From d6157e4f18173ad24441aa9ca04e7e9121a9b4c7 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Mon, 10 Aug 2015 16:41:45 +0200 Subject: ARM: at91: remove useless includes in platform_data/atmel.h include/linux/platform_data/atmel.h has a lot of useless includes, remove them. Signed-off-by: Alexandre Belloni Signed-off-by: Nicolas Ferre --- include/linux/platform_data/atmel.h | 8 -------- 1 file changed, 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h index 527a85c61924..4d67a5e82c83 100644 --- a/include/linux/platform_data/atmel.h +++ b/include/linux/platform_data/atmel.h @@ -9,15 +9,7 @@ #include #include -#include -#include -#include -#include -#include -#include -#include #include -#include /* * at91: 6 USARTs and one DBGU port (SAM9260) -- cgit v1.2.3 From 5cfc5220a63b1008e7198fb4f91c3ef763e46657 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Fri, 18 Sep 2015 10:14:41 +0300 Subject: ARM: pxa: Remove unused clock_enable field from struct pxa2xx_spi_master Use for struct pxa2xx_spi_master clock_enable field was removed years ago from the pxa2xx-spi driver by the commit 2f1a74e5a2de ("[ARM] pxa: make pxa2xx_spi driver use ssp_request()/ssp_free()"). Therefore remove it from structure definition, documentation and from couple affected board files. Signed-off-by: Jarkko Nikula Acked-by: Mark Brown Signed-off-by: Robert Jarzmik --- include/linux/spi/pxa2xx_spi.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h index 6d36dacec4ba..9ec4c147abbc 100644 --- a/include/linux/spi/pxa2xx_spi.h +++ b/include/linux/spi/pxa2xx_spi.h @@ -23,7 +23,6 @@ struct dma_chan; /* device.platform_data for SSP controller devices */ struct pxa2xx_spi_master { - u32 clock_enable; u16 num_chipselect; u8 enable_dma; -- cgit v1.2.3 From a645654b817feba05e5156345325d19fc85ebc9f Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Sun, 23 Aug 2015 15:18:55 +0200 Subject: vga_switcheroo: Document _ALL_ the things! This adds an "Overview" DOC section plus two DOC sections for the modes of use ("Manual switching and manual power control" and "Driver power control"). Also included is kernel-doc for all public functions, structs and enums. Signed-off-by: Lukas Wunner Signed-off-by: Daniel Vetter --- include/linux/vga_switcheroo.h | 85 ++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 82 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/vga_switcheroo.h b/include/linux/vga_switcheroo.h index b483abd34493..fe90bfc3b510 100644 --- a/include/linux/vga_switcheroo.h +++ b/include/linux/vga_switcheroo.h @@ -1,10 +1,31 @@ /* + * vga_switcheroo.h - Support for laptop with dual GPU using one set of outputs + * * Copyright (c) 2010 Red Hat Inc. * Author : Dave Airlie * - * Licensed under GPLv2 + * Copyright (c) 2015 Lukas Wunner + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS + * IN THE SOFTWARE. * - * vga_switcheroo.h - Support for laptop with dual GPU using one set of outputs */ #ifndef _LINUX_VGA_SWITCHEROO_H_ @@ -14,6 +35,20 @@ struct pci_dev; +/** + * enum vga_switcheroo_state - client power state + * @VGA_SWITCHEROO_OFF: off + * @VGA_SWITCHEROO_ON: on + * @VGA_SWITCHEROO_INIT: client has registered with vga_switcheroo but + * vga_switcheroo is not enabled, i.e. no second client or no handler + * has registered. Only used in vga_switcheroo_get_client_state() which + * in turn is only called from hda_intel.c + * @VGA_SWITCHEROO_NOT_FOUND: client has not registered with vga_switcheroo. + * Only used in vga_switcheroo_get_client_state() which in turn is only + * called from hda_intel.c + * + * Client power state. + */ enum vga_switcheroo_state { VGA_SWITCHEROO_OFF, VGA_SWITCHEROO_ON, @@ -22,20 +57,64 @@ enum vga_switcheroo_state { VGA_SWITCHEROO_NOT_FOUND, }; +/** + * enum vga_switcheroo_client_id - client identifier + * @VGA_SWITCHEROO_IGD: integrated graphics device + * @VGA_SWITCHEROO_DIS: discrete graphics device + * @VGA_SWITCHEROO_MAX_CLIENTS: currently no more than two GPUs are supported + * + * Client identifier. Audio clients use the same identifier & 0x100. + */ enum vga_switcheroo_client_id { VGA_SWITCHEROO_IGD, VGA_SWITCHEROO_DIS, VGA_SWITCHEROO_MAX_CLIENTS, }; +/** + * struct vga_switcheroo_handler - handler callbacks + * @init: initialize handler. + * Optional. This gets called when vga_switcheroo is enabled, i.e. when + * two vga clients have registered. It allows the handler to perform + * some delayed initialization that depends on the existence of the + * vga clients. Currently only the radeon and amdgpu drivers use this. + * The return value is ignored + * @switchto: switch outputs to given client. + * Mandatory. For muxless machines this should be a no-op. Returning 0 + * denotes success, anything else failure (in which case the switch is + * aborted) + * @power_state: cut or reinstate power of given client. + * Optional. The return value is ignored + * @get_client_id: determine if given pci device is integrated or discrete GPU. + * Mandatory + * + * Handler callbacks. The multiplexer itself. The @switchto and @get_client_id + * methods are mandatory, all others may be set to NULL. + */ struct vga_switcheroo_handler { + int (*init)(void); int (*switchto)(enum vga_switcheroo_client_id id); int (*power_state)(enum vga_switcheroo_client_id id, enum vga_switcheroo_state state); - int (*init)(void); int (*get_client_id)(struct pci_dev *pdev); }; +/** + * struct vga_switcheroo_client_ops - client callbacks + * @set_gpu_state: do the equivalent of suspend/resume for the card. + * Mandatory. This should not cut power to the discrete GPU, + * which is the job of the handler + * @reprobe: poll outputs. + * Optional. This gets called after waking the GPU and switching + * the outputs to it + * @can_switch: check if the device is in a position to switch now. + * Mandatory. The client should return false if a user space process + * has one of its device files open + * + * Client callbacks. A client can be either a GPU or an audio device on a GPU. + * The @set_gpu_state and @can_switch methods are mandatory, @reprobe may be + * set to NULL. For audio clients, the @reprobe member is bogus. + */ struct vga_switcheroo_client_ops { void (*set_gpu_state)(struct pci_dev *dev, enum vga_switcheroo_state); void (*reprobe)(struct pci_dev *dev); -- cgit v1.2.3 From 7dc87ff8815ef43717c936faea79013855e3dbef Mon Sep 17 00:00:00 2001 From: Fugang Duan Date: Mon, 7 Sep 2015 10:54:59 +0800 Subject: ARM: imx7d: add imx7d iomux-gpr field define Add imx7d iomux-gpr field define. Signed-off-by: Fugang Duan Signed-off-by: Shawn Guo --- include/linux/mfd/syscon/imx7-iomuxc-gpr.h | 47 ++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 include/linux/mfd/syscon/imx7-iomuxc-gpr.h (limited to 'include/linux') diff --git a/include/linux/mfd/syscon/imx7-iomuxc-gpr.h b/include/linux/mfd/syscon/imx7-iomuxc-gpr.h new file mode 100644 index 000000000000..4585d6105d68 --- /dev/null +++ b/include/linux/mfd/syscon/imx7-iomuxc-gpr.h @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_IMX7_IOMUXC_GPR_H +#define __LINUX_IMX7_IOMUXC_GPR_H + +#define IOMUXC_GPR0 0x00 +#define IOMUXC_GPR1 0x04 +#define IOMUXC_GPR2 0x08 +#define IOMUXC_GPR3 0x0c +#define IOMUXC_GPR4 0x10 +#define IOMUXC_GPR5 0x14 +#define IOMUXC_GPR6 0x18 +#define IOMUXC_GPR7 0x1c +#define IOMUXC_GPR8 0x20 +#define IOMUXC_GPR9 0x24 +#define IOMUXC_GPR10 0x28 +#define IOMUXC_GPR11 0x2c +#define IOMUXC_GPR12 0x30 +#define IOMUXC_GPR13 0x34 +#define IOMUXC_GPR14 0x38 +#define IOMUXC_GPR15 0x3c +#define IOMUXC_GPR16 0x40 +#define IOMUXC_GPR17 0x44 +#define IOMUXC_GPR18 0x48 +#define IOMUXC_GPR19 0x4c +#define IOMUXC_GPR20 0x50 +#define IOMUXC_GPR21 0x54 +#define IOMUXC_GPR22 0x58 + +/* For imx7d iomux gpr register field define */ +#define IMX7D_GPR1_IRQ_MASK (0x1 << 12) +#define IMX7D_GPR1_ENET1_TX_CLK_SEL_MASK (0x1 << 13) +#define IMX7D_GPR1_ENET2_TX_CLK_SEL_MASK (0x1 << 14) +#define IMX7D_GPR1_ENET_TX_CLK_SEL_MASK (0x3 << 13) +#define IMX7D_GPR1_ENET1_CLK_DIR_MASK (0x1 << 17) +#define IMX7D_GPR1_ENET2_CLK_DIR_MASK (0x1 << 18) +#define IMX7D_GPR1_ENET_CLK_DIR_MASK (0x3 << 17) + +#define IMX7D_GPR5_CSI_MUX_CONTROL_MIPI (0x1 << 4) + +#endif /* __LINUX_IMX7_IOMUXC_GPR_H */ -- cgit v1.2.3 From f15a66e68422ca6bb783142780ad440067f6cc89 Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Sat, 5 Sep 2015 11:22:39 +0200 Subject: drm: Spell vga_switcheroo consistently Currently everyone and their dog has their own favourite spelling for vga_switcheroo. This makes it hard to grep dmesg for log entries relating to vga_switcheroo. It also makes it hard to find related source files in the tree. vga_switcheroo.c uses pr_fmt "vga_switcheroo". Use that everywhere. Signed-off-by: Lukas Wunner Signed-off-by: Daniel Vetter --- include/linux/fb.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fb.h b/include/linux/fb.h index bc9afa74ee11..be40dbaed11e 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -156,7 +156,7 @@ struct fb_cursor_user { #define FB_EVENT_GET_REQ 0x0D /* Unbind from the console if possible */ #define FB_EVENT_FB_UNBIND 0x0E -/* CONSOLE-SPECIFIC: remap all consoles to new fb - for vga switcheroo */ +/* CONSOLE-SPECIFIC: remap all consoles to new fb - for vga_switcheroo */ #define FB_EVENT_REMAP_ALL_CONSOLE 0x0F /* A hardware display blank early change occured */ #define FB_EARLY_EVENT_BLANK 0x10 -- cgit v1.2.3 From 21b45676b7c4b79334d8fe3c5a112af0517b66e9 Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Thu, 27 Aug 2015 16:43:43 +0200 Subject: vga_switcheroo: Set active attribute to false for audio clients The active attribute in struct vga_switcheroo_client denotes whether the outputs are currently switched to this client. The attribute is only meaningful for vga clients. It is never used for audio clients. The function vga_switcheroo_register_audio_client() misuses this attribute to store whether the audio device is fully initialized. Most likely there was a misunderstanding about the meaning of "active" when this was added. Comment from Takashi's review: "Not really. The full initialization of audio was meant that the audio is active indeed. Admittedly, though, the active flag for each audio client doesn't play any role because the audio always follows the gfx state changes, and the value passed there doesn't reflect the actual state due to the later change. So, I agree with the removal of the flag itself -- or let the audio active flag following the corresponding gfx flag. The latter will make the proc output more consistent while the former is certainly more reduction of code." Set the active attribute to false for audio clients. Remove the active parameter from vga_switcheroo_register_audio_client() and its sole caller, hda_intel.c:register_vga_switcheroo(). vga_switcheroo_register_audio_client() was introduced by 3e9e63dbd374 ("vga_switcheroo: Add the support for audio clients"). Its use in hda_intel.c was introduced by a82d51ed24bb ("ALSA: hda - Support VGA-switcheroo"). v1.1: The changes above imply that in find_active_client() the call to client_is_vga() is now superfluous. Drop it. Cc: Takashi Iwai Signed-off-by: Lukas Wunner [danvet: Add Takashi's clarification to the commit message.] Reviewed-by: Takashi Iwai Signed-off-by: Daniel Vetter --- include/linux/vga_switcheroo.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/vga_switcheroo.h b/include/linux/vga_switcheroo.h index fe90bfc3b510..376499197717 100644 --- a/include/linux/vga_switcheroo.h +++ b/include/linux/vga_switcheroo.h @@ -128,7 +128,7 @@ int vga_switcheroo_register_client(struct pci_dev *dev, bool driver_power_control); int vga_switcheroo_register_audio_client(struct pci_dev *pdev, const struct vga_switcheroo_client_ops *ops, - int id, bool active); + int id); void vga_switcheroo_client_fb_set(struct pci_dev *dev, struct fb_info *info); @@ -154,7 +154,7 @@ static inline void vga_switcheroo_client_fb_set(struct pci_dev *dev, struct fb_i static inline int vga_switcheroo_register_handler(struct vga_switcheroo_handler *handler) { return 0; } static inline int vga_switcheroo_register_audio_client(struct pci_dev *pdev, const struct vga_switcheroo_client_ops *ops, - int id, bool active) { return 0; } + int id) { return 0; } static inline void vga_switcheroo_unregister_handler(void) {} static inline int vga_switcheroo_process_delayed_switch(void) { return 0; } static inline int vga_switcheroo_get_client_state(struct pci_dev *dev) { return VGA_SWITCHEROO_ON; } -- cgit v1.2.3 From 8cb7cf56c9fe5412de238465b27ef35b4d2801aa Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Mon, 30 Mar 2015 10:59:52 +0100 Subject: firmware: add support for ARM System Control and Power Interface(SCPI) protocol This patch adds support for System Control and Power Interface (SCPI) Message Protocol used between the Application Cores(AP) and the System Control Processor(SCP). The MHU peripheral provides a mechanism for inter-processor communication between SCP's M3 processor and AP. SCP offers control and management of the core/cluster power states, various power domain DVFS including the core/cluster, certain system clocks configuration, thermal sensors and many others. This protocol driver provides interface for all the client drivers using SCPI to make use of the features offered by the SCP. Signed-off-by: Sudeep Holla Reviewed-by: Jon Medhurst (Tixy) Cc: Jassi Brar Cc: Liviu Dudau Cc: Lorenzo Pieralisi --- include/linux/scpi_protocol.h | 61 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) create mode 100644 include/linux/scpi_protocol.h (limited to 'include/linux') diff --git a/include/linux/scpi_protocol.h b/include/linux/scpi_protocol.h new file mode 100644 index 000000000000..e7169cd54e19 --- /dev/null +++ b/include/linux/scpi_protocol.h @@ -0,0 +1,61 @@ +/* + * SCPI Message Protocol driver header + * + * Copyright (C) 2014 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ +#include + +struct scpi_opp { + u32 freq; + u32 m_volt; +} __packed; + +struct scpi_dvfs_info { + unsigned int count; + unsigned int latency; /* in nanoseconds */ + struct scpi_opp *opps; +}; + +/** + * struct scpi_ops - represents the various operations provided + * by SCP through SCPI message protocol + * @get_version: returns the major and minor revision on the SCPI + * message protocol + * @clk_get_range: gets clock range limit(min - max in Hz) + * @clk_get_val: gets clock value(in Hz) + * @clk_set_val: sets the clock value, setting to 0 will disable the + * clock (if supported) + * @dvfs_get_idx: gets the Operating Point of the given power domain. + * OPP is an index to the list return by @dvfs_get_info + * @dvfs_set_idx: sets the Operating Point of the given power domain. + * OPP is an index to the list return by @dvfs_get_info + * @dvfs_get_info: returns the DVFS capabilities of the given power + * domain. It includes the OPP list and the latency information + */ +struct scpi_ops { + u32 (*get_version)(void); + int (*clk_get_range)(u16, unsigned long *, unsigned long *); + unsigned long (*clk_get_val)(u16); + int (*clk_set_val)(u16, unsigned long); + int (*dvfs_get_idx)(u8); + int (*dvfs_set_idx)(u8, u8); + struct scpi_dvfs_info *(*dvfs_get_info)(u8); +}; + +#if IS_ENABLED(CONFIG_ARM_SCPI_PROTOCOL) +struct scpi_ops *get_scpi_ops(void); +#else +static inline struct scpi_ops *get_scpi_ops(void) { return NULL; } +#endif -- cgit v1.2.3 From 9290a16cf19301224556bc7bcb913c0c2a45bb9a Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 21 Aug 2015 11:48:37 +0000 Subject: dmaengine: OF DMAEngine API based on CONFIG_DMA_OF instead of CONFIG_OF 5fa422c ("dmaengine: move drivers/of/dma.c -> drivers/dma/of-dma.c") moved OF base DMAEngine code to of-dma.c, then it based on CONFIG_DMA_OF. But, OF base DMAEngine API on of_dma.h still based on CONFIG_OF now. So, current kernel can't find OF base DMAEngine API if .config has CONFIG_OF, but not have CONFIG_DMA_OF. This patch tidyup it. Signed-off-by: Kuninori Morimoto Signed-off-by: Vinod Koul --- include/linux/of_dma.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/of_dma.h b/include/linux/of_dma.h index 98ba7525929e..36112cdd665a 100644 --- a/include/linux/of_dma.h +++ b/include/linux/of_dma.h @@ -34,7 +34,7 @@ struct of_dma_filter_info { dma_filter_fn filter_fn; }; -#ifdef CONFIG_OF +#ifdef CONFIG_DMA_OF extern int of_dma_controller_register(struct device_node *np, struct dma_chan *(*of_dma_xlate) (struct of_phandle_args *, struct of_dma *), -- cgit v1.2.3 From 068654c200cc32966ce7906ca0bd096b9b97e988 Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Tue, 26 May 2015 16:49:01 +0100 Subject: drivers: firmware: psci: move power_state handling to generic code Functions implemented on arm64 to check if a power_state parameter is valid and if the power_state implies context loss are not arm64 specific and should be moved to generic code so that they can be reused on arm systems too. This patch moves the functions handling the power_state parameter to generic PSCI firmware layer code. Signed-off-by: Lorenzo Pieralisi Acked-by: Will Deacon Acked-by: Sudeep Holla Tested-by: Jisheng Zhang Cc: Catalin Marinas Cc: Mark Rutland --- include/linux/psci.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/psci.h b/include/linux/psci.h index a682fcc91c33..12c4865457ad 100644 --- a/include/linux/psci.h +++ b/include/linux/psci.h @@ -21,6 +21,8 @@ #define PSCI_POWER_STATE_TYPE_POWER_DOWN 1 bool psci_tos_resident_on(int cpu); +bool psci_power_state_loses_context(u32 state); +bool psci_power_state_is_valid(u32 state); struct psci_operations { int (*cpu_suspend)(u32 state, unsigned long entry_point); -- cgit v1.2.3 From 7d8d05d11473a169ab4d53bc7fc23d1fe3f1959f Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Sun, 16 Aug 2015 11:23:46 +0200 Subject: misc: atmel_tclib: get and use slow clock Commit dca1a4b5ff6e ("clk: at91: keep slow clk enabled to prevent system hang") added a workaround for the slow clock as it is not properly handled by its users. Get and use the slow clock as it is necessary for the timer counters. Signed-off-by: Boris Brezillon Signed-off-by: Alexandre Belloni Acked-by: Greg Kroah-Hartman Acked-by: Daniel Lezcano Acked-by: Thierry Reding --- include/linux/atmel_tc.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/atmel_tc.h b/include/linux/atmel_tc.h index b87c1c7c242a..468fdfa643f0 100644 --- a/include/linux/atmel_tc.h +++ b/include/linux/atmel_tc.h @@ -67,6 +67,7 @@ struct atmel_tc { const struct atmel_tcb_config *tcb_config; int irq[3]; struct clk *clk[3]; + struct clk *slow_clk; struct list_head node; bool allocated; }; -- cgit v1.2.3 From 7f5028cf6190407b7a632b0f30b83187577824cc Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Emilio=20L=C3=B3pez?= Date: Mon, 21 Sep 2015 10:38:20 -0300 Subject: sysfs: Support is_visible() on binary attributes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to the sysfs header file: "The returned value will replace static permissions defined in struct attribute or struct bin_attribute." but this isn't the case, as is_visible is only called on struct attribute only. This patch introduces a new is_bin_visible() function to implement the same functionality for binary attributes, and updates documentation accordingly. Note that to keep functionality and code similar to that of normal attributes, the mode is now checked as well to ensure it contains only read/write permissions or SYSFS_PREALLOC. Reviewed-by: Guenter Roeck Signed-off-by: Emilio López Acked-by: Greg Kroah-Hartman Signed-off-by: Olof Johansson --- include/linux/sysfs.h | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h index 9f65758311a4..2f66050d073b 100644 --- a/include/linux/sysfs.h +++ b/include/linux/sysfs.h @@ -64,10 +64,18 @@ do { \ * a new subdirectory with this name. * @is_visible: Optional: Function to return permissions associated with an * attribute of the group. Will be called repeatedly for each - * attribute in the group. Only read/write permissions as well as - * SYSFS_PREALLOC are accepted. Must return 0 if an attribute is - * not visible. The returned value will replace static permissions - * defined in struct attribute or struct bin_attribute. + * non-binary attribute in the group. Only read/write + * permissions as well as SYSFS_PREALLOC are accepted. Must + * return 0 if an attribute is not visible. The returned value + * will replace static permissions defined in struct attribute. + * @is_bin_visible: + * Optional: Function to return permissions associated with a + * binary attribute of the group. Will be called repeatedly + * for each binary attribute in the group. Only read/write + * permissions as well as SYSFS_PREALLOC are accepted. Must + * return 0 if a binary attribute is not visible. The returned + * value will replace static permissions defined in + * struct bin_attribute. * @attrs: Pointer to NULL terminated list of attributes. * @bin_attrs: Pointer to NULL terminated list of binary attributes. * Either attrs or bin_attrs or both must be provided. @@ -76,6 +84,8 @@ struct attribute_group { const char *name; umode_t (*is_visible)(struct kobject *, struct attribute *, int); + umode_t (*is_bin_visible)(struct kobject *, + struct bin_attribute *, int); struct attribute **attrs; struct bin_attribute **bin_attrs; }; -- cgit v1.2.3 From 18800fc7a04e7df8a345e7ef4fc3064368276f83 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Emilio=20L=C3=B3pez?