From c1bc667e844c2677cdf927102ab384fe7b033762 Mon Sep 17 00:00:00 2001 From: Julius Volz Date: Thu, 7 Aug 2008 16:43:38 +0200 Subject: IPVS: Add genetlink interface definitions to ip_vs.h Add IPVS Generic Netlink interface definitions to include/linux/ip_vs.h. Signed-off-by: Julius Volz Signed-off-by: Simon Horman --- include/linux/ip_vs.h | 160 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 160 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ip_vs.h b/include/linux/ip_vs.h index ec6eb49af2d8..0f434a28fb58 100644 --- a/include/linux/ip_vs.h +++ b/include/linux/ip_vs.h @@ -242,4 +242,164 @@ struct ip_vs_daemon_user { int syncid; }; +/* + * + * IPVS Generic Netlink interface definitions + * + */ + +/* Generic Netlink family info */ + +#define IPVS_GENL_NAME "IPVS" +#define IPVS_GENL_VERSION 0x1 + +struct ip_vs_flags { + __be32 flags; + __be32 mask; +}; + +/* Generic Netlink command attributes */ +enum { + IPVS_CMD_UNSPEC = 0, + + IPVS_CMD_NEW_SERVICE, /* add service */ + IPVS_CMD_SET_SERVICE, /* modify service */ + IPVS_CMD_DEL_SERVICE, /* delete service */ + IPVS_CMD_GET_SERVICE, /* get service info */ + + IPVS_CMD_NEW_DEST, /* add destination */ + IPVS_CMD_SET_DEST, /* modify destination */ + IPVS_CMD_DEL_DEST, /* delete destination */ + IPVS_CMD_GET_DEST, /* get destination info */ + + IPVS_CMD_NEW_DAEMON, /* start sync daemon */ + IPVS_CMD_DEL_DAEMON, /* stop sync daemon */ + IPVS_CMD_GET_DAEMON, /* get sync daemon status */ + + IPVS_CMD_SET_CONFIG, /* set config settings */ + IPVS_CMD_GET_CONFIG, /* get config settings */ + + IPVS_CMD_SET_INFO, /* only used in GET_INFO reply */ + IPVS_CMD_GET_INFO, /* get general IPVS info */ + + IPVS_CMD_ZERO, /* zero all counters and stats */ + IPVS_CMD_FLUSH, /* flush services and dests */ + + __IPVS_CMD_MAX, +}; + +#define IPVS_CMD_MAX (__IPVS_CMD_MAX - 1) + +/* Attributes used in the first level of commands */ +enum { + IPVS_CMD_ATTR_UNSPEC = 0, + IPVS_CMD_ATTR_SERVICE, /* nested service attribute */ + IPVS_CMD_ATTR_DEST, /* nested destination attribute */ + IPVS_CMD_ATTR_DAEMON, /* nested sync daemon attribute */ + IPVS_CMD_ATTR_TIMEOUT_TCP, /* TCP connection timeout */ + IPVS_CMD_ATTR_TIMEOUT_TCP_FIN, /* TCP FIN wait timeout */ + IPVS_CMD_ATTR_TIMEOUT_UDP, /* UDP timeout */ + __IPVS_CMD_ATTR_MAX, +}; + +#define IPVS_CMD_ATTR_MAX (__IPVS_SVC_ATTR_MAX - 1) + +/* + * Attributes used to describe a service + * + * Used inside nested attribute IPVS_CMD_ATTR_SERVICE + */ +enum { + IPVS_SVC_ATTR_UNSPEC = 0, + IPVS_SVC_ATTR_AF, /* address family */ + IPVS_SVC_ATTR_PROTOCOL, /* virtual service protocol */ + IPVS_SVC_ATTR_ADDR, /* virtual service address */ + IPVS_SVC_ATTR_PORT, /* virtual service port */ + IPVS_SVC_ATTR_FWMARK, /* firewall mark of service */ + + IPVS_SVC_ATTR_SCHED_NAME, /* name of scheduler */ + IPVS_SVC_ATTR_FLAGS, /* virtual service flags */ + IPVS_SVC_ATTR_TIMEOUT, /* persistent timeout */ + IPVS_SVC_ATTR_NETMASK, /* persistent netmask */ + + IPVS_SVC_ATTR_STATS, /* nested attribute for service stats */ + __IPVS_SVC_ATTR_MAX, +}; + +#define IPVS_SVC_ATTR_MAX (__IPVS_SVC_ATTR_MAX - 1) + +/* + * Attributes used to describe a destination (real server) + * + * Used inside nested attribute IPVS_CMD_ATTR_DEST + */ +enum { + IPVS_DEST_ATTR_UNSPEC = 0, + IPVS_DEST_ATTR_ADDR, /* real server address */ + IPVS_DEST_ATTR_PORT, /* real server port */ + + IPVS_DEST_ATTR_FWD_METHOD, /* forwarding method */ + IPVS_DEST_ATTR_WEIGHT, /* destination weight */ + + IPVS_DEST_ATTR_U_THRESH, /* upper threshold */ + IPVS_DEST_ATTR_L_THRESH, /* lower threshold */ + + IPVS_DEST_ATTR_ACTIVE_CONNS, /* active connections */ + IPVS_DEST_ATTR_INACT_CONNS, /* inactive connections */ + IPVS_DEST_ATTR_PERSIST_CONNS, /* persistent connections */ + + IPVS_DEST_ATTR_STATS, /* nested attribute for dest stats */ + __IPVS_DEST_ATTR_MAX, +}; + +#define IPVS_DEST_ATTR_MAX (__IPVS_DEST_ATTR_MAX - 1) + +/* + * Attributes describing a sync daemon + * + * Used inside nested attribute IPVS_CMD_ATTR_DAEMON + */ +enum { + IPVS_DAEMON_ATTR_UNSPEC = 0, + IPVS_DAEMON_ATTR_STATE, /* sync daemon state (master/backup) */ + IPVS_DAEMON_ATTR_MCAST_IFN, /* multicast interface name */ + IPVS_DAEMON_ATTR_SYNC_ID, /* SyncID we belong to */ + __IPVS_DAEMON_ATTR_MAX, +}; + +#define IPVS_DAEMON_ATTR_MAX (__IPVS_DAEMON_ATTR_MAX - 1) + +/* + * Attributes used to describe service or destination entry statistics + * + * Used inside nested attributes IPVS_SVC_ATTR_STATS and IPVS_DEST_ATTR_STATS + */ +enum { + IPVS_STATS_ATTR_UNSPEC = 0, + IPVS_STATS_ATTR_CONNS, /* connections scheduled */ + IPVS_STATS_ATTR_INPKTS, /* incoming packets */ + IPVS_STATS_ATTR_OUTPKTS, /* outgoing packets */ + IPVS_STATS_ATTR_INBYTES, /* incoming bytes */ + IPVS_STATS_ATTR_OUTBYTES, /* outgoing bytes */ + + IPVS_STATS_ATTR_CPS, /* current connection rate */ + IPVS_STATS_ATTR_INPPS, /* current in packet rate */ + IPVS_STATS_ATTR_OUTPPS, /* current out packet rate */ + IPVS_STATS_ATTR_INBPS, /* current in byte rate */ + IPVS_STATS_ATTR_OUTBPS, /* current out byte rate */ + __IPVS_STATS_ATTR_MAX, +}; + +#define IPVS_STATS_ATTR_MAX (__IPVS_STATS_ATTR_MAX - 1) + +/* Attributes used in response to IPVS_CMD_GET_INFO command */ +enum { + IPVS_INFO_ATTR_UNSPEC = 0, + IPVS_INFO_ATTR_VERSION, /* IPVS version number */ + IPVS_INFO_ATTR_CONN_TAB_SIZE, /* size of connection hash table */ + __IPVS_INFO_ATTR_MAX, +}; + +#define IPVS_INFO_ATTR_MAX (__IPVS_INFO_ATTR_MAX - 1) + #endif /* _IP_VS_H */ -- cgit v1.2.3 From 9961920199ec88d6b581d3e38502088935925c04 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 2 Aug 2008 15:10:58 -0300 Subject: rfkill: add default global states (v2) Add a second set of global states, "rfkill_default_states", to track the state that will be used when the first rfkill class of a given type is registered, and also to save "undo" information when rfkill_epo is called. Add a new exported function, rfkill_set_default(), which can be used by platform drivers to restore radio state saved by the platform across reboots or shutdown. Also, fix rfkill_epo to properly update rfkill_states, but still preserve a copy of the state so that we can undo the effect of rfkill_epo later if we want to. Add rfkill_restore_states() to restore rfkill_states from the copy. Signed-off-by: Henrique de Moraes Holschuh Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- include/linux/rfkill.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index 741d1a62cc3f..aa3c7d5852f6 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -116,6 +116,7 @@ int rfkill_register(struct rfkill *rfkill); void rfkill_unregister(struct rfkill *rfkill); int rfkill_force_state(struct rfkill *rfkill, enum rfkill_state state); +int rfkill_set_default(enum rfkill_type type, enum rfkill_state state); /** * rfkill_state_complement - return complementar state -- cgit v1.2.3 From 77fba13ccc3a2a3db100892a4a6cc5e2f8290cc7 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 2 Aug 2008 15:10:59 -0300 Subject: rfkill: add __must_check annotations rfkill is not a small, mere detail in wireless support. Once it starts supporting rfkill and users start counting on that support, a wireless device is at risk of operating in dangerous conditions should rfkill support fail to properly activate. Therefore, add the required __must_check annotations on some key functions of the rfkill API, for which the wireless drivers absolutely MUST handle the failure mode safely in order to avoid a potentially dangerous situation where the wireless transmitter is left enabled when the user don't want it to. Signed-off-by: Henrique de Moraes Holschuh Acked-by: Ivo van Doorn Cc: Matthew Garrett Signed-off-by: John W. Linville --- include/linux/rfkill.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index aa3c7d5852f6..e92d8e94bb88 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -110,9 +110,10 @@ struct rfkill { }; #define to_rfkill(d) container_of(d, struct rfkill, dev) -struct rfkill *rfkill_allocate(struct device *parent, enum rfkill_type type); +struct rfkill * __must_check rfkill_allocate(struct device *parent, + enum rfkill_type type); void rfkill_free(struct rfkill *rfkill); -int rfkill_register(struct rfkill *rfkill); +int __must_check rfkill_register(struct rfkill *rfkill); void rfkill_unregister(struct rfkill *rfkill); int rfkill_force_state(struct rfkill *rfkill, enum rfkill_state state); -- cgit v1.2.3 From 96c87607ac8f9b0e641d11ba6e57f8ec0214ea1c Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sat, 2 Aug 2008 15:11:00 -0300 Subject: rfkill: introduce RFKILL_STATE_MAX While it is interesting to not add last-enum-markers because it allows gcc to warn us of switch() statements missing a valid state, we really should be handling memory corruption on a rfkill state with default clauses, anyway. So add RFKILL_STATE_MAX and use it where applicable. It makes for safer code in the long run. Signed-off-by: Henrique de Moraes Holschuh Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- include/linux/rfkill.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index e92d8e94bb88..4cd64b0d9825 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -49,6 +49,7 @@ enum rfkill_state { RFKILL_STATE_SOFT_BLOCKED = 0, /* Radio output blocked */ RFKILL_STATE_UNBLOCKED = 1, /* Radio output allowed */ RFKILL_STATE_HARD_BLOCKED = 2, /* Output blocked, non-overrideable */ + RFKILL_STATE_MAX, /* marker for last valid state */ }; /* -- cgit v1.2.3 From fef1643bf0cdd092a52dc3378479e4811fd65152 Mon Sep 17 00:00:00 2001 From: Jasper Bryant-Greene Date: Sun, 3 Aug 2008 11:30:55 +1200 Subject: move ETH_P_PAE from ieee80211_i.h to if_ether.h ETH_P_PAE belongs in if_ether.h with the other ETH_P_* definitions. This patch moves it there. Signed-off-by: Jasper Bryant-Greene Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/if_ether.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h index e157c1399b61..5028e0b6082b 100644 --- a/include/linux/if_ether.h +++ b/include/linux/if_ether.h @@ -74,6 +74,7 @@ #define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport * over Ethernet */ +#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */ #define ETH_P_AOE 0x88A2 /* ATA over Ethernet */ #define ETH_P_TIPC 0x88CA /* TIPC */ -- cgit v1.2.3 From 9f1ba9062e032fb7b395cd27fc564754fe4e9867 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Thu, 7 Aug 2008 20:07:01 +0300 Subject: mac80211/cfg80211: Add BSS configuration options for AP mode This change adds a new cfg80211 command, NL80211_CMD_SET_BSS, to allow AP mode BSS parameters to be changed from user space (e.g., hostapd). The drivers using mac80211 are expected to be modified with separate changes to use the new BSS info parameter for short slot time in the bss_info_changed() handler. Signed-off-by: Jouni Malinen Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 2be7c63bc0f2..447c02a5190e 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -89,6 +89,8 @@ * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC * or, if no MAC address given, all mesh paths, on the interface identified * by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by + * %NL80211_ATTR_IFINDEX. * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use @@ -127,6 +129,8 @@ enum nl80211_commands { NL80211_CMD_NEW_MPATH, NL80211_CMD_DEL_MPATH, + NL80211_CMD_SET_BSS, + /* add commands here */ /* used to define NL80211_CMD_MAX below */ @@ -134,6 +138,11 @@ enum nl80211_commands { NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1 }; +/* + * Allow user space programs to use #ifdef on new commands by defining them + * here + */ +#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS /** * enum nl80211_attrs - nl80211 netlink attributes @@ -192,6 +201,12 @@ enum nl80211_commands { * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of * &enum nl80211_mntr_flags. * + * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1) + * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled + * (u8, 0 or 1) + * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled + * (u8, 0 or 1) + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -235,6 +250,10 @@ enum nl80211_attrs { NL80211_ATTR_MPATH_NEXT_HOP, NL80211_ATTR_MPATH_INFO, + NL80211_ATTR_BSS_CTS_PROT, + NL80211_ATTR_BSS_SHORT_PREAMBLE, + NL80211_ATTR_BSS_SHORT_SLOT_TIME, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From 18d7c65ba6628d2759bd650e7039d6307f2c99e9 Mon Sep 17 00:00:00 2001 From: Sujith Date: Thu, 14 Aug 2008 13:27:41 +0530 Subject: mac80211: Add an 802.11n definition This patch adds a HT Capability (DSSS/CCK Mode in 40MHz BSS) definition to ieee80211.h Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 7f4df7c7659d..be456450cd2e 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -714,6 +714,7 @@ struct ieee80211_ht_addt_info { #define IEEE80211_HT_CAP_SGI_40 0x0040 #define IEEE80211_HT_CAP_DELAY_BA 0x0400 #define IEEE80211_HT_CAP_MAX_AMSDU 0x0800 +#define IEEE80211_HT_CAP_DSSSCCK40 0x1000 /* 802.11n HT capability AMPDU settings */ #define IEEE80211_HT_CAP_AMPDU_FACTOR 0x03 #define IEEE80211_HT_CAP_AMPDU_DENSITY 0x1C -- cgit v1.2.3 From 095f695cbb07281682462da0618fffabb499d0be Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Tue, 19 Aug 2008 12:50:31 -0500 Subject: ssb: Update for Rev. 5 SPROM Although a revision 5 SPROM has not been seen in the wild, the open-source portion of the MIPS driver 4.150.10.5 describes its layout, which is mostly inherited from revision 4. This patch implements the differences. Signed-off-by: Larry Finger Acked-by: Michael Buesch Signed-off-by: John W. Linville --- include/linux/ssb/ssb_regs.