SGMII on the host side depending on the media side speed, so all these interface modes are set in the possible_interfaces member. This allows phylib users (such as phylink) to know in advance which interface modes to expect, which allows them to appropriately restrict the advertised link modes according to the capabilities of other parts of the link. Tested-by: Luo Jie Signed-off-by: Russell King (Oracle) Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/E1r6VHk-00DDLN-I7@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski --- include/linux/phy.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/phy.h') diff --git a/include/linux/phy.h b/include/linux/phy.h index e5f1f41e399c..6e7ebcc50b85 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -605,6 +605,8 @@ struct macsec_ops; * @irq_rerun: Flag indicating interrupts occurred while PHY was suspended, * requiring a rerun of the interrupt handler after resume * @interface: enum phy_interface_t value + * @possible_interfaces: bitmap if interface modes that the attached PHY + * will switch between depending on media speed. * @skb: Netlink message for cable diagnostics * @nest: Netlink nest used for cable diagnostics * @ehdr: nNtlink header for cable diagnostics @@ -674,6 +676,7 @@ struct phy_device { u32 dev_flags; phy_interface_t interface; + DECLARE_PHY_INTERFACE_MASK(possible_interfaces); /* * forced speed & duplex (no autoneg) -- cgit v1.2.3 From 0c476157085fe2ad13b9bec70ea672e86647fa1a Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Tue, 12 Dec 2023 06:41:43 +0100 Subject: net: phy: c45: add genphy_c45_pma_read_ext_abilities() function Move part of the genphy_c45_pma_read_abilities() code to a separate function. Some PHYs do not implement PMA/PMD status 2 register (Register 1.8) but do implement PMA/PMD extended ability register (Register 1.11). To make use of it, we need to be able to access this part of code separately. Signed-off-by: Oleksij Rempel Reviewed-by: Andrew Lunn Reviewed-by: Russell King (Oracle) Link: https://lore.kernel.org/r/20231212054144.87527-2-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski --- include/linux/phy.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/phy.h') diff --git a/include/linux/phy.h b/include/linux/phy.h index 6e7ebcc50b85..dbb5e13e3e1b 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -1866,6 +1866,7 @@ int genphy_c45_an_config_aneg(struct phy_device *phydev); int genphy_c45_an_disable_aneg(struct phy_device *phydev); int genphy_c45_read_mdix(struct phy_device *phydev); int genphy_c45_pma_read_abilities(struct phy_device *phydev); +int genphy_c45_pma_read_ext_abilities(struct phy_device *phydev); int genphy_c45_pma_baset1_read_abilities(struct phy_device *phydev); int genphy_c45_read_eee_abilities(struct phy_device *phydev); int genphy_c45_pma_baset1_read_master_slave(struct phy_device *phydev); -- cgit v1.2.3 From ebb30ccbbdbd6fae5177b676da4f4ac92bb4f635 Mon Sep 17 00:00:00 2001 From: Christian Marangi Date: Fri, 15 Dec 2023 14:15:31 +0100 Subject: net: phy: make addr type u8 in phy_package_shared struct Switch addr type in phy_package_shared struct to u8. The value is already checked to be non negative and to be less than PHY_MAX_ADDR, hence u8 is better suited than using int. Signed-off-by: Christian Marangi Reviewed-by: Russell King (Oracle) Signed-off-by: David S. Miller --- include/linux/phy.