= Date: Mon, 21 Sep 2015 10:38:22 -0300 Subject: platform/chrome: Support reading/writing the vboot context MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some EC implementations include a small nvram space used to store verified boot context data. This patch offers a way to expose this data to userspace. Reviewed-by: Javier Martinez Canillas Signed-off-by: Emilio López Signed-off-by: Olof Johansson --- include/linux/mfd/cros_ec.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h index da72671a42fa..494682ce4bf3 100644 --- a/include/linux/mfd/cros_ec.h +++ b/include/linux/mfd/cros_ec.h @@ -255,5 +255,6 @@ int cros_ec_query_all(struct cros_ec_device *ec_dev); /* sysfs stuff */ extern struct attribute_group cros_ec_attr_group; extern struct attribute_group cros_ec_lightbar_attr_group; +extern struct attribute_group cros_ec_vbc_attr_group; #endif /* __LINUX_MFD_CROS_EC_H */ -- cgit v1.2.3 From edc1b01cd3b20a5fff049e98f82a2b0d24a34c89 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 5 Oct 2015 10:53:49 -0400 Subject: SUNRPC: Move TCP receive data path into a workqueue context Stream protocols such as TCP can often build up a backlog of data to be read due to ordering. Combine this with the fact that some workloads such as NFS read()-intensive workloads need to receive a lot of data per RPC call, and it turns out that receiving the data from inside a softirq context can cause starvation. The following patch moves the TCP data receive into a workqueue context. We still end up calling tcp_read_sock(), but we do so from a process context, meaning that softirqs are enabled for most of the time. With this patch, I see a doubling of read bandwidth when running a multi-threaded iozone workload between a virtual client and server setup. Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xprtsock.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sunrpc/xprtsock.h b/include/linux/sunrpc/xprtsock.h index 357e44c1a46b..0ece4ba06f06 100644 --- a/include/linux/sunrpc/xprtsock.h +++ b/include/linux/sunrpc/xprtsock.h @@ -44,6 +44,8 @@ struct sock_xprt { */ unsigned long sock_state; struct delayed_work connect_worker; + struct work_struct recv_worker; + struct mutex recv_mutex; struct sockaddr_storage srcaddr; unsigned short srcport; -- cgit v1.2.3 From 516285ebe0efadc40b914a0e61a913a390604810 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sun, 20 Sep 2015 16:15:24 -0400 Subject: NFSv4: nfs4_async_handle_error should take a non-const nfs_server For symmetry with the synchronous handler, and so that we can potentially handle errors such as NFS4ERR_BADNAME. Signed-off-by: Trond Myklebust --- include/linux/nfs_xdr.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 52faf7e96c65..53f2acc68baf 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -528,7 +528,7 @@ struct nfs4_delegreturnargs { struct nfs4_delegreturnres { struct nfs4_sequence_res seq_res; struct nfs_fattr * fattr; - const struct nfs_server *server; + struct nfs_server *server; }; /* @@ -601,7 +601,7 @@ struct nfs_removeargs { struct nfs_removeres { struct nfs4_sequence_res seq_res; - const struct nfs_server *server; + struct nfs_server *server; struct nfs_fattr *dir_attr; struct nfs4_change_info cinfo; }; @@ -619,7 +619,7 @@ struct nfs_renameargs { struct nfs_renameres { struct nfs4_sequence_res seq_res; - const struct nfs_server *server; + struct nfs_server *server; struct nfs4_change_info old_cinfo; struct nfs_fattr *old_fattr; struct nfs4_change_info new_cinfo; -- cgit v1.2.3 From 38a1bdc9ff9f6c8cfad228eac5c1ce31ce038b25 Mon Sep 17 00:00:00 2001 From: Punit Agrawal Date: Fri, 19 Jun 2015 15:31:46 +0100 Subject: firmware: arm_scpi: Extend to support sensors ARM System Control Processor (SCP) provides an API to query and use the sensors available in the system. Extend the SCPI driver to support sensor messages. Signed-off-by: Punit Agrawal Acked-by: Sudeep Holla --- include/linux/scpi_protocol.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'include/linux') diff --git a/include/linux/scpi_protocol.h b/include/linux/scpi_protocol.h index e7169cd54e19..80af3cd35ae4 100644 --- a/include/linux/scpi_protocol.h +++ b/include/linux/scpi_protocol.h @@ -28,6 +28,20 @@ struct scpi_dvfs_info { struct scpi_opp *opps; }; +enum scpi_sensor_class { + TEMPERATURE, + VOLTAGE, + CURRENT, + POWER, +}; + +struct scpi_sensor_info { + u16 sensor_id; + u8 class; + u8 trigger_type; + char name[20]; +} __packed; + /** * struct scpi_ops - represents the various operations provided * by SCP through SCPI message protocol @@ -52,6 +66,9 @@ struct scpi_ops { int (*dvfs_get_idx)(u8); int (*dvfs_set_idx)(u8, u8); struct scpi_dvfs_info *(*dvfs_get_info)(u8); + int (*sensor_get_capability)(u16 *sensors); + int (*sensor_get_info)(u16 sensor_id, struct scpi_sensor_info *); + int (*sensor_get_value)(u16, u32 *); }; #if IS_ENABLED(CONFIG_ARM_SCPI_PROTOCOL) -- cgit v1.2.3 From 9a764234eee689ea800424ab99b08ff07a8bdbcd Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 14 Sep 2015 12:09:34 -0700 Subject: soc: brcmstb: Add Bus Interface Unit control setup Broadcom STB SoCs (brcmstb) require an early setup of their Bus Interface Unit control register, this needs to happen before SMP is brought up because it affects how the CPU complex will be interfaced to the memory controller. Add support code which properly initializes the BIU registers based on whether "brcm,write-pairing" is present in Device Tree, and take care of saving and restoring credit register settings during system-wide suspend/resume operations. Acked-by: Gregory Fong Signed-off-by: Florian Fainelli --- include/linux/soc/brcmstb/brcmstb.h | 10 ++++++++++ 1 file changed, 10 insertions(+) create mode 100644 include/linux/soc/brcmstb/brcmstb.h (limited to 'include/linux') diff --git a/include/linux/soc/brcmstb/brcmstb.h b/include/linux/soc/brcmstb/brcmstb.h new file mode 100644 index 000000000000..337ce414e898 --- /dev/null +++ b/include/linux/soc/brcmstb/brcmstb.h @@ -0,0 +1,10 @@ +#ifndef __BRCMSTB_SOC_H +#define __BRCMSTB_SOC_H + +/* + * Bus Interface Unit control register setup, must happen early during boot, + * before SMP is brought up, called by machine entry point. + */ +void brcmstb_biuctrl_init(void); + +#endif /* __BRCMSTB_SOC_H */ -- cgit v1.2.3 From a639315d6c536c806724c9328941a2517507e3e3 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 15 Sep 2015 02:14:03 -0400 Subject: pmem: kill memremap_pmem() Now that the pmem-api is defined as "a set of apis that enables access to WB mapped pmem", the mapping type is implied. Remove the wrapper and push the functionality down into the pmem driver in preparation for adding support for direct-mapped pmem. Reviewed-by: Christoph Hellwig Signed-off-by: Dan Williams --- include/linux/pmem.h | 26 +------------------------- 1 file changed, 1 insertion(+), 25 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pmem.h b/include/linux/pmem.h index 85f810b33917..acfea8ce4a07 100644 --- a/include/linux/pmem.h +++ b/include/linux/pmem.h @@ -65,11 +65,6 @@ static inline void memcpy_from_pmem(void *dst, void __pmem const *src, size_t si memcpy(dst, (void __force const *) src, size); } -static inline