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index ebad0bac9801..271bb4b6446e 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -316,6 +316,21 @@ #define SSB_SPROM4_PA1B1 0x1090 #define SSB_SPROM4_PA1B2 0x1092 +/* SPROM Revision 5 (inherits most data from rev 4) */ +#define SSB_SPROM5_BFLLO 0x104A /* Boardflags (low 16 bits) */ +#define SSB_SPROM5_BFLHI 0x104C /* Board Flags Hi */ +#define SSB_SPROM5_IL0MAC 0x1052 /* 6 byte MAC address for a/b/g/n */ +#define SSB_SPROM5_CCODE 0x1044 /* Country Code (2 bytes) */ +#define SSB_SPROM5_GPIOA 0x1076 /* Gen. Purpose IO # 0 and 1 */ +#define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */ +#define SSB_SPROM5_GPIOA_P1 0xFF00 /* Pin 1 */ +#define SSB_SPROM5_GPIOA_P1_SHIFT 8 +#define SSB_SPROM5_GPIOB 0x1078 /* Gen. Purpose IO # 2 and 3 */ +#define SSB_SPROM5_GPIOB_P2 0x00FF /* Pin 2 */ +#define SSB_SPROM5_GPIOB_P3 0xFF00 /* Pin 3 */ +#define SSB_SPROM5_GPIOB_P3_SHIFT 8 + + /* Values for SSB_SPROM1_BINF_CCODE */ enum { SSB_SPROM1CCODE_WORLD = 0, -- cgit v1.2.3 From 31ce12fb3ebf88b054deb99ad729e84888bf6125 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 20 Aug 2008 17:45:06 -0500 Subject: ssb: Clean up extraction of MAC addresses from SPROM Only rev 1 and 2 ssb SPROMs have fields named et0mac and et1mac; however, all of the extraction routines extract pseudo data for these fields from regions that are all 1's resulting in a hardware address of FF:FF:FF:FF:FF:FF. This patch forces such a fill at the beginning of the data extraction process, and only does the formal extraction if the SPROM rev is 1 or 2. Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- include/linux/ssb/ssb_regs.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index 271bb4b6446e..99a0f991e850 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -245,8 +245,6 @@ /* SPROM Revision 3 (inherits most data from rev 2) */ #define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */ -#define SSB_SPROM3_ET0MAC 0x1050 /* 6 bytes MAC address for Ethernet ?? */ -#define SSB_SPROM3_ET1MAC 0x1050 /* 6 bytes MAC address for 802.11a ?? */ #define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */ #define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */ #define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */ @@ -267,8 +265,6 @@ /* SPROM Revision 4 */ #define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */ -#define SSB_SPROM4_ET0MAC 0x1018 /* 6 bytes MAC address for Ethernet ?? */ -#define SSB_SPROM4_ET1MAC 0x1018 /* 6 bytes MAC address for 802.11a ?? */ #define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */ #define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ #define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ -- cgit v1.2.3 From 36aedc903ea11a4188de0a118d26c9f20afdd272 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Mon, 25 Aug 2008 11:58:58 +0300 Subject: mac80211/cfg80211: HT capabilities for NEW_STA Allow userspace (e.g., hostapd) to set HT capabilities for associated STAs. This is based on a patch from Zhu Yi (only the NL80211_ATTR_HT_CAPABILITY for NEW_STA part is included here). Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- include/linux/nl80211.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 447c02a5190e..0c1147de3ec7 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -207,6 +207,9 @@ enum nl80211_commands { * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled * (u8, 0 or 1) * + * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION) + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -254,16 +257,25 @@ enum nl80211_attrs { NL80211_ATTR_BSS_SHORT_PREAMBLE, NL80211_ATTR_BSS_SHORT_SLOT_TIME, + NL80211_ATTR_HT_CAPABILITY, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 }; +/* + * Allow user space programs to use #ifdef on new attributes by defining them + * here + */ +#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY + #define NL80211_MAX_SUPP_RATES 32 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 +#define NL80211_HT_CAPABILITY_LEN 26 /** * enum nl80211_iftype - (virtual) interface types -- cgit v1.2.3 From b4eec206370b7154dc354dc30f0a3f02ea8468b2 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Thu, 4 Sep 2008 07:30:19 +0200 Subject: dccp: Implement lookup table for feature-negotiation information A lookup table for feature-negotiation information, extracted from RFC 4340/42, is provided by this patch. All currently known features can be found in this table, along with their feature location, their default value, and type. Signed-off-by: Gerrit Renker Acked-by: Ian McDonald --- include/linux/dccp.h | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 6080449fbec9..3978aff197d9 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -176,19 +176,20 @@ enum { }; /* DCCP features (RFC 4340 section 6.4) */ -enum { +enum dccp_feature_numbers { DCCPF_RESERVED = 0, DCCPF_CCID = 1, - DCCPF_SHORT_SEQNOS = 2, /* XXX: not yet implemented */ + DCCPF_SHORT_SEQNOS = 2, DCCPF_SEQUENCE_WINDOW = 3, - DCCPF_ECN_INCAPABLE = 4, /* XXX: not yet implemented */ + DCCPF_ECN_INCAPABLE = 4, DCCPF_ACK_RATIO = 5, DCCPF_SEND_ACK_VECTOR = 6, DCCPF_SEND_NDP_COUNT = 7, DCCPF_MIN_CSUM_COVER = 8, - DCCPF_DATA_CHECKSUM = 9, /* XXX: not yet implemented */ + DCCPF_DATA_CHECKSUM = 9, /* 10-127 reserved */ DCCPF_MIN_CCID_SPECIFIC = 128, + DCCPF_SEND_LEV_RATE = 192, /* RFC 4342, sec. 8.4 */ DCCPF_MAX_CCID_SPECIFIC = 255, }; -- cgit v1.2.3 From 828755cee087e4a34f45d6c9db661ccd0631cc6d Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Thu, 4 Sep 2008 07:30:19 +0200 Subject: dccp: Per-socket initialisation of feature negotiation This provides feature-negotiation initialisation for both DCCP sockets and DCCP request_sockets, to support feature negotiation during connection setup. It also resolves a FIXME regarding the congestion control initialisation. Thanks to Wei Yongjun for help with the IPv6 side of this patch. Signed-off-by: Gerrit Renker Acked-by: Ian McDonald --- include/linux/dccp.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 3978aff197d9..484b8a1fb023 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -412,6 +412,7 @@ extern void dccp_minisock_init(struct dccp_minisock *dmsk); * @dreq_iss: initial sequence number sent on the Response (RFC 4340, 7.1) * @dreq_isr: initial sequence number received on the Request * @dreq_service: service code present on the Request (there is just one) + * @dreq_featneg: feature negotiation options for this connection * The following two fields are analogous to the ones in dccp_sock: * @dreq_timestamp_echo: last received timestamp to echo (13.1) * @dreq_timestamp_echo: the time of receiving the last @dreq_timestamp_echo @@ -421,6 +422,7 @@ struct dccp_request_sock { __u64 dreq_iss; __u64 dreq_isr; __be32 dreq_service; + struct list_head dreq_featneg; __u32 dreq_timestamp_echo; __u32 dreq_timestamp_time; }; @@ -498,6 +500,7 @@ struct dccp_ackvec; * @dccps_mss_cache - current value of MSS (path MTU minus header sizes) * @dccps_rate_last - timestamp for rate-limiting DCCP-Sync (RFC 4340, 7.5.4) * @dccps_minisock - associated minisock (accessed via dccp_msk) + * @dccps_featneg - tracks feature-negotiation state (mostly during handshake) * @dccps_hc_rx_ackvec - rx half connection ack vector * @dccps_hc_rx_ccid - CCID used for the receiver (or receiving half-connection) * @dccps_hc_tx_ccid - CCID used for the sender (or sending half-connection) @@ -535,6 +538,7 @@ struct dccp_sock { __u64 dccps_ndp_count:48; unsigned long dccps_rate_last; struct dccp_minisock dccps_minisock; + struct list_head dccps_featneg; struct dccp_ackvec *dccps_hc_rx_ackvec; struct ccid *dccps_hc_rx_ccid; struct ccid *dccps_hc_tx_ccid; -- cgit v1.2.3 From 71bb49596bbf4e5a3328e1704d18604e822ba181 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Thu, 4 Sep 2008 07:30:19 +0200 Subject: dccp: Query supported CCIDs This provides a data structure to record which CCIDs are locally supported and three accessor functions: - a test function for internal use which is used to validate CCID requests made by the user; - a copy function so that the list can be used for feature-negotiation; - documented getsockopt() support so that the user can query capabilities. The data structure is a table which is filled in at compile-time with the list of available CCIDs (which in turn depends on the Kconfig choices). Using the copy function for cloning the list of supported CCIDs is useful for feature negotiation, since the negotiation is now with the full list of available CCIDs (e.g. {2, 3}) instead of the default value {2}. This means negotiation will not fail if the peer requests to use CCID3 instead of CCID2. Signed-off-by: Gerrit Renker Acked-by: Ian McDonald --- include/linux/dccp.