From 08a33805518e7845486f88287e8aace6f8439391 Mon Sep 17 00:00:00 2001 From: Alison Schofield Date: Wed, 9 Mar 2016 11:30:12 -0800 Subject: iio: core: implement iio_device_{claim|release}_direct_mode() It is often the case that the driver wants to be sure a device stays in direct mode while it is executing a task or series of tasks. To accomplish this today, the driver performs this sequence: 1) take the device state lock, 2) verify it is not in a buffered mode, 3) execute some tasks, and 4) release that lock. This patch introduces a pair of helper functions that simplify these steps and make it more semantically expressive. iio_device_claim_direct_mode() If the device is not in any buffered mode it is guaranteed to stay that way until iio_release_direct_mode() is called. iio_device_release_direct_mode() Release the claim. Device is no longer guaranteed to stay in direct mode. Signed-off-by: Alison Schofield Signed-off-by: Jonathan Cameron --- include/linux/iio/iio.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index b2b16772c651..0b2773ada0ba 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -527,6 +527,8 @@ void iio_device_unregister(struct iio_dev *indio_dev); int devm_iio_device_register(struct device *dev, struct iio_dev *indio_dev); void devm_iio_device_unregister(struct device *dev, struct iio_dev *indio_dev); int iio_push_event(struct iio_dev *indio_dev, u64 ev_code, s64 timestamp); +int iio_device_claim_direct_mode(struct iio_dev *indio_dev); +void iio_device_release_direct_mode(struct iio_dev *indio_dev); extern struct bus_type iio_bus_type; -- cgit v1.2.3 From 49db08c358873af11ba3c25401de88156fa5d365 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 19 Feb 2016 15:36:07 +0100 Subject: chrdev: emit a warning when we go below dynamic major range Currently a dynamically allocated character device major is taken from 254 and downward. This mechanism is used for RTC, IIO and a few other subsystems. The kernel currently has no check prevening these dynamic allocations from eating into the assigned numbers at 233 and downward. In a recent test it was reported that so many dynamic device majors were used on a test server, that the major number for infiniband (231) was stolen. This occurred when allocating a new major number for GPIO chips. The error messages from the kernel were not helpful. (See: https://lkml.org/lkml/2016/2/14/124) This patch adds a defined lower limit of the dynamic major allocation region will henceforth emit a warning if we start to eat into the assigned numbers. It does not do any semantic changes and will not change the kernels behaviour: numbers will still continue to be stolen, but we will know from dmesg what is going on. This also updates the Documentation/devices.txt to clearly reflect that we are using this range of major numbers for dynamic allocation. Reported-by: Ying Huang Cc: Linus Torvalds Cc: Greg Kroah-Hartman Cc: Alan Cox Cc: Arnd Bergmann Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman --- include/linux/fs.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 14a97194b34b..60082be96de8 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2385,6 +2385,8 @@ static inline void bd_unlink_disk_holder(struct block_device *bdev, /* fs/char_dev.c */ #define CHRDEV_MAJOR_HASH_SIZE 255 +/* Marks the bottom of the first segment of free char majors */ +#define CHRDEV_MAJOR_DYN_END 234 extern int alloc_chrdev_region(dev_t *, unsigned, unsigned, const char *); extern int register_chrdev_region(dev_t, unsigned, const char *); extern int __register_chrdev(unsigned int major, unsigned int baseminor, -- cgit v1.2.3 From b3c1be1b789cca6d3e39c950dfed690f0511fe76 Mon Sep 17 00:00:00 2001 From: William Breathitt Gray Date: Fri, 22 Jan 2016 11:28:07 -0500 Subject: base: isa: Remove X86_32 dependency Many motherboards utilize a LPC to ISA bridge in order to decode ISA-style port-mapped I/O addresses. This is particularly true for embedded motherboards supporting the PC/104 bus (a bus specification derived from ISA). These motherboards are now commonly running 64-bit x86 processors. The X86_32 dependency should be removed from the ISA bus configuration option in order to support these newer motherboards. A new config option, CONFIG_ISA_BUS, is introduced to allow for the compilation of the ISA bus driver independent of the CONFIG_ISA option. Devices which communicate via ISA-compatible buses can now be supported independent of the dependencies of the CONFIG_ISA option. Signed-off-by: William Breathitt Gray Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman --- include/linux/isa.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/isa.h b/include/linux/isa.h index b0270e3814c8..2a02862775eb 100644 --- a/include/linux/isa.h +++ b/include/linux/isa.h @@ -22,7 +22,7 @@ struct isa_driver { #define to_isa_driver(x) container_of((x), struct isa_driver, driver) -#ifdef CONFIG_ISA +#ifdef CONFIG_ISA_BUS int isa_register_driver(struct isa_driver *, unsigned int); void isa_unregister_driver(struct isa_driver *); #else -- cgit v1.2.3 From f235541699bcf14fb8be797c6bc1d7106df0eb64 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Fri, 22 Jan 2016 01:32:26 -0500 Subject: export.h: allow for per-symbol configurable EXPORT_SYMBOL() Similar to include/generated/autoconf.h, include/generated/autoksyms.h will contain a list of defines for each EXPORT_SYMBOL() that we want active. The format is: #define __KSYM_ 1 This list will be auto-generated with another patch. For now we only include the preprocessor magic to automatically create or omit the corresponding struct kernel_symbol declaration. Given the content of include/generated/autoksyms.h may not be known in advance, an empty file is created early on to let the build proceed. Signed-off-by: Nicolas Pitre Acked-by: Rusty Russell --- include/linux/export.h | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/export.h b/include/linux/export.h index 96e45ea463e7..77afdb2a2506 100644 --- a/include/linux/export.h +++ b/include/linux/export.h @@ -38,7 +38,7 @@ extern struct module __this_module; #ifdef CONFIG_MODULES -#ifndef __GENKSYMS__ +#if defined(__KERNEL__) && !defined(__GENKSYMS__) #ifdef CONFIG_MODVERSIONS /* Mark the CRC weak since genksyms apparently decides not to * generate a checksums for some symbols */ @@ -53,7 +53,7 @@ extern struct module __this_module; #endif /* For every exported symbol, place a struct in the __ksymtab section */ -#define __EXPORT_SYMBOL(sym, sec) \ +#define ___EXPORT_SYMBOL(sym, sec) \ extern typeof(sym) sym; \ __CRC_SYMBOL(sym, sec) \ static const char __kstrtab_##sym[] \ @@ -65,6 +65,24 @@ extern struct module __this_module; __attribute__((section("___ksymtab" sec "+" #sym), unused)) \ = { (unsigned long)&sym, __kstrtab_##sym } +#ifdef CONFIG_TRIM_UNUSED_KSYMS + +#include +#include + +#define __EXPORT_SYMBOL(sym, sec) \ + __cond_export_sym(sym, sec, config_enabled(__KSYM_##sym)) +#define __cond_export_sym(sym, sec, conf) \ + ___cond_export_sym(sym, sec, conf) +#define ___cond_export_sym(sym, sec, enabled) \ + __cond_export_sym_##enabled(sym, sec) +#define __cond_export_sym_1(sym, sec) ___EXPORT_SYMBOL(sym, sec) +#define __cond_export_sym_0(sym, sec) /* nothing */ + +#else +#define __EXPORT_SYMBOL ___EXPORT_SYMBOL +#endif + #define EXPORT_SYMBOL(sym) \ __EXPORT_SYMBOL(sym, "") -- cgit