From d6e640f9766e2fb9aa3853b4ff19e4d7d5d7e373 Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Tue, 8 May 2012 22:20:33 +0200 Subject: can: update documentation wording error frames -> error messages As Heinz-Juergen Oertel pointed out 'CAN error frames' are a already defined term for the CAN protocol violation indication on the wire. To avoid confusion with the error messages created by CAN drivers available via CAN RAW sockets update the documentation and change the naming from 'error frames' to 'error messages' or 'error message frames'. Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde --- include/linux/can.h | 8 ++++---- include/linux/can/error.h | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/linux/can.h b/include/linux/can.h index 9a19bcb3eeaf..17334c09bd93 100644 --- a/include/linux/can.h +++ b/include/linux/can.h @@ -21,7 +21,7 @@ /* special address description flags for the CAN_ID */ #define CAN_EFF_FLAG 0x80000000U /* EFF/SFF is set in the MSB */ #define CAN_RTR_FLAG 0x40000000U /* remote transmission request */ -#define CAN_ERR_FLAG 0x20000000U /* error frame */ +#define CAN_ERR_FLAG 0x20000000U /* error message frame */ /* valid bits in CAN ID for frame formats */ #define CAN_SFF_MASK 0x000007FFU /* standard frame format (SFF) */ @@ -32,14 +32,14 @@ * Controller Area Network Identifier structure * * bit 0-28 : CAN identifier (11/29 bit) - * bit 29 : error frame flag (0 = data frame, 1 = error frame) + * bit 29 : error message frame flag (0 = data frame, 1 = error message) * bit 30 : remote transmission request flag (1 = rtr frame) * bit 31 : frame format flag (0 = standard 11 bit, 1 = extended 29 bit) */ typedef __u32 canid_t; /* - * Controller Area Network Error Frame Mask structure + * Controller Area Network Error Message Frame Mask structure * * bit 0-28 : error class mask (see include/linux/can/error.h) * bit 29-31 : set to zero @@ -97,7 +97,7 @@ struct sockaddr_can { * & mask == can_id & mask * * The filter can be inverted (CAN_INV_FILTER bit set in can_id) or it can - * filter for error frames (CAN_ERR_FLAG bit set in mask). + * filter for error message frames (CAN_ERR_FLAG bit set in mask). */ struct can_filter { canid_t can_id; diff --git a/include/linux/can/error.h b/include/linux/can/error.h index 63e855ea6b84..7b7148bded71 100644 --- a/include/linux/can/error.h +++ b/include/linux/can/error.h @@ -1,7 +1,7 @@ /* * linux/can/error.h * - * Definitions of the CAN error frame to be filtered and passed to the user. + * Definitions of the CAN error messages to be filtered and passed to the user. * * Author: Oliver Hartkopp * Copyright (c) 2002-2007 Volkswagen Group Electronic Research @@ -12,7 +12,7 @@ #ifndef CAN_ERROR_H #define CAN_ERROR_H -#define CAN_ERR_DLC 8 /* dlc for error frames */ +#define CAN_ERR_DLC 8 /* dlc for error message frames */ /* error class (mask) in can_id */ #define CAN_ERR_TX_TIMEOUT 0x00000001U /* TX timeout (by netdevice driver) */ -- cgit v1.2.3 From a60977a51333a8108f0574aa26094d66b7fedf34 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 25 May 2012 14:59:26 +0900 Subject: sh: clkfwk: Move to common clk_div_table accessors for div4/div6. This plugs in a generic clk_div_table, based on the div4 version. div6 is then adopted to use it for encapsulating its div table, which permits us to start div6/4 unification, as well as preparation for other div types. Signed-off-by: Paul Mundt --- include/linux/sh_clk.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h index c513b73cd7cb..706b803df7b7 100644 --- a/include/linux/sh_clk.h +++ b/include/linux/sh_clk.h @@ -18,7 +18,6 @@ struct clk_mapping { struct kref ref; }; - struct sh_clk_ops { #ifdef CONFIG_SH_CLK_CPG_LEGACY void (*init)(struct clk *clk); @@ -149,11 +148,13 @@ static inline int __deprecated sh_clk_mstp32_register(struct clk *clks, int nr) .flags = _flags, \ } -struct clk_div4_table { +struct clk_div_table { struct clk_div_mult_table *div_mult_table; void (*kick)(struct clk *clk); }; +#define clk_div4_table clk_div_table + int sh_clk_div4_register(struct clk *clks, int nr, struct clk_div4_table *table); int sh_clk_div4_enable_register(struct clk *clks, int nr, -- cgit v1.2.3 From 1111cc1e8080b5ff46f5b945acb2f99d6176b2d1 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 25 May 2012 15:21:43 +0900 Subject: sh: clkfwk: Introduce a div_mask for variable div types. This plugs in a div_mask for the clock and sets it up for the existing div6/4 cases. This will make it possible to support other div types, as well as share more div6/4 infrastructure. Signed-off-by: Paul Mundt --- include/linux/sh_clk.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include') diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h index 706b803df7b7..d540b8153178 100644 --- a/include/linux/sh_clk.h +++ b/include/linux/sh_clk.h @@ -30,6 +30,10 @@ struct sh_clk_ops { long (*round_rate)(struct clk *clk, unsigned long rate); }; +#define SH_CLK_DIV_MSK(div) ((1 << (div)) - 1) +#define SH_CLK_DIV4_MSK SH_CLK_DIV_MSK(4) +#define SH_CLK_DIV6_MSK SH_CLK_DIV_MSK(6) + struct clk { struct list_head node; struct clk *parent; @@ -51,6 +55,7 @@ struct clk { unsigned int enable_bit; void __iomem *mapped_reg; + unsigned int div_mask; unsigned long arch_flags; void *priv; struct clk_mapping *mapping; @@ -145,6 +150,7 @@ static inline int __deprecated sh_clk_mstp32_register(struct clk *clks, int nr) .enable_reg = (void __iomem *)_reg, \ .enable_bit = _shift, \ .arch_flags = _div_bitmap, \ + .div_mask = SH_CLK_DIV4_MSK, \ .flags = _flags, \ } @@ -167,6 +173,7 @@ int sh_clk_div4_reparent_register(struct clk *clks, int nr, { \ .enable_reg = (void __iomem *)_reg, \ .flags = _flags, \ + .div_mask = SH_CLK_DIV6_MSK, \ .parent_table = _parents, \ .parent_num = _num_parents, \ .src_shift = _src_shift, \ @@ -177,6 +184,7 @@ int sh_clk_div4_reparent_register(struct clk *clks, int nr, { \ .parent = _parent, \ .enable_reg = (void __iomem *)_reg, \ + .div_mask = SH_CLK_DIV6_MSK, \ .flags = _flags, \ } -- cgit v1.2.3 From 75f5f8a56e0fdf6d32b3ae9c44c10bc0acd3857c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 25 May 2012 15:26:01 +0900 Subject: sh: clkfwk: Use shared sh_clk_div_recalc(). This generalizes the div4 recalc routine for use by div6 and others, then makes it the default. Signed-off-by: Paul Mundt --- include/linux/sh_clk.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h index d540b8153178..35a04f19fb53 100644 --- a/include/linux/sh_clk.h +++ b/include/linux/sh_clk.h @@ -172,6 +172,7 @@ int sh_clk_div4_reparent_register(struct clk *clks, int nr, _num_parents, _src_shift, _src_width) \ { \ .enable_reg = (void __iomem *)_reg, \ + .enable_bit = 0, /* unused */ \ .flags = _flags, \ .div_mask = SH_CLK_DIV6_MSK, \ .parent_table = _parents, \ @@ -184,6 +185,7 @@ int sh_clk_div4_reparent_register(struct clk *clks, int nr, { \ .parent = _parent, \ .enable_reg = (void __iomem *)_reg, \ + .enable_bit = 0, /* unused */ \ .div_mask = SH_CLK_DIV6_MSK, \ .flags = _flags, \ } -- cgit v1.2.3 From 764f4e4e33d18cde4dcaf8a0d860b749c6d6d08b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 25 May 2012 16:34:48 +0900 Subject: sh: clkfwk: Use shared sh_clk_div_enable/disable(). This introduces a new flag for clocks that need to have their divisor ratio set back to their initial mask at disable time to prevent interactivity problems with the clock stop bit (presently div6 only). With this in place it's possible to handle the corner case on top of the div4 op without any particular need for leaving things split out. Signed-off-by: Paul Mundt --- include/linux/sh_clk.