From f21e0e81d81b649ad309cedc7226f1bed72982e0 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 24 May 2011 08:12:40 +0800 Subject: regulator: Do bulk enables of regulators in parallel In order to reduce the impact of ramp times rather than enabling the regulators for a device in series use async tasks to run the actual enables. This means that the delays which the enables implement can all run in parallel, though it does mean that the order in which the supplies come on may be unstable. For super bonus fun points if any of the regulators are shared between multiple supplies on the same device (as is rather likely) then this will test our locking. Note that in this case we only delay once for each physical regulator so the threads shouldn't block each other while delaying. It'd be even nicer if we could coalesce writes to a shared enable registers in PMICs but that's definitely future work, and it may also be useful and is certainly more achievable to optimise out the parallelism if none of the regulators implement ramp delays. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/consumer.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 9e87c1cb7270..26f6ea4444e3 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -122,6 +122,9 @@ struct regulator; struct regulator_bulk_data { const char *supply; struct regulator *consumer; + + /* Internal use */ + int ret; }; #if defined(CONFIG_REGULATOR) -- cgit v1.2.3 From 6e6938b6d3130305a5960c86b1a9b21e58cf6144 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Sun, 6 Jun 2010 10:38:15 -0600 Subject: writeback: introduce .tagged_writepages for the WB_SYNC_NONE sync stage sync(2) is performed in two stages: the WB_SYNC_NONE sync and the WB_SYNC_ALL sync. Identify the first stage with .tagged_writepages and do livelock prevention for it, too. Jan's commit f446daaea9 ("mm: implement writeback livelock avoidance using page tagging") is a partial fix in that it only fixed the WB_SYNC_ALL phase livelock. Although ext4 is tested to no longer livelock with commit f446daaea9, it may due to some "redirty_tail() after pages_skipped" effect which is by no means a guarantee for _all_ the file systems. Note that writeback_inodes_sb() is called by not only sync(), they are treated the same because the other callers also need livelock prevention. Impact: It changes the order in which pages/inodes are synced to disk. Now in the WB_SYNC_NONE stage, it won't proceed to write the next inode until finished with the current inode. Acked-by: Jan Kara CC: Dave Chinner Signed-off-by: Wu Fengguang --- include/linux/writeback.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/writeback.h b/include/linux/writeback.h index 17e7ccc322a5..3f6542ca6198 100644 --- a/include/linux/writeback.h +++ b/include/linux/writeback.h @@ -47,6 +47,7 @@ struct writeback_control { unsigned encountered_congestion:1; /* An output: a queue is full */ unsigned for_kupdate:1; /* A kupdate writeback */ unsigned for_background:1; /* A background writeback */ + unsigned tagged_writepages:1; /* tag-and-write to avoid livelock */ unsigned for_reclaim:1; /* Invoked from the page allocator */ unsigned range_cyclic:1; /* range_start is cyclic */ unsigned more_io:1; /* more io to be dispatched */ -- cgit v1.2.3 From cb9bd1159c5fe8995e151fa7df10fa19f8c119cc Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Wed, 21 Jul 2010 22:50:57 -0600 Subject: writeback: introduce writeback_control.inodes_written The flusher works on dirty inodes in batches, and may quit prematurely if the batch of inodes happen to be metadata-only dirtied: in this case wbc->nr_to_write won't be decreased at all, which stands for "no pages written" but also mis-interpreted as "no progress". So introduce writeback_control.inodes_written to count the inodes get cleaned from VFS POV. A non-zero value means there are some progress on writeback, in which case more writeback can be tried. Acked-by: Jan Kara Acked-by: Mel Gorman Signed-off-by: Wu Fengguang --- include/linux/writeback.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/writeback.h b/include/linux/writeback.h index 3f6542ca6198..7df9026f7129 100644 --- a/include/linux/writeback.h +++ b/include/linux/writeback.h @@ -34,6 +34,7 @@ struct writeback_control { long nr_to_write; /* Write this many pages, and decrement this for each page written */ long pages_skipped; /* Pages which were not written */ + long inodes_written; /* # of inodes written (at least) */ /* * For a_ops->writepages(): is start or end are non-zero then this is -- cgit v1.2.3 From f758eeabeb96f878c860e8f110f94ec8820822a9 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 21 Apr 2011 18:19:44 -0600 Subject: writeback: split inode_wb_list_lock into bdi_writeback.list_lock Split the global inode_wb_list_lock into a per-bdi_writeback list_lock, as it's currently the most contended lock in the system for metadata heavy workloads. It won't help for single-filesystem workloads for which we'll need the I/O-less balance_dirty_pages, but at least we can dedicate a cpu to spinning on each bdi now for larger systems. Based on earlier patches from Nick Piggin and Dave Chinner. It reduces lock contentions to 1/4 in this test case: 10 HDD JBOD, 100 dd on each disk, XFS, 6GB ram lock_stat version 0.3 ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- class name con-bounces contentions waittime-min waittime-max waittime-total acq-bounces acquisitions holdtime-min holdtime-max holdtime-total ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- vanilla 2.6.39-rc3: inode_wb_list_lock: 42590 44433 0.12 147.74 144127.35 252274 886792 0.08 121.34 917211.23 ------------------ inode_wb_list_lock 2 [] bdev_inode_switch_bdi+0x29/0x85 inode_wb_list_lock 34 [] inode_wb_list_del+0x22/0x49 inode_wb_list_lock 12893 [] __mark_inode_dirty+0x170/0x1d0 inode_wb_list_lock 10702 [] writeback_single_inode+0x16d/0x20a ------------------ inode_wb_list_lock 2 [] bdev_inode_switch_bdi+0x29/0x85 inode_wb_list_lock 19 [] inode_wb_list_del+0x22/0x49 inode_wb_list_lock 5550 [] __mark_inode_dirty+0x170/0x1d0 inode_wb_list_lock 8511 [] writeback_sb_inodes+0x10f/0x157 2.6.39-rc3 + patch: &(&wb->list_lock)->rlock: 11383 11657 0.14 151.69 40429.51 90825 527918 0.11 145.90 556843.37 ------------------------ &(&wb->list_lock)->rlock 10 [] inode_wb_list_del+0x5f/0x86 &(&wb->list_lock)->rlock 1493 [] writeback_inodes_wb+0x3d/0x150 &(&wb->list_lock)->rlock 3652 [] writeback_sb_inodes+0x123/0x16f &(&wb->list_lock)->rlock 1412 [] writeback_single_inode+0x17f/0x223 ------------------------ &(&wb->list_lock)->rlock 3 [] bdi_lock_two+0x46/0x4b &(&wb->list_lock)->rlock 6 [] inode_wb_list_del+0x5f/0x86 &(&wb->list_lock)->rlock 2061 [] __mark_inode_dirty+0x173/0x1cf &(&wb->list_lock)->rlock 2629 [] writeback_sb_inodes+0x123/0x16f hughd@google.com: fix recursive lock when bdi_lock_two() is called with new the same as old akpm@linux-foundation.org: cleanup bdev_inode_switch_bdi() comment Signed-off-by: Christoph Hellwig Signed-off-by: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Wu Fengguang --- include/linux/backing-dev.h | 2 ++ include/linux/writeback.h | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h index 96f4094b706d..47feb2c4706a 100644 --- a/include/linux/backing-dev.h +++ b/include/linux/backing-dev.h @@ -57,6 +57,7 @@ struct bdi_writeback { struct list_head b_dirty; /* dirty inodes */ struct list_head b_io; /* parked for writeback */ struct list_head b_more_io; /* parked for more writeback */ + spinlock_t list_lock; /* protects the b_* lists */ }; struct backing_dev_info { @@ -106,6 +107,7 @@ int bdi_writeback_thread(void *data); int bdi_has_dirty_io(struct backing_dev_info *bdi); void bdi_arm_supers_timer(void); void bdi_wakeup_thread_delayed(struct backing_dev_info *bdi); +void bdi_lock_two(struct bdi_writeback *wb1, struct bdi_writeback *wb2); extern spinlock_t bdi_lock; extern struct list_head bdi_list; diff --git a/include/linux/writeback.h b/include/linux/writeback.h index 7df9026f7129..c2d957fb38d3 100644 --- a/include/linux/writeback.h +++ b/include/linux/writeback.h @@ -9,8 +9,6 @@ struct backing_dev_info; -extern spinlock_t inode_wb_list_lock; - /* * fs/fs-writeback.c */ -- cgit v1.2.3 From e185dda89d69cde142b48059413a03561f41f78a Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Sat, 23 Apr 2011 11:26:07 -0600 Subject: writeback: avoid extra sync work at enqueue time This removes writeback_control.wb_start and does more straightforward sync livelock prevention by setting .older_than_this to prevent extra inodes from being enqueued in the first place. Acked-by: Jan Kara Signed-off-by: Wu Fengguang --- include/linux/writeback.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/writeback.h b/include/linux/writeback.h index c2d957fb38d3..d8e96a480850 100644 --- a/include/linux/writeback.h +++ b/include/linux/writeback.h @@ -26,9 +26,6 @@ struct writeback_control { enum writeback_sync_modes sync_mode; unsigned long *older_than_this; /* If !NULL, only write back inodes older than this */ - unsigned long wb_start; /* Time writeback_inodes_wb was - called. This is needed to avoid - extra jobs and livelock */ long nr_to_write; /* Write this many pages, and decrement this for each page written */ long pages_skipped; /* Pages which were not written */ -- cgit v1.2.3 From b7a2441f9966fe3e1be960a876ab52e6029ea005 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Wed, 21 Jul 2010 22:19:51 -0600 Subject: writeback: remove writeback_control.more_io When wbc.more_io was first introduced, it indicates whether there are at least one superblock whose s_more_io contains more IO work. Now with the per-bdi writeback, it can be replaced with a simple b_more_io test. Acked-by: Jan Kara Acked-by: Mel Gorman Reviewed-by: Minchan Kim Signed-off-by: Wu Fengguang --- include/linux/writeback.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/writeback.h b/include/linux/writeback.h index d8e96a480850..8797b20dd22b 100644 --- a/include/linux/writeback.h +++ b/include/linux/writeback.h @@ -46,7 +46,6 @@ struct writeback_control { unsigned tagged_writepages:1; /* tag-and-write to avoid livelock */ unsigned for_reclaim:1; /* Invoked from the page allocator */ unsigned range_cyclic:1; /* range_start is cyclic */ - unsigned more_io:1; /* more io to be dispatched */ }; /* -- cgit v1.2.3 From 846d5a091b0506b75489577cde27f39b37a192a4 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Thu, 5 May 2011 21:10:38 -0600 Subject: writeback: remove .nonblocking and .encountered_congestion Remove two unused struct writeback_control fields: .encountered_congestion (completely unused) .nonblocking (never set, checked/showed in XFS,NFS/btrfs) The .for_background check in nfs_write_inode() is also removed btw, as .for_background implies WB_SYNC_NONE. Reviewed-by: Jan Kara Proposed-by: Christoph Hellwig Signed-off-by: Wu Fengguang --- include/linux/writeback.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/writeback.h b/include/linux/writeback.h index 8797b20dd22b..2f1b512bd6e0 100644 --- a/include/linux/writeback.h +++ b/include/linux/writeback.h @@ -39,8 +39,6 @@ struct writeback_control { loff_t range_start; loff_t range_end; - unsigned nonblocking:1; /* Don't get stuck on request queues */ - unsigned encountered_congestion:1; /* An output: a queue is full */ unsigned for_kupdate:1; /* A kupdate writeback */ unsigned for_background:1; /* A background writeback */ unsigned tagged_writepages:1; /* tag-and-write to avoid livelock */ -- cgit v1.2.3 From debf9507166eede1e676d27d3298cdfb27399cb4 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 8 Jun 2011 18:19:37 +0900 Subject: serial: sh-sci: Generalize overrun handling. This consolidates all of the broken out overrun handling and ensures that we have sensible defaults per-port type, in addition to making sure that overruns are flagged appropriately in the error mask for parts that haven't explicitly disabled support for it. Signed-off-by: Paul Mundt --- include/linux/serial_sci.h | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'include/linux') diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index a2afc9fbe186..5fac3bccfd87 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -8,6 +8,8 @@ * Generic header for SuperH SCI(F) (used by sh/sh64/h8300 and related parts) */ +#define SCIx_NOT_SUPPORTED (-1) + enum { SCBRR_ALGO_1, /* ((clk + 16 * bps) / (16 * bps) - 1) */ SCBRR_ALGO_2, /* ((clk + 16 * bps) / (32 * bps) - 1) */ @@ -25,6 +27,28 @@ enum { #define SCSCR_CKE1 (1 << 1) #define SCSCR_CKE0 (1 << 0) +/* SCxSR SCI */ +#define SCI_TDRE 0x80 +#define SCI_RDRF 0x40 +#define SCI_ORER 0x20 +#define SCI_FER 0x10 +#define SCI_PER 0x08 +#define SCI_TEND 0x04 + +#define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER) + +/* SCxSR SCIF */ +#define SCIF_ER 0x0080 +#define SCIF_TEND 0x0040 +#define SCIF_TDFE 0x0020 +#define SCIF_BRK 0x0010 +#define SCIF_FER 0x0008 +#define SCIF_PER 0x0004 +#define SCIF_RDF 0x0002 +#define SCIF_DR 0x0001 + +#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) + /* Offsets into the sci_port->irqs array */ enum { SCIx_ERI_IRQ, @@ -56,6 +80,12 @@ struct plat_sci_port { unsigned int scbrr_algo_id; /* SCBRR calculation algo */ unsigned int scscr; /* SCSCR initialization */ + /* + * Platform overrides if necessary, defaults otherwise. + */ + int overrun_bit; + unsigned int error_mask; + struct device *dma_dev; unsigned int dma_slave_tx; -- cgit v1.2.3 From 514820eb982eb85677ed2ecef9710e90e24fbdab Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 8 Jun 2011 18:51:32 +0900 Subject: serial: sh-sci: Consolidate RXD pin handling. Non-SCI parts do not have the special port reg necessary for cases where the RX and SCI pins are muxed and need to be manually polled, so these like always fall back on the normal FIFO processing paths. SH7760 is in a class in and of itself with regards to mapping its SIM card interface via the SCI port class despite not having any of the RXD lines wired up and so implicitly behaving more like a SCIF in this regard. Out of the other CPUs, some support the port check via the same block while others do it through an external SuperI/O, so it's not even possible to perform the check relative to the ioremapped cookie offset, so the separate read semantics are preserved here, too. Signed-off-by: Paul Mundt --- include/linux/serial_sci.