From d92aabca4df182763cd541d342f2d55f8c0a827c Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sat, 25 Jul 2020 21:15:20 -0700 Subject: firmware: bcm47xx_sprom: Fix -Wmissing-prototypes warnings bcm47xx_sprom.h did not include a prototype for bcm47xx_fill_sprom() therefore add one, and make sure we do include that header to fix -Wmissing-prototypes warnings. Reported-by: kernel test robot Signed-off-by: Florian Fainelli Signed-off-by: Thomas Bogendoerfer --- include/linux/bcm47xx_sprom.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bcm47xx_sprom.h b/include/linux/bcm47xx_sprom.h index b0f4424f34fc..f8254fd53e15 100644 --- a/include/linux/bcm47xx_sprom.h +++ b/include/linux/bcm47xx_sprom.h @@ -9,9 +9,19 @@ #include #include +struct ssb_sprom; + #ifdef CONFIG_BCM47XX_SPROM +void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix, + bool fallback); int bcm47xx_sprom_register_fallbacks(void); #else +static inline void bcm47xx_fill_sprom(struct ssb_sprom *sprom, + const char *prefix, + bool fallback) +{ +} + static inline int bcm47xx_sprom_register_fallbacks(void) { return -ENOTSUPP; -- cgit v1.2.3 From c2fe8ebb332eefb3d0543b248e28dd2992c04793 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 4 Aug 2020 21:26:42 +0200 Subject: clk: samsung: s3c64xx: declare s3c64xx_clk_init() in shared header The s3c64xx_clk_init() is defined and used by the clk-s3c64xx driver and also used in the mach-s3c64xx machine code. Move the declaration to a header to fix W=1 build warning: drivers/clk/samsung/clk-s3c64xx.c:391:13: warning: no previous prototype for 's3c64xx_clk_init' [-Wmissing-prototypes] 391 | void __init s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f, Signed-off-by: Krzysztof Kozlowski Reviewed-by: Tomasz Figa Acked-by: Chanwoo Choi Reviewed-by: Stephen Boyd --- include/linux/clk/samsung.h | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 include/linux/clk/samsung.h (limited to 'include/linux') diff --git a/include/linux/clk/samsung.h b/include/linux/clk/samsung.h new file mode 100644 index 000000000000..7a0824b22eed --- /dev/null +++ b/include/linux/clk/samsung.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2020 Krzysztof Kozlowski + */ + +#ifndef __LINUX_CLK_SAMSUNG_H_ +#define __LINUX_CLK_SAMSUNG_H_ + +#include + +struct device_node; + +#ifdef CONFIG_ARCH_S3C64XX +void s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f, + unsigned long xusbxti_f, bool s3c6400, + void __iomem *base); +#else +static inline void s3c64xx_clk_init(struct device_node *np, + unsigned long xtal_f, + unsigned long xusbxti_f, + bool s3c6400, void __iomem *base) { } +#endif /* CONFIG_ARCH_S3C64XX */ + +#endif /* __LINUX_CLK_SAMSUNG_H_ */ -- cgit v1.2.3 From 16b17fcf77f2145b98cabbca6bfe6ea13c90bb08 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 4 Aug 2020 21:26:43 +0200 Subject: clk: samsung: s3c24xx: declare s3c24xx_common_clk_init() in shared header The s3c2410_common_clk_init() and others are defined and used by the clk-s3c24xx driver and also used in the mach-s3c24xx machine code. Move the declaration to a header to fix W=1 build warnings: drivers/clk/samsung/clk-s3c2410.c:320:13: warning: no previous prototype for 's3c2410_common_clk_init' [-Wmissing-prototypes] 320 | void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f, drivers/clk/samsung/clk-s3c2412.c:205:13: warning: no previous prototype for 's3c2412_common_clk_init' [-Wmissing-prototypes] 205 | void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f, drivers/clk/samsung/clk-s3c2443.c:341:13: warning: no previous prototype for 's3c2443_common_clk_init' [-Wmissing-prototypes] 341 | void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f, Signed-off-by: Krzysztof Kozlowski Acked-by: Chanwoo Choi Reviewed-by: Stephen Boyd --- include/linux/clk/samsung.h | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'include/linux') diff --git a/include/linux/clk/samsung.h b/include/linux/clk/samsung.h index 7a0824b22eed..79097e365f7f 100644 --- a/include/linux/clk/samsung.h +++ b/include/linux/clk/samsung.h @@ -21,4 +21,36 @@ static inline void s3c64xx_clk_init(struct device_node *np, bool s3c6400, void __iomem *base) { } #endif /* CONFIG_ARCH_S3C64XX */ +#ifdef CONFIG_S3C2410_COMMON_CLK +void s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f, + int current_soc, + void __iomem *reg_base); +#else +static inline void s3c2410_common_clk_init(struct device_node *np, + unsigned long xti_f, + int current_soc, + void __iomem *reg_base) { } +#endif /* CONFIG_S3C2410_COMMON_CLK */ + +#ifdef CONFIG_S3C2412_COMMON_CLK +void s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f, + unsigned long ext_f, void __iomem *reg_base); +#else +static inline void s3c2412_common_clk_init(struct device_node *np, + unsigned long xti_f, + unsigned long ext_f, + void __iomem *reg_base) { } +#endif /* CONFIG_S3C2412_COMMON_CLK */ + +#ifdef CONFIG_S3C2443_COMMON_CLK +void s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f, + int current_soc, + void __iomem *reg_base); +#else +static inline void s3c2443_common_clk_init(struct device_node *np, + unsigned long xti_f, + int current_soc, + void __iomem *reg_base) { } +#endif /* CONFIG_S3C2443_COMMON_CLK */ + #endif /* __LINUX_CLK_SAMSUNG_H_ */ -- cgit v1.2.3 From b84e23f5135103c45022b0e4a4ed2459d5398a7e Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 6 Aug 2020 20:20:23 +0200 Subject: ARM: s3c24xx: pass pointer to clk driver via platform data Passing pointers directly as platform data is fragile and undocumented. Better to create a platform data structure which explicitly documents what is passed to the driver. Suggested-by: Tomasz Figa Signed-off-by: Krzysztof Kozlowski Acked-by: Arnd Bergmann Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/20200806182059.2431-6-krzk@kernel.org --- include/linux/platform_data/clk-s3c2410.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 include/linux/platform_data/clk-s3c2410.h (limited to 'include/linux') diff --git a/include/linux/platform_data/clk-s3c2410.h b/include/linux/platform_data/clk-s3c2410.h new file mode 100644 index 000000000000..7eb1cfa5409b --- /dev/null +++ b/include/linux/platform_data/clk-s3c2410.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2020 Krzysztof Kozlowski + */ + +#ifndef __LINUX_PLATFORM_DATA_CLK_S3C2410_H_ +#define __LINUX_PLATFORM_DATA_CLK_S3C2410_H_ + +/** + * struct s3c2410_clk_platform_data - platform data for S3C2410 clock driver + * + * @modify_misccr: Function to modify the MISCCR and return the new value + */ +struct s3c2410_clk_platform_data { + unsigned int (*modify_misccr)(unsigned int clr, unsigned int chg); +}; + +#endif /* __LINUX_PLATFORM_DATA_CLK_S3C2410_H_ */ + -- cgit v1.2.3 From 5f745424761a2a49762625e8616417a8e7694228 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 6 Aug 2020 20:20:26 +0200 Subject: usb: gadget: s3c-hsudc: remove platform header dependency There is no real phy driver, so s3c-hsudc just pokes the registers itself. Improve this a little by making it a platform data callback like we do for gpios. There is only one board using this driver, and it's unlikely that another would be added, so this is a minimal workaround. Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20200806182059.2431-9-krzk@kernel.org [krzk: Include regs-s3c2443-clock.h in ifdef to fixup build on s3c6400] Signed-off-by: Krzysztof Kozlowski --- include/linux/platform_data/s3c-hsudc.