From d069015e268bcac6c8bd8997b3235f5f977d3ab6 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 19 Nov 2012 15:33:51 +0800 Subject: Introduce THERMAL_TREND_RAISE_FULL and THERMAL_TREND_DROP_FULL These two new thermal_trend types are used to tell the governor that the temeprature is raising/dropping quickly. Thermal cooling governors should handle this situation and make proper decisions, e.g. set cooling state to upper/lower limit directly instead of one step each time. Signed-off-by: Zhang Rui --- include/linux/thermal.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/thermal.h b/include/linux/thermal.h index fe82022478e7..883bcda7e1e4 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -74,6 +74,8 @@ enum thermal_trend { THERMAL_TREND_STABLE, /* temperature is stable */ THERMAL_TREND_RAISING, /* temperature is raising */ THERMAL_TREND_DROPPING, /* temperature is dropping */ + THERMAL_TREND_RAISE_FULL, /* apply highest cooling action */ + THERMAL_TREND_DROP_FULL, /* apply lowest cooling action */ }; /* Events supported by Thermal Netlink */ -- cgit v1.2.3 From 8ab3e6a08a98f7ff18c6814065eb30ba2e000233 Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Wed, 2 Jan 2013 15:29:39 +0000 Subject: thermal: Use thermal zone device id in netlink messages This patch changes the function thermal_generate_netlink_event to receive a thermal zone device instead of a originator id. This way, the messages will always be bound to a thermal zone. Signed-off-by: Eduardo Valentin Reviewed-by: Durgadoss R Signed-off-by: Zhang Rui --- include/linux/thermal.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 883bcda7e1e4..9b78f8c6f773 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -246,9 +246,11 @@ int thermal_register_governor(struct thermal_governor *); void thermal_unregister_governor(struct thermal_governor *); #ifdef CONFIG_NET -extern int thermal_generate_netlink_event(u32 orig, enum events event); +extern int thermal_generate_netlink_event(struct thermal_zone_device *tz, + enum events event); #else -static inline int thermal_generate_netlink_event(u32 orig, enum events event) +static int thermal_generate_netlink_event(struct thermal_zone_device *tz, + enum events event) { return 0; } -- cgit v1.2.3 From e6e238c38bd4d42d5e2cddb2165e1a46e0fb1200 Mon Sep 17 00:00:00 2001 From: Amit Daniel Kachhap Date: Mon, 4 Feb 2013 00:30:15 +0000 Subject: thermal: sysfs: Add a new sysfs node emul_temp for thermal emulation This patch adds support to set the emulated temperature method in thermal zone (sensor). After setting this feature thermal zone may report this temperature and not the actual temperature. The emulation implementation may be based on sensor capability through platform specific handler or pure software emulation if no platform handler defined. This is useful in debugging different temperature threshold and its associated cooling action. Critical threshold's cannot be emulated. Writing 0 on this node should disable emulation. Signed-off-by: Amit Daniel Kachhap Acked-by: Kukjin Kim Signed-off-by: Zhang Rui --- include/linux/thermal.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 9b78f8c6f773..f0bd7f90a90d 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -123,6 +123,7 @@ struct thermal_zone_device_ops { int (*set_trip_hyst) (struct thermal_zone_device *, int, unsigned long); int (*get_crit_temp) (struct thermal_zone_device *, unsigned long *); + int (*set_emul_temp) (struct thermal_zone_device *, unsigned long); int (*get_trend) (struct thermal_zone_device *, int, enum thermal_trend *); int (*notify) (struct thermal_zone_device *, int, @@ -165,6 +166,7 @@ struct thermal_zone_device { int polling_delay; int temperature; int last_temperature; + int emul_temperature; int passive; unsigned int forced_passive; const struct thermal_zone_device_ops *ops; -- cgit v1.2.3 From 4f0a6847815837b63b05fc23878ba391701d8f6a Mon Sep 17 00:00:00 2001 From: Jonghwa Lee Date: Fri, 8 Feb 2013 01:13:06 +0000 Subject: Thermal: exynos: Add support for temperature falling interrupt. This patch introduces using temperature falling interrupt in exynos thermal driver. Former patch, it only use polling way to check whether if system themperature is fallen. However, exynos SOC also provides temperature falling interrupt way to do same things by hw. This feature is not supported in exynos4210. Acked-by: Kukjin Kim Signed-off-by: Jonghwa Lee Signed-off-by: Amit Daniel Kachhap Signed-off-by: Zhang Rui --- include/linux/platform_data/exynos_thermal.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/platform_data/exynos_thermal.h b/include/linux/platform_data/exynos_thermal.h index a7bdb2f63b73..da7e6274b175 100644 --- a/include/linux/platform_data/exynos_thermal.h +++ b/include/linux/platform_data/exynos_thermal.h @@ -53,6 +53,8 @@ struct freq_clip_table { * struct exynos_tmu_platform_data * @threshold: basic temperature for generating interrupt * 25 <= threshold <= 125 [unit: degree Celsius] + * @threshold_falling: differntial value for setting threshold + * of temperature falling interrupt. * @trigger_levels: array for each interrupt levels * [unit: degree Celsius] * 0: temperature for trigger_level0 interrupt @@ -97,6 +99,7 @@ struct freq_clip_table { */ struct exynos_tmu_platform_data { u8 threshold; + u8 threshold_falling; u8 trigger_levels[4]; bool trigger_level0_en; bool trigger_level1_en; -- cgit v1.2.3