From c787f1baa5031c22cbe20af17b2ee36ad32957ea Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Fri, 7 Apr 2023 15:05:34 -0500 Subject: block: Add PR callouts for read keys and reservation Add callouts for reading keys and reservations. This allows LIO to support the READ_KEYS and READ_RESERVATION commands so it can export devices to VMs for software like windows clustering. Signed-off-by: Mike Christie Link: https://lore.kernel.org/r/20230407200551.12660-2-michael.christie@oracle.com Reviewed-by: Chaitanya Kulkarni Reviewed-by: Christoph Hellwig Reviewed-by: Bart Van Assche Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen --- include/linux/pr.h | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pr.h b/include/linux/pr.h index 94ceec713afe..3003daec28a5 100644 --- a/include/linux/pr.h +++ b/include/linux/pr.h @@ -4,6 +4,18 @@ #include +struct pr_keys { + u32 generation; + u32 num_keys; + u64 keys[]; +}; + +struct pr_held_reservation { + u64 key; + u32 generation; + enum pr_type type; +}; + struct pr_ops { int (*pr_register)(struct block_device *bdev, u64 old_key, u64 new_key, u32 flags); @@ -14,6 +26,19 @@ struct pr_ops { int (*pr_preempt)(struct block_device *bdev, u64 old_key, u64 new_key, enum pr_type type, bool abort); int (*pr_clear)(struct block_device *bdev, u64 key); + /* + * pr_read_keys - Read the registered keys and return them in the + * pr_keys->keys array. The keys array will have been allocated at the + * end of the pr_keys struct, and pr_keys->num_keys must be set to the + * number of keys the array can hold. If there are more than can fit + * in the array, success will still be returned and pr_keys->num_keys + * will reflect the total number of keys the device contains, so the + * caller can retry with a larger array. + */ + int (*pr_read_keys)(struct block_device *bdev, + struct pr_keys *keys_info); + int (*pr_read_reservation)(struct block_device *bdev, + struct pr_held_reservation *rsv); }; #endif /* LINUX_PR_H */ -- cgit v1.2.3 From 7ba150834b840f6f5cdd07ca69a4ccf39df59a66 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Fri, 7 Apr 2023 15:05:35 -0500 Subject: block: Rename BLK_STS_NEXUS to BLK_STS_RESV_CONFLICT BLK_STS_NEXUS is used for NVMe/SCSI reservation conflicts and DASD's locking feature which works similar to NVMe/SCSI reservations where a host can get a lock on a device and when the lock is taken it will get failures. This patch renames BLK_STS_NEXUS so it better reflects this type of use. Signed-off-by: Mike Christie Link: https://lore.kernel.org/r/20230407200551.12660-3-michael.christie@oracle.com Acked-by: Stefan Haberland Reviewed-by: Bart Van Assche Reviewed-by: Chaitanya Kulkarni Reviewed-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen --- include/linux/blk_types.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h index 99be590f952f..2b2452086a2f 100644 --- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -96,7 +96,7 @@ typedef u16 blk_short_t; #define BLK_STS_NOSPC ((__force blk_status_t)3) #define BLK_STS_TRANSPORT ((__force blk_status_t)4) #define BLK_STS_TARGET ((__force blk_status_t)5) -#define BLK_STS_NEXUS ((__force blk_status_t)6) +#define BLK_STS_RESV_CONFLICT ((__force blk_status_t)6) #define BLK_STS_MEDIUM ((__force blk_status_t)7) #define BLK_STS_PROTECTION ((__force blk_status_t)8) #define BLK_STS_RESOURCE ((__force blk_status_t)9) @@ -184,7 +184,7 @@ static inline bool blk_path_error(blk_status_t error) case BLK_STS_NOTSUPP: case BLK_STS_NOSPC: case BLK_STS_TARGET: - case BLK_STS_NEXUS: + case BLK_STS_RESV_CONFLICT: case BLK_STS_MEDIUM: case BLK_STS_PROTECTION: return false; -- cgit v1.2.3 From f2bf2e7e2d526116aab942aaf1b71a949a570ba6 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Fri, 7 Apr 2023 15:05:40 -0500 Subject: nvme: Fix reservation status related structs This fixes the following issues with the reservation status structs: 1. resv10 is bytes 23:10 so it should be 14 bytes. 