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h index 35a04f19fb53..50910913b268 100644 --- a/include/linux/sh_clk.h +++ b/include/linux/sh_clk.h @@ -69,6 +69,8 @@ struct clk { #define CLK_ENABLE_REG_16BIT BIT(2) #define CLK_ENABLE_REG_8BIT BIT(3) +#define CLK_MASK_DIV_ON_DISABLE BIT(4) + #define CLK_ENABLE_REG_MASK (CLK_ENABLE_REG_32BIT | \ CLK_ENABLE_REG_16BIT | \ CLK_ENABLE_REG_8BIT) @@ -173,7 +175,7 @@ int sh_clk_div4_reparent_register(struct clk *clks, int nr, { \ .enable_reg = (void __iomem *)_reg, \ .enable_bit = 0, /* unused */ \ - .flags = _flags, \ + .flags = _flags | CLK_MASK_DIV_ON_DISABLE, \ .div_mask = SH_CLK_DIV6_MSK, \ .parent_table = _parents, \ .parent_num = _num_parents, \ @@ -187,7 +189,7 @@ int sh_clk_div4_reparent_register(struct clk *clks, int nr, .enable_reg = (void __iomem *)_reg, \ .enable_bit = 0, /* unused */ \ .div_mask = SH_CLK_DIV6_MSK, \ - .flags = _flags, \ + .flags = _flags | CLK_MASK_DIV_ON_DISABLE, \ } int sh_clk_div6_register(struct clk *clks, int nr); -- cgit v1.2.3 From 32fad281c0680ed0ccade7dda85a2121cf9b1d06 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 4 May 2012 02:32:53 +0000 Subject: KVM: PPC: Book3S HV: Make the guest hash table size configurable This adds a new ioctl to enable userspace to control the size of the guest hashed page table (HPT) and to clear it out when resetting the guest. The KVM_PPC_ALLOCATE_HTAB ioctl is a VM ioctl and takes as its parameter a pointer to a u32 containing the desired order of the HPT (log base 2 of the size in bytes), which is updated on successful return to the actual order of the HPT which was allocated. There must be no vcpus running at the time of this ioctl. To enforce this, we now keep a count of the number of vcpus running in kvm->arch.vcpus_running. If the ioctl is called when a HPT has already been allocated, we don't reallocate the HPT but just clear it out. We first clear the kvm->arch.rma_setup_done flag, which has two effects: (a) since we hold the kvm->lock mutex, it will prevent any vcpus from starting to run until we're done, and (b) it means that the first vcpu to run after we're done will re-establish the VRMA if necessary. If userspace doesn't call this ioctl before running the first vcpu, the kernel will allocate a default-sized HPT at that point. We do it then rather than when creating the VM, as the code did previously, so that userspace has a chance to do the ioctl if it wants. When allocating the HPT, we can allocate either from the kernel page allocator, or from the preallocated pool. If userspace is asking for a different size from the preallocated HPTs, we first try to allocate using the kernel page allocator. Then we try to allocate from the preallocated pool, and then if that fails, we try allocating decreasing sizes from the kernel page allocator, down to the minimum size allowed (256kB). Note that the kernel page allocator limits allocations to 1 << CONFIG_FORCE_MAX_ZONEORDER pages, which by default corresponds to 16MB (on 64-bit powerpc, at least). Signed-off-by: Paul Mackerras [agraf: fix module compilation] Signed-off-by: Alexander Graf --- include/linux/kvm.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 09f2b3aa2da7..2ce09aa7d3b3 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -617,6 +617,7 @@ struct kvm_ppc_smmu_info { #define KVM_CAP_SIGNAL_MSI 77 #define KVM_CAP_PPC_GET_SMMU_INFO 78 #define KVM_CAP_S390_COW 79 +#define KVM_CAP_PPC_ALLOC_HTAB 80 #ifdef KVM_CAP_IRQ_ROUTING @@ -828,6 +829,8 @@ struct kvm_s390_ucas_mapping { #define KVM_SIGNAL_MSI _IOW(KVMIO, 0xa5, struct kvm_msi) /* Available with KVM_CAP_PPC_GET_SMMU_INFO */ #define KVM_PPC_GET_SMMU_INFO _IOR(KVMIO, 0xa6, struct kvm_ppc_smmu_info) +/* Available with KVM_CAP_PPC_ALLOC_HTAB */ +#define KVM_PPC_ALLOCATE_HTAB _IOWR(KVMIO, 0xa7, __u32) /* * ioctls for vcpu fds -- cgit v1.2.3 From b86aeafc766b71f6d55e54ed2c77fdf7f56ec1ba Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Wed, 25 Apr 2012 16:06:20 +0530 Subject: ARM: OMAP2+: SmartReflex: move the smartreflex header to include/linux/power Move the smartreflex header file (arch/arm/mach-omap2/smartreflex.h) in a new header file include/linux/power/smartreflex.h. This change makes the SmartReflex implementation ready for the move to drivers/. Signed-off-by: Jean Pihet Signed-off-by: J Keerthy Reviewed-by: Kevin Hilman Signed-off-by: Kevin Hilman --- include/linux/power/smartreflex.h | 257 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 257 insertions(+) create mode 100644 include/linux/power/smartreflex.h (limited to 'include') diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h new file mode 100644 index 000000000000..69eb270c6297 --- /dev/null +++ b/include/linux/power/smartreflex.h @@ -0,0 +1,257 @@ +/* + * OMAP Smartreflex Defines and Routines + * + * Author: Thara Gopinath + * + * Copyright (C) 2010 Texas Instruments, Inc. + * Thara Gopinath + * + * Copyright (C) 2008 Nokia Corporation + * Kalle Jokiniemi + * + * Copyright (C) 2007 Texas Instruments, Inc. + * Lesly A M + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __POWER_SMARTREFLEX_H +#define __POWER_SMARTREFLEX_H + +#include +#include + +#include + +/* + * Different Smartreflex IPs version. The v1 is the 65nm version used in + * OMAP3430. The v2 is the update for the 45nm version of the IP + * used in OMAP3630 and OMAP4430 + */ +#define SR_TYPE_V1 1 +#define SR_TYPE_V2 2 + +/* SMART REFLEX REG ADDRESS OFFSET */ +#define SRCONFIG 0x00 +#define SRSTATUS 0x04 +#define SENVAL 0x08 +#define SENMIN 0x0C +#define SENMAX 0x10 +#define SENAVG 0x14 +#define AVGWEIGHT 0x18 +#define NVALUERECIPROCAL 0x1c +#define SENERROR_V1 0x20 +#define ERRCONFIG_V1 0x24 +#define IRQ_EOI 0x20 +#define IRQSTATUS_RAW 0x24 +#define IRQSTATUS 0x28 +#define IRQENABLE_SET 0x2C +#define IRQENABLE_CLR 0x30 +#define SENERROR_V2 0x34 +#define ERRCONFIG_V2 0x38 + +/* Bit/Shift Positions */ + +/* SRCONFIG */ +#define SRCONFIG_ACCUMDATA_SHIFT 22 +#define SRCONFIG_SRCLKLENGTH_SHIFT 12 +#define SRCONFIG_SENNENABLE_V1_SHIFT 5 +#define SRCONFIG_SENPENABLE_V1_SHIFT 3 +#define SRCONFIG_SENNENABLE_V2_SHIFT 1 +#define SRCONFIG_SENPENABLE_V2_SHIFT 0 +#define SRCONFIG_CLKCTRL_SHIFT 0 + +#define SRCONFIG_ACCUMDATA_MASK (0x3ff << 22) + +#define SRCONFIG_SRENABLE BIT(11) +#define SRCONFIG_SENENABLE BIT(10) +#define SRCONFIG_ERRGEN_EN BIT(9) +#define SRCONFIG_MINMAXAVG_EN BIT(8) +#define SRCONFIG_DELAYCTRL BIT(2) + +/* AVGWEIGHT */ +#define AVGWEIGHT_SENPAVGWEIGHT_SHIFT 2 +#define AVGWEIGHT_SENNAVGWEIGHT_SHIFT 0 + +/* NVALUERECIPROCAL */ +#define NVALUERECIPROCAL_SENPGAIN_SHIFT 20 +#define NVALUERECIPROCAL_SENNGAIN_SHIFT 16 +#define NVALUERECIPROCAL_RNSENP_SHIFT 8 +#define NVALUERECIPROCAL_RNSENN_SHIFT 0 + +/* ERRCONFIG */ +#define ERRCONFIG_ERRWEIGHT_SHIFT 16 +#define ERRCONFIG_ERRMAXLIMIT_SHIFT 8 +#define ERRCONFIG_ERRMINLIMIT_SHIFT 0 + +#define SR_ERRWEIGHT_MASK (0x07 << 16) +#define SR_ERRMAXLIMIT_MASK (0xff << 8) +#define SR_ERRMINLIMIT_MASK (0xff << 0) + +#define ERRCONFIG_VPBOUNDINTEN_V1 BIT(31) +#define ERRCONFIG_VPBOUNDINTST_V1 BIT(30) +#define ERRCONFIG_MCUACCUMINTEN BIT(29) +#define ERRCONFIG_MCUACCUMINTST BIT(28) +#define ERRCONFIG_MCUVALIDINTEN BIT(27) +#define ERRCONFIG_MCUVALIDINTST BIT(26) +#define ERRCONFIG_MCUBOUNDINTEN BIT(25) +#define ERRCONFIG_MCUBOUNDINTST BIT(24) +#define ERRCONFIG_MCUDISACKINTEN BIT(23) +#define ERRCONFIG_VPBOUNDINTST_V2 BIT(23) +#define ERRCONFIG_MCUDISACKINTST BIT(22) +#define ERRCONFIG_VPBOUNDINTEN_V2 BIT(22) + +#define ERRCONFIG_STATUS_V1_MASK (ERRCONFIG_VPBOUNDINTST_V1 | \ + ERRCONFIG_MCUACCUMINTST | \ + ERRCONFIG_MCUVALIDINTST | \ + ERRCONFIG_MCUBOUNDINTST | \ + ERRCONFIG_MCUDISACKINTST) +/* IRQSTATUS */ +#define IRQSTATUS_MCUACCUMINT BIT(3) +#define IRQSTATUS_MCVALIDINT BIT(2) +#define IRQSTATUS_MCBOUNDSINT BIT(1) +#define IRQSTATUS_MCUDISABLEACKINT BIT(0) + +/* IRQENABLE_SET and IRQENABLE_CLEAR */ +#define IRQENABLE_MCUACCUMINT BIT(3) +#define IRQENABLE_MCUVALIDINT BIT(2) +#define IRQENABLE_MCUBOUNDSINT BIT(1) +#define IRQENABLE_MCUDISABLEACKINT BIT(0) + +/* Common Bit values */ + +#define SRCLKLENGTH_12MHZ_SYSCLK 0x3c +#define SRCLKLENGTH_13MHZ_SYSCLK 0x41 +#define SRCLKLENGTH_19MHZ_SYSCLK 0x60 +#define SRCLKLENGTH_26MHZ_SYSCLK 0x82 +#define SRCLKLENGTH_38MHZ_SYSCLK 0xC0 + +/* + * 3430 specific values. Maybe these should be passed from board file or + * pmic structures. + */ +#define OMAP3430_SR_ACCUMDATA 0x1f4 + +#define OMAP3430_SR1_SENPAVGWEIGHT 0x03 +#define OMAP3430_SR1_SENNAVGWEIGHT 0x03 + +#define OMAP3430_SR2_SENPAVGWEIGHT 0x01 +#define OMAP3430_SR2_SENNAVGWEIGHT 0x01 + +#define OMAP3430_SR_ERRWEIGHT 0x04 +#define OMAP3430_SR_ERRMAXLIMIT 0x02 + +/** + * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass + * pmic specific info to smartreflex driver + * + * @sr_pmic_init: API to initialize smartreflex on the PMIC side. + */ +struct omap_sr_pmic_data { + void (*sr_pmic_init) (void); +}; + +/** + * struct omap_smartreflex_dev_attr - Smartreflex Device attribute. + * + * @sensor_voltdm_name: Name of voltdomain of SR instance + */ +struct omap_smartreflex_dev_attr { + const char *sensor_voltdm_name; +}; + +#ifdef CONFIG_OMAP_SMARTREFLEX +/* + * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR. + * The smartreflex class driver should pass the class type. + * Should be used to populate the class_type field of the + * omap_smartreflex_class_data structure. + */ +#define SR_CLASS1 0x1 +#define SR_CLASS2 0x2 +#define SR_CLASS3 0x3 + +/** + * struct omap_sr_class_data - Smartreflex class driver info + * + * @enable: API to enable a particular class smaartreflex. + * @disable: API to disable a particular class smartreflex. + * @configure: API to configure a particular class smartreflex. + * @notify: API to notify the class driver about an event in SR. + * Not needed for class3. + * @notify_flags: specify the events to be notified to the class driver + * @class_type: specify which smartreflex class. + * Can be used by the SR driver to take any class + * based decisions. + */ +struct omap_sr_class_data { + int (*enable)(struct voltagedomain *voltdm); + int (*disable)(struct voltagedomain *voltdm, int is_volt_reset); + int (*configure)(struct voltagedomain *voltdm); + int (*notify)(struct voltagedomain *voltdm, u32 status); + u8 notify_flags; + u8 class_type; +}; + +/** + * struct omap_sr_nvalue_table - Smartreflex n-target value info + * + * @efuse_offs: The offset of the efuse where n-target values are stored. + * @nvalue: The n-target value. + */ +struct omap_sr_nvalue_table { + u32 efuse_offs; + u32 nvalue; +}; + +/** + * struct omap_sr_data - Smartreflex platform data. + * + * @ip_type: Smartreflex IP type. + * @senp_mod: SENPENABLE value for the sr + * @senn_mod: SENNENABLE value for sr + * @nvalue_count: Number of distinct nvalues in the nvalue table + * @enable_on_init: whether this sr module needs to enabled at + * boot up or not. + * @nvalue_table: table containing the efuse offsets and nvalues + * corresponding to them. + * @voltdm: Pointer to the voltage domain associated with the SR + */ +struct omap_sr_data { + int ip_type; + u32 senp_mod; + u32 senn_mod; + int nvalue_count; + bool enable_on_init; + struct omap_sr_nvalue_table *nvalue_table; + struct voltagedomain *voltdm; +}; + +/* Smartreflex module enable/disable interface */ +void omap_sr_enable(struct voltagedomain *voltdm); +void omap_sr_disable(struct voltagedomain *voltdm); +void omap_sr_disable_reset_volt(struct voltagedomain *voltdm); + +/* API to register the pmic specific data with the smartreflex driver. */ +void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data); + +/* Smartreflex driver hooks to be called from Smartreflex class driver */ +int sr_enable(struct voltagedomain *voltdm, unsigned long volt); +void sr_disable(struct voltagedomain *voltdm); +int sr_configure_errgen(struct voltagedomain *voltdm); +int sr_disable_errgen(struct voltagedomain *voltdm); +int sr_configure_minmax(struct voltagedomain *voltdm); + +/* API to register the smartreflex class driver with the smartreflex driver */ +int sr_register_class(struct omap_sr_class_data *class_data); +#else +static inline void omap_sr_enable(struct voltagedomain *voltdm) {} +static inline void omap_sr_disable(struct voltagedomain *voltdm) {} +static inline void omap_sr_disable_reset_volt( + struct voltagedomain *voltdm) {} +static inline void omap_sr_register_pmic( + struct omap_sr_pmic_data *pmic_data) {} +#endif +#endif -- cgit v1.2.3 From 80821c9c90427dd0f9274a82f9d69e43300d10bb Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Tue, 24 Apr 2012 10:22:12 +0530 Subject: ARM: OMAP3+: SmartReflex: class drivers should use struct omap_sr * Convert SmartReflex "class" functions to take a struct omap_sr *, rather than a struct voltagedomain *. SmartReflex code should be driver code and not tightly coupled to OMAP subarchitecture-specific structures. Based on Paul's original code for the SmartReflex driver conversion. Signed-off-by: Jean Pihet Signed-off-by: J Keerthy Reviewed-by: Kevin Hilman Signed-off-by: Kevin Hilman --- include/linux/power/smartreflex.h | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h index 69eb270c6297..4224698cf8bd 100644 --- a/include/linux/power/smartreflex.h +++ b/include/linux/power/smartreflex.h @@ -143,6 +143,29 @@ #define OMAP3430_SR_ERRWEIGHT 0x04 #define OMAP3430_SR_ERRMAXLIMIT 0x02 +struct omap_sr { + struct list_head node; + struct platform_device *pdev; + struct omap_sr_nvalue_table *nvalue_table; + struct voltagedomain *voltdm; + struct dentry *dbg_dir; + unsigned int irq; + int srid; + int ip_type; + int nvalue_count; + bool autocomp_active; + u32 clk_length; + u32 err_weight; + u32 err_minlimit; + u32 err_maxlimit; + u32 accum_data; + u32 senn_avgweight; + u32 senp_avgweight; + u32 senp_mod; + u32 senn_mod; + void __iomem *base; +}; + /** * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass * pmic specific info to smartreflex driver @@ -187,10 +210,10 @@ struct omap_smartreflex_dev_attr { * based decisions. */ struct omap_sr_class_data { - int (*enable)(struct voltagedomain *voltdm); - int (*disable)(struct voltagedomain *voltdm, int is_volt_reset); - int (*configure)(struct voltagedomain *voltdm); - int (*notify)(struct voltagedomain *voltdm, u32 status); + int (*enable)(struct omap_sr *sr); + int (*disable)(struct omap_sr *sr, int is_volt_reset); + int (*configure)(struct omap_sr *sr); + int (*notify)(struct omap_sr *sr, u32 status); u8 notify_flags; u8 class_type; }; -- cgit v1.2.3 From 8b765d727d711650ab3521411fd48a0d8f62a84c Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Tue, 24 Apr 2012 10:41:27 +0530 Subject: ARM: OMAP2+: smartreflex: Use the names from hwmod data instead of voltage domains. Associate a name with each SmartReflex instance from the hwmod data, rather than attempting to reuse the name of a voltage domain. The name from hwmod better reflects the smartreflex integration in the system. Also have the name passed to the drivers using pdata, which helps to remove any dependencies on SoC-specific structures. Signed-off-by: Jean Pihet Signed-off-by: J Keerthy Reviewed-by: Kevin Hilman Signed-off-by: Kevin Hilman --- include/linux/power/smartreflex.