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index 5fac3bccfd87..ecefec7c0b67 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -86,6 +86,8 @@ struct plat_sci_port { int overrun_bit; unsigned int error_mask; + int port_reg; + struct device *dma_dev; unsigned int dma_slave_tx; -- cgit v1.2.3 From 3801b86aa482d26a8ae460f67fca29e016491a86 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 9 Jun 2011 16:22:22 +0100 Subject: regulator: Refactor supply implementation to work as regular consumers Currently the regulator supply implementation is somewhat complex and fragile as it doesn't look like standard consumers but is instead a parallel implementation. This causes issues with locking and reference counting. Move the implementation over to using standard consumers to address this. Rather than only notifying the supply on the first enable/disable we do so every time the regulator is enabled or disabled, simplifying locking as we don't need to hold a lock on the consumer we are about to enable. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/driver.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 6c433b89c80d..1a80bc77517d 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -188,18 +188,16 @@ struct regulator_dev { /* lists we belong to */ struct list_head list; /* list of all regulators */ - struct list_head slist; /* list of supplied regulators */ /* lists we own */ struct list_head consumer_list; /* consumers we supply */ - struct list_head supply_list; /* regulators we supply */ struct blocking_notifier_head notifier; struct mutex mutex; /* consumer lock */ struct module *owner; struct device dev; struct regulation_constraints *constraints; - struct regulator_dev *supply; /* for tree */ + struct regulator *supply; /* for tree */ void *reg_data; /* regulator_dev data */ -- cgit v1.2.3 From 61a6976bf19a6cf5dfcf37c3536665b316f22d49 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 14 Jun 2011 12:40:19 +0900 Subject: serial: sh-sci: Abstract register maps. This takes a bit of a sledgehammer to the horribly CPU subtype ifdef-ridden header and abstracts all of the different register layouts in to distinct types which in turn can be overriden on a per-port basis, or permitted to default to the map matching the port type at probe time. In the process this ultimately fixes up inumerable bugs with mismatches on various CPU types (particularly the legacy ones that were obviously broken years ago and no one noticed) and provides a more tightly coupled and consolidated platform for extending and implementing generic features. Signed-off-by: Paul Mundt --- include/linux/serial_sci.h | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'include/linux') diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index ecefec7c0b67..4ca130a90ea5 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -58,6 +58,22 @@ enum { SCIx_NR_IRQS, }; +enum { + SCIx_PROBE_REGTYPE, + + SCIx_SCI_REGTYPE, + SCIx_IRDA_REGTYPE, + SCIx_SCIFA_REGTYPE, + SCIx_SCIFB_REGTYPE, + SCIx_SH3_SCIF_REGTYPE, + SCIx_SH4_SCIF_REGTYPE, + SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, + SCIx_SH4_SCIF_FIFODATA_REGTYPE, + SCIx_SH7705_SCIF_REGTYPE, + + SCIx_NR_REGTYPES, +}; + #define SCIx_IRQ_MUXED(irq) \ { \ [SCIx_ERI_IRQ] = (irq), \ @@ -66,8 +82,24 @@ enum { [SCIx_BRI_IRQ] = (irq), \ } +/* + * SCI register subset common for all port types. + * Not all registers will exist on all parts. + */ +enum { + SCSMR, SCBRR, SCSCR, SCxSR, + SCFCR, SCFDR, SCxTDR, SCxRDR, + SCLSR, SCTFDR, SCRFDR, SCSPTR, + + SCIx_NR_REGS, +}; + struct device; +struct plat_sci_port_ops { + void (*init_pins)(struct uart_port *, unsigned int cflag); +}; + /* * Platform device specific platform_data struct */ @@ -87,6 +119,10 @@ struct plat_sci_port { unsigned int error_mask; int port_reg; + unsigned char regshift; + unsigned char regtype; + + struct plat_sci_port_ops *ops; struct device *dma_dev; -- cgit v1.2.3 From 5899a723b336da241b492583d7e55f1055f8f3b3 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 17 Jun 2011 08:20:40 +0000 Subject: dmaengine: shdma: add chcr_write/read function CHCR register position is not same in all DMAC. This patch adds new "chcr_offset" to decide it. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- include/linux/sh_dma.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/sh_dma.h b/include/linux/sh_dma.h index b08cd4efa15c..41fe4c2d6481 100644 --- a/include/linux/sh_dma.h +++ b/include/linux/sh_dma.h @@ -62,6 +62,7 @@ struct sh_dmae_pdata { const unsigned int *ts_shift; int ts_shift_num; u16 dmaor_init; + unsigned int chcr_offset; }; /* DMA register */ -- cgit v1.2.3 From 67c6269e5c998b53c2c08ce2befbbe20a7b6f57f Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 17 Jun 2011 08:20:51 +0000 Subject: dmaengine: shdma: add chcr_ie_bit IE bit position on CHCR register is not same in all DMAC. This patch adds new "chcr_ie_bit" to decide it. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- include/linux/sh_dma.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/sh_dma.h b/include/linux/sh_dma.h index 41fe4c2d6481..96803aa7b6bd 100644 --- a/include/linux/sh_dma.h +++ b/include/linux/sh_dma.h @@ -63,6 +63,7 @@ struct sh_dmae_pdata { int ts_shift_num; u16 dmaor_init; unsigned int chcr_offset; + u32 chcr_ie_bit; }; /* DMA register */ -- cgit v1.2.3 From e76c3af873025f5a704d56a28882be761e15657b Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 17 Jun 2011 08:20:56 +0000 Subject: dmaengine: shdma: add dmaor_is_32bit flag Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- include/linux/sh_dma.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sh_dma.h b/include/linux/sh_dma.h index 96803aa7b6bd..f25afc61e1c6 100644 --- a/include/linux/sh_dma.h +++ b/include/linux/sh_dma.h @@ -64,6 +64,8 @@ struct sh_dmae_pdata { u16 dmaor_init; unsigned int chcr_offset; u32 chcr_ie_bit; + + unsigned int dmaor_is_32bit:1; }; /* DMA register */ -- cgit v1.2.3 From 260bf2c5f69f419b04b6861ca91565b5fb16ce48 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 17 Jun 2011 08:21:05 +0000 Subject: dmaengine: shdma: add .needs_tend_set / .no_dmars flags Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- include/linux/sh_dma.