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 484b8a1fb023..d3ac1bde60b4 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -209,6 +209,7 @@ struct dccp_so_feat { #define DCCP_SOCKOPT_SERVER_TIMEWAIT 6 #define DCCP_SOCKOPT_SEND_CSCOV 10 #define DCCP_SOCKOPT_RECV_CSCOV 11 +#define DCCP_SOCKOPT_AVAILABLE_CCIDS 12 #define DCCP_SOCKOPT_CCID_RX_INFO 128 #define DCCP_SOCKOPT_CCID_TX_INFO 192 -- cgit v1.2.3 From 668144f7b41716a9efe1b398e15ead32a26cd101 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Thu, 4 Sep 2008 07:30:19 +0200 Subject: dccp: Deprecate old setsockopt framework The previous setsockopt interface, which passed socket options via struct dccp_so_feat, is complicated/difficult to use. Continuing to support it leads to ugly code since the old approach did not distinguish between NN and SP values. This patch removes the old setsockopt interface and replaces it with two new functions to register NN/SP values for feature negotiation. These are essentially wrappers around the internal __feat_register functions, with checking added to avoid * wrong usage (type); * changing values while the connection is in progress. Signed-off-by: Gerrit Renker --- include/linux/dccp.h | 7 ------- 1 file changed, 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dccp.h b/include/linux/dccp.h index d3ac1bde60b4..6eaaca9b037a 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -193,13 +193,6 @@ enum dccp_feature_numbers { DCCPF_MAX_CCID_SPECIFIC = 255, }; -/* this structure is argument to DCCP_SOCKOPT_CHANGE_X */ -struct dccp_so_feat { - __u8 dccpsf_feat; - __u8 __user *dccpsf_val; - __u8 dccpsf_len; -}; - /* DCCP socket options */ #define DCCP_SOCKOPT_PACKET_SIZE 1 /* XXX deprecated, without effect */ #define DCCP_SOCKOPT_SERVICE 2 -- cgit v1.2.3 From 20f41eee82864e308a5499308a1722dc3181cc3a Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Thu, 4 Sep 2008 07:30:19 +0200 Subject: dccp: Feature negotiation for minimum-checksum-coverage This provides feature negotiation for server minimum checksum coverage which so far has been missing. Since sender/receiver coverage values range only from 0...15, their type has also been reduced in size from u16 to u4. Feature-negotiation options are now generated for both sender and receiver coverage, i.e. when the peer has `forgotten' to enable partial coverage then feature negotiation will automatically enable (negotiate) the partial coverage value for this connection. Signed-off-by: Gerrit Renker Acked-by: Ian McDonald --- include/linux/dccp.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 6eaaca9b037a..5a5a89935dbc 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -527,8 +527,8 @@ struct dccp_sock { __u32 dccps_timestamp_time; __u16 dccps_l_ack_ratio; __u16 dccps_r_ack_ratio; - __u16 dccps_pcslen; - __u16 dccps_pcrlen; + __u8 dccps_pcslen:4; + __u8 dccps_pcrlen:4; __u64 dccps_ndp_count:48; unsigned long dccps_rate_last; struct dccp_minisock dccps_minisock; -- cgit v1.2.3 From 17c30b40ed79e9f3955e884632c8f01e577b204a Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Thu, 4 Sep 2008 07:30:19 +0200 Subject: dccp: Deprecate Ack Ratio sysctl This patch deprecates the Ack Ratio sysctl, since * Ack Ratio is entirely ignored by CCID-3 and CCID-4, * Ack Ratio currently doesn't work in CCID-2 (i.e. is always set to 1); * even if it would work in CCID-2, there is no point for a user to change it: - Ack Ratio is constrained by cwnd (RFC 4341, 6.1.2), - if Ack Ratio > cwnd, the system resorts to spurious RTO timeouts (since waiting for Acks which will never arrive in this window), - cwnd is not a user-configurable value. The only reasonable place for Ack Ratio is to print it for debugging. It is planned to do this later on, as part of e.g. dccp_probe. With this patch Ack Ratio is now under full control of feature negotiation: * Ack Ratio is resolved as a dependency of the selected CCID; * if the chosen CCID supports it (i.e. CCID == CCID-2), Ack Ratio is set to the default of 2, following RFC 4340, 11.3 - "New connections start with Ack Ratio 2 for both endpoints"; * what happens then is part of another patch set, since it concerns the dynamic update of Ack Ratio while the connection is in full flight. Thanks to Tomasz Grobelny for discussion leading up to this patch. Signed-off-by: Gerrit Renker Acked-by: Arnaldo Carvalho de Melo --- include/linux/dccp.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 5a5a89935dbc..eda389ce04f4 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -368,7 +368,6 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) * @dccpms_ccid - Congestion Control Id (CCID) (section 10) * @dccpms_send_ack_vector - Send Ack Vector Feature (section 11.5) * @dccpms_send_ndp_count - Send NDP Count Feature (7.7.2) - * @dccpms_ack_ratio - Ack Ratio Feature (section 11.3) * @dccpms_pending - List of features being negotiated * @dccpms_conf - */ @@ -378,7 +377,6 @@ struct dccp_minisock { __u8 dccpms_tx_ccid; __u8 dccpms_send_ack_vector; __u8 dccpms_send_ndp_count; - __u8 dccpms_ack_ratio; struct list_head dccpms_pending; struct list_head dccpms_conf; }; -- cgit v1.2.3 From fade756f18d42694e3acb00e3471ab43002cba16 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Thu, 4 Sep 2008 07:30:19 +0200 Subject: dccp: Set per-connection CCIDs via socket options With this patch, TX/RX CCIDs can now be changed on a per-connection basis, which overrides the defaults set by the global sysctl variables for TX/RX CCIDs. To make full use of this facility, the remaining patches of this patch set are needed, which track dependencies and activate negotiated feature values. Note on the maximum number of CCIDs that can be registered: ----------------------------------------------------------- The maximum number of CCIDs that can be registered on the socket is constrained by the space in a Confirm/Change feature negotiation option. The space in these in turn depends on the size of header options as defined in RFC 4340, 5.8. Since this is a recurring constant, it has been moved from ackvec.h into linux/dccp.h, clarifying its purpose. Relative to this size, the maximum number of CCID identifiers that can be present in a Confirm option (which always consumes 1 byte more than a Change option, cf. 6.1) is 2 bytes less than the maximum TLV size: one for the CCID-feature-type and one for the selected value. Signed-off-by: Gerrit Renker --- include/linux/dccp.