2. regctl_ds only supports 64 bit host IDs. These are not currently used, but will be in this patchset which adds support for the reservation report command. Signed-off-by: Mike Christie Link: https://lore.kernel.org/r/20230407200551.12660-8-michael.christie@oracle.com Reviewed-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen --- include/linux/nvme.h | 38 ++++++++++++++++++++++++++++++-------- 1 file changed, 30 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nvme.h b/include/linux/nvme.h index 4fad4aa245fb..57b5b2b8d95b 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -759,20 +759,42 @@ enum { NVME_LBART_ATTRIB_HIDE = 1 << 1, }; +struct nvme_registered_ctrl { + __le16 cntlid; + __u8 rcsts; + __u8 rsvd3[5]; + __le64 hostid; + __le64 rkey; +}; + struct nvme_reservation_status { __le32 gen; __u8 rtype; __u8 regctl[2]; __u8 resv5[2]; __u8 ptpls; - __u8 resv10[13]; - struct { - __le16 cntlid; - __u8 rcsts; - __u8 resv3[5]; - __le64 hostid; - __le64 rkey; - } regctl_ds[]; + __u8 resv10[14]; + struct nvme_registered_ctrl regctl_ds[]; +}; + +struct nvme_registered_ctrl_ext { + __le16 cntlid; + __u8 rcsts; + __u8 rsvd3[5]; + __le64 rkey; + __u8 hostid[16]; + __u8 rsvd32[32]; +}; + +struct nvme_reservation_status_ext { + __le32 gen; + __u8 rtype; + __u8 regctl[2]; + __u8 resv5[2]; + __u8 ptpls; + __u8 resv10[14]; + __u8 rsvd24[40]; + struct nvme_registered_ctrl_ext regctl_eds[]; }; enum nvme_async_event_type { -- cgit v1.2.3 From 5fd96a4e15de8442915a912233d800c56f49001d Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Fri, 7 Apr 2023 15:05:44 -0500 Subject: nvme: Add pr_ops read_keys support This patch adds support for the pr_ops read_keys callout by calling the NVMe Reservation Report helper, then parsing that info to get the controller's registered keys. Because the callout is only used in the kernel where the callers, like LIO, do not know about controller/host IDs, the callout just returns the registered keys which is required by the SCSI PR in READ KEYS command. Signed-off-by: Mike Christie Link: https://lore.kernel.org/r/20230407200551.12660-12-michael.christie@oracle.com Reviewed-by: Chaitanya Kulkarni Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen --- include/linux/nvme.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nvme.h b/include/linux/nvme.h index 57b5b2b8d95b..a617e250d629 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -759,6 +759,10 @@ enum { NVME_LBART_ATTRIB_HIDE = 1 << 1, }; +enum nvme_eds { + NVME_EXTENDED_DATA_STRUCT = 0x1, +}; + struct nvme_registered_ctrl { __le16 cntlid; __u8 rcsts; -- cgit v1.2.3 From be1a7cd2d0ed028ffdd60c65e3734e2a1d8b17df Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Fri, 7 Apr 2023 15:05:45 -0500 Subject: nvme: Add a nvme_pr_type enum The next patch adds support to report the reservation type, so we need to be able to convert from the NVMe PR value we get from the device to the linux block layer PR value that will be returned to callers. To prepare for that, this patch adds a nvme_pr_type enum and renames the nvme_pr_type function. Signed-off-by: Mike Christie Link: https://lore.kernel.org/r/20230407200551.12660-13-michael.christie@oracle.com Reviewed-by: Chaitanya Kulkarni Reviewed-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen --- include/linux/nvme.