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sh_dma.h b/include/linux/sh_dma.h index f25afc61e1c6..cb2dd118cc0f 100644 --- a/include/linux/sh_dma.h +++ b/include/linux/sh_dma.h @@ -66,6 +66,8 @@ struct sh_dmae_pdata { u32 chcr_ie_bit; unsigned int dmaor_is_32bit:1; + unsigned int needs_tend_set:1; + unsigned int no_dmars:1; }; /* DMA register */ @@ -75,6 +77,8 @@ struct sh_dmae_pdata { #define CHCR 0x0C #define DMAOR 0x40 +#define TEND 0x18 /* USB-DMAC */ + /* DMAOR definitions */ #define DMAOR_AE 0x00000004 #define DMAOR_NMIF 0x00000002 -- cgit v1.2.3 From 40680f2fa4670ab35ee554822a69dda1a118f966 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 24 May 2011 22:24:47 +0200 Subject: ext3: Convert ext3 to new truncate calling convention Mostly trivial conversion. We fix a bug that IS_IMMUTABLE and IS_APPEND files could not be truncated during failed writes as we change the code. In fact the test is not needed at all because both IS_IMMUTABLE and IS_APPEND is tested in upper layers in do_sys_[f]truncate(), may_write(), etc. Signed-off-by: Jan Kara --- include/linux/ext3_fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ext3_fs.h b/include/linux/ext3_fs.h index 5e06acf95d0f..9aaa3a84d373 100644 --- a/include/linux/ext3_fs.h +++ b/include/linux/ext3_fs.h @@ -913,7 +913,7 @@ extern void ext3_dirty_inode(struct inode *, int); extern int ext3_change_inode_journal_flag(struct inode *, int); extern int ext3_get_inode_loc(struct inode *, struct ext3_iloc *); extern int ext3_can_truncate(struct inode *inode); -extern void ext3_truncate (struct inode *); +extern void ext3_truncate(struct inode *inode); extern void ext3_set_inode_flags(struct inode *); extern void ext3_get_inode_flags(struct ext3_inode_info *); extern void ext3_set_aops(struct inode *inode); -- cgit v1.2.3 From fbcc9e624b8dbc7f740fac3906aa261b83398100 Mon Sep 17 00:00:00 2001 From: Petr Uzel Date: Tue, 31 May 2011 11:36:06 +0200 Subject: ext2: include fs.h into ext2_fs.h AC_CHECK_HEADERS([linux/ext2_fs.h]) fails with configure:34666: checking linux/ext2_fs.h usability configure:34666: gcc -std=gnu99 -c -ggdb3 -O0 -Wunreachable-code conftest.c >&5 In file included from conftest.c:406:0: /usr/include/linux/ext2_fs.h: In function 'ext2_mask_flags': /usr/include/linux/ext2_fs.h:182:21: error: 'FS_DIRSYNC_FL' undeclared (first use in this function) /usr/include/linux/ext2_fs.h:182:21: note: each undeclared identifier is reported only once for each function it appears in /usr/include/linux/ext2_fs.h:182:37: error: 'FS_TOPDIR_FL' undeclared (first use in this function) /usr/include/linux/ext2_fs.h:184:19: error: 'FS_NODUMP_FL' undeclared (first use in this function) /usr/include/linux/ext2_fs.h:184:34: error: 'FS_NOATIME_FL' undeclared (first use in this function) It's reasonable to have headers that include all necessary definitions. So fix this by including fs.h into ext2_fs.h. Signed-off-by: Petr Uzel Signed-off-by: Jan Kara --- include/linux/ext2_fs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/ext2_fs.h b/include/linux/ext2_fs.h index 2dfa7076e8b6..53792bf36c71 100644 --- a/include/linux/ext2_fs.h +++ b/include/linux/ext2_fs.h @@ -18,6 +18,7 @@ #include #include +#include /* * The second extended filesystem constants/structures -- cgit v1.2.3 From 9008593017069ad513cc7dc78a6c94e8dfddba31 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Wed, 1 Jun 2011 23:34:04 +0900 Subject: ext3: use proper little-endian bitops ext3_{set,clear}_bit() is defined as __test_and_{set,clear}_bit_le() for ext3. But all ext3_{set,clear}_bit() calls ignore return values. So these can be replaced with __{set,clear}_bit_le(). This changes ext3_{set,clear}_bit safely, because if someone uses these macros without noticing the change, new ext3_{set,clear}_bit don't have return value and causes compiler errors where the return value is used. This also removes unused ext3_find_first_zero_bit(). Signed-off-by: Akinobu Mita Cc: Jan Kara Cc: Andrew Morton Cc: Andreas Dilger Cc: linux-ext4@vger.kernel.org Signed-off-by: Jan Kara --- include/linux/ext3_fs.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ext3_fs.h b/include/linux/ext3_fs.h index 9aaa3a84d373..8f1f908eddb8 100644 --- a/include/linux/ext3_fs.h +++ b/include/linux/ext3_fs.h @@ -418,12 +418,11 @@ struct ext3_inode { #define EXT2_MOUNT_DATA_FLAGS EXT3_MOUNT_DATA_FLAGS #endif -#define ext3_set_bit __test_and_set_bit_le +#define ext3_set_bit __set_bit_le #define ext3_set_bit_atomic ext2_set_bit_atomic -#define ext3_clear_bit __test_and_clear_bit_le +#define ext3_clear_bit __clear_bit_le #define ext3_clear_bit_atomic ext2_clear_bit_atomic #define ext3_test_bit test_bit_le -#define ext3_find_first_zero_bit find_first_zero_bit_le #define ext3_find_next_zero_bit find_next_zero_bit_le /* -- cgit v1.2.3 From bb189247f35688a3353545902c56290fb7d7754a Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Fri, 24 Jun 2011 23:11:59 +0200 Subject: jbd: Fix oops in journal_remove_journal_head() journal_remove_journal_head() can oops when trying to access journal_head returned by bh2jh(). This is caused for example by the following race: TASK1 TASK2 journal_commit_transaction() ... processing t_forget list __journal_refile_buffer(jh); if (!jh->b_transaction) { jbd_unlock_bh_state(bh); journal_try_to_free_buffers() journal_grab_journal_head(bh) jbd_lock_bh_state(bh) __journal_try_to_free_buffer() journal_put_journal_head(jh) journal_remove_journal_head(bh); journal_put_journal_head() in TASK2 sees that b_jcount == 0 and buffer is not part of any transaction and thus frees journal_head before TASK1 gets to doing so. Note that even buffer_head can be released by try_to_free_buffers() after journal_put_journal_head() which adds even larger opportunity for oops (but I didn't see this happen in reality). Fix the problem by making transactions hold their own journal_head reference (in b_jcount). That way we don't have to remove journal_head explicitely via journal_remove_journal_head() and instead just remove journal_head when b_jcount drops to zero. The result of this is that [__]journal_refile_buffer(), [__]journal_unfile_buffer(), and __journal_remove_checkpoint() can free journal_head which needs modification of a few callers. Also we have to be careful because once journal_head is removed, buffer_head might be freed as well. So we have to get our own buffer_head reference where it matters. Signed-off-by: Jan Kara --- include/linux/jbd.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/jbd.h b/include/linux/jbd.h index e06965081ba5..e6a5e34bed4f 100644 --- a/include/linux/jbd.h +++ b/include/linux/jbd.h @@ -940,7 +940,6 @@ extern int journal_force_commit(journal_t *); */ struct journal_head *journal_add_journal_head(struct buffer_head *bh); struct journal_head *journal_grab_journal_head(struct buffer_head *bh); -void journal_remove_journal_head(struct buffer_head *bh); void journal_put_journal_head(struct journal_head *jh); /* -- cgit v1.2.3 From f8f8527103a264b5e4ab2ce5c1743b28f3219d90 Mon Sep 17 00:00:00 2001 From: Roberto Sassu Date: Mon, 27 Jun 2011 13:45:43 +0200 Subject: eCryptfs: export global eCryptfs definitions to include/linux/ecryptfs.h Some eCryptfs specific definitions, such as the current version and the authentication token structure, are moved to the new include file 'include/linux/ecryptfs.h', in order to be available for all kernel subsystems. Signed-off-by: Roberto Sassu Acked-by: Gianluca Ramunno Acked-by: Tyler Hicks Acked-by: David Howells Signed-off-by: Mimi Zohar --- include/linux/ecryptfs.h | 113 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 113 insertions(+) create mode 100644 include/linux/ecryptfs.h (limited to 'include/linux') diff --git a/include/linux/ecryptfs.h