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/dccp.h b/include/linux/dccp.h index eda389ce04f4..6a72ff52a8a4 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -168,6 +168,8 @@ enum { DCCPO_MIN_CCID_SPECIFIC = 128, DCCPO_MAX_CCID_SPECIFIC = 255, }; +/* maximum size of a single TLV-encoded DCCP option (sans type/len bytes) */ +#define DCCP_SINGLE_OPT_MAXLEN 253 /* DCCP CCIDS */ enum { @@ -203,6 +205,9 @@ enum dccp_feature_numbers { #define DCCP_SOCKOPT_SEND_CSCOV 10 #define DCCP_SOCKOPT_RECV_CSCOV 11 #define DCCP_SOCKOPT_AVAILABLE_CCIDS 12 +#define DCCP_SOCKOPT_CCID 13 +#define DCCP_SOCKOPT_TX_CCID 14 +#define DCCP_SOCKOPT_RX_CCID 15 #define DCCP_SOCKOPT_CCID_RX_INFO 128 #define DCCP_SOCKOPT_CCID_TX_INFO 192 -- cgit v1.2.3 From 78673e24df27c76ec75565f4024d45c2c74ef148 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Thu, 4 Sep 2008 07:30:19 +0200 Subject: dccp: Remove obsolete parts of the old CCID interface The TX/RX CCIDs of the minisock are now redundant: similar to the Ack Vector case, their value equals initially that of the sysctl, but at the end of feature negotiation may be something different. The old interface removed by this patch thus has been replaced by the newer interface to dynamically query the currently loaded CCIDs earlier in this patch set. Also removed the constructors for the TX CCID and the RX CCID, since the switch rx/non-rx is done by the handler in minisocks.c (and the handler is the only place in the code where CCIDs are loaded). Signed-off-by: Gerrit Renker Acked-by: Ian McDonald --- include/linux/dccp.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 6a72ff52a8a4..46daea312d92 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -370,7 +370,6 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) * Will be used to pass the state from dccp_request_sock to dccp_sock. * * @dccpms_sequence_window - Sequence Window Feature (section 7.5.2) - * @dccpms_ccid - Congestion Control Id (CCID) (section 10) * @dccpms_send_ack_vector - Send Ack Vector Feature (section 11.5) * @dccpms_send_ndp_count - Send NDP Count Feature (7.7.2) * @dccpms_pending - List of features being negotiated @@ -378,8 +377,6 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) */ struct dccp_minisock { __u64 dccpms_sequence_window; - __u8 dccpms_rx_ccid; - __u8 dccpms_tx_ccid; __u8 dccpms_send_ack_vector; __u8 dccpms_send_ndp_count; struct list_head dccpms_pending; -- cgit v1.2.3 From 68e074bfcef269bc61006c2740d7f89ccbbd93d7 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Thu, 4 Sep 2008 07:30:19 +0200 Subject: dccp: Remove manual influence on NDP Count feature Updating the NDP count feature is handled automatically now: * for CCID-2 it is disabled, since the code does not use NDP counts; * for CCID-3 it is enabled, as NDP counts are used to determine loss lengths. Allowing the user to change NDP values leads to unpredictable and failing behaviour, since it is then possible to disable NDP counts even when they are needed (e.g. in CCID-3). This means that only those user settings are sensible that agree with the values for Send NDP Count implied by the choice of CCID. But those settings are already activated by the feature negotiation (CCID dependency tracking), hence this form of support is redundant. At startup the initialisation of the NDP count feature is with the default value of 0, which is done implicitly by the zeroing-out of the socket when it is allocated. If the choice of CCID or feature negotiation enables NDP count, this will then be updated via the NDP activation handler. Signed-off-by: Gerrit Renker Acked-by: Ian McDonald --- include/linux/dccp.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 46daea312d92..60e94438eadd 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -371,14 +371,12 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) * * @dccpms_sequence_window - Sequence Window Feature (section 7.5.2) * @dccpms_send_ack_vector - Send Ack Vector Feature (section 11.5) - * @dccpms_send_ndp_count - Send NDP Count Feature (7.7.2) * @dccpms_pending - List of features being negotiated * @dccpms_conf - */ struct dccp_minisock { __u64 dccpms_sequence_window; __u8 dccpms_send_ack_vector; - __u8 dccpms_send_ndp_count; struct list_head dccpms_pending; struct list_head dccpms_conf; }; @@ -490,6 +488,7 @@ struct dccp_ackvec; * @dccps_r_ack_ratio - feature-remote Ack Ratio * @dccps_pcslen - sender partial checksum coverage (via sockopt) * @dccps_pcrlen - receiver partial checksum coverage (via sockopt) + * @dccps_send_ndp_count - local Send NDP Count feature (7.7.2) * @dccps_ndp_count - number of Non Data Packets since last data packet * @dccps_mss_cache - current value of MSS (path MTU minus header sizes) * @dccps_rate_last - timestamp for rate-limiting DCCP-Sync (RFC 4340, 7.5.4) @@ -529,6 +528,7 @@ struct dccp_sock { __u16 dccps_r_ack_ratio; __u8 dccps_pcslen:4; __u8 dccps_pcrlen:4; + __u8 dccps_send_ndp_count:1; __u64 dccps_ndp_count:48; unsigned long dccps_rate_last; struct dccp_minisock dccps_minisock; -- cgit v1.2.3 From b235dc4abbc1356284bd0dc730efa711f394e0e2 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Thu, 4 Sep 2008 07:30:19 +0200 Subject: dccp ccid-2: Phase out the use of boolean Ack Vector sysctl This removes the use of the sysctl and the minisock variable for the Send Ack Vector feature, which is now handled fully dynamically via feature negotiation; i.e. when CCID2 is enabled, Ack Vectors are automatically enabled (as per RFC 4341, 4.). Using a sysctl in parallel to this implementation would open the door to crashes, since much of the code relies on tests of the boolean minisock / sysctl variable. Thus, this patch replaces all tests of type if (dccp_msk(sk)->dccpms_send_ack_vector) /* ... */ with if (dp->dccps_hc_rx_ackvec != NULL) /* ... */ The dccps_hc_rx_ackvec is allocated by the dccp_hdlr_ackvec() when feature negotiation concluded that Ack Vectors are to be used on the half-connection. Otherwise, it is NULL (due to dccp_init_sock/dccp_create_openreq_child), so that the test is a valid one. The activation handler for Ack Vectors is called as soon as the feature negotiation has concluded at the * server when the Ack marking the transition RESPOND => OPEN arrives; * client after it has sent its ACK, marking the transition REQUEST => PARTOPEN. Adding the sequence number of the Response packet to the Ack Vector has been removed, since (a) connection establishment implies that the Response has been received; (b) the CCIDs only look at packets received in the (PART)OPEN state, i.e. this entry will always be ignored; (c) it can not be used for anything useful - to detect loss for instance, only packets received after the loss can serve as pseudo-dupacks. Signed-off-by: Gerrit Renker Acked-by: Ian McDonald --- include/linux/dccp.