From cc7a21b6fbd945f8d8f61422ccd27203c1fafeb7 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <edumazet@google.com>
Date: Fri, 19 Jun 2020 12:02:59 -0700
Subject: ipv6: icmp6: avoid indirect call for icmpv6_send()

If IPv6 is builtin, we do not need an expensive indirect call
to reach icmp6_send().

v2: put inline keyword before the type to avoid sparse warnings.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/icmpv6.h | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

(limited to 'include/linux')

diff --git a/include/linux/icmpv6.h b/include/linux/icmpv6.h
index 33d379602314..1b3371ae8193 100644
--- a/include/linux/icmpv6.h
+++ b/include/linux/icmpv6.h
@@ -13,12 +13,32 @@ static inline struct icmp6hdr *icmp6_hdr(const struct sk_buff *skb)
 #include <linux/netdevice.h>
 
 #if IS_ENABLED(CONFIG_IPV6)
-extern void icmpv6_send(struct sk_buff *skb, u8 type, u8 code, __u32 info);
 
 typedef void ip6_icmp_send_t(struct sk_buff *skb, u8 type, u8 code, __u32 info,
 			     const struct in6_addr *force_saddr);
+#if IS_BUILTIN(CONFIG_IPV6)
+void icmp6_send(struct sk_buff *skb, u8 type, u8 code, __u32 info,
+		const struct in6_addr *force_saddr);
+static inline void icmpv6_send(struct sk_buff *skb, u8 type, u8 code, __u32 info)
+{
+	icmp6_send(skb, type, code, info, NULL);
+}
+static inline int inet6_register_icmp_sender(ip6_icmp_send_t *fn)
+{
+	BUILD_BUG_ON(fn != icmp6_send);
+	return 0;
+}
+static inline int inet6_unregister_icmp_sender(ip6_icmp_send_t *fn)
+{
+	BUILD_BUG_ON(fn != icmp6_send);
+	return 0;
+}
+#else
+extern void icmpv6_send(struct sk_buff *skb, u8 type, u8 code, __u32 info);
 extern int inet6_register_icmp_sender(ip6_icmp_send_t *fn);
 extern int inet6_unregister_icmp_sender(ip6_icmp_send_t *fn);
+#endif
+
 int ip6_err_gen_icmpv6_unreach(struct sk_buff *skb, int nhs, int type,
 			       unsigned int data_len);
 
-- 
cgit v1.2.3


From c746053d275c8b6ff1d713addabf049c9c9a58fc Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Thu, 18 Jun 2020 14:45:58 +0100
Subject: net: phy: add support for probing MMDs >= 8 for devices-in-package

Add support for probing MMDs above 7 for a valid devices-in-package
specifier, but only probe the vendor MMDs for this if they also report
that there the device is present in status register 2.  This avoids
issues where the MMD is implemented, but does not provide IEEE 802.3
compliant registers (such as the MV88X3310 PHY.)

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/phy.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'include/linux')

diff --git a/include/linux/phy.h b/include/linux/phy.h
index 8c05d0fb5c00..abe318387331 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -388,6 +388,8 @@ enum phy_state {
 	PHY_CABLETEST,
 };
 
+#define MDIO_MMD_NUM 32
+
 /**
  * struct phy_c45_device_ids - 802.3-c45 Device Identifiers
  * @devices_in_package: Bit vector of devices present.
-- 
cgit v1.2.3


From 320ed3bf900075614c43499dc01db8d25717b986 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Thu, 18 Jun 2020 14:46:08 +0100
Subject: net: phy: split devices_in_package

We have two competing requirements for the devices_in_package field.
We want to use it as a bit array indicating which MMDs are present, but
we also want to know if the Clause 22 registers are present.

Since "devices in package" is a term used in the 802.3 specification,
keep this as the as-specified values read from the PHY, and introduce
a new member "mmds_present" to indicate which MMDs are actually
present in the PHY, derived from the "devices in package" value.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/phy.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'include/linux')

diff --git a/include/linux/phy.h b/include/linux/phy.h
index abe318387331..19d9e040ad84 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -392,11 +392,13 @@ enum phy_state {
 
 /**
  * struct phy_c45_device_ids - 802.3-c45 Device Identifiers
- * @devices_in_package: Bit vector of devices present.
+ * @devices_in_package: IEEE 802.3 devices in package register value.
+ * @mmds_present: bit vector of MMDs present.
  * @device_ids: The device identifer for each present device.
  */
 struct phy_c45_device_ids {
 	u32 devices_in_package;
+	u32 mmds_present;
 	u32 device_ids[8];
 };
 
-- 
cgit v1.2.3


From 389a338999875b6e7b111096e8b6484434556449 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Thu, 18 Jun 2020 14:46:13 +0100
Subject: net: phy: read MMD ID from all present MMDs

Expand the device_ids[] array to allow all MMD IDs to be read rather
than just the first 8 MMDs, but only read the ID if the MDIO_STAT2
register reports that a device really is present here for these new
devices to maintain compatibility with our current behaviour.  Note
that only a limited number of devices have MDIO_STAT2.

88X3310 PHY vendor MMDs do are marked as present in the
devices_in_package, but do not contain IEE 802.3 compatible register
sets in their lower space.  This avoids reading incorrect values as MMD
identifiers.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/phy.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'include/linux')

diff --git a/include/linux/phy.h b/include/linux/phy.h
index 19d9e040ad84..9248dd2ce4ca 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -399,7 +399,7 @@ enum phy_state {
 struct phy_c45_device_ids {
 	u32 devices_in_package;
 	u32 mmds_present;
-	u32 device_ids[8];
+	u32 device_ids[MDIO_MMD_NUM];
 };
 
 struct macsec_context;
-- 
cgit v1.2.3


From 41c48f3a98231738c5ce79f6f2aa6e40ba924d18 Mon Sep 17 00:00:00 2001
From: Andrey Ignatov <rdna@fb.com>
Date: Fri, 19 Jun 2020 14:11:43 -0700
Subject: bpf: Support access to bpf map fields

There are multiple use-cases when it's convenient to have access to bpf
map fields, both `struct bpf_map` and map type specific struct-s such as
`struct bpf_array`, `struct bpf_htab`, etc.

For example while working with sock arrays it can be necessary to
calculate the key based on map->max_entries (some_hash % max_entries).
Currently this is solved by communicating max_entries via "out-of-band"
channel, e.g. via additional map with known key to get info about target
map. That works, but is not very convenient and error-prone while
working with many maps.

In other cases necessary data is dynamic (i.e. unknown at loading time)
and it's impossible to get it at all. For example while working with a
hash table it can be convenient to know how much capacity is already
used (bpf_htab.count.counter for BPF_F_NO_PREALLOC case).

At the same time kernel knows this info and can provide it to bpf
program.

Fill this gap by adding support to access bpf map fields from bpf
program for both `struct bpf_map` and map type specific fields.

Support is implemented via btf_struct_access() so that a user can define
their own `struct bpf_map` or map type specific struct in their program
with only necessary fields and preserve_access_index attribute, cast a
map to this struct and use a field.

For example:

	struct bpf_map {
		__u32 max_entries;
	} __attribute__((preserve_access_index));

	struct bpf_array {
		struct bpf_map map;
		__u32 elem_size;
	} __attribute__((preserve_access_index));

	struct {
		__uint(type, BPF_MAP_TYPE_ARRAY);
		__uint(max_entries, 4);
		__type(key, __u32);
		__type(value, __u32);
	} m_array SEC(".maps");

	SEC("cgroup_skb/egress")
	int cg_skb(void *ctx)
	{
		struct bpf_array *array = (struct bpf_array *)&m_array;
		struct bpf_map *map = (struct bpf_map *)&m_array;

		/* .. use map->max_entries or array->map.max_entries .. */
	}

Similarly to other btf_struct_access() use-cases (e.g. struct tcp_sock
in net/ipv4/bpf_tcp_ca.c) the patch allows access to any fields of
corresponding struct. Only reading from map fields is supported.