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/platform_data/s3c-hsudc.h b/include/linux/platform_data/s3c-hsudc.h index 4dc9b8760166..a170939832d5 100644 --- a/include/linux/platform_data/s3c-hsudc.h +++ b/include/linux/platform_data/s3c-hsudc.h @@ -26,6 +26,8 @@ struct s3c24xx_hsudc_platdata { unsigned int epnum; void (*gpio_init)(void); void (*gpio_uninit)(void); + void (*phy_init)(void); + void (*phy_uninit)(void); }; #endif /* __LINUX_USB_S3C_HSUDC_H */ -- cgit v1.2.3 From 17132da70eb766785b9b4677bacce18cc11ea442 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 6 Aug 2020 20:20:33 +0200 Subject: ARM: samsung: move pm check code to drivers/soc This is the only part of plat-samsung that is really shared between the s3c and s5p ports. Moving it to drivers/soc/ lets us make them completely independent. Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20200806182059.2431-16-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski --- include/linux/soc/samsung/s3c-pm.h | 84 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 84 insertions(+) create mode 100644 include/linux/soc/samsung/s3c-pm.h (limited to 'include/linux') diff --git a/include/linux/soc/samsung/s3c-pm.h b/include/linux/soc/samsung/s3c-pm.h new file mode 100644 index 000000000000..730bd1d3d09a --- /dev/null +++ b/include/linux/soc/samsung/s3c-pm.h @@ -0,0 +1,84 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Tomasz Figa + * Copyright (c) 2004 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Written by Ben Dooks, + */ + +#ifndef __LINUX_SOC_SAMSUNG_S3C_PM_H +#define __LINUX_SOC_SAMSUNG_S3C_PM_H __FILE__ + +#include + +/* PM debug functions */ + +/** + * struct pm_uart_save - save block for core UART + * @ulcon: Save value for S3C2410_ULCON + * @ucon: Save value for S3C2410_UCON + * @ufcon: Save value for S3C2410_UFCON + * @umcon: Save value for S3C2410_UMCON + * @ubrdiv: Save value for S3C2410_UBRDIV + * + * Save block for UART registers to be held over sleep and restored if they + * are needed (say by debug). +*/ +struct pm_uart_save { + u32 ulcon; + u32 ucon; + u32 ufcon; + u32 umcon; + u32 ubrdiv; + u32 udivslot; +}; + +#ifdef CONFIG_SAMSUNG_PM_DEBUG +/** + * s3c_pm_dbg() - low level debug function for use in suspend/resume. + * @msg: The message to print. + * + * This function is used mainly to debug the resume process before the system + * can rely on printk/console output. It uses the low-level debugging output + * routine printascii() to do its work. + */ +extern void s3c_pm_dbg(const char *msg, ...); + +#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt) + +extern void s3c_pm_save_uarts(bool is_s3c24xx); +extern void s3c_pm_restore_uarts(bool is_s3c24xx); + +#ifdef CONFIG_ARCH_S3C64XX +extern void s3c_pm_arch_update_uart(void __iomem *regs, + struct pm_uart_save *save); +#else +static inline void +s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save) +{ +} +#endif + +#else +#define S3C_PMDBG(fmt...) pr_debug(fmt) + +static inline void s3c_pm_save_uarts(bool is_s3c24xx) { } +static inline void s3c_pm_restore_uarts(bool is_s3c24xx) { } +#endif + +/* suspend memory checking */ + +#ifdef CONFIG_SAMSUNG_PM_CHECK +extern void s3c_pm_check_prepare(void); +extern void s3c_pm_check_restore(void); +extern void s3c_pm_check_cleanup(void); +extern void s3c_pm_check_store(void); +#else +#define s3c_pm_check_prepare() do { } while (0) +#define s3c_pm_check_restore() do { } while (0) +#define s3c_pm_check_cleanup() do { } while (0) +#define s3c_pm_check_store() do { } while (0) +#endif + +#endif -- cgit v1.2.3 From 7dbad03ebcb924cde142f7477d65a54ffb1166a3 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 6 Aug 2020 20:20:39 +0200 Subject: ARM: s3c: adc: move header to linux/soc/samsung There are multiple drivers using the private adc interface. It seems unlikely that they would ever get converted to iio, so make the current state official by making the header file global. The s3c2410_ts driver needs a couple of register definitions as well. Signed-off-by: Arnd Bergmann Acked-by: Guenter Roeck Acked-by: Dmitry Torokhov Acked-by: Sebastian Reichel Link: https://lore.kernel.org/r/20200806182059.2431-22-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski --- include/linux/soc/samsung/s3c-adc.h | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 include/linux/soc/samsung/s3c-adc.h (limited to 'include/linux') diff --git a/include/linux/soc/samsung/s3c-adc.h b/include/linux/soc/samsung/s3c-adc.h new file mode 100644 index 000000000000..591c94ef957d --- /dev/null +++ b/include/linux/soc/samsung/s3c-adc.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C ADC driver information + */ + +#ifndef __LINUX_SOC_SAMSUNG_S3C_ADC_H +#define __LINUX_SOC_SAMSUNG_S3C_ADC_H __FILE__ + +struct s3c_adc_client; +struct platform_device; + +extern int s3c_adc_start(struct s3c_adc_client *client, + unsigned int channel, unsigned int nr_samples); + +extern int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch); + +extern struct s3c_adc_client * + s3c_adc_register(struct platform_device *pdev, + void (*select)(struct s3c_adc_client *client, + unsigned selected), + void (*conv)(struct s3c_adc_client *client, + unsigned d0, unsigned d1, + unsigned *samples_left), + unsigned int is_ts); + +extern void s3c_adc_release(struct s3c_adc_client *client); + +#endif /* __LINUX_SOC_SAMSUNG_S3C_ADC_H */ -- cgit v1.2.3 From f131a4443ea468cd532410c271c229bb39caab08 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 3 Sep 2019 11:31:09 +0200 Subject: ARM: s3c24xx: move spi fiq handler into platform The fiq handler needs access to some register definitions that should not be used directly by device drivers. Since this is closely related to the irqchip driver anyway, move it into the same place. Signed-off-by: Arnd Bergmann [krzk: Add a header guard in include/linux/spi/s3c24xx-fiq.h, fix SPDX comment style, update maintainer's entry] Co-developed-by: Krzysztof Kozlowski Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20200806182059.2431-23-krzk%40kernel.org Acked-by: Mark Brown --- include/linux/spi/s3c24xx-fiq.h | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 include/linux/spi/s3c24xx-fiq.h (limited to 'include/linux') diff --git a/include/linux/spi/s3c24xx-fiq.h b/include/linux/spi/s3c24xx-fiq.h new file mode 100644 index 000000000000..d2842ac1de27 --- /dev/null +++ b/include/linux/spi/s3c24xx-fiq.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* linux/drivers/spi/spi_s3c24xx_fiq.h + * + * Copyright 2009 Simtec Electronics + * Ben Dooks + * + * S3C24XX SPI - FIQ pseudo-DMA transfer support +*/ + +#ifndef __LINUX_SPI_S3C24XX_FIQ_H +#define __LINUX_SPI_S3C24XX_FIQ_H __FILE__ + +/* We have R8 through R13 to play with */ + +#ifdef __ASSEMBLY__ +#define __REG_NR(x) r##x +#else + +extern struct spi_fiq_code s3c24xx_spi_fiq_txrx; +extern struct spi_fiq_code s3c24xx_spi_fiq_tx; +extern struct spi_fiq_code s3c24xx_spi_fiq_rx; + +#define __REG_NR(x) (x) +#endif + +#define fiq_rspi __REG_NR(8) +#define fiq_rtmp __REG_NR(9) +#define fiq_rrx __REG_NR(10) +#define fiq_rtx __REG_NR(11) +#define fiq_rcount __REG_NR(12) +#define fiq_rirq __REG_NR(13) + +#endif /* __LINUX_SPI_S3C24XX_FIQ_H */ -- cgit v1.2.3 From b558b6c24068d87ffcd95dad3bf0d9bd2ac290e9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Maciej=20=C5=BBenczykowski?