Merge tag 'v6.8-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt

One new boards, the CoolPi CM5 SoM and 4B SBC. Basic node for the rk3588
display controller and a bunch of small improvements for different boards,

* tag 'v6.8-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (21 commits)
  arm64: dts: rockchip: Fix led pinctrl of lubancat 1
  arm64: dts: rockchip: correct gpio_pwrctrl1 typo on nanopc-t6
  arm64: dts: rockchip: correct gpio_pwrctrl1 typo on rock-5b
  arm64: dts: rockchip: support poweroff on the rock-5b
  arm64: dts: rockchip: Support poweroff on Orange Pi 5
  arm64: dts: rockchip: nanopc-t6 sdmmc beautification
  arm64: dts: rockchip: Fix rk3588 USB power-domain clocks
  arm64: dts: rockchip: configure eth pad driver strength for orangepi r1 plus lts
  arm64: dts: rockchip: Support poweroff on NanoPC-T6
  arm64: dts: rockchip: rk3308-rock-pi-s gpio-line-names cleanup
  arm64: dts: rockchip: Add support for rk3588 based board Cool Pi CM5 EVB
  dt-bindings: arm: rockchip: Add Cool Pi CM5
  arm64: dts: rockchip: Add support for rk3588s based board Cool Pi 4B
  dt-bindings: arm: rockchip: Add Cool Pi 4B
  dt-bindings: vendor-prefixes: Add Cool Pi
  arm64: dts: rockchip: add gpio-line-names to rk3328-rock-pi-e
  arm64: dts: rockchip: make use gpio-keys for buttons on puma-haikou
  arm64: dts: rockchip: expose BIOS Disable feedback pin on rk3399-puma
  arm64: dts: rockchip: fix misleading comment in rk3399-puma-haikou.dts
  arm64: dts: rockchip: Add vop on rk3588
  ...

Link: https://lore.kernel.org/r/3711719.VqM8IeB0Os@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

17 files changed, 1956 insertions, 71 deletions

diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 2158d0a9f573..5cf5cbef2cf5 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -97,6 +97,18 @@ properties:
           - const: chipspark,rayeager-px2
           - const: rockchip,rk3066a
 
+      - description: Cool Pi Compute Module 5(CM5) EVB
+        items:
+          - enum:
+              - coolpi,pi-cm5-evb
+          - const: coolpi,pi-cm5
+          - const: rockchip,rk3588
+
+      - description: Cool Pi 4 Model B
+        items:
+          - const: coolpi,pi-4b
+          - const: rockchip,rk3588s
+
       - description: Edgeble Neural Compute Module 2(Neu2) SoM based boards
         items:
           - const: edgeble,neural-compute-module-2-io   # Edgeble Neural Compute Module 2 IO Board
diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
index e4fa6a07b4fa..26db4f48ff62 100644
--- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
+++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -28,6 +28,8 @@ properties:
               - rockchip,rk3588-sys-grf
               - rockchip,rk3588-pcie3-phy-grf
               - rockchip,rk3588-pcie3-pipe-grf
+              - rockchip,rk3588-vo-grf
+              - rockchip,rk3588-vop-grf
               - rockchip,rv1108-usbgrf
           - const: syscon
       - items:
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 6aff14e4d9a5..8f03e85be90a 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -294,6 +294,8 @@ patternProperties:
     description: CompuLab Ltd.
   "^congatec,.*":
     description: congatec GmbH
+  "^coolpi,.*":
+    description: cool-pi.com
   "^coreriver,.*":
     description: CORERIVER Semiconductor Co.,Ltd.
   "^corpro,.*":
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 600c420bc550..a7b30e11beaf 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -101,6 +101,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
@@ -110,6 +111,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-turing-rk1.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-coolpi-4b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
index f2d7251de298..b47fe02c33fb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
@@ -143,6 +143,68 @@
 	status = "okay";
 };
 