For btf_struct_access() to work there should be a way to know btf id of
a struct that corresponds to a map type. To get btf id there should be a
way to get a stringified name of map-specific struct, such as
"bpf_array", "bpf_htab", etc for a map type. Two new fields are added to
`struct bpf_map_ops` to handle it:
* .map_btf_name keeps a btf name of a struct returned by map_alloc();
* .map_btf_id is used to cache btf id of that struct.

To make btf ids calculation cheaper they're calculated once while
preparing btf_vmlinux and cached same way as it's done for btf_id field
of `struct bpf_func_proto`

While calculating btf ids, struct names are NOT checked for collision.
Collisions will be checked as a part of the work to prepare btf ids used
in verifier in compile time that should land soon. The only known
collision for `struct bpf_htab` (kernel/bpf/hashtab.c vs
net/core/sock_map.c) was fixed earlier.

Both new fields .map_btf_name and .map_btf_id must be set for a map type
for the feature to work. If neither is set for a map type, verifier will
return ENOTSUPP on a try to access map_ptr of corresponding type. If
just one of them set, it's verifier misconfiguration.

Only `struct bpf_array` for BPF_MAP_TYPE_ARRAY and `struct bpf_htab` for
BPF_MAP_TYPE_HASH are supported by this patch. Other map types will be
supported separately.

The feature is available only for CONFIG_DEBUG_INFO_BTF=y and gated by
perfmon_capable() so that unpriv programs won't have access to bpf map
fields.

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/6479686a0cd1e9067993df57b4c3eef0e276fec9.1592600985.git.rdna@fb.com
---
 include/linux/bpf.h          | 9 +++++++++
 include/linux/bpf_verifier.h | 1 +
 2 files changed, 10 insertions(+)

(limited to 'include/linux')

diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index 07052d44bca1..1e1501ee53ce 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -92,6 +92,10 @@ struct bpf_map_ops {
 	int (*map_mmap)(struct bpf_map *map, struct vm_area_struct *vma);
 	__poll_t (*map_poll)(struct bpf_map *map, struct file *filp,
 			     struct poll_table_struct *pts);
+
+	/* BTF name and id of struct allocated by map_alloc */
+	const char * const map_btf_name;
+	int *map_btf_id;
 };
 
 struct bpf_map_memory {
@@ -1109,6 +1113,11 @@ static inline bool bpf_allow_ptr_leaks(void)
 	return perfmon_capable();
 }
 
+static inline bool bpf_allow_ptr_to_map_access(void)
+{
+	return perfmon_capable();
+}
+
 static inline bool bpf_bypass_spec_v1(void)
 {
 	return perfmon_capable();
diff --git a/include/linux/bpf_verifier.h b/include/linux/bpf_verifier.h
index ca08db4ffb5f..53c7bd568c5d 100644
--- a/include/linux/bpf_verifier.h
+++ b/include/linux/bpf_verifier.h
@@ -379,6 +379,7 @@ struct bpf_verifier_env {
 	u32 used_map_cnt;		/* number of used maps */
 	u32 id_gen;			/* used to generate unique reg IDs */
 	bool allow_ptr_leaks;
+	bool allow_ptr_to_map_access;
 	bool bpf_capable;
 	bool bypass_spec_v1;
 	bool bypass_spec_v4;
-- 
cgit v1.2.3


From fa997825ebeca820f4001a9e6d285345d3a535ba Mon Sep 17 00:00:00 2001
From: Parav Pandit <parav@mellanox.com>
Date: Fri, 19 Jun 2020 03:32:50 +0000
Subject: net/mlx5: Constify mac address pointer

Since none of the functions need to modify the input mac address,
constify them.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/mlx5/vport.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'include/linux')

diff --git a/include/linux/mlx5/vport.h b/include/linux/mlx5/vport.h
index 8170da1e9f70..4db87bcfce7b 100644
--- a/include/linux/mlx5/vport.h
+++ b/include/linux/mlx5/vport.h
@@ -75,7 +75,7 @@ void mlx5_query_min_inline(struct mlx5_core_dev *mdev, u8 *min_inline);
 int mlx5_modify_nic_vport_min_inline(struct mlx5_core_dev *mdev,
 				     u16 vport, u8 min_inline);
 int mlx5_modify_nic_vport_mac_address(struct mlx5_core_dev *dev,
-				      u16 vport, u8 *addr);
+				      u16 vport, const u8 *addr);
 int mlx5_query_nic_vport_mtu(struct mlx5_core_dev *mdev, u16 *mtu);
 int mlx5_modify_nic_vport_mtu(struct mlx5_core_dev *mdev, u16 mtu);
 int mlx5_query_nic_vport_system_image_guid(struct mlx5_core_dev *mdev,
-- 
cgit v1.2.3


From a602ea86e9f0d82f5c7ba1d3f7487d4097380b96 Mon Sep 17 00:00:00 2001
From: Maxim Kochetkov <fido_max@inbox.ru>
Date: Sun, 21 Jun 2020 10:59:51 +0300
Subject: net: phy: marvell: Add Marvell 88E1340S support

Add support for this new phy ID.

Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/marvell_phy.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'include/linux')

diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h
index af6b11d4d673..c4390e9cbf15 100644
--- a/include/linux/marvell_phy.h
+++ b/include/linux/marvell_phy.h
@@ -15,6 +15,7 @@
 #define MARVELL_PHY_ID_88E1149R		0x01410e50
 #define MARVELL_PHY_ID_88E1240		0x01410e30
 #define MARVELL_PHY_ID_88E1318S		0x01410e90
+#define MARVELL_PHY_ID_88E1340S		0x01410dc0
 #define MARVELL_PHY_ID_88E1116R		0x01410e40
 #define MARVELL_PHY_ID_88E1510		0x01410dd0
 #define MARVELL_PHY_ID_88E1540		0x01410eb0
-- 
cgit v1.2.3


From f59babf95ef969a18744082ee16e4dfd17743c0b Mon Sep 17 00:00:00 2001
From: Maxim Kochetkov <fido_max@inbox.ru>
Date: Sun, 21 Jun 2020 10:59:52 +0300
Subject: net: phy: marvell: Add Marvell 88E1548P support

Add support for this new phy ID.

Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/marvell_phy.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'include/linux')

diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h
index c4390e9cbf15..ff7b7607c8cf 100644
--- a/include/linux/marvell_phy.h
+++ b/include/linux/marvell_phy.h
@@ -20,6 +20,7 @@
 #define MARVELL_PHY_ID_88E1510		0x01410dd0
 #define MARVELL_PHY_ID_88E1540		0x01410eb0
 #define MARVELL_PHY_ID_88E1545		0x01410ea0
+#define MARVELL_PHY_ID_88E1548P		0x01410ec0
 #define MARVELL_PHY_ID_88E3016		0x01410e60
 #define MARVELL_PHY_ID_88X3310		0x002b09a0
 #define MARVELL_PHY_ID_88E2110		0x002b09b0
-- 
cgit v1.2.3


From d63cc24933c774ea464090af1998a7b63f11c166 Mon Sep 17 00:00:00 2001
From: Maor Gottlieb <maorg@mellanox.com>
Date: Wed, 8 Apr 2020 12:42:09 +0300
Subject: net/mlx5: Export resource dump interface

Export some of the resource dump API. mlx5_ib driver will use
it in downstream patches.

Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
---
 include/linux/mlx5/rsc_dump.h | 48 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)
 create mode 100644 include/linux/mlx5/rsc_dump.h

(limited to 'include/linux')

diff --git a/include/linux/mlx5/rsc_dump.h b/include/linux/mlx5/rsc_dump.h
new file mode 100644
index 000000000000..87415fa754fe
--- /dev/null
+++ b/include/linux/mlx5/rsc_dump.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB */
+/* Copyright (c) 2020 Mellanox Technologies inc. */
+
+#include <linux/mlx5/driver.h>
+
+#ifndef __MLX5_RSC_DUMP
+#define __MLX5_RSC_DUMP
+
+enum mlx5_sgmt_type {
+	MLX5_SGMT_TYPE_HW_CQPC,
+	MLX5_SGMT_TYPE_HW_SQPC,
+	MLX5_SGMT_TYPE_HW_RQPC,
+	MLX5_SGMT_TYPE_FULL_SRQC,
+	MLX5_SGMT_TYPE_FULL_CQC,
+	MLX5_SGMT_TYPE_FULL_EQC,
+	MLX5_SGMT_TYPE_FULL_QPC,
+	MLX5_SGMT_TYPE_SND_BUFF,
+	MLX5_SGMT_TYPE_RCV_BUFF,
+	MLX5_SGMT_TYPE_SRQ_BUFF,
+	MLX5_SGMT_TYPE_CQ_BUFF,
+	MLX5_SGMT_TYPE_EQ_BUFF,
+	MLX5_SGMT_TYPE_SX_SLICE,
+	MLX5_SGMT_TYPE_SX_SLICE_ALL,
+	MLX5_SGMT_TYPE_RDB,
+	MLX5_SGMT_TYPE_RX_SLICE_ALL,
+	MLX5_SGMT_TYPE_MENU,
+	MLX5_SGMT_TYPE_TERMINATE,
+
+	MLX5_SGMT_TYPE_NUM, /* Keep last */
+};
+
+struct mlx5_rsc_key {
+	enum mlx5_sgmt_type rsc;
+	int index1;
+	int index2;
+	int num_of_obj1;
+	int num_of_obj2;
+	int size;
+};
+
+struct mlx5_rsc_dump_cmd;
+
+struct mlx5_rsc_dump_cmd *mlx5_rsc_dump_cmd_create(struct mlx5_core_dev *dev,
+						   struct mlx5_rsc_key *key);
+void mlx5_rsc_dump_cmd_destroy(struct mlx5_rsc_dump_cmd *cmd);
+int mlx5_rsc_dump_next(struct mlx5_core_dev *dev, struct mlx5_rsc_dump_cmd *cmd,
+		       struct page *page, int *size);
+#endif /* __MLX5_RSC_DUMP */
-- 
cgit v1.2.3


From 608ca553c9a2008908120e0e45b1cfc4aefcfd49 Mon Sep 17 00:00:00 2001
From: Maor Gottlieb <maorg@mellanox.com>
Date: Wed, 8 Apr 2020 12:36:20 +0300
Subject: net/mlx5: Add support in query QP, CQ and MKEY segments

Introduce new resource dump segments - PRM_QUERY_QP,
PRM_QUERY_CQ and PRM_QUERY_MKEY. These segments contains the resource
dump in PRM query format.

Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
---
 include/linux/mlx5/rsc_dump.h | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'include/linux')

diff --git a/include/linux/mlx5/rsc_dump.h b/include/linux/mlx5/rsc_dump.h
index 87415fa754fe..d11c0b228620 100644
--- a/include/linux/mlx5/rsc_dump.h
+++ b/include/linux/mlx5/rsc_dump.h
@@ -23,6 +23,9 @@ enum mlx5_sgmt_type {
 	MLX5_SGMT_TYPE_SX_SLICE_ALL,
 	MLX5_SGMT_TYPE_RDB,
 	MLX5_SGMT_TYPE_RX_SLICE_ALL,
+	MLX5_SGMT_TYPE_PRM_QUERY_QP,
+	MLX5_SGMT_TYPE_PRM_QUERY_CQ,
+	MLX5_SGMT_TYPE_PRM_QUERY_MKEY,
 	MLX5_SGMT_TYPE_MENU,
 	MLX5_SGMT_TYPE_TERMINATE,
 
-- 
cgit v1.2.3


From e678e9ddea96590888b034e2a7ad1128bf1ea1ea Mon Sep 17 00:00:00 2001
From: Brian Vazquez <brianvv@google.com>
Date: Tue, 23 Jun 2020 09:42:31 -0700
Subject: indirect_call_wrapper: extend indirect wrapper to support up to 4
 calls

There are many places where 2 annotations are not enough. This patch
adds INDIRECT_CALL_3 and INDIRECT_CALL_4 to cover such cases.

Signed-off-by: Brian Vazquez <brianvv@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/indirect_call_wrapper.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'include/linux')

diff --git a/include/linux/indirect_call_wrapper.h b/include/linux/indirect_call_wrapper.h
index 00d7e8e919c6..54c02c84906a 100644
--- a/include/linux/indirect_call_wrapper.h
+++ b/include/linux/indirect_call_wrapper.h
@@ -23,6 +23,16 @@
 		likely(f == f2) ? f2(__VA_ARGS__) :			\
 				  INDIRECT_CALL_1(f, f1, __VA_ARGS__);	\
 	})
+#define INDIRECT_CALL_3(f, f3, f2, f1, ...)					\
+	({									\
+		likely(f == f3) ? f3(__VA_ARGS__) :				\
+				  INDIRECT_CALL_2(f, f2, f1, __VA_ARGS__);	\
+	})
+#define INDIRECT_CALL_4(f, f4, f3, f2, f1, ...)					\
+	({									\
+		likely(f == f4) ? f4(__VA_ARGS__) :				\
+				  INDIRECT_CALL_3(f, f3, f2, f1, __VA_ARGS__);	\
+	})
 
 #define INDIRECT_CALLABLE_DECLARE(f)	f
 #define INDIRECT_CALLABLE_SCOPE
@@ -30,6 +40,8 @@
 #else
 #define INDIRECT_CALL_1(f, f1, ...) f(__VA_ARGS__)
 #define INDIRECT_CALL_2(f, f2, f1, ...) f(__VA_ARGS__)
+#define INDIRECT_CALL_3(f, f3, f2, f1, ...) f(__VA_ARGS__)
+#define INDIRECT_CALL_4(f, f4, f3, f2, f1, ...) f(__VA_ARGS__)
 #define INDIRECT_CALLABLE_DECLARE(f)
 #define INDIRECT_CALLABLE_SCOPE		static
 #endif
-- 
cgit v1.2.3


From 0cc8fecf041d3e5285380da62cc6662bdc942d8c Mon Sep 17 00:00:00 2001
From: Jeremy Linton <jeremy.linton@arm.com>
Date: Mon, 22 Jun 2020 20:35:32 +0530
Subject: net: phy: Allow mdio buses to auto-probe c45 devices

The mdiobus_scan logic is currently hardcoded to only
work with c22 devices. This works fairly well in most
cases, but its possible that a c45 device doesn't respond
despite being a standard phy. If the parent hardware
is capable, it makes sense to scan for c22 devices before
falling back to c45.