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h index 4224698cf8bd..884eaeea96be 100644 --- a/include/linux/power/smartreflex.h +++ b/include/linux/power/smartreflex.h @@ -144,6 +144,7 @@ #define OMAP3430_SR_ERRMAXLIMIT 0x02 struct omap_sr { + char *name; struct list_head node; struct platform_device *pdev; struct omap_sr_nvalue_table *nvalue_table; @@ -232,6 +233,7 @@ struct omap_sr_nvalue_table { /** * struct omap_sr_data - Smartreflex platform data. * + * @name: instance name * @ip_type: Smartreflex IP type. * @senp_mod: SENPENABLE value for the sr * @senn_mod: SENNENABLE value for sr @@ -243,6 +245,7 @@ struct omap_sr_nvalue_table { * @voltdm: Pointer to the voltage domain associated with the SR */ struct omap_sr_data { + const char *name; int ip_type; u32 senp_mod; u32 senn_mod; -- cgit v1.2.3 From 50e4a7d0b26c86628300edf4625cc5ff16a7a227 Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Tue, 24 Apr 2012 10:56:40 +0530 Subject: ARM: OMAP2+: SmartReflex: introduce a busy loop condition test macro Now that omap_test_timeout is only accessible from mach-omap2/, introduce a similar function for SR. This change makes the SmartReflex implementation ready for the move to drivers/. Signed-off-by: Jean Pihet Signed-off-by: J Keerthy Reviewed-by: Kevin Hilman Signed-off-by: Kevin Hilman --- include/linux/power/smartreflex.h | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h index 884eaeea96be..78b795ea2709 100644 --- a/include/linux/power/smartreflex.h +++ b/include/linux/power/smartreflex.h @@ -22,7 +22,7 @@ #include #include - +#include #include /* @@ -167,6 +167,27 @@ struct omap_sr { void __iomem *base; }; +/** + * test_cond_timeout - busy-loop, testing a condition + * @cond: condition to test until it evaluates to true + * @timeout: maximum number of microseconds in the timeout + * @index: loop index (integer) + * + * Loop waiting for @cond to become true or until at least @timeout + * microseconds have passed. To use, define some integer @index in the + * calling code. After running, if @index == @timeout, then the loop has + * timed out. + * + * Copied from omap_test_timeout */ +#define sr_test_cond_timeout(cond, timeout, index) \ +({ \ + for (index = 0; index < timeout; index++) { \ + if (cond) \ + break; \ + udelay(1); \ + } \ +}) + /** * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass * pmic specific info to smartreflex driver -- cgit v1.2.3 From 5e7f2e12e4ea14a34fb9b5941d60a4464fc8d40a Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Wed, 25 Apr 2012 11:19:44 +0530 Subject: ARM: OMAP2+: SmartReflex: Use per-OPP data structure The SmartReflex driver incorrectly treats some per-OPP data as data common to all OPPs (e.g., ERRMINLIMIT). Move this data into a per-OPP data structure. Furthermore, in order to make the SmartReflex implementation ready for the move to drivers/, remove the dependency from the SR driver code to the voltage layer by querying the data tables only from the SR device init code. Based on Paul's original code for the SmartReflex driver conversion. Signed-off-by: Jean Pihet Signed-off-by: J Keerthy Reviewed-by: Kevin Hilman Signed-off-by: Kevin Hilman --- include/linux/power/smartreflex.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h index 78b795ea2709..222f90183712 100644 --- a/include/linux/power/smartreflex.h +++ b/include/linux/power/smartreflex.h @@ -243,12 +243,16 @@ struct omap_sr_class_data { /** * struct omap_sr_nvalue_table - Smartreflex n-target value info * - * @efuse_offs: The offset of the efuse where n-target values are stored. - * @nvalue: The n-target value. + * @efuse_offs: The offset of the efuse where n-target values are stored. + * @nvalue: The n-target value. + * @errminlimit: The value of the ERRMINLIMIT bitfield for this n-target + * @volt_nominal: microvolts DC that the VDD is initially programmed to */ struct omap_sr_nvalue_table { u32 efuse_offs; u32 nvalue; + u32 errminlimit; + unsigned long volt_nominal; }; /** -- cgit v1.2.3 From 7fb149ffe357d6ad672cf9325181530b4c478a81 Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Tue, 24 Apr 2012 11:38:50 +0530 Subject: ARM: OMAP2+: SmartReflex: add POWER_AVS Kconfig options Add a Kconfig menu (POWER_AVS) and rename the Kconfig options for the OMAP SmartReflex implementation: CONFIG_OMAP_SMARTREFLEX renames to CONFIG_POWER_AVS_OMAP CONFIG_OMAP_SMARTREFLEX_CLASS3 renames to CONFIG_POWER_AVS_OMAP_CLASS3 This change makes the SmartReflex implementation ready for the move to drivers/. Signed-off-by: Jean Pihet Signed-off-by: J Keerthy Reviewed-by: Kevin Hilman Signed-off-by: Kevin Hilman --- include/linux/power/smartreflex.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h index 222f90183712..3101e62a1213 100644 --- a/include/linux/power/smartreflex.h +++ b/include/linux/power/smartreflex.h @@ -207,7 +207,7 @@ struct omap_smartreflex_dev_attr { const char *sensor_voltdm_name; }; -#ifdef CONFIG_OMAP_SMARTREFLEX +#ifdef CONFIG_POWER_AVS_OMAP /* * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR. * The smartreflex class driver should pass the class type. -- cgit v1.2.3 From 1aad779fccdbb4d79af7b9de93dfd2bfe807e052 Mon Sep 17 00:00:00 2001 From: Ola Lilja Date: Thu, 24 May 2012 15:26:03 +0200 Subject: ALSA: pcm: Add debug-print helper function Adds a function getting the stream-name as a string for a specific stream. Signed-off-by: Ola Lilja Reviewed-by: Takashi Iwai Signed-off-by: Mark Brown --- include/sound/pcm.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include') diff --git a/include/sound/pcm.h b/include/sound/pcm.h index 0d1112815be3..a55d5db7eb5a 100644 --- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -1073,4 +1073,15 @@ static inline void snd_pcm_limit_isa_dma_size(int dma, size_t *max) const char *snd_pcm_format_name(snd_pcm_format_t format); +/** + * Get a string naming the direction of a stream + */ +static inline const char *snd_pcm_stream_str(struct snd_pcm_substream *substream) +{ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + return "Playback"; + else + return "Capture"; +} + #endif /* __SOUND_PCM_H */ -- cgit v1.2.3 From d7e7eb91551ad99244b989d71d092cb0375648fa Mon Sep 17 00:00:00 2001 From: Ola Lilja Date: Thu, 24 May 2012 15:26:25 +0200 Subject: ASoC: core: Add widget SND_SOC_DAPM_CLOCK_SUPPLY Adds a supply-widget variant for connection to the clock-framework. This widget-type corresponds to the variant for regulators. Signed-off-by: Ola Lilja Signed-off-by: Mark Brown --- include/sound/soc-dapm.