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux/phy.h') diff --git a/include/linux/phy.h b/include/linux/phy.h index dbb5e13e3e1b..4b13cc85c4f5 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -338,7 +338,7 @@ struct mdio_bus_stats { * phy_package_leave(). */ struct phy_package_shared { - int addr; + u8 addr; refcount_t refcnt; unsigned long flags; size_t priv_size; -- cgit v1.2.3 From 9eea577eb1155fe4a183bc5e7bf269b0b2e7a6ba Mon Sep 17 00:00:00 2001 From: Christian Marangi Date: Fri, 15 Dec 2023 14:15:32 +0100 Subject: net: phy: extend PHY package API to support multiple global address Current API for PHY package are limited to single address to configure global settings for the PHY package. It was found that some PHY package (for example the qca807x, a PHY package that is shipped with a bundle of 5 PHY) requires multiple PHY address to configure global settings. An example scenario is a PHY that have a dedicated PHY for PSGMII/serdes calibrarion and have a specific PHY in the package where the global PHY mode is set and affects every other PHY in the package. Change the API in the following way: - Change phy_package_join() to take the base addr of the PHY package instead of the global PHY addr. - Make __/phy_package_write/read() require an additional arg that select what global PHY address to use by passing the offset from the base addr passed on phy_package_join(). Each user of this API is updated to follow this new implementation following a pattern where an enum is defined to declare the offset of the addr. We also drop the check if shared is defined as any user of the phy_package_read/write is expected to use phy_package_join first. Misuse of this will correctly trigger a kernel panic for NULL pointer exception. Signed-off-by: Christian Marangi Signed-off-by: David S. Miller --- include/linux/phy.h | 64 +++++++++++++++++++++++++++++++++++------------------ 1 file changed, 42 insertions(+), 22 deletions(-) (limited to 'include/linux/phy.h') diff --git a/include/linux/phy.h b/include/linux/phy.h index 4b13cc85c4f5..d653f660c39d 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -327,7 +327,8 @@ struct mdio_bus_stats { /** * struct phy_package_shared - Shared information in PHY packages - * @addr: Common PHY address used to combine PHYs in one package + * @base_addr: Base PHY address of PHY package used to combine PHYs + * in one package and for offset calculation of phy_package_read/write * @refcnt: Number of PHYs connected to this shared data * @flags: Initialization of PHY package * @priv_size: Size of the shared private data @priv @@ -338,7 +339,7 @@ struct mdio_bus_stats { * phy_package_leave(). */ struct phy_package_shared { - u8 addr; + u8 base_addr; refcount_t refcnt; unsigned long flags; size_t priv_size; @@ -1976,10 +1977,10 @@ int phy_ethtool_get_link_ksettings(struct net_device *ndev, int phy_ethtool_set_link_ksettings(struct net_device *ndev, const struct ethtool_link_ksettings *cmd); int phy_ethtool_nway_reset(struct net_device *ndev); -int phy_package_join(struct phy_device *phydev, int addr, size_t priv_size); +int phy_package_join(struct phy_device *phydev, int base_addr, size_t priv_size); void phy_package_leave(struct phy_device *phydev); int devm_phy_package_join(struct device *dev, struct phy_device *phydev, - int addr, size_t priv_size); + int base_addr, size_t priv_size); int __init mdio_bus_init(void); void mdio_bus_exit(void); @@ -2002,46 +2003,65 @@ int __phy_hwtstamp_set(struct phy_device *phydev, struct kernel_hwtstamp_config *config, struct netlink_ext_ack *extack); -static inline int phy_package_read(struct phy_device *phydev, u32 regnum) +static inline int phy_package_address(struct phy_device *phydev, + unsigned int addr_offset) { struct phy_package_shared *shared = phydev->shared; + u8 base_addr = shared->base_addr; - if (!shared) + if (addr_offset >= PHY_MAX_ADDR - base_addr) return -EIO; - return mdiobus_read(phydev->mdio.bus, shared->addr, regnum); + /* we know that addr will be in the range 0..31 and thus the + * implicit cast to a signed int is not a problem. + */ + return base_addr + addr_offset; } -static inline int __phy_package_read(struct phy_device *phydev, u32 regnum) +static inline int phy_package_read(struct phy_device *phydev, + unsigned int addr_offset, u32 regnum) { - struct phy_package_shared *shared = phydev->shared; + int addr = phy_package_address(phydev, addr_offset); - if (!shared) - return -EIO; + if (addr < 0) + return addr; + + return mdiobus_read(phydev->mdio.bus, addr, regnum); +} + +static inline int __phy_package_read(struct phy_device *phydev, + unsigned int addr_offset, u32 regnum) +{ + int addr = phy_package_address(phydev, addr_offset); + + if (addr < 0) + return addr; - return __mdiobus_read(phydev->mdio.bus, shared->addr, regnum); + return __mdiobus_read(phydev->mdio.bus, addr, regnum); } static inline int phy_package_write(struct phy_device *phydev, - u32 regnum, u16 val) + unsigned int addr_offset, u32 regnum, + u16 val) { - struct phy_package_shared *shared = phydev->shared; + int addr = phy_package_address(phydev, addr_offset); - if (!shared) - return -EIO; + if (addr < 0) + return addr; - return mdiobus_write(phydev->mdio.bus, shared->addr, regnum, val); + return mdiobus_write(phydev->mdio.bus, addr, regnum, val); } static inline int __phy_package_write(struct phy_device *phydev, - u32 regnum, u16 val) + unsigned int addr_offset, u32 regnum, + u16 val) { - struct phy_package_shared *shared = phydev->shared; + int addr = phy_package_address(phydev, addr_offset); - if (!shared) - return -EIO; + if (addr < 0) + return addr; - return __mdiobus_write(phydev->mdio.bus, shared->addr, regnum, val); + return __mdiobus_write(phydev->mdio.bus, addr, regnum, val); } static inline bool __phy_package_set_once(struct phy_device *phydev, -- cgit v1.2.3 From d63710fc0f1a501fd75a7025e3070a96ffa1645f Mon Sep 17 00:00:00 2001 From: Christian Marangi Date: Fri, 15 Dec 2023 14:15:34 +0100 Subject: net: phy: add support for PHY package MMD read/write Some PHY in PHY package may require to read/write MMD regs to correctly configure the PHY package. Add support for these additional required function in both lock and no lock variant. It's assumed that the entire PHY package is either C22 or C45. We use C22 or C45 way of writing/reading to mmd regs based on the passed phydev whether it's C22 or C45. Signed-off-by: Christian Marangi Signed-off-by: David S. Miller --- include/linux/phy.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include/linux/phy.h') diff --git a/include/linux/phy.h b/include/linux/phy.h index d653f660c39d..e9e85d347587 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -2064,6 +2064,22 @@ static inline int __phy_package_write(struct phy_device *phydev, return __mdiobus_write(phydev->mdio.bus, addr, regnum, val); } +int __phy_package_read_mmd(struct phy_device *phydev, + unsigned int addr_offset, int devad, + u32 regnum); + +int phy_package_read_mmd(struct phy_device *phydev, + unsigned int addr_offset, int devad, + u32 regnum); + +int __phy_package_write_mmd(struct phy_device *phydev, + unsigned int addr_offset, int devad, + u32 regnum, u16 val); + +int phy_package_write_mmd(struct phy_device *phydev, + unsigned int addr_offset, int devad, + u32 regnum, u16 val); + static inline bool __phy_package_set_once(struct phy_device *phydev, unsigned int b) { -- cgit v1.2.3 From cff9c565e65f3622e8dc1dcc21c1520a083dff35 Mon Sep 17 00:00:00 2001 From: Luiz Angelo Daros de Luca Date: Wed, 20 Dec 2023 01:52:29 -0300 Subject: net: mdio: get/put device node during (un)registration The __of_mdiobus_register() function was storing the device node in dev.of_node without increasing its reference count. It implicitly relied on the caller to maintain the allocated node until the mdiobus was unregistered. Now, __of_mdiobus_register() will acquire the node before assigning it, and of_mdiobus_unregister_callback() will be called at the end of mdio_unregister(). Drivers can now release the node immediately after MDIO registration. Some of them are already doing that even before this patch. Signed-off-by: Luiz Angelo Daros de Luca Signed-off-by: David S. Miller --- include/linux/phy.