As we want this to reflect the capabilities of the STA,
lets add a field to the mii_bus structure to represent
the capability. That way devices can opt into the extended
scanning. Existing users should continue to default to c22
only scanning as long as they are zero'ing the structure
before use.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/phy.h | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'include/linux')

diff --git a/include/linux/phy.h b/include/linux/phy.h
index 9248dd2ce4ca..7860d56c6bf5 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -298,6 +298,14 @@ struct mii_bus {
 	/* RESET GPIO descriptor pointer */
 	struct gpio_desc *reset_gpiod;
 
+	/* bus capabilities, used for probing */
+	enum {
+		MDIOBUS_NO_CAP = 0,
+		MDIOBUS_C22,
+		MDIOBUS_C45,
+		MDIOBUS_C22_C45,
+	} probe_capabilities;
+
 	/* protect access to the shared element */
 	struct mutex shared_lock;
 
-- 
cgit v1.2.3


From aad4a0a9513af962137c4842463d11ed491eec37 Mon Sep 17 00:00:00 2001
From: Dmitry Yakunin <zeil@yandex-team.ru>
Date: Sat, 20 Jun 2020 18:30:51 +0300
Subject: tcp: Expose tcp_sock_set_keepidle_locked

This is preparation for usage in bpf_setsockopt.

v2:
  - remove redundant EXPORT_SYMBOL (Alexei Starovoitov)

Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200620153052.9439-2-zeil@yandex-team.ru
---
 include/linux/tcp.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'include/linux')

diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index 9aac824c523c..3bdec31ce8f4 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -499,6 +499,7 @@ int tcp_skb_shift(struct sk_buff *to, struct sk_buff *from, int pcount,
 
 void tcp_sock_set_cork(struct sock *sk, bool on);
 int tcp_sock_set_keepcnt(struct sock *sk, int val);
+int tcp_sock_set_keepidle_locked(struct sock *sk, int val);
 int tcp_sock_set_keepidle(struct sock *sk, int val);
 int tcp_sock_set_keepintvl(struct sock *sk, int val);
 void tcp_sock_set_nodelay(struct sock *sk);
-- 
cgit v1.2.3


From 0ef44e5cab8dbf0a0327871b48fe7c8425d0d885 Mon Sep 17 00:00:00 2001
From: Antoine Tenart <antoine.tenart@bootlin.com>
Date: Tue, 23 Jun 2020 16:30:07 +0200
Subject: net: phy: add support for a common probe between shared PHYs

Shared PHYs (PHYs in the same hardware package) may have shared
registers and their drivers would usually need to share information.
There is currently a way to have a shared (part of the) init, by using
phy_package_init_once(). This patch extends the logic to share parts of
the probe to allow sharing the initialization of locks or resources
retrieval.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/phy.h | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/phy.h b/include/linux/phy.h
index 7860d56c6bf5..6fb8f302978d 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -244,7 +244,8 @@ struct phy_package_shared {
 };
 
 /* used as bit number in atomic bitops */
-#define PHY_SHARED_F_INIT_DONE 0
+#define PHY_SHARED_F_INIT_DONE  0
+#define PHY_SHARED_F_PROBE_DONE 1
 
 /*
  * The Bus class for PHYs.  Devices which provide access to
@@ -1566,14 +1567,25 @@ static inline int __phy_package_write(struct phy_device *phydev,
 	return __mdiobus_write(phydev->mdio.bus, shared->addr, regnum, val);
 }
 
-static inline bool phy_package_init_once(struct phy_device *phydev)
+static inline bool __phy_package_set_once(struct phy_device *phydev,
+					  unsigned int b)
 {
 	struct phy_package_shared *shared = phydev->shared;
 
 	if (!shared)
 		return false;
 
-	return !test_and_set_bit(PHY_SHARED_F_INIT_DONE, &shared->flags);
+	return !test_and_set_bit(b, &shared->flags);
+}
+
+static inline bool phy_package_init_once(struct phy_device *phydev)
+{
+	return __phy_package_set_once(phydev, PHY_SHARED_F_INIT_DONE);
+}
+
+static inline bool phy_package_probe_once(struct phy_device *phydev)
+{
+	return __phy_package_set_once(phydev, PHY_SHARED_F_PROBE_DONE);
 }
 
 extern struct bus_type mdio_bus_type;
-- 
cgit v1.2.3


From af7ec13833619e17f03aa73a785a2f871da6d66b Mon Sep 17 00:00:00 2001
From: Yonghong Song <yhs@fb.com>
Date: Tue, 23 Jun 2020 16:08:09 -0700
Subject: bpf: Add bpf_skc_to_tcp6_sock() helper

The helper is used in tracing programs to cast a socket
pointer to a tcp6_sock pointer.
The return value could be NULL if the casting is illegal.

A new helper return type RET_PTR_TO_BTF_ID_OR_NULL is added
so the verifier is able to deduce proper return types for the helper.

Different from the previous BTF_ID based helpers,
the bpf_skc_to_tcp6_sock() argument can be several possible
btf_ids. More specifically, all possible socket data structures
with sock_common appearing in the first in the memory layout.
This patch only added socket types related to tcp and udp.

All possible argument btf_id and return value btf_id
for helper bpf_skc_to_tcp6_sock() are pre-calculcated and
cached. In the future, it is even possible to precompute
these btf_id's at kernel build time.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200623230809.3988195-1-yhs@fb.com
---
 include/linux/bpf.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'include/linux')

diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index 1e1501ee53ce..c0e38ad07848 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -265,6 +265,7 @@ enum bpf_return_type {
 	RET_PTR_TO_TCP_SOCK_OR_NULL,	/* returns a pointer to a tcp_sock or NULL */
 	RET_PTR_TO_SOCK_COMMON_OR_NULL,	/* returns a pointer to a sock_common or NULL */
 	RET_PTR_TO_ALLOC_MEM_OR_NULL,	/* returns a pointer to dynamically allocated memory or NULL */
+	RET_PTR_TO_BTF_ID_OR_NULL,	/* returns a pointer to a btf_id or NULL */
 };
 
 /* eBPF function prototype used by verifier to allow BPF_CALLs from eBPF programs
@@ -287,6 +288,12 @@ struct bpf_func_proto {
 		enum bpf_arg_type arg_type[5];
 	};
 	int *btf_id; /* BTF ids of arguments */
+	bool (*check_btf_id)(u32 btf_id, u32 arg); /* if the argument btf_id is
+						    * valid. Often used if more
+						    * than one btf id is permitted
+						    * for this argument.
+						    */
+	int *ret_btf_id; /* return value btf_id */
 };
 
 /* bpf_context is intentionally undefined structure. Pointer to bpf_context is
@@ -1524,6 +1531,7 @@ static inline bool bpf_map_is_dev_bound(struct bpf_map *map)
 
 struct bpf_map *bpf_map_offload_map_alloc(union bpf_attr *attr);
 void bpf_map_offload_map_free(struct bpf_map *map);
+void init_btf_sock_ids(struct btf *btf);
 #else
 static inline int bpf_prog_offload_init(struct bpf_prog *prog,
 					union bpf_attr *attr)
@@ -1549,6 +1557,9 @@ static inline struct bpf_map *bpf_map_offload_map_alloc(union bpf_attr *attr)
 static inline void bpf_map_offload_map_free(struct bpf_map *map)
 {
 }
+static inline void init_btf_sock_ids(struct btf *btf)
+{
+}
 #endif /* CONFIG_NET && CONFIG_BPF_SYSCALL */
 
 #if defined(CONFIG_BPF_STREAM_PARSER)
@@ -1638,6 +1649,7 @@ extern const struct bpf_func_proto bpf_ringbuf_reserve_proto;
 extern const struct bpf_func_proto bpf_ringbuf_submit_proto;
 extern const struct bpf_func_proto bpf_ringbuf_discard_proto;
 extern const struct bpf_func_proto bpf_ringbuf_query_proto;
+extern const struct bpf_func_proto bpf_skc_to_tcp6_sock_proto;
 
 const struct bpf_func_proto *bpf_tracing_func_proto(
 	enum bpf_func_id func_id, const struct bpf_prog *prog);
-- 
cgit v1.2.3