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 60e94438eadd..61734e27abb7 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -360,7 +360,6 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) #define DCCPF_INITIAL_SEQUENCE_WINDOW 100 #define DCCPF_INITIAL_ACK_RATIO 2 #define DCCPF_INITIAL_CCID DCCPC_CCID2 -#define DCCPF_INITIAL_SEND_ACK_VECTOR 1 /* FIXME: for now we're default to 1 but it should really be 0 */ #define DCCPF_INITIAL_SEND_NDP_COUNT 1 @@ -370,13 +369,11 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) * Will be used to pass the state from dccp_request_sock to dccp_sock. * * @dccpms_sequence_window - Sequence Window Feature (section 7.5.2) - * @dccpms_send_ack_vector - Send Ack Vector Feature (section 11.5) * @dccpms_pending - List of features being negotiated * @dccpms_conf - */ struct dccp_minisock { __u64 dccpms_sequence_window; - __u8 dccpms_send_ack_vector; struct list_head dccpms_pending; struct list_head dccpms_conf; }; -- cgit v1.2.3 From 5d3dac267a7fd0811ec777e76a81f97f5cdcb395 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Thu, 4 Sep 2008 07:30:19 +0200 Subject: dccp: Initialisation framework for feature negotiation This initialises feature negotiation from two tables, which are initialised from sysctls. As a novel feature, specifics of the implementation (e.g. currently short seqnos and ECN are not supported) are advertised for robustness. Signed-off-by: Gerrit Renker Acked-by: Ian McDonald --- include/linux/dccp.h | 19 ------------------- 1 file changed, 19 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 61734e27abb7..990e97fa1f07 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -369,28 +369,9 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) * Will be used to pass the state from dccp_request_sock to dccp_sock. * * @dccpms_sequence_window - Sequence Window Feature (section 7.5.2) - * @dccpms_pending - List of features being negotiated - * @dccpms_conf - */ struct dccp_minisock { __u64 dccpms_sequence_window; - struct list_head dccpms_pending; - struct list_head dccpms_conf; -}; - -struct dccp_opt_conf { - __u8 *dccpoc_val; - __u8 dccpoc_len; -}; - -struct dccp_opt_pend { - struct list_head dccpop_node; - __u8 dccpop_type; - __u8 dccpop_feat; - __u8 *dccpop_val; - __u8 dccpop_len; - int dccpop_conf; - struct dccp_opt_conf *dccpop_sc; }; extern void dccp_minisock_init(struct dccp_minisock *dmsk); -- cgit v1.2.3 From 51c7d4fa2675c106a980ddcdbe308b54b5151945 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Thu, 4 Sep 2008 07:30:19 +0200 Subject: dccp: Implement both feature-local and feature-remote Sequence Window feature This adds full support for local/remote Sequence Window feature, from which the * sequence-number-validity (W) and * acknowledgment-number-validity (W') windows derive as specified in RFC 4340, 7.5.3. Specifically, the following changes are introduced: * integrated new socket fields into dccp_sk; * updated the update_gsr/gss routines with regard to these fields; * updated handler code: the Sequence Window feature is located at the TX side, so the local feature is meant if the handler-rx flag is false; * the initialisation of `rcv_wnd' in reqsk is removed, since - rcv_wnd is not used by the code anywhere; - sequence number checks are not done in the LISTEN state (cf. 7.5.3); - dccp_check_req checks the Ack number validity more rigorously; * the `struct dccp_minisock' became empty and is now removed. Until the handshake completes with activating negotiated values, the local/remote Sequence-Window values are undefined and thus can not reliably be estimated. This issue is addressed in a separate patch. Signed-off-by: Gerrit Renker Acked-by: Ian McDonald --- include/linux/dccp.h | 24 ++++-------------------- 1 file changed, 4 insertions(+), 20 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 990e97fa1f07..7a0502ab383a 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -363,19 +363,6 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) /* FIXME: for now we're default to 1 but it should really be 0 */ #define DCCPF_INITIAL_SEND_NDP_COUNT 1 -/** - * struct dccp_minisock - Minimal DCCP connection representation - * - * Will be used to pass the state from dccp_request_sock to dccp_sock. - * - * @dccpms_sequence_window - Sequence Window Feature (section 7.5.2) - */ -struct dccp_minisock { - __u64 dccpms_sequence_window; -}; - -extern void dccp_minisock_init(struct dccp_minisock *dmsk); - /** * struct dccp_request_sock - represent DCCP-specific connection request * @dreq_inet_rsk: structure inherited from @@ -464,13 +451,14 @@ struct dccp_ackvec; * @dccps_timestamp_time - time of receiving latest @dccps_timestamp_echo * @dccps_l_ack_ratio - feature-local Ack Ratio * @dccps_r_ack_ratio - feature-remote Ack Ratio + * @dccps_l_seq_win - local Sequence Window (influences ack number validity) + * @dccps_r_seq_win - remote Sequence Window (influences seq number validity) * @dccps_pcslen - sender partial checksum coverage (via sockopt) * @dccps_pcrlen - receiver partial checksum coverage (via sockopt) * @dccps_send_ndp_count - local Send NDP Count feature (7.7.2) * @dccps_ndp_count - number of Non Data Packets since last data packet * @dccps_mss_cache - current value of MSS (path MTU minus header sizes) * @dccps_rate_last - timestamp for rate-limiting DCCP-Sync (RFC 4340, 7.5.4) - * @dccps_minisock - associated minisock (accessed via dccp_msk) * @dccps_featneg - tracks feature-negotiation state (mostly during handshake) * @dccps_hc_rx_ackvec - rx half connection ack vector * @dccps_hc_rx_ccid - CCID used for the receiver (or receiving half-connection) @@ -504,12 +492,13 @@ struct dccp_sock { __u32 dccps_timestamp_time; __u16 dccps_l_ack_ratio; __u16 dccps_r_ack_ratio; + __u64 dccps_l_seq_win:48; + __u64 dccps_r_seq_win:48; __u8 dccps_pcslen:4; __u8 dccps_pcrlen:4; __u8 dccps_send_ndp_count:1; __u64 dccps_ndp_count:48; unsigned long dccps_rate_last; - struct dccp_minisock dccps_minisock; struct list_head dccps_featneg; struct dccp_ackvec *dccps_hc_rx_ackvec; struct ccid *dccps_hc_rx_ccid; @@ -527,11 +516,6 @@ static inline struct dccp_sock *dccp_sk(const struct sock *sk) return (struct dccp_sock *)sk; } -static inline struct dccp_minisock *dccp_msk(const struct sock *sk) -{ - return (struct dccp_minisock *)&dccp_sk(sk)->dccps_minisock; -} - static inline const char *dccp_role(const struct sock *sk) { switch (dccp_sk(sk)->dccps_role) { -- cgit v1.2.3 From 0a4822679d94e2b0117aeead06a19fad59533905 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Thu, 4 Sep 2008 07:30:19 +0200 Subject: dccp: Initialisation and type-checking of feature sysctls This patch takes care of initialising and type-checking sysctls related to feature negotiation. Type checking is important since some of the sysctls now directly act on the feature-negotiation process. The sysctls are initialised with the known default values for each feature. For the type-checking the value constraints from RFC 4340 are used: * Sequence Window uses the specified Wmin=32, the maximum is ulong (4 bytes), tested and confirmed that it works up to 4294967295 - for Gbps speed; * Ack Ratio is between 0 .. 0xffff (2-byte unsigned integer); * CCIDs are between 0 .. 