Merge tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

Pull phy updates from Vinod Koul:
 "New hardware support:

   - ST STM32MP25 combophy support

   - Sparx5 support for lan969x serdes and updates to driver to support
     this

   - NXP PTN3222 eUSB2 to USB2 redriver

   - Qualcomm SAR2130P eusb2 support, QCS8300 USB DW3 and QMP USB2
     support, X1E80100 QMP PCIe PHY Gen4 support, QCS615 and QCS8300 QMP
     UFS PHY support and SA8775P eDP PHY support

   - Rockchip rk3576 usbdp and rk3576 usb2 phy support

   - Binding for Microchip ATA6561 can phy

  Updates:

   - Freescale driver updates from hdmi support

   - Conversion of rockchip rk3228 hdmi phy binding to yaml

   - Broadcom usb2-phy deprecated support dropped and USB init array
     update for BCM4908

   - TI USXGMII mode support in J7200

   - Switch back to platform_driver::remove() subsystem update"

* tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (59 commits)
  phy: qcom: qmp: Fix lecacy-legacy typo
  phy: lan969x-serdes: add support for lan969x serdes driver
  dt-bindings: phy: sparx5: document lan969x
  phy: sparx5-serdes: add support for branching on chip type
  phy: sparx5-serdes: add indirection layer to register macros
  phy: sparx5-serdes: add function for getting the CMU index
  phy: sparx5-serdes: add ops to match data
  phy: sparx5-serdes: add constant for the number of CMU's
  phy: sparx5-serdes: add constants to match data
  phy: sparx5-serdes: add support for private match data
  phy: bcm-ns-usb2: drop support for old binding variant
  dt-bindings: phy: bcm-ns-usb2-phy: drop deprecated variant
  dt-bindings: phy: Add QMP UFS PHY compatible for QCS8300
  dt-bindings: phy: qcom: snps-eusb2: Add SAR2130P compatible
  dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561
  phy: airoha: Fix REG_CSR_2L_RX{0,1}_REV0 definitions
  phy: airoha: Fix REG_CSR_2L_JCPLL_SDM_HREN config in airoha_pcie_phy_init_ssc_jcpll()
  phy: airoha: Fix REG_PCIE_PMA_TX_RESET config in airoha_pcie_phy_init_csr_2l()
  phy: airoha: Fix REG_CSR_2L_PLL_CMN_RESERVE0 config in airoha_pcie_phy_init_clk_out()
  phy: phy-rockchip-samsung-hdptx: Don't request RST_PHY/RST_ROPLL/RST_LCPLL
  ...

81 files changed, 3061 insertions, 1074 deletions

diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml
index 426101530a21..d72c02ab55ae 100644
--- a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml
@@ -18,16 +18,8 @@ properties:
     const: brcm,ns-usb2-phy
 
   reg:
-    anyOf:
-      - maxItems: 1
-        description: PHY control register
-      - maxItems: 1
-        description: iomem address range of DMU (Device Management Unit)
-        deprecated: true
-
-  reg-names:
-    items:
-      - const: dmu
+    maxItems: 1
+    description: PHY control register
 
   brcm,syscon-clkset:
     description: phandle to syscon for clkset register
@@ -50,12 +42,7 @@ required:
   - clocks
   - clock-names
   - "#phy-cells"
-
-oneOf:
-  - required:
-      - brcm,syscon-clkset
-  - required:
-      - reg-names
+  - brcm,syscon-clkset
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
index ce665a2779b7..d01b7d187040 100644
--- a/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
+++ b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
@@ -32,6 +32,7 @@ properties:
           - enum:
               - fsl,imx8dxl-usbphy
               - fsl,imx8qm-usbphy
+              - fsl,imx8qxp-usbphy
               - fsl,imx8ulp-usbphy
           - const: fsl,imx7ulp-usbphy
 
diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
index 423b7c4e62f2..6be3aa4557e5 100644
--- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
+++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
@@ -125,6 +125,16 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     default: 28
 