void memunmap_pmem(struct device *dev, void __pmem *addr) -{ - devm_memunmap(dev, (void __force *) addr); -} - static inline bool arch_has_pmem_api(void) { return IS_ENABLED(CONFIG_ARCH_HAS_PMEM_API); @@ -93,7 +88,7 @@ static inline bool arch_has_wmb_pmem(void) * These defaults seek to offer decent performance and minimize the * window between i/o completion and writes being durable on media. * However, it is undefined / architecture specific whether - * default_memremap_pmem + default_memcpy_to_pmem is sufficient for + * ARCH_MEMREMAP_PMEM + default_memcpy_to_pmem is sufficient for * making data durable relative to i/o completion. */ static inline void default_memcpy_to_pmem(void __pmem *dst, const void *src, @@ -116,25 +111,6 @@ static inline void default_clear_pmem(void __pmem *addr, size_t size) memset((void __force *)addr, 0, size); } -/** - * memremap_pmem - map physical persistent memory for pmem api - * @offset: physical address of persistent memory - * @size: size of the mapping - * - * Establish a mapping of the architecture specific memory type expected - * by memcpy_to_pmem() and wmb_pmem(). For example, it may be - * the case that an uncacheable or writethrough mapping is sufficient, - * or a writeback mapping provided memcpy_to_pmem() and - * wmb_pmem() arrange for the data to be written through the - * cache to persistent media. - */ -static inline void __pmem *memremap_pmem(struct device *dev, - resource_size_t offset, unsigned long size) -{ - return (void __pmem *) devm_memremap(dev, offset, size, - ARCH_MEMREMAP_PMEM); -} - /** * memcpy_to_pmem - copy data to persistent memory * @dst: destination buffer for the copy -- cgit v1.2.3 From 7c683941f30a977c10ec6be174ec5f16939c7ce5 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 5 Oct 2015 20:35:55 -0400 Subject: devm: make allocations numa aware by default Given we already have a device just use dev_to_node() to provide hint allocations for devres. However, current devres_alloc() users will need to explicitly opt-in with devres_alloc_node(). Reviewed-by: Tejun Heo Reviewed-by: Christoph Hellwig Signed-off-by: Dan Williams --- include/linux/device.h | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/device.h b/include/linux/device.h index 5d7bc6349930..b8f411b57dcb 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -604,13 +604,21 @@ typedef void (*dr_release_t)(struct device *dev, void *res); typedef int (*dr_match_t)(struct device *dev, void *res, void *match_data); #ifdef CONFIG_DEBUG_DEVRES -extern void *__devres_alloc(dr_release_t release, size_t size, gfp_t gfp, - const char *name); +extern void *__devres_alloc_node(dr_release_t release, size_t size, gfp_t gfp, + int nid, const char *name); #define devres_alloc(release, size, gfp) \ - __devres_alloc(release, size, gfp, #release) + __devres_alloc_node(release, size, gfp, NUMA_NO_NODE, #release) +#define devres_alloc_node(release, size, gfp, nid) \ + __devres_alloc_node(release, size, gfp, nid, #release) #else -extern void *devres_alloc(dr_release_t release, size_t size, gfp_t gfp); +extern void *devres_alloc_node(dr_release_t release, size_t size, gfp_t gfp, + int nid); +static inline void *devres_alloc(dr_release_t release, size_t size, gfp_t gfp) +{ + return devres_alloc_node(release, size, gfp, NUMA_NO_NODE); +} #endif + extern void devres_for_each_res(struct device *dev, dr_release_t release, dr_match_t match, void *match_data, void (*fn)(struct device *, void *, void *), -- cgit v1.2.3 From e866a2e3950fe2f708d5cc67d641b1725ef7a708 Mon Sep 17 00:00:00 2001 From: Rasmus Villemoes Date: Thu, 1 Oct 2015 23:45:31 +0200 Subject: linux/thermal.h: rename KELVIN_TO_CELSIUS to DECI_KELVIN_TO_CELSIUS The macros KELVIN_TO_CELSIUS and CELSIUS_TO_KELVIN actually convert between deciKelvins and Celsius, so rename them to reflect that. While at it, use a statement expression in DECI_KELVIN_TO_CELSIUS to prevent expanding the argument multiple times and get rid of a few casts. Signed-off-by: Rasmus Villemoes Acked-by: Darren Hart Signed-off-by: Zhang Rui --- include/linux/thermal.h | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 157d366e761b..4014a59828fc 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -44,9 +44,11 @@ #define THERMAL_WEIGHT_DEFAULT 0 /* Unit conversion macros */ -#define KELVIN_TO_CELSIUS(t) (long)(((long)t-2732 >= 0) ? \ - ((long)t-2732+5)/10 : ((long)t-2732-5)/10) -#define CELSIUS_TO_KELVIN(t) ((t)*10+2732) +#define DECI_KELVIN_TO_CELSIUS(t) ({ \ + long _t = (t); \ + ((_t-2732 >= 0) ? (_t-2732+5)/10 : (_t-2732-5)/10); \ +}) +#define CELSIUS_TO_DECI_KELVIN(t) ((t)*10+2732) #define DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(t, off) (((t) - (off)) * 100) #define DECI_KELVIN_TO_MILLICELSIUS(t) DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(t, 2732) #define MILLICELSIUS_TO_DECI_KELVIN_WITH_OFFSET(t, off) (((t) / 100) + (off)) -- cgit v1.2.3 From 0ad95472bf169a3501991f8f33f5147f792a8116 Mon Sep 17 00:00:00 2001 From: Andrey Ryabinin Date: Wed, 23 Sep 2015 15:49:29 +0300 Subject: lockd: create NSM handles per net namespace Commit cb7323fffa85 ("lockd: create and use per-net NSM RPC clients on MON/UNMON requests") introduced per-net NSM RPC clients. Unfortunately this doesn't make any sense without per-net nsm_handle. E.g. the following scenario could happen Two hosts (X and Y) in different namespaces (A and B) share the same nsm struct. 1. nsm_monitor(host_X) called => NSM rpc client created, nsm->sm_monitored bit set. 2. nsm_mointor(host-Y) called => nsm->sm_monitored already set, we just exit. Thus in namespace B ln->nsm_clnt == NULL. 3. host X destroyed => nsm->sm_count decremented to 1 4. host Y destroyed => nsm_unmonitor() => nsm_mon_unmon() => NULL-ptr dereference of *ln->nsm_clnt So this could be fixed by making per-net nsm_handles list, instead of global. Thus different net namespaces will not be able share the same nsm_handle. Signed-off-by: Andrey Ryabinin Cc: Signed-off-by: J. Bruce Fields --- include/linux/lockd/lockd.h | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/lockd/lockd.h b/include/linux/lockd/lockd.h index ff82a32871b5..fd3b65bf51b5 100644 --- a/include/linux/lockd/lockd.h +++ b/include/linux/lockd/lockd.h @@ -235,7 +235,8 @@ void nlm_rebind_host(struct nlm_host *); struct nlm_host * nlm_get_host(struct nlm_host *); void nlm_shutdown_hosts(void); void nlm_shutdown_hosts_net(struct net *net); -void nlm_host_rebooted(const struct nlm_reboot *); +void nlm_host_rebooted(const struct net *net, + const struct nlm_reboot *); /* * Host monitoring @@ -243,11 +244,13 @@ void nlm_host_rebooted(const struct nlm_reboot *); int nsm_monitor(const struct nlm_host *host); void nsm_unmonitor(const struct nlm_host *host); -struct nsm_handle *nsm_get_handle(const struct sockaddr *sap, +struct nsm_handle *nsm_get_handle(const struct net *net, + const struct sockaddr *sap, const size_t salen, const char *hostname, const size_t hostname_len); -struct nsm_handle *nsm_reboot_lookup(const struct nlm_reboot *info); +struct nsm_handle *nsm_reboot_lookup(const struct net *net, + const struct nlm_reboot *info); void nsm_release(struct