+&gpio0 {
+	gpio-line-names =
+		/* GPIO0_A0 - A7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO0_B0 - B7 */
+		"", "", "", "header1-pin3 [GPIO0_B3]",
+		"header1-pin5 [GPIO0_B4]", "", "",
+		"header1-pin11 [GPIO0_B7]",
+		/* GPIO0_C0 - C7 */
+		"header1-pin13 [GPIO0_C0]",
+		"header1-pin15 [GPIO0_C1]", "", "", "",
+		"", "", "",
+		/* GPIO0_D0 - D7 */
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio1 {
+	gpio-line-names =
+		/* GPIO1_A0 - A7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO1_B0 - B7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO1_C0 - C7 */
+		"", "", "", "", "", "", "header1-pin21 [GPIO1_C6]",
+		"header1-pin19 [GPIO1_C7]",
+		/* GPIO1_D0 - D7 */
+		"header1-pin23 [GPIO1_D0]", "header1-pin24 [GPIO1_D1]",
+		"", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		/* GPIO2_A0 - A7 */
+		"header1-pin10 [GPIO2_A0]", "header1-pin8 [GPIO2_A1]",
+		"", "",
+		"header1-pin7 [GPIO2_A4]", "header1-pin12 [GPIO2_A5]",
+		"header2-pin46 [GPIO2_A6]", "header1-pin22 [GPIO1_A7]",
+		/* GPIO2_B0 - B7 */
+		"header2-pin45 [GPIO2_B0]", "header1-pin18 [GPIO2_B1]",
+		"header1-pin16 [GPIO2_B2]", "header2-pin44 [GPIO2_B3]",
+		"header2-pin43 [GPIO2_B4]", "header2-pin28 [GPIO2_B5]",
+		"header2-pin30 [GPIO2_B6]", "header2-pin32 [GPIO2_B7]",
+		/* GPIO2_C0 - C7 */
+		"header2-pin34 [GPIO2_C0]", "", "", "", "", "", "", "",
+		/* GPIO2_D0 - D7 */
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		/* GPIO3_A0 - A7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO3_B0 - B7 */
+		"", "", "header2-pin42 [GPIO3_B2]",
+		"header2-pin41 [GPIO3_B3]", "header2-pin40 [GPIO3_B4]",
+		"header2-pin39 [GPIO3_B5]", "", "",
+		/* GPIO3_C0 - C7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO3_D0 - D7 */
+		"", "", "", "", "", "", "", "";
+};
+
 &i2c1 {
 	status = "okay";
 };
@@ -250,61 +312,3 @@
 &wdt {
 	status = "okay";
 };
-
-&gpio0 {
-	gpio-line-names =
-	/* GPIO0_A0 - A7 */
-	"", "", "", "", "", "", "", "",
-	/* GPIO0_B0 - B7 */
-	"", "", "", "header1-pin3 [GPIO0_B3]", "header1-pin5 [GPIO0_B4]",
-	"", "", "header1-pin11 [GPIO0_B7]",
-	/* GPIO0_C0 - C7 */
-	"header1-pin13 [GPIO0_C0]", "header1-pin15 [GPIO0_C1]", "", "", "",
-	"", "", "",
-	/* GPIO0_D0 - D8 */
-	"", "", "", "", "", "", "", "";
-};
-
-&gpio1 {
-	gpio-line-names =
-	/* GPIO1_A0 - A7 */
-	"", "", "", "", "", "", "", "",
-	/* GPIO1_B0 - B7 */
-	"", "", "", "", "", "", "", "",
-	/* GPIO1_C0 - C7 */
-	"", "", "", "", "", "", "header1-pin21 [GPIO1_C6]",
-	"header1-pin19 [GPIO1_C7]",
-	/* GPIO1_D0 - D8 */
-	"header1-pin23 [GPIO1_D0]", "header1-pin24 [GPIO1_D1]", "", "", "",
-	"", "", "";
-};
-
-&gpio2 {
-	gpio-line-names =
-	/* GPIO2_A0 - A7 */
-	"header1-pin10 [GPIO2_A0]", "header1-pin8 [GPIO2_A1]", "", "",
-	"header1-pin7 [GPIO2_A4]", "header1-pin12 [GPIO2_A5]",
-	"header2-pin46 [GPIO2_A6]", "header1-pin22 [GPIO1_A7]",
-	/* GPIO2_B0 - B7 */
-	"header2-pin45 [GPIO2_B0]", "header1-pin18 [GPIO2_B1]",
-	"header1-pin16 [GPIO2_B2]", "header2-pin44 [GPIO2_B3]",
-	"header2-pin43 [GPIO2_B4]", "header2-pin28 [GPIO2_B5]",
-	"header2-pin30 [GPIO2_B6]", "header2-pin32 [GPIO2_B7]",
-	/* GPIO2_C0 - C7 */
-	"header2-pin34 [GPIO2_C0]", "", "", "", "", "", "", "",
-	/* GPIO2_D0 - D8 */
-	"", "", "", "", "", "", "", "";
-};
-
-&gpio3 {
-	gpio-line-names =
-	/* GPIO3_A0 - A7 */
-	"", "", "", "", "", "", "", "",
-	/* GPIO3_B0 - B7 */
-	"", "", "header2-pin42 [GPIO3_B2]", "header2-pin41 [GPIO3_B3]",
-	"header2-pin40 [GPIO3_B4]", "header2-pin39 [GPIO3_B5]", "", "",
-	/* GPIO3_C0 - C7 */
-	"", "", "", "", "", "", "", "",
-	/* GPIO3_D0 - D8 */
-	"", "", "", "", "", "", "", "";
-};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
index 5d7d567283e5..4237f2ee8fee 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
@@ -26,9 +26,11 @@
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
 