+  power-domains:
+    description:
+      The TPHY of MediaTek should exist within a power domain. The
+      developer should be aware that the hardware design of MediaTek TPHY
+      does not require the addition of MTCMOS. If the power to the TPHY
+      is turned off, it will impact other functions. From the current
+      perspective of USB hardware design, even if MTCMOS is added to the
+      TPHY, it should remain always on.
+    maxItems: 1
+
 # Required child node:
 patternProperties:
   "^(usb|pcie|sata)-phy@[0-9a-f]+$":
diff --git a/Documentation/devicetree/bindings/phy/microchip,sparx5-serdes.yaml b/Documentation/devicetree/bindings/phy/microchip,sparx5-serdes.yaml
index bdbdb3bbddbe..fa0b02916dac 100644
--- a/Documentation/devicetree/bindings/phy/microchip,sparx5-serdes.yaml
+++ b/Documentation/devicetree/bindings/phy/microchip,sparx5-serdes.yaml
@@ -8,6 +8,7 @@ title: Microchip Sparx5 Serdes controller
 
 maintainers:
   - Steen Hegelund <steen.hegelund@microchip.com>
+  - Daniel Machon <daniel.machon@microchip.com>
 
 description: |
   The Sparx5 SERDES interfaces share the same basic functionality, but
@@ -62,12 +63,26 @@ description: |
   * 10.3125 Gbps (10GBASE-R/10GBASE-KR/USXGMII)
   * 25.78125 Gbps (25GBASE-KR/25GBASE-CR/25GBASE-SR/25GBASE-LR/25GBASE-ER)
 
+  lan969x has ten SERDES10G interfaces that share the same features, operating
+  modes and data rates as the equivalent Sparx5 SERDES10G interfaces.
+
 properties:
   $nodename:
     pattern: "^serdes@[0-9a-f]+$"
 
   compatible:
-    const: microchip,sparx5-serdes
+    oneOf:
+      - enum:
+          - microchip,sparx5-serdes
+          - microchip,lan9691-serdes
+      - items:
+          - enum:
+              - microchip,lan9698-serdes
+              - microchip,lan9696-serdes
+              - microchip,lan9694-serdes
+              - microchip,lan9693-serdes
+              - microchip,lan9692-serdes
+          - const: microchip,lan9691-serdes
 
   reg:
     minItems: 1
diff --git a/Documentation/devicetree/bindings/phy/nxp,ptn3222.yaml b/Documentation/devicetree/bindings/phy/nxp,ptn3222.yaml
new file mode 100644
index 000000000000..acec5bb2391d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/nxp,ptn3222.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/nxp,ptn3222.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PTN3222 1-port eUSB2 to USB2 redriver
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - nxp,ptn3222
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  vdd1v8-supply:
+    description: power supply (1.8V)
+
+  vdd3v3-supply:
+    description: power supply (3.3V)
+
+  reset-gpios: true
+
+required:
+  - compatible
+  - reg
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        redriver@4f {
+            compatible = "nxp,ptn3222";
+            reg = <0x4f>;
+            #phy-cells = <0>;
+            vdd3v3-supply = <&vreg_3p3>;
+            vdd1v8-supply = <&vreg_1p8>;
+            reset-gpios = <&gpio_reset GPIO_ACTIVE_LOW>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml
index 37f028f7a095..137ac5703853 100644
--- a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml
@@ -96,7 +96,7 @@ patternProperties:
           Specifies the type of PHY for which the group of PHY lanes is used.
           Refer include/dt-bindings/phy/phy.h. Constants from the header should be used.
         $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [2, 4]
+        enum: [2, 4, 8, 9]
 
