From 804af2cf6e7af31d2e664b54e657dddd9b531dbd Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Wed, 26 Jul 2006 21:39:49 +0100 Subject: [AGPGART] remove private page protection map AGP keeps its own copy of the protection_map, upcoming DRM changes will also require access to this map from modules. Signed-off-by: Hugh Dickins Signed-off-by: Dave Airlie Signed-off-by: Dave Jones --- include/linux/mm.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index 990957e0929f..4fba4560699b 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1012,6 +1012,7 @@ static inline unsigned long vma_pages(struct vm_area_struct *vma) return (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; } +pgprot_t vm_get_page_prot(unsigned long vm_flags); struct vm_area_struct *find_extend_vma(struct mm_struct *, unsigned long addr); struct page *vmalloc_to_page(void *addr); unsigned long vmalloc_to_pfn(void *addr); -- cgit v1.2.3 From 1c57e86d75cf162bdadb3a5fe0cd3f65aa1a9ca3 Mon Sep 17 00:00:00 2001 From: Erich Chen Date: Wed, 12 Jul 2006 08:59:32 -0700 Subject: [SCSI] arcmsr: initial driver, version 1.20.00.13 arcmsr is a driver for the Areca Raid controller, a host based RAID subsystem that speaks SCSI at the firmware level. This patch is quite a clean up over the initial submission with contributions from: Randy Dunlap Christoph Hellwig Matthew Wilcox Adrian Bunk Signed-off-by: Erich Chen Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- include/linux/pci_ids.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index c09396d2c77b..df7b62676d87 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2004,6 +2004,23 @@ #define PCI_DEVICE_ID_ALTIMA_AC9100 0x03ea #define PCI_DEVICE_ID_ALTIMA_AC1003 0x03eb +#define PCI_VENDOR_ID_ARECA 0x17d3 +#define PCI_DEVICE_ID_ARECA_1110 0x1110 +#define PCI_DEVICE_ID_ARECA_1120 0x1120 +#define PCI_DEVICE_ID_ARECA_1130 0x1130 +#define PCI_DEVICE_ID_ARECA_1160 0x1160 +#define PCI_DEVICE_ID_ARECA_1170 0x1170 +#define PCI_DEVICE_ID_ARECA_1210 0x1210 +#define PCI_DEVICE_ID_ARECA_1220 0x1220 +#define PCI_DEVICE_ID_ARECA_1230 0x1230 +#define PCI_DEVICE_ID_ARECA_1260 0x1260 +#define PCI_DEVICE_ID_ARECA_1270 0x1270 +#define PCI_DEVICE_ID_ARECA_1280 0x1280 +#define PCI_DEVICE_ID_ARECA_1380 0x1380 +#define PCI_DEVICE_ID_ARECA_1381 0x1381 +#define PCI_DEVICE_ID_ARECA_1680 0x1680 +#define PCI_DEVICE_ID_ARECA_1681 0x1681 + #define PCI_VENDOR_ID_S2IO 0x17d5 #define PCI_DEVICE_ID_S2IO_WIN 0x5731 #define PCI_DEVICE_ID_S2IO_UNI 0x5831 -- cgit v1.2.3 From 3c5100c1c40cc5e27b4da4a736994c76d93392a0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 26 Jul 2006 16:58:33 +0900 Subject: [PATCH] libata: cosmetic changes to PM functions Unify pm_message_t argument to the new-style @mesg. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index 66c3100c2b94..b9416708bba2 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -676,9 +676,9 @@ extern void ata_std_ports(struct ata_ioports *ioaddr); extern int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, unsigned int n_ports); extern void ata_pci_remove_one (struct pci_dev *pdev); -extern void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t state); +extern void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg); extern void ata_pci_device_do_resume(struct pci_dev *pdev); -extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state); +extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); extern int ata_pci_device_resume(struct pci_dev *pdev); extern int ata_pci_clear_simplex(struct pci_dev *pdev); #endif /* CONFIG_PCI */ @@ -697,7 +697,7 @@ extern int sata_scr_write_flush(struct ata_port *ap, int reg, u32 val); extern int ata_port_online(struct ata_port *ap); extern int ata_port_offline(struct ata_port *ap); extern int ata_scsi_device_resume(struct scsi_device *); -extern int ata_scsi_device_suspend(struct scsi_device *, pm_message_t state); +extern int ata_scsi_device_suspend(struct scsi_device *, pm_message_t mesg); extern int ata_host_set_suspend(struct ata_host_set *host_set, pm_message_t mesg); extern void ata_host_set_resume(struct ata_host_set *host_set); -- cgit v1.2.3 From b03732f006bd1ecee32587ec8235c41af5ad905f Mon Sep 17 00:00:00 2001 From: Brian King Date: Mon, 7 Aug 2006 14:27:10 -0500 Subject: [PATCH] libata: Add ata_host_set_init Add ata_host_set_init in preparation for SAS attached SATA. Signed-off-by: Brian King Signed-off-by: Jeff Garzik --- include/linux/libata.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index b9416708bba2..be15ef5d8d85 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -684,6 +684,8 @@ extern int ata_pci_clear_simplex(struct pci_dev *pdev); #endif /* CONFIG_PCI */ extern int ata_device_add(const struct ata_probe_ent *ent); extern void ata_port_detach(struct ata_port *ap); +extern void ata_host_set_init(struct ata_host_set *, struct device *, + unsigned long, const struct ata_port_operations *); extern void ata_host_set_remove(struct ata_host_set *host_set); extern int ata_scsi_detect(struct scsi_host_template *sht); extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg); -- cgit v1.2.3 From 80289167fd3ebaeb7b2641e69cbec44b61165fe7 Mon Sep 17 00:00:00 2001 From: Brian King Date: Mon, 7 Aug 2006 14:27:31 -0500 Subject: [PATCH] libata: Add support for SATA attachment to SAS adapters The following patch enhances libata to allow SAS device drivers to utilize libata to talk to SATA devices. It introduces some new APIs which allow libata to be used without allocating a virtual scsi host. New APIs: ata_sas_port_alloc - Allocate an ata_port ata_sas_port_init - Initialize an ata_port (probe device, etc) ata_sas_port_destroy - Free an ata_port allocated by ata_sas_port_alloc ata_sas_slave_configure - configure scsi device ata_sas_queuecmd - queue a scsi command, similar to ata_scsi_queuecomand These new APIs can be used either directly by a SAS LLDD or could be used by the SAS transport class. Possible usage for a SAS LLDD would be: scsi_scan_host target_alloc ata_sas_port_alloc slave_alloc ata_sas_port_init slave_configure ata_sas_slave_configure Commands received by the LLDD for SATA devices would call ata_sas_queuecmd. Device teardown would occur with: slave_destroy port_disable target_destroy ata_sas_port_destroy Signed-off-by: Brian King Signed-off-by: Jeff Garzik --- include/linux/libata.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index be15ef5d8d85..cf5eb1da3e32 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -691,6 +691,15 @@ extern int ata_scsi_detect(struct scsi_host_template *sht); extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg); extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)); extern int ata_scsi_release(struct Scsi_Host *host); +extern void ata_sas_port_destroy(struct ata_port *); +extern struct ata_port *ata_sas_port_alloc(struct ata_host_set *, + struct ata_port_info *, struct Scsi_Host *); +extern int ata_sas_port_init(struct ata_port *); +extern int ata_sas_port_start(struct ata_port *ap); +extern void ata_sas_port_stop(struct ata_port *ap); +extern int ata_sas_slave_configure(struct scsi_device *, struct ata_port *); +extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), + struct ata_port *ap); extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc); extern int sata_scr_valid(struct ata_port *ap); extern int sata_scr_read(struct ata_port *ap, int reg, u32 *val); -- cgit v1.2.3 From 2ec7df0457b710d9201f211dbccdbecf0ad38b7e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 10 Aug 2006 16:59:10 +0900 Subject: [PATCH] libata: rework legacy handling to remove much of the cruft Kill host_set->next Fix simplex support Allow per platform setting of IDE legacy bases Some of this can be tidied further later on, in particular all the legacy port gunge belongs as a PCI quirk/PCI header decode to understand the special legacy IDE rules in the PCI spec. Longer term Jeff also wants to move the request_irq/free_irq out of core which will make this even cleaner. tj: folded in three followup patches - ata_piix-fix, broken-arch-fix and fix-new-legacy-handling, and separated per-dev xfermask into separate patch preceding this one. Folded in fixes are... * ata_piix-fix: fix build failure due to host_set->next removal * broken-arch-fix: add missing include/asm-*/libata-portmap.h * fix-new-legacy-handling: * In ata_pci_init_legacy_port(), probe_num was incorrectly incremented during initialization of the secondary port and probe_ent->n_ports was incorrectly fixed to 1. * Both legacy ports ended up having the same hard_port_no. * When printing port information, both legacy ports printed the first irq. Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Tejun Heo --- include/linux/libata.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index cf5eb1da3e32..4504776570e4 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -36,6 +36,8 @@ #include #include +#include + /* * compile-time options: to be removed as soon as all the drivers are * converted to the new debugging mechanism @@ -356,6 +358,7 @@ struct ata_probe_ent { unsigned int udma_mask; unsigned int legacy_mode; unsigned long irq; + unsigned long irq2; unsigned int irq_flags; unsigned long host_flags; unsigned long host_set_flags; @@ -367,6 +370,7 @@ struct ata_host_set { spinlock_t lock; struct device *dev; unsigned long irq; + unsigned long irq2; void __iomem *mmio_base; unsigned int n_ports; void *private_data; @@ -374,7 +378,6 @@ struct ata_host_set { unsigned long flags; int simplex_claimed; /* Keep seperate in case we ever need to do this locked */ - struct ata_host_set *next; /* for legacy mode */ struct ata_port *ports[0]; }; -- cgit v1.2.3 From dd5b06c490de72440ec39f814de99a714a45a1a9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 10 Aug 2006 16:59:12 +0900 Subject: [PATCH] libata: implement dummy port Implement dummy port which can be requested by setting appropriate bit in probe_ent->dummy_port_mask. The dummy port is used as placeholder for stolen legacy port. This allows libata to guarantee that index_of(ap) == ap->port_no == actual_device_port_no, and thus to remove error-prone ap->hard_port_no. As it's used only when one port of a legacy controller is reserved by some other entity (e.g. IDE), the focus is on keeping the added *code* complexity at minimum, so dummy port allocates all libata core resources and acts as a normal port. It just has all dummy port_ops. This patch only implements dummy port. The following patch will make libata use it for stolen legacy ports. Signed-off-by: Tejun Heo --- include/linux/libata.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index 4504776570e4..30bfe8f1666e 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -353,6 +353,7 @@ struct ata_probe_ent { struct ata_ioports port[ATA_MAX_PORTS]; unsigned int n_ports; unsigned int hard_port_no; + unsigned int dummy_port_mask; unsigned int pio_mask; unsigned int mwdma_mask; unsigned int udma_mask; @@ -652,6 +653,8 @@ extern const unsigned long sata_deb_timing_normal[]; extern const unsigned long sata_deb_timing_hotplug[]; extern const unsigned long sata_deb_timing_long[]; +extern const struct ata_port_operations ata_dummy_port_ops; + static inline const unsigned long * sata_ehc_deb_timing(struct ata_eh_context *ehc) { @@ -661,6 +664,11 @@ sata_ehc_deb_timing(struct ata_eh_context *ehc) return sata_deb_timing_normal; } +static inline int ata_port_is_dummy(struct ata_port *ap) +{ + return ap->ops == &ata_dummy_port_ops; +} + extern void ata_port_probe(struct ata_port *); extern void __sata_phy_reset(struct ata_port *ap); extern void sata_phy_reset(struct ata_port *ap); -- cgit v1.2.3 From 4852ba24f647199be797545226c6d325db231937 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 10 Aug 2006 16:59:18 +0900 Subject: [PATCH] libata: kill unused hard_port_no and legacy_mode Kill unused probe_ent/ap->hard_port_no and probe_ent->legacy_mode. Signed-off-by: Tejun Heo --- include/linux/libata.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index 30bfe8f1666e..ed749f778697 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -352,12 +352,10 @@ struct ata_probe_ent { struct scsi_host_template *sht; struct ata_ioports port[ATA_MAX_PORTS]; unsigned int n_ports; - unsigned int hard_port_no; unsigned int dummy_port_mask; unsigned int pio_mask; unsigned int mwdma_mask; unsigned int udma_mask; - unsigned int legacy_mode; unsigned long irq; unsigned long irq2; unsigned int irq_flags; @@ -509,7 +507,6 @@ struct ata_port { unsigned int pflags; /* ATA_PFLAG_xxx */ unsigned int id; /* unique id req'd by scsi midlyr */ unsigned int port_no; /* unique port #; from zero */ - unsigned int hard_port_no; /* hardware port #; from zero */ struct ata_prd *prd; /* our SG list */ dma_addr_t prd_dma; /* and its DMA mapping */ -- cgit v1.2.3 From 8b881b0410de0f72a43e814393abf3a4cb29ebb4 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sun, 11 Jun 2006 09:59:27 -0400 Subject: [ATA] Increase lba48 max-sectors from 200 to 256. Also, moved ATA_MAX_SECTORS and ATA_MAX_SECTORS_LBA48 from linux/libata.h to linux/ata.h, now that they truly reflect the standard (well... mostly; note TODO comment). This changes the performance profile (and potential bug profile) for a bunch of drivers, so be wary. --- include/linux/ata.h | 2 ++ include/linux/libata.h | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ata.h b/include/linux/ata.h index 3671af869696..8d708a3d505b 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -40,6 +40,8 @@ enum { ATA_MAX_DEVICES = 2, /* per bus/port */ ATA_MAX_PRD = 256, /* we could make these 256/256 */ ATA_SECT_SIZE = 512, + ATA_MAX_SECTORS = 256, + ATA_MAX_SECTORS_LBA48 = 65535,/* TODO: 65536? */ ATA_ID_WORDS = 256, ATA_ID_SERNO_OFS = 10, diff --git a/include/linux/libata.h b/include/linux/libata.h index ed749f778697..060da736b3a8 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -114,8 +114,6 @@ enum { /* tag ATA_MAX_QUEUE - 1 is reserved for internal commands */ ATA_MAX_QUEUE = 32, ATA_TAG_INTERNAL = ATA_MAX_QUEUE - 1, - ATA_MAX_SECTORS = 200, /* FIXME */ - ATA_MAX_SECTORS_LBA48 = 65535, ATA_MAX_BUS = 2, ATA_DEF_BUSY_WAIT = 10000, ATA_SHORT_PAUSE = (HZ >> 6) + 1, -- cgit v1.2.3 From b352e57dc3bb5033996adaa67c2f69b795eddd39 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 10 Aug 2006 18:52:12 +0100 Subject: [PATCH] libata: Add CompactFlash support The CFA world has some additional rules and drive modes we need to support for newer expansion cards and on embedded boxes Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- include/linux/ata.h | 20 +++++++++++++++++++- include/linux/libata.h | 4 ++-- 2 files changed, 21 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ata.h b/include/linux/ata.h index 8d708a3d505b..991b858acc30 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -170,12 +170,16 @@ enum { XFER_UDMA_2 = 0x42, XFER_UDMA_1 = 0x41, XFER_UDMA_0 = 0x40, + XFER_MW_DMA_4 = 0x24, /* CFA only */ + XFER_MW_DMA_3 = 0x23, /* CFA only */ XFER_MW_DMA_2 = 0x22, XFER_MW_DMA_1 = 0x21, XFER_MW_DMA_0 = 0x20, XFER_SW_DMA_2 = 0x12, XFER_SW_DMA_1 = 0x11, XFER_SW_DMA_0 = 0x10, + XFER_PIO_6 = 0x0E, /* CFA only */ + XFER_PIO_5 = 0x0D, /* CFA only */ XFER_PIO_4 = 0x0C, XFER_PIO_3 = 0x0B, XFER_PIO_2 = 0x0A, @@ -274,7 +278,6 @@ struct ata_taskfile { }; #define ata_id_is_ata(id) (((id)[0] & (1 << 15)) == 0) -#define ata_id_is_cfa(id) ((id)[0] == 0x848A) #define ata_id_is_sata(id) ((id)[93] == 0) #define ata_id_rahead_enabled(id) ((id)[85] & (1 << 6)) #define ata_id_wcache_enabled(id) ((id)[85] & (1 << 5)) @@ -306,6 +309,9 @@ static inline unsigned int ata_id_major_version(const u16 *id) { unsigned int mver; + if (id[ATA_ID_MAJOR_VER] == 0xFFFF) + return 0; + for (mver = 14; mver >= 1; mver--) if (id[ATA_ID_MAJOR_VER] & (1 << mver)) break; @@ -324,6 +330,18 @@ static inline int ata_id_current_chs_valid(const u16 *id) id[56]; /* sectors in current translation */ } +static inline int ata_id_is_cfa(const u16 *id) +{ + u16 v = id[0]; + if (v == 0x848A) /* Standard CF */ + return 1; + /* Could be CF hiding as standard ATA */ + if (ata_id_major_version(id) >= 3 && id[82] != 0xFFFF && + (id[82] & ( 1 << 2))) + return 1; + return 0; +} + static inline int atapi_cdb_len(const u16 *dev_id) { u16 tmp = dev_id[0] & 0x3; diff --git a/include/linux/libata.h b/include/linux/libata.h index 060da736b3a8..806682603ac5 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -225,8 +225,8 @@ enum { /* encoding various smaller bitmaps into a single * unsigned int bitmap */ - ATA_BITS_PIO = 5, - ATA_BITS_MWDMA = 3, + ATA_BITS_PIO = 7, + ATA_BITS_MWDMA = 5, ATA_BITS_UDMA = 8, ATA_SHIFT_PIO = 0, -- cgit v1.2.3 From cca3974e48607c3775dc73b544a5700b2e37c21a Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 24 Aug 2006 03:19:22 -0400 Subject: libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 39 +++++++++++++++++++-------------------- 1 file changed, 19 insertions(+), 20 deletions(-) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index 806682603ac5..563885cb0995 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -197,7 +197,7 @@ enum { ATA_QCFLAG_EH_SCHEDULED = (1 << 18), /* EH scheduled (obsolete) */ /* host set flags */ - ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host_set only */ + ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host only */ /* various lengths of time */ ATA_TMOUT_BOOT = 30 * HZ, /* heuristic */ @@ -357,13 +357,13 @@ struct ata_probe_ent { unsigned long irq; unsigned long irq2; unsigned int irq_flags; - unsigned long host_flags; - unsigned long host_set_flags; + unsigned long port_flags; + unsigned long _host_flags; void __iomem *mmio_base; void *private_data; }; -struct ata_host_set { +struct ata_host { spinlock_t lock; struct device *dev; unsigned long irq; @@ -420,7 +420,7 @@ struct ata_queued_cmd { void *private_data; }; -struct ata_host_stats { +struct ata_port_stats { unsigned long unhandled_irq; unsigned long idle_irq; unsigned long rw_reqbuf; @@ -498,7 +498,7 @@ struct ata_eh_context { }; struct ata_port { - struct Scsi_Host *host; /* our co-allocated scsi host */ + struct Scsi_Host *scsi_host; /* our co-allocated scsi host */ const struct ata_port_operations *ops; spinlock_t *lock; unsigned long flags; /* ATA_FLAG_xxx */ @@ -523,7 +523,7 @@ struct ata_port { unsigned int hw_sata_spd_limit; unsigned int sata_spd_limit; /* SATA PHY speed limit */ - /* record runtime error info, protected by host_set lock */ + /* record runtime error info, protected by host lock */ struct ata_eh_info eh_info; /* EH context owned by EH */ struct ata_eh_context eh_context; @@ -537,8 +537,8 @@ struct ata_port { unsigned int active_tag; u32 sactive; - struct ata_host_stats stats; - struct ata_host_set *host_set; + struct ata_port_stats stats; + struct ata_host *host; struct device *dev; struct work_struct port_task; @@ -614,7 +614,7 @@ struct ata_port_operations { int (*port_start) (struct ata_port *ap); void (*port_stop) (struct ata_port *ap); - void (*host_stop) (struct ata_host_set *host_set); + void (*host_stop) (struct ata_host *host); void (*bmdma_stop) (struct ata_queued_cmd *qc); u8 (*bmdma_status) (struct ata_port *ap); @@ -622,7 +622,7 @@ struct ata_port_operations { struct ata_port_info { struct scsi_host_template *sht; - unsigned long host_flags; + unsigned long flags; unsigned long pio_mask; unsigned long mwdma_mask; unsigned long udma_mask; @@ -690,15 +690,15 @@ extern int ata_pci_clear_simplex(struct pci_dev *pdev); #endif /* CONFIG_PCI */ extern int ata_device_add(const struct ata_probe_ent *ent); extern void ata_port_detach(struct ata_port *ap); -extern void ata_host_set_init(struct ata_host_set *, struct device *, - unsigned long, const struct ata_port_operations *); -extern void ata_host_set_remove(struct ata_host_set *host_set); +extern void ata_host_init(struct ata_host *, struct device *, + unsigned long, const struct ata_port_operations *); +extern void ata_host_remove(struct ata_host *host); extern int ata_scsi_detect(struct scsi_host_template *sht); extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg); extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)); extern int ata_scsi_release(struct Scsi_Host *host); extern void ata_sas_port_destroy(struct ata_port *); -extern struct ata_port *ata_sas_port_alloc(struct ata_host_set *, +extern struct ata_port *ata_sas_port_alloc(struct ata_host *, struct ata_port_info *, struct Scsi_Host *); extern int ata_sas_port_init(struct ata_port *); extern int ata_sas_port_start(struct ata_port *ap); @@ -715,9 +715,8 @@ extern int ata_port_online(struct ata_port *ap); extern int ata_port_offline(struct ata_port *ap); extern int ata_scsi_device_resume(struct scsi_device *); extern int ata_scsi_device_suspend(struct scsi_device *, pm_message_t mesg); -extern int ata_host_set_suspend(struct ata_host_set *host_set, - pm_message_t mesg); -extern void ata_host_set_resume(struct ata_host_set *host_set); +extern int ata_host_suspend(struct ata_host *host, pm_message_t mesg); +extern void ata_host_resume(struct ata_host *host); extern int ata_ratelimit(void); extern unsigned int ata_busy_sleep(struct ata_port *ap, unsigned long timeout_pat, @@ -742,7 +741,7 @@ extern u8 ata_altstatus(struct ata_port *ap); extern void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf); extern int ata_port_start (struct ata_port *ap); extern void ata_port_stop (struct ata_port *ap); -extern void ata_host_stop (struct ata_host_set *host_set); +extern void ata_host_stop (struct ata_host *host); extern irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs); extern void ata_mmio_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data); @@ -828,7 +827,7 @@ struct pci_bits { unsigned long val; }; -extern void ata_pci_host_stop (struct ata_host_set *host_set); +extern void ata_pci_host_stop (struct ata_host *host); extern struct ata_probe_ent * ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int portmask); extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits); -- cgit v1.2.3 From 669a5db411d85a14f86cd92bc16bf7ab5b8aa235 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 29 Aug 2006 18:12:40 -0400 Subject: [libata] Add a bunch of PATA drivers. The vast majority of drivers and changes are from Alan Cox. Albert Lee contributed and maintains pata_pdc2027x. Adrian Bunk, Andrew Morton, and Tejun Heo contributed various minor fixes and updates. Signed-off-by: Jeff Garzik --- include/linux/libata.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index 563885cb0995..a6d818148ae0 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -46,7 +46,7 @@ #undef ATA_VERBOSE_DEBUG /* yet more debugging output */ #undef ATA_IRQ_TRAP /* define to ack screaming irqs */ #undef ATA_NDEBUG /* define to disable quick runtime checks */ -#undef ATA_ENABLE_PATA /* define to enable PATA support in some +#define ATA_ENABLE_PATA /* define to enable PATA support in some * low-level drivers */ -- cgit v1.2.3 From 187afbed1814ea0851bf30bacbf807217dd7864b Mon Sep 17 00:00:00 2001 From: Jon Masters Date: Mon, 28 Aug 2006 17:08:21 -0500 Subject: [SCSI] MODULE_FIRMWARE for binary firmware(s) Right now, various kernel modules are being migrated over to use request_firmware in order to pull in binary firmware blobs from userland when the module is loaded. This makes sense. However, there is right now little mechanism in place to automatically determine which binary firmware blobs must be included with a kernel in order to satisfy the prerequisites of these drivers. This affects vendors, but also regular users to a certain extent too. The attached patch introduces MODULE_FIRMWARE as a mechanism for advertising that a particular firmware file is to be loaded - it will then show up via modinfo and could be used e.g. when packaging a kernel. Signed-off-by: Jon Masters Comments added in line with all the other MODULE_ tag Signed-off-by: James Bottomley Signed-off-by: Greg Kroah-Hartman --- include/linux/module.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/module.h b/include/linux/module.h index 0dfb794c52d3..d4486cc2e7fe 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -156,6 +156,11 @@ extern struct module __this_module; */ #define MODULE_VERSION(_version) MODULE_INFO(version, _version) +/* Optional firmware file (or files) needed by the module + * format is simply firmware file name. Multiple firmware + * files require multiple MODULE_FIRMWARE() specifiers */ +#define MODULE_FIRMWARE(_firmware) MODULE_INFO(firmware, _firmware) + /* Given an address, look for it in the exception tables */ const struct exception_table_entry *search_exception_tables(unsigned long add); -- cgit v1.2.3 From 9bec2e38527a9f2497b3d976715c672d08d6160d Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 31 Aug 2006 00:02:15 -0400 Subject: [libata] Trim trailing whitespace. --- include/linux/ata.h | 4 ++-- include/linux/libata.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ata.h b/include/linux/ata.h index 991b858acc30..d89441907024 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -320,8 +320,8 @@ static inline unsigned int ata_id_major_version(const u16 *id) static inline int ata_id_current_chs_valid(const u16 *id) { - /* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command - has not been issued to the device then the values of + /* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command + has not been issued to the device then the values of id[54] to id[56] are vendor specific. */ return (id[53] & 0x01) && /* Current translation valid */ id[54] && /* cylinders in current translation */ diff --git a/include/linux/libata.h b/include/linux/libata.h index 563885cb0995..0ddf16c17b93 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -198,7 +198,7 @@ enum { /* host set flags */ ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host only */ - + /* various lengths of time */ ATA_TMOUT_BOOT = 30 * HZ, /* heuristic */ ATA_TMOUT_BOOT_QUICK = 7 * HZ, /* heuristic */ -- cgit v1.2.3 From 492dfb489658dfe4a755fa29dd0e34e9c8bd8fb8 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Wed, 30 Aug 2006 15:48:45 -0400 Subject: [SCSI] block: add support for shared tag maps The current block queue implementation already contains most of the machinery for shared tag maps. The only remaining pieces are a way to allocate and destroy a tag map independently of the queues (so that the maps can be managed on the life cycle of the overseeing entity) Acked-by: Jens Axboe Signed-off-by: James Bottomley --- include/linux/blkdev.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index aafe82788b4e..427b0d61be6c 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -746,6 +746,8 @@ extern void blk_queue_free_tags(request_queue_t *); extern int blk_queue_resize_tags(request_queue_t *, int); extern void blk_queue_invalidate_tags(request_queue_t *); extern long blk_congestion_wait(int rw, long timeout); +extern struct blk_queue_tag *blk_init_tags(int); +extern void blk_free_tags(struct blk_queue_tag *); extern void blk_rq_bio_prep(request_queue_t *, struct request *, struct bio *); extern int blkdev_issue_flush(struct block_device *, sector_t *); -- cgit v1.2.3 From 84314fd4740ad73550c76dee4a9578979d84af48 Mon Sep 17 00:00:00 2001 From: James Smart Date: Fri, 18 Aug 2006 17:30:09 -0400 Subject: [SCSI] SCSI and FC Transport: add netlink support for posting of transport events This patch formally adds support for the posting of FC events via netlink. It is a followup to the original RFC at: http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2 and the initial posting at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2 The patch has been updated to optimize the send path, per the discussions in the initial posting. Per discussions at the Storage Summit and at OLS, we are to use netlink for async events from transports. Also per discussions, to avoid a netlink protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol, which can then be used by all transports. This patch: - Creates new files scsi_netlink.c and scsi_netlink.h, which contains the single and shared definitions for the SCSI Transport. It is tied into the base SCSI subsystem intialization. Contains a single interface routine, scsi_send_transport_event(), for a transport to send an event (via multicast to a protocol specific group). - Creates a new scsi_netlink_fc.h file, which contains the FC netlink event messages - Adds 3 new routines to the fc transport: fc_get_event_number() - to get a FC event # fc_host_post_event() - to send a simple FC event (32 bits of data) fc_host_post_vendor_event() - to send a Vendor unique event, with arbitrary amounts of data. Note: the separation of event number allows for a LLD to send a standard event, followed by vendor-specific data for the event. Note: This patch assumes 2 prior fc transport patches have been installed: http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2 http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2 Sorry - next time I'll do something like making these individual patches of the same posting when I know they'll be posted closely together. Signed-off-by: James Smart Tidy up configuration not to make SCSI always select NET Signed-off-by: James Bottomley --- include/linux/netlink.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netlink.h b/include/linux/netlink.h index 855b44668caa..66411622e06e 100644 --- a/include/linux/netlink.h +++ b/include/linux/netlink.h @@ -21,6 +21,8 @@ #define NETLINK_DNRTMSG 14 /* DECnet routing messages */ #define NETLINK_KOBJECT_UEVENT 15 /* Kernel messages to userspace */ #define NETLINK_GENERIC 16 +/* leave room for NETLINK_DM (DM Events) */ +#define NETLINK_SCSITRANSPORT 18 /* SCSI Transports */ #define MAX_LINKS 32 -- cgit v1.2.3 From 76fd85937097a0c2ec8ab23bf21dc10992d1c398 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 8 Sep 2006 11:16:13 -0700 Subject: [PATCH] ethtool: allow const ethtool_ops The ethtool_ops structure is immutable, it expected to be setup by the driver and is never changed. This patch allows drivers to declare there ethtool_ops structure read-only. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- include/linux/netdevice.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 50a4719512ed..a2e747353367 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -342,7 +342,7 @@ struct net_device /* Instance data managed by the core of Wireless Extensions. */ struct iw_public_data * wireless_data; - struct ethtool_ops *ethtool_ops; + const struct ethtool_ops *ethtool_ops; /* * This marks the end of the "visible" part of the structure. All -- cgit v1.2.3 From fea63e38013ec628ab3f7fddc4c2148064b7910a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 16 Sep 2006 03:04:15 +0900 Subject: [PATCH] libata: fix non-uniform ports handling Non-uniform ports handling got broken while updating libata to handle those in the same host. Only separate irq for the non-uniform secondary port was implemented while all other fields (host flags, transfer mode...) of the secondary port simply shared those of the first. For ata_piix combined mode, which ATM is the only user of non-uniform ports, this causes the secondary port assume the wrong type. This can cause PATA port to use SATA ops, which results in bogus check on PCS and detection failure. This patch adds ata_probe_ent->pinfo2 which points to optional port_info for the secondary port. For the time being, this seems to be the simplest solution. This workaround will be removed together with ata_probe_ent itself after init model is updated to allow more flexibility. Signed-off-by: Tejun Heo Cc: Alan Cox Cc: Nelson A. de Oliveira Signed-off-by: Jeff Garzik --- include/linux/libata.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index 8715305f611f..ff67e7524fe9 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -361,6 +361,14 @@ struct ata_probe_ent { unsigned long _host_flags; void __iomem *mmio_base; void *private_data; + + /* port_info for the secondary port. Together with irq2, it's + * used to implement non-uniform secondary port. Currently, + * the only user is ata_piix combined mode. This workaround + * will be removed together with ata_probe_ent when init model + * is updated. + */ + const struct ata_port_info *pinfo2; }; struct ata_host { -- cgit v1.2.3 From 93590859884784520a1850767f86296abc2cdc6d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 12 Sep 2006 16:55:12 +0100 Subject: [PATCH] libata: improve handling of diagostic fail (and hardware that misreports it) Our ATA probe code checks that a device is not reporting a diagnostic failure during start up. Unfortunately at least one device seems to like doing this - the Gigabyte iRAM. This is only done for the master right now (which is fine for the iRAM as it is SATA), as with PATA some combinations of ATAPI device seem to fool the check into seeing a drive that isn't there if it is applied to the slave. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- include/linux/libata.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index ff67e7524fe9..1ef3d3901b47 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -289,6 +289,11 @@ enum { * most devices. */ ATA_SPINUP_WAIT = 8000, + + /* Horkage types. May be set by libata or controller on drives + (some horkage may be drive/controller pair dependant */ + + ATA_HORKAGE_DIAGNOSTIC = (1 << 0), /* Failed boot diag */ }; enum hsm_task_states { @@ -476,6 +481,7 @@ struct ata_device { /* error history */ struct ata_ering ering; + unsigned int horkage; /* List of broken features */ }; /* Offset into struct ata_device. Fields above it are maintained -- cgit v1.2.3 From 1534c3820c26aca4e2567f97b8add8bea40e7e2b Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 20 Sep 2006 15:58:25 +0200 Subject: [S390] zcrypt adjunct processor bus. Add a bus for the adjunct processor interface. Up to 64 devices can be connect to the ap bus interface, each device with 16 domains. That makes 1024 message queues. The interface is asynchronous, the answer to a message sent to a queue needs to be received at some later point in time. Unfortunately the interface does not provide interrupts when a message reply is pending. So the ap bus needs to implement some fancy polling, each active queue is polled once per 1/HZ second or continuously if an idle cpus exsists and the poll thread is activ (see poll_thread parameter). The ap bus uses the sysfs path /sys/bus/ap and has two bus attributes, ap_domain and config_time. The ap_domain selects one of the 16 domains to be used for this system. This limits the maximum number of ap devices to 64. The config_time attribute contains the number of seconds between two ap bus scans to find new devices. The ap bus uses the modalias entries of the form "ap:tN" to autoload the ap driver for hardware type N. Currently known types are: 3 - PCICC, 4 - PCICA, 5 - PCIXCC, 6 - CEX2A and 7 - CEX2C. Signed-off-by: Cornelia Huck Signed-off-by: Ralph Wuerthner Signed-off-by: Martin Schwidefsky --- include/linux/mod_devicetable.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index f6977708585c..f7ca0b09075d 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -148,6 +148,17 @@ struct ccw_device_id { #define CCW_DEVICE_ID_MATCH_DEVICE_TYPE 0x04 #define CCW_DEVICE_ID_MATCH_DEVICE_MODEL 0x08 +/* s390 AP bus devices */ +struct ap_device_id { + __u16 match_flags; /* which fields to match against */ + __u8 dev_type; /* device type */ + __u8 pad1; + __u32 pad2; + kernel_ulong_t driver_info; +}; + +#define AP_DEVICE_ID_MATCH_DEVICE_TYPE 0x01 + #define PNP_ID_LEN 8 #define PNP_MAX_DEVICES 8 -- cgit v1.2.3 From 799111020c66c41aef621a3b53ad112543754124 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 21 Aug 2006 21:03:52 +1000 Subject: [CRYPTO] api: Fixed crypto_tfm context alignment Previously the __aligned__ attribute was added to the crypto_tfm context member to ensure it is alinged correctly on architectures such as arm. Unfortunately kmalloc does not use the same minimum alignment rules as gcc so this is useless. This patch changes it to use kmalloc's minimum alignment. Signed-off-by: Herbert Xu --- include/linux/crypto.h | 25 +++++++++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/crypto.h b/include/linux/crypto.h index 7f946241b879..cb1e6631b132 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -21,8 +21,9 @@ #include #include #include +#include #include -#include +#include /* * Algorithm masks and types. @@ -61,6 +62,26 @@ #define CRYPTO_DIR_ENCRYPT 1 #define CRYPTO_DIR_DECRYPT 0 +/* + * The macro CRYPTO_MINALIGN_ATTR (along with the void * type in the actual + * declaration) is used to ensure that the crypto_tfm context structure is + * aligned correctly for the given architecture so that there are no alignment + * faults for C data types. In particular, this is required on platforms such + * as arm where pointers are 32-bit aligned but there are data types such as + * u64 which require 64-bit alignment. + */ +#if defined(ARCH_KMALLOC_MINALIGN) +#define CRYPTO_MINALIGN ARCH_KMALLOC_MINALIGN +#elif defined(ARCH_SLAB_MINALIGN) +#define CRYPTO_MINALIGN ARCH_SLAB_MINALIGN +#endif + +#ifdef CRYPTO_MINALIGN +#define CRYPTO_MINALIGN_ATTR __attribute__ ((__aligned__(CRYPTO_MINALIGN))) +#else +#define CRYPTO_MINALIGN_ATTR +#endif + struct scatterlist; struct crypto_tfm; @@ -231,7 +252,7 @@ struct crypto_tfm { struct crypto_alg *__crt_alg; - char __crt_ctx[] __attribute__ ((__aligned__)); + void *__crt_ctx[] CRYPTO_MINALIGN_ATTR; }; /* -- cgit v1.2.3 From 6521f30273fbec65146a0f16de74b7b402b0f7b0 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 6 Aug 2006 20:28:44 +1000 Subject: [CRYPTO] api: Add crypto_alg reference counting Up until now we've relied on module reference counting to ensure that the crypto_alg structures don't disappear from under us. This was good enough as long as each crypto_alg came from exactly one module. However, with parameterised crypto algorithms a crypto_alg object may need two or more modules to operate. This means that we need to count the references to the crypto_alg object directly. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- include/linux/crypto.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/crypto.h b/include/linux/crypto.h index cb1e6631b132..7f57ff8ec975 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -17,6 +17,7 @@ #ifndef _LINUX_CRYPTO_H #define _LINUX_CRYPTO_H +#include #include #include #include @@ -148,6 +149,7 @@ struct crypto_alg { unsigned int cra_alignmask; int cra_priority; + atomic_t cra_refcnt; char cra_name[CRYPTO_MAX_ALG_NAME]; char cra_driver_name[CRYPTO_MAX_ALG_NAME]; @@ -160,6 +162,7 @@ struct crypto_alg { int (*cra_init)(struct crypto_tfm *tfm); void (*cra_exit)(struct crypto_tfm *tfm); + void (*cra_destroy)(struct crypto_alg *alg); struct module *cra_module; }; -- cgit v1.2.3 From 2825982d9d66ebba4b532a07391dfbb357f71c5f Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 6 Aug 2006 21:23:26 +1000 Subject: [CRYPTO] api: Added event notification This patch adds a notifier chain for algorithm/template registration events. This will be used to register compound algorithms such as cbc(aes). In future this will also be passed onto user-space through netlink. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- include/linux/crypto.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/crypto.h b/include/linux/crypto.h index 7f57ff8ec975..3e3e95aff133 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -29,11 +29,13 @@ /* * Algorithm masks and types. */ -#define CRYPTO_ALG_TYPE_MASK 0x000000ff +#define CRYPTO_ALG_TYPE_MASK 0x0000000f #define CRYPTO_ALG_TYPE_CIPHER 0x00000001 #define CRYPTO_ALG_TYPE_DIGEST 0x00000002 #define CRYPTO_ALG_TYPE_COMPRESS 0x00000004 +#define CRYPTO_ALG_LARVAL 0x00000010 + /* * Transform masks and values (for crt_flags). */ -- cgit v1.2.3 From 2b8c19dbdc692e81243a328725a02efb77b144a5 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 21 Sep 2006 11:31:44 +1000 Subject: [CRYPTO] api: Add cryptomgr The cryptomgr module is a simple manager of crypto algorithm instances. It ensures that parameterised algorithms of the type tmpl(alg) (e.g., cbc(aes)) are always created. This is meant to satisfy the needs for most users. For more complex cases such as deeper combinations or multiple parameters, a netlink module will be created which allows arbitrary expressions to be parsed in user-space. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- include/linux/crypto.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/crypto.h b/include/linux/crypto.h index 3e3e95aff133..85f73c381913 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -260,6 +260,15 @@ struct crypto_tfm { void *__crt_ctx[] CRYPTO_MINALIGN_ATTR; }; +enum { + CRYPTOA_UNSPEC, + CRYPTOA_ALG, +}; + +struct crypto_attr_alg { + char name[CRYPTO_MAX_ALG_NAME]; +}; + /* * Transform user interface. */ -- cgit v1.2.3 From 6bfd48096ff8ecabf955958b51ddfa7988eb0a14 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 21 Sep 2006 11:39:29 +1000 Subject: [CRYPTO] api: Added spawns Spawns lock a specific crypto algorithm in place. They can then be used with crypto_spawn_tfm to allocate a tfm for that algorithm. When the base algorithm of a spawn is deregistered, all its spawns will be automatically removed. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- include/linux/crypto.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/crypto.h b/include/linux/crypto.h index 85f73c381913..40a6330abc8d 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -35,6 +35,8 @@ #define CRYPTO_ALG_TYPE_COMPRESS 0x00000004 #define CRYPTO_ALG_LARVAL 0x00000010 +#define CRYPTO_ALG_DEAD 0x00000020 +#define CRYPTO_ALG_DYING 0x00000040 /* * Transform masks and values (for crt_flags). @@ -145,6 +147,8 @@ struct compress_alg { struct crypto_alg { struct list_head cra_list; + struct list_head cra_users; + u32 cra_flags; unsigned int cra_blocksize; unsigned int cra_ctxsize; -- cgit v1.2.3 From b14cdd6704c96474ba5c74b5959487beaa5ee1cd Mon Sep 17 00:00:00 2001 From: Michal Ludvig Date: Sun, 9 Jul 2006 09:02:24 +1000 Subject: [CRYPTO] api: Add missing accessors for new crypto_alg fields Add missing accessors for cra_driver_name and cra_priority. Signed-off-by: Michal Ludvig Signed-off-by: Herbert Xu --- include/linux/crypto.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/crypto.h b/include/linux/crypto.h index 40a6330abc8d..d6e184c876b5 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -297,6 +297,16 @@ static inline const char *crypto_tfm_alg_name(struct crypto_tfm *tfm) return tfm->__crt_alg->cra_name; } +static inline const char *crypto_tfm_alg_driver_name(struct crypto_tfm *tfm) +{ + return tfm->__crt_alg->cra_driver_name; +} + +static inline int crypto_tfm_alg_priority(struct crypto_tfm *tfm) +{ + return tfm->__crt_alg->cra_priority; +} + static inline const char *crypto_tfm_alg_modname(struct crypto_tfm *tfm) { return module_name(tfm->__crt_alg->cra_module); -- cgit v1.2.3 From 560c06ae1ab7c677002ea3b6ac83521bf12ee07d Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 13 Aug 2006 14:16:39 +1000 Subject: [CRYPTO] api: Get rid of flags argument to setkey Now that the tfm is passed directly to setkey instead of the ctx, we no longer need to pass the &tfm->crt_flags pointer. This patch also gets rid of a few unnecessary checks on the key length for ciphers as the cipher layer guarantees that the key length is within the bounds specified by the algorithm. Rather than testing dia_setkey every time, this patch does it only once during crypto_alloc_tfm. The redundant check from crypto_digest_setkey is also removed. Signed-off-by: Herbert Xu --- include/linux/crypto.h | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/crypto.h b/include/linux/crypto.h index d6e184c876b5..053bfab43e8d 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -106,7 +106,7 @@ struct cipher_alg { unsigned int cia_min_keysize; unsigned int cia_max_keysize; int (*cia_setkey)(struct crypto_tfm *tfm, const u8 *key, - unsigned int keylen, u32 *flags); + unsigned int keylen); void (*cia_encrypt)(struct crypto_tfm *tfm, u8 *dst, const u8 *src); void (*cia_decrypt)(struct crypto_tfm *tfm, u8 *dst, const u8 *src); @@ -131,7 +131,7 @@ struct digest_alg { unsigned int len); void (*dia_final)(struct crypto_tfm *tfm, u8 *out); int (*dia_setkey)(struct crypto_tfm *tfm, const u8 *key, - unsigned int keylen, u32 *flags); + unsigned int keylen); }; struct compress_alg { @@ -397,8 +397,6 @@ static inline int crypto_digest_setkey(struct crypto_tfm *tfm, const u8 *key, unsigned int keylen) { BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_DIGEST); - if (tfm->crt_digest.dit_setkey == NULL) - return -ENOSYS; return tfm->crt_digest.dit_setkey(tfm, key, keylen); } -- cgit v1.2.3 From df89820ebd5bbf4f3c6b5f8ee7d9e983107f6a91 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 14 Jul 2006 10:42:27 +1000 Subject: [CRYPTO] cipher: Removed special IV checks for ECB This patch makes IV operations on ECB fail through nocrypt_iv rather than calling BUG(). This is needed to generalise CBC/ECB using the template mechanism. Signed-off-by: Herbert Xu --- include/linux/crypto.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/crypto.h b/include/linux/crypto.h index 053bfab43e8d..dbdfc7c79367 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -422,7 +422,6 @@ static inline int crypto_cipher_encrypt_iv(struct crypto_tfm *tfm, unsigned int nbytes, u8 *iv) { BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER); - BUG_ON(tfm->crt_cipher.cit_mode == CRYPTO_TFM_MODE_ECB); return tfm->crt_cipher.cit_encrypt_iv(tfm, dst, src, nbytes, iv); } @@ -441,7 +440,6 @@ static inline int crypto_cipher_decrypt_iv(struct crypto_tfm *tfm, unsigned int nbytes, u8 *iv) { BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER); - BUG_ON(tfm->crt_cipher.cit_mode == CRYPTO_TFM_MODE_ECB); return tfm->crt_cipher.cit_decrypt_iv(tfm, dst, src, nbytes, iv); } -- cgit v1.2.3 From f3f632d61ae9af85d436706ee8e33af1a7fb9c28 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 6 Aug 2006 23:12:59 +1000 Subject: [CRYPTO] api: Added asynchronous flag This patch adds the asynchronous flag and changes all existing users to only look up algorithms that are synchronous. Signed-off-by: Herbert Xu --- include/linux/crypto.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/crypto.h b/include/linux/crypto.h index dbdfc7c79367..530dc4bf363c 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -37,6 +37,7 @@ #define CRYPTO_ALG_LARVAL 0x00000010 #define CRYPTO_ALG_DEAD 0x00000020 #define CRYPTO_ALG_DYING 0x00000040 +#define CRYPTO_ALG_ASYNC 0x00000080 /* * Transform masks and values (for crt_flags). -- cgit v1.2.3 From 6d7d684d635ac5a345f075015f2c84169c111c6a Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 30 Jul 2006 11:53:01 +1000 Subject: [CRYPTO] api: Added crypto_alloc_base Up until now all crypto transforms have been of the same type, struct crypto_tfm, regardless of whether they are ciphers, digests, or other types. As a result of that, we check the types at run-time before each crypto operation. This is rather cumbersome. We could instead use different C types for each crypto type to ensure that the correct types are used at compile time. That is, we would have crypto_cipher/crypto_digest instead of just crypto_tfm. The appropriate type would then be required for the actual operations such as crypto_digest_digest. Now that we have the type/mask fields when looking up algorithms, it is easy to request for an algorithm of the precise type that the user wants. However, crypto_alloc_tfm currently does not expose these new attributes. This patch introduces the function crypto_alloc_base which will carry these new parameters. It will be renamed to crypto_alloc_tfm once all existing users have been converted. Signed-off-by: Herbert Xu --- include/linux/crypto.h | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-) (limited to 'include/linux') diff --git a/include/linux/crypto.h b/include/linux/crypto.h index 530dc4bf363c..6847ab0ea30e 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -194,8 +194,8 @@ static inline int crypto_alg_available(const char *name, u32 flags) /* * Transforms: user-instantiated objects which encapsulate algorithms - * and core processing logic. Managed via crypto_alloc_tfm() and - * crypto_free_tfm(), as well as the various helpers below. + * and core processing logic. Managed via crypto_alloc_*() and + * crypto_free_*(), as well as the various helpers below. */ struct cipher_tfm { @@ -278,16 +278,8 @@ struct crypto_attr_alg { * Transform user interface. */ -/* - * crypto_alloc_tfm() will first attempt to locate an already loaded algorithm. - * If that fails and the kernel supports dynamically loadable modules, it - * will then attempt to load a module of the same name or alias. A refcount - * is grabbed on the algorithm which is then associated with the new transform. - * - * crypto_free_tfm() frees up the transform and any associated resources, - * then drops the refcount on the associated algorithm. - */ struct crypto_tfm *crypto_alloc_tfm(const char *alg_name, u32 tfm_flags); +struct crypto_tfm *crypto_alloc_base(const char *alg_name, u32 type, u32 mask); void crypto_free_tfm(struct crypto_tfm *tfm); /* -- cgit v1.2.3 From e853c3cfa8cc24869ecd2526e589bcb176bc12e9 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 22 Aug 2006 00:06:54 +1000 Subject: [CRYPTO] api: Added crypto_type support This patch adds the crypto_type structure which will be used for all new crypto algorithm types, beginning with block ciphers. The primary purpose of this abstraction is to allow different crypto_type objects for crypto algorithms of the same type, in particular, there will be a different crypto_type objects for asynchronous algorithms. Signed-off-by: Herbert Xu --- include/linux/crypto.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/crypto.h b/include/linux/crypto.h index 6847ab0ea30e..8e9c407b00d2 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -90,6 +90,7 @@ struct scatterlist; struct crypto_tfm; +struct crypto_type; struct cipher_desc { struct crypto_tfm *tfm; @@ -161,6 +162,8 @@ struct crypto_alg { char cra_name[CRYPTO_MAX_ALG_NAME]; char cra_driver_name[CRYPTO_MAX_ALG_NAME]; + const struct crypto_type *cra_type; + union { struct cipher_alg cipher; struct digest_alg digest; -- cgit v1.2.3 From f28776a369b12f9a03a822a8e1090ed670a41f4f Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 13 Aug 2006 20:58:18 +1000 Subject: [CRYPTO] cipher: Added encrypt_one/decrypt_one This patch adds two new operations for the simple cipher that encrypts or decrypts a single block at a time. This will be the main interface after the existing block operations have moved over to the new block ciphers. It also adds the crypto_cipher type which is currently only used on the new operations but will be extended to setkey as well once existing users have been converted to use block ciphers where applicable. Signed-off-by: Herbert Xu --- include/linux/crypto.h | 96 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 96 insertions(+) (limited to 'include/linux') diff --git a/include/linux/crypto.h b/include/linux/crypto.h index 8e9c407b00d2..fdecee83878c 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -224,6 +224,8 @@ struct cipher_tfm { struct scatterlist *src, unsigned int nbytes, u8 *iv); void (*cit_xor_block)(u8 *dst, const u8 *src); + void (*cit_encrypt_one)(struct crypto_tfm *tfm, u8 *dst, const u8 *src); + void (*cit_decrypt_one)(struct crypto_tfm *tfm, u8 *dst, const u8 *src); }; struct digest_tfm { @@ -268,6 +270,8 @@ struct crypto_tfm { void *__crt_ctx[] CRYPTO_MINALIGN_ATTR; }; +#define crypto_cipher crypto_tfm + enum { CRYPTOA_UNSPEC, CRYPTOA_ALG, @@ -347,6 +351,21 @@ static inline unsigned int crypto_tfm_alg_alignmask(struct crypto_tfm *tfm) return tfm->__crt_alg->cra_alignmask; } +static inline u32 crypto_tfm_get_flags(struct crypto_tfm *tfm) +{ + return tfm->crt_flags; +} + +static inline void crypto_tfm_set_flags(struct crypto_tfm *tfm, u32 flags) +{ + tfm->crt_flags |= flags; +} + +static inline void crypto_tfm_clear_flags(struct crypto_tfm *tfm, u32 flags) +{ + tfm->crt_flags &= ~flags; +} + static inline void *crypto_tfm_ctx(struct crypto_tfm *tfm) { return tfm->__crt_ctx; @@ -361,6 +380,83 @@ static inline unsigned int crypto_tfm_ctx_alignment(void) /* * API wrappers. */ +static inline struct crypto_cipher *__crypto_cipher_cast(struct crypto_tfm *tfm) +{ + return (struct crypto_cipher *)tfm; +} + +static inline struct crypto_cipher *crypto_cipher_cast(struct crypto_tfm *tfm) +{ + BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER); + return __crypto_cipher_cast(tfm); +} + +static inline struct crypto_cipher *crypto_alloc_cipher(const char *alg_name, + u32 type, u32 mask) +{ + type &= ~CRYPTO_ALG_TYPE_MASK; + type |= CRYPTO_ALG_TYPE_CIPHER; + mask |= CRYPTO_ALG_TYPE_MASK; + + return __crypto_cipher_cast(crypto_alloc_base(alg_name, type, mask)); +} + +static inline struct crypto_tfm *crypto_cipher_tfm(struct crypto_cipher *tfm) +{ + return tfm; +} + +static inline void crypto_free_cipher(struct crypto_cipher *tfm) +{ + crypto_free_tfm(crypto_cipher_tfm(tfm)); +} + +static inline struct cipher_tfm *crypto_cipher_crt(struct crypto_cipher *tfm) +{ + return &crypto_cipher_tfm(tfm)->crt_cipher; +} + +static inline unsigned int crypto_cipher_blocksize(struct crypto_cipher *tfm) +{ + return crypto_tfm_alg_blocksize(crypto_cipher_tfm(tfm)); +} + +static inline unsigned int crypto_cipher_alignmask(struct crypto_cipher *tfm) +{ + return crypto_tfm_alg_alignmask(crypto_cipher_tfm(tfm)); +} + +static inline u32 crypto_cipher_get_flags(struct crypto_cipher *tfm) +{ + return crypto_tfm_get_flags(crypto_cipher_tfm(tfm)); +} + +static inline void crypto_cipher_set_flags(struct crypto_cipher *tfm, + u32 flags) +{ + crypto_tfm_set_flags(crypto_cipher_tfm(tfm), flags); +} + +static inline void crypto_cipher_clear_flags(struct crypto_cipher *tfm, + u32 flags) +{ + crypto_tfm_clear_flags(crypto_cipher_tfm(tfm), flags); +} + +static inline void crypto_cipher_encrypt_one(struct crypto_cipher *tfm, + u8 *dst, const u8 *src) +{ + crypto_cipher_crt(tfm)->cit_encrypt_one(crypto_cipher_tfm(tfm), + dst, src); +} + +static inline void crypto_cipher_decrypt_one(struct crypto_cipher *tfm, + u8 *dst, const u8 *src) +{ + crypto_cipher_crt(tfm)->cit_decrypt_one(crypto_cipher_tfm(tfm), + dst, src); +} + static inline void crypto_digest_init(struct crypto_tfm *tfm) { BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_DIGEST); -- cgit v1.2.3 From 5cde0af2a9825dd1edaca233bd9590566579ef21 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 22 Aug 2006 00:07:53 +1000 Subject: [CRYPTO] cipher: Added block cipher type This patch adds the new type of block ciphers. Unlike current cipher algorithms which operate on a single block at a time, block ciphers operate on an arbitrarily long linear area of data. As it is block-based, it will skip any data remaining at the end which cannot form a block. The block cipher has one major difference when compared to the existing block cipher implementation. The sg walking is now performed by the algorithm rather than the cipher mid-layer. This is needed for drivers that directly support sg lists. It also improves performance for all algorithms as it reduces the total number of indirect calls by one. In future the existing cipher algorithm will be converted to only have a single-block interface. This will be done after all existing users have switched over to the new block cipher type. Signed-off-by: Herbert Xu --- include/linux/crypto.h | 179 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 179 insertions(+) (limited to 'include/linux') diff --git a/include/linux/crypto.h b/include/linux/crypto.h index fdecee83878c..5a5466d518e8 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -32,6 +32,7 @@ #define CRYPTO_ALG_TYPE_MASK 0x0000000f #define CRYPTO_ALG_TYPE_CIPHER 0x00000001 #define CRYPTO_ALG_TYPE_DIGEST 0x00000002 +#define CRYPTO_ALG_TYPE_BLKCIPHER 0x00000003 #define CRYPTO_ALG_TYPE_COMPRESS 0x00000004 #define CRYPTO_ALG_LARVAL 0x00000010 @@ -89,9 +90,16 @@ #endif struct scatterlist; +struct crypto_blkcipher; struct crypto_tfm; struct crypto_type; +struct blkcipher_desc { + struct crypto_blkcipher *tfm; + void *info; + u32 flags; +}; + struct cipher_desc { struct crypto_tfm *tfm; void (*crfn)(struct crypto_tfm *tfm, u8 *dst, const u8 *src); @@ -104,6 +112,21 @@ struct cipher_desc { * Algorithms: modular crypto algorithm implementations, managed * via crypto_register_alg() and crypto_unregister_alg(). */ +struct blkcipher_alg { + int (*setkey)(struct crypto_tfm *tfm, const u8 *key, + unsigned int keylen); + int (*encrypt)(struct blkcipher_desc *desc, + struct scatterlist *dst, struct scatterlist *src, + unsigned int nbytes); + int (*decrypt)(struct blkcipher_desc *desc, + struct scatterlist *dst, struct scatterlist *src, + unsigned int nbytes); + + unsigned int min_keysize; + unsig