255; * request_retries, retries1, retries2 also between 0..255 for good measure; * tx_qlen is checked to be non-negative; * sync_ratelimit remains as before. Further changes: ---------------- Performed s@sysctl_dccp_feat@sysctl_dccp@g since the sysctls are now in feat.c. Signed-off-by: Gerrit Renker Acked-by: Ian McDonald --- include/linux/dccp.h | 8 -------- 1 file changed, 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 7a0502ab383a..7434a8353e23 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -355,14 +355,6 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) return __dccp_hdr_len(dccp_hdr(skb)); } - -/* initial values for each feature */ -#define DCCPF_INITIAL_SEQUENCE_WINDOW 100 -#define DCCPF_INITIAL_ACK_RATIO 2 -#define DCCPF_INITIAL_CCID DCCPC_CCID2 -/* FIXME: for now we're default to 1 but it should really be 0 */ -#define DCCPF_INITIAL_SEND_NDP_COUNT 1 - /** * struct dccp_request_sock - represent DCCP-specific connection request * @dreq_inet_rsk: structure inherited from -- cgit v1.2.3 From f10ecaee6dc2c6d56783462b2a82e98bc81b55f4 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Thu, 4 Sep 2008 07:30:19 +0200 Subject: dccp: Replace magic CCID-specific numbers by symbolic constants The constants DCCPO_{MIN,MAX}_CCID_SPECIFIC are nowhere used in the code, but instead for the CCID-specific options numbers are used. This patch unifies the use of CCID-specific option numbers, by adding symbolic names reflecting the definitions in RFC 4340, 10.3. Signed-off-by: Gerrit Renker --- include/linux/dccp.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 7434a8353e23..7187bd8a75f6 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -165,8 +165,10 @@ enum { DCCPO_TIMESTAMP_ECHO = 42, DCCPO_ELAPSED_TIME = 43, DCCPO_MAX = 45, - DCCPO_MIN_CCID_SPECIFIC = 128, - DCCPO_MAX_CCID_SPECIFIC = 255, + DCCPO_MIN_RX_CCID_SPECIFIC = 128, /* from sender to receiver */ + DCCPO_MAX_RX_CCID_SPECIFIC = 191, + DCCPO_MIN_TX_CCID_SPECIFIC = 192, /* from receiver to sender */ + DCCPO_MAX_TX_CCID_SPECIFIC = 255, }; /* maximum size of a single TLV-encoded DCCP option (sans type/len bytes) */ #define DCCP_SINGLE_OPT_MAXLEN 253 -- cgit v1.2.3 From c2f42077bd06f300ae959204f3c007f820f5e769 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Thu, 4 Sep 2008 07:30:19 +0200 Subject: dccp ccid-2: Schedule Sync as out-of-band mechanism The problem with Ack Vectors is that i) their length is variable and can in principle grow quite large, ii) it is hard to predict exactly how large they will be. Due to the second point it seems not a good idea to reduce the MPS; in particular when on average there is enough room for the Ack Vector and an increase in length is momentarily due to some burst loss, after which the Ack Vector returns to its normal/average length. The solution taken by this patch is to subtract a minimum-expected Ack Vector length from the MPS (previous patch), and to defer any larger Ack Vectors onto a separate Sync - but only if indeed there is no space left on the skb. This patch provides the infrastructure to schedule Sync-packets for transporting (urgent) out-of-band data. Its signalling is quicker than scheduling an Ack, since it does not need to wait for new application data. It can thus serve other parts of the DCCP code as well. Signed-off-by: Gerrit Renker --- include/linux/dccp.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 7187bd8a75f6..83197b601a4f 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -462,6 +462,7 @@ struct dccp_ackvec; * @dccps_hc_rx_insert_options - receiver wants to add options when acking * @dccps_hc_tx_insert_options - sender wants to add options when sending * @dccps_server_timewait - server holds timewait state on close (RFC 4340, 8.3) + * @dccps_sync_scheduled - flag which signals "send out-of-band message soon" * @dccps_xmit_timer - timer for when CCID is not ready to send * @dccps_syn_rtt - RTT sample from Request/Response exchange (in usecs) */ @@ -502,6 +503,7 @@ struct dccp_sock { __u8 dccps_hc_rx_insert_options:1; __u8 dccps_hc_tx_insert_options:1; __u8 dccps_server_timewait:1; + __u8 dccps_sync_scheduled:1; struct timer_list dccps_xmit_timer; }; -- cgit v1.2.3 From e7937772d7a2b0127cc4cbc67bc594e139fdaf63 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Thu, 4 Sep 2008 07:30:19 +0200 Subject: dccp: Extend CCID packet dequeueing interface This extends the packet dequeuing interface of dccp_write_xmit() to allow 1. CCIDs to take care of timing when the next packet may be sent; 2. delayed sending (as before, with an inter-packet gap up to 65.535 seconds). The main purpose is to take CCID2 out of its polling mode (when it is network- limited, it tries every millisecond to send, without interruption). The interface can also be used to support other CCIDs. The mode of operation for (2) is as follows: * new packet is enqueued via dccp_sendmsg() => dccp_write_xmit(), * ccid_hc_tx_send_packet() detects that it may not send (e.g. window full), * it signals this condition via `CCID_PACKET_WILL_DEQUEUE_LATER', * dccp_write_xmit() returns without further action; * after some time the wait-condition for CCID becomes true, * that CCID schedules the tasklet, * tasklet function calls ccid_hc_tx_send_packet() via dccp_write_xmit(), * since the wait-condition is now true, ccid_hc_tx_packet() returns "send now", * packet is sent, and possibly more (since dccp_write_xmit() loops). Code reuse: the taskled function calls dccp_write_xmit(), the timer function reduces to a wrapper around the same code. If the tasklet finds that the socket is locked, it re-schedules the tasklet function (not the tasklet) after one jiffy. Changed DCCP_BUG to dccp_pr_debug when transmit_skb returns an error (e.g. when a local qdisc is used, NET_XMIT_DROP=1 can be returned for many packets). Signed-off-by: Gerrit Renker --- include/linux/dccp.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 83197b601a4f..eed52bcd35d0 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -463,7 +463,8 @@ struct dccp_ackvec; * @dccps_hc_tx_insert_options - sender wants to add options when sending * @dccps_server_timewait - server holds timewait state on close (RFC 4340, 8.3) * @dccps_sync_scheduled - flag which signals "send out-of-band message soon" - * @dccps_xmit_timer - timer for when CCID is not ready to send + * @dccps_xmitlet - tasklet scheduled by the TX CCID to dequeue data packets + * @dccps_xmit_timer - used by the TX CCID to delay sending (rate-based pacing) * @dccps_syn_rtt - RTT sample from Request/Response exchange (in usecs) */ struct dccp_sock { @@ -504,6 +505,7 @@ struct dccp_sock { __u8 dccps_hc_tx_insert_options:1; __u8 dccps_server_timewait:1; __u8 dccps_sync_scheduled:1; + struct tasklet_struct dccps_xmitlet; struct timer_list dccps_xmit_timer; }; -- cgit v1.2.3 From d6da3511d6b558d0b017777b61dc08b8fbc06ea4 Mon Sep 17 00:00:00 2001 From: Tomasz Grobelny Date: Thu, 4 Sep 2008 07:30:19 +0200 Subject: dccp: Policy-based packet dequeueing infrastructure This patch adds a generic infrastructure for policy-based dequeueing of TX packets and provides two policies: * a simple FIFO policy (which is the default) and * a priority based policy (set via socket options). Both policies honour the tx_qlen sysctl for the maximum size of the write queue (can be overridden via socket options). The priority policy uses skb->priority internally to assign an u32 priority identifier, using the same ranking as SO_PRIORITY. The skb->priority field is set to 0 when the packet leaves DCCP. The priority is supplied as ancillary data using cmsg(3), the patch also provides the requisite parsing routines. Signed-off-by: Tomasz Grobelny Signed-off-by: Gerrit Renker --- include/linux/dccp.