       cdns,num-lanes:
         description:
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt
deleted file mode 100644
index 710cccd5ee56..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-ROCKCHIP HDMI PHY WITH INNO IP BLOCK
-
-Required properties:
- - compatible : should be one of the listed compatibles:
-	* "rockchip,rk3228-hdmi-phy",
-	* "rockchip,rk3328-hdmi-phy";
- - reg : Address and length of the hdmi phy control register set
- - clocks : phandle + clock specifier for the phy clocks
- - clock-names : string, clock name, must contain "sysclk" for system
-	  control and register configuration, "refoclk" for crystal-
-	  oscillator reference PLL clock input and "refpclk" for pclk-
-	  based refeference PLL clock input.
- - #clock-cells: should be 0.
- - clock-output-names : shall be the name for the output clock.
- - interrupts : phandle + interrupt specified for the hdmiphy interrupt
- - #phy-cells : must be 0. See ./phy-bindings.txt for details.
-
-Optional properties for rk3328-hdmi-phy:
- - nvmem-cells = phandle + nvmem specifier for the cpu-version efuse
- - nvmem-cell-names : "cpu-version" to read the chip version, required
-	  for adjustment to some frequency settings
-
-Example:
-	hdmi_phy: hdmi-phy@12030000 {
-		compatible = "rockchip,rk3228-hdmi-phy";
-		reg = <0x12030000 0x10000>;
-		#phy-cells = <0>;
-		clocks = <&cru PCLK_HDMI_PHY>, <&xin24m>, <&cru DCLK_HDMIPHY>;
-		clock-names = "sysclk", "refoclk", "refpclk";
-		#clock-cells = <0>;
-		clock-output-names = "hdmi_phy";
-		status = "disabled";
-	};
-
-Then the PHY can be used in other nodes such as:
-
-	hdmi: hdmi@200a0000 {
-		compatible = "rockchip,rk3228-dw-hdmi";
-		...
-		phys = <&hdmi_phy>;
-		phy-names = "hdmi";
-		...
-	};
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
index 1f1f8863b80d..b42f1272903d 100644
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
@@ -13,6 +13,7 @@ maintainers:
 properties:
   compatible:
     enum:
+      - rockchip,rk3576-usbdp-phy
       - rockchip,rk3588-usbdp-phy
 
   reg:
diff --git a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
index 4e15d90d08b0..293fb6a9b1c3 100644
--- a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
@@ -17,6 +17,7 @@ description:
 properties:
   compatible:
     enum:
+      - qcom,sa8775p-edp-phy
       - qcom,sc7280-edp-phy
       - qcom,sc8180x-edp-phy
       - qcom,sc8280xp-dp-phy
diff --git a/Documentation/devicetree/bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml
index b9107759b2a5..90fc8c039219 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml
@@ -15,7 +15,12 @@ description:
 
 properties:
   compatible:
-    const: qcom,sa8775p-dwmac-sgmii-phy
+    oneOf:
+      - items:
+          - enum:
+              - qcom,qcs8300-dwmac-sgmii-phy
+          - const: qcom,sa8775p-dwmac-sgmii-phy
+      - const: qcom,sa8775p-dwmac-sgmii-phy
 
   reg:
     items:
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
index 380a9222a51d..13fdf5f1beba 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
@@ -41,6 +41,7 @@ properties:
       - qcom,x1e80100-qmp-gen3x2-pcie-phy
       - qcom,x1e80100-qmp-gen4x2-pcie-phy
       - qcom,x1e80100-qmp-gen4x4-pcie-phy
+      - qcom,x1e80100-qmp-gen4x8-pcie-phy
 
   reg:
     minItems: 1
@@ -172,6 +173,7 @@ allOf:
               - qcom,x1e80100-qmp-gen3x2-pcie-phy
               - qcom,x1e80100-qmp-gen4x2-pcie-phy
               - qcom,x1e80100-qmp-gen4x4-pcie-phy
+              - qcom,x1e80100-qmp-gen4x8-pcie-phy
     then:
       properties:
         clocks:
@@ -202,6 +204,7 @@ allOf:
               - qcom,sm8650-qmp-gen4x2-pcie-phy
               - qcom,x1e80100-qmp-gen4x2-pcie-phy
               - qcom,x1e80100-qmp-gen4x4-pcie-phy
+              - qcom,x1e80100-qmp-gen4x8-pcie-phy
     then:
       properties:
         resets:
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.