v1.2.3 From c1a95fda2a40ae8c7aad3fa44fa7718a3710eb2d Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Fri, 22 Jan 2016 13:41:57 -0500 Subject: kbuild: add fine grained build dependencies for exported symbols Like with kconfig options, we now have the ability to compile in and out individual EXPORT_SYMBOL() declarations based on the content of include/generated/autoksyms.h. However we don't want the entire world to be rebuilt whenever that file is touched. Let's apply the same build dependency trick used for CONFIG_* symbols where the time stamp of empty files whose paths matching those symbols is used to trigger fine grained rebuilds. In our case the key is the symbol name passed to EXPORT_SYMBOL(). However, unlike config options, we cannot just use fixdep to parse the source code for EXPORT_SYMBOL(ksym) because several variants exist and parsing them all in a separate tool, and keeping it in synch, is not trivially maintainable. Furthermore, there are variants such as EXPORT_SYMBOL_GPL(pci_user_read_config_##size); that are instanciated via a macro for which we can't easily determine the actual exported symbol name(s) short of actually running the preprocessor on them. Storing the symbol name string in a special ELF section doesn't work for targets that output assembly or preprocessed source. So the best way is really to leverage the preprocessor by having it output actual symbol names anchored by a special sequence that can be easily filtered out. Then the list of symbols is simply fed to fixdep to be merged with the other dependencies. That implies the preprocessor is executed twice for each source file. A previous attempt relied on a warning pragma for each EXPORT_SYMBOL() instance that was filtered apart from stderr by the build system with a sed script during the actual compilation pass. Unfortunately the preprocessor/compiler diagnostic output isn't stable between versions and this solution, although more efficient, was deemed too fragile. Because of the lowercasing performed by fixdep, there might be name collisions triggering spurious rebuilds for similar symbols. But this shouldn't be a big issue in practice. (This is the case for CONFIG_* symbols and I didn't want to be different here, whatever the original reason for doing so.) To avoid needless build overhead, the exported symbol name gathering is performed only when CONFIG_TRIM_UNUSED_KSYMS is selected. Signed-off-by: Nicolas Pitre Acked-by: Rusty Russell --- include/linux/export.h | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/export.h b/include/linux/export.h index 77afdb2a2506..2f9ccbe6a639 100644 --- a/include/linux/export.h +++ b/include/linux/export.h @@ -65,7 +65,18 @@ extern struct module __this_module; __attribute__((section("___ksymtab" sec "+" #sym), unused)) \ = { (unsigned long)&sym, __kstrtab_##sym } -#ifdef CONFIG_TRIM_UNUSED_KSYMS +#if defined(__KSYM_DEPS__) + +/* + * For fine grained build dependencies, we want to tell the build system + * about each possible exported symbol even if they're not actually exported. + * We use a string pattern that is unlikely to be valid code that the build + * system filters out from the preprocessor output (see ksym_dep_filter + * in scripts/Kbuild.include). + */ +#define __EXPORT_SYMBOL(sym, sec) === __KSYM_##sym === + +#elif defined(CONFIG_TRIM_UNUSED_KSYMS) #include #include -- cgit v1.2.3 From 6c96f05c8bb8bc4177613ef3c23a56b455e75887 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 23 Feb 2016 18:46:24 +0100 Subject: reset: Make [of_]reset_control_get[_foo] functions wrappers With both the regular, _by_index and _optional variants we already have quite a few variants of [of_]reset_control_get[_foo], the upcoming addition of shared reset lines support makes this worse. This commit changes all the variants into wrappers around common core functions. For completeness sake this commit also adds a new devm_get_reset_control_by_index wrapper. Signed-off-by: Hans de Goede Signed-off-by: Philipp Zabel --- include/linux/reset.h | 126 +++++++++++++++++++++++++++++++++++--------------- 1 file changed, 90 insertions(+), 36 deletions(-) (limited to 'include/linux') diff --git a/include/linux/reset.h b/include/linux/reset.h index c4c097de0ba9..1bb69a29d6db 100644 --- a/include/linux/reset.h +++ b/include/linux/reset.h @@ -1,8 +1,8 @@ #ifndef _LINUX_RESET_H_ #define _LINUX_RESET_H_ -struct device; -struct device_node; +#include + struct reset_control; #ifdef CONFIG_RESET_CONTROLLER @@ -12,9 +12,11 @@ int reset_control_assert(struct reset_control *rstc); int reset_control_deassert(struct reset_control *rstc); int reset_control_status(struct reset_control *rstc); -struct reset_control *reset_control_get(struct device *dev, const char *id); +struct reset_control *__of_reset_control_get(struct device_node *node, + const char *id, int index); void reset_control_put(struct reset_control *rstc); -struct reset_control *devm_reset_control_get(struct device *dev, const char *id); +struct reset_control *__devm_reset_control_get(struct device *dev, + const char *id, int index); int __must_check device_reset(struct device *dev); @@ -23,24 +25,6 @@ static inline int device_reset_optional(struct device *dev) return device_reset(dev); } -static inline struct reset_control *reset_control_get_optional( - struct device *dev, const char *id) -{ - return reset_control_get(dev, id); -} - -static inline struct reset_control *devm_reset_control_get_optional( - struct device *dev, const char *id) -{ - return devm_reset_control_get(dev, id); -} - -struct reset_control *of_reset_control_get(struct device_node *node, - const char *id); - -struct reset_control *of_reset_control_get_by_index( - struct device_node *node, int index); - #else static inline int reset_control_reset(struct reset_control *rstc) @@ -77,44 +61,114 @@ static inline int device_reset_optional(struct device *dev) return -ENOTSUPP; } -static inline struct reset_control *__must_check reset_control_get( - struct device *dev, const char *id) +static inline struct reset_control *__of_reset_control_get( + struct device_node *node, + const char *id, int index) { - WARN_ON(1); return ERR_PTR(-EINVAL); } -static inline struct reset_control *__must_check devm_reset_control_get( - struct device *dev, const char *id) +static inline struct reset_control *__devm_reset_control_get( + struct device *dev, + const char *id, int index) { - WARN_ON(1); return ERR_PTR(-EINVAL); } -static inline struct reset_control *reset_control_get_optional( +#endif /* CONFIG_RESET_CONTROLLER */ + +/** + * reset_control_get - Lookup and obtain a reference to a reset controller. + * @dev: device to be reset by the controller + * @id: reset line name + * + * Returns a struct reset_control or IS_ERR() condition containing errno. + * + * Use of id names is optional. + */ +static inline struct reset_control *__must_check reset_control_get( struct device *dev, const char *id) { - return ERR_PTR(-ENOTSUPP); +#ifndef CONFIG_RESET_CONTROLLER + WARN_ON(1); +#endif + return __of_reset_control_get(dev ? dev->of_node : NULL, id, 0); } -static inline struct reset_control *devm_reset_control_get_optional( +static inline struct reset_control *reset_control_get_optional( struct device *dev, const char *id) { - return ERR_PTR(-ENOTSUPP); + return __of_reset_control_get(dev ? dev->of_node : NULL, id, 0); } +/** + * of_reset_control_get - Lookup and obtain a reference to a reset controller. + * @node: device to be reset by the controller + * @id: reset line name + * + * Returns a struct reset_control or IS_ERR() condition containing errno. + * + * Use of id names is optional. + */ static inline struct reset_control *of_reset_control_get( struct device_node *node, const char *id) { - return ERR_PTR(-ENOTSUPP); + return __of_reset_control_get(node, id, 0); } +/** + * of_reset_control_get_by_index - Lookup and obtain a reference to a reset + * controller by index. + * @node: device to be reset by the controller + * @index: index of the reset controller + * + * This is to be used to perform a list of resets for a device or power domain + * in whatever order. Returns a struct reset_control or IS_ERR() condition + * containing errno. + */ static inline struct reset_control *of_reset_control_get_by_index( - struct device_node *node, int index) + struct device_node *node, int index) { - return ERR_PTR(-ENOTSUPP); + return __of_reset_control_get(node, NULL, index); } -#endif /* CONFIG_RESET_CONTROLLER */ +/** + * devm_reset_control_get - resource managed reset_control_get() + * @dev: device to be reset by the controller + * @id: reset line name + * + * Managed reset_control_get(). For reset controllers returned from this + * function, reset_control_put() is called automatically on driver detach. + * See reset_control_get() for more information. + */ +static inline struct reset_control *__must_check devm_reset_control_get( + struct device *dev, const char *id) +{ +#ifndef CONFIG_RESET_CONTROLLER + WARN_ON(1); +#endif + return __devm_reset_control_get(dev, id, 0); +} + +static inline struct reset_control *devm_reset_control_get_optional( + struct device *dev, const char *id) +{ + return __devm_reset_control_get(dev, id, 0); +} + +/** + * devm_reset_control_get_by_index - resource managed reset_control_get + * @dev: device to be reset by the controller + * @index: index of the reset controller + * + * Managed reset_control_get(). For reset controllers returned from this + * function, reset_control_put() is called automatically on driver detach. + * See reset_control_get() for more information. + */ +static inline struct reset_control *devm_reset_control_get_by_index( + struct device *dev, int index) +{ + return __devm_reset_control_get(dev, NULL, index); +} #endif -- cgit v1.2.3 From c15ddec2ca06076a11195313aa1fce47d2a28c5d Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 23 Feb 2016 18:46:25 +0100 Subject: reset: Share struct reset_control between reset_control_get calls Now that struct reset_control no longer stores the device pointer for the device calling reset_control_get we can share a single struct reset_control when multiple calls to reset_control_get are made for the same reset line (same id / index). This is a preparation patch for adding support for shared reset lines. Signed-off-by: Hans de Goede Signed-off-by: Philipp Zabel --- include/linux/reset-controller.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/reset-controller.h b/include/linux/reset-controller.h index a3a5bcdb1d02..b91ba932bbd4 100644 --- a/include/linux/reset-controller.h +++ b/include/linux/reset-controller.h @@ -31,6 +31,7 @@ struct of_phandle_args; * @ops: a pointer to device specific struct reset_control_ops * @owner: kernel module of the reset controller driver * @list: internal list of reset controller devices + * @reset_control_head: head of internal list of requested reset controls * @of_node: corresponding device tree node as phandle target * @of_reset_n_cells: number of cells in reset line specifiers * @of_xlate: translation function to translate from specifier as found in the @@ -41,6 +42,7 @@ struct reset_controller_dev { const struct reset_control_ops *ops; struct module *owner; struct list_head list; + struct list_head reset_control_head; struct device_node *of_node; int of_reset_n_cells; int (*of_xlate)(struct reset_controller_dev *rcdev, -- cgit v1.2.3 From 0b52297f2288ca239e598afe6c92db83d8d2bfcd Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 23 Feb 2016 18:46:26 +0100 Subject: reset: Add support for shared reset controls In some SoCs some hw-blocks share a reset control. Add support for this setup by adding new: reset_control_get_shared() devm_reset_control_get_shared() devm_reset_control_get_shared_by_index() methods to get a reset_control. Note that this patch omits adding of_ variants, if these are needed later they can be easily added. This patch also changes the behavior of the existing exclusive reset_control_get() variants, if these are now called more then once for the same reset_control they will return -EBUSY. To catch existing drivers triggering this error (there should not be any) a WARN_ON(1) is added in this path. When a reset_control is shared, the behavior of reset_control_assert / deassert is changed, for shared reset_controls these will work like the clock-enable/disable and regulator-on/off functions. They will keep a deassert_count, and only (re-)assert the reset after reset_control_assert has been called as many times as reset_control_deassert was called. Calling reset_control_assert without first calling reset_control_deassert is not allowed on a shared reset control. Calling reset_control_reset is also not allowed on a shared reset control. Signed-off-by: Hans de Goede Signed-off-by: Philipp Zabel --- include/linux/reset.h | 96 +++++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 81 insertions(+), 15 deletions(-) (limited to 'include/linux') diff --git a/include/linux/reset.h b/include/linux/reset.h index 1bb69a29d6db..a552134a209e 100644 --- a/include/linux/reset.h +++ b/include/linux/reset.h @@ -13,10 +13,10 @@ int reset_control_deassert(struct reset_control *rstc); int reset_control_status(struct reset_control *rstc); struct reset_control *__of_reset_control_get(struct device_node *node, - const char *id, int index); + const char *id, int index, int shared); void reset_control_put(struct reset_control *rstc); struct reset_control *__devm_reset_control_get(struct device *dev, - const char *id, int index); + const char *id, int index, int shared); int __must_check device_reset(struct device *dev); @@ -63,14 +63,14 @@ static inline int device_reset_optional(struct device *dev) static inline struct reset_control *__of_reset_control_get( struct device_node *node, - const char *id, int index) + const char *id, int index, int shared) { return ERR_PTR(-EINVAL); } static inline struct reset_control *__devm_reset_control_get( struct device *dev, - const char *id, int index) + const char *id, int index, int shared) { return ERR_PTR(-EINVAL); } @@ -78,11 +78,17 @@ static inline struct reset_control *__devm_reset_control_get( #endif /* CONFIG_RESET_CONTROLLER */ /** - * reset_control_get - Lookup and obtain a reference to a reset controller. + * reset_control_get - Lookup and obtain an exclusive reference to a + * reset controller. * @dev: device to be reset by the controller * @id: reset line name * * Returns a struct reset_control or IS_ERR() condition containing errno. + * If this function is called more then once for the same reset_control it will + * return -EBUSY. + * + * See reset_control_get_shared for details on shared references to + * reset-controls. * * Use