b/include/linux/ecryptfs.h new file mode 100644 index 000000000000..2224a8c0cb64 --- /dev/null +++ b/include/linux/ecryptfs.h @@ -0,0 +1,113 @@ +#ifndef _LINUX_ECRYPTFS_H +#define _LINUX_ECRYPTFS_H + +/* Version verification for shared data structures w/ userspace */ +#define ECRYPTFS_VERSION_MAJOR 0x00 +#define ECRYPTFS_VERSION_MINOR 0x04 +#define ECRYPTFS_SUPPORTED_FILE_VERSION 0x03 +/* These flags indicate which features are supported by the kernel + * module; userspace tools such as the mount helper read + * ECRYPTFS_VERSIONING_MASK from a sysfs handle in order to determine + * how to behave. */ +#define ECRYPTFS_VERSIONING_PASSPHRASE 0x00000001 +#define ECRYPTFS_VERSIONING_PUBKEY 0x00000002 +#define ECRYPTFS_VERSIONING_PLAINTEXT_PASSTHROUGH 0x00000004 +#define ECRYPTFS_VERSIONING_POLICY 0x00000008 +#define ECRYPTFS_VERSIONING_XATTR 0x00000010 +#define ECRYPTFS_VERSIONING_MULTKEY 0x00000020 +#define ECRYPTFS_VERSIONING_DEVMISC 0x00000040 +#define ECRYPTFS_VERSIONING_HMAC 0x00000080 +#define ECRYPTFS_VERSIONING_FILENAME_ENCRYPTION 0x00000100 +#define ECRYPTFS_VERSIONING_GCM 0x00000200 +#define ECRYPTFS_VERSIONING_MASK (ECRYPTFS_VERSIONING_PASSPHRASE \ + | ECRYPTFS_VERSIONING_PLAINTEXT_PASSTHROUGH \ + | ECRYPTFS_VERSIONING_PUBKEY \ + | ECRYPTFS_VERSIONING_XATTR \ + | ECRYPTFS_VERSIONING_MULTKEY \ + | ECRYPTFS_VERSIONING_DEVMISC \ + | ECRYPTFS_VERSIONING_FILENAME_ENCRYPTION) +#define ECRYPTFS_MAX_PASSWORD_LENGTH 64 +#define ECRYPTFS_MAX_PASSPHRASE_BYTES ECRYPTFS_MAX_PASSWORD_LENGTH +#define ECRYPTFS_SALT_SIZE 8 +#define ECRYPTFS_SALT_SIZE_HEX (ECRYPTFS_SALT_SIZE*2) +/* The original signature size is only for what is stored on disk; all + * in-memory representations are expanded hex, so it better adapted to + * be passed around or referenced on the command line */ +#define ECRYPTFS_SIG_SIZE 8 +#define ECRYPTFS_SIG_SIZE_HEX (ECRYPTFS_SIG_SIZE*2) +#define ECRYPTFS_PASSWORD_SIG_SIZE ECRYPTFS_SIG_SIZE_HEX +#define ECRYPTFS_MAX_KEY_BYTES 64 +#define ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES 512 +#define ECRYPTFS_FILE_VERSION 0x03 +#define ECRYPTFS_MAX_PKI_NAME_BYTES 16 + +#define RFC2440_CIPHER_DES3_EDE 0x02 +#define RFC2440_CIPHER_CAST_5 0x03 +#define RFC2440_CIPHER_BLOWFISH 0x04 +#define RFC2440_CIPHER_AES_128 0x07 +#define RFC2440_CIPHER_AES_192 0x08 +#define RFC2440_CIPHER_AES_256 0x09 +#define RFC2440_CIPHER_TWOFISH 0x0a +#define RFC2440_CIPHER_CAST_6 0x0b + +#define RFC2440_CIPHER_RSA 0x01 + +/** + * For convenience, we may need to pass around the encrypted session + * key between kernel and userspace because the authentication token + * may not be extractable. For example, the TPM may not release the + * private key, instead requiring the encrypted data and returning the + * decrypted data. + */ +struct ecryptfs_session_key { +#define ECRYPTFS_USERSPACE_SHOULD_TRY_TO_DECRYPT 0x00000001 +#define ECRYPTFS_USERSPACE_SHOULD_TRY_TO_ENCRYPT 0x00000002 +#define ECRYPTFS_CONTAINS_DECRYPTED_KEY 0x00000004 +#define ECRYPTFS_CONTAINS_ENCRYPTED_KEY 0x00000008 + u32 flags; + u32 encrypted_key_size; + u32 decrypted_key_size; + u8 encrypted_key[ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES]; + u8 decrypted_key[ECRYPTFS_MAX_KEY_BYTES]; +}; + +struct ecryptfs_password { + u32 password_bytes; + s32 hash_algo; + u32 hash_iterations; + u32 session_key_encryption_key_bytes; +#define ECRYPTFS_PERSISTENT_PASSWORD 0x01 +#define ECRYPTFS_SESSION_KEY_ENCRYPTION_KEY_SET 0x02 + u32 flags; + /* Iterated-hash concatenation of salt and passphrase */ + u8 session_key_encryption_key[ECRYPTFS_MAX_KEY_BYTES]; + u8 signature[ECRYPTFS_PASSWORD_SIG_SIZE + 1]; + /* Always in expanded hex */ + u8 salt[ECRYPTFS_SALT_SIZE]; +}; + +enum ecryptfs_token_types {ECRYPTFS_PASSWORD, ECRYPTFS_PRIVATE_KEY}; + +struct ecryptfs_private_key { + u32 key_size; + u32 data_len; + u8 signature[ECRYPTFS_PASSWORD_SIG_SIZE + 1]; + char pki_type[ECRYPTFS_MAX_PKI_NAME_BYTES + 1]; + u8 data[]; +}; + +/* May be a password or a private key */ +struct ecryptfs_auth_tok { + u16 version; /* 8-bit major and 8-bit minor */ + u16 token_type; +#define ECRYPTFS_ENCRYPT_ONLY 0x00000001 + u32 flags; + struct ecryptfs_session_key session_key; + u8 reserved[32]; + union { + struct ecryptfs_password password; + struct ecryptfs_private_key private_key; + } token; +} __attribute__ ((packed)); + +#endif /* _LINUX_ECRYPTFS_H */ -- cgit v1.2.3 From 9174fc8f111982e024a00512c521ad8f1056fccb Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 28 Jun 2011 15:25:36 +0900 Subject: serial: sh-sci: Fix up pretty name printing for port IRQs. Presently these were all using the same static string with no regard to dev_name() and the like. This implements a bit of rework to name the IRQ dynamically, as it should have been doing all along anyways. Signed-off-by: Paul Mundt --- include/linux/serial_sci.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index 4ca130a90ea5..8bffe9ae2ca0 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -56,6 +56,8 @@ enum { SCIx_TXI_IRQ, SCIx_BRI_IRQ, SCIx_NR_IRQS, + + SCIx_MUX_IRQ = SCIx_NR_IRQS, /* special case */ }; enum { @@ -82,6 +84,11 @@ enum { [SCIx_BRI_IRQ] = (irq), \ } +#define SCIx_IRQ_IS_MUXED(port) \ + ((port)->cfg->irqs[SCIx_ERI_IRQ] == \ + (port)->cfg->irqs[SCIx_RXI_IRQ]) || \ + ((port)->cfg->irqs[SCIx_ERI_IRQ] && \ + !(port)->cfg->irqs[SCIx_RXI_IRQ]) /* * SCI register subset common for all port types. * Not all registers will exist on all parts. -- cgit v1.2.3 From 3d73710880afa3d61cf57b5d4eb192e812eb7e4f Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 28 Jun 2011 10:59:12 -0700 Subject: cpufreq: expose a cpufreq_quick_get_max routine This allows drivers and other code to get the max reported CPU frequency. Initial use is for scaling ring frequency with GPU frequency in the i915 driver. Signed-off-by: Jesse Barnes Signed-off-by: Keith Packard --- include/linux/cpufreq.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 11be48e0d168..6216115c7789 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -324,11 +324,16 @@ static inline unsigned int cpufreq_get(unsigned int cpu) /* query the last known CPU freq (in kHz). If zero, cpufreq couldn't detect it */ #ifdef CONFIG_CPU_FREQ unsigned int cpufreq_quick_get(unsigned int cpu); +unsigned int cpufreq_quick_get_max(unsigned int cpu); #else static inline unsigned int cpufreq_quick_get(unsigned int cpu) { return 0; } +static inline unsigned int cpufreq_quick_get_max(unsigned int cpu) +{ + return 0; +} #endif -- cgit v1.2.3 From 50d5c41cd151b21ac1dfc98f048210456ccacc20 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Wed, 1 Jun 2011 12:25:45 -0500 Subject: slub: Do not use frozen page flag but a bit in the page counters Do not use a page flag for the frozen bit. It needs to be part of the state that is handled with cmpxchg_double(). So use a bit in the counter struct in the page struct for that purpose. Signed-off-by: Christoph Lameter Signed-off-by: Pekka Enberg --- include/linux/mm_types.h | 5 +++-- include/linux/page-flags.h | 5 ----- 2 files changed, 3 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 