nsm_handle *nsm); /* -- cgit v1.2.3 From 870823e629ea194e6cf8e82a9694ac62cad49512 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sat, 3 Oct 2015 15:32:37 +0200 Subject: configfs: add show and store methods to struct configfs_attribute Add methods to struct configfs_attribute to directly show and store attributes without adding boilerplate code to every user. In addition to the methods this also adds 3 helper macros to define read/write, read-only and write-only attributes with a single line of code. Signed-off-by: Christoph Hellwig Reviewed-by: Nicholas Bellinger Acked-by: Greg Kroah-Hartman Signed-off-by: Nicholas Bellinger --- include/linux/configfs.h | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'include/linux') diff --git a/include/linux/configfs.h b/include/linux/configfs.h index 63a36e89d0eb..85e9956a86de 100644 --- a/include/linux/configfs.h +++ b/include/linux/configfs.h @@ -125,8 +125,35 @@ struct configfs_attribute { const char *ca_name; struct module *ca_owner; umode_t ca_mode; + ssize_t (*show)(struct config_item *, char *); + ssize_t (*store)(struct config_item *, const char *, size_t); }; +#define CONFIGFS_ATTR(_pfx, _name) \ +static struct configfs_attribute _pfx##attr_##_name = { \ + .ca_name = __stringify(_name), \ + .ca_mode = S_IRUGO | S_IWUSR, \ + .ca_owner = THIS_MODULE, \ + .show = _pfx##_name##_show, \ + .store = _pfx##_name##_store, \ +} + +#define CONFIGFS_ATTR_RO(_pfx, _name) \ +static struct configfs_attribute _pfx##attr_##_name = { \ + .ca_name = __stringify(_name), \ + .ca_mode = S_IRUGO, \ + .ca_owner = THIS_MODULE, \ + .show = _pfx##_name##_show, \ +} + +#define CONFIGFS_ATTR_WO(_pfx, _name) \ +static struct configfs_attribute _pfx##attr_##_name = { \ + .ca_name = __stringify(_name), \ + .ca_mode = S_IWUSR, \ + .ca_owner = THIS_MODULE, \ + .store = _pfx##_name##_store, \ +} + /* * Users often need to create attribute structures for their configurable * attributes, containing a configfs_attribute member and function pointers -- cgit v1.2.3 From 45b6a73f62ebcf3ff067895fb8030e67f4c7b67f Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sat, 3 Oct 2015 15:32:38 +0200 Subject: usb-gadget: use per-attribute show and store methods To simplify the configfs interface and remove boilerplate code that also causes binary bloat. Signed-off-by: Christoph Hellwig Reviewed-by: Andrzej Pietrasiewicz Acked-by: Felipe Balbi Signed-off-by: Nicholas Bellinger --- include/linux/usb/gadget_configfs.h | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/gadget_configfs.h b/include/linux/usb/gadget_configfs.h index d74c0ae989d5..c36e95730de1 100644 --- a/include/linux/usb/gadget_configfs.h +++ b/include/linux/usb/gadget_configfs.h @@ -7,9 +7,10 @@ int check_user_usb_string(const char *name, struct usb_gadget_strings *stringtab_dev); #define GS_STRINGS_W(__struct, __name) \ - static ssize_t __struct##_##__name##_store(struct __struct *gs, \ +static ssize_t __struct##_##__name##_store(struct config_item *item, \ const char *page, size_t len) \ { \ + struct __struct *gs = to_##__struct(item); \ int ret; \ \ ret = usb_string_copy(page, &gs->__name); \ @@ -19,30 +20,20 @@ int check_user_usb_string(const char *name, } #define GS_STRINGS_R(__struct, __name) \ - static ssize_t __struct##_##__name##_show(struct __struct *gs, \ - char *page) \ +static ssize_t __struct##_##__name##_show(struct config_item *item, char *page) \ { \ + struct __struct *gs = to_##__struct(item); \ return sprintf(page, "%s\n", gs->__name ?: ""); \ } -#define GS_STRING_ITEM_ATTR(struct_name, name) \ - static struct struct_name##_attribute struct_name##_##name = \ - __CONFIGFS_ATTR(name, S_IRUGO | S_IWUSR, \ - struct_name##_##name##_show, \ - struct_name##_##name##_store) - #define GS_STRINGS_RW(struct_name, _name) \ GS_STRINGS_R(struct_name, _name) \ GS_STRINGS_W(struct_name, _name) \ - GS_STRING_ITEM_ATTR(struct_name, _name) + CONFIGFS_ATTR(struct_name##_, _name) #define USB_CONFIG_STRING_RW_OPS(struct_in) \ - CONFIGFS_ATTR_OPS(struct_in); \ - \ static struct configfs_item_operations struct_in##_langid_item_ops = { \ .release = struct_in##_attr_release, \ - .show_attribute = struct_in##_attr_show, \ - .store_attribute = struct_in##_attr_store, \ }; \ \ static struct config_item_type struct_in##_langid_type = { \ -- cgit v1.2.3 From 517982229f78b2aebf00a8a337e84e8eeea70b8e Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sat, 3 Oct 2015 15:32:59 +0200 Subject: configfs: remove old API Remove the old show_attribute and store_attribute methods and update the documentation. Also replace the two C samples with a single new one in the proper samples directory where people expect to find it. Signed-off-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger --- include/linux/configfs.h | 82 ------------------------------------------------ 1 file changed, 82 deletions(-) (limited to 'include/linux') diff --git a/include/linux/configfs.h b/include/linux/configfs.h index 85e9956a86de..a8a335b7fce0 100644 --- a/include/linux/configfs.h +++ b/include/linux/configfs.h @@ -154,86 +154,6 @@ static struct configfs_attribute _pfx##attr_##_name = { \ .store = _pfx##_name##_store, \ } -/* - * Users often need to create attribute structures for their configurable - * attributes, containing a configfs_attribute member and function pointers - * for the show() and store() operations on that attribute. If they don't - * need anything else on the extended attribute structure, they can use - * this macro to define it The argument _item is the name of the - * config_item structure. - */ -#define CONFIGFS_ATTR_STRUCT(_item) \ -struct _item##_attribute { \ - struct configfs_attribute attr; \ - ssize_t (*show)(struct _item *, char *); \ - ssize_t (*store)(struct _item *, const char *, size_t); \ -} - -/* - * With the extended attribute structure, users can use this macro - * (similar to sysfs' __ATTR) to make defining attributes easier. - * An example: - * #define MYITEM_ATTR(_name, _mode, _show, _store) \ - * struct myitem_attribute childless_attr_##_name = \ - * __CONFIGFS_ATTR(_name, _mode, _show, _store) - */ -#define __CONFIGFS_ATTR(_name, _mode, _show, _store) \ -{ \ - .attr = { \ - .ca_name = __stringify(_name), \ - .ca_mode = _mode, \ - .ca_owner = THIS_MODULE, \ - }, \ - .show = _show, \ - .store = _store, \ -} -/* Here is a readonly version, only requiring a show() operation */ -#define __CONFIGFS_ATTR_RO(_name, _show) \ -{ \ - .attr = { \ - .ca_name = __stringify(_name), \ - .ca_mode = 0444, \ - .ca_owner = THIS_MODULE, \ - }, \ - .show = _show, \ -} - -/* - * With these extended attributes, the simple show_attribute() and - * store_attribute() operations need to call the show() and store() of the - * attributes. This is a common pattern, so we provide a macro to define - * them. The argument _item is the name of the config_item structure. - * This macro expects the attributes to be named "struct _attribute" - * and the function to_() to exist; - */ -#define CONFIGFS_ATTR_OPS(_item) \ -static ssize_t _item##_attr_show(struct config_item *item, \ - struct configfs_attribute *attr, \ - char *page) \ -{ \ - struct _item *_item = to_##_item(item); \ - struct _item##_attribute *_item##_attr = \ - container_of(attr, struct _item##_attribute, attr); \ - ssize_t ret = 0; \ - \ - if (_item##_attr->show) \ - ret = _item##_attr->show(_item, page); \ - return ret; \ -} \ -static ssize_t _item##_attr_store(struct config_item *item, \ - struct configfs_attribute *attr, \ - const char *page, size_t count) \ -{ \ - struct _item *_item = to_##_item(item); \ - struct _item##_attribute *_item##_attr = \ - container_of(attr, struct _item##_attribute, attr); \ - ssize_t ret = -EINVAL; \ - \ - if (_item##_attr->store) \ - ret = _item##_attr->store(_item, page, count); \ - return ret; \ -} - /* * If allow_link() exists, the item can symlink(2) out to other * items. If the item is a group, it may support mkdir(2). @@ -250,8 +170,6 @@ static ssize_t _item##_attr_store(struct config_item *item, \ */ struct configfs_item_operations { void (*release)(struct config_item *); - ssize_t (*show_attribute)(struct config_item *, struct configfs_attribute *,char *); - ssize_t (*store_attribute)(struct config_item *,struct configfs_attribute *,const char *, size_t); int (*allow_link)(struct config_item *src, struct config_item *target); int (*drop_link)(struct config_item *src, struct config_item *target); }; -- cgit v1.2.3 From d28c2b36d6027702585ca93773b3edd6e5f1a5bd Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 14 Oct 2015 14:42:44 +0300 Subject: ARM: common: edma: Remove unused functions We no longer have users for these functions so they can be removed. Remove also unused enums from the header file. Signed-off-by: Peter Ujfalusi Signed-off-by: Vinod Koul --- include/linux/platform_data/edma.h | 33 --------------------------------- 1 file changed, 33 deletions(-) (limited to 'include/linux') diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h index bdb2710e2aab..c1862423b356 100644 --- a/include/linux/platform_data/edma.h +++ b/include/linux/platform_data/edma.h @@ -72,20 +72,6 @@ struct edmacc_param { #define EDMA_DMA_TC1_ERROR 3 #define EDMA_DMA_TC2_ERROR 4 -enum address_mode { - INCR = 0, - FIFO = 1 -}; - -enum fifo_width { - W8BIT = 0, - W16BIT = 1, - W32BIT = 2, - W64BIT = 3, - W128BIT = 4, - W256BIT = 5 -}; - enum dma_event_q { EVENTQ_0 = 0, EVENTQ_1 = 1, @@ -94,11 +80,6 @@ enum dma_event_q { EVENTQ_DEFAULT = -1 }; -enum sync_dimension { - ASYNC = 0, - ABSYNC = 1 -}; - #define EDMA_CTLR_CHAN(ctlr, chan) (((ctlr) << 16) | (chan)) #define EDMA_CTLR(i) ((i) >> 16) #define EDMA_CHAN_SLOT(i) ((i) & 0xffff) @@ -121,22 +102,9 @@ void edma_free_channel(unsigned channel); int edma_alloc_slot(unsigned ctlr, int slot); void edma_free_slot(unsigned slot); -/* alloc/free a set of contiguous parameter RAM slots */ -int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count); -int edma_free_cont_slots(unsigned slot, int count); - /* calls that operate on part of a parameter RAM slot */ -void edma_set_src(unsigned slot, dma_addr_t src_port, - enum address_mode mode, enum fifo_width); -void edma_set_dest(unsigned slot, dma_addr_t dest_port, - enum address_mode mode, enum fifo_width); dma_addr_t edma_get_position(unsigned slot, bool dst); -void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx); -void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx); -void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt, - u16 bcnt_rld, enum sync_dimension sync_mode); void edma_link(unsigned from, unsigned to); -void edma_unlink(unsigned from); /* calls that operate on an entire parameter RAM slot */ void edma_write_slot(unsigned slot, const struct edmacc_param *params); @@ -146,7 +114,6 @@ void edma_read_slot(unsigned slot, struct edmacc_param *params); int edma_start(unsigned channel); void edma_stop(unsigned channel); void edma_clean_channel(unsigned channel); -void edma_clear_event(unsigned channel); void edma_pause(unsigned channel); void edma_resume(unsigned channel); -- cgit v1.2.3 From ca304fa9bb762f091e851d48de43f623c975d47a Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 14 Oct 2015 14:42:49 +0300 Subject: ARM/dmaengine: edma: Public API to use private struct pointer Instead of relying on indexes pointing to edma private date in the global pointer array, pass the private data pointer via the public API. Signed-off-by: Peter Ujfalusi Signed-off-by: Vinod Koul --- include/linux/platform_data/edma.h | 38 ++++++++++++++++++++++---------------- 1 file changed, 22 insertions(+), 16 deletions(-) (limited to 'include/linux') diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h index c1862423b356..466021c03169 100644 --- a/include/linux/platform_data/edma.h +++ b/include/linux/platform_data/edma.h @@ -92,32 +92,40 @@ enum dma_event_q { #define EDMA_MAX_CC 2 +struct edma; + +struct edma *edma_get_data(struct device *edma_dev); + /* alloc/free DMA channels and their dedicated parameter RAM slots */ -int edma_alloc_channel(int channel, +int edma_alloc_channel(struct edma *cc, int channel, void (*callback)(unsigned channel, u16 ch_status, void *data), void *data, enum dma_event_q); -void edma_free_channel(unsigned channel); +void edma_free_channel(struct edma *cc, unsigned channel); /* alloc/free parameter RAM slots */ -int edma_alloc_slot(unsigned ctlr, int slot); -void edma_free_slot(unsigned slot); +int edma_alloc_slot(struct edma *cc, int slot); +void edma_free_slot(struct edma *cc, unsigned slot); /* calls that operate on part of a parameter RAM slot */ -dma_addr_t edma_get_position(unsigned slot, bool dst); -void edma_link(unsigned from, unsigned to); +dma_addr_t edma_get_position(struct edma *cc, unsigned slot, bool dst); +void edma_link(struct edma *cc, unsigned from, unsigned to); /* calls that operate on an entire parameter RAM slot */ -void edma_write_slot(unsigned slot, const struct edmacc_param *params); -void edma_read_slot(unsigned slot, struct edmacc_param *params); +void edma_write_slot(struct edma *cc, unsigned slot, + const struct edmacc_param *params); +void edma_read_slot(struct edma *cc, unsigned slot, + struct edmacc_param *params); /* channel control operations */ -int edma_start(unsigned channel); -void edma_stop(unsigned channel); -void edma_clean_channel(unsigned channel); -void edma_pause(unsigned channel); -void edma_resume(unsigned channel); +int edma_start(struct edma *cc, unsigned channel); +void edma_stop(struct edma *cc, unsigned channel); +void edma_clean_channel(struct edma *cc, unsigned channel); +void edma_pause(struct edma *cc, unsigned channel); +void edma_resume(struct edma *cc, unsigned channel); +int edma_trigger_channel(struct edma *cc, unsigned channel); -void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no); +void edma_assign_channel_eventq(struct edma *cc, unsigned channel, + enum dma_event_q eventq_no); struct edma_rsv_info { @@ -141,6 +149,4 @@ struct edma_soc_info { const s16 (*xbar_chans)[2]; }; -int edma_trigger_channel(unsigned); - #endif -- cgit v1.2.3 From 2b6b3b7420190888793c49e97276e1e73bd7eaed Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 14 Oct 2015 14:42:53 +0300 Subject: ARM/dmaengine: edma: Merge the two drivers under drivers/dma/ Move