From 08458871b60c4bfe49973ce1c27a2b4bc4c159b0 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 21 Feb 2017 18:50:05 +0000 Subject: ASoC: Intel: Skylake: fix spelling mistake: "allocationf" -> "allocation" Trivial fix to spelling mistake in dev_err message. Signed-off-by: Colin Ian King Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-pcm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c index e12520e142ff..635cbb1e7d91 100644 --- a/sound/soc/intel/skylake/skl-pcm.c +++ b/sound/soc/intel/skylake/skl-pcm.c @@ -1165,7 +1165,7 @@ static int skl_pcm_new(struct snd_soc_pcm_runtime *rtd) snd_dma_pci_data(skl->pci), size, MAX_PREALLOC_SIZE); if (retval) { - dev_err(dai->dev, "dma buffer allocationf fail\n"); + dev_err(dai->dev, "dma buffer allocation fail\n"); return retval; } } -- cgit v1.2.3 From b3ec72ace939b0abd75d5d875e77cf0b777debb7 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 20 Feb 2017 19:46:10 +0200 Subject: ASoC: Intel: bdw-rt5677: Use devm_gpiod_get() Since index is always 0 replace devm_gpiod_get_index() by devm_gpiod_get() and apply proper flags. Signed-off-by: Andy Shevchenko Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/intel/boards/bdw-rt5677.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'sound') diff --git a/sound/soc/intel/boards/bdw-rt5677.c b/sound/soc/intel/boards/bdw-rt5677.c index 53c6b4cbb1e1..14d9693c1641 100644 --- a/sound/soc/intel/boards/bdw-rt5677.c +++ b/sound/soc/intel/boards/bdw-rt5677.c @@ -193,13 +193,12 @@ static int bdw_rt5677_init(struct snd_soc_pcm_runtime *rtd) RT5677_CLK_SEL_I2S1_ASRC); /* Request rt5677 GPIO for headphone amp control */ - bdw_rt5677->gpio_hp_en = devm_gpiod_get_index(codec->dev, - "headphone-enable", 0, 0); + bdw_rt5677->gpio_hp_en = devm_gpiod_get(codec->dev, "headphone-enable", + GPIOD_OUT_LOW); if (IS_ERR(bdw_rt5677->gpio_hp_en)) { dev_err(codec->dev, "Can't find HP_AMP_SHDN_L gpio\n"); return PTR_ERR(bdw_rt5677->gpio_hp_en); } - gpiod_direction_output(bdw_rt5677->gpio_hp_en, 0); /* Create and initialize headphone jack */ if (!snd_soc_card_jack_new(rtd->card, "Headphone Jack", -- cgit v1.2.3 From 31d648f051fe82c9d6c2176b1b5ee402b1a18f21 Mon Sep 17 00:00:00 2001 From: Jeeja KP Date: Fri, 17 Feb 2017 22:48:56 +0530 Subject: ASoC: Intel: bxtn: Store the FW/Library context at boot Store the DSP firmware/library at boot, so that for S3 to S0 transition use the stored ctx for downloading the firmware to DSP memory. Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/bxt-sst.c | 55 +++++++++++++++++++++++++-------------- 1 file changed, 36 insertions(+), 19 deletions(-) (limited to 'sound') diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c index 15a063a403cc..7762d5a18fce 100644 --- a/sound/soc/intel/skylake/bxt-sst.c +++ b/sound/soc/intel/skylake/bxt-sst.c @@ -50,33 +50,47 @@ static unsigned int bxt_get_errorcode(struct sst_dsp *ctx) return sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE); } +static void sst_bxt_release_library(struct skl_lib_info *linfo, int lib_count) +{ + int i; + + for (i = 1; i < lib_count; i++) { + if (linfo[i].fw) { + release_firmware(linfo[i].fw); + linfo[i].fw = NULL; + } + } +} + static int bxt_load_library(struct sst_dsp *ctx, struct skl_lib_info *linfo, int lib_count) { struct snd_dma_buffer dmab; struct skl_sst *skl = ctx->thread_context; - const struct firmware *fw = NULL; struct firmware stripped_fw; int ret = 0, i, dma_id, stream_tag; /* library indices start from 1 to N. 0 represents base FW */ for (i = 1; i < lib_count; i++) { - ret = request_firmware(&fw, linfo[i].name, ctx->dev); - if (ret < 0) { - dev_err(ctx->dev, "Request lib %s failed:%d\n", + if (linfo[i].fw == NULL) { + ret = request_firmware(&linfo[i].fw, linfo[i].name, + ctx->dev); + if (ret < 0) { + dev_err(ctx->dev, "Request lib %s failed:%d\n", linfo[i].name, ret); - return ret; + goto load_library_failed; + } } if (skl->is_first_boot) { - ret = snd_skl_parse_uuids(ctx, fw, + ret = snd_skl_parse_uuids(ctx, linfo[i].fw, BXT_ADSP_FW_BIN_HDR_OFFSET, i); if (ret < 0) goto load_library_failed; } - stripped_fw.data = fw->data; - stripped_fw.size = fw->size; + stripped_fw.data = linfo[i].fw->data; + stripped_fw.size = linfo[i].fw->size; skl_dsp_strip_extended_manifest(&stripped_fw); stream_tag = ctx->dsp_ops.prepare(ctx->dev, 0x40, @@ -99,14 +113,12 @@ bxt_load_library(struct sst_dsp *ctx, struct skl_lib_info *linfo, int lib_count) ctx->dsp_ops.trigger(ctx->dev, false, stream_tag); ctx->dsp_ops.cleanup(ctx->dev, &dmab, stream_tag); - release_firmware(fw); - fw = NULL; } return ret; load_library_failed: - release_firmware(fw); + sst_bxt_release_library(linfo, lib_count); return ret; } @@ -208,16 +220,14 @@ static int bxt_load_base_firmware(struct sst_dsp *ctx) struct skl_sst *skl = ctx->thread_context; int ret; - ret = request_firmware(&ctx->fw, ctx->fw_name, ctx->dev); - if (ret < 0) { - dev_err(ctx->dev, "Request firmware failed %d\n", ret); - goto sst_load_base_firmware_failed; + if (ctx->fw == NULL) { + ret = request_firmware(&ctx->fw, ctx->fw_name, ctx->dev); + if (ret < 0) { + dev_err(ctx->dev, "Request firmware failed %d\n", ret); + return ret; + } } - /* check for extended manifest */ - if (ctx->fw == NULL) - goto sst_load_base_firmware_failed; - /* prase uuids on first boot */ if (skl->is_first_boot) { ret = snd_skl_parse_uuids(ctx, ctx->fw, BXT_ADSP_FW_BIN_HDR_OFFSET, 0); @@ -265,8 +275,11 @@ static int bxt_load_base_firmware(struct sst_dsp *ctx) } } + return ret; + sst_load_base_firmware_failed: release_firmware(ctx->fw); + ctx->fw = NULL; return ret; } @@ -635,6 +648,10 @@ EXPORT_SYMBOL_GPL(bxt_sst_init_fw); void bxt_sst_dsp_cleanup(struct device *dev, struct skl_sst *ctx) { + + sst_bxt_release_library(ctx->lib_info, ctx->lib_count); + if (ctx->dsp->fw) + release_firmware(ctx->dsp->fw); skl_freeup_uuid_list(ctx); skl_ipc_free(&ctx->ipc); ctx->dsp->cl_dev.ops.cl_cleanup_controller(ctx->dsp); -- cgit v1.2.3 From 7d3f91dc1e4db18b644695c9442c62679a5dff6e Mon Sep 17 00:00:00 2001 From: Jeeja KP Date: Fri, 17 Feb 2017 22:48:57 +0530 Subject: ASoC: Intel: bxtn: optimize ROM init retries During S3->S0 transition, sometime ROM init fails because of authentication engine loads later than the OS. In this case driver waits for a longer period and then retries the FW download causing huge delay in resume time of audio device. To avoid this, ROM INIT wait time is set to a optimal value and increased the retries for firmware download. Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/bxt-sst.c | 27 ++++++++++++++++----------- 1 file changed, 16 insertions(+), 11 deletions(-) (limited to 'sound') diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c index 7762d5a18fce..d3be1be5a372 100644 --- a/sound/soc/intel/skylake/bxt-sst.c +++ b/sound/soc/intel/skylake/bxt-sst.c @@ -25,7 +25,8 @@ #include "skl-sst-ipc.h" #define BXT_BASEFW_TIMEOUT 3000 -#define BXT_INIT_TIMEOUT 500 +#define BXT_INIT_TIMEOUT 300 +#define BXT_ROM_INIT_TIMEOUT 70 #define BXT_IPC_PURGE_FW 0x01004000 #define BXT_ROM_INIT 0x5 @@ -45,6 +46,8 @@ /* Delay before scheduling D0i3 entry */ #define BXT_D0I3_DELAY 5000 +#define BXT_FW_ROM_INIT_RETRY 3 + static unsigned int bxt_get_errorcode(struct sst_dsp *ctx) { return sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE); @@ -185,7 +188,7 @@ static int sst_bxt_prepare_fw(struct sst_dsp *ctx, /* Step 7: Wait for ROM init */ ret = sst_dsp_register_poll(ctx, BXT_ADSP_FW_STATUS, SKL_FW_STS_MASK, - SKL_FW_INIT, BXT_INIT_TIMEOUT, "ROM Load"); + SKL_FW_INIT, BXT_ROM_INIT_TIMEOUT, "ROM Load"); if (ret < 0) { dev_err(ctx->dev, "Timeout for ROM init, ret:%d\n", ret); goto base_fw_load_failed; @@ -218,7 +221,7 @@ static int bxt_load_base_firmware(struct sst_dsp *ctx) { struct firmware stripped_fw; struct skl_sst *skl = ctx->thread_context; - int ret; + int ret, i; if (ctx->fw == NULL) { ret = request_firmware(&ctx->fw, ctx->fw_name, ctx->dev); @@ -239,18 +242,20 @@ static int bxt_load_base_firmware(struct sst_dsp *ctx) stripped_fw.size = ctx->fw->size; skl_dsp_strip_extended_manifest(&stripped_fw); - ret = sst_bxt_prepare_fw(ctx, stripped_fw.data, stripped_fw.size); - /* Retry Enabling core and ROM load. Retry seemed to help */ - if (ret < 0) { + + for (i = 0; i < BXT_FW_ROM_INIT_RETRY; i++) { ret = sst_bxt_prepare_fw(ctx, stripped_fw.data, stripped_fw.size); - if (ret < 0) { - dev_err(ctx->dev, "Error code=0x%x: FW status=0x%x\n", + if (ret == 0) + break; + } + + if (ret < 0) { + dev_err(ctx->dev, "Error code=0x%x: FW status=0x%x\n", sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE), sst_dsp_shim_read(ctx, BXT_ADSP_FW_STATUS)); - dev_err(ctx->dev, "Core En/ROM load fail:%d\n", ret); - goto sst_load_base_firmware_failed; - } + dev_err(ctx->dev, "Core En/ROM load fail:%d\n", ret); + goto sst_load_base_firmware_failed; } ret = sst_transfer_fw_host_dma(ctx); -- cgit v1.2.3 From 8e15e762cddf68a401df5c6aa45da3c27712e856 Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Mon, 6 Mar 2017 16:12:22 +0900 Subject: ASoC: Intel: Skylake: use a helper macro to rounding-up calculation In 'include/linux/kernel.h', there's a helper macro to round numerical value. Let's use it. Signed-off-by: Takashi Sakamoto Acked-by: Vinod Koul Tested-by: Subhransu S. Prusty Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-topology.c | 18 ++++-------------- 1 file changed, 4 insertions(+), 14 deletions(-) (limited to 'sound') diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index ed58b5b3555a..17a9a55026a4 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -299,8 +299,6 @@ static void skl_tplg_update_buffer_size(struct skl_sst *ctx, { int multiplier = 1; struct skl_module_fmt *in_fmt, *out_fmt; - int in_rate, out_rate; - /* Since fixups is applied to pin 0 only, ibs, obs needs * change for pin 0 only @@ -311,21 +309,13 @@ static void skl_tplg_update_buffer_size(struct skl_sst *ctx, if (mcfg->m_type == SKL_MODULE_TYPE_SRCINT) multiplier = 5; - if (in_fmt->s_freq % 1000) - in_rate = (in_fmt->s_freq / 1000) + 1; - else - in_rate = (in_fmt->s_freq / 1000); - - mcfg->ibs = in_rate * (mcfg->in_fmt->channels) * + mcfg->ibs = DIV_ROUND_UP(in_fmt->s_freq, 1000) * + (mcfg->in_fmt->channels) * (mcfg->in_fmt->bit_depth >> 3) * multiplier; - if (mcfg->out_fmt->s_freq % 1000) - out_rate = (mcfg->out_fmt->s_freq / 1000) + 1; - else - out_rate = (mcfg->out_fmt->s_freq / 1000); - - mcfg->obs = out_rate * (mcfg->out_fmt->channels) * + mcfg->obs = DIV_ROUND_UP(mcfg->out_fmt->s_freq, 1000) * + (mcfg->out_fmt->channels) * (mcfg->out_fmt->bit_depth >> 3) * multiplier; } -- cgit v1.2.3 From 998d6fb5123d5b27edd3abd85b767c822bf766fc Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Wed, 8 Mar 2017 17:47:02 +0900 Subject: ASoC: Intel: Skylake: code cleanup for pin fixup limitation As a commit 4cd9899f0d16 ("ASoC: Intel: Skylake: Add multiple pin formats") describes, 'fixups is applied to pin 0 only'. On the other hand, the commit left some codes as what they were. This might confuses readers. This commit fixes the issue. This doesn't change driver behaviour at all. Fixes: 4cd9899f0d16 ("ASoC: Intel: Skylake: Add multiple pin formats") Signed-off-by: Takashi Sakamoto Acked-by: Vinod Koul Tested-by: Subhransu S. Prusty Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-topology.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'sound') diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index 17a9a55026a4..e7836a2e18f0 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -310,13 +310,11 @@ static void skl_tplg_update_buffer_size(struct skl_sst *ctx, multiplier = 5; mcfg->ibs = DIV_ROUND_UP(in_fmt->s_freq, 1000) * - (mcfg->in_fmt->channels) * - (mcfg->in_fmt->bit_depth >> 3) * + in_fmt->channels * (in_fmt->bit_depth >> 3) * multiplier; - mcfg->obs = DIV_ROUND_UP(mcfg->out_fmt->s_freq, 1000) * - (mcfg->out_fmt->channels) * - (mcfg->out_fmt->bit_depth >> 3) * + mcfg->obs = DIV_ROUND_UP(out_fmt->s_freq, 1000) * + out_fmt->channels * (out_fmt->bit_depth >> 3) * multiplier; } -- cgit v1.2.3 From 82cf89de2c9c2efcafde452ed76f85e7ef7f6ce0 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Thu, 9 Mar 2017 18:18:59 -0600 Subject: ASoC: Intel: add machine driver for BYT/CHT + DA7213 Add new machine driver, tested with Ard-Audio-DA7212 [1] connected to MinnowBoardMAX Turbot. The MCLK is managed by the codec driver using the "mclk" handle to reuse existing code, but it could just as well be handled by this machine driver. [1] http://www.dialog-semiconductor.com/content/ard-audio-da7212 Signed-off-by: Pierre-Louis Bossart Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/Kconfig | 12 ++ sound/soc/intel/boards/Makefile | 2 + sound/soc/intel/boards/bytcht_da7213.c | 283 +++++++++++++++++++++++++++++++++ 3 files changed, 297 insertions(+) create mode 100644 sound/soc/intel/boards/bytcht_da7213.c (limited to 'sound') diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig index 526855ad479e..8d32fc336eb8 100644 --- a/sound/soc/intel/Kconfig +++ b/sound/soc/intel/Kconfig @@ -202,6 +202,18 @@ config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH platforms with MAX98090 audio codec it also can support TI jack chip as aux device. If unsure select "N". +config SND_SOC_INTEL_BYT_CHT_DA7213_MACH + tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with DA7212/7213 codec" + depends on X86_INTEL_LPSS && I2C && ACPI + select SND_SOC_DA7213 + select SND_SST_ATOM_HIFI2_PLATFORM + select SND_SST_IPC_ACPI + select SND_SOC_INTEL_SST_MATCH if ACPI + help + This adds support for ASoC machine driver for Intel(R) Baytrail & CherryTrail + platforms with DA7212/7213 audio codec. + If unsure select "N". + config SND_SOC_INTEL_SKYLAKE tristate select SND_HDA_EXT_CORE diff --git a/sound/soc/intel/boards/Makefile b/sound/soc/intel/boards/Makefile index 5639f10774e6..8a5d9edd16ee 100644 --- a/sound/soc/intel/boards/Makefile +++ b/sound/soc/intel/boards/Makefile @@ -10,6 +10,7 @@ snd-soc-sst-bytcr-rt5651-objs := bytcr_rt5651.o snd-soc-sst-cht-bsw-rt5672-objs := cht_bsw_rt5672.o snd-soc-sst-cht-bsw-rt5645-objs := cht_bsw_rt5645.o snd-soc-sst-cht-bsw-max98090_ti-objs := cht_bsw_max98090_ti.o +snd-soc-sst-byt-cht-da7213-objs := bytcht_da7213.o snd-soc-skl_rt286-objs := skl_rt286.o snd-skl_nau88l25_max98357a-objs := skl_nau88l25_max98357a.o snd-soc-skl_nau88l25_ssm4567-objs := skl_nau88l25_ssm4567.o @@ -26,6 +27,7 @@ obj-$(CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH) += snd-soc-sst-bytcr-rt5651.o obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH) += snd-soc-sst-cht-bsw-rt5672.o obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH) += snd-soc-sst-cht-bsw-rt5645.o obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH) += snd-soc-sst-cht-bsw-max98090_ti.o +obj-$(CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH) += snd-soc-sst-byt-cht-da7213.o obj-$(CONFIG_SND_SOC_INTEL_SKL_RT286_MACH) += snd-soc-skl_rt286.o obj-$(CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH) += snd-skl_nau88l25_max98357a.o obj-$(CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH) += snd-soc-skl_nau88l25_ssm4567.o diff --git a/sound/soc/intel/boards/bytcht_da7213.c b/sound/soc/intel/boards/bytcht_da7213.c new file mode 100644 index 000000000000..18873e23f404 --- /dev/null +++ b/sound/soc/intel/boards/bytcht_da7213.c @@ -0,0 +1,283 @@ +/* + * bytcht-da7213.c - ASoc Machine driver for Intel Baytrail and + * Cherrytrail-based platforms, with Dialog DA7213 codec + * + * Copyright (C) 2017 Intel Corporation + * Author: Pierre-Louis Bossart + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "../../codecs/da7213.h" +#include "../atom/sst-atom-controls.h" +#include "../common/sst-acpi.h" + +static const struct snd_kcontrol_new controls[] = { + SOC_DAPM_PIN_SWITCH("Headphone Jack"), + SOC_DAPM_PIN_SWITCH("Headset Mic"), + SOC_DAPM_PIN_SWITCH("Mic"), + SOC_DAPM_PIN_SWITCH("Aux In"), +}; + +static const struct snd_soc_dapm_widget dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_MIC("Headset Mic", NULL), + SND_SOC_DAPM_MIC("Mic", NULL), + SND_SOC_DAPM_LINE("Aux In", NULL), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + {"Headphone Jack", NULL, "HPL"}, + {"Headphone Jack", NULL, "HPR"}, + + {"AUXL", NULL, "Aux In"}, + {"AUXR", NULL, "Aux In"}, + + /* Assume Mic1 is linked to Headset and Mic2 to on-board mic */ + {"MIC1", NULL, "Headset Mic"}, + {"MIC2", NULL, "Mic"}, + + /* SOC-codec link */ + {"ssp2 Tx", NULL, "codec_out0"}, + {"ssp2 Tx", NULL, "codec_out1"}, + {"codec_in0", NULL, "ssp2 Rx"}, + {"codec_in1", NULL, "ssp2 Rx"}, + + {"Playback", NULL, "ssp2 Tx"}, + {"ssp2 Rx", NULL, "Capture"}, +}; + +static int codec_fixup(struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_hw_params *params) +{ + int ret; + struct snd_interval *rate = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_RATE); + struct snd_interval *channels = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_CHANNELS); + + /* The DSP will convert the FE rate to 48k, stereo, 24bits */ + rate->min = rate->max = 48000; + channels->min = channels->max = 2; + + /* set SSP2 to 24-bit */ + params_set_format(params, SNDRV_PCM_FORMAT_S24_LE); + + /* + * Default mode for SSP configuration is TDM 4 slot, override config + * with explicit setting to I2S 2ch 24-bit. The word length is set with + * dai_set_tdm_slot() since there is no other API exposed + */ + ret = snd_soc_dai_set_fmt(rtd->cpu_dai, + SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) { + dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret); + return ret; + } + + ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, 24); + if (ret < 0) { + dev_err(rtd->dev, "can't set I2S config, err %d\n", ret); + return ret; + } + + return 0; +} + +static int aif1_startup(struct snd_pcm_substream *substream) +{ + return snd_pcm_hw_constraint_single(substream->runtime, + SNDRV_PCM_HW_PARAM_RATE, 48000); +} + +static int aif1_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + int ret; + + ret = snd_soc_dai_set_sysclk(codec_dai, DA7213_CLKSRC_MCLK, + 19200000, SND_SOC_CLOCK_IN); + if (ret < 0) + dev_err(codec_dai->dev, "can't set codec sysclk configuration\n"); + + ret = snd_soc_dai_set_pll(codec_dai, 0, + DA7213_SYSCLK_PLL_SRM, 0, DA7213_PLL_FREQ_OUT_98304000); + if (ret < 0) { + dev_err(codec_dai->dev, "failed to start PLL: %d\n", ret); + return -EIO; + } + + return ret; +} + +static int aif1_hw_free(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + int ret; + + ret = snd_soc_dai_set_pll(codec_dai, 0, + DA7213_SYSCLK_MCLK, 0, 0); + if (ret < 0) { + dev_err(codec_dai->dev, "failed to stop PLL: %d\n", ret); + return -EIO; + } + + return ret; +} + +static const struct snd_soc_ops aif1_ops = { + .startup = aif1_startup, +}; + +static const struct snd_soc_ops ssp2_ops = { + .hw_params = aif1_hw_params, + .hw_free = aif1_hw_free, + +}; + +static struct snd_soc_dai_link dailink[] = { + [MERR_DPCM_AUDIO] = { + .name = "Audio Port", + .stream_name = "Audio", + .cpu_dai_name = "media-cpu-dai", + .codec_dai_name = "snd-soc-dummy-dai", + .codec_name = "snd-soc-dummy", + .platform_name = "sst-mfld-platform", + .nonatomic = true, + .dynamic = 1, + .dpcm_playback = 1, + .dpcm_capture = 1, + .ops = &aif1_ops, + }, + [MERR_DPCM_DEEP_BUFFER] = { + .name = "Deep-Buffer Audio Port", + .stream_name = "Deep-Buffer Audio", + .cpu_dai_name = "deepbuffer-cpu-dai", + .codec_dai_name = "snd-soc-dummy-dai", + .codec_name = "snd-soc-dummy", + .platform_name = "sst-mfld-platform", + .nonatomic = true, + .dynamic = 1, + .dpcm_playback = 1, + .ops = &aif1_ops, + }, + [MERR_DPCM_COMPR] = { + .name = "Compressed Port", + .stream_name = "Compress", + .cpu_dai_name = "compress-cpu-dai", + .codec_dai_name = "snd-soc-dummy-dai", + .codec_name = "snd-soc-dummy", + .platform_name = "sst-mfld-platform", + }, + /* CODEC<->CODEC link */ + /* back ends */ + { + .name = "SSP2-Codec", + .id = 1, + .cpu_dai_name = "ssp2-port", + .platform_name = "sst-mfld-platform", + .no_pcm = 1, + .codec_dai_name = "da7213-hifi", + .codec_name = "i2c-DLGS7213:00", + .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBS_CFS, + .be_hw_params_fixup = codec_fixup, + .nonatomic = true, + .dpcm_playback = 1, + .dpcm_capture = 1, + .ops = &ssp2_ops, + }, +}; + +/* SoC card */ +static struct snd_soc_card bytcht_da7213_card = { + .name = "bytcht-da7213", + .owner = THIS_MODULE, + .dai_link = dailink, + .num_links = ARRAY_SIZE(dailink), + .controls = controls, + .num_controls = ARRAY_SIZE(controls), + .dapm_widgets = dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(dapm_widgets), + .dapm_routes = audio_map, + .num_dapm_routes = ARRAY_SIZE(audio_map), +}; + +static char codec_name[16]; /* i2c-:00 with HID being 8 chars */ + +static int bytcht_da7213_probe(struct platform_device *pdev) +{ + int ret_val = 0; + int i; + struct snd_soc_card *card; + struct sst_acpi_mach *mach; + const char *i2c_name = NULL; + int dai_index = 0; + + mach = (&pdev->dev)->platform_data; + card = &bytcht_da7213_card; + card->dev = &pdev->dev; + + /* fix index of codec dai */ + dai_index = MERR_DPCM_COMPR + 1; + for (i = 0; i < ARRAY_SIZE(dailink); i++) { + if (!strcmp(dailink[i].codec_name, "i2c-DLGS7213:00")) { + dai_index = i; + break; + } + } + + /* fixup codec name based on HID */ + i2c_name = sst_acpi_find_name_from_hid(mach->id); + if (i2c_name != NULL) { + snprintf(codec_name, sizeof(codec_name), + "%s%s", "i2c-", i2c_name); + dailink[dai_index].codec_name = codec_name; + } + + ret_val = devm_snd_soc_register_card(&pdev->dev, card); + if (ret_val) { + dev_err(&pdev->dev, + "snd_soc_register_card failed %d\n", ret_val); + return ret_val; + } + platform_set_drvdata(pdev, card); + return ret_val; +} + +static struct platform_driver bytcht_da7213_driver = { + .driver = { + .name = "bytcht_da7213", + }, + .probe = bytcht_da7213_probe, +}; +module_platform_driver(bytcht_da7213_driver); + +MODULE_DESCRIPTION("ASoC Intel(R) Baytrail/Cherrytrail+DA7213 Machine driver"); +MODULE_AUTHOR("Pierre-Louis Bossart"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:bytcht_da7213"); -- cgit v1.2.3 From a63b8a117d39ba1b979daa71c6ab350a043694f5 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Thu, 9 Mar 2017 18:19:00 -0600 Subject: ASoC: Intel: Atom: enable BYT/CHT+DA7213 machine driver Add entries in HID table and reference to bytcht_da7213 driver Signed-off-by: Pierre-Louis Bossart Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/atom/sst/sst_acpi.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'sound') diff --git a/sound/soc/intel/atom/sst/sst_acpi.c b/sound/soc/intel/atom/sst/sst_acpi.c index 747c0f393d2d..b24bf08606ae 100644 --- a/sound/soc/intel/atom/sst/sst_acpi.c +++ b/sound/soc/intel/atom/sst/sst_acpi.c @@ -480,6 +480,10 @@ static struct sst_acpi_mach sst_acpi_bytcr[] = { &byt_rvp_platform_data }, {"10EC5651", "bytcr_rt5651", "intel/fw_sst_0f28.bin", "bytcr_rt5651", NULL, &byt_rvp_platform_data }, + {"DLGS7212", "bytcht_da7213", "intel/fw_sst_0f28.bin", "bytcht_da7213", NULL, + &byt_rvp_platform_data }, + {"DLGS7213", "bytcht_da7213", "intel/fw_sst_0f28.bin", "bytcht_da7213", NULL, + &byt_rvp_platform_data }, /* some Baytrail platforms rely on RT5645, use CHT machine driver */ {"10EC5645", "cht-bsw-rt5645", "intel/fw_sst_0f28.bin", "cht-bsw", NULL, &byt_rvp_platform_data }, @@ -504,6 +508,10 @@ static struct sst_acpi_mach sst_acpi_chv[] = { {"193C9890", "cht-bsw-max98090", "intel/fw_sst_22a8.bin", "cht-bsw", NULL, &chv_platform_data }, + {"DLGS7212", "bytcht_da7213", "intel/fw_sst_22a8.bin", "bytcht_da7213", NULL, + &chv_platform_data }, + {"DLGS7213", "bytcht_da7213", "intel/fw_sst_22a8.bin", "bytcht_da7213", NULL, + &chv_platform_data }, /* some CHT-T platforms rely on RT5640, use Baytrail machine driver */ {"10EC5640", "bytcr_rt5640", "intel/fw_sst_22a8.bin", "bytcr_rt5640", cht_quirk, &chv_platform_data }, -- cgit v1.2.3 From 759db1c4660b558345573c7476a45c76a6aa07d2 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Thu, 9 Mar 2017 18:19:01 -0600 Subject: ASoC: Intel: boards: add card for MinnowBoardMax/Up I2S access Add card with dummy codec and DAI to make I2S signals observable. Uses Mic and Speaker pins/widgets to control DAPM Signed-off-by: Pierre-Louis Bossart Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/Kconfig | 12 ++ sound/soc/intel/boards/Makefile | 2 + sound/soc/intel/boards/bytcht_nocodec.c | 208 ++++++++++++++++++++++++++++++++ 3 files changed, 222 insertions(+) create mode 100644 sound/soc/intel/boards/bytcht_nocodec.c (limited to 'sound') diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig index 8d32fc336eb8..67968ef3bbda 100644 --- a/sound/soc/intel/Kconfig +++ b/sound/soc/intel/Kconfig @@ -214,6 +214,18 @@ config SND_SOC_INTEL_BYT_CHT_DA7213_MACH platforms with DA7212/7213 audio codec. If unsure select "N". +config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH + tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)" + depends on X86_INTEL_LPSS && I2C && ACPI + select SND_SST_ATOM_HIFI2_PLATFORM + select SND_SST_IPC_ACPI + select SND_SOC_INTEL_SST_MATCH if ACPI + help + This adds support for ASoC machine driver for the MinnowBoard Max or + Up boards and provides access to I2S signals on the Low-Speed + connector + If unsure select "N". + config SND_SOC_INTEL_SKYLAKE tristate select SND_HDA_EXT_CORE diff --git a/sound/soc/intel/boards/Makefile b/sound/soc/intel/boards/Makefile index 8a5d9edd16ee..56896e09445d 100644 --- a/sound/soc/intel/boards/Makefile +++ b/sound/soc/intel/boards/Makefile @@ -11,6 +11,7 @@ snd-soc-sst-cht-bsw-rt5672-objs := cht_bsw_rt5672.o snd-soc-sst-cht-bsw-rt5645-objs := cht_bsw_rt5645.o snd-soc-sst-cht-bsw-max98090_ti-objs := cht_bsw_max98090_ti.o snd-soc-sst-byt-cht-da7213-objs := bytcht_da7213.o +snd-soc-sst-byt-cht-nocodec-objs := bytcht_nocodec.o snd-soc-skl_rt286-objs := skl_rt286.o snd-skl_nau88l25_max98357a-objs := skl_nau88l25_max98357a.o snd-soc-skl_nau88l25_ssm4567-objs := skl_nau88l25_ssm4567.o @@ -28,6 +29,7 @@ obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH) += snd-soc-sst-cht-bsw-rt5672.o obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH) += snd-soc-sst-cht-bsw-rt5645.o obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH) += snd-soc-sst-cht-bsw-max98090_ti.o obj-$(CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH) += snd-soc-sst-byt-cht-da7213.o +obj-$(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH) += snd-soc-sst-byt-cht-nocodec.o obj-$(CONFIG_SND_SOC_INTEL_SKL_RT286_MACH) += snd-soc-skl_rt286.o obj-$(CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH) += snd-skl_nau88l25_max98357a.o obj-$(CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH) += snd-soc-skl_nau88l25_ssm4567.o diff --git a/sound/soc/intel/boards/bytcht_nocodec.c b/sound/soc/intel/boards/bytcht_nocodec.c new file mode 100644 index 000000000000..89853eeaaf9d --- /dev/null +++ b/sound/soc/intel/boards/bytcht_nocodec.c @@ -0,0 +1,208 @@ +/* + * bytcht_nocodec.c - ASoc Machine driver for MinnowBoard Max and Up + * to make I2S signals observable on the Low-Speed connector. Audio codec + * is not managed by ASoC/DAPM + * + * Copyright (C) 2015-2017 Intel Corp + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#include +#include +#include +#include +#include "../atom/sst-atom-controls.h" + +static const struct snd_soc_dapm_widget widgets[] = { + SND_SOC_DAPM_MIC("Mic", NULL), + SND_SOC_DAPM_SPK("Speaker", NULL), +}; + +static const struct snd_kcontrol_new controls[] = { + SOC_DAPM_PIN_SWITCH("Mic"), + SOC_DAPM_PIN_SWITCH("Speaker"), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + {"ssp2 Tx", NULL, "codec_out0"}, + {"ssp2 Tx", NULL, "codec_out1"}, + {"codec_in0", NULL, "ssp2 Rx"}, + {"codec_in1", NULL, "ssp2 Rx"}, + + {"ssp2 Rx", NULL, "Mic"}, + {"Speaker", NULL, "ssp2 Tx"}, +}; + +static int codec_fixup(struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_hw_params *params) +{ + struct snd_interval *rate = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_RATE); + struct snd_interval *channels = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_CHANNELS); + int ret; + + /* The DSP will convert the FE rate to 48k, stereo, 24bits */ + rate->min = rate->max = 48000; + channels->min = channels->max = 2; + + /* set SSP2 to 24-bit */ + params_set_format(params, SNDRV_PCM_FORMAT_S24_LE); + + /* + * Default mode for SSP configuration is TDM 4 slot, override config + * with explicit setting to I2S 2ch 24-bit. The word length is set with + * dai_set_tdm_slot() since there is no other API exposed + */ + ret = snd_soc_dai_set_fmt(rtd->cpu_dai, + SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS); + + if (ret < 0) { + dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret); + return ret; + } + + ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, 24); + if (ret < 0) { + dev_err(rtd->dev, "can't set I2S config, err %d\n", ret); + return ret; + } + + return 0; +} + +static unsigned int rates_48000[] = { + 48000, +}; + +static struct