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/phy.h') diff --git a/include/linux/phy.h b/include/linux/phy.h index e9e85d347587..ede891776d8b 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -434,6 +434,9 @@ struct mii_bus { /** @shared: shared state across different PHYs */ struct phy_package_shared *shared[PHY_MAX_ADDR]; + + /** @__unregister_callback: called at the last step of unregistration */ + void (*__unregister_callback)(struct mii_bus *bus); }; #define to_mii_bus(d) container_of(d, struct mii_bus, dev) -- cgit v1.2.3 From 02018c544ef113e980a2349eba89003d6f399d22 Mon Sep 17 00:00:00 2001 From: Maxime Chevallier Date: Thu, 21 Dec 2023 19:00:34 +0100 Subject: net: phy: Introduce ethernet link topology representation Link topologies containing multiple network PHYs attached to the same net_device can be found when using a PHY as a media converter for use with an SFP connector, on which an SFP transceiver containing a PHY can be used. With the current model, the transceiver's PHY can't be used for operations such as cable testing, timestamping, macsec offload, etc. The reason being that most of the logic for these configuration, coming from either ethtool netlink or ioctls tend to use netdev->phydev, which in multi-phy systems will reference the PHY closest to the MAC. Introduce a numbering scheme allowing to enumerate PHY devices that belong to any netdev, which can in turn allow userspace to take more precise decisions with regard to each PHY's configuration. The numbering is maintained per-netdev, in a phy_device_list. The numbering works similarly to a netdevice's ifindex, with identifiers that are only recycled once INT_MAX has been reached. This prevents races that could occur between PHY listing and SFP transceiver removal/insertion. The identifiers are assigned at phy_attach time, as the numbering depends on the netdevice the phy is attached to. Signed-off-by: Maxime Chevallier Signed-off-by: David S. Miller --- include/linux/phy.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux/phy.h') diff --git a/include/linux/phy.h b/include/linux/phy.h index ede891776d8b..ea9416797b89 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -547,6 +547,9 @@ struct macsec_ops; * @drv: Pointer to the driver for this PHY instance * @devlink: Create a link between phy dev and mac dev, if the external phy * used by current mac interface is managed by another mac interface. + * @phyindex: Unique id across the phy's parent tree of phys to address the PHY + * from userspace, similar to ifindex. A zero index means the PHY + * wasn't assigned an id yet. * @phy_id: UID for this device found during discovery * @c45_ids: 802.3-c45 Device Identifiers if is_c45. * @is_c45: Set to true if this PHY uses clause 45 addressing. @@ -646,6 +649,7 @@ struct phy_device { struct device_link *devlink; + u32 phyindex; u32 phy_id; struct phy_c45_device_ids c45_ids; -- cgit v1.2.3 From 034fcc210349b873ece7356905be5c6ca11eef2a Mon Sep 17 00:00:00 2001 From: Maxime Chevallier Date: Thu, 21 Dec 2023 19:00:36 +0100 Subject: net: phy: add helpers to handle sfp phy connect/disconnect There are a few PHY drivers that can handle SFP modules through their sfp_upstream_ops. Introduce Phylib helpers to keep track of connected SFP PHYs in a netdevice's namespace, by adding the SFP PHY to the upstream PHY's netdev's namespace. By doing so, these SFP PHYs can be enumerated and exposed to users, which will be able to use their capabilities. Signed-off-by: Maxime Chevallier Signed-off-by: David S. Miller --- include/linux/phy.