= Date: Tue, 18 Aug 2020 18:07:09 -0700 Subject: net-tun: Add type safety to tun_xdp_to_ptr() and tun_ptr_to_xdp() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reduces likelihood of incorrect use. Test: builds Signed-off-by: Maciej Żenczykowski Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20200819010710.3959310-1-zenczykowski@gmail.com --- include/linux/if_tun.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h index 5bda8cf457b6..6c37e1dbc5df 100644 --- a/include/linux/if_tun.h +++ b/include/linux/if_tun.h @@ -28,8 +28,8 @@ struct tun_xdp_hdr { struct socket *tun_get_socket(struct file *); struct ptr_ring *tun_get_tx_ring(struct file *file); bool tun_is_xdp_frame(void *ptr); -void *tun_xdp_to_ptr(void *ptr); -void *tun_ptr_to_xdp(void *ptr); +void *tun_xdp_to_ptr(struct xdp_frame *xdp); +struct xdp_frame *tun_ptr_to_xdp(void *ptr); void tun_ptr_free(void *ptr); #else #include @@ -48,11 +48,11 @@ static inline bool tun_is_xdp_frame(void *ptr) { return false; } -static inline void *tun_xdp_to_ptr(void *ptr) +static inline void *tun_xdp_to_ptr(struct xdp_frame *xdp) { return NULL; } -static inline void *tun_ptr_to_xdp(void *ptr) +static inline struct xdp_frame *tun_ptr_to_xdp(void *ptr) { return NULL; } -- cgit v1.2.3 From 596b5ef458f903d4362fb3c69967b6d8a23334bd Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Maciej=20=C5=BBenczykowski?= Date: Tue, 18 Aug 2020 18:07:10 -0700 Subject: net-tun: Eliminate two tun/xdp related function calls from vhost-net MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This provides a minor performance boost by virtue of inlining instead of cross module function calls. Test: builds Signed-off-by: Maciej Żenczykowski Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20200819010710.3959310-2-zenczykowski@gmail.com --- include/linux/if_tun.h | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h index 6c37e1dbc5df..2a7660843444 100644 --- a/include/linux/if_tun.h +++ b/include/linux/if_tun.h @@ -27,9 +27,18 @@ struct tun_xdp_hdr { #if defined(CONFIG_TUN) || defined(CONFIG_TUN_MODULE) struct socket *tun_get_socket(struct file *); struct ptr_ring *tun_get_tx_ring(struct file *file); -bool tun_is_xdp_frame(void *ptr); -void *tun_xdp_to_ptr(struct xdp_frame *xdp); -struct xdp_frame *tun_ptr_to_xdp(void *ptr); +static inline bool tun_is_xdp_frame(void *ptr) +{ + return (unsigned long)ptr & TUN_XDP_FLAG; +} +static inline void *tun_xdp_to_ptr(struct xdp_frame *xdp) +{ + return (void *)((unsigned long)xdp | TUN_XDP_FLAG); +} +static inline struct xdp_frame *tun_ptr_to_xdp(void *ptr) +{ + return (void *)((unsigned long)ptr & ~TUN_XDP_FLAG); +} void tun_ptr_free(void *ptr); #else #include -- cgit v1.2.3 From bdfbb63c314a6fb7d27dddd62f5a3e4f062b92bb Mon Sep 17 00:00:00 2001 From: Kurt Kanzenbach Date: Tue, 18 Aug 2020 12:32:43 +0200 Subject: ptp: Add generic ptp v2 header parsing function Reason: A lot of the ptp drivers - which implement hardware time stamping - need specific fields such as the sequence id from the ptp v2 header. Currently all drivers implement that themselves. Introduce a generic function to retrieve a pointer to the start of the ptp v2 header. Suggested-by: Russell King Signed-off-by: Kurt Kanzenbach Reviewed-by: Richard Cochran Reviewed-by: Florian Fainelli Reviewed-by: Russell King Signed-off-by: David S. Miller --- include/linux/ptp_classify.h | 44 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ptp_classify.h b/include/linux/ptp_classify.h index dd00fa41f7e7..0a9cc0eb0801 100644 --- a/include/linux/ptp_classify.h +++ b/include/linux/ptp_classify.h @@ -44,6 +44,30 @@ #define OFF_IHL 14 #define IPV4_HLEN(data) (((struct iphdr *)(data + OFF_IHL))->ihl << 2) +struct clock_identity { + u8 id[8]; +} __packed; + +struct port_identity { + struct clock_identity clock_identity; + __be16 port_number; +} __packed; + +struct ptp_header { + u8 tsmt; /* transportSpecific | messageType */ + u8 ver; /* reserved | versionPTP */ + __be16 message_length; + u8 domain_number; + u8 reserved1; + u8 flag_field[2]; + __be64 correction; + __be32 reserved2; + struct port_identity source_port_identity; + __be16 sequence_id; + u8 control; + u8 log_message_interval; +} __packed; + #if defined(CONFIG_NET_PTP_CLASSIFY) /** * ptp_classify_raw - classify a PTP packet @@ -57,6 +81,21 @@ */ unsigned int ptp_classify_raw(const struct sk_buff *skb); +/** + * ptp_parse_header - Get pointer to the PTP v2 header + * @skb: packet buffer + * @type: type of the packet (see ptp_classify_raw()) + * + * This function takes care of the VLAN, UDP, IPv4 and IPv6 headers. The length + * is checked. + * + * Note, internally skb_mac_header() is used. Make sure that the @skb is + * initialized accordingly. + * + * Return: Pointer to the ptp v2 header or NULL if not found + */ +struct ptp_header *ptp_parse_header(struct sk_buff *skb, unsigned int type); + void __init ptp_classifier_init(void); #else static inline void ptp_classifier_init(void) @@ -66,5 +105,10 @@ static inline unsigned int ptp_classify_raw(struct sk_buff *skb) { return PTP_CLASS_NONE; } +static inline struct ptp_header *ptp_parse_header(struct sk_buff *skb, + unsigned int type) +{ + return NULL; +} #endif #endif /* _PTP_CLASSIFY_H_ */ -- cgit v1.2.3 From 036c508ba95e573f53bd5bbb79b0c4d71003b319 Mon Sep 17 00:00:00 2001 From: Kurt Kanzenbach Date: Tue, 18 Aug 2020 12:32:44 +0200 Subject: ptp: Add generic ptp message type function The message type is located at different offsets within the ptp header depending on the ptp version (v1 or v2). Therefore, drivers which also deal with ptp v1 have some code for it. Extract this into a helper function for drivers to be used. Signed-off-by: Kurt Kanzenbach Reviewed-by: Richard Cochran Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- include/linux/ptp_classify.h | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ptp_classify.h b/include/linux/ptp_classify.h index 0a9cc0eb0801..cfc6d9152f69 100644 --- a/include/linux/ptp_classify.h +++ b/include/linux/ptp_classify.h @@ -96,6 +96,31 @@ unsigned int ptp_classify_raw(const struct sk_buff *skb); */ struct ptp_header *ptp_parse_header(struct sk_buff *skb, unsigned int type); +/** + * ptp_get_msgtype - Extract ptp message type from given header + * @hdr: ptp header + * @type: type of the packet (see ptp_classify_raw()) + * + * This function returns the message type for a given ptp header. It takes care + * of the different ptp header versions (v1 or v2). + * + * Return: The message type + */ +static inline u8 ptp_get_msgtype(const struct ptp_header *hdr, + unsigned int type) +{ + u8 msgtype; + + if (unlikely(type & PTP_CLASS_V1)) { + /* msg type is located at the control field for ptp v1 */ + msgtype = hdr->control; + } else { + msgtype = hdr->tsmt & 0x0f; + } + + return msgtype; +} + void __init ptp_classifier_init(void); #else static inline void ptp_classifier_init(void) -- cgit v1.2.3 From 17060fb5069f2c73a566015ce6e019d5685680b5 Mon Sep 17 00:00:00 2001 From: Kurt Kanzenbach Date: Tue, 18 Aug 2020 12:32:51 +0200 Subject: ptp: Remove unused macro The offset for the control field is not needed anymore. Remove it. Signed-off-by: Kurt Kanzenbach Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- include/linux/ptp_classify.