snd_pcm_hw_constraint_list constraints_48000 = { + .count = ARRAY_SIZE(rates_48000), + .list = rates_48000, +}; + +static int aif1_startup(struct snd_pcm_substream *substream) +{ + return snd_pcm_hw_constraint_list(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, + &constraints_48000); +} + +static struct snd_soc_ops aif1_ops = { + .startup = aif1_startup, +}; + +static struct snd_soc_dai_link dais[] = { + [MERR_DPCM_AUDIO] = { + .name = "Audio Port", + .stream_name = "Audio", + .cpu_dai_name = "media-cpu-dai", + .codec_dai_name = "snd-soc-dummy-dai", + .codec_name = "snd-soc-dummy", + .platform_name = "sst-mfld-platform", + .ignore_suspend = 1, + .nonatomic = true, + .dynamic = 1, + .dpcm_playback = 1, + .dpcm_capture = 1, + .ops = &aif1_ops, + }, + [MERR_DPCM_DEEP_BUFFER] = { + .name = "Deep-Buffer Audio Port", + .stream_name = "Deep-Buffer Audio", + .cpu_dai_name = "deepbuffer-cpu-dai", + .codec_dai_name = "snd-soc-dummy-dai", + .codec_name = "snd-soc-dummy", + .platform_name = "sst-mfld-platform", + .ignore_suspend = 1, + .nonatomic = true, + .dynamic = 1, + .dpcm_playback = 1, + .ops = &aif1_ops, + }, + [MERR_DPCM_COMPR] = { + .name = "Compressed Port", + .stream_name = "Compress", + .cpu_dai_name = "compress-cpu-dai", + .codec_dai_name = "snd-soc-dummy-dai", + .codec_name = "snd-soc-dummy", + .platform_name = "sst-mfld-platform", + }, + /* CODEC<->CODEC link */ + /* back ends */ + { + .name = "SSP2-LowSpeed Connector", + .id = 1, + .cpu_dai_name = "ssp2-port", + .platform_name = "sst-mfld-platform", + .no_pcm = 1, + .codec_dai_name = "snd-soc-dummy-dai", + .codec_name = "snd-soc-dummy", + .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBS_CFS, + .be_hw_params_fixup = codec_fixup, + .ignore_suspend = 1, + .nonatomic = true, + .dpcm_playback = 1, + .dpcm_capture = 1, + }, +}; + +/* SoC card */ +static struct snd_soc_card bytcht_nocodec_card = { + .name = "bytcht-nocodec", + .owner = THIS_MODULE, + .dai_link = dais, + .num_links = ARRAY_SIZE(dais), + .dapm_widgets = widgets, + .num_dapm_widgets = ARRAY_SIZE(widgets), + .dapm_routes = audio_map, + .num_dapm_routes = ARRAY_SIZE(audio_map), + .controls = controls, + .num_controls = ARRAY_SIZE(controls), + .fully_routed = true, +}; + +static int snd_bytcht_nocodec_mc_probe(struct platform_device *pdev) +{ + int ret_val = 0; + + /* register the soc card */ + bytcht_nocodec_card.dev = &pdev->dev; + + ret_val = devm_snd_soc_register_card(&pdev->dev, &bytcht_nocodec_card); + + if (ret_val) { + dev_err(&pdev->dev, "devm_snd_soc_register_card failed %d\n", + ret_val); + return ret_val; + } + platform_set_drvdata(pdev, &bytcht_nocodec_card); + return ret_val; +} + +static struct platform_driver snd_bytcht_nocodec_mc_driver = { + .driver = { + .name = "bytcht_nocodec", + }, + .probe = snd_bytcht_nocodec_mc_probe, +}; +module_platform_driver(snd_bytcht_nocodec_mc_driver); + +MODULE_DESCRIPTION("ASoC Intel(R) Baytrail/Cherrytrail Nocodec Machine driver"); +MODULE_AUTHOR("Pierre-Louis Bossart "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:bytcht_nocodec"); -- cgit v1.2.3 From a9b6567d03196dc73ace1c34925c7496fb194447 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Thu, 9 Mar 2017 18:19:02 -0600 Subject: ASoC: Intel: Enable bytcht_nocodec machine driver Make sure this machine driver is only used if enabled explicitly and if there is no information found in the SSDT. Signed-off-by: Pierre-Louis Bossart Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/atom/sst/sst_acpi.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/soc/intel/atom/sst/sst_acpi.c b/sound/soc/intel/atom/sst/sst_acpi.c index b24bf08606ae..18fe46ef6ac7 100644 --- a/sound/soc/intel/atom/sst/sst_acpi.c +++ b/sound/soc/intel/atom/sst/sst_acpi.c @@ -489,7 +489,14 @@ static struct sst_acpi_mach sst_acpi_bytcr[] = { &byt_rvp_platform_data }, {"10EC5648", "cht-bsw-rt5645", "intel/fw_sst_0f28.bin", "cht-bsw", NULL, &byt_rvp_platform_data }, - +#if IS_ENABLED(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH) + /* + * This is always last in the table so that it is selected only when + * enabled explicitly and there is no codec-related information in SSDT + */ + {"80860F28", "bytcht_nocodec", "intel/fw_sst_0f28.bin", "bytcht_nocodec", NULL, + &byt_rvp_platform_data }, +#endif {}, }; @@ -520,6 +527,14 @@ static struct sst_acpi_mach sst_acpi_chv[] = { /* some CHT-T platforms rely on RT5651, use Baytrail machine driver */ {"10EC5651", "bytcr_rt5651", "intel/fw_sst_22a8.bin", "bytcr_rt5651", NULL, &chv_platform_data }, +#if IS_ENABLED(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH) + /* + * This is always last in the table so that it is selected only when + * enabled explicitly and there is no codec-related information in SSDT + */ + {"808622A8", "bytcht_nocodec", "intel/fw_sst_22a8.bin", "bytcht_nocodec", NULL, + &chv_platform_data }, +#endif {}, }; -- cgit v1.2.3 From 6914968b8203aef72edf936319c4d46c6d46401b Mon Sep 17 00:00:00 2001 From: Jeeja KP Date: Mon, 13 Mar 2017 22:11:23 +0530 Subject: ASoC: Intel: Skylake: Fix to delete DSP pipe after stopping pipe DSP pipe needs to stopped before deleting the pipe. Currently check is for pipe state > STARTED, which is incorrect. So changed to include pipe state STARTED to stop the pipe if it started. Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-messages.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/soc/intel/skylake/skl-messages.c b/sound/soc/intel/skylake/skl-messages.c index e66870474f10..ed576965cacc 100644 --- a/sound/soc/intel/skylake/skl-messages.c +++ b/sound/soc/intel/skylake/skl-messages.c @@ -1098,7 +1098,7 @@ int skl_delete_pipe(struct skl_sst *ctx, struct skl_pipe *pipe) dev_dbg(ctx->dev, "%s: pipe = %d\n", __func__, pipe->ppl_id); /* If pipe is started, do stop the pipe in FW. */ - if (pipe->state > SKL_PIPE_STARTED) { + if (pipe->state >= SKL_PIPE_STARTED) { ret = skl_set_pipe_state(ctx, pipe, PPL_PAUSED); if (ret < 0) { dev_err(ctx->dev, "Failed to stop pipeline\n"); -- cgit v1.2.3 From 3b563e0a8406bf47cd39ca59f8453b3d968d996a Mon Sep 17 00:00:00 2001 From: Guneshwor Singh Date: Mon, 13 Mar 2017 22:11:24 +0530 Subject: ASoC: Intel: Skylake: Fix not to stop src pipe in pre pmd event handler If the widget is a mixin module, just unbind between source and sink and don't stop the source pipe as there can be multiple sinks connected. Signed-off-by: Guneshwor Singh Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-topology.c | 9 --------- 1 file changed, 9 deletions(-) (limited to 'sound') diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index e7836a2e18f0..d4058d2a8023 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -973,15 +973,6 @@ static int skl_tplg_mixer_dapm_pre_pmd_event(struct snd_soc_dapm_widget *w, src_mconfig = sink_mconfig->m_in_pin[i].tgt_mcfg; if (!src_mconfig) continue; - /* - * If path_found == 1, that means pmd for source - * pipe has not occurred, source is connected to - * some other sink. so its responsibility of sink - * to unbind itself from source. - */ - ret = skl_stop_pipe(ctx, src_mconfig->pipe); - if (ret < 0) - return ret; ret = skl_unbind_modules(ctx, src_mconfig, sink_mconfig); -- cgit v1.2.3 From 5518af9f97940e84de6a4bf6fed212a95278f818 Mon Sep 17 00:00:00 2001 From: Jeeja KP Date: Mon, 13 Mar 2017 22:11:25 +0530 Subject: ASoC: Intel: bxtn: Disable interrupt when DSP is in D3 When DSP is in D3, no interrupts are expected, so disable interrupt while entering D3. Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/bxt-sst.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'sound') diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c index d3be1be5a372..b34c96508605 100644 --- a/sound/soc/intel/skylake/bxt-sst.c +++ b/sound/soc/intel/skylake/bxt-sst.c @@ -537,6 +537,11 @@ static int bxt_set_dsp_D3(struct sst_dsp *ctx, unsigned int core_id) "Failed to set DSP to D3:core id = %d;Continue reset\n", core_id); + if (core_id == SKL_DSP_CORE0_ID) { + /* disable Interrupt */ + skl_ipc_op_int_disable(ctx); + skl_ipc_int_disable(ctx); + } ret = skl_dsp_disable_core(ctx, core_mask); if (ret < 0) { dev_err(ctx->dev, "Failed to disable core %d\n", ret); -- cgit v1.2.3 From 1fb344a33a2f99378128281df97770e2c5182c2d Mon Sep 17 00:00:00 2001 From: Jeeja KP Date: Mon, 13 Mar 2017 22:11:26 +0530 Subject: ASoC: Intel: bxtn: Update DSP core state in D0 In system suspend, firmware needs to be re-downloaded as IMR is cleared. When firmware is downloaded in D0, core state is not set to running state causing instability with subsequent D0-D3 cycles. So set the core state correctly during D0 and check the DSP core state if not in reset to set the DSP to D3. Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/bxt-sst.c | 1 + sound/soc/intel/skylake/skl-sst-dsp.c | 6 ++++-- 2 files changed, 5 insertions(+), 2 deletions(-) (limited to 'sound') diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c index b34c96508605..2a2bb944cd40 100644 --- a/sound/soc/intel/skylake/bxt-sst.c +++ b/sound/soc/intel/skylake/bxt-sst.c @@ -446,6 +446,7 @@ static int bxt_set_dsp_D0(struct sst_dsp *ctx, unsigned int core_id) return ret; } } + skl->cores.state[core_id] = SKL_DSP_RUNNING; return ret; } diff --git a/sound/soc/intel/skylake/skl-sst-dsp.c b/sound/soc/intel/skylake/skl-sst-dsp.c index c3deefab65d6..08332723c700 100644 --- a/sound/soc/intel/skylake/skl-sst-dsp.c +++ b/sound/soc/intel/skylake/skl-sst-dsp.c @@ -355,12 +355,13 @@ int skl_dsp_get_core(struct sst_dsp *ctx, unsigned int core_id) ret = ctx->fw_ops.set_state_D0(ctx, core_id); if (ret < 0) { dev_err(ctx->dev, "unable to get core%d\n", core_id); - return ret; + goto out; } } skl->cores.usage_count[core_id]++; +out: dev_dbg(ctx->dev, "core id %d state %d usage_count %d\n", core_id, skl->cores.state[core_id], skl->cores.usage_count[core_id]); @@ -379,7 +380,8 @@ int skl_dsp_put_core(struct sst_dsp *ctx, unsigned int core_id) return -EINVAL; } - if (--skl->cores.usage_count[core_id] == 0) { + if ((--skl->cores.usage_count[core_id] == 0) && + (skl->cores.state[core_id] != SKL_DSP_RESET)) { ret = ctx->fw_ops.set_state_D3(ctx, core_id); if (ret < 0) { dev_err(ctx->dev, "unable to put core %d: %d\n", -- cgit v1.2.3 From 03de8c2ef82fae29d53de7eb86b0ca10501499fc Mon Sep 17 00:00:00 2001 From: Jeeja KP Date: Mon, 13 Mar 2017 22:11:27 +0530 Subject: ASoC: Intel: bxtn: Reload the firmware in case of D3 failure If D3 IPC fails or times out, firmware needs to be reloaded as driver continues the reset. So set the fw_load flag to false to reload the firmware in D0. Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/bxt-sst.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c index 2a2bb944cd40..600d95891996 100644 --- a/sound/soc/intel/skylake/bxt-sst.c +++ b/sound/soc/intel/skylake/bxt-sst.c @@ -533,10 +533,16 @@ static int bxt_set_dsp_D3(struct sst_dsp *ctx, unsigned int core_id) ret = skl_ipc_set_dx(&skl->ipc, BXT_INSTANCE_ID, BXT_BASE_FW_MODULE_ID, &dx); - if (ret < 0) + if (ret < 0) { dev_err(ctx->dev, "Failed to set DSP to D3:core id = %d;Continue reset\n", core_id); + /* + * In case of D3 failure, re-download the firmware, so set + * fw_loaded to false. + */ + skl->fw_loaded = false; + } if (core_id == SKL_DSP_CORE0_ID) { /* disable Interrupt */ -- cgit v1.2.3 From 3643ff10d48140a283d2e50c0e0a47f290cc3e4d Mon Sep 17 00:00:00 2001 From: Jeeja KP Date: Mon, 13 Mar 2017 22:11:28 +0530 Subject: ASoC: Intel: Skylake: Remove BE prepare ops Remove BE prepare ops which enables MCLK by default. If MCLK is required to be enabled for any specific platform, it needs to be enabled in the corresponding machine driver. Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-pcm.c | 18 ------------------ 1 file changed, 18 deletions(-) (limited to 'sound') diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c index 635cbb1e7d91..e3d206d50f3e 100644 --- a/sound/soc/intel/skylake/skl-pcm.c +++ b/sound/soc/intel/skylake/skl-pcm.c @@ -262,23 +262,6 @@ static int skl_pcm_open(struct snd_pcm_substream *substream, return 0; } -static int skl_be_prepare(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct skl *skl = get_skl_ctx(dai->dev); - struct skl_sst *ctx = skl->skl_sst; - struct skl_module_cfg *mconfig; - - if (dai->playback_widget->power || dai->capture_widget->power) - return 0; - - mconfig = skl_tplg_be_get_cpr_module(dai, substream->stream); - if (mconfig == NULL) - return -EINVAL; - - return skl_dsp_set_dma_control(ctx, mconfig); -} - static int skl_pcm_prepare(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { @@ -649,7 +632,6 @@ static struct snd_soc_dai_ops skl_dmic_dai_ops = { static struct snd_soc_dai_ops skl_be_ssp_dai_ops = { .hw_params = skl_be_hw_params, - .prepare = skl_be_prepare, }; static struct snd_soc_dai_ops skl_link_dai_ops = { -- cgit v1.2.3 From cb729d80b5c556acf38f1f04a1f0550472a75987 Mon Sep 17 00:00:00 2001 From: G Kranthi Date: Mon, 13 Mar 2017 22:11:29 +0530 Subject: ASoC: Intel: Skylake: Disable notifications at boot after DSP FW init DSP firmware sends notification every 1ms, which is disabled in runtime suspend. But if a system has no runtime pm, we keep getting notification, so disable after FW init as well. Signed-off-by: G Kranthi Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-messages.c | 2 +- sound/soc/intel/skylake/skl-pcm.c | 1 + sound/soc/intel/skylake/skl-sst-dsp.h | 2 ++ 3 files changed, 4 insertions(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/soc/intel/skylake/skl-messages.c b/sound/soc/intel/skylake/skl-messages.c index ed576965cacc..29523ddcfab0 100644 --- a/sound/soc/intel/skylake/skl-messages.c +++ b/sound/soc/intel/skylake/skl-messages.c @@ -58,7 +58,7 @@ static int skl_free_dma_buf(struct device *dev, struct snd_dma_buffer *dmab) #define NOTIFICATION_MASK 0xf /* disable notfication for underruns/overruns from firmware module */ -static void skl_dsp_enable_notification(struct skl_sst *ctx, bool enable) +void skl_dsp_enable_notification(struct skl_sst *ctx, bool enable) { struct notification_mask mask; struct skl_ipc_large_config_msg msg = {0}; diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c index e3d206d50f3e..2f90bc40be77 100644 --- a/sound/soc/intel/skylake/skl-pcm.c +++ b/sound/soc/intel/skylake/skl-pcm.c @@ -1214,6 +1214,7 @@ static int skl_platform_soc_probe(struct snd_soc_platform *platform) } skl_populate_modules(skl); skl->skl_sst->update_d0i3c = skl_update_d0i3c; + skl_dsp_enable_notification(skl->skl_sst, false); } pm_runtime_mark_last_busy(platform->dev); pm_runtime_put_autosuspend(platform->dev); diff --git a/sound/soc/intel/skylake/skl-sst-dsp.h b/sound/soc/intel/skylake/skl-sst-dsp.h index 849410d0823e..e8d1e149e0cd 100644 --- a/sound/soc/intel/skylake/skl-sst-dsp.h +++ b/sound/soc/intel/skylake/skl-sst-dsp.h @@ -235,4 +235,6 @@ int skl_get_pvt_instance_id_map(struct skl_sst *ctx, void skl_freeup_uuid_list(struct skl_sst *ctx); int skl_dsp_strip_extended_manifest(struct firmware *fw); +void skl_dsp_enable_notification(struct skl_sst *ctx, bool enable); + #endif /*__SKL_SST_DSP_H__*/ -- cgit v1.2.3 From 7bd86a30599de479bd863e18472207337485d339 Mon Sep 17 00:00:00 2001 From: G Kranthi Date: Mon, 13 Mar 2017 22:11:30 +0530 Subject: ASoC: Intel: Skylake: Remove get dsp_ops in cleanup routine dsp ops is already set in init, so use this in cleanup routine instead of again retrieving it. Also constify struct skl_dsp_ops. Signed-off-by: G Kranthi Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-messages.c | 8 ++------ sound/soc/intel/skylake/skl-sst-ipc.h | 2 ++ 2 files changed, 4 insertions(+), 6 deletions(-) (limited to 'sound') diff --git a/sound/soc/intel/skylake/skl-messages.c b/sound/soc/intel/skylake/skl-messages.c index 29523ddcfab0..ba1ec973ded7 100644 --- a/sound/soc/intel/skylake/skl-messages.c +++ b/sound/soc/intel/skylake/skl-messages.c @@ -274,6 +274,7 @@ int skl_init_dsp(struct skl *skl) if (ret < 0) return ret; + skl->skl_sst->dsp_ops = ops; dev_dbg(bus->dev, "dsp registration status=%d\n", ret); return ret; @@ -284,16 +285,11 @@ int skl_free_dsp(struct skl *skl) struct hdac_ext_bus *ebus = &skl->ebus; struct hdac_bus *bus = ebus_to_hbus(ebus); struct skl_sst *ctx = skl->skl_sst; - const struct skl_dsp_ops *ops; /* disable ppcap interrupt */ snd_hdac_ext_bus_ppcap_int_enable(&skl->ebus, false); - ops = skl_get_dsp_ops(skl->pci->device); - if (!ops) - return -EIO; - - ops->cleanup(bus->dev, ctx); + ctx->dsp_ops->cleanup(bus->dev, ctx); if (ctx->dsp->addr.lpe) iounmap(ctx->dsp->addr.lpe); diff --git a/sound/soc/intel/skylake/skl-sst-ipc.h b/sound/soc/intel/skylake/skl-sst-ipc.h index 9660ace379ab..7d21f055328d 100644 --- a/sound/soc/intel/skylake/skl-sst-ipc.h +++ b/sound/soc/intel/skylake/skl-sst-ipc.h @@ -105,6 +105,8 @@ struct skl_sst { void (*update_d0i3c)(struct device *dev, bool enable); struct skl_d0i3_data d0i3; + + const struct skl_dsp_ops *dsp_ops; }; struct skl_ipc_init_instance_msg { -- cgit v1.2.3 From b7d0254c51f3ce79a8931690e8a2f035208f6b55 Mon Sep 17 00:00:00 2001 From: Jeeja KP Date: Mon, 13 Mar 2017 22:11:31 +0530 Subject: ASoC: Intel: Skylake: Fix module load when module size > DMA buffer size When module size > DMA buffer size, driver copies first chunk and waits for the BDL complete interrupt. BDL complete interrupt never occurs and wait time expires as module load IPC is not send to start the DMA from DSP. To fix the above issue need to follow the below steps: 1. After copying the first chunk, send the module load IPC to start the DMA. 2. Wait for the BDL interrupt. Once interrupt is received, copy the next chunk. 3. Continue step 2 till all bytes are copied. 4. When all the bytes are copied (bytes_left = 0), wait for module load IPC response 5. Handled module load IPC response messages, check the load module IPC response and wake up the thread to complete module load. Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-sst-cldma.c | 26 ++++++++----- sound/soc/intel/skylake/skl-sst-cldma.h | 2 +- sound/soc/intel/skylake/skl-sst-dsp.h | 1 + sound/soc/intel/skylake/skl-sst-ipc.c | 66 ++++++++++++++++++++++----------- sound/soc/intel/skylake/skl-sst-ipc.h | 5 +++ sound/soc/intel/skylake/skl-sst.c | 53 ++++++++++++++++++++------ 6 files changed, 110 insertions(+), 43 deletions(-) (limited to 'sound') diff --git a/sound/soc/intel/skylake/skl-sst-cldma.c b/sound/soc/intel/skylake/skl-sst-cldma.c index c9f6d87381db..d2b1d60fec02 100644 --- a/sound/soc/intel/skylake/skl-sst-cldma.c +++ b/sound/soc/intel/skylake/skl-sst-cldma.c @@ -164,7 +164,7 @@ static void skl_cldma_cleanup(struct sst_dsp *ctx) ctx->dsp_ops.free_dma_buf(ctx->dev, &ctx->cl_dev.dmab_bdl); } -static int skl_cldma_wait_interruptible(struct sst_dsp *ctx) +int skl_cldma_wait_interruptible(struct sst_dsp *ctx) { int ret = 0; @@ -243,9 +243,14 @@ static void skl_cldma_fill_buffer(struct sst_dsp *ctx, unsigned int size, * 2. Polling on fw register to identify if data left to transferred doesn't * fill the ring buffer. Caller takes care of polling the required status * register to identify the transfer status. + * 3. if wait flag is set, waits for DBL interrupt to copy the next chunk till + * bytes_left is 0. + * if wait flag is not set, doesn't wait for BDL interrupt. after ccopying + * the first chunk return the no of bytes_left to be copied. */ static int -skl_cldma_copy_to_buf(struct sst_dsp *ctx, const void *bin, u32 total_size) +skl_cldma_copy_to_buf(struct sst_dsp *ctx, const void *bin, + u32 total_size, bool wait) { int ret = 0; bool start = true; @@ -272,13 +277,14 @@ skl_cldma_copy_to_buf(struct sst_dsp *ctx, const void *bin, u32 total_size) size = ctx->cl_dev.bufsize; skl_cldma_fill_buffer(ctx, size, curr_pos, true, start); - start = false; - ret = skl_cldma_wait_interruptible(ctx); - if (ret < 0) { - skl_cldma_stop(ctx); - return ret; + if (wait) { + start = false; + ret = skl_cldma_wait_interruptible(ctx); + if (ret < 0) { + skl_cldma_stop(ctx); + return ret; + } } - } else { skl_cldma_int_disable(ctx); @@ -298,9 +304,11 @@ skl_cldma_copy_to_buf(struct sst_dsp *ctx, const void *bin, u32 total_size) } bytes_left -= size; curr_pos = curr_pos + size; + if (!wait) + return bytes_left; } - return ret; + return bytes_left; } void skl_cldma_process_intr(struct sst_dsp *ctx) diff --git a/sound/soc/intel/skylake/skl-sst-cldma.h b/sound/soc/intel/skylake/skl-sst-cldma.h index 99e4c86b6358..5b730a1a0ae4 100644 --- a/sound/soc/intel/skylake/skl-sst-cldma.h +++ b/sound/soc/intel/skylake/skl-sst-cldma.h @@ -213,7 +213,7 @@ struct skl_cl_dev_ops { void (*cl_trigger)(struct sst_dsp *ctx, bool enable); void (*cl_cleanup_controller)(struct sst_dsp *ctx); int (*cl_copy_to_dmabuf)(struct sst_dsp *ctx, - const void *bin, u32 size); + const void *bin, u32 size, bool wait); void (*cl_stop_dma)(struct sst_dsp *ctx); }; diff --git a/sound/soc/intel/skylake/skl-sst-dsp.h b/sound/soc/intel/skylake/skl-sst-dsp.h index e8d1e149e0cd..5d7a93aa5bed 100644 --- a/sound/soc/intel/skylake/skl-sst-dsp.h +++ b/sound/soc/intel/skylake/skl-sst-dsp.h @@ -186,6 +186,7 @@ struct skl_module_table { void skl_cldma_process_intr(struct sst_dsp *ctx); void skl_cldma_int_disable(struct sst_dsp *ctx); int skl_cldma_prepare(struct sst_dsp *ctx); +int skl_cldma_wait_interruptible(struct sst_dsp *ctx); void skl_dsp_set_state_locked(struct sst_dsp *ctx, int state); struct sst_dsp *skl_dsp_ctx_init(struct device *dev, diff --git a/sound/soc/intel/skylake/skl-sst-ipc.c b/sound/soc/intel/skylake/skl-sst-ipc.c index e1391dfbc9e9..e90fe2c0bf2c 100644 --- a/sound/soc/intel/skylake/skl-sst-ipc.c +++ b/sound/soc/intel/skylake/skl-sst-ipc.c @@ -34,6 +34,11 @@ #define IPC_GLB_REPLY_STATUS_MASK ((0x1 << IPC_GLB_REPLY_STATUS_SHIFT) - 1) #define IPC_GLB_REPLY_STATUS(x) ((x) << IPC_GLB_REPLY_STATUS_SHIFT) +#define IPC_GLB_REPLY_TYPE_SHIFT 29 +#define IPC_GLB_REPLY_TYPE_MASK 0x1F +#define IPC_GLB_REPLY_TYPE(x) (((x) >> IPC_GLB_REPLY_TYPE_SHIFT) \ + & IPC_GLB_RPLY_TYPE_MASK) + #define IPC_TIMEOUT_MSECS 3000 #define IPC_EMPTY_LIST_SIZE 8 @@ -387,12 +392,27 @@ static int skl_ipc_process_notification(struct sst_generic_ipc *ipc, return 0; } +static int skl_ipc_set_reply_error_code(u32 reply) +{ + switch (reply) { + case IPC_GLB_REPLY_OUT_OF_MEMORY: + return -ENOMEM; + + case IPC_GLB_REPLY_BUSY: + return -EBUSY; + + default: + return -EINVAL; + } +} + static void skl_ipc_process_reply(struct sst_generic_ipc *ipc, struct skl_ipc_header header) { struct ipc_message *msg; u32 reply = header.primary & IPC_GLB_REPLY_STATUS_MASK; u64 *ipc_header = (u64 *)(&header); + struct skl_sst *skl = container_of(ipc, struct skl_sst, ipc); msg = skl_ipc_reply_get_msg(ipc, *ipc_header); if (msg == NULL) { @@ -401,33 +421,37 @@ static void skl_ipc_process_reply(struct sst_generic_ipc *ipc, } /* first process the header */ - switch (reply) { - case IPC_GLB_REPLY_SUCCESS: + if (reply == IPC_GLB_REPLY_SUCCESS) { dev_dbg(ipc->dev, "ipc FW reply %x: success\n", header.primary); /* copy the rx data from the mailbox */ sst_dsp_inbox_read(ipc->dsp, msg->rx_data, msg->rx_size); - break; - - case IPC_GLB_REPLY_OUT_OF_MEMORY: - dev_err(ipc->dev, "ipc fw reply: %x: no memory\n", header.primary); - msg->errno = -ENOMEM; - break; - - case IPC_GLB_REPLY_BUSY: - dev_err(ipc->dev, "ipc fw reply: %x: Busy\n", header.primary); - msg->errno = -EBUSY; - break; + switch (IPC_GLB_NOTIFY_MSG_TYPE(header.primary)) { + case IPC_GLB_LOAD_MULTIPLE_MODS: + skl->mod_load_complete = true; + skl->mod_load_status = true; + wake_up(&skl->mod_load_wait); + break; - default: - dev_err(ipc->dev, "Unknown ipc reply: 0x%x\n", reply); - msg->errno = -EINVAL; - break; - } + default: + break; - if (reply != IPC_GLB_REPLY_SUCCESS) { + } + } else { + msg->errno = skl_ipc_set_reply_error_code(reply); dev_err(ipc->dev, "ipc FW reply: reply=%d\n", reply); dev_err(ipc->dev, "FW Error Code: %u\n", ipc->dsp->fw_ops.get_fw_errcode(ipc->dsp)); + switch (IPC_GLB_NOTIFY_MSG_TYPE(header.primary)) { + case IPC_GLB_LOAD_MULTIPLE_MODS: + skl->mod_load_complete = true; + skl->mod_load_status = false; + wake_up(&skl->mod_load_wait); + break; + + default: + break; + + } } list_del(&msg->list); @@ -811,8 +835,8 @@ int skl_ipc_load_modules(struct sst_generic_ipc *ipc, header.primary |= IPC_GLB_TYPE(IPC_GLB_LOAD_MULTIPLE_MODS); header.primary |= IPC_LOAD_MODULE_CNT(module_cnt); - ret = sst_ipc_tx_message_wait(ipc, *ipc_header, data, - (sizeof(u16) * module_cnt), NULL, 0); + ret = sst_ipc_tx_message_nowait(ipc, *ipc_header, data, + (sizeof(u16) * module_cnt)); if (ret < 0) dev_err(ipc->dev, "ipc: load modules failed :%d\n", ret); diff --git a/sound/soc/intel/skylake/skl-sst-ipc.h b/sound/soc/intel/skylake/skl-sst-ipc.h index 7d21f055328d..fc07c397b060 100644 --- a/sound/soc/intel/skylake/skl-sst-ipc.h +++ b/sound/soc/intel/skylake/skl-sst-ipc.h @@ -77,6 +77,11 @@ struct skl_sst { wait_queue_head_t boot_wait; bool boot_complete; + /* module load */ + wait_queue_head_t mod_load_wait; + bool mod_load_complete; + bool mod_load_status; + /* IPC messaging */ struct sst_generic_ipc ipc; diff --git a/sound/soc/intel/skylake/skl-sst.c b/sound/soc/intel/skylake/skl-sst.c index b30bd384c8d3..39d4aaac73bf 100644 --- a/sound/soc/intel/skylake/skl-sst.c +++ b/sound/soc/intel/skylake/skl-sst.c @@ -52,7 +52,8 @@ static int skl_transfer_firmware(struct sst_dsp *ctx, { int ret = 0; - ret = ctx->cl_dev.ops.cl_copy_to_dmabuf(ctx, basefw, base_fw_size); + ret = ctx->cl_dev.ops.cl_copy_to_dmabuf(ctx, basefw, base_fw_size, + true); if (ret < 0) return ret; @@ -323,22 +324,49 @@ static struct skl_module_table *skl_module_get_from_id( return NULL; } -static int skl_transfer_module(struct sst_dsp *ctx, - struct skl_load_module_info *module) +static int skl_transfer_module(struct sst_dsp *ctx, const void *data, + u32 size, u16 mod_id) { - int ret; + int ret, bytes_left, curr_pos; struct skl_sst *skl = ctx->thread_context; + skl->mod_load_complete = false; + init_waitqueue_head(&skl->mod_load_wait); - ret = ctx->cl_dev.ops.cl_copy_to_dmabuf(ctx, module->fw->data, - module->fw->size); - if (ret < 0) - return ret; + bytes_left = ctx->cl_dev.ops.cl_copy_to_dmabuf(ctx, data, size, false); + if (bytes_left < 0) + return bytes_left; - ret = skl_ipc_load_modules(&skl->ipc, SKL_NUM_MODULES, - (void *)&module->mod_id); - if (ret < 0) + ret = skl_ipc_load_modules(&skl->ipc, SKL_NUM_MODULES, &mod_id); + if (ret < 0) { dev_err(ctx->dev, "Failed to Load module: %d\n", ret); + goto out; + } + + /* + * if bytes_left > 0 then wait for BDL complete interrupt and + * copy the next chunk till bytes_left is 0. if bytes_left is + * is zero, then wait for load module IPC reply + */ + while (bytes_left > 0) { + curr_pos = size - bytes_left; + + ret = skl_cldma_wait_interruptible(ctx); + if (ret < 0) + goto out; + + bytes_left = ctx->cl_dev.ops.cl_copy_to_dmabuf(ctx, + data + curr_pos, + bytes_left, false); + } + + ret = wait_event_timeout(skl->mod_load_wait, skl->mod_load_complete, + msecs_to_jiffies(SKL_IPC_BOOT_MSECS)); + if (ret == 0 || !skl->mod_load_status) { + dev_err(ctx->dev, "Module Load failed\n"); + ret = -EIO; + } +out: ctx->cl_dev.ops.cl_stop_dma(ctx); return ret; @@ -365,7 +393,8 @@ static int skl_load_module(struct sst_dsp *ctx, u16 mod_id, u8 *guid) } if (!module_entry->usage_cnt) { - ret = skl_transfer_module(ctx, module_entry->mod_info); + ret = skl_transfer_module(ctx, module_entry->mod_info->fw->data, + module_entry->mod_info->fw->size, mod_id); if (ret < 0) { dev_err(ctx->dev, "Failed to Load module\n"); return ret; -- cgit v1.2.3 From bf3e5ef5d549f650c13bef2b2192057cfef33d38 Mon Sep 17 00:00:00 2001 From: Dharageswari R Date: Mon, 13 Mar 2017 22:11:32 +0530 Subject: ASoC: Intel: Skylake: Fix parameter overwrite for KPB Module KPB module default parameter were overwritten by the dynamic instance id once use case is executed. This will cause module crash from subsequent execution of use case as the updated parameters are used. So instead of over writing the default parameter, make a copy and update the module parameter and use this in IPC message. Signed-off-by: Dharageswari R Signed-off-by: Kranthikumar, GudishaX Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-topology.c | 47 +++++++++++++++++++++------------- 1 file changed, 29 insertions(+), 18 deletions(-) (limited to 'sound') diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index d4058d2a8023..c6bd4bb49ec0 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -678,26 +678,29 @@ static int skl_tplg_mixer_dapm_pre_pmu_event(struct snd_soc_dapm_widget *w, return 0; } -static int skl_fill_sink_instance_id(struct skl_sst *ctx, - struct skl_algo_data *alg_data) +static int skl_fill_sink_instance_id(struct skl_sst *ctx, u32 *params, + int size, struct skl_module_cfg *mcfg) { - struct skl_kpb_params *params = (struct skl_kpb_params *)alg_data->params; - struct skl_mod_inst_map *inst; int i, pvt_id; - inst = params->map; + if (mcfg->m_type == SKL_MODULE_TYPE_KPB) { + struct skl_kpb_params *kpb_params = + (struct skl_kpb_params *)params; + struct skl_mod