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include') diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index e3833d9f1914..05559e571d44 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -229,6 +229,10 @@ struct device; { .id = snd_soc_dapm_adc, .name = wname, .sname = stname, .reg = wreg, \ .shift = wshift, .invert = winvert, \ .event = wevent, .event_flags = wflags} +#define SND_SOC_DAPM_CLOCK_SUPPLY(wname) \ +{ .id = snd_soc_dapm_clock_supply, .name = wname, \ + .reg = SND_SOC_NOPM, .event = dapm_clock_event, \ + .event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD } /* generic widgets */ #define SND_SOC_DAPM_REG(wid, wname, wreg, wshift, wmask, won_val, woff_val) \ @@ -245,6 +249,7 @@ struct device; .reg = SND_SOC_NOPM, .shift = wdelay, .event = dapm_regulator_event, \ .event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD } + /* dapm kcontrol types */ #define SOC_DAPM_SINGLE(xname, reg, shift, max, invert) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ @@ -327,6 +332,8 @@ int dapm_reg_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event); int dapm_regulator_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event); +int dapm_clock_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event); /* dapm controls */ int snd_soc_dapm_put_volsw(struct snd_kcontrol *kcontrol, @@ -432,6 +439,7 @@ enum snd_soc_dapm_type { snd_soc_dapm_post, /* machine specific post widget - exec last */ snd_soc_dapm_supply, /* power/clock supply */ snd_soc_dapm_regulator_supply, /* external regulator */ + snd_soc_dapm_clock_supply, /* external clock */ snd_soc_dapm_aif_in, /* audio interface input */ snd_soc_dapm_aif_out, /* audio interface output */ snd_soc_dapm_siggen, /* signal generator */ @@ -537,6 +545,8 @@ struct snd_soc_dapm_widget { struct list_head dirty; int inputs; int outputs; + + struct clk *clk; }; struct snd_soc_dapm_update { -- cgit v1.2.3 From bc92657a11c0982783979bbb84ceaf58ba222124 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 25 May 2012 18:22:11 -0600 Subject: ASoC: make snd_soc_dai_link more symmetrical Prior to this patch, the CPU side of a DAI link was specified using a single name. Often, this was the result of calling dev_name() on the device providing the DAI, but in the case of a CPU DAI driver that provided multiple DAIs, it needed to mix together both the device name and some device-relative name, in order to form a single globally unique name. However, the CODEC side of the DAI link was specified using separate fields for device (name or OF node) and device-relative DAI name. This patch allows the CPU side of a DAI link to be specified in the same way as the CODEC side, separating concepts of device and device-relative DAI name. I believe this will be important in multi-codec and/or dynamic PCM scenarios, where a single CPU driver provides multiple DAIs, while also booting using device tree, with accompanying desire not to hard-code the CPU side device's name into the original .cpu_dai_name field. Ideally, both the CPU DAI and CODEC DAI loops in soc_bind_dai_link() would now be identical. However, two things prevent that at present: 1) The need to save rtd->codec for the CODEC side, which means we have to search for the CODEC explicitly, and not just the CODEC side DAI. 2) Since we know the CODEC side DAI is part of a codec, and not just a standalone DAI, it's slightly more efficient to convert .codec_name/ .codec_of_node into a codec first, and then compare each DAI's .codec field, since this avoids strcmp() on each DAI's CODEC's name within the loop. However, the two loops are essentially semantically equivalent. Signed-off-by: Stephen Warren Signed-off-by: Mark Brown --- include/sound/soc.h | 33 ++++++++++++++++++++++++++++----- 1 file changed, 28 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/sound/soc.h b/include/sound/soc.h index c703871f5f65..23c4efbe13a6 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -785,13 +785,36 @@ struct snd_soc_dai_link { /* config - must be set by machine driver */ const char *name; /* Codec name */ const char *stream_name; /* Stream name */ - const char *codec_name; /* for multi-codec */ - const struct device_node *codec_of_node; - const char *platform_name; /* for multi-platform */ - const struct device_node *platform_of_node; + /* + * You MAY specify the link's CPU-side device, either by device name, + * or by DT/OF node, but not both. If this information is omitted, + * the CPU-side DAI is matched using .cpu_dai_name only, which hence + * must be globally unique. These fields are currently typically used + * only for codec to codec links, or systems using device tree. + */ + const char *cpu_name; + const struct device_node *cpu_of_node; + /* + * You MAY specify the DAI name of the CPU DAI. If this information is + * omitted, the CPU-side DAI is matched using .cpu_name/.cpu_of_node + * only, which only works well when that device exposes a single DAI. + */ const char *cpu_dai_name; - const struct device_node *cpu_dai_of_node; + /* + * You MUST specify the link's codec, either by device name, or by + * DT/OF node, but not both. + */ + const char *codec_name; + const struct device_node *codec_of_node; + /* You MUST specify the DAI name within the codec */ const char *codec_dai_name; + /* + * You MAY specify the link's platform/PCM/DMA driver, either by + * device name, or by DT/OF node, but not both. Some forms of link + * do not need a platform. + */ + const char *platform_name; + const struct device_node *platform_of_node; int be_id; /* optional ID for machine driver BE identification */ const struct snd_soc_pcm_stream *params; -- cgit v1.2.3 From 6c9d8cf6372ed2995a3d982f5c1f966e842101cc Mon Sep 17 00:00:00 2001 From: Adam Thomson Date: Thu, 31 May 2012 15:18:01 +0100 Subject: ASoC: core: Add single controls with specified range of values Control type added for cases where a specific range of values within a register are required for control. Added convenience macros: SOC_SINGLE_RANGE SOC_SINGLE_RANGE_TLV Added accessor implementations: snd_soc_info_volsw_range snd_soc_put_volsw_range snd_soc_get_volsw_range Signed-off-by: Michal Hajduk Signed-off-by: Adam Thomson Signed-off-by: Mark Brown --- include/sound/soc.h | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'include') diff --git a/include/sound/soc.h b/include/sound/soc.h index 23c4efbe13a6..e4348d25fca3 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -47,6 +47,13 @@ .info = snd_soc_info_volsw, .get = snd_soc_get_volsw,\ .put = snd_soc_put_volsw, \ .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert) } +#define SOC_SINGLE_RANGE(xname, xreg, xshift, xmin, xmax, xinvert) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\ + .info = snd_soc_info_volsw_range, .get = snd_soc_get_volsw_range, \ + .put = snd_soc_put_volsw_range, \ + .private_value = (unsigned long)&(struct soc_mixer_control) \ + {.reg = xreg, .shift = xshift, .min = xmin,\ + .max = xmax, .platform_max = xmax, .invert = xinvert} } #define SOC_SINGLE_TLV(xname, reg, shift, max, invert, tlv_array) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\ @@ -67,6 +74,16 @@ {.reg = xreg, .rreg = xreg, \ .shift = xshift, .rshift = xshift, \ .max = xmax, .min = xmin} } +#define SOC_SINGLE_RANGE_TLV(xname, xreg, xshift, xmin, xmax, xinvert, tlv_array) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\ + .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\ + SNDRV_CTL_ELEM_ACCESS_READWRITE,\ + .tlv.p = (tlv_array), \ + .info = snd_soc_info_volsw_range, \ + .get = snd_soc_get_volsw_range, .put = snd_soc_put_volsw_range, \ + .private_value = (unsigned long)&(struct soc_mixer_control) \ + {.reg = xreg, .shift = xshift, .min = xmin,\ + .max = xmax, .platform_max = xmax, .invert = xinvert} } #define SOC_DOUBLE(xname, reg, shift_left, shift_right, max, invert) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\ .info = snd_soc_info_volsw, .get = snd_soc_get_volsw, \ @@ -460,6 +477,12 @@ int snd_soc_get_volsw_s8(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); int snd_soc_put_volsw_s8(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); +int snd_soc_info_volsw_range(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo); +int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol); +int snd_soc_get_volsw_range(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol); int snd_soc_limit_volume(struct snd_soc_codec *codec, const char *name, int max); int snd_soc_bytes_info(struct snd_kcontrol *kcontrol, -- cgit v1.2.3 From 141eba2e006dd8145bed2e49fae3de5af65ab9b0 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Thu, 24 May 2012 10:47:26 -0600 Subject: regmap: allow busses to request formatting with specific endianness Add a field to struct regmap_bus that allows bus drivers to request that register addresses and values be formatted with a specific endianness. The default endianness is unchanged from current operation: Big. Implement native endian formatting/parsing for 16- and 32-bit values. This will be enough to support regmap-mmio.c. Signed-off-by: Stephen Warren Signed-off-by: Mark Brown --- include/linux/regmap.h | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'include') diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 56af22ec9aba..26136b577009 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -43,6 +43,14 @@ struct reg_default { #ifdef CONFIG_REGMAP +enum regmap_endian { + /* Unspecified -> 0 -> Backwards compatible default */ + REGMAP_ENDIAN_DEFAULT = 0, + REGMAP_ENDIAN_BIG, + REGMAP_ENDIAN_LITTLE, + REGMAP_ENDIAN_NATIVE, +}; + /** * Configuration for the register map of a device. * @@ -84,6 +92,12 @@ struct reg_default { * @reg_defaults_raw: Power on reset values for registers (for use with * register cache support). * @num_reg_defaults_raw: Number of elements in reg_defaults_raw. + * @reg_format_endian: Endianness for formatted register addresses. If this is + * DEFAULT, the @reg_format_endian_default value from the + * regmap bus is used. + * @val_format_endian: Endianness for formatted register values. If this is + * DEFAULT, the @reg_format_endian_default value from the + * regmap bus is used. */ struct regmap_config { const char *name; @@ -109,6 +123,9 @@ struct regmap_config { u8 write_flag_mask; bool use_single_rw; + + enum regmap_endian reg_format_endian; + enum regmap_endian val_format_endian; }; typedef int (*regmap_hw_write)(void *context, const void *data, @@ -133,6 +150,12 @@ typedef void (*regmap_hw_free_context)(void *context); * data. * @read_flag_mask: Mask to be set in the top byte of the register when doing * a read. + * @reg_format_endian_default: Default endianness for formatted register + * addresses. Used when the regmap_config specifies DEFAULT. If this is + * DEFAULT, BIG is assumed. + * @val_format_endian_default: Default endianness for formatted register + * values. Used when the regmap_config specifies DEFAULT. If this is + * DEFAULT, BIG is assumed. */ struct regmap_bus { bool fast_io; @@ -141,6 +164,8 @@ struct regmap_bus { regmap_hw_read read; regmap_hw_free_context free_context; u8 read_flag_mask; + enum regmap_endian reg_format_endian_default; + enum regmap_endian val_format_endian_default; }; struct regmap *regmap_init(struct device *dev, -- cgit v1.2.3 From b026ddbbd25e3560c8d69beb96a5980d96c59b43 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 31 May 2012 21:01:46 +0100 Subject: regmap: Constify regmap_irq_chip We should never be modifying it and it lets drivers declare it const. Signed-off-by: Mark Brown --- include/linux/regmap.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 26136b577009..f9b624c83464 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -268,7 +268,7 @@ struct regmap_irq_chip { struct regmap_irq_chip_data; int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags, - int irq_base, struct regmap_irq_chip *chip, + int irq_base, const struct regmap_irq_chip *chip, struct regmap_irq_chip_data **data); void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *data); int regmap_irq_chip_get_base(struct regmap_irq_chip_data *data); -- cgit v1.2.3 From cffc9592fde309deafce12362e0a285108cfa3c8 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 20 May 2012 10:30:21 +0800 Subject: regulator: core: Allow drivers to set voltage mapping table in regulator_desc Some regulator hardware use table based mapping can set volt_table in regulator_desc and use regulator_list_voltage_table() for their list_voltage callback. Signed-off-by: Axel Lin Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index b0432cc2b169..80226383e561 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -170,6 +170,7 @@ enum regulator_type { * * @min_uV: Voltage given by the lowest selector (if linear mapping) * @uV_step: Voltage increase with each selector (if linear mapping) + * @volt_table: Voltage mapping table (if table based mapping) * * @vsel_reg: Register for selector when using regulator_regmap_X_voltage_ * @vsel_mask: Mask for register bitfield used for selector @@ -189,6 +190,8 @@ struct regulator_desc { unsigned int min_uV; unsigned int uV_step; + const unsigned int *volt_table; + unsigned int vsel_reg; unsigned int vsel_mask; unsigned int enable_reg; @@ -271,6 +274,8 @@ int regulator_mode_to_status(unsigned int); int regulator_list_voltage_linear(struct regulator_dev *rdev, unsigned int selector); +int regulator_list_voltage_table(struct regulator_dev *rdev, + unsigned int selector); int regulator_map_voltage_linear(struct regulator_dev *rdev, int min_uV, int max_uV); int regulator_map_voltage_iterate(struct regulator_dev *rdev, -- cgit v1.2.3 From d594e987c6f5417cc63dd7e107a2a03a7eeee03f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 4 Jun 2012 03:50:35 +0000 Subject: sock_diag: add SK_MEMINFO_BACKLOG Adding socket backlog len in INET_DIAG_SKMEMINFO is really useful to diagnose various TCP problems. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/sock_diag.