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ptp_classify.h b/include/linux/ptp_classify.h index cfc6d9152f69..8437307cca8c 100644 --- a/include/linux/ptp_classify.h +++ b/include/linux/ptp_classify.h @@ -36,7 +36,6 @@ #define OFF_PTP_SOURCE_UUID 22 /* PTPv1 only */ #define OFF_PTP_SEQUENCE_ID 30 -#define OFF_PTP_CONTROL 32 /* PTPv1 only */ /* Below defines should actually be removed at some point in time. */ #define IP6_HLEN 40 -- cgit v1.2.3 From 005142b8a1f0f32d33fbe04b728464c1b7acfa0e Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Tue, 18 Aug 2020 21:27:56 -0700 Subject: bpf: Factor out bpf_link_by_id() helper. Refactor the code a bit to extract bpf_link_by_id() helper. It's similar to existing bpf_prog_by_id(). Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann Acked-by: Andrii Nakryiko Acked-by: Song Liu Link: https://lore.kernel.org/bpf/20200819042759.51280-2-alexei.starovoitov@gmail.com --- include/linux/bpf.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/bpf.h b/include/linux/bpf.h index 55f694b63164..a9b7185a6b37 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -1358,6 +1358,7 @@ int btf_check_type_match(struct bpf_verifier_env *env, struct bpf_prog *prog, struct btf *btf, const struct btf_type *t); struct bpf_prog *bpf_prog_by_id(u32 id); +struct bpf_link *bpf_link_by_id(u32 id); const struct bpf_func_proto *bpf_base_func_proto(enum bpf_func_id func_id); #else /* !CONFIG_BPF_SYSCALL */ -- cgit v1.2.3 From f67f6c00c7f367fe90f2bc01b9a977aa13de870e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 6 Aug 2020 20:20:46 +0200 Subject: ARM: s3c24xx: move s3cmci pinctrl handling into board files Rather than call the internal s3c_gpio_cfgall_range() function through a platform header, move the code into the set_power callback that is already exported by the board, and add a default implementation. In DT mode, the code already does not set the pin config, so nothing changes there. Signed-off-by: Arnd Bergmann Acked-by: Ulf Hansson Link: https://lore.kernel.org/r/20200806182059.2431-29-krzk@kernel.org [krzk: Rebase and correct set_power in mach-h1940.c] Signed-off-by: Krzysztof Kozlowski --- include/linux/platform_data/mmc-s3cmci.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/platform_data/mmc-s3cmci.h b/include/linux/platform_data/mmc-s3cmci.h index 33310b11cbdd..bacb86db3112 100644 --- a/include/linux/platform_data/mmc-s3cmci.h +++ b/include/linux/platform_data/mmc-s3cmci.h @@ -35,6 +35,7 @@ struct s3c24xx_mci_pdata { unsigned long ocr_avail; void (*set_power)(unsigned char power_mode, unsigned short vdd); + struct gpio_desc *bus[6]; }; /** @@ -44,6 +45,7 @@ struct s3c24xx_mci_pdata { * Copy the platform data supplied by @pdata so that this can be marked * __initdata. */ +extern void s3c24xx_mci_def_set_power(unsigned char power_mode, unsigned short vdd); extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata); #endif /* _ARCH_NCI_H */ -- cgit v1.2.3 From cd4bd8f9435ddf08a8677f56abf418423f223959 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 6 Aug 2020 20:20:48 +0200 Subject: ARM: s3c24xx: spi: avoid hardcoding fiq number in driver The IRQ_EINT0 constant is a platform detail that is defined in mach/irqs.h and not visible to drivers once that header is made private. Since the same calculation already happens in s3c24xx_set_fiq, just return the value from there. Signed-off-by: Arnd Bergmann Acked-by: Mark Brown Link: https://lore.kernel.org/r/20200806182059.2431-31-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski --- include/linux/spi/s3c24xx.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/spi/s3c24xx.h b/include/linux/spi/s3c24xx.h index c91d10b82f08..440a71593162 100644 --- a/include/linux/spi/s3c24xx.h +++ b/include/linux/spi/s3c24xx.h @@ -20,6 +20,6 @@ struct s3c2410_spi_info { void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); }; -extern int s3c24xx_set_fiq(unsigned int irq, bool on); +extern int s3c24xx_set_fiq(unsigned int irq, u32 *ack_ptr, bool on); #endif /* __LINUX_SPI_S3C24XX_H */ -- cgit v1.2.3 From 81994e0ffc373e67ace4c98797c35f8213f07753 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 2 Sep 2019 22:33:24 +0200 Subject: fbdev: s3c2410fb: remove mach header dependency The s3c2410fb driver is too deeply intertwined with the s3c24xx platform code. Change it in a way that avoids the use of platform header files but having all interface data in a platform_data header, and the private register definitions next to the driver itself. One ugly bit here is that the driver pokes directly into gpio registers, which are owned by another driver. Passing the mapped addresses in platform_data is somewhat suboptimal, but it is a small improvement over the previous version. Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20200806182059.2431-33-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski --- include/linux/platform_data/fb-s3c2410.h | 99 ++++++++++++++++++++++++++++++++ 1 file changed, 99 insertions(+) create mode 100644 include/linux/platform_data/fb-s3c2410.h (limited to 'include/linux') diff --git a/include/linux/platform_data/fb-s3c2410.h b/include/linux/platform_data/fb-s3c2410.h new file mode 100644 index 000000000000..10c11e6316d6 --- /dev/null +++ b/include/linux/platform_data/fb-s3c2410.h @@ -0,0 +1,99 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2004 Arnaud Patard + * + * Inspired by pxafb.h +*/ + +#ifndef __ASM_PLAT_FB_S3C2410_H +#define __ASM_PLAT_FB_S3C2410_H __FILE__ + +#include + +struct s3c2410fb_hw { + unsigned long lcdcon1; + unsigned long lcdcon2; + unsigned long lcdcon3; + unsigned long lcdcon4; + unsigned long lcdcon5; +}; + +/* LCD description */ +struct s3c2410fb_display { + /* LCD type */ + unsigned type; +#define S3C2410_LCDCON1_DSCAN4 (0<<5) +#define S3C2410_LCDCON1_STN4 (1<<5) +#define S3C2410_LCDCON1_STN8 (2<<5) +#define S3C2410_LCDCON1_TFT (3<<5) + +#define S3C2410_LCDCON1_TFT1BPP (8<<1) +#define S3C2410_LCDCON1_TFT2BPP (9<<1) +#define S3C2410_LCDCON1_TFT4BPP (10<<1) +#define S3C2410_LCDCON1_TFT8BPP (11<<1) +#define S3C2410_LCDCON1_TFT16BPP (12<<1) +#define S3C2410_LCDCON1_TFT24BPP (13<<1) + + /* Screen size */ + unsigned short width; + unsigned short height; + + /* Screen info */ + unsigned short xres; + unsigned short yres; + unsigned short bpp; + + unsigned pixclock; /* pixclock in picoseconds */ + unsigned short left_margin; /* value in pixels (TFT) or HCLKs (STN) */ + unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */ + unsigned short hsync_len; /* value in pixels (TFT) or HCLKs (STN) */ + unsigned short upper_margin; /* value in lines (TFT) or 0 (STN) */ + unsigned short lower_margin; /* value in lines (TFT) or 0 (STN) */ + unsigned short vsync_len; /* value in lines (TFT) or 0 (STN) */ + + /* lcd configuration registers */ + unsigned long lcdcon5; +#define S3C2410_LCDCON5_BPP24BL (1<<12) +#define S3C2410_LCDCON5_FRM565 (1<<11) +#define S3C2410_LCDCON5_INVVCLK (1<<10) +#define S3C2410_LCDCON5_INVVLINE (1<<9) +#define S3C2410_LCDCON5_INVVFRAME (1<<8) +#define S3C2410_LCDCON5_INVVD (1<<7) +#define S3C2410_LCDCON5_INVVDEN (1<<6) +#define S3C2410_LCDCON5_INVPWREN (1<<5) +#define S3C2410_LCDCON5_INVLEND (1<<4) +#define S3C2410_LCDCON5_PWREN (1<<3) +#define S3C2410_LCDCON5_ENLEND (1<<2) +#define S3C2410_LCDCON5_BSWP (1<<1) +#define S3C2410_LCDCON5_HWSWP (1<<0) +}; + +struct s3c2410fb_mach_info { + + struct s3c2410fb_display *displays; /* attached displays info */ + unsigned num_displays; /* number of defined displays */ + unsigned default_display; + + /* GPIOs */ + + unsigned long gpcup; + unsigned