of id names is optional. */ @@ -92,17 +98,46 @@ static inline struct reset_control *__must_check reset_control_get( #ifndef CONFIG_RESET_CONTROLLER WARN_ON(1); #endif - return __of_reset_control_get(dev ? dev->of_node : NULL, id, 0); + return __of_reset_control_get(dev ? dev->of_node : NULL, id, 0, 0); } static inline struct reset_control *reset_control_get_optional( struct device *dev, const char *id) { - return __of_reset_control_get(dev ? dev->of_node : NULL, id, 0); + return __of_reset_control_get(dev ? dev->of_node : NULL, id, 0, 0); } /** - * of_reset_control_get - Lookup and obtain a reference to a reset controller. + * reset_control_get_shared - Lookup and obtain a shared reference to a + * reset controller. + * @dev: device to be reset by the controller + * @id: reset line name + * + * Returns a struct reset_control or IS_ERR() condition containing errno. + * This function is intended for use with reset-controls which are shared + * between hardware-blocks. + * + * When a reset-control is shared, the behavior of reset_control_assert / + * deassert is changed, the reset-core will keep track of a deassert_count + * and only (re-)assert the reset after reset_control_assert has been called + * as many times as reset_control_deassert was called. Also see the remark + * about shared reset-controls in the reset_control_assert docs. + * + * Calling reset_control_assert without first calling reset_control_deassert + * is not allowed on a shared reset control. Calling reset_control_reset is + * also not allowed on a shared reset control. + * + * Use of id names is optional. + */ +static inline struct reset_control *reset_control_get_shared( + struct device *dev, const char *id) +{ + return __of_reset_control_get(dev ? dev->of_node : NULL, id, 0, 1); +} + +/** + * of_reset_control_get - Lookup and obtain an exclusive reference to a + * reset controller. * @node: device to be reset by the controller * @id: reset line name * @@ -113,12 +148,12 @@ static inline struct reset_control *reset_control_get_optional( static inline struct reset_control *of_reset_control_get( struct device_node *node, const char *id) { - return __of_reset_control_get(node, id, 0); + return __of_reset_control_get(node, id, 0, 0); } /** - * of_reset_control_get_by_index - Lookup and obtain a reference to a reset - * controller by index. + * of_reset_control_get_by_index - Lookup and obtain an exclusive reference to + * a reset controller by index. * @node: device to be reset by the controller * @index: index of the reset controller * @@ -129,7 +164,7 @@ static inline struct reset_control *of_reset_control_get( static inline struct reset_control *of_reset_control_get_by_index( struct device_node *node, int index) { - return __of_reset_control_get(node, NULL, index); + return __of_reset_control_get(node, NULL, index, 0); } /** @@ -147,13 +182,13 @@ static inline struct reset_control *__must_check devm_reset_control_get( #ifndef CONFIG_RESET_CONTROLLER WARN_ON(1); #endif - return __devm_reset_control_get(dev, id, 0); + return __devm_reset_control_get(dev, id, 0, 0); } static inline struct reset_control *devm_reset_control_get_optional( struct device *dev, const char *id) { - return __devm_reset_control_get(dev, id, 0); + return __devm_reset_control_get(dev, id, 0, 0); } /** @@ -168,7 +203,38 @@ static inline struct reset_control *devm_reset_control_get_optional( static inline struct reset_control *devm_reset_control_get_by_index( struct device *dev, int index) { - return __devm_reset_control_get(dev, NULL, index); + return __devm_reset_control_get(dev, NULL, index, 0); +} + +/** + * devm_reset_control_get_shared - resource managed reset_control_get_shared() + * @dev: device to be reset by the controller + * @id: reset line name + * + * Managed reset_control_get_shared(). For reset controllers returned from + * this function, reset_control_put() is called automatically on driver detach. + * See reset_control_get_shared() for more information. + */ +static inline struct reset_control *devm_reset_control_get_shared( + struct device *dev, const char *id) +{ + return __devm_reset_control_get(dev, id, 0, 1); +} + +/** + * devm_reset_control_get_shared_by_index - resource managed + * reset_control_get_shared + * @dev: device to be reset by the controller + * @index: index of the reset controller + * + * Managed reset_control_get_shared(). For reset controllers returned from + * this function, reset_control_put() is called automatically on driver detach. + * See reset_control_get_shared() for more information. + */ +static inline struct reset_control *devm_reset_control_get_shared_by_index( + struct device *dev, int index) +{ + return __devm_reset_control_get(dev, NULL, index, 1); } #endif -- cgit v1.2.3 From 44debe7a123cc760fc90ccbe253210798c917fa7 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 30 Mar 2016 11:26:35 +0200 Subject: vgacon: dummy implementation for vgacon_text_force MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This allows us to ditch a ton of ugly #ifdefs from a bunch of drm modeset drivers. v2: Make the dummy function actually return a sane value, spotted by Ville. v3: Because the patch is still in limbo there's no more drivers to convert, noticed by Emil. v4: Rebase once more, because hooray. I'll just go ahead an apply this one later on to drm-misc. Cc: Emil Velikov Cc: Ville Syrjälä Cc: Andrew Morton Cc: Greg Kroah-Hartman Reviewed-by: Emil Velikov Reviewed-by: Alex Deucher Signed-off-by: Daniel Vetter --- include/linux/console.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/console.h b/include/linux/console.h index ea731af2451e..e49cc1ef19be 100644 --- a/include/linux/console.h +++ b/include/linux/console.h @@ -191,6 +191,8 @@ void vcs_remove_sysfs(int index); #ifdef CONFIG_VGA_CONSOLE extern bool vgacon_text_force(void); +#else +static inline bool vgacon_text_force(void) { return false; } #endif #endif /* _LINUX_CONSOLE_H */ -- cgit v1.2.3 From 8cb359e3a1f6318f971bec281623613f48b711be Mon Sep 17 00:00:00 2001 From: Luis de Bethencourt Date: Wed, 23 Mar 2016 12:34:41 +0000 Subject: iio: buffer: add missing descriptions in iio_buffer_access_funcs The members buffer_group and attrs of iio_buffer_access_funcs have no descriptions for the documentation. Adding them. Fixes: 08e7e0adaa17 ("iio: buffer: Allocate standard attributes in the core") Signed-off-by: Luis de Bethencourt Signed-off-by: Jonathan Cameron --- include/linux/iio/buffer.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/iio/buffer.h b/include/linux/iio/buffer.h index 2ec3ad58e8a0..70a5164f4728 100644 --- a/include/linux/iio/buffer.h +++ b/include/linux/iio/buffer.h @@ -83,10 +83,12 @@ struct iio_buffer_access_funcs { * @access: [DRIVER] buffer access functions associated with the * implementation. * @scan_el_dev_attr_list:[INTERN] list of scan element related attributes. + * @buffer_group: [INTERN] attributes of the buffer group * @scan_el_group: [DRIVER] attribute group for those attributes not * created from the iio_chan_info array. * @pollq: [INTERN] wait queue to allow for polling on the buffer. * @stufftoread: [INTERN] flag to indicate new data. + * @attrs: [INTERN] standard attributes of the buffer * @demux_list: [INTERN] list of operations required to demux the scan. * @demux_bounce: [INTERN] buffer for doing gather from incoming scan. * @buffer_list: [INTERN] entry in the devices list of current buffers. -- cgit v1.2.3 From fddcca5107051adf9e4481d2a79ae0616577fd2c Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 29 Feb 2016 13:20:28 +0100 Subject: mtd: avoid stack overflow in MTD CFI code When map_word gets too large, we use a lot of kernel stack, and for MTD_MAP_BANK_WIDTH_32, this means we use more than the recommended 1024 bytes in a number of functions: drivers/mtd/chips/cfi_cmdset_0020.c: In function 'cfi_staa_write_buffers': drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1336 bytes is larger than 1024 bytes [-Wframe-larger-than=] drivers/mtd/chips/cfi_cmdset_0020.c: In function 'cfi_staa_erase_varsize': drivers/mtd/chips/cfi_cmdset_0020.c:972:1: warning: the frame size of 1208 bytes is larger than 1024 bytes [-Wframe-larger-than=] drivers/mtd/chips/cfi_cmdset_0001.c: In function 'do_write_buffer': drivers/mtd/chips/cfi_cmdset_0001.c:1835:1: warning: the frame size of 1240 bytes is larger than 1024 bytes [-Wframe-larger-than=] This can be avoided if all operations on the map word are done indirectly and the stack gets reused between the calls. We can mostly achieve this by selecting MTD_COMPLEX_MAPPINGS whenever MTD_MAP_BANK_WIDTH_32 is set, but for the case that no other bank width is enabled, we also need to use a non-constant map_bankwidth() to convince the compiler to use less stack. Signed-off-by: Arnd Bergmann [Brian: this patch mostly achieves its goal by forcing MTD_COMPLEX_MAPPINGS (and the accompanying indirection) for 256-bit mappings; the rest of the change is mostly a wash, though it helps reduce stack size slightly. If we really care about supporting 256-bit mappings though, we should consider rewriting some of this code to avoid keeping and assigning so many 256-bit objects on the stack.] Signed-off-by: Brian Norris --- include/linux/mtd/map.h | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h index 5e0eb7ccabd4..3aa56e3104bb 100644 --- a/include/linux/mtd/map.h +++ b/include/linux/mtd/map.h @@ -122,18 +122,13 @@ #endif #ifdef CONFIG_MTD_MAP_BANK_WIDTH_32 -# ifdef map_bankwidth -# undef map_bankwidth -# define map_bankwidth(map) ((map)->bankwidth) -# undef map_bankwidth_is_large -# define map_bankwidth_is_large(map) (map_bankwidth(map) > BITS_PER_LONG/8) -# undef map_words -# define map_words(map) map_calc_words(map) -# else -# define map_bankwidth(map) 32 -# define map_bankwidth_is_large(map) (1) -# define map_words(map) map_calc_words(map) -# endif +/* always use indirect access for 256-bit to preserve kernel stack */ +# undef map_bankwidth +# define map_bankwidth(map) ((map)->bankwidth) +# undef map_bankwidth_is_large +# define map_bankwidth_is_large(map) (map_bankwidth(map) > BITS_PER_LONG/8) +# undef map_words +# define map_words(map) map_calc_words(map) #define map_bankwidth_is_32(map) (map_bankwidth(map) == 32) #undef MAX_MAP_BANKWIDTH #define MAX_MAP_BANKWIDTH 32 -- cgit v1.2.3 From 5651d6aaf489d1db48c253cf884b40214e91c2c5 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 26 Feb 2016 11:50:28 +0100 Subject: mtd: bcm47xxsflash: use ioremap_cache() instead of KSEG0ADDR() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Using KSEG0ADDR makes code highly MIPS dependent and not portable. Thanks to the fix a68f376 ("MIPS: io.h: Define `ioremap_cache'") we can use ioremap_cache which is generic and supported on MIPS as well now. KSEG0ADDR was translating 0x1c000000 into 0x9c000000. With ioremap_cache we use MIPS's __ioremap (and then remap_area_pages). This results in different address (e.g. 0xc0080000) but it still should be cached as expected and it was successfully tested with BCM47186B0. Other than that drivers/bcma/driver_chipcommon_sflash.c nicely setups a struct resource for access window, but we wren't using it. Use it now and drop duplicated info. Signed-off-by: Brian Norris Signed-off-by: Rafał Miłecki --- include/linux/bcma/bcma_driver_chipcommon.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index 846513c73606..a5ac2cad5cb7 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -587,7 +587,6 @@ struct mtd_info; struct bcma_sflash { bool present; - u32 window; u32 blocksize; u16 numblocks; u32 size; -- cgit v1.2.3 From 5b01e4b9efa0b78672cbbea830c9fbcc7f239e29 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Mon, 4 Apr 2016 11:43:54 +0200 Subject: libata: Implement NCQ autosense Some newer devices support NCQ autosense (cf ACS-4), so we should be using it to retrieve the sense code and speed up recovery. Signed-off-by: Hannes Reinecke Signed-off-by: Tejun Heo --- include/linux/ata.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ata.h b/include/linux/ata.h index c1a2f345cbe6..e797e1b53006 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -528,6 +528,8 @@ struct ata_bmdma_prd { #define ata_id_cdb_intr(id) (((id)[ATA_ID_CONFIG] & 0x60) == 0x20) #define ata_id_has_da(id) ((id)[ATA_ID_SATA_CAPABILITY_2] & (1 << 4)) #define ata_id_has_devslp(id) ((id)[ATA_ID_FEATURE_SUPP] & (1 << 8)) +#define ata_id_has_ncq_autosense(id) \ + ((id)[ATA_ID_FEATURE_SUPP] & (1 << 7)) static inline bool ata_id_has_hipm(const u16 *id) { -- cgit v1.2.3 From e87fd28cf9a2d9018ac4b6dd92f0b417714bc18d Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Mon, 4 Apr 2016 11:43:55 +0200 Subject: libata: Implement support for sense data reporting ACS-4 defines a sense data reporting feature set. This patch implements support for it. tj: Cosmetic formatting updates. Signed-off-by: Hannes Reinecke Signed-off-by: Tejun Heo --- include/linux/ata.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ata.h b/include/linux/ata.h index e797e1b53006..00aebc4c83ad 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -385,6 +385,8 @@ enum { SATA_SSP = 0x06, /* Software Settings Preservation */ SATA_DEVSLP = 0x09, /* Device Sleep */ + SETFEATURE_SENSE_DATA = 0xC3, /* Sense Data Reporting feature */ + /* feature values for SET_MAX */ ATA_SET_MAX_ADDR = 0x00, ATA_SET_MAX_PASSWD = 0x01, @@ -718,6 +720,20 @@ static inline bool ata_id_has_read_log_dma_ext(const u16 *id) return false; } +static inline bool ata_id_has_sense_reporting(const u16 *id) +{ + if (!(id[ATA_ID_CFS_ENABLE_2] & (1 << 15))) + return false; + return id[ATA_ID_COMMAND_SET_3] & (1 << 6); +} + +static inline bool ata_id_sense_reporting_enabled(const u16 *id) +{ + if (!(id[ATA_ID_CFS_ENABLE_2] & (1 << 15))) + return false; + return id[ATA_ID_COMMAND_SET_4] & (1 << 6); +} + /** * ata_id_major_version - get ATA level of drive * @id: Identify data -- cgit v1.2.3 From 06dbde5f3a44248fc02e24d662ac4849202abb48 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Mon, 4 Apr 2016 11:44:03 +0200 Subject: libata: Implement control mode page to select sense format Implement MODE SELECT for the control mode page to allow the OS to switch to descriptor sense. tj: Dropped s/sb/cmd->sense_buffer/ in ata_gen_ata_sense(). Added @dev description to ata_msense_ctl_mode(). Signed-off-by: Hannes Reinecke Signed-off-by: Tejun Heo --- include/linux/libata.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index 2c4ebef79d0c..a418bca0df0d 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -180,6 +180,7 @@ enum { ATA_DFLAG_DA = (1 << 26), /* device supports Device Attention */ ATA_DFLAG_DEVSLP = (1 << 27), /* device supports Device Sleep */ ATA_DFLAG_ACPI_DISABLED = (1 << 28), /* ACPI for the device is disabled */ + ATA_DFLAG_D_SENSE = (1 << 29), /* Descriptor sense requested */ ATA_DEV_UNKNOWN = 0, /* unknown device */ ATA_DEV_ATA = 1, /* ATA device */ -- cgit v1.2.3 From 4113652252fad972e0c191b1e536dc74a6faebdc Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Fri, 1 Apr 2016 21:38:16 +0200 Subject: reset: Add missing function stub for device_reset The Mediatek's thermal driver fails to compile when the RESET_CONTROLLER option is not set. Logically, as the driver depends on this option to compile, the Kconfig should select it but actually that is not correct because the Kconfig provides also the COMPILE_TEST to increase the compile test coverage. By providing the missing 'device_reset' stub for the driver in reset.h, that let the kernel to compile on different platforms with the Mediatek thermal driver enabled with the COMPILE_TEST option. Signed-off-by: Daniel Lezcano Signed-off-by: Philipp Zabel --- include/linux/reset.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/reset.h b/include/linux/reset.h index a552134a209e..ec0306ce7b92 100644 --- a/include/linux/reset.h +++ b/include/linux/reset.h @@ -56,6 +56,12 @@ static inline void reset_control_put(struct reset_control *rstc) WARN_ON(1); } +static inline int __must_check device_reset(struct device *dev) +{ + WARN_ON(1); + return -ENOTSUPP; +} + static inline int device_reset_optional(struct device *dev) { return -ENOTSUPP; -- cgit v1.2.3 From 974e0a4537f556867483f493c7f67ccdcb7fc504 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Mon, 4 Apr 2016 12:17:09 -0400 Subject: libata-core: Allow longer timeout for drive spinup from PUIS When spinning up a drive from powered on standby mode (PUIS), SETFEATURES_SPINUP is executed with the default timeout used for any SETFEATURES subcommand, that is 5+10 seconds. The total 15s is too short for some drives to complete spinup (e.g. drives with a large indirection table stored on media), resulting in ata_dev_read_id to fail twice on the execution of SETFEATURES_SPINUP. For this feature, allow a larger default timeout of 30 seconds. However, in the same spirit as with the timeout of other feature subcommands, do not ignore ata_probe_timeout if it is set). Signed-off-by: Damien Le Moal Signed-off-by: Tejun Heo --- include/linux/ata.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ata.h b/include/linux/ata.h index c1a2f345cbe6..f310ec0f072e 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -371,7 +371,8 @@ enum { SETFEATURES_AAM_ON = 0x42, SETFEATURES_AAM_OFF = 0xC2, - SETFEATURES_SPINUP = 0x07, /* Spin-up drive */ + SETFEATURES_SPINUP = 0x07, /* Spin-up drive */ + SETFEATURES_SPINUP_TIMEOUT = 30000, /* 30s timeout for drive spin-up from PUIS */ SETFEATURES_SATA_ENABLE = 0x10, /* Enable use of SATA feature */ SETFEATURES_SATA_DISABLE = 0x90, /* Disable use of SATA feature */ -- cgit v1.2.3 From 77ed2c5745d93416992857d124f35834b62b3e70 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Tue, 8 Mar 2016 20:01:32 +0900 Subject: android,lowmemorykiller: Don't abuse TIF_MEMDIE. Currently, lowmemorykiller (LMK) is using TIF_MEMDIE for two purposes. One is to remember processes killed by LMK, and the other is to accelerate termination of processes killed by LMK. But since LMK is invoked as a memory shrinker function, there still should be some memory available. It is very likely that memory allocations by processes killed by LMK will succeed without using ALLOC_NO_WATERMARKS via TIF_MEMDIE. Even if their allocations cannot escape from memory allocation loop unless they use ALLOC_NO_WATERMARKS, lowmem_deathpending_timeout can guarantee forward progress by choosing next victim process. On the other hand, mark_oom_victim() assumes that it must be called with oom_lock held and it must not be called after oom_killer_disable() was called. But LMK is calling it without holding oom_lock and checking oom_killer_disabled. It is possible that LMK calls mark_oom_victim() due to allocation requests by kernel threads after current thread returned from oom_killer_disabled(). This will break synchronization for PM/suspend. This patch introduces per a task_struct flag for remembering processes killed by LMK, and replaces TIF_MEMDIE with that flag. By applying this patch, assumption by mark_oom_victim() becomes true. Signed-off-by: Tetsuo Handa Acked-by: Michal Hocko Cc: Arve Hjonnevag Cc: Riley Andrews Signed-off-by: Greg Kroah-Hartman --- include/linux/sched.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 60bba7e032dc..9dff190e6a0a 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2184,6 +2184,7 @@ static inline void memalloc_noio_restore(unsigned int flags) #define PFA_NO_NEW_PRIVS 0 /* May not gain new privileges. */ #define PFA_SPREAD_PAGE 1 /* Spread page cache over cpuset */ #define PFA_SPREAD_SLAB 2 /* Spread some slab caches over cpuset */ +#define PFA_LMK_WAITING 3 /* Lowmemorykiller is waiting */ #define TASK_PFA_TEST(name, func) \ @@ -2207,6 +2208,9 @@ TASK_PFA_TEST(SPREAD_SLAB, spread_slab) TASK_PFA_SET(SPREAD_SLAB, spread_slab) TASK_PFA_CLEAR(SPREAD_SLAB, spread_slab) +TASK_PFA_TEST(LMK_WAITING, lmk_waiting) +TASK_PFA_SET(LMK_WAITING, lmk_waiting) + /* * task->jobctl flags */ -- cgit v1.2.3 From 4da56b99d99e5a7df2b7f11e87bfea935f909732 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 4 Apr 2016 14:46:42 +0100 Subject: mm/vmap: Add a notifier for when we run out of vmap address space vmaps are temporary kernel mappings that may be of long duration. Reusing a vmap on an object is preferrable for a driver as the cost of setting up the vmap can otherwise dominate the operation on the object. However, the vmap address space is rather limited on 32bit systems and so we add a notification for vmap pressure in order for the driver to release any cached vmappings. The interface is styled after the oom-notifier where the callees are passed a pointer to an unsigned long counter for them to indicate if they have freed any space. v2: Guard the blocking notifier call with gfpflags_allow_blocking() v3: Correct typo in forward declaration and move to head of file Signed-off-by: Chris Wilson Cc: Andrew Morton Cc: David Rientjes Cc: Roman Peniaev Cc: Mel Gorman Cc: linux-mm@kvack.org Cc: linux-kernel@vger.kernel.org Acked-by: Andrew Morton # for inclusion via DRM Cc: Joonas Lahtinen Cc: Tvrtko Ursulin Link: http://patchwork.freedesktop.org/patch/msgid/1459777603-23618-3-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen --- include/linux/vmalloc.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h index d1f1d338af20..8b51df3ab334 100644 --- a/include/linux/vmalloc.h +++ b/include/linux/vmalloc.h @@ -8,6 +8,7 @@ #include struct vm_area_struct; /* vma defining user mapping in mm_types.h */ +struct notifier_block; /* in notifier.h */ /* bits in flags of vmalloc's vm_struct below */ #define VM_IOREMAP 0x00000001 /* ioremap() and friends */ @@ -187,4 +188,7 @@ pcpu_free_vm_areas(struct vm_struct **vms, int nr_vms) #define VMALLOC_TOTAL 0UL #endif +int register_vmap_purge_notifier(struct notifier_block *nb); +int unregister_vmap_purge_notifier(struct notifier_block *nb); + #endif /* _LINUX_VMALLOC_H */ -- cgit v1.2.3 From c663e5f56737757db4d0b317c510ab505f93cecb Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 22 Mar 2016 10:51:16 +0100 Subject: gpio: support native single-ended hardware drivers Some GPIO controllers has a special hardware bit we can flip to support open drain / source. This means that on these hardwares we do not need to emulate OD/OS by setting the line to input instead of actively driving it high/low. Add an optional vtable callback to the driver set_single_ended() so that driver can implement this in hardware if they have it. We may need a pinctrl_gpio_set_config() call at some point to propagate this down to a backing pin control device on systems with split GPIO/pin control. Reported-by: Michael Hennerich Signed-off-by: Linus Walleij --- include/linux/gpio/driver.h | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h index bee976f82788..50882e09289b 100644 --- a/include/linux/gpio/driver.h +++ b/include/linux/gpio/driver.h @@ -19,6 +19,18 @@ struct gpio_device; #ifdef CONFIG_GPIOLIB +/** + * enum single_ended_mode - mode for single ended operation + * @LINE_MODE_PUSH_PULL: normal mode for a GPIO line, drive actively high/low + * @LINE_MODE_OPEN_DRAIN: set line to be open drain + * @LINE_MODE_OPEN_SOURCE: set line to be open source + */ +enum single_ended_mode { + LINE_MODE_PUSH_PULL, + LINE_MODE_OPEN_DRAIN, + LINE_MODE_OPEN_SOURCE, +}; + /** * struct gpio_chip - abstract a GPIO controller * @label: a functional name for the GPIO device, such as a part @@ -38,7 +50,15 @@ struct gpio_device; * @set: assigns output value for signal "offset" * @set_multiple: assigns output values for multiple signals defined by "mask" * @set_debounce: optional hook for setting debounce time for specified gpio in - * interrupt triggered gpio chips + * interrupt triggered gpio chips + * @set_single_ended: optional hook for setting a line as open drain, open + * source, or non-single ended (restore from open drain/source to normal + * push-pull mode) this should be implemented if the hardware supports + * open drain or open source settings. The GPIOlib will otherwise try + * to emulate open drain/source by not actively driving lines high/low + * if a consumer request this. The driver may return -ENOTSUPP if e.g. + * it supports just open drain but not open source and is called + * with LINE_MODE_OPEN_SOURCE as mode argument. * @to_irq: optional hook supporting non-static gpio_to_irq() mappings; * implementation may not sleep * @dbg_show: optional routine to show contents in debugfs; default code @@ -130,6 +150,9 @@ struct gpio_chip { int (*set_debounce)(struct gpio_chip *chip, unsigned offset, unsigned debounce); + int (*set_single_ended)(struct gpio_chip *chip, + unsigned offset, + enum single_ended_mode mode); int (*to_irq)(struct gpio_chip *chip, unsigned offset); -- cgit v1.2.3 From f9cd476123ced488e628339becedb2cf3243a58a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 4 Apr 2016 22:44:59 +0200 Subject: dmaengine: pl08x: allocate OF slave channel data at probe time The current OF translation of channels can never work with any DMA client using the DMA channels directly: the only way to get the channels initialized properly is in the dma_async_device_register() call, where chan->dev etc is allocated and initialized. Allocate and initialize all possible DMA channels and only augment a target channel with the periph_buses at of_xlate(). Remove some const settings to make things work. Cc: Maxime Ripard Tested-by: Joachim Eastwood Tested-by: Johannes Stezenbach Signed-off-by: Linus Walleij Signed-off-by: Vinod Koul --- include/linux/amba/pl08x.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 10fe2a211c2e..27e9ec8778eb 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -86,7 +86,7 @@ struct pl08x_channel_data { * @mem_buses: buses which memory can be accessed from: PL08X_AHB1 | PL08X_AHB2 */ struct pl08x_platform_data { - const struct pl08x_channel_data *slave_channels; + struct pl08x_channel_data *slave_channels; unsigned int num_slave_channels; struct pl08x_channel_data memcpy_channel; int (*get_xfer_signal)(const struct pl08x_channel_data *); -- cgit v1.2.3 From fa59507f720077a856c9952a31cfd45cd97ef6f9 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Wed, 30 Mar 2016 12:56:28 +0300 Subject: usb: otg-fsm: Add documentation for struct otg_fsm struct otg_fsm is the interface to the OTG state machine. Document the input, output and internal state variables. Definations are taken from Table 7-2 and Table 7-4 of the USB OTG & EH Specification Rev.2.0 Re-arrange some of the members as per use case for more clarity. Signed-off-by: Roger Quadros Acked-by: Peter Chen Signed-off-by: Peter Chen --- include/linux/usb/otg-fsm.h | 90 +++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 83 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/otg-fsm.h b/include/linux/usb/otg-fsm.h index 24198e16f849..8eec0c261be5 100644 --- a/include/linux/usb/otg-fsm.h +++ b/include/linux/usb/otg-fsm.h @@ -72,37 +72,113 @@ enum otg_fsm_timer { NUM_OTG_FSM_TIMERS, }; -/* OTG state machine according to the OTG spec */ +/** + * struct otg_fsm - OTG state machine according to the OTG spec + * + * OTG hardware Inputs + * + * Common inputs for A and B device + * @id: TRUE for B-device, FALSE for A-device. + * @adp_change: TRUE when current ADP measurement (n) value, compared to the + * ADP measurement taken at n-2, differs by more than CADP_THR + * @power_up: TRUE when the OTG device first powers up its USB system and + * ADP measurement taken if ADP capable + * + * A-Device state inputs + * @a_srp_det: TRUE if the A-device detects SRP + * @a_vbus_vld: TRUE when VBUS voltage is in regulation + * @b_conn: TRUE if the A-device detects connection from the B-device + * @a_bus_resume: TRUE when the B-device detects that the A-device is signaling + * a resume (K state) + * B-Device state inputs + * @a_bus_suspend: TRUE when the B-device detects that the A-device has put the + * bus into suspend + * @a_conn: TRUE if the B-device detects a connection from the A-device + * @b_se0_srp: TRUE when the line has been at SE0 for more than the minimum + * time before generating SRP + * @b_ssend_srp: TRUE when the VBUS has been below VOTG_SESS_VLD for more than + * the minimum time before generating SRP + * @b_sess_vld: TRUE when the B-device detects that the voltage on VBUS is + * above VOTG_SESS_VLD + * @test_device: TRUE when the B-device switches to B-Host and detects an OTG + * test device. This must be set by host/hub driver + * + * Application inputs (A-Device) + * @a_bus_drop: TRUE when A-device application needs to power down the bus + * @a_bus_req: TRUE when A-device application wants to use the bus. + * FALSE to suspend the bus + * + * Application inputs (B-Device) + * @b_bus_req: TRUE during the time that the Application running on the + * B-device wants to use the bus + * + * Auxilary inputs (OTG v1.3 only. Obsolete now.) + * @a_sess_vld: TRUE if the A-device detects that VBUS is above VA_SESS_VLD + * @b_bus_suspend: TRUE when the A-device detects that the B-device has put + * the bus into suspend + * @b_bus_resume: TRUE when the A-device detects that the B-device is signaling + * resume on the bus + * + * OTG Output status. Read only for users. Updated by OTG FSM helpers defined + * in this file + * + * Outputs for Both A and B device + * @drv_vbus: TRUE when A-device is driving VBUS + * @loc_conn: TRUE when the local device has signaled that it is connected + * to the bus + * @loc_sof: TRUE when the local device is generating activity on the bus + * @adp_prb: TRUE when the local device is in the process of doing + * ADP probing + * + * Outputs for B-device state + * @adp_sns: TRUE when the B-device is in the process of carrying out + * ADP sensing + * @data_pulse: TRUE when the B-device is performing data line pulsing + * + * Internal Variables + * + * a_set_b_hnp_en: TRUE when the A-device has successfully set the + * b_hnp_enable bit in the B-device. + * Unused as OTG fsm uses otg->host->b_hnp_enable instead + * b_srp_done: TRUE when the B-device has completed initiating SRP + * b_hnp_enable: TRUE when the B-device has accepted the + * SetFeature(b_hnp_enable) B-device. + * Unused as OTG fsm uses otg->gadget->b_hnp_enable instead + * a_clr_err: Asserted (by application ?) to clear a_vbus_err due to an + * overcurrent condition and causes the A-device to transition + * to a_wait_vfall + */ struct otg_fsm { /* Input */ int id; int adp_change; int power_up; - int test_device; - int a_bus_drop; - int a_bus_req; int a_srp_det; int a_vbus_vld; int b_conn; int a_bus_resume; int a_bus_suspend; int a_conn; - int b_bus_req; int b_se0_srp; int b_ssend_srp; int b_sess_vld; + int test_device; + int a_bus_drop; + int a_bus_req; + int b_bus_req; + /* Auxilary inputs */ int a_sess_vld; int b_bus_resume; int b_bus_suspend; /* Output */ - int data_pulse; int drv_vbus; int loc_conn; int loc_sof; int adp_prb; int adp_sns; + int data_pulse; /* Internal variables */ int a_set_b_hnp_en; @@ -110,7 +186,7 @@ struct otg_fsm { int b_hnp_enable; int a_clr_err; - /* Informative variables */ + /* Informative variables. All unused as of now */ int a_bus_drop_inf; int a_bus_req_inf; int a_clr_err_inf; -- cgit v1.2.3 From 4e332df63487418ec512c3c376c07df9ab3ae035 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Wed, 30 Mar 2016 12:56:29 +0300 Subject: usb: otg-fsm: support multiple instances Move the state_changed variable into struct otg_fsm so that we can support multiple instances. Signed-off-by: Roger Quadros Acked-by: Peter Chen Signed-off-by: Peter Chen --- include/linux/usb/otg-fsm.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/usb/otg-fsm.h b/include/linux/usb/otg-fsm.h index 8eec0c261be5..7a0350535cb1 100644 --- a/include/linux/usb/otg-fsm.h +++ b/include/linux/usb/otg-fsm.h @@ -210,6 +210,7 @@ struct otg_fsm { struct mutex lock; u8 *host_req_flag; struct delayed_work hnp_polling_work; + bool state_changed; }; struct otg_fsm_ops { -- cgit v1.2.3 From e68503bd6836ba765dc8e0ee77ea675fedc07e41 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 6 Apr 2016 16:14:24 +0100 Subject: KEYS: Generalise system_verify_data() to provide access to internal content Generalise system_verify_data() to provide access to internal content through a callback. This allows all the PKCS#7 stuff to be hidden inside this function and removed from the PE file parser and the PKCS#7 test key. If external content is not required, NULL should be passed as data to the function. If the callback is not required, that can be set to NULL. The function is now called verify_pkcs7_signature() to contrast with verify_pefile_signature() and the definitions of both have been moved into linux/verification.h along with the key_being_used_for enum. Signed-off-by: David Howells --- include/linux/verification.h | 50 +++++++++++++++++++++++++++++++++++++++++++ include/linux/verify_pefile.h | 22 ------------------- 2 files changed, 50 insertions(+), 22 deletions(-) create mode 100644 include/linux/verification.h delete mode 100644 include/linux/verify_pefile.h (limited to 'include/linux') diff --git a/include/linux/verification.h b/include/linux/verification.h new file mode 100644 index 000000000000..bb0fcf941cb7 --- /dev/null +++ b/include/linux/verification.h @@ -0,0 +1,50 @@ +/* Signature verification + * + * Copyright (C) 2014 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _LINUX_VERIFICATION_H +#define _LINUX_VERIFICATION_H + +/* + * The use to which an asymmetric key is being put. + */ +enum key_being_used_for { + VERIFYING_MODULE_SIGNATURE, + VERIFYING_FIRMWARE_SIGNATURE, + VERIFYING_KEXEC_PE_SIGNATURE, + VERIFYING_KEY_SIGNATURE, + VERIFYING_KEY_SELF_SIGNATURE, + VERIFYING_UNSPECIFIED_SIGNATURE, + NR__KEY_BEING_USED_FOR +}; +extern const char *const key_being_used_for[NR__KEY_BEING_USED_FOR]; + +#ifdef CONFIG_SYSTEM_DATA_VERIFICATION + +struct key; + +extern int verify_pkcs7_signature(const void *data, size_t len, + const void *raw_pkcs7, size_t pkcs7_len, + struct key *trusted_keys, + int untrusted_error, + enum key_being_used_for usage, + int (*view_content)(void *ctx, + const void *data, size_t len, + size_t asn1hdrlen), + void *ctx); + +#ifdef CONFIG_SIGNED_PE_FILE_VERIFICATION +extern int verify_pefile_signature(const void *pebuf, unsigned pelen, + struct key *trusted_keys, + enum key_being_used_for usage); +#endif + +#endif /* CONFIG_SYSTEM_DATA_VERIFICATION */ +#endif /* _LINUX_VERIFY_PEFILE_H */ diff --git a/include/linux/verify_pefile.h b/include/linux/verify_pefile.h deleted file mode 100644 index da2049b5161c..000000000000 --- a/include/linux/verify_pefile.h +++ /dev/null @@ -1,22 +0,0 @@ -/* Signed PE file verification - * - * Copyright (C) 2014 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _LINUX_VERIFY_PEFILE_H -#define _LINUX_VERIFY_PEFILE_H - -#include - -extern int verify_pefile_signature(const void *pebuf, unsigned pelen, - struct key *trusted_keyring, - enum key_being_used_for usage, - bool *_trusted); - -#endif /* _LINUX_VERIFY_PEFILE_H */ -- cgit v1.2.3 From bda850cd214e90b1be0cc25bc48c4f6ac53eb543 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 6 Apr 2016 16:14:24 +0100 Subject: PKCS#7: Make trust determination dependent on contents of trust keyring Make the determination of the trustworthiness of a key dependent on whether a key that can verify it is present in the supplied ring of trusted keys rather than whether or not the verifying key has KEY_FLAG_TRUSTED set. verify_pkcs7_signature() will return -ENOKEY if the PKCS#7 message trust chain cannot be verified. Signed-off-by: David Howells --- include/linux/verification.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/verification.h b/include/linux/verification.h index bb0fcf941cb7..a10549a6c7cd 100644 --- a/include/linux/verification.h +++ b/include/linux/verification.h @@ -33,7 +33,6 @@ struct key; extern int verify_pkcs7_signature(const void *data, size_t len, const void *raw_pkcs7, size_t pkcs7_len, struct key *trusted_keys, - int untrusted_error, enum key_being_used_for usage, int (*view_content)(void *ctx, const void *data, size_t len, -- cgit v1.2.3 From 31e6850e0fdb3a586363cc4d2f9801cdf9374310 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Tue, 5 Apr 2016 12:39:30 +0100 Subject: iommu: Add MMIO mapping type On some platforms, MMIO regions might need slightly different treatment compared to mapping regular memory; add the notion of MMIO mappings to the IOMMU API's memory type flags, so that callers can let the IOMMU drivers know to do the right thing. Signed-off-by: Robin Murphy Signed-off-by: Joerg Roedel --- include/linux/iommu.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/iommu.h b/include/linux/iommu.h index a5c539fa5d2b..34b643227df1 100644 --- a/include/linux/iommu.h +++ b/include/linux/io