+			motorcomm,auto-sleep-disabled;
 			motorcomm,clk-out-frequency-hz = <125000000>;
 			motorcomm,keep-pll-enabled;
-			motorcomm,auto-sleep-disabled;
+			motorcomm,rx-clk-drv-microamp = <5020>;
+			motorcomm,rx-data-drv-microamp = <5020>;
 
 			pinctrl-0 = <&eth_phy_reset_pin>;
 			pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
index 07f00af19aaf..3cda6c627b68 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
@@ -182,6 +182,59 @@
 	status = "okay";
 };
 
+&gpio0 {
+	gpio-line-names =
+		/* GPIO0_A0 - A7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO0_B0 - B7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO0_C0 - C7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO0_D0 - D7 */
+		"", "", "", "pin-15 [GPIO0_D3]", "", "", "", "";
+};
+
+&gpio1 {
+	gpio-line-names =
+		/* GPIO1_A0 - A7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO1_B0 - B7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO1_C0 - C7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO1_D0 - D7 */
+		"", "", "", "", "pin-07 [GPIO1_D4]", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		/* GPIO2_A0 - A7 */
+		"pin-08 [GPIO2_A0]", "pin-10 [GPIO2_A1]", "pin-11 [GPIO2_A2]",
+		"pin-13 [GPIO2-A3]", "pin-27 [GPIO2_A4]", "pin-28 [GPIO2_A5]",
+		"pin-33 [GPIO2_A6]", "",
+		/* GPIO2_B0 - B7 */
+		"", "", "", "", "pin-26 [GPIO2_B4]", "", "", "pin-36 [GPIO2_B7]",
+		/* GPIO2_C0 - C7 */
+		"pin-32 [GPIO2_C0]", "pin-35 [GPIO2_C1]", "pin-12 [GPIO2_C2]",
+		"pin-38 [GPIO2_C3]", "pin-29 [GPIO2_C4]", "pin-31 [GPIO2_C5]",
+		"pin-37 [GPIO2_C6]", "pin-40 [GPIO2_C7]",
+		/* GPIO2_D0 - D7 */
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		/* GPIO3_A0 - A7 */
+		"pin-23 [GPIO3_A0]", "pin-19 [GPIO3_A1]", "pin-21 [GPIO3_A2]",
+		"", "pin-03 [GPIO3_A4]", "", "pin-05 [GPIO3_A6]", "",
+		/* GPIO3_B0 - B7 */
+		"pin-24 [GPIO3_B0]", "", "", "", "", "", "", "",
+		/* GPIO3_C0 - C7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO3_D0 - D7 */
+		"", "", "", "", "", "", "", "";
+};
+
 &i2c1 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
index 115c14c0a3c6..18a98c4648ea 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include "rk3399-puma.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Theobroma Systems RK3399-Q7 SoM";
@@ -18,6 +19,38 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&haikou_keys_pin>;
+		pinctrl-names = "default";
+
+		button-batlow-n {
+			gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+			label = "BATLOW#";
+			linux,code = <KEY_BATTERY>;
+		};
+
+		button-slp-btn-n {
+			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>;
+			label = "SLP_BTN#";
+			linux,code = <KEY_SLEEP>;
+		};
+
+		button-wake-n {
+			gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>;
+			label = "WAKE#";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+
+		switch-lid-btn-n {
+			gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "LID_BTN#";
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+
 	leds {
 		pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>;
 
@@ -165,11 +198,8 @@
 };
 
 &pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&haikou_pin_hog>;
-
-	hog {
-		haikou_pin_hog: haikou-pin-hog {
+	buttons {
+		haikou_keys_pin: haikou-keys-pin {
 			rockchip,pins =
 			  /* LID_BTN */
 			  <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
@@ -177,7 +207,7 @@
 			  <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
 			  /* SLP_BTN# */
 			  <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
-			  /* BIOS_DISABLE# */
+			  /* WAKE# */
 			  <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index 574a775ca880..c08e69391c01 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -120,6 +120,20 @@
 	drive-impedance-ohm = <33>;
 };
 