long gpcup_mask; + unsigned long gpccon; + unsigned long gpccon_mask; + unsigned long gpdup; + unsigned long gpdup_mask; + unsigned long gpdcon; + unsigned long gpdcon_mask; + + void __iomem * gpccon_reg; + void __iomem * gpcup_reg; + void __iomem * gpdcon_reg; + void __iomem * gpdup_reg; + + /* lpc3600 control register */ + unsigned long lpcsel; +}; + +extern void s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *); + +#endif /* __ASM_PLAT_FB_S3C2410_H */ -- cgit v1.2.3 From 81b11a6a09964cfea4c525d22548790a1d92d38f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 6 Aug 2020 20:20:52 +0200 Subject: ARM: s3c: remove cpufreq header dependencies The cpufreq drivers are split between the machine directory and the drivers/cpufreq directory. In order to share header files after we convert s3c to multiplatform, those headers have to live in a different global location. Move them to linux/soc/samsung/ in lack of a better place. Signed-off-by: Arnd Bergmann Acked-by: Viresh Kumar Link: https://lore.kernel.org/r/20200806182059.2431-35-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski --- include/linux/soc/samsung/s3c-cpu-freq.h | 145 +++++++++++++ include/linux/soc/samsung/s3c-cpufreq-core.h | 291 +++++++++++++++++++++++++++ include/linux/soc/samsung/s3c-pm.h | 10 + 3 files changed, 446 insertions(+) create mode 100644 include/linux/soc/samsung/s3c-cpu-freq.h create mode 100644 include/linux/soc/samsung/s3c-cpufreq-core.h (limited to 'include/linux') diff --git a/include/linux/soc/samsung/s3c-cpu-freq.h b/include/linux/soc/samsung/s3c-cpu-freq.h new file mode 100644 index 000000000000..63e88fd5dea2 --- /dev/null +++ b/include/linux/soc/samsung/s3c-cpu-freq.h @@ -0,0 +1,145 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2006-2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C CPU frequency scaling support - driver and board + */ +#ifndef __LINUX_SOC_SAMSUNG_S3C_CPU_FREQ_H +#define __LINUX_SOC_SAMSUNG_S3C_CPU_FREQ_H + +#include + +struct s3c_cpufreq_info; +struct s3c_cpufreq_board; +struct s3c_iotimings; + +/** + * struct s3c_freq - frequency information (mainly for core drivers) + * @fclk: The FCLK frequency in Hz. + * @armclk: The ARMCLK frequency in Hz. + * @hclk_tns: HCLK cycle time in 10ths of nano-seconds. + * @hclk: The HCLK frequency in Hz. + * @pclk: The PCLK frequency in Hz. + * + * This contains the frequency information about the current configuration + * mainly for the core drivers to ensure we do not end up passing about + * a large number of parameters. + * + * The @hclk_tns field is a useful cache for the parts of the drivers that + * need to calculate IO timings and suchlike. + */ +struct s3c_freq { + unsigned long fclk; + unsigned long armclk; + unsigned long hclk_tns; /* in 10ths of ns */ + unsigned long hclk; + unsigned long pclk; +}; + +/** + * struct s3c_cpufreq_freqs - s3c cpufreq notification information. + * @freqs: The cpufreq setting information. + * @old: The old clock settings. + * @new: The new clock settings. + * @pll_changing: Set if the PLL is changing. + * + * Wrapper 'struct cpufreq_freqs' so that any drivers receiving the + * notification can use this information that is not provided by just + * having the core frequency alone. + * + * The pll_changing flag is used to indicate if the PLL itself is + * being set during this change. This is important as the clocks + * will temporarily be set to the XTAL clock during this time, so + * drivers may want to close down their output during this time. + * + * Note, this is not being used by any current drivers and therefore + * may be removed in the future. + */ +struct s3c_cpufreq_freqs { + struct cpufreq_freqs freqs; + struct s3c_freq old; + struct s3c_freq new; + + unsigned int pll_changing:1; +}; + +#define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs) + +/** + * struct s3c_clkdivs - clock divisor information + * @p_divisor: Divisor from FCLK to PCLK. + * @h_divisor: Divisor from FCLK to HCLK. + * @arm_divisor: Divisor from FCLK to ARMCLK (not all CPUs). + * @dvs: Non-zero if using DVS mode for ARMCLK. + * + * Divisor settings for the core clocks. + */ +struct s3c_clkdivs { + int p_divisor; + int h_divisor; + int arm_divisor; + unsigned char dvs; +}; + +#define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s)) + +/** + * struct s3c_pllval - PLL value entry. + * @freq: The frequency for this entry in Hz. + * @pll_reg: The PLL register setting for this PLL value. + */ +struct s3c_pllval { + unsigned long freq; + unsigned long pll_reg; +}; + +/** + * struct s3c_cpufreq_board - per-board cpu frequency informatin + * @refresh: The SDRAM refresh period in nanoseconds. + * @auto_io: Set if the IO timing settings should be generated from the + * initialisation time hardware registers. + * @need_io: Set if the board has external IO on any of the chipselect + * lines that will require the hardware timing registers to be + * updated on a clock change. + * @max: The maxium frequency limits for the system. Any field that + * is left at zero will use the CPU's settings. + * + * This contains the board specific settings that affect how the CPU + * drivers chose settings. These include the memory refresh and IO + * timing information. + * + * Registration depends on the driver being used, the ARMCLK only + * implementation does not currently need this but the older style + * driver requires this to be available. + */ +struct s3c_cpufreq_board { + unsigned int refresh; + unsigned int auto_io:1; /* automatically init io timings. */ + unsigned int need_io:1; /* set if needs io timing support. */ + + /* any non-zero field in here is taken as an upper limit. */ + struct s3c_freq max; /* frequency limits */ +}; + +/* Things depending on frequency scaling. */ +#ifdef CONFIG_ARM_S3C_CPUFREQ +#define __init_or_cpufreq +#else +#define __init_or_cpufreq __init +#endif + +/* Board functions */ + +#ifdef CONFIG_ARM_S3C_CPUFREQ +extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board); +#else + +static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board) +{ + return 0; +} +#endif /* CONFIG_ARM_S3C_CPUFREQ */ + +#endif diff --git a/include/linux/soc/samsung/s3c-cpufreq-core.h b/include/linux/soc/samsung/s3c-cpufreq-core.h new file mode 100644 index 000000000000..c578b07ccd5d --- /dev/null +++ b/include/linux/soc/samsung/s3c-cpufreq-core.h @@ -0,0 +1,291 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2006-2009 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C CPU frequency scaling support - core support + */ +#ifndef __LINUX_SOC_SAMSUNG_S3C_CPUFREQ_CORE_H +#define __LINUX_SOC_SAMSUNG_S3C_CPUFREQ_CORE_H + +#include + +struct seq_file; + +#define MAX_BANKS (8) +#define S3C2412_MAX_IO (8) + +/** + * struct s3c2410_iobank_timing - IO bank timings for S3C2410 style timings + * @bankcon: The cached version of settings in this structure. + * @tacp: + * @tacs: Time from address valid to nCS asserted. + * @tcos: Time from nCS asserted to nOE or nWE asserted. + * @tacc: Time that nOE or nWE is asserted. + * @tcoh: Time nCS is held after nOE or nWE are released. + * @tcah: Time address is held for after + * @nwait_en: Whether nWAIT is enabled for this bank. + * + * This structure represents the IO timings for a S3C2410 style IO bank + * used by the CPU frequency support if it needs to change the settings + * of the IO. + */ +struct s3c2410_iobank_timing { + unsigned