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/phy.h') diff --git a/include/linux/phy.h b/include/linux/phy.h index ea9416797b89..ac22b8e28a85 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -1729,6 +1729,8 @@ int phy_suspend(struct phy_device *phydev); int phy_resume(struct phy_device *phydev); int __phy_resume(struct phy_device *phydev); int phy_loopback(struct phy_device *phydev, bool enable); +int phy_sfp_connect_phy(void *upstream, struct phy_device *phy); +void phy_sfp_disconnect_phy(void *upstream, struct phy_device *phy); void phy_sfp_attach(void *upstream, struct sfp_bus *bus); void phy_sfp_detach(void *upstream, struct sfp_bus *bus); int phy_sfp_probe(struct phy_device *phydev, -- cgit v1.2.3 From 3e64db35bc37edbe9e37aaa987df92cde12ddb6c Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Tue, 2 Jan 2024 14:23:34 -0800 Subject: Revert "net: mdio: get/put device node during (un)registration" This reverts commit cff9c565e65f3622e8dc1dcc21c1520a083dff35. Revert based on feedback from Russell. Link: https://lore.kernel.org/all/ZZPtUIRerqTI2%2Fyh@shell.armlinux.org.uk/ Signed-off-by: Jakub Kicinski --- include/linux/phy.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux/phy.h') diff --git a/include/linux/phy.h b/include/linux/phy.h index ac22b8e28a85..6cb9d843aee9 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -434,9 +434,6 @@ struct mii_bus { /** @shared: shared state across different PHYs */ struct phy_package_shared *shared[PHY_MAX_ADDR]; - - /** @__unregister_callback: called at the last step of unregistration */ - void (*__unregister_callback)(struct mii_bus *bus); }; #define to_mii_bus(d) container_of(d, struct mii_bus, dev) -- cgit v1.2.3 From fe1eb24bd5ade085914248c527044e942f75e06a Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Thu, 4 Jan 2024 16:04:35 -0800 Subject: Revert "Introduce PHY listing and link_topology tracking" This reverts commit 32bb4515e34469975abc936deb0a116c4a445817. This reverts commit d078d480639a4f3b5fc2d56247afa38e0956483a. This reverts commit fcc4b105caa4b844bf043375bf799c20a9c99db1. This reverts commit 345237dbc1bdbb274c9fb9ec38976261ff4a40b8. This reverts commit 7db69ec9cfb8b4ab50420262631fb2d1908b25bf. This reverts commit 95132a018f00f5dad38bdcfd4180d1af955d46f6. This reverts commit 63d5eaf35ac36cad00cfb3809d794ef0078c822b. This reverts commit c29451aefcb42359905d18678de38e52eccb3bb5. This reverts commit 2ab0edb505faa9ac90dee1732571390f074e8113. This reverts commit dedd702a35793ab462fce4c737eeba0badf9718e. This reverts commit 034fcc210349b873ece7356905be5c6ca11eef2a. This reverts commit 9c5625f559ad6fe9f6f733c11475bf470e637d34. This reverts commit 02018c544ef113e980a2349eba89003d6f399d22. Looks like we need more time for reviews, and incremental changes will be hard to make sense of. So revert. Link: https://lore.kernel.org/all/ZZP6FV5sXEf+xd58@shell.armlinux.org.uk/ Signed-off-by: Jakub Kicinski --- include/linux/phy.h | 6 ------ 1 file changed, 6 deletions(-) (limited to 'include/linux/phy.h') diff --git a/include/linux/phy.h b/include/linux/phy.h index 6cb9d843aee9..e9e85d347587 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -544,9 +544,6 @@ struct macsec_ops; * @drv: Pointer to the driver for this PHY instance * @devlink: Create a link between phy dev and mac dev, if the external phy * used by current mac interface is managed by another mac interface. - * @phyindex: Unique id across the phy's parent tree of phys to address the PHY - * from userspace, similar to ifindex. A zero index means the PHY - * wasn't assigned an id yet. * @phy_id: UID for this device found during discovery * @c45_ids: 802.3-c45 Device Identifiers if is_c45. * @is_c45: Set to true if this PHY uses clause 45 addressing. @@ -646,7 +643,6 @@ struct phy_device { struct device_link *devlink; - u32 phyindex; u32 phy_id; struct phy_c45_device_ids c45_ids; @@ -1726,8 +1722,6 @@ int phy_suspend(struct phy_device *phydev); int phy_resume(struct phy_device *phydev); int __phy_resume(struct phy_device *phydev); int phy_loopback(struct phy_device *phydev, bool enable); -int phy_sfp_connect_phy(void *upstream, struct phy_device *phy); -void phy_sfp_disconnect_phy(void *upstream, struct phy_device *phy); void phy_sfp_attach(void *upstream, struct sfp_bus *bus); void phy_sfp_detach(void *upstream, struct sfp_bus *bus); int phy_sfp_probe(struct phy_device *phydev, -- cgit v1.2.3