+&gpio0 {
+	/*
+	 * The BIOS_DISABLE hog is a feedback pin for the actual status of the
+	 * signal. This usually represents the state of a switch on the baseboard.
+	 * The pin has a 10k pull-up resistor connected, so no pull-up setting is needed.
+	 */
+	bios-disable-hog {
+		gpios = <RK_PB0 GPIO_ACTIVE_HIGH>;
+		gpio-hog;
+		input;
+		line-name = "bios_disable";
+	};
+};
+
 &gmac {
 	assigned-clocks = <&cru SCLK_RMII_SRC>;
 	assigned-clock-parents = <&clkin_gmac>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
index 1c6d83b47cd2..6ecdf5d28339 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
@@ -455,7 +455,7 @@
 &pinctrl {
 	leds {
 		sys_led_pin: sys-status-led-pin {
-			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
new file mode 100644
index 000000000000..d4c70835e0fe
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "rk3588-coolpi-cm5.dtsi"
+
+/ {
+	model = "RK3588 CoolPi CM5 EVB";
+	compatible = "coolpi,pi-cm5-evb", "coolpi,pi-cm5", "rockchip,rk3588";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en>;
+		power-supply = <&vcc12v_dcin>;
+		pwms = <&pwm2 0 25000 0>;
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		green_led: led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_lcd: vcc3v3-lcd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_lcd";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcdpwr_en>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_pwren>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb30_otg: vcc5v0-usb30-otg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_otg";
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_otg_pwren>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+/* M.2 E-Key */
+&pcie2x1l1 {
+	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreq &pcie_wake &pcie_rst &wifi_pwron &bt_pwron>;
+	status = "okay";
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x2 {
+	reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+/* M.2 M-Key ssd */
+&pcie3x4 {
+	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+&pinctrl {
+	lcd {
+		lcdpwr_en: lcdpwr-en {
+			rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bl_en: bl-en {
+			rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usb_host_pwren: usb-host-pwren {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		usb_otg_pwren: usb-otg-pwren {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi {
+		bt_pwron: bt-pwron {
+			rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pcie_clkreq: pcie-clkreq {
+			rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pcie_rst: pcie-rst {
+			rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		wifi_pwron: wifi-pwron {
+			rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pcie_wake: pcie-wake {
+			rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_usb30_host>;
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_usb30_host>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi
new file mode 100644
index 000000000000..0b02f4d6e003
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi
@@ -0,0 +1,650 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588.dtsi"
+
+/ {
+	compatible = "coolpi,pi-cm5", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdio;
+		mmc2 = &sdmmc;
+		serial2 = &uart2;
+	};
+
+	analog-sound {
+		compatible = "audio-graph-card";
+		dais = <&i2s0_8ch_p0>;
+		label = "rk3588-es8316";
+		routing = "MIC2", "Mic Jack",
+			  "Headphones", "HPOL",
+			  "Headphones", "HPOR";
+		widgets = "Microphone", "Mic Jack",
+			  "Headphone", "Headphones";
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	avdd0v85_pcie20: avdd0v85-pcie20-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd0v85_pcie20";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <850000>;
+		vin-supply = <&vdd_0v85_s0>;
+	};
+
+	avdd1v8_pcie20: avdd1v8-pcie20-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd1v8_pcie20";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&avcc_1v8_s0>;
+	};
+
+	avdd0v75_pcie30: avdd0v75-pcie30-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd0v75_pcie30";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <750000>;
+		regulator-max-microvolt = <750000>;
+		vin-supply = <&avdd_0v75_s0>;
+	};
+
+	pcie30_avdd1v8: avdd1v8-pcie30-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&avcc_1v8_s0>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-rxid";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	pinctrl-names = "default";
+	rx_delay = <0x00>;
+	tx_delay = <0x43>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&i2c7 {
+	pinctrl-0 = <&i2c7m0_xfer>;
+	status = "okay";
+
+	es8316: audio-codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s0_8ch_p0_0>;
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+
+	i2s0_8ch_p0: port {
+		i2s0_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&mdio0 {
+	rgmii_phy: ethernet-phy@1 {
+		/* YT8531C/H */
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&yt8531_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* ethernet */
+&pcie2x1l2 {
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&yt6801_isolate>;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	yt6801 {
+		yt6801_isolate: yt6801-isolate {
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	yt8531 {
+		yt8531_rst: yt8531-rst {
+			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sdio;
+	no-sd;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency =