Merge tag 'gpio-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.8 kernel cycle.  The big
  news is the completion of the chardev ABI which I'm very happy about
  and apart from that it's an ordinary, quite busy cycle.  The details
  are below.

  The patches are tested in linux-next for some time, patches to other
  subsystem mostly have ACKs.

  I got overly ambitious with configureing lines as input for IRQ lines
  but it turns out that some controllers have their interrupt-enable and
  input-enabling in orthogonal settings so the assumption that all IRQ
  lines are input lines does not hold.  Oh well, revert and back to the
  drawing board with that.

  Core changes:

   - The big item is of course the completion of the character device
     ABI.  It has now replaced and surpassed the former unmaintainable
     sysfs ABI: we can now hammer (bitbang) individual lines or sets of
     lines and read individual lines or sets of lines from userspace,
     and we can also register to listen to GPIO events from userspace.

     As a tie-in we have two new tools in tools/gpio: gpio-hammer and
     gpio-event-mon that illustrate the proper use of the new ABI.  As
     someone said: the wild west days of GPIO are now over.

   - Continued to remove the pointless ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
     Kconfig symbols.  I'm patching hexagon, openrisc, powerpc, sh,
     unicore, ia64 and microblaze.  These are either ACKed by their
     maintainers or patched anyways after a grace period and no response
     from maintainers.

     Some archs (ARM) come in from their trees, and others (x86) are
     still not fixed, so I might send a second pull request to root it
     out later in this merge window, or just defer to v4.9.

   - The GPIO tools are moved to the tools build system.

  New drivers:

   - New driver for the MAX77620/MAX20024.

   - New driver for the Intel Merrifield.

   - Enabled PCA953x for the TI PCA9536.

   - Enabled PCA953x for the Intel Edison.

   - Enabled R8A7792 in the RCAR driver.

  Driver improvements:

   - The STMPE and F7188x now supports the .get_direction() callback.

   - The Xilinx driver supports setting multiple lines at once.

   - ACPI support for the Vulcan GPIO controller.

   - The MMIO GPIO driver supports device tree probing.

   - The Acer One 10 is supported through the _DEP ACPI attribute.

  Cleanups:

   - A major cleanup of the OF/DT support code.  It is way easier to
     read and understand now, probably this improves performance too.

   - Drop a few redundant .owner assignments.

   - Remove CLPS711x boardfile support: we are 100% DT"

* tag 'gpio-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (67 commits)
  MAINTAINERS: Add INTEL MERRIFIELD GPIO entry
  gpio: dwapb: add missing fwnode_handle_put() in dwapb_gpio_get_pdata()
  gpio: merrifield: Protect irq_ack() and gpio_set() by lock
  gpio: merrifield: Introduce GPIO driver to support Merrifield
  gpio: intel-mid: Make it depend to X86_INTEL_MID
  gpio: intel-mid: Sort header block alphabetically
  gpio: intel-mid: Remove potentially harmful code
  gpio: rcar: add R8A7792 support
  gpiolib: remove duplicated include from gpiolib.c
  Revert "gpio: convince line to become input in irq helper"
  gpiolib: of_find_gpio(): Don't discard errors
  gpio: of: Allow overriding the device node
  gpio: free handles in fringe cases
  gpio: tps65218: Add platform_device_id table
  gpio: max77620: get gpio value based on direction
  gpio: lynxpoint: avoid potential warning on error path
  tools/gpio: add install section
  tools/gpio: move to tools buildsystem
  gpio: intel-mid: switch to devm_gpiochip_add_data()
  gpio: 74x164: Use spi_write() helper instead of open coding
  ...

66 files changed, 2207 insertions, 230 deletions

diff --git a/Documentation/devicetree/bindings/gpio/cirrus,clps711x-mctrl-gpio.txt b/Documentation/devicetree/bindings/gpio/cirrus,clps711x-mctrl-gpio.txt
index 94ae9f82dcf8..fd42e7280f72 100644
--- a/Documentation/devicetree/bindings/gpio/cirrus,clps711x-mctrl-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/cirrus,clps711x-mctrl-gpio.txt
@@ -1,7 +1,7 @@
 * ARM Cirrus Logic CLPS711X SYSFLG1 MCTRL GPIOs
 