the code out from arch/arm/common and merge it inside of the dmaengine driver. This change is done with as minimal (if eny) functional change to the code as possible to avoid introducing regression. Signed-off-by: Peter Ujfalusi Acked-by: Tony Lindgren Signed-off-by: Vinod Koul --- include/linux/platform_data/edma.h | 74 -------------------------------------- 1 file changed, 74 deletions(-) (limited to 'include/linux') diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h index 466021c03169..6b9d500956e4 100644 --- a/include/linux/platform_data/edma.h +++ b/include/linux/platform_data/edma.h @@ -41,37 +41,6 @@ #ifndef EDMA_H_ #define EDMA_H_ -/* PaRAM slots are laid out like this */ -struct edmacc_param { - u32 opt; - u32 src; - u32 a_b_cnt; - u32 dst; - u32 src_dst_bidx; - u32 link_bcntrld; - u32 src_dst_cidx; - u32 ccnt; -} __packed; - -/* fields in edmacc_param.opt */ -#define SAM BIT(0) -#define DAM BIT(1) -#define SYNCDIM BIT(2) -#define STATIC BIT(3) -#define EDMA_FWID (0x07 << 8) -#define TCCMODE BIT(11) -#define EDMA_TCC(t) ((t) << 12) -#define TCINTEN BIT(20) -#define ITCINTEN BIT(21) -#define TCCHEN BIT(22) -#define ITCCHEN BIT(23) - -/*ch_status paramater of callback function possible values*/ -#define EDMA_DMA_COMPLETE 1 -#define EDMA_DMA_CC_ERROR 2 -#define EDMA_DMA_TC1_ERROR 3 -#define EDMA_DMA_TC2_ERROR 4 - enum dma_event_q { EVENTQ_0 = 0, EVENTQ_1 = 1, @@ -84,49 +53,6 @@ enum dma_event_q { #define EDMA_CTLR(i) ((i) >> 16) #define EDMA_CHAN_SLOT(i) ((i) & 0xffff) -#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */ -#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */ -#define EDMA_CONT_PARAMS_ANY 1001 -#define EDMA_CONT_PARAMS_FIXED_EXACT 1002 -#define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003 - -#define EDMA_MAX_CC 2 - -struct edma; - -struct edma *edma_get_data(struct device *edma_dev); - -/* alloc/free DMA channels and their dedicated parameter RAM slots */ -int edma_alloc_channel(struct edma *cc, int channel, - void (*callback)(unsigned channel, u16 ch_status, void *data), - void *data, enum dma_event_q); -void edma_free_channel(struct edma *cc, unsigned channel); - -/* alloc/free parameter RAM slots */ -int edma_alloc_slot(struct edma *cc, int slot); -void edma_free_slot(struct edma *cc, unsigned slot); - -/* calls that operate on part of a parameter RAM slot */ -dma_addr_t edma_get_position(struct edma *cc, unsigned slot, bool dst); -void edma_link(struct edma *cc, unsigned from, unsigned to); - -/* calls that operate on an entire parameter RAM slot */ -void edma_write_slot(struct edma *cc, unsigned slot, - const struct edmacc_param *params); -void edma_read_slot(struct edma *cc, unsigned slot, - struct edmacc_param *params); - -/* channel control operations */ -int edma_start(struct edma *cc, unsigned channel); -void edma_stop(struct edma *cc, unsigned channel); -void edma_clean_channel(struct edma *cc, unsigned channel); -void edma_pause(struct edma *cc, unsigned channel); -void edma_resume(struct edma *cc, unsigned channel); -int edma_trigger_channel(struct edma *cc, unsigned channel); - -void edma_assign_channel_eventq(struct edma *cc, unsigned channel, - enum dma_event_q eventq_no); - struct edma_rsv_info { const s16 (*rsv_chans)[2]; -- cgit v1.2.3 From 1a7caca20ed56a80cea045327deaeb4e4379cbd1 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Fri, 28 Aug 2015 10:39:20 -0700 Subject: soc: qcom: smd: Implement id_table driver matching Implement a id_table based driver maching mechanism for drivers that binds to fixed channels and doesn't need any additional configuration, e.g. IPCRTR and DIAG. Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- include/linux/soc/qcom/smd.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/soc/qcom/smd.h b/include/linux/soc/qcom/smd.h index d7e50aa6a4ac..d0cb6d189a0a 100644 --- a/include/linux/soc/qcom/smd.h +++ b/include/linux/soc/qcom/smd.h @@ -8,6 +8,14 @@ struct qcom_smd; struct qcom_smd_channel; struct qcom_smd_lookup; +/** + * struct qcom_smd_id - struct used for matching a smd device + * @name: name of the channel + */ +struct qcom_smd_id { + char name[20]; +}; + /** * struct qcom_smd_device - smd device struct * @dev: the device struct @@ -21,6 +29,7 @@ struct qcom_smd_device { /** * struct qcom_smd_driver - smd driver struct * @driver: underlying device driver + * @smd_match_table: static channel match table * @probe: invoked when the smd channel is found * @remove: invoked when the smd channel is closed * @callback: invoked when an inbound message is received on the channel, @@ -29,6 +38,8 @@ struct qcom_smd_device { */ struct qcom_smd_driver { struct device_driver driver; + const struct qcom_smd_id *smd_match_table; + int (*probe)(struct qcom_smd_device *dev); void (*remove)(struct qcom_smd_device *dev); int (*callback)(struct qcom_smd_device *, const void *, size_t); -- cgit v1.2.3 From 1a03964dec3cecb6382d172b9dfe318735c2cad7 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 2 Sep 2015 15:46:44 -0700 Subject: soc: qcom: Make qcom_smem_get() return a pointer Passing a void ** almost always requires a cast at the call site. Instead of littering the code with casts every time this function is called, have qcom_smem_get() return a void pointer to the location of the smem item. This frees the caller from having to cast the pointer. Cc: Bjorn Andersson Signed-off-by: Stephen Boyd Reviewed-by: Bjorn Andersson Signed-off-by: Andy Gross --- include/linux/soc/qcom/smem.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/soc/qcom/smem.h b/include/linux/soc/qcom/smem.h index bc9630d3aced..785e196ee2ca 100644 --- a/include/linux/soc/qcom/smem.h +++ b/include/linux/soc/qcom/smem.h @@ -4,7 +4,7 @@ #define QCOM_SMEM_HOST_ANY -1 int qcom_smem_alloc(unsigned host, unsigned item, size_t size); -int qcom_smem_get(unsigned host, unsigned item, void **ptr, size_t *size); +void *qcom_smem_get(unsigned host, unsigned item, size_t *size); int qcom_smem_get_free_space(unsigned host); -- cgit v1.2.3 From 2d3c277ca5b1a9c12cde1f760ff925b87608bc76 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Tue, 29 Sep 2015 15:48:55 -0400 Subject: qcom-scm: add missing prototype for qcom_scm_is_available() Signed-off-by: Rob Clark Signed-off-by: Andy Gross --- include/linux/qcom_scm.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h index 6e7d5ec65838..9e12000914b3 100644 --- a/include/linux/qcom_scm.h +++ b/include/linux/qcom_scm.h @@ -23,6 +23,8 @@ struct qcom_scm_hdcp_req { u32 val; }; +extern bool qcom_scm_is_available(void); + extern bool qcom_scm_hdcp_available(void); extern int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp); -- cgit v1.2.3 From 36022770de6cf9a403c40a68712ed2d2ea2746be Mon Sep 17 00:00:00 2001 From: Peng Tao Date: Sat, 26 Sep 2015 02:24:34 +0800 Subject: nfs42: add CLONE xdr functions xdr definitions per draft-ietf-nfsv4-minorversion2-38.txt Signed-off-by: Peng Tao Signed-off-by: Trond Myklebust --- include/linux/nfs4.h | 2 ++ include/linux/nfs_xdr.h | 19 +++++++++++++++++++ 2 files changed, 21 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h index 00121f298269..c0c695b634d0 10