From 478cfbdf5f13dfe09cfd0b1cbac821f5e27f6108 Mon Sep 17 00:00:00 2001
From: Yonghong Song <yhs@fb.com>
Date: Tue, 23 Jun 2020 16:08:11 -0700
Subject: bpf: Add bpf_skc_to_{tcp, tcp_timewait, tcp_request}_sock() helpers

Three more helpers are added to cast a sock_common pointer to
an tcp_sock, tcp_timewait_sock or a tcp_request_sock for
tracing programs.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200623230811.3988277-1-yhs@fb.com
---
 include/linux/bpf.h | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'include/linux')

diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index c0e38ad07848..c23998cf6699 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -1650,6 +1650,9 @@ extern const struct bpf_func_proto bpf_ringbuf_submit_proto;
 extern const struct bpf_func_proto bpf_ringbuf_discard_proto;
 extern const struct bpf_func_proto bpf_ringbuf_query_proto;
 extern const struct bpf_func_proto bpf_skc_to_tcp6_sock_proto;
+extern const struct bpf_func_proto bpf_skc_to_tcp_sock_proto;
+extern const struct bpf_func_proto bpf_skc_to_tcp_timewait_sock_proto;
+extern const struct bpf_func_proto bpf_skc_to_tcp_request_sock_proto;
 
 const struct bpf_func_proto *bpf_tracing_func_proto(
 	enum bpf_func_id func_id, const struct bpf_prog *prog);
-- 
cgit v1.2.3


From 0d4fad3e57df2bf61e8ffc8d12a34b1caf9b8835 Mon Sep 17 00:00:00 2001
From: Yonghong Song <yhs@fb.com>
Date: Tue, 23 Jun 2020 16:08:15 -0700
Subject: bpf: Add bpf_skc_to_udp6_sock() helper

The helper is used in tracing programs to cast a socket
pointer to a udp6_sock pointer.
The return value could be NULL if the casting is illegal.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/bpf/20200623230815.3988481-1-yhs@fb.com
---
 include/linux/bpf.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'include/linux')

diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index c23998cf6699..3d2ade703a35 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -1653,6 +1653,7 @@ extern const struct bpf_func_proto bpf_skc_to_tcp6_sock_proto;
 extern const struct bpf_func_proto bpf_skc_to_tcp_sock_proto;
 extern const struct bpf_func_proto bpf_skc_to_tcp_timewait_sock_proto;
 extern const struct bpf_func_proto bpf_skc_to_tcp_request_sock_proto;
+extern const struct bpf_func_proto bpf_skc_to_udp6_sock_proto;
 
 const struct bpf_func_proto *bpf_tracing_func_proto(
 	enum bpf_func_id func_id, const struct bpf_prog *prog);
-- 
cgit v1.2.3


From c6d5d843d9b6e8dca3768250970f0d0a1e3d4fb0 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Wed, 24 Jun 2020 11:06:54 +0100
Subject: net: phylink: add phylink_speed_(up|down) interface

Add an interface for the phy_speed_(up|down) functions when a driver
makes use of phylink. These pass the call through to phylib when we
have a normal PHY attached (i.o.w., not a PHY on a SFP module.)

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/phylink.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'include/linux')

diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index cc5b452a184e..b32b8b45421b 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -392,6 +392,8 @@ int phylink_init_eee(struct phylink *, bool);
 int phylink_ethtool_get_eee(struct phylink *, struct ethtool_eee *);
 int phylink_ethtool_set_eee(struct phylink *, struct ethtool_eee *);
 int phylink_mii_ioctl(struct phylink *, struct ifreq *, int);
+int phylink_speed_down(struct phylink *pl, bool sync);
+int phylink_speed_up(struct phylink *pl);
 
 #define phylink_zero(bm) \
 	bitmap_zero(bm, __ETHTOOL_LINK_MODE_MASK_NBITS)
-- 
cgit v1.2.3


From 92252eec913b2dd5e7b5de11ea3efa2e64d65cf4 Mon Sep 17 00:00:00 2001
From: Dan Murphy <dmurphy@ti.com>
Date: Wed, 24 Jun 2020 07:16:02 -0500
Subject: net: phy: Add a helper to return the index for of the internal delay

Add a helper function that will return the index in the array for the
passed in internal delay value.  The helper requires the array, size and
delay value.

The helper will then return the index for the exact match or return the
index for the index to the closest smaller value.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/phy.h | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'include/linux')

diff --git a/include/linux/phy.h b/include/linux/phy.h
index 6fb8f302978d..2c00374dc996 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1443,6 +1443,10 @@ void phy_set_asym_pause(struct phy_device *phydev, bool rx, bool tx);
 bool phy_validate_pause(struct phy_device *phydev,
 			struct ethtool_pauseparam *pp);
 void phy_get_pause(struct phy_device *phydev, bool *tx_pause, bool *rx_pause);
+
+s32 phy_get_internal_delay(struct phy_device *phydev, struct device *dev,
+			   const int *delay_values, int size, bool is_rx);
+
 void phy_resolve_pause(unsigned long *local_adv, unsigned long *partner_adv,
 		       bool *tx_pause, bool *rx_pause);
 
-- 
cgit v1.2.3


From fe21b6c3a65ca74cc4d0909635649bea48b115b3 Mon Sep 17 00:00:00 2001
From: Shiraz Saleem <shiraz.saleem@intel.com>
Date: Mon, 4 May 2020 09:43:48 -0700
Subject: i40e: Move client header location

Move i40e_client.h to include/linux/net/intel/*
since its shared between i40iw and i40e.

Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 include/linux/net/intel/i40e_client.h | 203 ++++++++++++++++++++++++++++++++++
 1 file changed, 203 insertions(+)
 create mode 100644 include/linux/net/intel/i40e_client.h

(limited to 'include/linux')

diff --git a/include/linux/net/intel/i40e_client.h b/include/linux/net/intel/i40e_client.h
new file mode 100644
index 000000000000..72994baf4941
--- /dev/null
+++ b/include/linux/net/intel/i40e_client.h
@@ -0,0 +1,203 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 2013 - 2018 Intel Corporation. */
+
+#ifndef _I40E_CLIENT_H_
+#define _I40E_CLIENT_H_
+
+#define I40E_CLIENT_STR_LENGTH 10
+
+/* Client interface version should be updated anytime there is a change in the
+ * existing APIs or data structures.
+ */
+#define I40E_CLIENT_VERSION_MAJOR 0
+#define I40E_CLIENT_VERSION_MINOR 01
+#define I40E_CLIENT_VERSION_BUILD 00
+#define I40E_CLIENT_VERSION_STR     \
+	__stringify(I40E_CLIENT_VERSION_MAJOR) "." \
+	__stringify(I40E_CLIENT_VERSION_MINOR) "." \
+	__stringify(I40E_CLIENT_VERSION_BUILD)
+
+struct i40e_client_version {
+	u8 major;
+	u8 minor;
+	u8 build;
+	u8 rsvd;
+};
+
+enum i40e_client_state {
+	__I40E_CLIENT_NULL,
+	__I40E_CLIENT_REGISTERED
+};
+
+enum i40e_client_instance_state {
+	__I40E_CLIENT_INSTANCE_NONE,
+	__I40E_CLIENT_INSTANCE_OPENED,
+};
+
+struct i40e_ops;
+struct i40e_client;
+
+/* HW does not define a type value for AEQ; only for RX/TX and CEQ.
+ * In order for us to keep the interface simple, SW will define a
+ * unique type value for AEQ.
+ */
+#define I40E_QUEUE_TYPE_PE_AEQ  0x80
+#define I40E_QUEUE_INVALID_IDX	0xFFFF
+
+struct i40e_qv_info {
+	u32 v_idx; /* msix_vector */
+	u16 ceq_idx;
+	u16 aeq_idx;
+	u8 itr_idx;
+};
+
+struct i40e_qvlist_info {
+	u32 num_vectors;
+	struct i40e_qv_info qv_info[1];
+};
+
+#define I40E_CLIENT_MSIX_ALL 0xFFFFFFFF
+
+/* set of LAN parameters useful for clients managed by LAN */
+
+/* Struct to hold per priority info */
+struct i40e_prio_qos_params {
+	u16 qs_handle; /* qs handle for prio */
+	u8 tc; /* TC mapped to prio */
+	u8 reserved;
+};
+
+#define I40E_CLIENT_MAX_USER_PRIORITY        8
+/* Struct to hold Client QoS */
+struct i40e_qos_params {
+	struct i40e_prio_qos_params prio_qos[I40E_CLIENT_MAX_USER_PRIORITY];
+};
+
+struct i40e_params {
+	struct i40e_qos_params qos;
+	u16 mtu;
+};
+
+/* Structure to hold Lan device info for a client device */
+struct i40e_info {
+	struct i40e_client_version version;
+	u8 lanmac[6];
+	struct net_device *netdev;
+	struct pci_dev *pcidev;
+	u8 __iomem *hw_addr;
+	u8 fid;	/* function id, PF id or VF id */
+#define I40E_CLIENT_FTYPE_PF 0
+#define I40E_CLIENT_FTYPE_VF 1
+	u8 ftype; /* function type, PF or VF */
+	void *pf;
+
+	/* All L2 params that could change during the life span of the PF
+	 * and needs to be communicated to the client when they change
+	 */
+	struct i40e_qvlist_info *qvlist_info;
+	struct i40e_params params;
+	struct i40e_ops *ops;
+
+	u16 msix_count;	 /* number of msix vectors*/
+	/* Array down below will be dynamically allocated based on msix_count */
+	struct msix_entry *msix_entries;
+	u16 itr_index; /* Which ITR index the PE driver is suppose to use */
+	u16 fw_maj_ver;                 /* firmware major version */
+	u16 fw_min_ver;                 /* firmware minor version */
+	u32 fw_build;                   /* firmware build number */
+};
+
+#define I40E_CLIENT_RESET_LEVEL_PF   1
+#define I40E_CLIENT_RESET_LEVEL_CORE 2
+#define I40E_CLIENT_VSI_FLAG_TCP_ENABLE  BIT(1)
+
+struct i40e_ops {
+	/* setup_q_vector_list enables queues with a particular vector */
+	int (*setup_qvlist)(struct i40e_info *ldev, struct i40e_client *client,
+			    struct i40e_qvlist_info *qv_info);
+
+	int (*virtchnl_send)(struct i40e_info *ldev, struct i40e_client *client,
+			     u32 vf_id, u8 *msg, u16 len);
+
+	/* If the PE Engine is unresponsive, RDMA driver can request a reset.
+	 * The level helps determine the level of reset being requested.
+	 */
+	void (*request_reset)(struct i40e_info *ldev,
+			      struct i40e_client *client, u32 level);
+
+	/* API for the RDMA driver to set certain VSI flags that control
+	 * PE Engine.
+	 */
+	int (*update_vsi_ctxt)(struct i40e_info *ldev,
+			       struct i40e_client *client,
+			       bool is_vf, u32 vf_id,
+			       u32 flag, u32 valid_flag);
+};
+
+struct i40e_client_ops {
+	/* Should be called from register_client() or whenever PF is ready
+	 * to create a specific client instance.
+	 */
+	int (*open)(struct i40e_info *ldev, struct i40e_client *client);
+
+	/* Should be called when netdev is unavailable or when unregister
+	 * call comes in. If the close is happenening due to a reset being
+	 * triggered set the reset bit to true.
+	 */
+	void (*close)(struct i40e_info *ldev, struct i40e_client *client,
+		      bool reset);
+
+	/* called when some l2 managed parameters changes - mtu */
+	void (*l2_param_change)(struct i40e_info *ldev,
+				struct i40e_client *client,
+				struct i40e_params *params);
+
+	int (*virtchnl_receive)(struct i40e_info *ldev,
+				struct i40e_client *client, u32 vf_id,
+				u8 *msg, u16 len);
+
+	/* called when a VF is reset by the PF */
+	void (*vf_reset)(struct i40e_info *ldev,
+			 struct i40e_client *client, u32 vf_id);
+
+	/* called when the number of VFs changes */
+	void (*vf_enable)(struct i40e_info *ldev,
+			  struct i40e_client *client, u32 num_vfs);
+
+	/* returns true if VF is capable of specified offload */
+	int (*vf_capable)(struct i40e_info *ldev,
+			  struct i40e_client *client, u32 vf_id);
+};
+
+/* Client device */
+struct i40e_client_instance {
+	struct list_head list;
+	struct i40e_info lan_info;
+	struct i40e_client *client;
+	unsigned long  state;
+};
+
+struct i40e_client {
+	struct list_head list;		/* list of registered clients */
+	char name[I40E_CLIENT_STR_LENGTH];
+	struct i40e_client_version version;
+	unsigned long state;		/* client state */
+	atomic_t ref_cnt;  /* Count of all the client devices of this kind */
+	u32 flags;
+#define I40E_CLIENT_FLAGS_LAUNCH_ON_PROBE	BIT(0)
+#define I40E_TX_FLAGS_NOTIFY_OTHER_EVENTS	BIT(2)
+	u8 type;
+#define I40E_CLIENT_IWARP 0
+	const struct i40e_client_ops *ops; /* client ops provided by the client */
+};
+
+static inline bool i40e_client_is_registered(struct i40e_client *client)
+{
+	return test_bit(__I40E_CLIENT_REGISTERED, &client->state);
+}
+
+/* used by clients */
+int i40e_register_client(struct i40e_client *client);
+int i40e_unregister_client(struct i40e_client *client);
+
+#endif /* _I40E_CLIENT_H_ */
-- 
cgit v1.2.3


From 3c98f9ee6bc280499cbcb6f8e42c001c3bd7caa1 Mon Sep 17 00:00:00 2001
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date: Mon, 6 Jan 2020 16:09:33 -0800
Subject: i40e: remove unused defines

Remove all the unused defines as they are just dead weight.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 include/linux/net/intel/i40e_client.h | 9 ---------
 1 file changed, 9 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/net/intel/i40e_client.h b/include/linux/net/intel/i40e_client.h
index 72994baf4941..f41387a8969f 100644
--- a/include/linux/net/intel/i40e_client.h
+++ b/include/linux/net/intel/i40e_client.h
@@ -37,11 +37,6 @@ enum i40e_client_instance_state {
 struct i40e_ops;
 struct i40e_client;
 
-/* HW does not define a type value for AEQ; only for RX/TX and CEQ.
- * In order for us to keep the interface simple, SW will define a
- * unique type value for AEQ.
- */
-#define I40E_QUEUE_TYPE_PE_AEQ  0x80
 #define I40E_QUEUE_INVALID_IDX	0xFFFF
 
 struct i40e_qv_info {
@@ -56,7 +51,6 @@ struct i40e_qvlist_info {
 	struct i40e_qv_info qv_info[1];
 };
 
-#define I40E_CLIENT_MSIX_ALL 0xFFFFFFFF
 
 /* set of LAN parameters useful for clients managed by LAN */
 
@@ -87,7 +81,6 @@ struct i40e_info {
 	u8 __iomem *hw_addr;
 	u8 fid;	/* function id, PF id or VF id */
 #define I40E_CLIENT_FTYPE_PF 0
-#define I40E_CLIENT_FTYPE_VF 1
 	u8 ftype; /* function type, PF or VF */
 	void *pf;
 
@@ -184,8 +177,6 @@ struct i40e_client {
 	unsigned long state;		/* client state */
 	atomic_t ref_cnt;  /* Count of all the client devices of this kind */
 	u32 flags;
-#define I40E_CLIENT_FLAGS_LAUNCH_ON_PROBE	BIT(0)
-#define I40E_TX_FLAGS_NOTIFY_OTHER_EVENTS	BIT(2)
 	u8 type;
 #define I40E_CLIENT_IWARP 0
 	const struct i40e_client_ops *ops; /* client ops provided by the client */
-- 
cgit v1.2.3


From 333740981f94fa80326cc8e5d2da105f17bc1dd5 Mon Sep 17 00:00:00 2001
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Date: Fri, 26 Jun 2020 17:53:23 +0200
Subject: net: mdio: add a forward declaration for reset_control to mdio.h

This header refers to struct reset_control but doesn't include any reset
header. The structure definition is probably somehow indirectly pulled in
since no warnings are reported but for the sake of correctness add the
forward declaration for struct reset_control.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/mdio.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'include/linux')

diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index 36d2e0673d03..898cbf00332a 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -18,6 +18,7 @@
 
 struct gpio_desc;
 struct mii_bus;
+struct reset_control;
 
 /* Multiple levels of nesting are possible. However typically this is
  * limited to nested DSA like layer, a MUX layer, and the normal
-- 
cgit v1.2.3


From 9205d7b1c1cffa827c23bdbf35e04c7cbe1e1f10 Mon Sep 17 00:00:00 2001
From: Parav Pandit <parav@mellanox.com>
Date: Thu, 25 Jun 2020 22:59:41 -0700
Subject: net/mlx5: Avoid RDMA file inclusion in core driver

mlx5 cq.h does not depend on RDMA verbs.
Remove RDMA verbs file inclusion.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 include/linux/mlx5/cq.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'include/linux')

diff --git a/include/linux/mlx5/cq.h b/include/linux/mlx5/cq.h
index b5a9399e07ee..7bfb67363434 100644
--- a/include/linux/mlx5/cq.h
+++ b/include/linux/mlx5/cq.h
@@ -33,7 +33,6 @@
 #ifndef MLX5_CORE_CQ_H
 #define MLX5_CORE_CQ_H
 
-#include <rdma/ib_verbs.h>
 #include <linux/mlx5/driver.h>
 #include <linux/refcount.h>
 
-- 
cgit v1.2.3


From 2d1b69ed65ee033aa541518cc9f6a815296ac493 Mon Sep 17 00:00:00 2001
From: Tariq Toukan <tariqt@mellanox.com>
Date: Thu, 25 Jun 2020 22:59:43 -0700
Subject: net/mlx5: kTLS, Improve TLS params layout structures

Add explicit WQE segment structures for the TLS static and progress
params.
According to the HW spec, TISN is not part of the progress params context,
take it out of it.
Rename the control segment tisn field as it could hold either a TIS or
a TIR number.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 include/linux/mlx5/device.h   | 9 +++++++++
 include/linux/mlx5/mlx5_ifc.h | 5 +----
 include/linux/mlx5/qp.h       | 2 +-
 3 files changed, 11 insertions(+), 5 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/mlx5/device.h b/include/linux/mlx5/device.h
index 1bc27aca648b..57db125e5802 100644
--- a/include/linux/mlx5/device.h
+++ b/include/linux/mlx5/device.h
@@ -458,6 +458,15 @@ enum {
 	MLX5_OPC_MOD_TLS_TIR_PROGRESS_PARAMS = 0x2,
 };
 
+struct mlx5_wqe_tls_static_params_seg {
+	u8     ctx[MLX5_ST_SZ_BYTES(tls_static_params)];
+};
+
+struct mlx5_wqe_tls_progress_params_seg {
+	__be32 tis_tir_num;
+	u8     ctx[MLX5_ST_SZ_BYTES(tls_progress_params)];
+};
+
 enum {
 	MLX5_SET_PORT_RESET_QKEY	= 0,
 	MLX5_SET_PORT_GUID0		= 16,
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index 116bd9bb347f..a227518c70cf 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -10638,16 +10638,13 @@ struct mlx5_ifc_tls_static_params_bits {
 };
 
 struct mlx5_ifc_tls_progress_params_bits {
-	u8         reserved_at_0[0x8];
-	u8         tisn[0x18];
-
 	u8         next_record_tcp_sn[0x20];
 
 	u8         hw_resync_tcp_sn[0x20];
 
 	u8         record_tracker_state[0x2];
 	u8         auth_state[0x2];
-	u8         reserved_at_64[0x4];
+	u8         reserved_at_44[0x4];
 	u8         hw_offset_record_number[0x18];
 };
 
diff --git a/include/linux/mlx5/qp.h b/include/linux/mlx5/qp.h
index b8992b861ae6..36492a1342cf 100644
--- a/include/linux/mlx5/qp.h
+++ b/include/linux/mlx5/qp.h
@@ -209,7 +209,7 @@ struct mlx5_wqe_ctrl_seg {
 		__be32		general_id;
 		__be32		imm;
 		__be32		umr_mkey;
-		__be32		tisn;
+		__be32		tis_tir_num;
 	};
 };
 
-- 
cgit v1.2.3


From ecc31c60240b9808a274befc5db6b8a249a6ade1 Mon Sep 17 00:00:00 2001
From: Amit Cohen <amitc@mellanox.com>
Date: Mon, 29 Jun 2020 23:46:16 +0300
Subject: ethtool: Add link extended state

Currently, drivers can only tell whether the link is up/down using
LINKSTATE_GET, but no additional information is given.

Add attributes to LINKSTATE_GET command in order to allow drivers
to expose the user more information in addition to link state to ease
the debug process, for example, reason for link down state.

Extended state consists of two attributes - link_ext_state and
link_ext_substate. The idea is to avoid 'vendor specific' states in order
to prevent drivers to use specific link_ext_state that can be in the future
common link_ext_state.

The substates allows drivers to add more information to the common
link_ext_state. For example, vendor can expose 'Autoneg' as link_ext_state
and add 'No partner detected during force mode' as link_ext_substate.

If a driver cannot pinpoint the extended state with the substate
accuracy, it is free to expose only the extended state and omit the
substate attribute.

Signed-off-by: Amit Cohen <amitc@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/ethtool.h | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

(limited to 'include/linux')

diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index a23b26eab479..48ad3b6a0150 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -86,6 +86,22 @@ struct net_device;
 u32 ethtool_op_get_link(struct net_device *dev);
 int ethtool_op_get_ts_info(struct net_device *dev, struct ethtool_ts_info *eti);
 
+
+/**
+ * struct ethtool_link_ext_state_info - link extended state and substate.
+ */
+struct ethtool_link_ext_state_info {
+	enum ethtool_link_ext_state link_ext_state;
+	union {
+		enum ethtool_link_ext_substate_autoneg autoneg;
+		enum ethtool_link_ext_substate_link_training link_training;
+		enum ethtool_link_ext_substate_link_logical_mismatch link_logical_mismatch;
+		enum ethtool_link_ext_substate_bad_signal_integrity bad_signal_integrity;
+		enum ethtool_link_ext_substate_cable_issue cable_issue;
+		u8 __link_ext_substate;
+	};
+};
+
 /**
  * ethtool_rxfh_indir_default - get default value for RX flow hash indirection
  * @index: Index in RX flow hash indirection table
@@ -245,6 +261,11 @@ bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32,
  * @get_link: Report whether physical link is up.  Will only be called if
  *	the netdev is up.  Should usually be set to ethtool_op_get_link(),
  *	which uses netif_carrier_ok().
+ * @get_link_ext_state: Report link extended state. Should set link_ext_state and
+ *	link_ext_substate (link_ext_substate of 0 means link_ext_substate is unknown,
+ *	do not attach ext_substate attribute to netlink message). If link_ext_state
+ *	and link_ext_substate are unknown, return -ENODATA. If not implemented,
+ *	link_ext_state and link_ext_substate will not be sent to userspace.
  * @get_eeprom: Read data from the device EEPROM.
  *	Should fill in the magic field.  Don't need to check len for zero
  *	or wraparound.  Fill in the data argument with the eeprom values
@@ -384,6 +405,8 @@ struct ethtool_ops {
 	void	(*set_msglevel)(struct net_device *, u32);
 	int	(*nway_reset)(struct net_device *);
 	u32	(*get_link)(struct net_device *);
+	int	(*get_link_ext_state)(struct net_device *,
+				      struct ethtool_link_ext_state_info *);
 	int	(*get_eeprom_len)(struct net_device *);
 	int	(*get_eeprom)(struct net_device *,
 			      struct ethtool_eeprom *, u8 *);
-- 
cgit v1.2.3


From ab81e23cf77905896a5e51422eb58e8763507b85 Mon Sep 17 00:00:00 2001
From: Alexander Lobakin <alobakin@marvell.com>
Date: Mon, 29 Jun 2020 14:05:07 +0300
Subject: net: qed: correct existing SPDX tags

QLogic QED drivers source code is dual licensed under
GPL-2.0/BSD-3-Clause.
Correct already existing but wrong SPDX tags to match the actual
license.

Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/qed/fcoe_common.h | 2 +-
 include/linux/qed/qed_fcoe_if.h | 3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/qed/fcoe_common.h b/include/linux/qed/fcoe_common.h
index 98cfc195abe2..a669d7d84284 100644
--- a/include/linux/qed/fcoe_common.h
+++ b/include/linux/qed/fcoe_common.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
 /* QLogic qed NIC Driver
  * Copyright (c) 2015 QLogic Corporation
  */
diff --git a/include/linux/qed/qed_fcoe_if.h b/include/linux/qed/qed_fcoe_if.h
index 46082480a2c3..65d0317ef67e 100644
--- a/include/linux/qed/qed_fcoe_if.h
+++ b/include/linux/qed/qed_fcoe_if.h
@@ -1,4 +1,5 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
+
 #ifndef _QED_FCOE_IF_H
 #define _QED_FCOE_IF_H
 #include <linux/types.h>
-- 
cgit v1.2.3


From 1f4d4ed6acc5b74974fa038e5e9d2e19f3b532f3 Mon Sep 17 00:00:00 2001
From: Alexander Lobakin <alobakin@marvell.com>
Date: Mon, 29 Jun 2020 14:05:08 +0300
Subject: net: qed: convert to SPDX License Identifiers

QLogic QED drivers source code is dual licensed under
GPL-2.0/BSD-3-Clause.
Remove all the boilerplates in the existing code and replace it with the
correct SPDX tag.

Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/qed/common_hsi.h     | 29 +----------------------------
 include/linux/qed/eth_common.h     | 29 +----------------------------
 include/linux/qed/iscsi_common.h   | 29 +----------------------------
 include/linux/qed/iwarp_common.h   | 29 +----------------------------
 include/linux/qed/qed_chain.h      | 29 +----------------------------
 include/linux/qed/qed_eth_if.h     | 29 +----------------------------
 include/linux/qed/qed_if.h         | 29 +----------------------------
 include/linux/qed/qed_iov_if.h     | 29 +----------------------------
 include/linux/qed/qed_iscsi_if.h   | 29 +----------------------------
 include/linux/qed/qed_ll2_if.h     | 29 +----------------------------
 include/linux/qed/qed_rdma_if.h    | 30 ++----------------------------
 include/linux/qed/qede_rdma.h      | 30 ++----------------------------
 include/linux/qed/rdma_common.h    | 29 +----------------------------
 include/linux/qed/roce_common.h    | 29 +----------------------------
 include/linux/qed/storage_common.h | 29 +----------------------------
 include/linux/qed/tcp_common.h     | 29 +----------------------------
 16 files changed, 18 insertions(+), 448 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/qed/common_hsi.h b/include/linux/qed/common_hsi.h
index 2c4737e6694a..294d01eae5cb 100644
--- a/include/linux/qed/common_hsi.h
+++ b/include/linux/qed/common_hsi.h
@@ -1,33 +1,6 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
 /* QLogic qed NIC Driver
  * Copyright (c) 2015-2016  QLogic Corporation
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and /or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
  */
 
 #ifndef _COMMON_HSI_H
diff --git a/include/linux/qed/eth_common.h b/include/linux/qed/eth_common.h
index 95f5fd615852..a9566ef3c2ce 100644
--- a/include/linux/qed/eth_common.h
+++ b/include/linux/qed/eth_common.h
@@ -1,33 +1,6 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
 /* QLogic qed NIC Driver
  * Copyright (c) 2015-2017  QLogic Corporation
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and /or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
  */
 
 #ifndef __ETH_COMMON__
diff --git a/include/linux/qed/iscsi_common.h b/include/linux/qed/iscsi_common.h
index 2f0a771a9176..7ca89fb9247f 100644
--- a/include/linux/qed/iscsi_common.h
+++ b/include/linux/qed/iscsi_common.h
@@ -1,33 +1,6 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
 /* QLogic qed NIC Driver
  * Copyright (c) 2015-2017  QLogic Corporation
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and /or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
  */
 
 #ifndef __ISCSI_COMMON__
diff --git a/include/linux/qed/iwarp_common.h b/include/linux/qed/iwarp_common.h
index c6cfd39cd910..23583e644257 100644
--- a/include/linux/qed/iwarp_common.h
+++ b/include/linux/qed/iwarp_common.h
@@ -1,33 +1,6 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
 /* QLogic qed NIC Driver
  * Copyright (c) 2015-2017  QLogic Corporation
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and /or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
  */
 
 #ifndef __IWARP_COMMON__
diff --git a/include/linux/qed/qed_chain.h b/include/linux/qed/qed_chain.h
index 6d15040c642c..e6e25197f7cb 100644
--- a/include/linux/qed/qed_chain.h
+++ b/include/linux/qed/qed_chain.h
@@ -1,33 +1,6 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
 /* QLogic qed NIC Driver
  * Copyright (c) 2015-2017  QLogic Corporation
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and /or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
  */
 
 #ifndef _QED_CHAIN_H
diff --git a/include/linux/qed/qed_eth_if.h b/include/linux/qed/qed_eth_if.h
index a1310482c4ed..7803dedbcb52 100644
--- a/include/linux/qed/qed_eth_if.h
+++ b/include/linux/qed/qed_eth_if.h
@@ -1,33 +1,6 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
 /* QLogic qed NIC Driver
  * Copyright (c) 2015-2017  QLogic Corporation
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and /or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
  */
 
 #ifndef _QED_ETH_IF_H
diff --git a/include/linux/qed/qed_if.h b/include/linux/qed/qed_if.h
index 8cb76405cbce..4a36608ff3a8 100644
--- a/include/linux/qed/qed_if.h
+++ b/include/linux/qed/qed_if.h
@@ -1,33 +1,6 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
 /* QLogic qed NIC Driver
  * Copyright (c) 2015-2017  QLogic Corporation
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this