027935c86c68..e5fb2a70518b 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -41,8 +41,9 @@ struct page { * & limit reverse map searches. */ struct { /* SLUB */ - u16 inuse; - u16 objects; + unsigned inuse:16; + unsigned objects:15; + unsigned frozen:1; }; }; union { diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index 6081493db68f..20791f18f5cf 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -124,9 +124,6 @@ enum pageflags { /* SLOB */ PG_slob_free = PG_private, - - /* SLUB */ - PG_slub_frozen = PG_active, }; #ifndef __GENERATING_BOUNDS_H @@ -212,8 +209,6 @@ PAGEFLAG(SwapBacked, swapbacked) __CLEARPAGEFLAG(SwapBacked, swapbacked) __PAGEFLAG(SlobFree, slob_free) -__PAGEFLAG(SlubFrozen, slub_frozen) - /* * Private page markings that may be used by the filesystem that owns the page * for its own purposes. -- cgit v1.2.3 From fc9bb8c768abe7ae10861c3510e01a95f98d5933 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Wed, 1 Jun 2011 12:25:48 -0500 Subject: mm: Rearrange struct page We need to be able to use cmpxchg_double on the freelist and object count field in struct page. Rearrange the fields in struct page according to doubleword entities so that the freelist pointer comes before the counters. Do the rearranging with a future in mind where we use more doubleword atomics to avoid locking of updates to flags/mapping or lru pointers. Create another union to allow access to counters in struct page as a single unsigned long value. The doublewords must be properly aligned for cmpxchg_double to work. Sadly this increases the size of page struct by one word on some architectures. But as a resultpage structs are now cacheline aligned on x86_64. Signed-off-by: Christoph Lameter Signed-off-by: Pekka Enberg --- include/linux/mm_types.h | 87 ++++++++++++++++++++++++++++++++---------------- 1 file changed, 59 insertions(+), 28 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index e5fb2a70518b..3d76a433d52f 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -30,24 +30,60 @@ struct address_space; * moment. Note that we have no way to track which tasks are using * a page, though if it is a pagecache page, rmap structures can tell us * who is mapping it. + * + * The objects in struct page are organized in double word blocks in + * order to allows us to use atomic double word operations on portions + * of struct page. That is currently only used by slub but the arrangement + * allows the use of atomic double word operations on the flags/mapping + * and lru list pointers also. */ struct page { + /* First double word block */ unsigned long flags; /* Atomic flags, some possibly * updated asynchronously */ - atomic_t _count; /* Usage count, see below. */ + struct address_space *mapping; /* If low bit clear, points to + * inode address_space, or NULL. + * If page mapped as anonymous + * memory, low bit is set, and + * it points to anon_vma object: + * see PAGE_MAPPING_ANON below. + */ + /* Second double word */ union { - atomic_t _mapcount; /* Count of ptes mapped in mms, - * to show when page is mapped - * & limit reverse map searches. + struct { + pgoff_t index; /* Our offset within mapping. */ + atomic_t _mapcount; /* Count of ptes mapped in mms, + * to show when page is mapped + * & limit reverse map searches. + */ + atomic_t _count; /* Usage count, see below. */ + }; + + struct { /* SLUB cmpxchg_double area */ + void *freelist; + union { + unsigned long counters; + struct { + unsigned inuse:16; + unsigned objects:15; + unsigned frozen:1; + /* + * Kernel may make use of this field even when slub + * uses the rest of the double word! */ - struct { /* SLUB */ - unsigned inuse:16; - unsigned objects:15; - unsigned frozen:1; + atomic_t _count; + }; + }; }; }; + + /* Third double word block */ + struct list_head lru; /* Pageout list, eg. active_list + * protected by zone->lru_lock ! + */ + + /* Remainder is not double word aligned */ union { - struct { unsigned long private; /* Mapping-private opaque data: * usually used for buffer_heads * if PagePrivate set; used for @@ -55,27 +91,13 @@ struct page { * indicates order in the buddy * system if PG_buddy is set. */ - struct address_space *mapping; /* If low bit clear, points to - * inode address_space, or NULL. - * If page mapped as anonymous - * memory, low bit is set, and - * it points to anon_vma object: - * see PAGE_MAPPING_ANON below. - */ - }; #if USE_SPLIT_PTLOCKS - spinlock_t ptl; + spinlock_t ptl; #endif - struct kmem_cache *slab; /* SLUB: Pointer to slab */ - struct page *first_page; /* Compound tail pages */ + struct kmem_cache *slab; /* SLUB: Pointer to slab */ + struct page *first_page; /* Compound tail pages */ }; - union { - pgoff_t index; /* Our offset within mapping. */ - void *freelist; /* SLUB: freelist req. slab lock */ - }; - struct list_head lru; /* Pageout list, eg. active_list - * protected by zone->lru_lock ! - */ + /* * On machines where all RAM is mapped into kernel address space, * we can simply calculate the virtual address. On machines with @@ -101,7 +123,16 @@ struct page { */ void *shadow; #endif -}; +} +/* + * If another subsystem starts using the double word pairing for atomic + * operations on struct page then it must change the #if to ensure + * proper alignment of the page struct. + */ +#if defined(CONFIG_SLUB) && defined(CONFIG_CMPXCHG_LOCAL) + __attribute__((__aligned__(2*sizeof(unsigned long)))) +#endif +; typedef unsigned long __nocast vm_flags_t; -- cgit v1.2.3 From b789ef518b2a7231b0668c813f677cee528a9d3f Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Wed, 1 Jun 2011 12:25:49 -0500 Subject: slub: Add cmpxchg_double_slab() Add a function that operates on the second doubleword in the page struct and manipulates the object counters, the freelist and the frozen attribute. Signed-off-by: Christoph Lameter Signed-off-by: Pekka Enberg --- include/linux/slub_def.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index c8668d161dd8..b42715294147 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -33,6 +33,7 @@ enum stat_item { DEACTIVATE_REMOTE_FREES,/* Slab contained remotely freed objects */ ORDER_FALLBACK, /* Number of times fallback was necessary */ CMPXCHG_DOUBLE_CPU_FAIL,/* Failure of this_cpu_cmpxchg_double */ + CMPXCHG_DOUBLE_FAIL, /* Number of times that cmpxchg double did not match */ NR_SLUB_STAT_ITEMS }; struct kmem_cache_cpu { -- cgit v1.2.3 From e36a2652d7d1ad97f7636a39bdd8654d296cc36b Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Wed, 1 Jun 2011 12:25:57 -0500 Subject: slub: Add statistics for the case that the current slab does not match the node Slub reloads the per cpu slab if the page does not satisfy the NUMA condition. Track those reloads since doing so has a performance impact. Signed-off-by: Christoph Lameter Signed-off-by: Pekka Enberg --- include/linux/slub_def.