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'include/linux') diff --git a/include/linux/dccp.h b/include/linux/dccp.h index eed52bcd35d0..010e2d87ed75 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -197,6 +197,21 @@ enum dccp_feature_numbers { DCCPF_MAX_CCID_SPECIFIC = 255, }; +/* DCCP socket control message types for cmsg */ +enum dccp_cmsg_type { + DCCP_SCM_PRIORITY = 1, + DCCP_SCM_QPOLICY_MAX = 0xFFFF, + /* ^-- Up to here reserved exclusively for qpolicy parameters */ + DCCP_SCM_MAX +}; + +/* DCCP priorities for outgoing/queued packets */ +enum dccp_packet_dequeueing_policy { + DCCPQ_POLICY_SIMPLE, + DCCPQ_POLICY_PRIO, + DCCPQ_POLICY_MAX +}; + /* DCCP socket options */ #define DCCP_SOCKOPT_PACKET_SIZE 1 /* XXX deprecated, without effect */ #define DCCP_SOCKOPT_SERVICE 2 @@ -210,6 +225,8 @@ enum dccp_feature_numbers { #define DCCP_SOCKOPT_CCID 13 #define DCCP_SOCKOPT_TX_CCID 14 #define DCCP_SOCKOPT_RX_CCID 15 +#define DCCP_SOCKOPT_QPOLICY_ID 16 +#define DCCP_SOCKOPT_QPOLICY_TXQLEN 17 #define DCCP_SOCKOPT_CCID_RX_INFO 128 #define DCCP_SOCKOPT_CCID_TX_INFO 192 @@ -458,6 +475,8 @@ struct dccp_ackvec; * @dccps_hc_rx_ccid - CCID used for the receiver (or receiving half-connection) * @dccps_hc_tx_ccid - CCID used for the sender (or sending half-connection) * @dccps_options_received - parsed set of retrieved options + * @dccps_qpolicy - TX dequeueing policy, one of %dccp_packet_dequeueing_policy + * @dccps_tx_qlen - maximum length of the TX queue * @dccps_role - role of this sock, one of %dccp_role * @dccps_hc_rx_insert_options - receiver wants to add options when acking * @dccps_hc_tx_insert_options - sender wants to add options when sending @@ -500,6 +519,8 @@ struct dccp_sock { struct ccid *dccps_hc_rx_ccid; struct ccid *dccps_hc_tx_ccid; struct dccp_options_received dccps_options_received; + __u8 dccps_qpolicy; + __u32 dccps_tx_qlen; enum dccp_role dccps_role:2; __u8 dccps_hc_rx_insert_options:1; __u8 dccps_hc_tx_insert_options:1; -- cgit v1.2.3 From f7981c1c67b53abb4a7d8a501e68585b9826179a Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 26 Aug 2008 10:23:22 +0200 Subject: mv643xx_eth: require contiguous receive and transmit queue numbering Simplify receive and transmit queue handling by requiring the set of queue numbers to be contiguous starting from zero. Signed-off-by: Lennert Buytenhek --- include/linux/mv643xx_eth.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mv643xx_eth.h b/include/linux/mv643xx_eth.h index 12078577aef6..eb78b00edcde 100644 --- a/include/linux/mv643xx_eth.h +++ b/include/linux/mv643xx_eth.h @@ -49,10 +49,10 @@ struct mv643xx_eth_platform_data { int duplex; /* - * Which RX/TX queues to use. + * How many RX/TX queues to use. */ - int rx_queue_mask; - int tx_queue_mask; + int rx_queue_count; + int tx_queue_count; /* * Override default RX/TX queue sizes if nonzero. -- cgit v1.2.3 From fc0eb9f226d8ecc8e3b563bf808bd6d61a6153a1 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 26 Aug 2008 12:56:56 +0200 Subject: mv643xx_eth: smi sharing is a per-unit property, not a per-port one Which top-level unit's SMI interface to use should be a property of the top-level unit, not of the individual ports. This patch moves the ->shared_smi pointer from the per-port platform data to the global platform data. Signed-off-by: Lennert Buytenhek --- include/linux/mv643xx_eth.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mv643xx_eth.h b/include/linux/mv643xx_eth.h index eb78b00edcde..12339eb65704 100644 --- a/include/linux/mv643xx_eth.h +++ b/include/linux/mv643xx_eth.h @@ -17,6 +17,7 @@ struct mv643xx_eth_shared_platform_data { struct mbus_dram_target_info *dram; + struct platform_device *shared_smi; unsigned int t_clk; }; @@ -30,7 +31,6 @@ struct mv643xx_eth_platform_data { /* * Whether a PHY is present, and if yes, at which address. */ - struct platform_device *shared_smi; int force_phy_addr; int phy_addr; -- cgit v1.2.3 From ac840605f3b1d9b99e1e6629a54994f8e003ff91 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 26 Aug 2008 14:06:47 +0200 Subject: mv643xx_eth: remove force_phy_addr field Currently, there are two different fields in the mv643xx_eth_platform_data struct that together describe the PHY address -- one field (phy_addr) has the address of the PHY, but if that address is zero, a second field (force_phy_addr) needs to be set to distinguish the actual address zero from a zero due to not having filled in the PHY address explicitly (which should mean 'use the default PHY address'). If we are a bit smarter about the encoding of the phy_addr field, we can avoid the need for a second field -- this patch does that. Signed-off-by: Lennert Buytenhek --- include/linux/mv643xx_eth.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mv643xx_eth.h b/include/linux/mv643xx_eth.h index 12339eb65704..cbbbe9bfecad 100644 --- a/include/linux/mv643xx_eth.h +++ b/include/linux/mv643xx_eth.h @@ -21,6 +21,10 @@ struct mv643xx_eth_shared_platform_data { unsigned int t_clk; }; +#define MV643XX_ETH_PHY_ADDR_DEFAULT 0 +#define MV643XX_ETH_PHY_ADDR(x) (0x80 | (x)) +#define MV643XX_ETH_PHY_NONE 0xff + struct mv643xx_eth_platform_data { /* * Pointer back to our parent instance, and our port number. @@ -31,7 +35,6 @@ struct mv643xx_eth_platform_data { /* * Whether a PHY is present, and if yes, at which address. */ - int force_phy_addr; int phy_addr; /* -- cgit v1.2.3 From f59ac0481660e66cec67f1d6b024e78b9dc715fe Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Fri, 29 Aug 2008 16:26:43 -0700 Subject: cfg80211: keep track of supported interface modes It is obviously good for userspace to know up front which interface modes a given piece of hardware might support (even if adding such an interface might fail later because of concurrency issues), so let's make cfg80211 aware of that. For good measure, disallow adding interfaces in all other modes so drivers don't forget to announce support for one mode when they add it. Signed-off-by: Johannes Berg Signed-off-by: Stephen Blackheath Signed-off-by: Ivo van Doorn Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- include/linux/nl80211.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 0c1147de3ec7..5e51f4e7600b 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -210,6 +210,10 @@ enum nl80211_commands { * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from * association request when used with NL80211_CMD_NEW_STATION) * + * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all + * supported interface types, each a flag attribute with the number + * of the interface mode. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -259,6 +263,8 @@ enum nl80211_attrs { NL80211_ATTR_HT_CAPABILITY, + NL80211_ATTR_SUPPORTED_IFTYPES, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From 410e27a49bb98bc7fa3ff5fc05cc313817b9f253 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Tue, 9 Sep 2008 13:27:22 +0200 Subject: This reverts "Merge branch 'dccp' of g