Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "ARM:
   - Page ownership tracking between host EL1 and EL2
   - Rely on userspace page tables to create large stage-2 mappings
   - Fix incompatibility between pKVM and kmemleak
   - Fix the PMU reset state, and improve the performance of the virtual
     PMU
   - Move over to the generic KVM entry code
   - Address PSCI reset issues w.r.t. save/restore
   - Preliminary rework for the upcoming pKVM fixed feature
   - A bunch of MM cleanups
   - a vGIC fix for timer spurious interrupts
   - Various cleanups

  s390:
   - enable interpretation of specification exceptions
   - fix a vcpu_idx vs vcpu_id mixup

  x86:
   - fast (lockless) page fault support for the new MMU
   - new MMU now the default
   - increased maximum allowed VCPU count
   - allow inhibit IRQs on KVM_RUN while debugging guests
   - let Hyper-V-enabled guests run with virtualized LAPIC as long as
     they do not enable the Hyper-V "AutoEOI" feature
   - fixes and optimizations for the toggling of AMD AVIC (virtualized
     LAPIC)
   - tuning for the case when two-dimensional paging (EPT/NPT) is
     disabled
   - bugfixes and cleanups, especially with respect to vCPU reset and
     choosing a paging mode based on CR0/CR4/EFER
   - support for 5-level page table on AMD processors

  Generic:
   - MMU notifier invalidation callbacks do not take mmu_lock unless
     necessary
   - improved caching of LRU kvm_memory_slot
   - support for histogram statistics
   - add statistics for halt polling and remote TLB flush requests"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (210 commits)
  KVM: Drop unused kvm_dirty_gfn_invalid()
  KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is adjusted
  KVM: MMU: mark role_regs and role accessors as maybe unused
  KVM: MIPS: Remove a "set but not used" variable
  x86/kvm: Don't enable IRQ when IRQ enabled in kvm_wait
  KVM: stats: Add VM stat for remote tlb flush requests
  KVM: Remove unnecessary export of kvm_{inc,dec}_notifier_count()
  KVM: x86/mmu: Move lpage_disallowed_link further "down" in kvm_mmu_page
  KVM: x86/mmu: Relocate kvm_mmu_page.tdp_mmu_page for better cache locality
  Revert "KVM: x86: mmu: Add guest physical address check in translate_gpa()"
  KVM: x86/mmu: Remove unused field mmio_cached in struct kvm_mmu_page
  kvm: x86: Increase KVM_SOFT_MAX_VCPUS to 710
  kvm: x86: Increase MAX_VCPUS to 1024
  kvm: x86: Set KVM_MAX_VCPU_ID to 4*KVM_MAX_VCPUS
  KVM: VMX: avoid running vmx_handle_exit_irqoff in case of emulation
  KVM: x86/mmu: Don't freak out if pml5_root is NULL on 4-level host
  KVM: s390: index kvm->arch.idle_mask by vcpu_idx
  KVM: s390: Enable specification exception interpretation
  KVM: arm64: Trim guest debug exception handling
  KVM: SVM: Add 5-level page table support for SVM
  ...

120 files changed, 2891 insertions, 1605 deletions

diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
index c6212c2d5fe3..a6729c8cf063 100644
--- a/Documentation/virt/kvm/api.rst
+++ b/Documentation/virt/kvm/api.rst
@@ -3357,6 +3357,7 @@ flags which can include the following:
   - KVM_GUESTDBG_INJECT_DB:     inject DB type exception [x86]
   - KVM_GUESTDBG_INJECT_BP:     inject BP type exception [x86]
   - KVM_GUESTDBG_EXIT_PENDING:  trigger an immediate guest exit [s390]
+  - KVM_GUESTDBG_BLOCKIRQ:      avoid injecting interrupts/NMI/SMI [x86]
 
 For example KVM_GUESTDBG_USE_SW_BP indicates that software breakpoints
 are enabled in memory so we need to ensure breakpoint exceptions are
@@ -5208,6 +5209,9 @@ by a string of size ``name_size``.
 	#define KVM_STATS_TYPE_CUMULATIVE	(0x0 << KVM_STATS_TYPE_SHIFT)
 	#define KVM_STATS_TYPE_INSTANT		(0x1 << KVM_STATS_TYPE_SHIFT)
 	#define KVM_STATS_TYPE_PEAK		(0x2 << KVM_STATS_TYPE_SHIFT)
+	#define KVM_STATS_TYPE_LINEAR_HIST	(0x3 << KVM_STATS_TYPE_SHIFT)
+	#define KVM_STATS_TYPE_LOG_HIST		(0x4 << KVM_STATS_TYPE_SHIFT)
+	#define KVM_STATS_TYPE_MAX		KVM_STATS_TYPE_LOG_HIST
 
 	#define KVM_STATS_UNIT_SHIFT		4
 	#define KVM_STATS_UNIT_MASK		(0xF << KVM_STATS_UNIT_SHIFT)
@@ -5215,18 +5219,20 @@ by a string of size ``name_size``.
 	#define KVM_STATS_UNIT_BYTES		(0x1 << KVM_STATS_UNIT_SHIFT)
 	#define KVM_STATS_UNIT_SECONDS		(0x2 << KVM_STATS_UNIT_SHIFT)
 	#define KVM_STATS_UNIT_CYCLES		(0x3 << KVM_STATS_UNIT_SHIFT)
+	#define KVM_STATS_UNIT_MAX		KVM_STATS_UNIT_CYCLES
 
 	#define KVM_STATS_BASE_SHIFT		8
 	#define KVM_STATS_BASE_MASK		(0xF << KVM_STATS_BASE_SHIFT)
 	#define KVM_STATS_BASE_POW10		(0x0 << KVM_STATS_BASE_SHIFT)
 	#define KVM_STATS_BASE_POW2		(0x1 << KVM_STATS_BASE_SHIFT)
+	#define KVM_STATS_BASE_MAX		KVM_STATS_BASE_POW2
 
 	struct kvm_stats_desc {
 		__u32 flags;
 		__s16 exponent;
 		__u16 size;
 		__u32 offset;
-		__u32 unused;
+		__u32 bucket_size;
 		char name[];
 	};
 
@@ -5237,21 +5243,35 @@ The following flags are supported:
 Bits 0-3 of ``flags`` encode the type:
 
   * ``KVM_STATS_TYPE_CUMULATIVE``
-    The statistics data is cumulative. The value of data can only be increased.
+    The statistics reports a cumulative count. The value of data can only be increased.
     Most of the counters used in KVM are of this type.
     The corresponding ``size`` field for this type is always 1.
     All cumulative statistics data are read/write.
   * ``KVM_STATS_TYPE_INSTANT``
-    The statistics data is instantaneous. Its value can be increased or
+    The statistics reports an instantaneous value. Its value can be increased or
     decreased. This type is usually used as a measurement of some resources,
     like the number of dirty pages, the number of large pages, etc.
     All instant statistics are read only.
     The corresponding ``size`` field for this type is always 1.
   * ``KVM_STATS_TYPE_PEAK``
-    The statistics data is peak. The value of data can only be increased, and
-    represents a peak value for a measurement, for example the maximum number
+    The statistics data reports a peak value, for example the maximum number
     of items