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index b42715294147..5b228b785377 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -24,6 +24,7 @@ enum stat_item { ALLOC_FROM_PARTIAL, /* Cpu slab acquired from partial list */ ALLOC_SLAB, /* Cpu slab acquired from page allocator */ ALLOC_REFILL, /* Refill cpu slab from slab freelist */ + ALLOC_NODE_MISMATCH, /* Switching cpu slab */ FREE_SLAB, /* Slab freed to the page allocator */ CPUSLAB_FLUSH, /* Abandoning of the cpu slab */ DEACTIVATE_FULL, /* Cpu slab was full when deactivated */ -- cgit v1.2.3 From 03e404af26dc2ea0d278d7a342de0aab394793ce Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Wed, 1 Jun 2011 12:25:58 -0500 Subject: slub: fast release on full slab Make deactivation occur implicitly while checking out the current freelist. This avoids one cmpxchg operation on a slab that is now fully in use. Signed-off-by: Christoph Lameter Signed-off-by: Pekka Enberg --- include/linux/slub_def.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index 5b228b785377..71441f89729b 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -32,6 +32,7 @@ enum stat_item { DEACTIVATE_TO_HEAD, /* Cpu slab was moved to the head of partials */ DEACTIVATE_TO_TAIL, /* Cpu slab was moved to the tail of partials */ DEACTIVATE_REMOTE_FREES,/* Slab contained remotely freed objects */ + DEACTIVATE_BYPASS, /* Implicit deactivation */ ORDER_FALLBACK, /* Number of times fallback was necessary */ CMPXCHG_DOUBLE_CPU_FAIL,/* Failure of this_cpu_cmpxchg_double */ CMPXCHG_DOUBLE_FAIL, /* Number of times that cmpxchg double did not match */ -- cgit v1.2.3 From 57fe7251f5bfc4332f24479376de48a1e8ca6211 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 31 May 2011 12:02:49 +0300 Subject: MFD: twl4030-codec -> twl4030-audio: Rename the driver Rename the driver, and header file from twl4030-codec to twl4030-audio. To avoid breakage change depending drivers at the same time. Signed-off-by: Peter Ujfalusi CC: Misael Lopez Cruz Acked-by: Samuel Ortiz --- include/linux/mfd/twl4030-audio.h | 272 ++++++++++++++++++++++++++++++++++++++ include/linux/mfd/twl4030-codec.h | 272 -------------------------------------- 2 files changed, 272 insertions(+), 272 deletions(-) create mode 100644 include/linux/mfd/twl4030-audio.h delete mode 100644 include/linux/mfd/twl4030-codec.h (limited to 'include/linux') diff --git a/include/linux/mfd/twl4030-audio.h b/include/linux/mfd/twl4030-audio.h new file mode 100644 index 000000000000..3d22b72df076 --- /dev/null +++ b/include/linux/mfd/twl4030-audio.h @@ -0,0 +1,272 @@ +/* + * MFD driver for twl4030 audio submodule + * + * Author: Peter Ujfalusi + * + * Copyright: (C) 2009 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __TWL4030_CODEC_H__ +#define __TWL4030_CODEC_H__ + +/* Codec registers */ +#define TWL4030_REG_CODEC_MODE 0x01 +#define TWL4030_REG_OPTION 0x02 +#define TWL4030_REG_UNKNOWN 0x03 +#define TWL4030_REG_MICBIAS_CTL 0x04 +#define TWL4030_REG_ANAMICL 0x05 +#define TWL4030_REG_ANAMICR 0x06 +#define TWL4030_REG_AVADC_CTL 0x07 +#define TWL4030_REG_ADCMICSEL 0x08 +#define TWL4030_REG_DIGMIXING 0x09 +#define TWL4030_REG_ATXL1PGA 0x0A +#define TWL4030_REG_ATXR1PGA 0x0B +#define TWL4030_REG_AVTXL2PGA 0x0C +#define TWL4030_REG_AVTXR2PGA 0x0D +#define TWL4030_REG_AUDIO_IF 0x0E +#define TWL4030_REG_VOICE_IF 0x0F +#define TWL4030_REG_ARXR1PGA 0x10 +#define TWL4030_REG_ARXL1PGA 0x11 +#define TWL4030_REG_ARXR2PGA 0x12 +#define TWL4030_REG_ARXL2PGA 0x13 +#define TWL4030_REG_VRXPGA 0x14 +#define TWL4030_REG_VSTPGA 0x15 +#define TWL4030_REG_VRX2ARXPGA 0x16 +#define TWL4030_REG_AVDAC_CTL 0x17 +#define TWL4030_REG_ARX2VTXPGA 0x18 +#define TWL4030_REG_ARXL1_APGA_CTL 0x19 +#define TWL4030_REG_ARXR1_APGA_CTL 0x1A +#define TWL4030_REG_ARXL2_APGA_CTL 0x1B +#define TWL4030_REG_ARXR2_APGA_CTL 0x1C +#define TWL4030_REG_ATX2ARXPGA 0x1D +#define TWL4030_REG_BT_IF 0x1E +#define TWL4030_REG_BTPGA 0x1F +#define TWL4030_REG_BTSTPGA 0x20 +#define TWL4030_REG_EAR_CTL 0x21 +#define TWL4030_REG_HS_SEL 0x22 +#define TWL4030_REG_HS_GAIN_SET 0x23 +#define TWL4030_REG_HS_POPN_SET 0x24 +#define TWL4030_REG_PREDL_CTL 0x25 +#define TWL4030_REG_PREDR_CTL 0x26 +#define TWL4030_REG_PRECKL_CTL 0x27 +#define TWL4030_REG_PRECKR_CTL 0x28 +#define TWL4030_REG_HFL_CTL 0x29 +#define TWL4030_REG_HFR_CTL 0x2A +#define TWL4030_REG_ALC_CTL 0x2B +#define TWL4030_REG_ALC_SET1 0x2C +#define TWL4030_REG_ALC_SET2 0x2D +#define TWL4030_REG_BOOST_CTL 0x2E +#define TWL4030_REG_SOFTVOL_CTL 0x2F +#define TWL4030_REG_DTMF_FREQSEL 0x30 +#define TWL4030_REG_DTMF_TONEXT1H 0x31 +#define TWL4030_REG_DTMF_TONEXT1L 0x32 +#define TWL4030_REG_DTMF_TONEXT2H 0x33 +#define TWL4030_REG_DTMF_TONEXT2L 0x34 +#define TWL4030_REG_DTMF_TONOFF 0x35 +#define TWL4030_REG_DTMF_WANONOFF 0x36 +#define TWL4030_REG_I2S_RX_SCRAMBLE_H 0x37 +#define TWL4030_REG_I2S_RX_SCRAMBLE_M 0x38 +#define TWL4030_REG_I2S_RX_SCRAMBLE_L 0x39 +#define TWL4030_REG_APLL_CTL 0x3A +#define TWL4030_REG_DTMF_CTL 0x3B +#define TWL4030_REG_DTMF_PGA_CTL2 0x3C +#define TWL4030_REG_DTMF_PGA_CTL1 0x3D +#define TWL4030_REG_MISC_SET_1 0x3E +#define TWL4030_REG_PCMBTMUX 0x3F +#define TWL4030_REG_RX_PATH_SEL 0x43 +#define TWL4030_REG_VDL_APGA_CTL 0x44 +#define TWL4030_REG_VIBRA_CTL 0x45 +#define TWL4030_REG_VIBRA_SET 0x46 +#define TWL4030_REG_VIBRA_PWM_SET 0x47 +#define TWL4030_REG_ANAMIC_GAIN 0x48 +#define TWL4030_REG_MISC_SET_2 0x49 + +/* Bitfield Definitions */ + +/* TWL4030_CODEC_MODE (0x01) Fields */ +#define TWL4030_APLL_RATE 0xF0 +#define TWL4030_APLL_RATE_8000 0x00 +#define TWL4030_APLL_RATE_11025 0x10 +#define TWL4030_APLL_RATE_12000 0x20 +#define TWL4030_APLL_RATE_16000 0x40 +#define TWL4030_APLL_RATE_22050 0x50 +#define TWL4030_APLL_RATE_24000 0x60 +#define TWL4030_APLL_RATE_32000 0x80 +#define TWL4030_APLL_RATE_44100 0x90 +#define TWL4030_APLL_RATE_48000 0xA0 +#define TWL4030_APLL_RATE_96000 0xE0 +#define TWL4030_SEL_16K 0x08 +#define TWL4030_CODECPDZ 0x02 +#define TWL4030_OPT_MODE 0x01 +#define TWL4030_OPTION_1 (1 << 0) +#define TWL4030_OPTION_2 (0 << 0) + +/* TWL4030_OPTION (0x02) Fields */ +#define TWL4030_ATXL1_EN (1 << 0) +#define TWL4030_ATXR1_EN (1 << 1) +#define TWL4030_ATXL2_VTXL_EN (1 << 2) +#define TWL4030_ATXR2_VTXR_EN (1 << 3) +#define TWL4030_ARXL1_VRX_EN (1 << 4) +#define TWL4030_ARXR1_EN (1 << 5) +#define TWL4030_ARXL2_EN (1 << 6) +#define TWL4030_ARXR2_EN (1 << 7) + +/* TWL4030_REG_MICBIAS_CTL (0x04) Fields */ +#define TWL4030_MICBIAS2_CTL 0x40 +#define TWL4030_MICBIAS1_CTL 0x20 +#define TWL4030_HSMICBIAS_EN 0x04 +#define TWL4030_MICBIAS2_EN 0x02 +#define TWL4030_MICBIAS1_EN 0x01 + +/* ANAMICL (0x05) Fields */ +#define TWL4030_CNCL_OFFSET_START 0x80 +#define TWL4030_OFFSET_CNCL_SEL 0x60 +#define TWL4030_OFFSET_CNCL_SEL_ARX1 0x00 +#define TWL4030_OFFSET_CNCL_SEL_ARX2 0x20 +#define TWL4030_OFFSET_CNCL_SEL_VRX 0x40 +#define TWL4030_OFFSET_CNCL_SEL_ALL 0x60 +#define TWL4030_MICAMPL_EN 0x10 +#define TWL4030_CKMIC_EN 0x08 +#define TWL4030_AUXL_EN 0x04 +#define TWL4030_HSMIC_EN 0x02 +#define TWL4030_MAINMIC_EN 0x01 + +/* ANAMICR (0x06) Fields */ +#define TWL4030_MICAMPR_EN 0x10 +#define TWL4030_AUXR_EN 0x04 +#define TWL4030_SUBMIC_EN 0x01 + +/* AVADC_CTL (0x07) Fields */ +#define TWL4030_ADCL_EN 0x08 +#define TWL4030_AVADC_CLK_PRIORITY 0x04 +#define TWL4030_ADCR_EN 0x02 + +/* TWL4030_REG_ADCMICSEL (0x08) Fields */ +#define TWL4030_DIGMIC1_EN 0x08 +#define TWL4030_TX2IN_SEL 0x04 +#define TWL4030_DIGMIC0_EN 0x02 +#define TWL4030_TX1IN_SEL 0x01 + +/* AUDIO_IF (0x0E) Fields */ +#define TWL4030_AIF_SLAVE_EN 0x80 +#define TWL4030_DATA_WIDTH 0x60 +#define TWL4030_DATA_WIDTH_16S_16W 0x00 +#define TWL4030_DATA_WIDTH_32S_16W 0x40 +#define TWL4030_DATA_WIDTH_32S_24W 0x60 +#define TWL4030_AIF_FORMAT 0x18 +#define TWL4030_AIF_FORMAT_CODEC 0x00 +#define TWL4030_AIF_FORMAT_LEFT 0x08 +#define TWL4030_AIF_FORMAT_RIGHT 0x10 +#define TWL4030_AIF_FORMAT_TDM 0x18 +#define TWL4030_AIF_TRI_EN 0x04 +#define TWL4030_CLK256FS_EN 0x02 +#define TWL4030_AIF_EN 0x01 + +/* VOICE_IF (0x0F) Fields */ +#define TWL4030_VIF_SLAVE_EN 0x80 +#define TWL4030_VIF_DIN_EN 0x40 +#define TWL4030_VIF_DOUT_EN 0x20 +#define TWL4030_VIF_SWAP 0x10 +#define TWL4030_VIF_FORMAT 0x08 +#define TWL4030_VIF_TRI_EN 0x04 +#define TWL4030_VIF_SUB_EN 0x02 +#define TWL4030_VIF_EN 0x01 + +/* EAR_CTL (0x21) */ +#define TWL4030_EAR_GAIN 0x30 + +/* HS_GAIN_SET (0x23) Fields */ +#define TWL4030_HSR_GAIN 0x0C +#define TWL4030_HSR_GAIN_PWR_DOWN 0x00 +#define TWL4030_HSR_GAIN_PLUS_6DB 0x04 +#define TWL4030_HSR_GAIN_0DB 0x08 +#define TWL4030_HSR_GAIN_MINUS_6DB 0x0C +#define TWL4030_HSL_GAIN 0x03 +#define TWL4030_HSL_GAIN_PWR_DOWN 0x00 +#define TWL4030_HSL_GAIN_PLUS_6DB 0x01 +#define TWL4030_HSL_GAIN_0DB 0x02 +#define TWL4030_HSL_GAIN_MINUS_6DB 0x03 + +/* HS_POPN_SET (0x24) Fields */ +#define TWL4030_VMID_EN 0x40 +#define TWL4030_EXTMUTE 0x20 +#define TWL4030_RAMP_DELAY 0x1C +#define TWL4030_RAMP_DELAY_20MS 0x00 +#define TWL4030_RAMP_DELAY_40MS 0x04 +#define TWL4030_RAMP_DELAY_81MS 0x08 +#define TWL4030_RAMP_DELAY_161MS 0x0C +#define TWL4030_RAMP_DELAY_323MS 0x10 +#define TWL4030_RAMP_DELAY_645MS 0x14 +#define TWL4030_RAMP_DELAY_1291MS 0x18 +#define TWL4030_RAMP_DELAY_2581MS 0x1C +#define TWL4030_RAMP_EN 0x02 + +/* PREDL_CTL (0x25) */ +#define TWL4030_PREDL_GAIN 0x30 + +/* PREDR_CTL (0x26) */ +#define TWL4030_PREDR_GAIN 0x30 + +/* PRECKL_CTL (0x27) */ +#define TWL4030_PRECKL_GAIN 0x30 + +/* PRECKR_CTL (0x28) */ +#define TWL4030_PRECKR_GAIN 0x30 + +/* HFL_CTL (0x29, 0x2A) Fields */ +#define TWL4030_HF_CTL_HB_EN 0x04 +#define TWL4030_HF_CTL_LOOP_EN 0x08 +#define TWL4030_HF_CTL_RAMP_EN 0x10 +#define TWL4030_HF_CTL_REF_EN 0x20 + +/* APLL_CTL (0x3A) Fields */ +#define TWL4030_APLL_EN 0x10 +#define TWL4030_APLL_INFREQ 0x0F +#define TWL4030_APLL_INFREQ_19200KHZ 0x05 +#define TWL4030_APLL_INFREQ_26000KHZ 0x06 +#define TWL4030_APLL_INFREQ_38400KHZ 0x0F + +/* REG_MISC_SET_1 (0x3E) Fields */ +#define TWL4030_CLK64_EN 0x80 +#define TWL4030_SCRAMBLE_EN 0x40 +#define TWL4030_FMLOOP_EN 0x20 +#define TWL4030_SMOOTH_ANAVOL_EN 0x02 +#define TWL4030_DIGMIC_LR_SWAP_EN 0x01 + +/* VIBRA_CTL (0x45) */ +#define TWL4030_VIBRA_EN 0x01 +#define TWL4030_VIBRA_DIR 0x02 +#define TWL4030_VIBRA_AUDIO_SEL_L1 (0x00 << 2) +#define TWL4030_VIBRA_AUDIO_SEL_R1 (0x01 << 2) +#define TWL4030_VIBRA_AUDIO_SEL_L2 (0x02 << 2) +#define TWL4030_VIBRA_AUDIO_SEL_R2 (0x03 << 2) +#define TWL4030_VIBRA_SEL 0x10 +#define TWL4030_VIBRA_DIR_SEL 0x20 + +/* TWL4030 codec resource IDs */ +enum twl4030_audio_res { + TWL4030_AUDIO_RES_POWER = 0, + TWL4030_AUDIO_RES_APLL, + TWL4030_AUDIO_RES_MAX, +}; + +int twl4030_audio_disable_resource(enum twl4030_audio_res id); +int twl4030_audio_enable_resource(enum twl4030_audio_res id); +unsigned int twl4030_audio_get_mclk(void); + +#endif /* End of __TWL4030_CODEC_H__ */ diff --git a/include/linux/mfd/twl4030-codec.h b/include/linux/mfd/twl4030-codec.h deleted file mode 100644 index 5cc16bbd1da1..000000000000 --- a/include/linux/mfd/twl4030-codec.h +++ /dev/null @@ -1,272 +0,0 @@ -/* - * MFD driver for twl4030 codec submodule - * - * Author: Peter Ujfalusi - * - * Copyright: (C) 2009 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __TWL4030_CODEC_H__ -#define __TWL4030_CODEC_H__ - -/* Codec registers */ -#define TWL4030_REG_CODEC_MODE 0x01 -#define TWL4030_REG_OPTION 0x02 -#define TWL4030_REG_UNKNOWN 0x03 -#define TWL4030_REG_MICBIAS_CTL 0x04 -#define TWL4030_REG_ANAMICL 0x05 -#define TWL4030_REG_ANAMICR 0x06 -#define TWL4030_REG_AVADC_CTL 0x07 -#define TWL4030_REG_ADCMICSEL 0x08 -#define TWL4030_REG_DIGMIXING 0x09 -#define TWL4030_REG_ATXL1PGA 0x0A -#define TWL4030_REG_ATXR1PGA 0x0B -#define TWL4030_REG_AVTXL2PGA 0x0C -#define TWL4030_REG_AVTXR2PGA 0x0D -#define TWL4030_REG_AUDIO_IF 0x0E -#define TWL4030_REG_VOICE_IF 0x0F -#define TWL4030_REG_ARXR1PGA 0x10 -#define TWL4030_REG_ARXL1PGA 0x11 -#define TWL4030_REG_ARXR2PGA 0x12 -#define TWL4030_REG_ARXL2PGA 0x13 -#define TWL4030_REG_VRXPGA 0x14 -#define TWL4030_REG_VSTPGA 0x15 -#define TWL4030_REG_VRX2ARXPGA 0x16 -#define TWL4030_REG_AVDAC_CTL 0x17 -#define TWL4030_REG_ARX2VTXPGA 0x18 -#define TWL4030_REG_ARXL1_APGA_CTL 0x19 -#define TWL4030_REG_ARXR1_APGA_CTL 0x1A -#define TWL4030_REG_ARXL2_APGA_CTL 0x1B -#define TWL4030_REG_ARXR2_APGA_CTL 0x1C -#define TWL4030_REG_ATX2ARXPGA 0x1D -#define TWL4030_REG_BT_IF 0x1E -#define TWL4030_REG_BTPGA 0x1F -#define TWL4030_REG_BTSTPGA 0x20 -#define TWL4030_REG_EAR_CTL 0x21 -#define TWL4030_REG_HS_SEL 0x22 -#define TWL4030_REG_HS_GAIN_SET 0x23 -#define TWL4030_REG_HS_POPN_SET 0x24 -#define TWL4030_REG_PREDL_CTL 0x25 -#define TWL4030_REG_PREDR_CTL 0x26 -#define TWL4030_REG_PRECKL_CTL 0x27 -#define TWL4030_REG_PRECKR_CTL 0x28 -#define TWL4030_REG_HFL_CTL 0x29 -#define TWL4030_REG_HFR_CTL 0x2A -#define TWL4030_REG_ALC_CTL 0x2B -#define TWL4030_REG_ALC_SET1 0x2C -#define TWL4030_REG_ALC_SET2 0x2D -#define TWL4030_REG_BOOST_CTL 0x2E -#define TWL4030_REG_SOFTVOL_CTL 0x2F -#define TWL4030_REG_DTMF_FREQSEL 0x30 -#define TWL4030_REG_DTMF_TONEXT1H 0x31 -#define TWL4030_REG_DTMF_TONEXT1L 0x32 -#define TWL4030_REG_DTMF_TONEXT2H 0x33 -#define TWL4030_REG_DTMF_TONEXT2L 0x34 -#define TWL4030_REG_DTMF_TONOFF 0x35 -#define TWL4030_REG_DTMF_WANONOFF 0x36 -#define TWL4030_REG_I2S_RX_SCRAMBLE_H 0x37 -#define TWL4030_REG_I2S_RX_SCRAMBLE_M 0x38 -#define TWL4030_REG_I2S_RX_SCRAMBLE_L 0x39 -#define TWL4030_REG_APLL_CTL 0x3A -#define TWL4030_REG_DTMF_CTL 0x3B -#define TWL4030_REG_DTMF_PGA_CTL2 0x3C -#define TWL4030_REG_DTMF_PGA_CTL1 0x3D -#define TWL4030_REG_MISC_SET_1 0x3E -#define TWL4030_REG_PCMBTMUX 0x3F -#define TWL4030_REG_RX_PATH_SEL 0x43 -#define TWL4030_REG_VDL_APGA_CTL 0x44 -#define TWL4030_REG_VIBRA_CTL 0x45 -#define TWL4030_REG_VIBRA_SET 0x46 -#define TWL4030_REG_VIBRA_PWM_SET 0x47 -#define TWL4030_REG_ANAMIC_GAIN 0x48 -#define TWL4030_REG_MISC_SET_2 0x49 - -/* Bitfield Definitions */ - -/* TWL4030_CODEC_MODE (0x01) Fields */ -#define TWL4030_APLL_RATE 0xF0 -#define TWL4030_APLL_RATE_8000 0x00 -#define TWL4030_APLL_RATE_11025 0x10 -#define TWL4030_APLL_RATE_12000 0x20 -#define TWL4030_APLL_RATE_16000 0x40 -#define TWL4030_APLL_RATE_22050 0x50 -#define TWL4030_APLL_RATE_24000 0x60 -#define TWL4030_APLL_RATE_32000 0x80 -#define TWL4030_APLL_RATE_44100 0x90 -#define TWL4030_APLL_RATE_48000 0xA0 -#define TWL4030_APLL_RATE_96000 0xE0 -#define TWL4030_SEL_16K 0x08 -#define TWL4030_CODECPDZ 0x02 -#define TWL4030_OPT_MODE 0x01 -#define TWL4030_OPTION_1 (1 << 0) -#define TWL4030_OPTION_2