long bankcon; + unsigned int tacp; + unsigned int tacs; + unsigned int tcos; + unsigned int tacc; + unsigned int tcoh; /* nCS hold after nOE/nWE */ + unsigned int tcah; /* Address hold after nCS */ + unsigned char nwait_en; /* nWait enabled for bank. */ +}; + +/** + * struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO + * @idcy: The idle cycle time between transactions. + * @wstrd: nCS release to end of read cycle. + * @wstwr: nCS release to end of write cycle. + * @wstoen: nCS assertion to nOE assertion time. + * @wstwen: nCS assertion to nWE assertion time. + * @wstbrd: Burst ready delay. + * @smbidcyr: Register cache for smbidcyr value. + * @smbwstrd: Register cache for smbwstrd value. + * @smbwstwr: Register cache for smbwstwr value. + * @smbwstoen: Register cache for smbwstoen value. + * @smbwstwen: Register cache for smbwstwen value. + * @smbwstbrd: Register cache for smbwstbrd value. + * + * Timing information for a IO bank on an S3C2412 or similar system which + * uses a PL093 block. + */ +struct s3c2412_iobank_timing { + unsigned int idcy; + unsigned int wstrd; + unsigned int wstwr; + unsigned int wstoen; + unsigned int wstwen; + unsigned int wstbrd; + + /* register cache */ + unsigned char smbidcyr; + unsigned char smbwstrd; + unsigned char smbwstwr; + unsigned char smbwstoen; + unsigned char smbwstwen; + unsigned char smbwstbrd; +}; + +union s3c_iobank { + struct s3c2410_iobank_timing *io_2410; + struct s3c2412_iobank_timing *io_2412; +}; + +/** + * struct s3c_iotimings - Chip IO timings holder + * @bank: The timings for each IO bank. + */ +struct s3c_iotimings { + union s3c_iobank bank[MAX_BANKS]; +}; + +/** + * struct s3c_plltab - PLL table information. + * @vals: List of PLL values. + * @size: Size of the PLL table @vals. + */ +struct s3c_plltab { + struct s3c_pllval *vals; + int size; +}; + +/** + * struct s3c_cpufreq_config - current cpu frequency configuration + * @freq: The current settings for the core clocks. + * @max: Maxium settings, derived from core, board and user settings. + * @pll: The PLL table entry for the current PLL settings. + * @divs: The divisor settings for the core clocks. + * @info: The current core driver information. + * @board: The information for the board we are running on. + * @lock_pll: Set if the PLL settings cannot be changed. + * + * This is for the core drivers that need to know information about + * the current settings and values. It should not be needed by any + * device drivers. +*/ +struct s3c_cpufreq_config { + struct s3c_freq freq; + struct s3c_freq max; + struct clk *mpll; + struct cpufreq_frequency_table pll; + struct s3c_clkdivs divs; + struct s3c_cpufreq_info *info; /* for core, not drivers */ + struct s3c_cpufreq_board *board; + + unsigned int lock_pll:1; +}; + +/** + * struct s3c_cpufreq_info - Information for the CPU frequency driver. + * @name: The name of this implementation. + * @max: The maximum frequencies for the system. + * @latency: Transition latency to give to cpufreq. + * @locktime_m: The lock-time in uS for the MPLL. + * @locktime_u: The lock-time in uS for the UPLL. + * @locttime_bits: The number of bits each LOCKTIME field. + * @need_pll: Set if this driver needs to change the PLL values to achieve + * any frequency changes. This is really only need by devices like the + * S3C2410 where there is no or limited divider between the PLL and the + * ARMCLK. + * @get_iotiming: Get the current IO timing data, mainly for use at start. + * @set_iotiming: Update the IO timings from the cached copies calculated + * from the @calc_iotiming entry when changing the frequency. + * @calc_iotiming: Calculate and update the cached copies of the IO timings + * from the newly calculated frequencies. + * @calc_freqtable: Calculate (fill in) the given frequency table from the + * current frequency configuration. If the table passed in is NULL, + * then the return is the number of elements to be filled for allocation + * of the table. + * @set_refresh: Set the memory refresh configuration. + * @set_fvco: Set the PLL frequencies. + * @set_divs: Update the clock divisors. + * @calc_divs: Calculate the clock divisors. + */ +struct s3c_cpufreq_info { + const char *name; + struct s3c_freq max; + + unsigned int latency; + + unsigned int locktime_m; + unsigned int locktime_u; + unsigned char locktime_bits; + + unsigned int need_pll:1; + + /* driver routines */ + + int (*get_iotiming)(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings); + + void (*set_iotiming)(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings); + + int (*calc_iotiming)(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings); + + int (*calc_freqtable)(struct s3c_cpufreq_config *cfg, + struct cpufreq_frequency_table *t, + size_t table_size); + + void (*debug_io_show)(struct seq_file *seq, + struct s3c_cpufreq_config *cfg, + union s3c_iobank *iob); + + void (*set_refresh)(struct s3c_cpufreq_config *cfg); + void (*set_fvco)(struct s3c_cpufreq_config *cfg); + void (*set_divs)(struct s3c_cpufreq_config *cfg); + int (*calc_divs)(struct s3c_cpufreq_config *cfg); +}; + +extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info); + +extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, + unsigned int plls_no); + +/* exports and utilities for debugfs */ +extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void); +extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void); + +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS +#define s3c_cpufreq_debugfs_call(x) x +#else +#define s3c_cpufreq_debugfs_call(x) NULL +#endif + +/* Useful utility functions. */ + +extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *); + +/* S3C2410 and compatible exported functions */ + +extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg); +extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg); + +#ifdef CONFIG_S3C2410_IOTIMING +extern void s3c2410_iotiming_debugfs(struct seq_file *seq, + struct s3c_cpufreq_config *cfg, + union s3c_iobank *iob); + +extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot); + +extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings); + +extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot); +#else +#define s3c2410_iotiming_debugfs NULL +#define s3c2410_iotiming_calc NULL +#define s3c2410_iotiming_get NULL +#define s3c2410_iotiming_set NULL +#endif /* CONFIG_S3C2410_IOTIMING */ + +/* S3C2412 compatible routines */ + +#ifdef CONFIG_S3C2412_IOTIMING +extern void s3c2412_iotiming_debugfs(struct seq_file *seq, + struct s3c_cpufreq_config *cfg, + union s3c_iobank *iob); + +extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings); + +extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot); + +extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot); +#else +#define s3c2412_iotiming_debugfs NULL +#define s3c2412_iotiming_calc NULL +#define s3c2412_iotiming_get NULL +#define s3c2412_iotiming_set NULL +#endif /* CONFIG_S3C2412_IOTIMING */ + +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG +#define s3c_freq_dbg(x...) printk(KERN_INFO x) +#else +#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0) +#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG */ + +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG +#define s3c_freq_iodbg(x...) printk(KERN_INFO x) +#else +#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0) +#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG */ + +static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table, + int index, size_t table_size, + unsigned int freq) +{ + if (index < 0) + return index; + + if (table) { + if (index >= table_size) + return -ENOMEM; + + s3c_freq_dbg("%s: { %d = %u kHz }\n", + __func__, index, freq); + + table[index].driver_data = index; + table[index].frequency = freq; + } + + return index + 1; +} + +#endif diff --git a/include/linux/soc/samsung/s3c-pm.h b/include/linux/soc/samsung/s3c-pm.h index 730bd1d3d09a..f9164559c99f 100644 --- a/include/linux/soc/samsung/s3c-pm.h +++ b/include/linux/soc/samsung/s3c-pm.h @@ -81,4 +81,14 @@ extern void s3c_pm_check_store(void); #define s3c_pm_check_store() do { } while (0) #endif +/* system device subsystems */ + +extern struct bus_type s3c2410_subsys; +extern struct bus_type s3c2410a_subsys; +extern struct bus_type s3c2412_subsys; +extern struct bus_type s3c2416_subsys; +extern struct bus_type s3c2440_subsys; +extern struct bus_type s3c2442_subsys; +extern struct bus_type s3c2443_subsys; + #endif -- cgit v1.2.3 From 44c01f5ce1c7518886a87d5522528e30e0b4d9f8 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 6 Aug 2020 20:20:53 +0200 Subject: cpufreq: s3c2412: use global s3c2412_cpufreq_setrefresh There are two identical copies of the s3c2412_cpufreq_setrefresh function: a static one in the cpufreq driver and a global version in iotiming-s3c2412.c. As the function requires the use of a hardcoded register address from a header that we want to not be visible to drivers, just move the existing global function and add a declaration in one of the cpufreq header files. Signed-off-by: Arnd Bergmann Acked-by: Viresh Kumar Link: https://lore.kernel.org/r/20200806182059.2431-36-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski --- include/linux/soc/samsung/s3c-cpufreq-core.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/soc/samsung/s3c-cpufreq-core.h b/include/linux/soc/samsung/s3c-cpufreq-core.h index c578b07ccd5d..e0c7217a0f53 100644 --- a/include/linux/soc/samsung/s3c-cpufreq-core.h +++ b/include/linux/soc/samsung/s3c-cpufreq-core.h @@ -248,6 +248,7 @@ extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg, extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg, struct s3c_iotimings *iot); +extern void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg); #else #define s3c2412_iotiming_debugfs NULL #define s3c2412_iotiming_calc NULL -- cgit v1.2.3 From c38758e3d574380ccfa583793be14c1cc8a322ff Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 6 Aug 2020 20:20:54 +0200 Subject: cpufreq: s3c24xx: move low-level clk reg access into platform code Rather than have the cpufreq drivers touch include the common headers to get the constants, add a small indirection. This is still not the proper way that would do this through the common clk API, but it lets us kill off the header file usage. Signed-off-by: Arnd Bergmann Acked-by: Viresh Kumar Link: https://lore.kernel.org/r/20200806182059.2431-37-krzk@kernel.org [krzk: Rebase and fix -Wold-style-definition] Signed-off-by: Krzysztof Kozlowski --- include/linux/soc/samsung/s3c-cpufreq-core.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/soc/samsung/s3c-cpufreq-core.h b/include/linux/soc/samsung/s3c-cpufreq-core.h index e0c7217a0f53..3b278afb769b 100644 --- a/include/linux/soc/samsung/s3c-cpufreq-core.h +++ b/include/linux/soc/samsung/s3c-cpufreq-core.h @@ -289,4 +289,11 @@ static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table, return index + 1; } +u32 s3c2440_read_camdivn(void); +void s3c2440_write_camdivn(u32 camdiv); +u32 s3c24xx_read_clkdivn(void); +void s3c24xx_write_clkdivn(u32 clkdiv); +u32 s3c24xx_read_mpllcon(void); +void s3c24xx_write_locktime(u32 locktime); + #endif -- cgit v1.2.3 From ba171d3f0850003216fd1a85190d17b1feddb961 Mon Sep 17 00:00:00 2001 From: Cedric Neveux Date: Mon, 4 Mar 2019 08:54:23 +0100 Subject: driver: tee: Handle NULL pointer indication from client TEE Client introduce a new capability "TEE_GEN_CAP_MEMREF_NULL" to handle the support of the shared memory buffer with a NULL pointer. This capability depends on TEE Capabilities and driver support. Driver and TEE exchange capabilities at driver initialization. Signed-off-by: Michael Whitfield Signed-off-by: Cedric Neveux Reviewed-by: Joakim Bech Tested-by: Joakim Bech (QEMU) Signed-off-by: Jens Wiklander --- include/linux/tee_drv.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/tee_drv.h b/include/linux/tee_drv.h index d074302989dd..cdd049a724b1 100644 --- a/include/linux/tee_drv.h +++ b/include/linux/tee_drv.h @@ -47,6 +47,8 @@ struct tee_shm_pool; * and just return with an error code. It is needed for requests * that arises from TEE based kernel drivers that should be * non-blocking in nature. + * @cap_memref_null: flag indicating if the TEE Client support shared + * memory buffer with a NULL pointer. */ struct tee_context { struct tee_device *teedev; @@ -54,6 +56,7 @@ struct tee_context { struct kref refcount; bool releasing; bool supp_nowait; + bool cap_memref_null; }; struct tee_param_memref { -- cgit v1.2.3 From 6b0a249a301e2af9adda84adbced3a2988248b95 Mon Sep 17 00:00:00 2001 From: Yonghong Song Date: Fri, 21 Aug 2020 11:44:18 -0700 Subject: bpf: Implement link_query for bpf iterators This patch implemented bpf_link callback functions show_fdinfo and fill_link_info to support link_query interface. The general interface for show_fdinfo and fill_link_info will print/fill the target_name. Each targets can register show_fdinfo and fill_link_info callbacks to print/fill more target specific information. For example, the below is a fdinfo result for a bpf task iterator. $ cat /proc/1749/fdinfo/7 pos: 0 flags: 02000000 mnt_id: 14 link_type: iter link_id: 11 prog_tag: 990e1f8152f7e54f prog_id: 59 target_name: task Signed-off-by: Yonghong Song Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20200821184418.574122-1-yhs@fb.com --- include/linux/bpf.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bpf.h b/include/linux/bpf.h index a9b7185a6b37..529e9b183eeb 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -1218,12 +1218,18 @@ typedef int (*bpf_iter_attach_target_t)(struct bpf_prog *prog, union bpf_iter_link_info *linfo, struct bpf_iter_aux_info *aux); typedef void (*bpf_iter_detach_target_t)(struct bpf_iter_aux_info *aux); +typedef void (*bpf_iter_show_fdinfo_t) (const struct bpf_iter_aux_info *aux, + struct seq_file *seq); +typedef int (*bpf_iter_fill_link_info_t)(const struct bpf_iter_aux_info *aux, + struct bpf_link_info *info); #define BPF_ITER_CTX_ARG_MAX 2 struct bpf_iter_reg { const char *target; bpf_iter_attach_target_t attach_target; bpf_iter_detach_target_t detach_target; + bpf_iter_show_fdinfo_t show_fdinfo; + bpf_iter_fill_link_info_t fill_link_info; u32 ctx_arg_info_size; struct bpf_ctx_arg_aux ctx_arg_info[BPF_ITER_CTX_ARG_MAX]; const struct bpf_iter_seq_info *seq_info; -- cgit v1.2.3 From b76f22269028fb252727a696084c70494d80a52c Mon Sep 17 00:00:00 2001 From: Yonghong Song Date: Fri, 21 Aug 2020 11:44:19 -0700 Subject: bpf: Implement link_query callbacks in map element iterators For bpf_map_elem and bpf_sk_local_storage bpf iterators, additional map_id should be shown for fdinfo and userspace query. For example, the following is for a bpf_map_elem iterator. $ cat /proc/1753/fdinfo/9 pos: 0 flags: 02000000 mnt_id: 14 link_type: iter link_id: 34 prog_tag: 104be6d3fe45e6aa prog_id: 173 target_name: bpf_map_elem map_id: 127 Signed-off-by: Yonghong Song Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20200821184419.574240-1-yhs@fb.com --- include/linux/bpf.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bpf.h b/include/linux/bpf.h index 529e9b183eeb..30c144af894a 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -1256,6 +1256,10 @@ int bpf_iter_new_fd(struct bpf_link *link); bool bpf_link_is_iter(struct bpf_link *link); struct bpf_prog *bpf_iter_get_info(struct bpf_iter_meta *meta, bool in_stop); int bpf_iter_run_prog(struct bpf_prog *prog, void *ctx); +void bpf_iter_map_show_fdinfo(const struct bpf_iter_aux_info *aux, + struct seq_file *seq); +int bpf_iter_map_fill_link_info(const struct bpf_iter_aux_info *aux, + struct bpf_link_info *info); int bpf_percpu_hash_copy(struct bpf_map *map, void *key, void *value); int bpf_percpu_array_copy(struct bpf_map *map, void *key, void *value); -- cgit v1.2.3 From 7b219da43f94a3b4d5a8aa4cc52b75b34f0301ec Mon Sep 17 00:00:00 2001 From: Lorenz Bauer Date: Fri, 21 Aug 2020 11:29:43 +0100 Subject: net: sk_msg: Simplify sk_psock initialization Initializing psock->sk_proto and other saved callbacks is only done in sk_psock_update_proto, after sk_psock_init has returned. The logic for this is difficult to follow, and needlessly complex. Instead, initialize psock->sk_proto whenever we allocate a new psock. Additionally, assert the following invariants: * The SK has no ULP: ULP does it's own finagling of sk->sk_prot * sk_user_data is unused: we need it to store sk_psock Protect our access to sk_user_data with sk_callback_lock, which is what other users like reuseport arrays, etc. do. The result is that an sk_psock is always fully initialized, and that psock->sk_proto is always the "original" struct proto. The latter allows us to use psock->sk_proto when initializing IPv6 TCP / UDP callbacks for sockmap. Signed-off-by: Lorenz Bauer Signed-off-by: Alexei Starovoitov Acked-by: John Fastabend Link: https://lore.kernel.org/bpf/20200821102948.21918-2-lmb@cloudflare.com --- include/linux/skmsg.h | 17 ----------------- 1 file changed, 17 deletions(-) (limited to 'include/linux') diff --git a/include/linux/skmsg.h b/include/linux/skmsg.h index 1e9ed840b9fc..3119928fc103 100644 --- a/include/linux/skmsg.h +++ b/include/linux/skmsg.h @@ -340,23 +340,6 @@ static inline void sk_psock_update_proto(struct sock *sk, struct sk_psock *psock, struct proto *ops) { - /* Initialize saved callbacks and original proto only once, since this - * function may be called multiple times for a psock, e.g. when - * psock->progs.msg_parser is updated. - * - * Since we've not installed the new proto, psock is not yet in use and - * we can initialize it without synchronization. - */ - if (!psock->sk_proto) { - struct proto *orig = READ_ONCE(sk->sk_prot); - - psock->saved_unhash = orig->unhash; - psock->saved_close = orig->close; - psock->saved_write_space = sk->sk_write_space; - - psock->sk_proto = orig; - } - /* Pairs with lockless read in sk_clone_lock() */ WRITE_ONCE(sk->sk_prot, ops); } -- cgit v1.2.3 From 13b79d3ffbb8add9e2a6d604db2b49f241b97303 Mon Sep 17 00:00:00 2001 From: Lorenz Bauer Date: Fri, 21 Aug 2020 11:29:45 +0100 Subject: bpf: sockmap: Call sock_map_update_elem directly Don't go via map->ops to call sock_map_update_elem, since we know what function to call in bpf_map_update_value. Since we currently don't allow calling map_update_elem from BPF context, we can remove ops->map_update_elem and rename the function to sock_map_update_elem_sys. Signed-off-by: Lorenz Bauer Signed-off-by: Alexei Starovoitov Acked-by: Yonghong Song Acked-by: John Fastabend Link: https://lore.kernel.org/bpf/20200821102948.21918-4-lmb@cloudflare.com --- include/linux/bpf.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bpf.h b/include/linux/bpf.h index 30c144af894a..81f38e2fda78 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -1648,6 +1648,7 @@ int sock_map_prog_update(struct bpf_map *map, struct bpf_prog *prog, struct bpf_prog *old, u32 which); int sock_map_get_from_fd(const union bpf_attr *attr, struct bpf_prog *prog); int sock_map_prog_detach(const union bpf_attr *attr, enum bpf_prog_type ptype); +int sock_map_update_elem_sys(struct bpf_map *map, void *key, void *value, u64 flags); void sock_map_unhash(struct sock *sk); void sock_map_close(struct sock *sk, long timeout); #else @@ -1669,6 +1670,12 @@ static inline int sock_map_prog_detach(const union bpf_attr *attr, { return -EOPNOTSUPP; } + +static inline int sock_map_update_elem_sys(struct bpf_map *map, void *key, void *value, + u64 flags) +{ + return -EOPNOTSUPP; +} #endif /* CONFIG_BPF_STREAM_PARSER */ #if defined(CONFIG_INET) && defined(CONFIG_BPF_SYSCALL) -- cgit v1.2.3 From 2152fbbd47c06c4f50ad265ec1b0c43673bee3e8 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 3 Jul 2020 09:07:29 -0700 Subject: soc: ti: pm33xx: Simplify RTC usage to prepare to drop platform data We must re-enable the RTC module clock enabled in RTC+DDR suspend, and pm33xx has been using platform data callbacks for that. Looks like for retention suspend the RTC module clock must not be re-enabled. To remove the legacy platform data callbacks, and eventually be able to drop the RTC legacy platform data, let's manage the RTC module clock and register range directly in pm33xx. Acked-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- include/linux/platform_data/pm33xx.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/platform_data/pm33xx.h b/include/linux/platform_data/pm33xx.h index 644af1d89cfa..7037ba7a53ca 100644 --- a/include/linux/platform_data/pm33xx.h +++ b/include/linux/platform_data/pm33xx.h @@ -54,11 +54,8 @@ struct am33xx_pm_platform_data { void (*begin_suspend)(void); void (*finish_suspend)(void); struct am33xx_pm_sram_addr *(*get_sram_addrs)(void); - void __iomem *(*get_rtc_base_addr)(void); void (*save_context)(void); void (*restore_context)(void); - void (*prepare_rtc_suspend)(void); - void (*prepare_rtc_resume)(void); int (*check_off_mode_enable)(void); }; -- cgit v1.2.3 From 70a217f1976f75a6cfe8223e5669ad7b405daaad Mon Sep 17 00:00:00 2001 From: Martin KaFai Lau Date: Thu, 20 Aug 2020 12:00:14 -0700 Subject: tcp: Use a struct to represent a saved_syn The TCP_SAVE_SYN has both the network header and tcp header. The total length of the saved syn packet is currently stored in the first 4 bytes (u32) of an array and the actual packet data is stored after that. A later patch will add a bpf helper that allows to get the tcp header alone from the saved syn without the network header. It will be more convenient to have a direct offset to a specific header instead of re-parsing it. This requires to separately store the network hdrlen. The total header length (i.e. network + tcp) is still needed for the current usage in getsockopt. Although this total length can be obtained by looking into the tcphdr and then get the (th->doff << 2), this patch chooses to directly store the tcp hdrlen in the second four bytes of this newly created "struct saved_syn". By using a new struct, it can give a readable name to each individual header length. Signed-off-by: Martin KaFai Lau Signed-off-by: Alexei Starovoitov Reviewed-by: Eric Dumazet Acked-by: John Fastabend Link: https://lore.kernel.org/bpf/20200820190014.2883694-1-kafai@fb.com ---