 Required properties:
-- compatible: Should contain "cirrus,clps711x-mctrl-gpio".
+- compatible: Should contain "cirrus,ep7209-mctrl-gpio".
 - gpio-controller: Marks the device node as a gpio controller.
 - #gpio-cells: Should be two. The first cell is the pin number and
   the second cell is used to specify the gpio polarity:
@@ -11,7 +11,7 @@ Required properties:
 Example:
 	sysgpio: sysgpio {
 		compatible = "cirrus,ep7312-mctrl-gpio",
-			     "cirrus,clps711x-mctrl-gpio";
+			     "cirrus,ep7209-mctrl-gpio";
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt b/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt
index e0d0446a6b78..0a304ad29d81 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt
@@ -1,7 +1,7 @@
 Cirrus Logic CLPS711X GPIO controller
 
 Required properties:
-- compatible: Should be "cirrus,clps711x-gpio"
+- compatible: Should be "cirrus,ep7209-gpio"
 - reg: Physical base GPIO controller registers location and length.
   There should be two registers, first is DATA register, the second
   is DIRECTION.
@@ -21,7 +21,7 @@ aliases {
 };
 
 porta: gpio@80000000 {
-	compatible = "cirrus,clps711x-gpio";
+	compatible = "cirrus,ep7312-gpio","cirrus,ep7209-gpio";
 	reg = <0x80000000 0x1>, <0x80000040 0x1>;
 	gpio-controller;
 	#gpio-cells = <2>;
diff --git a/Documentation/devicetree/bindings/gpio/gpio-max77620.txt b/Documentation/devicetree/bindings/gpio/gpio-max77620.txt
new file mode 100644
index 000000000000..410e716fd3d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-max77620.txt
@@ -0,0 +1,25 @@
+GPIO driver for MAX77620 Power management IC from Maxim Semiconductor.
+
+Device has 8 GPIO pins which can be configured as GPIO as well as the
+special IO functions.
+
+Required properties:
+-------------------
+- gpio-controller : 	Marks the device node as a gpio controller.
+- #gpio-cells : 	Should be two.  The first cell is the pin number and
+			the second cell is used to specify the gpio polarity:
+				0 = active high
+				1 = active low
+For more details, please refer generic GPIO DT binding document
+<devicetree/bindings/gpio/gpio.txt>.
+
+Example:
+--------
+#include <dt-bindings/mfd/max77620.h>
+...
+max77620@3c {
+	compatible = "maxim,max77620";
+
+	gpio-controller;
+	#gpio-cells = <2>;
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
index 6b4a98f74be3..08dd15f89ba9 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
@@ -21,6 +21,7 @@ Required properties:
 	maxim,max7313
 	maxim,max7315
 	ti,pca6107
+	ti,pca9536
 	ti,tca6408
 	ti,tca6416
 	ti,tca6424
diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
index f60e2f477e93..8da26b35b5c3 100644
--- a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
+++ b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
@@ -7,6 +7,7 @@ Required Properties:
     - "renesas,gpio-r8a7779": for R8A7779 (R-Car H1) compatible GPIO controller.
     - "renesas,gpio-r8a7790": for R8A7790 (R-Car H2) compatible GPIO controller.
     - "renesas,gpio-r8a7791": for R8A7791 (R-Car M2-W) compatible GPIO controller.
+    - "renesas,gpio-r8a7792": for R8A7792 (R-Car V2H) compatible GPIO controller.
     - "renesas,gpio-r8a7793": for R8A7793 (R-Car M2-N) compatible GPIO controller.
     - "renesas,gpio-r8a7794": for R8A7794 (R-Car E2) compatible GPIO controller.
     - "renesas,gpio-r8a7795": for R8A7795 (R-Car H3) compatible GPIO controller.
diff --git a/Documentation/gpio/drivers-on-gpio.txt b/Documentation/gpio/drivers-on-gpio.txt
index 14bf95a13bae..306513251713 100644
--- a/Documentation/gpio/drivers-on-gpio.txt
+++ b/Documentation/gpio/drivers-on-gpio.txt
@@ -37,15 +37,16 @@ hardware descriptions such as device tree or ACPI:
   external connector status, such as a headset line for an audio driver or an
   HDMI connector. It will provide a better userspace sysfs interface than GPIO.
 
-- restart-gpio: drivers/power/gpio-restart.c is used to restart/reboot the
-  system by pulling a GPIO line and will register a restart handler so
+- restart-gpio: drivers/power/reset/gpio-restart.c is used to restart/reboot
+  the system by pulling a GPIO line and will register a restart handler so
   userspace can issue the right system call to restart the system.
 
-- poweroff-gpio: drivers/power/gpio-poweroff.c is used to power the system down
-  by pulling a GPIO line and will register a pm_power_off() callback so that
-  userspace can issue the right system call to power down the system.
+- poweroff-gpio: drivers/power/reset/gpio-poweroff.c is used to power the
+  system down by pulling a GPIO line and will register a pm_power_off()
+  callback so that userspace can issue the right system call to power down the
+  system.
 
-- gpio-gate-clock: drivers/clk/clk-gpio-gate.c is used to control a gated clock
+- gpio-gate-clock: drivers/clk/clk-gpio.c is used to control a gated clock
   (off/on) that uses a GPIO, and integrated with the clock subsystem.
 
 - i2c-gpio: drivers/i2c/busses/i2c-gpio.c is used to drive an I2C bus
diff --git a/MAINTAINERS b/MAINTAINERS
index 0a3827b722b0..f4698b1cf847 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6060,6 +6060,12 @@ L:     linux-rdma@vger.kernel.org
 S:     Supported
 F:     drivers/infiniband/hw/i40iw/
 
+INTEL MERRIFIELD GPIO DRIVER
+M:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+L:	linux-gpio@vger.kernel.org
+S:	Maintained
+F:	drivers/gpio/gpio-merrifield.c
+
 INTEL-MID GPIO DRIVER
 M:	David Cohen <david.a.cohen@linux.intel.com>
 L:	linux-gpio@vger.kernel.org
diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig
index 57298e7b4867..1941e4baaee6 100644
--- a/arch/hexagon/Kconfig
+++ b/arch/hexagon/Kconfig
@@ -8,8 +8,7 @@ config HEXAGON
 	# select HAVE_REGS_AND_STACK_ACCESS_API
 	# select HAVE_HW_BREAKPOINT if PERF_EVENTS
 	# select ARCH_HAS_CPU_IDLE_WAIT
-	# select ARCH_WANT_OPTIONAL_GPIOLIB
-	# select ARCH_REQUIRE_GPIOLIB
+	# select GPIOLIB
 	# select HAVE_CLK
 	# select GENERIC_PENDING_IRQ if SMP
 	select GENERIC_ATOMIC64
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index e109ee95e919..6a15083cc366 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -39,7 +39,6 @@ config IA64
 	select GENERIC_PENDING_IRQ if SMP
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_LEGACY
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select GENERIC_IOMAP
 	select GENERIC_SMP_IDLE_THREAD
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 636e0720fb20..86f65721e629 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -3,7 +3,6 @@ config MICROBLAZE
 	select ARCH_HAS_GCOV_PROFILE_ALL
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_WANT_IPC_PARSE_VERSION
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select BUILDTIME_EXTABLE_SORT
 	select CLKSRC_OF
 	select CLONE_BACKWARDS3
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index 142cb057c41b..489e7f909286 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -10,7 +10,7 @@ config OPENRISC
 	select IRQ_DOMAIN
 	select HANDLE_DOMAIN_IRQ
 	select HAVE_MEMBLOCK
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
         select HAVE_ARCH_TRACEHOOK
 	select GENERIC_IRQ_CHIP
 	select GENERIC_IRQ_PROBE
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 0a9d439bcda6..d111044f41a2 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -98,7 +98,6 @@ config PPC
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select SYSCTL_EXCEPTION_TRACE
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select VIRT_TO_BUS if !PPC64
 	select HAVE_IDE
 	select HAVE_IOREMAP_PROT
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index 6e287f1294fa..e3257f24a8a1 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -137,7 +137,7 @@ config STB03xxx
 config PPC4xx_GPIO
 	bool "PPC4xx GPIO support"
 	depends on 40x
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	help
 	  Enable gpiolib support for ppc40x based boards
 
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 5538e57c36c1..48fc18041ff6 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -273,7 +273,7 @@ config PPC44x_SIMPLE
 config PPC4xx_GPIO
 	bool "PPC4xx GPIO support"
 	depends on 44x
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	help
 	  Enable gpiolib support for ppc440 based boards
 
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index f09016f6b3a6..bf7ae5cbd07a 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -6,7 +6,6 @@ config PPC_MPC512x
 	select IPIC
 	select PPC_PCI_CHOICE
 	select FSL_PCI if PCI
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
 	select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
 