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/sock_diag.h b/include/linux/sock_diag.h index db4bae78bda9..6793fac5eab5 100644 --- a/include/linux/sock_diag.h +++ b/include/linux/sock_diag.h @@ -18,6 +18,7 @@ enum { SK_MEMINFO_FWD_ALLOC, SK_MEMINFO_WMEM_QUEUED, SK_MEMINFO_OPTMEM, + SK_MEMINFO_BACKLOG, SK_MEMINFO_VARS, }; -- cgit v1.2.3 From 29a6b6c060445eb46528785d51a2d8b0e6d898c4 Mon Sep 17 00:00:00 2001 From: Raffaele Recalcati Date: Sun, 3 Jun 2012 10:43:43 +0000 Subject: net/ethernet: ks8851_mll mac address configuration support added Signed-off-by: Raffaele Recalcati Signed-off-by: David S. Miller --- include/linux/ks8851_mll.h | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 include/linux/ks8851_mll.h (limited to 'include') diff --git a/include/linux/ks8851_mll.h b/include/linux/ks8851_mll.h new file mode 100644 index 000000000000..e9ccfb59ed30 --- /dev/null +++ b/include/linux/ks8851_mll.h @@ -0,0 +1,33 @@ +/* + * ks8861_mll platform data struct definition + * Copyright (c) 2012 BTicino S.p.A. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _LINUX_KS8851_MLL_H +#define _LINUX_KS8851_MLL_H + +#include + +/** + * struct ks8851_mll_platform_data - Platform data of the KS8851_MLL network driver + * @macaddr: The MAC address of the device, set to all 0:s to use the on in + * the chip. + */ +struct ks8851_mll_platform_data { + u8 mac_addr[ETH_ALEN]; +}; + +#endif -- cgit v1.2.3 From ab73b751303bc60d7d9fba875c958dedfe14754c Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 10 Apr 2012 12:51:52 +0200 Subject: NFC: Export LLCP general bytes getter Signed-off-by: Samuel Ortiz --- include/net/nfc/nfc.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/net/nfc/nfc.h b/include/net/nfc/nfc.h index b7ca4a2a1d72..3116f923f607 100644 --- a/include/net/nfc/nfc.h +++ b/include/net/nfc/nfc.h @@ -188,6 +188,7 @@ struct sk_buff *nfc_alloc_recv_skb(unsigned int size, gfp_t gfp); int nfc_set_remote_general_bytes(struct nfc_dev *dev, u8 *gt, u8 gt_len); +u8 *nfc_get_local_general_bytes(struct nfc_dev *dev, size_t *gb_len); int nfc_targets_found(struct nfc_dev *dev, struct nfc_target *targets, int ntargets); -- cgit v1.2.3 From fe7c580073280c15bb4eb4f82bf20dddc1a68383 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 15 May 2012 15:57:06 +0200 Subject: NFC: Add target mode protocols to the polling loop startup routine Signed-off-by: Samuel Ortiz --- include/linux/nfc.h | 4 ++++ include/net/nfc/hci.h | 3 ++- include/net/nfc/nfc.h | 3 ++- include/net/nfc/shdlc.h | 3 ++- 4 files changed, 10 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/nfc.h b/include/linux/nfc.h index 0ae9b5857c83..548715881fb0 100644 --- a/include/linux/nfc.h +++ b/include/linux/nfc.h @@ -94,6 +94,8 @@ enum nfc_commands { * @NFC_ATTR_TARGET_SENSF_RES: NFC-F targets extra information, max 18 bytes * @NFC_ATTR_COMM_MODE: Passive or active mode * @NFC_ATTR_RF_MODE: Initiator or target + * @NFC_ATTR_IM_PROTOCOLS: Initiator mode protocols to poll for + * @NFC_ATTR_TM_PROTOCOLS: Target mode protocols to listen for */ enum nfc_attrs { NFC_ATTR_UNSPEC, @@ -109,6 +111,8 @@ enum nfc_attrs { NFC_ATTR_COMM_MODE, NFC_ATTR_RF_MODE, NFC_ATTR_DEVICE_POWERED, + NFC_ATTR_IM_PROTOCOLS, + NFC_ATTR_TM_PROTOCOLS, /* private: internal use only */ __NFC_ATTR_AFTER_LAST }; diff --git a/include/net/nfc/hci.h b/include/net/nfc/hci.h index 4467c9460857..e30e6a869714 100644 --- a/include/net/nfc/hci.h +++ b/include/net/nfc/hci.h @@ -31,7 +31,8 @@ struct nfc_hci_ops { void (*close) (struct nfc_hci_dev *hdev); int (*hci_ready) (struct nfc_hci_dev *hdev); int (*xmit) (struct nfc_hci_dev *hdev, struct sk_buff *skb); - int (*start_poll) (struct nfc_hci_dev *hdev, u32 protocols); + int (*start_poll) (struct nfc_hci_dev *hdev, + u32 im_protocols, u32 tm_protocols); int (*target_from_gate) (struct nfc_hci_dev *hdev, u8 gate, struct nfc_target *target); int (*complete_target_discovered) (struct nfc_hci_dev *hdev, u8 gate, diff --git a/include/net/nfc/nfc.h b/include/net/nfc/nfc.h index 3116f923f607..97aa0e81aa83 100644 --- a/include/net/nfc/nfc.h +++ b/include/net/nfc/nfc.h @@ -53,7 +53,8 @@ struct nfc_target; struct nfc_ops { int (*dev_up)(struct nfc_dev *dev); int (*dev_down)(struct nfc_dev *dev); - int (*start_poll)(struct nfc_dev *dev, u32 protocols); + int (*start_poll)(struct nfc_dev *dev, + u32 im_protocols, u32 tm_protocols); void (*stop_poll)(struct nfc_dev *dev); int (*dep_link_up)(struct nfc_dev *dev, struct nfc_target *target, u8 comm_mode, u8 *gb, size_t gb_len); diff --git a/include/net/nfc/shdlc.h b/include/net/nfc/shdlc.h index ab06afd462da..35e930d2f638 100644 --- a/include/net/nfc/shdlc.h +++ b/include/net/nfc/shdlc.h @@ -27,7 +27,8 @@ struct nfc_shdlc_ops { void (*close) (struct nfc_shdlc *shdlc); int (*hci_ready) (struct nfc_shdlc *shdlc); int (*xmit) (struct nfc_shdlc *shdlc, struct sk_buff *skb); - int (*start_poll) (struct nfc_shdlc *shdlc, u32 protocols); + int (*start_poll) (struct nfc_shdlc *shdlc, + u32 im_protocols, u32 tm_protocols); int (*target_from_gate) (struct nfc_shdlc *shdlc, u8 gate, struct nfc_target *target); int (*complete_target_discovered) (struct nfc_shdlc *shdlc, u8 gate, -- cgit v1.2.3 From fc40a8c1a06ab7db45da790693dd9802612a055c Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Fri, 1 Jun 2012 13:21:13 +0200 Subject: NFC: Add target mode activation netlink event Userspace gets a netlink event upon target mode activation. The LLCP layer is also signaled when we get an ATR_REQ in order to get the remote general bytes. Signed-off-by: Samuel Ortiz --- include/linux/nfc.h | 7 +++++++ include/net/nfc/nfc.h | 4 ++++ 2 files changed, 11 insertions(+) (limited to 'include') diff --git a/include/linux/nfc.h b/include/linux/nfc.h index 548715881fb0..d124e9273fcb 100644 --- a/include/linux/nfc.h +++ b/include/linux/nfc.h @@ -56,6 +56,10 @@ * %NFC_ATTR_PROTOCOLS) * @NFC_EVENT_DEVICE_REMOVED: event emitted when a device is removed * (it sends %NFC_ATTR_DEVICE_INDEX) + * @NFC_EVENT_TM_ACTIVATED: event emitted when the adapter is activated in + * target mode. + * @NFC_EVENT_DEVICE_DEACTIVATED: event emitted when the adapter is deactivated + * from target mode. */ enum nfc_commands { NFC_CMD_UNSPEC, @@ -71,6 +75,8 @@ enum nfc_commands { NFC_EVENT_DEVICE_ADDED, NFC_EVENT_DEVICE_REMOVED, NFC_EVENT_TARGET_LOST, + NFC_EVENT_TM_ACTIVATED, + NFC_EVENT_TM_DEACTIVATED, /* private: internal use only */ __NFC_CMD_AFTER_LAST }; @@ -122,6 +128,7 @@ enum nfc_attrs { #define NFC_NFCID1_MAXSIZE 10 #define NFC_SENSB_RES_MAXSIZE 12 #define NFC_SENSF_RES_MAXSIZE 18 +#define NFC_GB_MAXSIZE 48 /* NFC protocols */ #define NFC_PROTO_JEWEL 1 diff --git a/include/net/nfc/nfc.h b/include/net/nfc/nfc.h index 97aa0e81aa83..41573b4bd78a 100644 --- a/include/net/nfc/nfc.h +++ b/include/net/nfc/nfc.h @@ -198,4 +198,8 @@ int nfc_target_lost(struct nfc_dev *dev, u32 target_idx); int nfc_dep_link_is_up(struct nfc_dev *dev, u32 target_idx, u8 comm_mode, u8 rf_mode); +int nfc_tm_activated(struct nfc_dev *dev, u32 protocol, u8 comm_mode, + u8 *gb, size_t gb_len); +int nfc_tm_deactivated(struct nfc_dev *dev); + #endif /* __NET_NFC_H */ -- cgit v1.2.3 From f212ad5e993e7efb996fc8ce94a5de8f0bd06d41 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Thu, 31 May 2012 00:02:26 +0200 Subject: NFC: Set the NFC device RF mode appropriately Signed-off-by: Samuel Ortiz --- include/linux/nfc.h | 1 + include/net/nfc/nfc.h | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/nfc.h b/include/linux/nfc.h index d124e9273fcb..f4e6dd915b1c 100644 --- a/include/linux/nfc.h +++ b/include/linux/nfc.h @@ -146,6 +146,7 @@ enum nfc_attrs { /* NFC RF modes */ #define NFC_RF_INITIATOR 0 #define NFC_RF_TARGET 1 +#define NFC_RF_NONE 2 /* NFC protocols masks used in bitsets */ #define NFC_PROTO_JEWEL_MASK (1 << NFC_PROTO_JEWEL) diff --git a/include/net/nfc/nfc.h b/include/net/nfc/nfc.h index 41573b4bd78a..a6a7b49a3e2d 100644 --- a/include/net/nfc/nfc.h +++ b/include/net/nfc/nfc.h @@ -100,10 +100,10 @@ struct nfc_dev { int targets_generation; struct device dev; bool dev_up; + u8 rf_mode; bool polling; struct nfc_target *active_target; bool dep_link_up; - u32 dep_rf_mode; struct nfc_genl_data genl_data; u32 supported_protocols; -- cgit v1.2.3 From be9ae4ce4ee66e211815122ab4f41913efed4fec Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Wed, 16 May 2012 15:55:48 +0200 Subject: NFC: Introduce target mode tx ops And rename the initiator mode data exchange ops for consistency sake. Signed-off-by: Samuel Ortiz --- include/net/nfc/nfc.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/nfc/nfc.h b/include/net/nfc/nfc.h index a6a7b49a3e2d..45c4c970575c 100644 --- a/include/net/nfc/nfc.h +++ b/include/net/nfc/nfc.h @@ -63,9 +63,10 @@ struct nfc_ops { u32 protocol); void (*deactivate_target)(struct nfc_dev *dev, struct nfc_target *target); - int (*data_exchange)(struct nfc_dev *dev, struct nfc_target *target, + int (*im_transceive)(struct nfc_dev *dev, struct nfc_target *target, struct sk_buff *skb, data_exchange_cb_t cb, void *cb_context); + int (*tm_send)(struct nfc_dev *dev, struct sk_buff *skb); int (*check_presence)(struct nfc_dev *dev, struct nfc_target *target); }; -- cgit v1.2.3 From 73167ced31d15c04e57b9e0885ac05675e9195a4 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Thu, 31 May 2012 00:05:50 +0200 Subject: NFC: Introduce target mode rx data callback This routine will be called by drivers whenever they receive data in target mode. This should be unexpected events and as such should be handled by a standalone API (i.e. not as a callback pointer from an existing API). Signed-off-by: Samuel Ortiz --- include/net/nfc/nfc.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/net/nfc/nfc.h b/include/net/nfc/nfc.h index 45c4c970575c..180964b954ab 100644 --- a/include/net/nfc/nfc.h +++ b/include/net/nfc/nfc.h @@ -202,5 +202,6 @@ int nfc_dep_link_is_up(struct nfc_dev *dev, u32 target_idx, int nfc_tm_activated(struct nfc_dev *dev, u32 protocol, u8 comm_mode, u8 *gb, size_t gb_len); int nfc_tm_deactivated(struct nfc_dev *dev); +int nfc_tm_data_received(struct nfc_dev *dev, struct sk_buff *skb); #endif /* __NET_NFC_H */ -- cgit v1.2.3 From 2827011f666e157f3307d55070a75e1d1110b194 Mon Sep 17 00:00:00 2001 From: Mat Martineau Date: Thu, 17 May 2012 21:14:09 -0700 Subject: Bluetooth: Fix early return from l2cap_chan_del This fixes a regression from commit 2ead70b8390d199ca04cd35311b51f5f3676079e that is present in all kernels starting at v3.0. When L2CAP information was moved to struct l2cap_chan, a check was added to l2cap_chan_del to avoid certain cleanup operations when ERTM or streaming mode had not yet been initialized. The logic in the check did not take in to account that chan->conf_state is set to 0 in l2cap_chan_ready, so l2cap_chan_del failed to cancel timers and leaked memory any time the ERTM queues or lists were not empty. This change makes sure that l2cap_chan_del only returns early if ERTM initialization was not performed. Signed-off-by: Mat Martineau Signed-off-by: Marcel Holtmann --- include/net/bluetooth/l2cap.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h index 1c7d1cd5e679..452fcc4c0fff 100644 --- a/include/net/bluetooth/l2cap.h +++ b/include/net/bluetooth/l2cap.h @@ -597,6 +597,7 @@ enum { CONF_EWS_RECV, CONF_LOC_CONF_PEND, CONF_REM_CONF_PEND, + CONF_NOT_COMPLETE, }; #define L2CAP_CONF_MAX_CONF_REQ 2 -- cgit v1.2.3 From f5dbb0772df3feb2bb5eda8a9f0e0acdeb25653f Mon Sep 17 00:00:00 2001 From: Mat Martineau Date: Thu, 17 May 2012 20:53:38 -0700 Subject: Bluetooth: Remove receive code that has been superceded This deletes the receive code that had handlers for each frame type at the top level, and then had logic to determine the receive state within each handler. Signed-off-by: Mat Martineau Signed-off-by: Gustavo Padovan --- include/net/bluetooth/l2cap.h | 8 -------- 1 file changed, 8 deletions(-) (limited to 'include') diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h index 452fcc4c0fff..7d1da5a7d11e 100644 --- a/include/net/bluetooth/l2cap.h +++ b/include/net/bluetooth/l2cap.h @@ -419,11 +419,6 @@ struct l2cap_seq_list { #define L2CAP_SEQ_LIST_CLEAR 0xFFFF #define L2CAP_SEQ_LIST_TAIL 0x8000 -struct srej_list { - __u16 tx_seq; - struct list_head list; -}; - struct l2cap_chan { struct sock *sk; @@ -475,14 +470,12 @@ struct l2cap_chan { __u16 expected_ack_seq; __u16 expected_tx_seq; __u16 buffer_seq; - __u16 buffer_seq_srej; __u16 srej_save_reqseq; __u16 last_acked_seq; __u16 frames_sent; __u16 unacked_frames; __u8 retry_count; __u16 srej_queue_next; - __u8 num_acked; __u16 sdu_len; struct sk_buff *sdu; struct sk_buff *sdu_last_frag; @@ -515,7 +508,6 @@ struct l2cap_chan { struct sk_buff_head srej_q; struct l2cap_seq_list srej_list; struct l2cap_seq_list retrans_list; - struct list_head srej_l; struct list_head list; struct list_head global_l; -- cgit v1.2.3 From 4239d16f360ce4c8a1798508dd171ebce93985ba Mon Sep 17 00:00:00 2001 From: Mat Martineau Date: Thu, 17 May 2012 20:53:49 -0700 Subject: Bluetooth: Check rules when setting retransmit or monitor timers The ERTM specification requires the retransmit timer to be cancelled when the monitor timer is set. The retransmit timer cannot be set again while the monitor timer is pending. Signed-off-by: Mat Martineau Signed-off-by: Gustavo Padovan --- include/net/bluetooth/l2cap.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include') diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h index 7d1da5a7d11e..117db8e4a5f4 100644 --- a/include/net/bluetooth/l2cap.h +++ b/include/net/bluetooth/l2cap.h @@ -706,11 +706,7 @@ static inline bool l2cap_clear_timer(struct l2cap_chan *chan, #define __set_chan_timer(c, t) l2cap_set_timer(c, &c->chan_timer, (t)) #define __clear_chan_timer(c) l2cap_clear_timer(c, &c->chan_timer) -#define __set_retrans_timer(c) l2cap_set_timer(c, &c->retrans_timer, \ - msecs_to_jiffies(L2CAP_DEFAULT_RETRANS_TO)); #define __clear_retrans_timer(c) l2cap_clear_timer(c, &c->retrans_timer) -#define __set_monitor_timer(c) l2cap_set_timer(c, &c->monitor_timer, \ - msecs_to_jiffies(L2CAP_DEFAULT_MONITOR_TO)); #define __clear_monitor_timer(c) l2cap_clear_timer(c, &c->monitor_timer) #define __set_ack_timer(c) l2cap_set_timer(c, &chan->ack_timer, \ msecs_to_jiffies(L2CAP_DEFAULT_ACK_TO)); -- cgit v1.2.3 From 522cc2ee6e55ba49f4df338e0dfcfb989b46eb8c Mon Sep 17 00:00:00 2001 From: Mat Martineau Date: Thu, 17 May 2012 20:53:54 -0700 Subject: Bluetooth: Remove unused ERTM control field macros Now that l2cap_ctrl is used to set up control fields, these macros are not needed. Signed-off-by: Mat Martineau Signed-off-by: Gustavo Padovan --- include/net/bluetooth/l2cap.h | 168 ------------------------------------------ 1 file changed, 168 deletions(-) (limited to 'include') diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2