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nvme.h b/include/linux/nvme.h index a617e250d629..4013abb86642 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -759,6 +759,15 @@ enum { NVME_LBART_ATTRIB_HIDE = 1 << 1, }; +enum nvme_pr_type { + NVME_PR_WRITE_EXCLUSIVE = 1, + NVME_PR_EXCLUSIVE_ACCESS = 2, + NVME_PR_WRITE_EXCLUSIVE_REG_ONLY = 3, + NVME_PR_EXCLUSIVE_ACCESS_REG_ONLY = 4, + NVME_PR_WRITE_EXCLUSIVE_ALL_REGS = 5, + NVME_PR_EXCLUSIVE_ACCESS_ALL_REGS = 6, +}; + enum nvme_eds { NVME_EXTENDED_DATA_STRUCT = 0x1, }; -- cgit v1.2.3 From dffc480d2df1772d6092f46f2b4c5e0de941bd47 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Thu, 11 May 2023 03:13:36 +0200 Subject: scsi: block: Introduce BLK_STS_DURATION_LIMIT Introduce the new block I/O status BLK_STS_DURATION_LIMIT for LLDDs to report command that failed due to a command duration limit being exceeded. This new status is mapped to the ETIME error code to allow users to differentiate "soft" duration limit failures from other more serious hardware related errors. If we compare BLK_STS_DURATION_LIMIT with BLK_STS_TIMEOUT: -BLK_STS_DURATION_LIMIT means that the drive gave a reply indicating that the command duration limit was exceeded before the command could be completed. This I/O status is mapped to ETIME for user space. -BLK_STS_TIMEOUT means that the drive never gave a reply at all. This I/O status is mapped to ETIMEDOUT for user space. Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Co-developed-by: Niklas Cassel Signed-off-by: Niklas Cassel Link: https://lore.kernel.org/r/20230511011356.227789-4-nks@flawful.org Signed-off-by: Martin K. Petersen --- include/linux/blk_types.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h index 740afe80f297..dfdcd218aaac 100644 --- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -171,6 +171,12 @@ typedef u16 blk_short_t; */ #define BLK_STS_OFFLINE ((__force blk_status_t)17) +/* + * BLK_STS_DURATION_LIMIT is returned from the driver when the target device + * aborted the command because it exceeded one of its Command Duration Limits. + */ +#define BLK_STS_DURATION_LIMIT ((__force blk_status_t)18) + /** * blk_path_error - returns true if error may be path related * @error: status the request was completed with -- cgit v1.2.3 From 62e4a60e0cdb540b314061469e025fd834ff300c Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Thu, 11 May 2023 03:13:47 +0200 Subject: scsi: ata: libata: Detect support for command duration limits Use the supported capabilities identify device data log page to detect if a device supports the command duration limits feature. For devices supporting this feature, set the device flag ATA_DFLAG_CDL. To support SCSI-ATA translation, retrieve the command duration limits log page 18h and cache this page content using the cdl array added to the ata_device data structure. Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Co-developed-by: Niklas Cassel Signed-off-by: Niklas Cassel Link: https://lore.kernel.org/r/20230511011356.227789-15-nks@flawful.org Signed-off-by: Martin K. Petersen --- include/linux/ata.h | 5 ++++- include/linux/libata.h | 29 +++++++++++++++++------------ 2 files changed, 21 insertions(+), 13 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ata.h b/include/linux/ata.h index c224dbddb9b2..1eda46b63dcc 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -322,15 +322,18 @@ enum { ATA_LOG_SATA_NCQ = 0x10, ATA_LOG_NCQ_NON_DATA = 0x12, ATA_LOG_NCQ_SEND_RECV = 0x13, + ATA_LOG_CDL = 0x18, + ATA_LOG_CDL_SIZE = ATA_SECT_SIZE, ATA_LOG_IDENTIFY_DEVICE = 0x30, ATA_LOG_CONCURRENT_POSITIONING_RANGES = 0x47, /* Identify device log pages: */ + ATA_LOG_SUPPORTED_CAPABILITIES = 0x03, ATA_LOG_SECURITY = 0x06, ATA_LOG_SATA_SETTINGS = 0x08, ATA_LOG_ZONED_INFORMATION = 0x09, - /* Identify device SATA settings log:*/ + /* Identify device SATA settings log: */ ATA_LOG_DEVSLP_OFFSET = 0x30, ATA_LOG_DEVSLP_SIZE = 0x08, ATA_LOG_DEVSLP_MDAT = 0x00, diff --git a/include/linux/libata.h b/include/linux/libata.h index 311cd93377c7..e8a45f7f3f5c 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -94,17 +94,18 @@ enum { ATA_DFLAG_DMADIR = (1 << 10), /* device requires DMADIR */ ATA_DFLAG_NCQ_SEND_RECV = (1 << 11), /* device supports NCQ SEND and RECV */ ATA_DFLAG_NCQ_PRIO = (1 << 12), /* device supports NCQ priority */ - ATA_DFLAG_CFG_MASK = (1 << 13) - 1, - - ATA_DFLAG_PIO = (1 << 13), /* device limited to PIO mode */ - ATA_DFLAG_NCQ_OFF = (1 << 14), /* device limited to non-NCQ mode */ - ATA_DFLAG_SLEEPING = (1 << 15), /* device is sleeping */ - ATA_DFLAG_DUBIOUS_XFER = (1 << 16), /* data transfer not verified */ - ATA_DFLAG_NO_UNLOAD = (1 << 17), /* device doesn't support unload */ - ATA_DFLAG_UNLOCK_HPA = (1 << 18), /* unlock HPA */ - ATA_DFLAG_INIT_MASK = (1 << 19) - 1, - - ATA_DFLAG_NCQ_PRIO_ENABLED = (1 << 19), /* Priority cmds sent to dev */ + ATA_DFLAG_CDL = (1 << 13), /* supports cmd duration limits */ + ATA_DFLAG_CFG_MASK = (1 << 14) - 1, + + ATA_DFLAG_PIO = (1 << 14), /* device limited to PIO mode */ + ATA_DFLAG_NCQ_OFF = (1 << 15), /* device limited to non-NCQ mode */ + ATA_DFLAG_SLEEPING = (1 << 16), /* device is sleeping */ + ATA_DFLAG_DUBIOUS_XFER = (1 << 17), /* data transfer not verified */ + ATA_DFLAG_NO_UNLOAD = (1 << 18), /* device doesn't support unload */ + ATA_DFLAG_UNLOCK_HPA = (1 << 19), /* unlock HPA */ + ATA_DFLAG_INIT_MASK = (1 << 20) - 1, + + ATA_DFLAG_NCQ_PRIO_ENABLED = (1 << 20), /* Priority cmds sent to dev */ ATA_DFLAG_DETACH = (1 << 24), ATA_DFLAG_DETACHED = (1 << 25), ATA_DFLAG_DA = (1 << 26), /* device supports Device Attention */ @@ -115,7 +116,8 @@ enum { ATA_DFLAG_FEATURES_MASK = (ATA_DFLAG_TRUSTED | ATA_DFLAG_DA | \ ATA_DFLAG_DEVSLP | ATA_DFLAG_NCQ_SEND_RECV | \ - ATA_DFLAG_NCQ_PRIO | ATA_DFLAG_FUA), + ATA_DFLAG_NCQ_PRIO | ATA_DFLAG_FUA | \ + ATA_DFLAG_CDL), ATA_DEV_UNKNOWN = 0, /* unknown device */ ATA_DEV_ATA = 1, /* ATA device */ @@ -709,6 +711,9 @@ struct ata_device { /* Concurrent positioning ranges */ struct ata_cpr_log *cpr_log; + /* Command Duration Limits log support */ + u8 cdl[ATA_LOG_CDL_SIZE]; + /* error history */ int spdn_cnt; /* ering is CLEAR_END, read comment above CLEAR_END */ -- cgit v1.2.3 From df60f9c64576d6d05b59ec5c34addcd61ef1efb0 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Thu, 11 May 2023 03:13:50 +0200 Subject: scsi: ata: libata: Add ATA feature control sub-page translation Add support for the ATA feature control sub-page of the control mode page to enable/disable the command duration limits feature using the cdl_ctrl field of the ATA feature control sub-page. Both mode sense and mode select translation are supported. For mode sense, the ata device flag ATA_DFLAG_CDL_ENABLED is used to cache the status of the command duration limits feature. Enabling this feature is done using a SET FEATURES command with a cdl action set to 1 when the page cdl_ctrl field value is 0x2 (T2A and T2B pages supported). If this field is 0, CDL is disabled using the SET FEATURES command with a cdl action set to 0. Since a device CDL and NCQ priority features should not be used simultaneously, ata_mselect_control_ata_feature() returns an error when attempting to enable CDL with the device priority feature enabled. Conversely, the function ata_ncq_prio_enable_store() used to enable the use of the device NCQ priority feature through sysfs is modified to return an error if the device CDL feature is enabled. Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Co-developed-by: Niklas Cassel Signed-off-by: Niklas Cassel Link: https://lore.kernel.org/r/20230511011356.227789-18-nks@flawful.org Signed-off-by: Martin K. Petersen --- include/linux/ata.h | 3 +++ include/linux/libata.h | 1 + 2 files changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ata.h b/include/linux/ata.h index 1eda46b63dcc..21108471c6af 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -329,6 +329,7 @@ enum { /* Identify device log pages: */ ATA_LOG_SUPPORTED_CAPABILITIES = 0x03, + ATA_LOG_CURRENT_SETTINGS = 0x04, ATA_LOG_SECURITY = 0x06, ATA_LOG_SATA_SETTINGS = 0x08, ATA_LOG_ZONED_INFORMATION = 0x09, @@ -418,6 +419,8 @@ enum { SETFEATURES_SATA_ENABLE = 0x10, /* Enable use of SATA feature */ SETFEATURES_SATA_DISABLE = 0x90, /* Disable use of SATA feature */ + SETFEATURES_CDL = 0x0d, /* Enable/disable cmd duration limits */ + /* SETFEATURE Sector counts for SATA features */ SATA_FPDMA_OFFSET = 0x01, /* FPDMA non-zero buffer offsets */ SATA_FPDMA_AA = 0x02, /* FPDMA Setup FIS Auto-Activate */ diff --git a/include/linux/libata.h b/include/linux/libata.h index e8a45f7f3f5c..385ca23d5ad0 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -106,6 +106,7 @@ enum { ATA_DFLAG_INIT_MASK = (1 << 20) - 1, ATA_DFLAG_NCQ_PRIO_ENABLED = (1 << 20), /* Priority cmds sent to dev */ + ATA_DFLAG_CDL_ENABLED = (1 << 21), /* cmd duration limits is enabled */ ATA_DFLAG_DETACH = (1 << 24), ATA_DFLAG_DETACHED = (1 << 25), ATA_DFLAG_DA = (1 << 26), /* device supports Device Attention */ -- cgit v1.2.3 From eafe804bda7ba01da562c43351068b8a76a579af Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Thu, 11 May 2023 03:13:51 +0200 Subject: scsi: ata: libata: Set read/write commands CDL index For devices supporting the command duration limits feature, translate the dld field of read and write operation to set the command duration limit index field of the command task file when the duration limit feature is enabled. The function ata_set_tf_cdl() is introduced to do this. For unqueued (non NCQ) read and write operations, this function sets the command duration limit index set as the lower 3 bits of the feature field. For queued NCQ read/write commands, the index is set as the lower 3 bits of the auxiliary field. The flag ATA_QCFLAG_HAS_CDL is introduced to indicate that a command taskfile has a non zero cdl field. Signed-off-by: Damien Le Moal Reviewed-by: Igor Pylypiv Reviewed-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Co-developed-by: Niklas Cassel Signed-off-by: Niklas Cassel Link: https://lore.kernel.org/r/20230511011356.227789-19-nks@flawful.org Signed-off-by: Martin K. Petersen --- include/linux/libata.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index 385ca23d5ad0..f679abd2e61f 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -209,6 +209,7 @@ enum { ATA_QCFLAG_CLEAR_EXCL = (1 << 5), /* clear excl_link on completion */ ATA_QCFLAG_QUIET = (1 << 6), /* don't report device error */ ATA_QCFLAG_RETRY = (1 << 7), /* retry after failure */ + ATA_QCFLAG_HAS_CDL = (1 << 8), /* qc has CDL a descriptor set */ ATA_QCFLAG_EH = (1 << 16), /* cmd aborted and owned by EH */ ATA_QCFLAG_SENSE_VALID = (1 << 17), /* sense data valid */ -- cgit v1.2.3 From 18bd7718b5c489b3161b6c2ab4685d57c1e2da3b Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Thu, 11 May 2023 03:13:52 +0200 Subject: scsi: ata: libata: Handle completion of CDL commands using policy 0xD A CDL timeout for policy 0xF is defined as a NCQ error, just with a CDL specific sk/asc/ascq in the sense data. Therefore, the existing code in libata does not need to be modified to handle a policy 0xF CDL timeout. For Command Duration Limits policy 0xD: The device shall complete the command without error with the additional sense code set to DATA CURRENTLY UNAVAILABLE. Since a CDL timeout for policy 0xD is not an error, we cannot use the NCQ Command Error log (10h). Instead, we need to read the Sense Data for Successful NCQ Commands log (0Fh). In the success case, just like in the error case, we cannot simply read a log page from the interrupt handler itself, since reading a log page involves sending a READ LOG DMA EXT or READ LOG EXT command. Therefore, we add a new EH action ATA_EH_GET_SUCCESS_SENSE. When a command completes without error, and when the ATA_SENSE bit is set, this new action is set as pending, and EH is scheduled. This way, similar to the NCQ error case, the log page will be read from EH context. An alternative would have been to add a new kthread or workqueue to handle this. However, extending EH can be done with minimal changes and avoids the need to synchronize a new kthread/workqueue with EH. Co-developed-by: Damien Le Moal Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Signed-off-by: Niklas Cassel Link: https://lore.kernel.org/r/20230511011356.227789-20-nks@flawful.org Signed-off-by: Martin K. Petersen --- include/linux/ata.h | 3 +++ include/linux/libata.h | 11 ++++++++++- 2 files changed, 13 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ata.h b/include/linux/ata.h index 21108471c6af..792e10a09787 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -325,6 +325,8 @@ enum { ATA_LOG_CDL = 0x18, ATA_LOG_CDL_SIZE = ATA_SECT_SIZE, ATA_LOG_IDENTIFY_DEVICE = 0x30, + ATA_LOG_SENSE_NCQ = 0x0F, + ATA_LOG_SENSE_NCQ_SIZE = ATA_SECT_SIZE * 2, ATA_LOG_CONCURRENT_POSITIONING_RANGES = 0x47, /* Identify device log pages: */ @@ -431,6 +433,7 @@ enum { SATA_DEVSLP = 0x09, /* Device Sleep */ SETFEATURE_SENSE_DATA = 0xC3, /* Sense Data Reporting feature */ + SETFEATURE_SENSE_DATA_SUCC_NCQ = 0xC4, /* Sense Data for successful NCQ commands */ /* feature values for SET_MAX */ ATA_SET_MAX_ADDR = 0x00, diff --git a/include/linux/libata.h b/include/linux/libata.h index f679abd2e61f..5c8ef33b0af2 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -214,6 +214,7 @@ enum { ATA_QCFLAG_EH = (1 << 16), /* cmd aborted and owned by EH */ ATA_QCFLAG_SENSE_VALID = (1 << 17), /* sense data valid */ ATA_QCFLAG_EH_SCHEDULED = (1 << 18), /* EH scheduled (obsolete) */ + ATA_QCFLAG_EH_SUCCESS_CMD = (1 << 19), /* EH should fetch sense for this successful cmd */ /* host set flags */ ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host only */ @@ -312,8 +313,10 @@ enum { ATA_EH_RESET = ATA_EH_SOFTRESET | ATA_EH_HARDRESET, ATA_EH_ENABLE_LINK = (1 << 3), ATA_EH_PARK = (1 << 5), /* unload heads and stop I/O */ + ATA_EH_GET_SUCCESS_SENSE = (1 << 6), /* Get sense data for successful cmd */ - ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE | ATA_EH_PARK, + ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE | ATA_EH_PARK | + ATA_EH_GET_SUCCESS_SENSE, ATA_EH_ALL_ACTIONS = ATA_EH_REVALIDATE | ATA_EH_RESET | ATA_EH_ENABLE_LINK, @@ -867,6 +870,7 @@ struct ata_port { struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */ #endif /* owned by EH */ + u8 *ncq_sense_buf; u8 sector_buf[ATA_SECT_SIZE] ____cacheline_aligned; }; @@ -1185,6 +1189,7 @@ extern int sata_link_hardreset(struct ata_link *link, bool *online, int (*check_ready)(struct ata_link *)); extern int sata_link_resume(struct ata_link *link, const unsigned long *params, unsigned long deadline); +extern int ata_eh_read_sense_success_ncq_log(struct ata_link *link); extern void ata_eh_analyze_ncq_error(struct ata_link *link); #else static inline const unsigned long * @@ -1222,6 +1227,10 @@ static inline int sata_link_resume(struct ata_link *link, { return -EOPNOTSUPP; } +static inline int ata_eh_read_sense_success_ncq_log(struct ata_link *link) +{ + return -EOPNOTSUPP; +} static inline void ata_eh_analyze_ncq_error(struct ata_link *link) { } #endif extern int sata_link_debounce(struct ata_link *link, -- cgit v1.2.3