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 2bdc8c862c46..4ef7f1cd05b7 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -116,7 +116,6 @@ endif
 # used for usb & gpio
 config PPC_MPC831x
 	bool
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 # used for math-emu
 config PPC_MPC832x
@@ -125,9 +124,7 @@ config PPC_MPC832x
 # used for usb & gpio
 config PPC_MPC834x
 	bool
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 # used for usb & gpio
 config PPC_MPC837x
 	bool
-	select ARCH_WANT_OPTIONAL_GPIOLIB
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index e626461a63bd..df25a3ed489d 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -225,7 +225,7 @@ config GE_IMP3A
 	select DEFAULT_UIMAGE
 	select SWIOTLB
 	select MMIO_NVRAM
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select GE_FPGA
 	help
 	  This option enables support for the GE Intelligent Platforms IMP3A
@@ -272,7 +272,7 @@ config CORENET_GENERIC
 	select PPC_E500MC
 	select PHYS_64BIT
 	select SWIOTLB
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select GPIO_MPC8XXX
 	select HAS_RAPIDIO
 	select PPC_EPAPR_HV_PIC
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 1afd1e4a2dd2..3988f16e46c1 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -4,7 +4,6 @@ menuconfig PPC_86xx
 	depends on 6xx
 	select FSL_SOC
 	select ALTIVEC
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
 	  The Freescale E600 SoCs have 74xx cores.
 
@@ -37,7 +36,7 @@ config GEF_PPC9A
 	bool "GE PPC9A"
 	select DEFAULT_UIMAGE
 	select MMIO_NVRAM
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select GE_FPGA
 	help
 	  This option enables support for the GE PPC9A.
@@ -46,7 +45,7 @@ config GEF_SBC310
 	bool "GE SBC310"
 	select DEFAULT_UIMAGE
 	select MMIO_NVRAM
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select GE_FPGA
 	help
 	  This option enables support for the GE SBC310.
@@ -55,7 +54,7 @@ config GEF_SBC610
 	bool "GE SBC610"
 	select DEFAULT_UIMAGE
 	select MMIO_NVRAM
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select GE_FPGA
 	select HAS_RAPIDIO
 	help
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index 157250426b56..564d99bb2a26 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -109,7 +109,7 @@ config 8xx_COPYBACK
 
 config 8xx_GPIO
 	bool "GPIO API Support"
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	help
 	  Saying Y here will cause the ports on an MPC8xx processor to be used
 	  with the GPIO API.  If you say N here, the kernel needs less memory.
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 46a3533d3acb..3663f71fd913 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -275,7 +275,7 @@ config TAU_AVERAGE
 config QE_GPIO
 	bool "QE GPIO support"
 	depends on QUICC_ENGINE
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	help
 	  Say Y here if you're going to use hardware that connects to the
 	  QE GPIOs.
@@ -285,7 +285,7 @@ config CPM2
 	depends on (FSL_SOC_BOOKE && PPC32) || 8260
 	select CPM
 	select PPC_PCI_CHOICE
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	help
 	  The CPM2 (Communications Processor Module) is a coprocessor on
 	  embedded CPUs made by Freescale.  Selecting this option means that
@@ -324,7 +324,7 @@ config OF_RTC
 config SIMPLE_GPIO
 	bool "Support for simple, memory-mapped GPIO controllers"
 	depends on PPC
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	help
 	  Say Y here to support simple, memory-mapped GPIO controllers.
 	  These are usually BCSRs used to control board's switches, LEDs,
@@ -334,7 +334,7 @@ config SIMPLE_GPIO
 config MCU_MPC8349EMITX
 	bool "MPC8349E-mITX MCU driver"
 	depends on I2C=y && PPC_83xx
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	help
 	  Say Y here to enable soft power-off functionality on the Freescale
 	  boards with the MPC8349E-mITX-compatible MCU chips. This driver will
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index e803a836cb7c..0d5f3a9bb315 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -264,7 +264,6 @@ config CPU_SUBTYPE_SH7203
 	select CPU_HAS_FPU
 	select SYS_SUPPORTS_SH_CMT
 	select SYS_SUPPORTS_SH_MTU2
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select PINCTRL
 
 config CPU_SUBTYPE_SH7206
@@ -353,7 +352,6 @@ config CPU_SUBTYPE_SH7720
 	select CPU_SH3
 	select CPU_HAS_DSP
 	select SYS_SUPPORTS_SH_CMT
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select USB_OHCI_SH if USB_OHCI_HCD
 	select PINCTRL
 	help
@@ -419,7 +417,6 @@ config CPU_SUB